Граф коммитов

198 Коммитов

Автор SHA1 Сообщение Дата
Mike Frysinger e359dc24d3 sigma-firmware: loader for Analog Devices' SigmaStudio
Analog Devices' SigmaStudio can produce firmware blobs for devices with
these DSPs embedded (like some audio codecs).  Allow these device drivers
to easily parse and load them.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:15 -07:00
Linus Torvalds e16b396ce3 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (47 commits)
  doc: CONFIG_UNEVICTABLE_LRU doesn't exist anymore
  Update cpuset info & webiste for cgroups
  dcdbas: force SMI to happen when expected
  arch/arm/Kconfig: remove one to many l's in the word.
  asm-generic/user.h: Fix spelling in comment
  drm: fix printk typo 'sracth'
  Remove one to many n's in a word
  Documentation/filesystems/romfs.txt: fixing link to genromfs
  drivers:scsi Change printk typo initate -> initiate
  serial, pch uart: Remove duplicate inclusion of linux/pci.h header
  fs/eventpoll.c: fix spelling
  mm: Fix out-of-date comments which refers non-existent functions
  drm: Fix printk typo 'failled'
  coh901318.c: Change initate to initiate.
  mbox-db5500.c Change initate to initiate.
  edac: correct i82975x error-info reported
  edac: correct i82975x mci initialisation
  edac: correct commented info
  fs: update comments to point correct document
  target: remove duplicate include of target/target_core_device.h from drivers/target/target_core_hba.c
  ...

Trivial conflict in fs/eventpoll.c (spelling vs addition)
2011-03-18 10:37:40 -07:00
Linus Torvalds a5e6b135bd Merge branch 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6
* 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (50 commits)
  printk: do not mangle valid userspace syslog prefixes
  efivars: Add Documentation
  efivars: Expose efivars functionality to external drivers.
  efivars: Parameterize operations.
  efivars: Split out variable registration
  efivars: parameterize efivars
  efivars: Make efivars bin_attributes dynamic
  efivars: move efivars globals into struct efivars
  drivers:misc: ti-st: fix debugging code
  kref: Fix typo in kref documentation
  UIO: add PRUSS UIO driver support
  Fix spelling mistakes in Documentation/zh_CN/SubmittingPatches
  firmware: Fix unaligned memory accesses in dmi-sysfs
  firmware: Add documentation for /sys/firmware/dmi
  firmware: Expose DMI type 15 System Event Log
  firmware: Break out system_event_log in dmi-sysfs
  firmware: Basic dmi-sysfs support
  firmware: Add DMI entry types to the headers
  Driver core: convert platform_{get,set}_drvdata to static inline functions
  Translate linux-2.6/Documentation/magic-number.txt into Chinese
  ...
2011-03-16 15:05:40 -07:00
Mike Waychison 4fc756bd9d efivars: Expose efivars functionality to external drivers.
Signed-off-by: Mike Waychison <mikew@google.com>
Cc: Matt Domsch <Matt_Domsch@dell.com>,
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-14 08:40:51 -07:00
Mike Waychison 3295814d83 efivars: Parameterize operations.
Instead of letting efivars access struct efi directly when dealing with
variables, use an operations structure.  This allows a later change to
reuse the efivars logic without having to pretend to support everything
in struct efi.

Signed-off-by: Mike Waychison <mikew@google.com>
Cc: Matt Domsch <Matt_Domsch@dell.com>,
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-14 08:40:51 -07:00
Mike Waychison 76b53f7c8b efivars: Split out variable registration
In anticipation of re-using the variable facilities in efivars from
elsewhere, split out the registration and unregistration of struct
efivars from the rest of the EFI specific sysfs code.

Signed-off-by: Mike Waychison <mikew@google.com>
Cc: Matt Domsch <Matt_Domsch@dell.com>,
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-14 08:40:50 -07:00
Mike Waychison 4142ef146a efivars: parameterize efivars
Now that we all global variable state is encapsulated by struct efivars,
parameterize all functions to the efivars local to the control flow rather
than at file scope.  We do this by removing the variable "efivars" at file
scope and move its storage down to the end of the file.

Variables get at efivars by storing the efivars pointer within each
efivar_entry.  The "new_var" and "del_var" binary attribute files get at
the efivars through the private pointer.

Signed-off-by: Mike Waychison <mikew@google.com>
Cc: Matt Domsch <Matt_Domsch@dell.com>,
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-14 08:40:50 -07:00
Mike Waychison d502fbb0dc efivars: Make efivars bin_attributes dynamic
In preparation for encapsulating efivars, we need to have the
bin_attributes be dynamically allocated so that we can use their
->private fields to get back to the struct efivars structure.

Signed-off-by: Mike Waychison <mikew@google.com>
Cc: Matt Domsch <Matt_Domsch@dell.com>,
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-14 08:40:50 -07:00
Mike Waychison 29422693c4 efivars: move efivars globals into struct efivars
In preparation for abstracting out efivars to be usable by other similar
variable services, move the global lock, list and kset into a structure.
Later patches will change the scope of 'efivars' and have it be passed
by function argument.

Signed-off-by: Mike Waychison <mikew@google.com>
Cc: Matt Domsch <Matt_Domsch@dell.com>,
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-14 08:40:49 -07:00
Stuart Hayes dd65c736d1 dcdbas: force SMI to happen when expected
The dcdbas driver can do an I/O write to cause a SMI to occur.  The SMI handler
looks at certain registers and memory locations, so the SMI needs to happen
immediately.  On some systems I/O writes are posted, though, causing the SMI to
happen well after the "outb" occurred, which causes random failures.  Following
the "outb" with an "inb" forces the write to go through even if it is posted.

Signed-off-by: Stuart Hayes <stuart_hayes@yahoo.com>
Acked-by: Doug Warzecha <douglas_warzecha@dell.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-02 13:42:10 +01:00
Mike Waychison 66245ad025 firmware: Fix unaligned memory accesses in dmi-sysfs
DMI entries are arranged in memory back to back with no alignment
guarantees. This means that the struct dmi_header passed to callbacks
from dmi_walk() itself isn't byte aligned.  This causes problems on
architectures that expect aligned data, such as IA64.

The dmi-sysfs patchset introduced structure member accesses through this
passed in dmi_header.  Fix this by memcpy()ing the structures to
temporary locations on stack when inspecting/copying them.

Signed-off-by: Mike Waychison <mikew@google.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-25 16:10:03 -08:00
Mike Waychison a3857a5c98 firmware: Expose DMI type 15 System Event Log
The System Event Log described by DMI entry type 15 may be backed by
either memory or may be indirectly accessed via an IO index/data
register pair.

In order to get read access to this log, expose it in the
"system_event_log" sub-directory of type 15 DMI entries, ie:
/sys/firmware/dmi/entries/15-0/system_event_log/raw_event_log.

This commit handles both IO accessed and memory access system event
logs.  OEM specific access and GPNV support is explicitly not handled
and we error out in the logs when we do not recognize the access method.

Signed-off-by: Mike Waychison <mikew@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-25 12:02:34 -08:00
Mike Waychison 925a1da747 firmware: Break out system_event_log in dmi-sysfs
The optional type 15 entry of the DMI table describes a non-volatile
storage-backed system event log.

In preparation for the next commit which exposes the raw bits of the
event log to userland, create a new sub-directory within the dmi entry
called "system_event_log" and expose attribute files that describe the
event log itself.

Currently, only a single child object is permitted within a
dmi_sysfs_entry.  We simply point at this child from the dmi_sysfs_entry
if it exists.

Signed-off-by: Mike Waychison <mikew@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-25 12:02:13 -08:00
Mike Waychison 948af1f0bb firmware: Basic dmi-sysfs support
Introduce a new module "dmi-sysfs" that exports the broken out entries
of the DMI table through sysfs.

Entries are enumerated via dmi_walk() on module load, and are populated
as kobjects rooted at /sys/firmware/dmi/entries.

Entries are named "<type>-<instance>", where:
   <type>	: is the type of the entry, and
   <instance>	: is the ordinal count within the DMI table of that
		  entry type.  This instance is used in lieu the DMI
		  entry's handle as no assurances are made by the kernel
		  that handles are unique.

All entries export the following attributes:
   length	: The length of the formatted portion of the entry
   handle	: The handle given to this entry by the firmware
   raw		: The raw bytes of the entire entry, including the
		  formatted portion, the unformatted (strings) portion,
		  and the two terminating nul characters.
   type		: The DMI entry type
   instance	: The ordinal instance of this entry given its type.
   position	: The position ordinal of the entry within the table in
		  its entirety.

Entries in dmi-sysfs are kobject backed members called "struct
dmi_sysfs_entry" and belong to dmi_kset.  They are threaded through
entry_list (protected by entry_list_lock) so that we can find them at
cleanup time.

Signed-off-by: Mike Waychison <mikew@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-25 12:01:19 -08:00
Naga Chumbalkar 84e383b322 x86, dmi, debug: Log board name (when present) in dmesg/oops output
The "Type 2" SMBIOS record that contains Board Name is not
strictly required and may be absent in the SMBIOS on some
platforms.

( Please note that Type 2 is not listed in Table 3 in Sec 6.2
  ("Required Structures and Data") of the SMBIOS v2.7
  Specification. )

Use the Manufacturer Name (aka System Vendor) name.
Print Board Name only when it is present.

Before the fix:
  (i) dmesg output: DMI: /ProLiant DL380 G6, BIOS P62 01/29/2011
 (ii) oops output:  Pid: 2170, comm: bash Not tainted 2.6.38-rc4+ #3 /ProLiant DL380 G6

After the fix:
  (i) dmesg output: DMI: HP ProLiant DL380 G6, BIOS P62 01/29/2011
 (ii) oops output:  Pid: 2278, comm: bash Not tainted 2.6.38-rc4+ #4 HP ProLiant DL380 G6

Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com>
Reviewed-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: <stable@kernel.org> # .3x - good for debugging, please apply as far back as it applies cleanly
LKML-Reference: <20110214224423.2182.13929.sendpatchset@nchumbalkar.americas.hpqcorp.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-15 04:20:57 +01:00
David Rientjes 6a108a14fa kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option
is used to configure any non-standard kernel with a much larger scope than
only small devices.

This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes
references to the option throughout the kernel.  A new CONFIG_EMBEDDED
option is added that automatically selects CONFIG_EXPERT when enabled and
can be used in the future to isolate options that should only be
considered for embedded systems (RISC architectures, SLOB, etc).

Calling the option "EXPERT" more accurately represents its intention: only
expert users who understand the impact of the configuration changes they
are making should enable it.

Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: David Woodhouse <david.woodhouse@intel.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Greg KH <gregkh@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Robin Holt <holt@sgi.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-20 17:02:05 -08:00
Bjorn Helgaas 8881cdceb2 dmi: log board, system, and BIOS information
Put basic system information in the dmesg log.  There are lots of dmesg
logs on the web, and it would be useful if they contained this information
for debugging platform problems.  "BOARD/PRODUCT" format copied from
show_regs_common(), which is used in the oops path.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 18:03:05 -07:00
Linus Torvalds 229aebb873 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
  Update broken web addresses in arch directory.
  Update broken web addresses in the kernel.
  Revert "drivers/usb: Remove unnecessary return's from void functions" for musb gadget
  Revert "Fix typo: configuation => configuration" partially
  ida: document IDA_BITMAP_LONGS calculation
  ext2: fix a typo on comment in ext2/inode.c
  drivers/scsi: Remove unnecessary casts of private_data
  drivers/s390: Remove unnecessary casts of private_data
  net/sunrpc/rpc_pipe.c: Remove unnecessary casts of private_data
  drivers/infiniband: Remove unnecessary casts of private_data
  drivers/gpu/drm: Remove unnecessary casts of private_data
  kernel/pm_qos_params.c: Remove unnecessary casts of private_data
  fs/ecryptfs: Remove unnecessary casts of private_data
  fs/seq_file.c: Remove unnecessary casts of private_data
  arm: uengine.c: remove C99 comments
  arm: scoop.c: remove C99 comments
  Fix typo configue => configure in comments
  Fix typo: configuation => configuration
  Fix typo interrest[ing|ed] => interest[ing|ed]
  Fix various typos of valid in comments
  ...

Fix up trivial conflicts in:
	drivers/char/ipmi/ipmi_si_intf.c
	drivers/usb/gadget/rndis.c
	net/irda/irnet/irnet_ppp.c
2010-10-24 13:41:39 -07:00
Justin P. Mattock 631dd1a885 Update broken web addresses in the kernel.
The patch below updates broken web addresses in the kernel

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Finn Thain <fthain@telegraphics.com.au>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Dimitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Mike Frysinger <vapier.adi@gmail.com>
Acked-by: Ben Pfaff <blp@cs.stanford.edu>
Acked-by: Hans J. Koch <hjk@linutronix.de>
Reviewed-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-18 11:03:14 +02:00
Randy Dunlap 3e0f686e6b ibft: fix kconfig dependencies
Fix kconfig dependency warning to satisfy dependencies:

warning: (BE2ISCSI && SCSI_LOWLEVEL && PCI && SCSI && NET || ISCSI_IBFT && ISCSI_IBFT_FIND && SCSI) selects ISCSI_BOOT_SYSFS which has unmet direct dependencies (SCSI_LOWLEVEL && SCSI)

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
2010-10-14 11:16:40 -04:00
Linus Torvalds c29c08b598 Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (28 commits)
  [SCSI] qla4xxx: fix compilation warning
  [SCSI] make error handling more robust in the face of reservations
  [SCSI] tgt: fix warning
  [SCSI] drivers/message/fusion: Adjust confusing if indentation
  [SCSI] Return NEEDS_RETRY for eh commands with status BUSY
  [SCSI] ibmvfc: Driver version 1.0.9
  [SCSI] ibmvfc: Fix terminate_rport_io
  [SCSI] ibmvfc: Fix rport add/delete race resulting in oops
  [SCSI] lpfc 8.3.16: Change LPFC driver version to 8.3.16
  [SCSI] lpfc 8.3.16: FCoE Discovery and Failover Fixes
  [SCSI] lpfc 8.3.16: SLI Additions, updates, and code cleanup
  [SCSI] pm8001: introduce missing kfree
  [SCSI] qla4xxx: Update driver version to 5.02.00-k3
  [SCSI] qla4xxx: Added AER support for ISP82xx
  [SCSI] qla4xxx: Handle outstanding mbx cmds on hung f/w scenarios
  [SCSI] qla4xxx: updated mbx_sys_info struct to sync with FW 4.6.x
  [SCSI] qla4xxx: clear AF_DPC_SCHEDULED flage when exit from do_dpc
  [SCSI] qla4xxx: Stop firmware before doing init firmware.
  [SCSI] qla4xxx: Use the correct request queue.
  [SCSI] qla4xxx: set correct value in sess->recovery_tmo
  ...
2010-08-14 12:34:34 -07:00
Linus Torvalds 5e85308108 Merge branch 'stable/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft-2.6
* 'stable/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft-2.6:
  firmware: ibft depends on SCSI
  ibft: Kernel oops when rmmoding iscsi_ibft with no iBFT present.
2010-08-13 18:06:15 -07:00
Randy Dunlap 4cde752587 firmware: ibft depends on SCSI
Prevent build errors when SCSI is not enabled:

iscsi_ibft.c:(.init.text+0x548d): undefined reference to `iscsi_boot_create_initiator'
iscsi_ibft.c:(.init.text+0x54a9): undefined reference to `iscsi_boot_create_ethernet'
iscsi_ibft.c:(.init.text+0x54c5): undefined reference to `iscsi_boot_create_target'
iscsi_ibft.c:(.init.text+0x55ff): undefined reference to `iscsi_boot_destroy_kset'
iscsi_ibft.c:(.init.text+0x561e): undefined reference to `iscsi_boot_create_kset'
iscsi_ibft.c:(.exit.text+0xe2c): undefined reference to `iscsi_boot_destroy_kset'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
2010-08-11 16:41:43 -04:00
Konrad Rzeszutek Wilk a12415ff58 ibft: Kernel oops when rmmoding iscsi_ibft with no iBFT present.
We failed to check to see if actually allocated structures
to contain the iBFT structure and went ahead to dereference it.

This patch fixes the OOPS.

Reported-by:  "Jayamohan Kalickal" <jayamohank@serverengines.com>  
Tested-by: "Jayamohan Kalickal" <jayamohank@serverengines.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
Signed-off-by: Peter Jones <pjones@redhat.com>
2010-08-11 16:35:40 -04:00
Axel Lin 1986aaf828 edd: fix possible memory leak in edd_init() error path
The error may happen at any iteration of the for loop, this patch properly
unregisters already registed edd_devices in error path.

[akpm@linux-foundation.org: remove unneeded NULL test]
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-09 20:45:09 -07:00
Linus Torvalds 1cfd2bda8c Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (30 commits)
  PCI: update for owner removal from struct device_attribute
  PCI: Fix warnings when CONFIG_DMI unset
  PCI: Do not run NVidia quirks related to MSI with MSI disabled
  x86/PCI: use for_each_pci_dev()
  PCI: use for_each_pci_dev()
  PCI: MSI: Restore read_msi_msg_desc(); add get_cached_msi_msg_desc()
  PCI: export SMBIOS provided firmware instance and label to sysfs
  PCI: Allow read/write access to sysfs I/O port resources
  x86/PCI: use host bridge _CRS info on ASRock ALiveSATA2-GLAN
  PCI: remove unused HAVE_ARCH_PCI_SET_DMA_MAX_SEGMENT_{SIZE|BOUNDARY}
  PCI: disable mmio during bar sizing
  PCI: MSI: Remove unsafe and unnecessary hardware access
  PCI: Default PCIe ASPM control to on and require !EMBEDDED to disable
  PCI: kernel oops on access to pci proc file while hot-removal
  PCI: pci-sysfs: remove casts from void*
  ACPI: Disable ASPM if the platform won't provide _OSC control for PCIe
  PCI hotplug: make sure child bridges are enabled at hotplug time
  PCI hotplug: shpchp: Removed check for hotplug of display devices
  PCI hotplug: pciehp: Fixed return value sign for pciehp_unconfigure_device
  PCI: Don't enable aspm before drivers have had a chance to veto it
  ...
2010-08-06 11:44:36 -07:00
Mike Christie aab7a8fd19 [SCSI] iscsi boot: mv iscsi_boot_sysfs to drivers/scsi
iscsi_boot_sysfs does not depend on firmware. Any iscsi driver
can use it. This patch moves iscsi_boot_sysfs to the scsi
dir, so that it can be used on any arch with any driver.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Acked-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-08-06 10:45:07 -05:00
Axel Lin e3ed249af8 dcdbas: remove a redundant smi_data_buf_free in dcdbas_exit
smi_data_buf_free is called twice in current implementation.
The second call simply return because smi_data_buf is set to NULL in first call.
This patch removes the second smi_data_buf_free call.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-05 13:53:34 -07:00
Axel Lin 5b232f753a dmi-id: fix a memory leak in dmi_id_init error path
This patch adds a missing kfree(dmi_dev) in dmi_id_init error path.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-05 13:53:34 -07:00
Linus Torvalds 5abd9ccced Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft-2.6:
  ibft: Use IBFT_SIGN instead of open-coding the search string.
  ibft: convert iscsi_ibft module to iscsi boot lib
  ibft: separate ibft parsing from sysfs interface
  ibft: For UEFI machines actually do scan ACPI for iBFT.
  ibft: Update iBFT handling for v1.03 of the spec.
2010-08-04 11:25:58 -07:00
Narendra K 911e1c9b05 PCI: export SMBIOS provided firmware instance and label to sysfs
This patch exports SMBIOS provided firmware instance and label of
onboard PCI devices to sysfs.  New files are:
  /sys/bus/pci/devices/.../label which contains the firmware name for
the device in question, and
  /sys/bus/pci/devices/.../index which contains the firmware device type
instance for the given device.

Signed-off-by: Jordan Hargrave <jordan_hargrave@dell.com>
Signed-off-by: Narendra K <narendra_k@dell.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-07-30 09:36:01 -07:00
Chris Wright 2c3c8bea60 sysfs: add struct file* to bin_attr callbacks
This allows bin_attr->read,write,mmap callbacks to check file specific data
(such as inode owner) as part of any privilege validation.

Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:37:31 -07:00
Peter Jones 57a5f3c99c ibft: Use IBFT_SIGN instead of open-coding the search string.
We define IBFT_SIGN to "iBFT"; may as well use it.

Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
Signed-off-by: Peter Jones <pjones@redhat.com>
2010-05-12 10:33:09 -04:00
Mike Christie b33a84a384 ibft: convert iscsi_ibft module to iscsi boot lib
This patch just converts the iscsi_ibft module to the
iscsi boot sysfs lib module.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
Signed-off-by: Peter Jones <pjones@redhat.com>
2010-05-11 13:02:38 -04:00
Mike Christie ba4ee30c6c ibft: separate ibft parsing from sysfs interface
Not all iscsi drivers support ibft. For drivers like be2iscsi
that do not but are bootable through a vendor firmware specific
format/process this patch moves the sysfs interface from the ibft code
to a lib module. This then allows userspace tools to search for iscsi boot
info in a common place and in a common format.

ibft iscsi boot info is exported in the same place as it was
before: /sys/firmware/ibft.

vendor/fw boot info gets export in /sys/firmware/iscsi_bootX, where X is the
scsi host number of the HBA. Underneath these parent dirs, the
target, ethernet, and initiator dirs are the same as they were before.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
Signed-off-by: Peter Jones <pjones@redhat.com>
2010-05-11 13:02:38 -04:00
Konrad Rzeszutek Wilk 1303a35bfe ibft: For UEFI machines actually do scan ACPI for iBFT.
For machines with IBFT 1.03 do scan the ACPI table for 'iBFT'
or for 'IBFT'. If the machine is in UEFI mode, only do the ACPI
table scan. For all other machines (pre IBFT 1.03) do
a memory scan if not found in the ACPI tables.

Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
Tested-by: Mike Christie <michaelc@cs.wisc.edu>
2010-05-11 13:02:37 -04:00
Peter Jones 4e639fdf0d ibft: Update iBFT handling for v1.03 of the spec.
- Use struct acpi_table_ibft instead of struct ibft_table_header
- Don't do reserve_ibft_region() on UEFI machines (section 1.4.3.1)
- If ibft_addr isn't initialized when ibft_init() is called, check for
  ACPI-based tables.
- Fix compiler error when CONFIG_ACPI is not defined.

Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
2010-05-11 13:02:23 -04:00
Linus Torvalds fb1ae63577 Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip:
  x86: Fix double enable_IR_x2apic() call on SMP kernel on !SMP boards
  x86: Increase CONFIG_NODES_SHIFT max to 10
  ibft, x86: Change reserve_ibft_region() to find_ibft_region()
  x86, hpet: Fix bug in RTC emulation
  x86, hpet: Erratum workaround for read after write of HPET comparator
  bootmem, x86: Fix 32bit numa system without RAM on node 0
  nobootmem, x86: Fix 32bit numa system without RAM on node 0
  x86: Handle overlapping mptables
  x86: Make e820_remove_range to handle all covered case
  x86-32, resume: do a global tlb flush in S4 resume
2010-04-07 11:02:23 -07:00
Yinghai Lu 042be38e61 ibft, x86: Change reserve_ibft_region() to find_ibft_region()
This allows arch code could decide the way to reserve the ibft.

And we should reserve ibft as early as possible, instead of BOOTMEM
stage, in case the table is in RAM range and is not reserved by BIOS
(this will often be the case.)

Move to just after find_smp_config().

Also when CONFIG_NO_BOOTMEM=y, We will not have reserve_bootmem() anymore.

-v2: fix typo about ibft pointed by Konrad Rzeszutek Wilk <konrad@darnok.org>

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4BB510FB.80601@kernel.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Peter Jones <pjones@redhat.com>
Cc: Konrad Rzeszutek Wilk <konrad@kernel.org>
CC: Jan Beulich <jbeulich@novell.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-04-01 16:12:48 -07:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Emese Revfy 52cf25d0ab Driver core: Constify struct sysfs_ops in struct kobj_type
Constify struct sysfs_ops.

This is part of the ops structure constification
effort started by Arjan van de Ven et al.

Benefits of this constification:

 * prevents modification of data that is shared
   (referenced) by many other structure instances
   at runtime

 * detects/prevents accidental (but not intentional)
   modification attempts on archs that enforce
   read-only kernel data at runtime

 * potentially better optimized code as the compiler
   can assume that the const data cannot be changed

 * the compiler/linker move const data into .rodata
   and therefore exclude them from false sharing

Signed-off-by: Emese Revfy <re.emese@gmail.com>
Acked-by: David Teigland <teigland@redhat.com>
Acked-by: Matt Domsch <Matt_Domsch@dell.com>
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Acked-by: Hans J. Koch <hjk@linutronix.de>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-07 17:04:49 -08:00
akpm@linux-foundation.org d96ae53091 memory-hotplug: create /sys/firmware/memmap entry for new memory
A memmap is a directory in sysfs which includes 3 text files: start, end
and type.  For example:

start: 	0x100000
end:	0x7e7b1cff
type:	System RAM

Interface firmware_map_add was not called explicitly.  Remove it and add
function firmware_map_add_hotplug as hotplug interface of memmap.

Each memory entry has a memmap in sysfs, When we hot-add new memory, sysfs
does not export memmap entry for it.  We add a call in function add_memory
to function firmware_map_add_hotplug.

Add a new function add_sysfs_fw_map_entry() to create memmap entry, it
will be called when initialize memmap and hot-add memory.

[akpm@linux-foundation.org: un-kernedoc a no longer kerneldoc comment]
Signed-off-by: Shaohui Zheng <shaohui.zheng@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Reviewed-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 11:26:25 -08:00
David S. Miller 47871889c6 Merge branch 'master' of /home/davem/src/GIT/linux-2.6/
Conflicts:
	drivers/firmware/iscsi_ibft.c
2010-02-28 19:23:06 -08:00
Joe Perches 00e7825b94 drivers/firmware/iscsi_ibft.c: remove NIPQUAD_FMT, use %pI4
Convert netmask to __be32 and format it with %pI4

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Konrad Rzeszutek <ketuzsezr@darnok.org>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: Peter Jones <pjones@redhat.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2010-02-26 21:02:14 +00:00
hartleys 2c35294853 drivers/firmware/iscsi_ibft.c: use %pM to show MAC address
Use the %pM kernel extension to display the MAC address.

Also, remove the 'mac' variable and use nic->mac directly.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Peter Jones <pjones@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-07 01:13:56 -08:00
Mike Frysinger 9b6e3e42a4 firmware: only allow EDD on x86
Rather than have the EDD depend on !ia64 (and assuming that only ia64,
x86, x86_64 will be including this Kconfig), have EDD depend on the only
arches which can support this code.  This should allow all other arches to
cleanly include the firmware Kconfig.

Also simplify the x86 string used by FIRMWARE_MEMMAP to match EDD.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Matt Domsch <Matt_Domsch@dell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:34 -08:00
Joe Perches bc058f65e8 drivers/firmware/dmi_scan.c: use %pUB to print UUIDs
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Jeff Garzik <jgarzik@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:33 -08:00
Johannes Berg 9ebfbd45f9 firmware_class: make request_firmware_nowait more useful
Unfortunately, one cannot hold on to the struct firmware
that request_firmware_nowait() hands off, which is needed
in some cases. Allow this by requiring the callback to
free it (via release_firmware).

Additionally, give it a gfp_t parameter -- all the current
users call it from a GFP_KERNEL context so the GFP_ATOMIC
isn't necessary. This also marks an API break which is
useful in a sense, although that is obviously not the
primary purpose of this change.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Cc: Ming Lei <tom.leiming@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Woodhouse <David.Woodhouse@intel.com>
Cc: Pavel Roskin <proski@gnu.org>
Cc: Abhay Salunke <abhay_salunke@dell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11 11:24:52 -08:00
Dmitry Torokhov 75757507e0 DMI: allow omitting ident strings in DMI tables
The purpose of dmi->ident is twofold - it may be used by DMI callback
functions when composing log messages; it is also used to determine
end of DMI table in dmi_check_system() and dmi_first_match(). However,
in case when callbacks are not interested in using ident at all it just
wastes memory. Let's make entries with empty first match slot serve as
end-of-table markers instead.

Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-04 22:10:59 -08:00
Jan Beulich ed3c661448 iSCSI/iBFT: use proper address translation
In virtual environments (namely, Xen Dom0) virt <-> phys and
virt <-> isa-bus translations cannot be freely interchanged (and
even outside such environments it is not really correct to do so).
When looking at memory below 1M, the latter translations should
always be used.

iscsi_ibft_find.c part from: Martin Wilck <martin.wilck@ts.fujitsu.com>.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Konrad Rzeszutek Wilk <ketuzsezs@darnok.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-05 12:05:40 -07:00