Now that swiotlb remembers the allocation size there is no need to pass
it back to swiotlb_tbl_unmap_single.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Pull swiotlb updates from Konrad Rzeszutek Wilk:
"Two memory encryption related patches (SWIOTLB is enabled by default
for AMD-SEV):
- Add support for alignment so that NVME can properly work
- Keep track of requested DMA buffers length, as underlaying hardware
devices can trip SWIOTLB to bounce too much and crash the kernel
And a tiny fix to use proper APIs in drivers"
* 'stable/for-linus-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
swiotlb: Validate bounce size in the sync/unmap path
nvme-pci: set min_align_mask
swiotlb: respect min_align_mask
swiotlb: don't modify orig_addr in swiotlb_tbl_sync_single
swiotlb: refactor swiotlb_tbl_map_single
swiotlb: clean up swiotlb_tbl_unmap_single
swiotlb: factor out a nr_slots helper
swiotlb: factor out an io_tlb_offset helper
swiotlb: add a IO_TLB_SIZE define
driver core: add a min_align_mask field to struct device_dma_parameters
sdhci: stop poking into swiotlb internals
The size of the buffer being bounced is not checked if it happens
to be larger than the size of the mapped buffer. Because the size
can be controlled by a device, as it's the case with virtio devices,
this can lead to memory corruption.
This patch saves the remaining buffer memory for each slab and uses
that information for validation in the sync/unmap paths before
swiotlb_bounce is called.
Validating this argument is important under the threat models of
AMD SEV-SNP and Intel TDX, where the HV is considered untrusted.
Signed-off-by: Martin Radev <martin.b.radev@gmail.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Respect the min_align_mask in struct device_dma_parameters in swiotlb.
There are two parts to it:
1) for the lower bits of the alignment inside the io tlb slot, just
extent the size of the allocation and leave the start of the slot
empty
2) for the high bits ensure we find a slot that matches the high bits
of the alignment to avoid wasting too much memory
Based on an earlier patch from Jianxiong Gao <jxgao@google.com>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jianxiong Gao <jxgao@google.com>
Tested-by: Jianxiong Gao <jxgao@google.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
- add support to emulate processing delays in the DMA API benchmark
selftest (Barry Song)
- remove support for non-contiguous noncoherent allocations,
which aren't used and will be replaced by a different API
-----BEGIN PGP SIGNATURE-----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=papz
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.12' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- add support to emulate processing delays in the DMA API benchmark
selftest (Barry Song)
- remove support for non-contiguous noncoherent allocations, which
aren't used and will be replaced by a different API
* tag 'dma-mapping-5.12' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: remove the {alloc,free}_noncoherent methods
dma-mapping: benchmark: pretend DMA is transmitting
swiotlb_tbl_map_single currently nevers sets a tlb_addr that is not
aligned to the tlb bucket size. But we're going to add such a case
soon, for which this adjustment would be bogus.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jianxiong Gao <jxgao@google.com>
Tested-by: Jianxiong Gao <jxgao@google.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Split out a bunch of a self-contained helpers to make the function easier
to follow.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jianxiong Gao <jxgao@google.com>
Tested-by: Jianxiong Gao <jxgao@google.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
- added support for Realtek RTL83XX SoCs
- kaslr support for Loongson64
- first steps to get rid of set_fs()
- DMA runtime coherent/non-coherent selection cleanup
- cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=kQfQ
-----END PGP SIGNATURE-----
Merge tag 'mips_5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
- added support for Nintendo N64
- added support for Realtek RTL83XX SoCs
- kaslr support for Loongson64
- first steps to get rid of set_fs()
- DMA runtime coherent/non-coherent selection cleanup
- cleanups and fixes
* tag 'mips_5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (98 commits)
Revert "MIPS: Add basic support for ptrace single step"
vmlinux.lds.h: catch more UBSAN symbols into .data
MIPS: kernel: Drop kgdb_call_nmi_hook
MAINTAINERS: Add git tree for KVM/mips
MIPS: Use common way to parse elfcorehdr
MIPS: Simplify EVA cache handling
Revert "MIPS: kernel: {ftrace,kgdb}: Set correct address limit for cache flushes"
MIPS: remove CONFIG_DMA_PERDEV_COHERENT
MIPS: remove CONFIG_DMA_MAYBE_COHERENT
driver core: lift dma_default_coherent into common code
MIPS: refactor the runtime coherent vs noncoherent DMA indicators
MIPS/alchemy: factor out the DMA coherent setup
MIPS/malta: simplify plat_setup_iocoherency
MIPS: Add basic support for ptrace single step
MAINTAINERS: replace non-matching patterns for loongson{2,3}
MIPS: Make check condition for SDBBP consistent with EJTAG spec
mips: Replace lkml.org links with lore
Revert "MIPS: microMIPS: Fix the judgment of mm_jr16_op and mm_jalr_op"
MIPS: crash_dump.c: Simplify copy_oldmem_page()
Revert "mips: Manually call fdt_init_reserved_mem() method"
...
Remove a layer of pointless indentation, replace a hard to follow
ternary expression with a plain if/else.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jianxiong Gao <jxgao@google.com>
Tested-by: Jianxiong Gao <jxgao@google.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Factor out a helper to find the number of slots for a given size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jianxiong Gao <jxgao@google.com>
Tested-by: Jianxiong Gao <jxgao@google.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Replace the very genericly named OFFSET macro with a little inline
helper that hardcodes the alignment to the only value ever passed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jianxiong Gao <jxgao@google.com>
Tested-by: Jianxiong Gao <jxgao@google.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Add a new IO_TLB_SIZE define instead open coding it using
IO_TLB_SHIFT all over.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jianxiong Gao <jxgao@google.com>
Tested-by: Jianxiong Gao <jxgao@google.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Lift the dma_default_coherent variable from the mips architecture code
to the driver core. This allows an architecture to sdefault all device
to be DMA coherent at run time, even if the kernel is build with support
for DMA noncoherent device. By allowing device_initialize to set the
->dma_coherent field to this default the amount of arch hooks required
for this behavior can be greatly reduced.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
It turns out allowing non-contigous allocations here was a rather bad
idea, as we'll now need to define ways to get the pages for mmaping
or dma_buf sharing. Revert this change and stick to the original
concept. A different API for the use case of non-contigous allocations
will be added back later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Tested-by: Ricardo Ribalda <ribalda@chromium.org>:wq
In a real dma mapping user case, after dma_map is done, data will be
transmit. Thus, in multi-threaded user scenario, IOMMU contention
should not be that severe. For example, if users enable multiple
threads to send network packets through 1G/10G/100Gbps NIC, usually
the steps will be: map -> transmission -> unmap. Transmission delay
reduces the contention of IOMMU.
Here a delay is added to simulate the transmission between map and unmap
so that the tested result could be more accurate for TX and simple RX.
A typical TX transmission for NIC would be like: map -> TX -> unmap
since the socket buffers come from OS. Simple RX model eg. disk driver,
is also map -> RX -> unmap, but real RX model in a NIC could be more
complicated considering packets can come spontaneously and many drivers
are using pre-mapped buffers pool. This is in the TBD list.
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The original code put five u32 before a u64 expansion[10] array. Five is
odd, this will cause trouble in the extension of the structure by adding
new features. This patch moves to use u8 for reserved field to avoid
future alignment risk.
Meanwhile, it also clears the memory of struct map_benchmark in tools,
otherwise, if users use old version to run on newer kernel, the random
expansion value will cause side effect on newer kernel.
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
- support for a partial IOMMU bypass (Alexey Kardashevskiy)
- add a DMA API benchmark (Barry Song)
- misc fixes (Tiezhu Yang, tangjianqiang)
-----BEGIN PGP SIGNATURE-----
iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAl/iF+wLHGhjaEBsc3Qu
ZGUACgkQD55TZVIEUYP/HQ//beE+HGi0+5yiWdLY/Q3nqT/VExgdY2CAE2en0jcs
kpUEZPfhE2dlKPf9nBl+ZsLIgqIwVP+oSawxZ65r0z/w95vgWANAmBg2m/FcnEUx
Vl6jUUPmViY0AGzMR1+55voNNor4aX9rLUdZEN+vBy62Z6fvQVmKOtVPUf0ekkUh
n3factrKIt7mplsIgJPO3v6G2XHugBaNmcrp9LkkmhniYkH8S31l4uKCSKI+6atT
CsTTVqpQ+qVAyrgp30Xs+N9QoOefI4tFdXmvXzIIFe3JyDvIpniaiT+HHVXuEQJR
5Yukj9sKJXS1ipjc+yWsjvn4Wax/tubJ7eqIo9alsIkcJXI3AlKljwBtFrKPMq+L
NK54N3N31A+/hrxOLQyfqz5vH6cUicFr7STIedb8pD3y3/f/tiP+/qown6Wj3rB/
E0IlCK5w87OVrJT1f5fHxh9Xe4R2W9rpeU/v/AZ/DrQllwp3PbG0kWqu3m4mujih
CF3D+rOoB5tNtBxrNU+TpOVm+OOdX1IDtBleKePHTTIQeBY3p3UZuwINO0axFr9p
oQndj1fiYvRwI6GS31GPpduFG7PrrwCb5zD0Rm07+aNCIoSmu+ADEngfgxnj/rGz
q+c9Te1dDn58OktkiEONPNu+iuGBxhBR7AeP6UDdcC1vkO/hvW2HnppSY0qiWthU
IFY=
=dOug
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.11' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- support for a partial IOMMU bypass (Alexey Kardashevskiy)
- add a DMA API benchmark (Barry Song)
- misc fixes (Tiezhu Yang, tangjianqiang)
* tag 'dma-mapping-5.11' of git://git.infradead.org/users/hch/dma-mapping:
selftests/dma: add test application for DMA_MAP_BENCHMARK
dma-mapping: add benchmark support for streaming DMA APIs
dma-contiguous: fix a typo error in a comment
dma-pool: no need to check return value of debugfs_create functions
powerpc/dma: Fallback to dma_ops when persistent memory present
dma-mapping: Allow mixing bypass and mapped DMA operation
There are a couple of subsystems maintained by other people that
merge their drivers through the SoC tree, those changes include:
- The SCMI firmware framework gains support for sensor notifications
and for controlling voltage domains.
- A large update for the Tegra memory controller driver, integrating
it better with the interconnect framework
- The memory controller subsystem gains support for Mediatek MT8192
- The reset controller framework gains support for sharing pulsed
resets
For Soc specific drivers in drivers/soc, the main changes are
- The Allwinner/sunxi MBUS gets a rework for the way it handles
dma_map_ops and offsets between physical and dma address spaces.
- An errata fix plus some cleanups for Freescale Layerscape SoCs
- A cleanup for renesas drivers regarding MMIO accesses.
- New SoC specific drivers for Mediatek MT8192 and MT8183 power domains
- New SoC specific drivers for Aspeed AST2600 LPC bus control
and SoC identification.
- Core Power Domain support for Qualcomm MSM8916, MSM8939, SDM660
and SDX55.
- A rework of the TI AM33xx 'genpd' power domain support to use
information from DT instead of platform data
- Support for TI AM64x SoCs
- Allow building some Amlogic drivers as modules instead of built-in
Finally, there are numerous cleanups and smaller bug fixes for
Mediatek, Tegra, Samsung, Qualcomm, TI OMAP, Amlogic, Rockchips,
Renesas, and Xilinx SoCs.
There is a trivial conflict in the cedrus driver, with two branches
adding the same CEDRUS_CAPABILITY_H265_DEC flag, and another trivial
remove/remove conflict in linux/dma-mapping.h.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl/alSUACgkQmmx57+YA
GNm7GRAAlNMVi7F0f4Ixf1bEh+J2QUonYIpZfrdxOLFwISGQ+nstGrFW2He/OeQv
KAi027tZLl6Sdzjy809cLDPA4Z2IKwjVWhEbBHybvy1+irPYjnixtLd0x3YvPhjH
iadlcjQ3uaGue8PvubK6CVnBEy82A+Pp29n9i4A4wX/8w+BVIhVsxwQWUBF8pFXE
3La2UZYZMVMvVZMrpTOqwCgdmLDCk+RLMVZ1IiRqBEBq5/DVq03uIXgjGEOrq8tl
PXC89w7K510Is891mbBdBThQf+pZkU1vwORuknDcEJKWs9ngbEha7ebVgp32kbFl
pi8DEK205d106WQgfn0Zxkpbsp8XD058wDILwkhBcteXlBaUEL6btGVLDTUCJZuv
/pkH8tL4lNGpThQFbCEXC8oHZBp2xk55P+SW9RRZOoA5tAp+sz7hlf3y3YKdCSxv
4xybeeVOAgjl01WtbEC7CuIkqcKVSQ7njhLhC8r5ASteNywDThqxLT6nd0VegcQc
YH3Eu9QRXpvFwQ35zMkTMWa27bMG5d60fp90bWT0R5amXZpxJJot87w8trFCxv74
mE5KvCbefCRNsTt8GOBA/WR7hVaG369g07qOvs7g4LjJEM3Nl2h/A4/zVFef9O0t
yq3Nm4YCGfDSAQXzGR2SJ3nxiqbDknzJTAtZPf4BmbaMuPOIJ5k=
=BjJf
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"There are a couple of subsystems maintained by other people that merge
their drivers through the SoC tree, those changes include:
- The SCMI firmware framework gains support for sensor notifications
and for controlling voltage domains.
- A large update for the Tegra memory controller driver, integrating
it better with the interconnect framework
- The memory controller subsystem gains support for Mediatek MT8192
- The reset controller framework gains support for sharing pulsed
resets
For Soc specific drivers in drivers/soc, the main changes are
- The Allwinner/sunxi MBUS gets a rework for the way it handles
dma_map_ops and offsets between physical and dma address spaces.
- An errata fix plus some cleanups for Freescale Layerscape SoCs
- A cleanup for renesas drivers regarding MMIO accesses.
- New SoC specific drivers for Mediatek MT8192 and MT8183 power
domains
- New SoC specific drivers for Aspeed AST2600 LPC bus control and SoC
identification.
- Core Power Domain support for Qualcomm MSM8916, MSM8939, SDM660 and
SDX55.
- A rework of the TI AM33xx 'genpd' power domain support to use
information from DT instead of platform data
- Support for TI AM64x SoCs
- Allow building some Amlogic drivers as modules instead of built-in
Finally, there are numerous cleanups and smaller bug fixes for
Mediatek, Tegra, Samsung, Qualcomm, TI OMAP, Amlogic, Rockchips,
Renesas, and Xilinx SoCs"
* tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (222 commits)
soc: mediatek: mmsys: Specify HAS_IOMEM dependency for MTK_MMSYS
firmware: xilinx: Properly align function parameter
firmware: xilinx: Add a blank line after function declaration
firmware: xilinx: Remove additional newline
firmware: xilinx: Fix kernel-doc warnings
firmware: xlnx-zynqmp: fix compilation warning
soc: xilinx: vcu: add missing register NUM_CORE
soc: xilinx: vcu: use vcu-settings syscon registers
dt-bindings: soc: xlnx: extract xlnx, vcu-settings to separate binding
soc: xilinx: vcu: drop useless success message
clk: samsung: mark PM functions as __maybe_unused
soc: samsung: exynos-chipid: initialize later - with arch_initcall
soc: samsung: exynos-chipid: order list of SoCs by name
memory: jz4780_nemc: Fix potential NULL dereference in jz4780_nemc_probe()
memory: ti-emif-sram: only build for ARMv7
memory: tegra30: Support interconnect framework
memory: tegra20: Support hardware versioning and clean up OPP table initialization
dt-bindings: memory: tegra20-emc: Document opp-supported-hw property
soc: rockchip: io-domain: Fix error return code in rockchip_iodomain_probe()
reset-controller: ti: force the write operation when assert or deassert
...
Pull swiotlb update from Konrad Rzeszutek Wilk:
"A generic (but for right now engaged only with AMD SEV) mechanism to
adjust a larger size SWIOTLB based on the total memory of the SEV
guests which right now require the bounce buffer for interacting with
the outside world.
Normal knobs (swiotlb=XYZ) still work"
* 'stable/for-linus-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
x86,swiotlb: Adjust SWIOTLB bounce buffer size for SEV guests
For SEV, all DMA to and from guest has to use shared (un-encrypted) pages.
SEV uses SWIOTLB to make this happen without requiring changes to device
drivers. However, depending on the workload being run, the default 64MB
of it might not be enough and it may run out of buffers to use for DMA,
resulting in I/O errors and/or performance degradation for high
I/O workloads.
Adjust the default size of SWIOTLB for SEV guests using a
percentage of the total memory available to guest for the SWIOTLB buffers.
Adds a new sev_setup_arch() function which is invoked from setup_arch()
and it calls into a new swiotlb generic code function swiotlb_adjust_size()
to do the SWIOTLB buffer adjustment.
v5 fixed build errors and warnings as
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Co-developed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Nowadays, there are increasing requirements to benchmark the performance
of dma_map and dma_unmap particually while the device is attached to an
IOMMU.
This patch enables the support. Users can run specified number of threads
to do dma_map_page and dma_unmap_page on a specific NUMA node with the
specified duration. Then dma_map_benchmark will calculate the average
latency for map and unmap.
A difficulity for this benchmark is that dma_map/unmap APIs must run on
a particular device. Each device might have different backend of IOMMU or
non-IOMMU.
So we use the driver_override to bind dma_map_benchmark to a particual
device by:
For platform devices:
echo dma_map_benchmark > /sys/bus/platform/devices/xxx/driver_override
echo xxx > /sys/bus/platform/drivers/xxx/unbind
echo xxx > /sys/bus/platform/drivers/dma_map_benchmark/bind
For PCI devices:
echo dma_map_benchmark > /sys/bus/pci/devices/0000:00:01.0/driver_override
echo 0000:00:01.0 > /sys/bus/pci/drivers/xxx/unbind
echo 0000:00:01.0 > /sys/bus/pci/drivers/dma_map_benchmark/bind
Cc: Will Deacon <will@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
[hch: folded in two fixes from Colin Ian King <colin.king@canonical.com>]
Signed-off-by: Christoph Hellwig <hch@lst.de>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
At the moment we allow bypassing DMA ops only when we can do this for
the entire RAM. However there are configs with mixed type memory
where we could still allow bypassing IOMMU in most cases;
POWERPC with persistent memory is one example.
This adds an arch hook to determine where bypass can still work and
we invoke direct DMA API. The following patch checks the bus limit
on POWERPC to allow or disallow direct mapping.
This adds a ARCH_HAS_DMA_MAP_DIRECT config option to make the arch_xxxx
hooks no-op by default.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Christoph Hellwig <hch@lst.de>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl+69egeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGTSYH/ifRBlaxy5UiHFc0
2zdR7pkjWrYfDTTT3sazIAhdlzzcfnkUqgFxOP45F4ZIqeTzunH3sUY+5UlT9IX7
liUgnLxQ/1R9Gx8kPGQfu+tLCey78xVFydGsqJoW9sPRw2R+apMdGGa/lOrk+OXz
DXIN+dDnGFqwCCNJpK+rxQQhFf++IPpSI8z6Y23moOFhsDZrEziHuVFy2FGyRM6z
prZ/us/tcobE8ptCk1RmOxLoJ1DR6UxpA2vLimTE+JD8siOsSWPbjE0KudnWCnd5
BLqIjrsPJbSxyuzzK3v9dnO5wMv7tMDuMIuYM/MQTXDttNwtsqt/aP6gdnUCym7N
5eHEj5g=
=MuO1
-----END PGP SIGNATURE-----
Merge tag 'v5.10-rc5' into rdma.git for-next
For dependencies in following patches
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Drop the dma_direct_set_offset export and move the declaration to
dma-map-ops.h now that the Allwinner drivers have stopped calling it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Now that the RDMA core deals with devices that only do DMA mapping in
lower layers properly, there is no user for dma_virt_ops and it can be
removed.
Link: https://lore.kernel.org/r/20201106181941.1878556-11-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The tbl_dma_addr argument is used to check the DMA boundary for the
allocations, and thus needs to be a dma_addr_t. swiotlb-xen instead
passed a physical address, which could lead to incorrect results for
strange offsets. Fix this by removing the parameter entirely and hard
code the DMA address for io_tlb_start instead.
Fixes: 91ffe4ad53 ("swiotlb-xen: introduce phys_to_dma/dma_to_phys translations")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
kernel/dma/swiotlb.c:swiotlb_init gets called first and tries to
allocate a buffer for the swiotlb. It does so by calling
memblock_alloc_low(PAGE_ALIGN(bytes), PAGE_SIZE);
If the allocation must fail, no_iotlb_memory is set.
Later during initialization swiotlb-xen comes in
(drivers/xen/swiotlb-xen.c:xen_swiotlb_init) and given that io_tlb_start
is != 0, it thinks the memory is ready to use when actually it is not.
When the swiotlb is actually needed, swiotlb_tbl_map_single gets called
and since no_iotlb_memory is set the kernel panics.
Instead, if swiotlb-xen.c:xen_swiotlb_init knew the swiotlb hadn't been
initialized, it would do the initialization itself, which might still
succeed.
Fix the panic by setting io_tlb_start to 0 on swiotlb initialization
failure, and also by setting no_iotlb_memory to false on swiotlb
initialization success.
Fixes: ac2cbab21f ("x86: Don't panic if can not alloc buffer for swiotlb")
Reported-by: Elliott Mitchell <ehem+xen@m5p.com>
Tested-by: Elliott Mitchell <ehem+xen@m5p.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Due to a mismerge a bunch of prototypes that should have moved to
dma-map-ops.h are still in dma-mapping.h, fix that up.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Fix multiple occurrences of duplicated words in kernel/.
Fix one typo/spello on the same line as a duplicate word. Change one
instance of "the the" to "that the". Otherwise just drop one of the
repeated words.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/98202fa6-8919-ef63-9efe-c0fad5ca7af1@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- rework the non-coherent DMA allocator
- move private definitions out of <linux/dma-mapping.h>
- lower CMA_ALIGNMENT (Paul Cercueil)
- remove the omap1 dma address translation in favor of the common
code
- make dma-direct aware of multiple dma offset ranges (Jim Quinlan)
- support per-node DMA CMA areas (Barry Song)
- increase the default seg boundary limit (Nicolin Chen)
- misc fixes (Robin Murphy, Thomas Tai, Xu Wang)
- various cleanups
-----BEGIN PGP SIGNATURE-----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=Bkf/
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- rework the non-coherent DMA allocator
- move private definitions out of <linux/dma-mapping.h>
- lower CMA_ALIGNMENT (Paul Cercueil)
- remove the omap1 dma address translation in favor of the common code
- make dma-direct aware of multiple dma offset ranges (Jim Quinlan)
- support per-node DMA CMA areas (Barry Song)
- increase the default seg boundary limit (Nicolin Chen)
- misc fixes (Robin Murphy, Thomas Tai, Xu Wang)
- various cleanups
* tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits)
ARM/ixp4xx: add a missing include of dma-map-ops.h
dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling
dma-direct: factor out a dma_direct_alloc_from_pool helper
dma-direct check for highmem pages in dma_direct_alloc_pages
dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h>
dma-mapping: move large parts of <linux/dma-direct.h> to kernel/dma
dma-mapping: move dma-debug.h to kernel/dma/
dma-mapping: remove <asm/dma-contiguous.h>
dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h>
dma-contiguous: remove dma_contiguous_set_default
dma-contiguous: remove dev_set_cma_area
dma-contiguous: remove dma_declare_contiguous
dma-mapping: split <linux/dma-mapping.h>
cma: decrease CMA_ALIGNMENT lower limit to 2
firewire-ohci: use dma_alloc_pages
dma-iommu: implement ->alloc_noncoherent
dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods
dma-mapping: add a new dma_alloc_pages API
dma-mapping: remove dma_cache_sync
53c700: convert to dma_alloc_noncoherent
...
Pull swiotlb updates from Konrad Rzeszutek Wilk:
"Minor enhancement of using %p to print phys_addr_r and also compiler
warnings"
* 'stable/for-linus-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
swiotlb: Mark max_segment with static keyword
swiotlb: Declare swiotlb_late_init_with_default_size() in header
swiotlb: Use %pa to print phys_addr_t variables
The memory size calculation in cma_early_percent_memory() traverses
memblock.memory rather than simply call memblock_phys_mem_size(). The
comment in that function suggests that at some point there should have
been call to memblock_analyze() before memblock_phys_mem_size() could be
used. As of now, there is no memblock_analyze() at all and
memblock_phys_mem_size() can be used as soon as cold-plug memory is
registered with memblock.
Replace loop over memblock.memory with a call to memblock_phys_mem_size().
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-3-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use and entirely separate code path for the DMA_ATTR_NO_KERNEL_MAPPING
path. This avoids any confusion about the ret type, and avoids lots of
attr checks and helpers that can be significantly simplified now.
It also ensures that common handling is applied to architetures still
using the arch alloc/free hooks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
This ensures dma_direct_alloc_pages will use the right gfp mask, as
well as keeping the code for that common between the two allocators.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Most of the dma_direct symbols should only be used by direct.c and
mapping.c, so move them to kernel/dma. In fact more of dma-direct.h
should eventually move, but that will require more coordination with
other subsystems.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Most of dma-debug.h is not required by anything outside of kernel/dma.
Move the four declarations needed by dma-mappin.h or dma-ops providers
into dma-mapping.h and dma-map-ops.h, and move the remainder of the
file to kernel/dma/debug.h.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Merge dma-contiguous.h into dma-map-ops.h, after removing the comment
describing the contiguous allocator into kernel/dma/contigous.c.
Signed-off-by: Christoph Hellwig <hch@lst.de>
dma_contiguous_set_default contains a trivial assignment, and has a
single caller that is compiled if CONFIG_CMA_DMA is enabled.
Signed-off-by: Christoph Hellwig <hch@lst.de>
dev_set_cma_area contains a trivial assignment. It has just three
callers that all have a non-NULL device and depend on CONFIG_DMA_CMA,
so remove the wrapper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Split out all the bits that are purely for dma_map_ops implementations
and related code into a new <linux/dma-map-ops.h> header so that they
don't get pulled into all the drivers. That also means the architecture
specific <asm/dma-mapping.h> is not pulled in by <linux/dma-mapping.h>
any more, which leads to a missing includes that were pulled in by the
x86 or arm versions in a few not overly portable drivers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
On an embedded system with a tiny (1 MiB) CMA area for video memory, and
a simple enough video pipeline, we can decrease the CMA_ALIGNMENT by a
factor of 2 to avoid wasting memory, as all the allocations for video
buffers will be of the exact same size (dictated by the size of the
screen).
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This API is the equivalent of alloc_pages, except that the returned memory
is guaranteed to be DMA addressable by the passed in device. The
implementation will also be used to provide a more sensible replacement
for DMA_ATTR_NON_CONSISTENT flag.
Additionally dma_alloc_noncoherent is switched over to use dma_alloc_pages
as its backend.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> (MIPS part)
All users are gone now, remove the API.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> (MIPS part)
Christoph Hellwig
Linus Torvalds
Martin Radev
Barry Song
Ashish Kalra
tangjianqiang
Tiezhu Yang
Alexey Kardashevskiy
Jason Gunthorpe
Stefano Stabellini
Randy Dunlap
Mike Rapoport
Paul Cercueil