There are a few places that call round{up|down}_pow_of_two() with the
value zero, and this causes undefined behavior warnings. Avoid
calling those macros if such a nonsense value is passed; it's a minor
optimization as well, as we handle it as either an error or a value to
be skipped, instead.
Reported-by: syzbot+33ef0b6639a8d2d42b4c@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201218161730.26596-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The PCM hw_params core function tries to clear up the PCM buffer
before actually using for avoiding the information leak from the
previous usages or the usage before a new allocation. It performs the
memset() with runtime->dma_bytes, but this might still leave some
remaining bytes untouched; namely, the PCM buffer size is aligned in
page size for mmap, hence runtime->dma_bytes doesn't necessarily cover
all PCM buffer pages, and the remaining bytes are exposed via mmap.
This patch changes the memory clearance to cover the all buffer pages
if the stream is supposed to be mmap-ready (that guarantees that the
buffer size is aligned in page size).
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20201218145625.2045-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently the standard memory allocator (snd_dma_malloc_pages*())
passes the byte size to allocate as is. Most of the backends
allocates real pages, hence the actual allocations are aligned in page
size. However, the genalloc doesn't seem assuring the size alignment,
hence it may result in the access outside the buffer when the whole
memory pages are exposed via mmap.
For avoiding such inconsistencies, this patch makes the allocation
size always to be aligned in page size.
Note that, after this change, snd_dma_buffer.bytes field contains the
aligned size, not the originally requested size. This value is also
used for releasing the pages in return.
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20201218145625.2045-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some buggy firmware don't give the current sample rate but leaves
zero. Handle this case more gracefully without warning but just skip
the current rate verification from the next time.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201218145858.2357-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since commit d4cfb30fce ("ALSA: pcm: Set per-card upper limit of PCM
buffer allocations") snd_pcm_lib_preallocate_dma_free() is a single line
function that has one caller, which is another single line function.
Clean this up a bit and remove snd_pcm_lib_preallocate_dma_free() and
directly call do_free_pages() from snd_pcm_lib_preallocate_free(). This is
a bit less boilerplate.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20201218153400.18394-1-lars@metafoo.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- Switch to the generic C VDSO, as well as some cleanups of our VDSO
setup/handling code.
- Support for KUAP (Kernel User Access Prevention) on systems using the hashed
page table MMU, using memory protection keys.
- Better handling of PowerVM SMT8 systems where all threads of a core do not
share an L2, allowing the scheduler to make better scheduling decisions.
- Further improvements to our machine check handling.
- Show registers when unwinding interrupt frames during stack traces.
- Improvements to our pseries (PowerVM) partition migration code.
- Several series from Christophe refactoring and cleaning up various parts of
the 32-bit code.
- Other smaller features, fixes & cleanups.
Thanks to:
Alan Modra, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Ard
Biesheuvel, Athira Rajeev, Balamuruhan S, Bill Wendling, Cédric Le Goater,
Christophe Leroy, Christophe Lombard, Colin Ian King, Daniel Axtens, David
Hildenbrand, Frederic Barrat, Ganesh Goudar, Gautham R. Shenoy, Geert
Uytterhoeven, Giuseppe Sacco, Greg Kurz, Harish, Jan Kratochvil, Jordan
Niethe, Kaixu Xia, Laurent Dufour, Leonardo Bras, Madhavan Srinivasan, Mahesh
Salgaonkar, Mathieu Desnoyers, Nathan Lynch, Nicholas Piggin, Oleg Nesterov,
Oliver O'Halloran, Oscar Salvador, Po-Hsu Lin, Qian Cai, Qinglang Miao, Randy
Dunlap, Ravi Bangoria, Sachin Sant, Sandipan Das, Sebastian Andrzej Siewior ,
Segher Boessenkool, Srikar Dronamraju, Tyrel Datwyler, Uwe Kleine-König,
Vincent Stehlé, Youling Tang, Zhang Xiaoxu.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAl/bURITHG1wZUBlbGxl
cm1hbi5pZC5hdQAKCRBR6+o8yOGlgEzBEAC1Vwibcog2P9rkJPb0q3UGWSYSx25V
h/LwwxtM9Tm14j/LZsSgkOgIsfMaWEBIw/8D4efQ7AX9aFo+R0c2DdQMx1MG5MXz
gZk58+l3LwId6h9+OrwurpEW+ZmURLAtGMSyFdkeiZ3/XTnkbf1XnewC0QWQe56a
EGLmjx1MFl45jspoy7UIUXsXoNJIfflEKhrgUzSUh8X2eLmvB9ws6A4BXxbVzyZl
lZv3+uWimU2pFgdkB9jOCxoG4zFEr2o5ovLHG7zCCVo5JoXmTPQ5cMVBraH206ms
+5vCmu4qI8uP5UlZW/mZfhrtDiMdHdQqqFOaQwVlOmoUbU6L6E6rxm3iVnov2Bbi
iUgxoeJDxAb2cM2EWFK6oWVgr7+NkwvXM1IG8xtprhHrCdnC9r+psQr/dswb3LSg
MJ7u/RCq3uixy2kWP8E0NEHw7ngQZ/ZKPqzfnmIWOC7tYUxgaL02I8Ff9/ZXAI2J
CnmqFYOjrimHkcwXGOtKkXNvfU0DiL97qpK2AQNWElE8+bUUmpw+ltUrsdSycYmv
Afc4WIcVrTA+a9laSLgjdZbolbNSa3p+cMIYdPrVx9g+xqygbxIKv+EDGNv1WHfD
GU1gmohMY+ZkMOvFRMi8LAsEm0DH/etWE0py/8uyxDYKnGyD1Ur6452DStkmgGb2
azmcaOyLdb+HXA==
=Ga3K
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Switch to the generic C VDSO, as well as some cleanups of our VDSO
setup/handling code.
- Support for KUAP (Kernel User Access Prevention) on systems using the
hashed page table MMU, using memory protection keys.
- Better handling of PowerVM SMT8 systems where all threads of a core
do not share an L2, allowing the scheduler to make better scheduling
decisions.
- Further improvements to our machine check handling.
- Show registers when unwinding interrupt frames during stack traces.
- Improvements to our pseries (PowerVM) partition migration code.
- Several series from Christophe refactoring and cleaning up various
parts of the 32-bit code.
- Other smaller features, fixes & cleanups.
Thanks to: Alan Modra, Alexey Kardashevskiy, Andrew Donnellan, Aneesh
Kumar K.V, Ard Biesheuvel, Athira Rajeev, Balamuruhan S, Bill Wendling,
Cédric Le Goater, Christophe Leroy, Christophe Lombard, Colin Ian King,
Daniel Axtens, David Hildenbrand, Frederic Barrat, Ganesh Goudar,
Gautham R. Shenoy, Geert Uytterhoeven, Giuseppe Sacco, Greg Kurz,
Harish, Jan Kratochvil, Jordan Niethe, Kaixu Xia, Laurent Dufour,
Leonardo Bras, Madhavan Srinivasan, Mahesh Salgaonkar, Mathieu
Desnoyers, Nathan Lynch, Nicholas Piggin, Oleg Nesterov, Oliver
O'Halloran, Oscar Salvador, Po-Hsu Lin, Qian Cai, Qinglang Miao, Randy
Dunlap, Ravi Bangoria, Sachin Sant, Sandipan Das, Sebastian Andrzej
Siewior , Segher Boessenkool, Srikar Dronamraju, Tyrel Datwyler, Uwe
Kleine-König, Vincent Stehlé, Youling Tang, and Zhang Xiaoxu.
* tag 'powerpc-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (304 commits)
powerpc/32s: Fix cleanup_cpu_mmu_context() compile bug
powerpc: Add config fragment for disabling -Werror
powerpc/configs: Add ppc64le_allnoconfig target
powerpc/powernv: Rate limit opal-elog read failure message
powerpc/pseries/memhotplug: Quieten some DLPAR operations
powerpc/ps3: use dma_mapping_error()
powerpc: force inlining of csum_partial() to avoid multiple csum_partial() with GCC10
powerpc/perf: Fix Threshold Event Counter Multiplier width for P10
powerpc/mm: Fix hugetlb_free_pmd_range() and hugetlb_free_pud_range()
KVM: PPC: Book3S HV: Fix mask size for emulated msgsndp
KVM: PPC: fix comparison to bool warning
KVM: PPC: Book3S: Assign boolean values to a bool variable
powerpc: Inline setup_kup()
powerpc/64s: Mark the kuap/kuep functions non __init
KVM: PPC: Book3S HV: XIVE: Add a comment regarding VP numbering
powerpc/xive: Improve error reporting of OPAL calls
powerpc/xive: Simplify xive_do_source_eoi()
powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_EOI_FW
powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_MASK_FW
powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_SHIFT_BUG
...
When the axg-tdm-interface was introduced, the backend DAI was marked as an
endpoint when DPCM was walking the DAPM graph to find a its BE.
It is no longer the case since this
commit 8dd26dff00 ("ASoC: dapm: Fix handling of custom_stop_condition on DAPM graph walks")
Because of this, when DPCM finds a BE it does everything it needs on the
DAIs but it won't power up the widgets between the FE and the BE if there
is no actual endpoint after the BE.
On meson-axg HWs, the loopback is a special DAI of the tdm-interface BE.
It is only linked to the dummy codec since there no actual HW after it.
>From the DAPM perspective, the DAI has no endpoint. Because of this, the TDM
decoder, which is a widget between the FE and BE is not powered up.
>From the user perspective, everything seems fine but no data is produced.
Connecting the Loopback DAI to a dummy DAPM endpoint solves the problem.
Fixes: 8dd26dff00 ("ASoC: dapm: Fix handling of custom_stop_condition on DAPM graph walks")
Cc: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20201217150812.3247405-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The signal captured on from tdm decoder of the AXG SoC is incorrect. It
appears amplified. The skew offset of the decoder is wrong.
Setting the skew offset to 3, like the g12 and sm1 SoCs, solves and gives
correct data.
Fixes: 13a22e6a98 ("ASoC: meson: add tdm input driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20201217150834.3247526-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch set is to add support for playback recover after hard suspend and resume.
It includes:
1. Reverting part of previous commit, which is for handling registers invalid state
after hard suspend.
2. Adding pm ops in component driver and do regcache sync.
Changes Since v1 and v2:
-- Subject lines changed
Changes Since v3:
-- Patch is splitted into 2 patches
Changes Since v4:
-- Subject lines changed
Changes Since v5:
-- Removed redundant initialization of map variable in lpass-platform.c
Srinivasa Rao Mandadapu (2):
ASoC: qcom: Fix incorrect volatile registers
ASoC: qcom: Add support for playback recover after resume
sound/soc/qcom/lpass-cpu.c | 20 ++---------------
sound/soc/qcom/lpass-platform.c | 50 ++++++++++++++++++++++++++++-------------
2 files changed, 37 insertions(+), 33 deletions(-)
--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
We will set regcache_cache_only true in suspend. As a result,
regmap_read will return error when we try to read volatile
registers in suspend. Besides, it doesn't make sense to read
feedback data when codec is not active. To make userspace
happy, this patch returns a cached value shich should be a
valid value.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20201217074556.32370-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
haswell machine board is missing pm_ops what prevents it from undergoing
suspend-resume procedure successfully. Assign default snd_soc_pm_ops so
this is no longer the case.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20201217105401.27865-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To support playback continuation after hard suspend(bypass powerd)
and resume do regcache sync with component driver pm ops.
Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org>
Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Link: https://lore.kernel.org/r/1608192514-29695-3-git-send-email-srivasam@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
MI2S and DMA control registers are not volatile, so remove these from volatile registers list.
Registers reset state check by reading non volatile registers makes no use,
so remove error check from cpu and platform trigger callbacks.
Initialized map variable two times in lpass platform trigger API,
so remove redundant initialization.
Fixes commit b182496822 ("ASoC: qcom: Fix enabling BCLK and LRCLK in LPAIF invalid state")
Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org>
Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Link: https://lore.kernel.org/r/1608192514-29695-2-git-send-email-srivasam@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Since mmap for userspace is based on page alignment, add page alignment
for iram alloc from pool, otherwise, some good data located in the same
page of dmab->area maybe touched wrongly by userspace like pulseaudio.
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1608221747-3474-1-git-send-email-yibin.gong@nxp.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This platform only supported iphone type headset.
It can't support Dell headset mode.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/b97e971978034bc9b772a08ec91265e8@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acer TravelMate laptops P648/P658 series with codec ALC282 only have
one physical jack for headset but there's a confusing lineout pin on
NID 0x1b reported. Audio applications hence misunderstand that there
are a speaker and a lineout, and take the lineout as the default audio
output.
Add a new quirk to remove the useless lineout and enable the pin 0x18
for jack sensing and headset microphone.
Signed-off-by: Chris Chiu <chiu@endlessos.org>
Signed-off-by: Jian-Hong Pan <jhp@endlessos.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201216125200.27053-1-chiu@endlessos.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There are a couple of spelling mistakes in the Kconfig help text. Fix them.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20201216112608.11385-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When condition ((hdmi_out && hdmi_in) || (!hdmi_out && !hdmi_in))
is true, then goto fail, the uninitialized variable ret will be
returned.
Signed-off-by: shengjiu wang <shengjiu.wang@nxp.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Fixes: 6a5f850aa8 ("ASoC: fsl: Add imx-hdmi machine driver")
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/1608115464-18710-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a spelling mistake in the Kconfig help text. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201216125913.16041-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
- Update ACPICA code in the kernel to upstream revision 20201113
with changes as follows:
* Add 5 new UUIDs to the known UUID table (Bob Moore).
* Remove extreaneous "the" in comments (Colin Ian King).
* Add function trace macros to improve debugging (Erik Kaneda).
* Fix interpreter memory leak (Erik Kaneda).
* Handle "orphan" _REG for GPIO OpRegions (Hans de Goede).
- Introduce resource_union() and resource_intersection() helpers
and clean up some resource-manipulation code with the help of
them (Andy Shevchenko).
- Revert problematic commit related to the handling of resources
in the ACPI core (Daniel Scally).
- Extend the ACPI device enumeration documentation and the
gpio-line-names _DSD property documentation, clean up the
latter (Flavio Suligoi).
- Clean up _DEP handling during device enumeration, modify the list
of _DEP exceptions and the handling of it and fix up terminology
related to _DEP (Hans de Goede, Rafael Wysocki).
- Eliminate in_interrupt() usage from the ACPI EC driver (Sebastian
Andrzej Siewior).
- Clean up the advance_transaction() routine and related code in
the ACPI EC driver (Rafael Wysocki).
- Add new backlight quirk for GIGABYTE GB-BXBT-2807 (Jasper
St. Pierre).
- Make assorted janitorial changes in several ACPI-related pieces
of code (Hanjun Guo, Jason Yan, Punit Agrawal).
-----BEGIN PGP SIGNATURE-----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=5LZe
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to upstream revision
20201113, fix and clean up some resources manipulation code, extend
the enumeration and gpio-line-names property documentation, clean up
the handling of _DEP during device enumeration, add a new backlight
DMI quirk, clean up transaction handling in the EC driver and make
some assorted janitorial changes.
Specifics:
- Update ACPICA code in the kernel to upstream revision 20201113 with
changes as follows:
* Add 5 new UUIDs to the known UUID table (Bob Moore)
* Remove extreaneous "the" in comments (Colin Ian King)
* Add function trace macros to improve debugging (Erik Kaneda)
* Fix interpreter memory leak (Erik Kaneda)
* Handle "orphan" _REG for GPIO OpRegions (Hans de Goede)
- Introduce resource_union() and resource_intersection() helpers and
clean up some resource-manipulation code with the help of them
(Andy Shevchenko)
- Revert problematic commit related to the handling of resources in
the ACPI core (Daniel Scally)
- Extend the ACPI device enumeration documentation and the
gpio-line-names _DSD property documentation, clean up the latter
(Flavio Suligoi)
- Clean up _DEP handling during device enumeration, modify the list
of _DEP exceptions and the handling of it and fix up terminology
related to _DEP (Hans de Goede, Rafael Wysocki)
- Eliminate in_interrupt() usage from the ACPI EC driver (Sebastian
Andrzej Siewior)
- Clean up the advance_transaction() routine and related code in the
ACPI EC driver (Rafael Wysocki)
- Add new backlight quirk for GIGABYTE GB-BXBT-2807 (Jasper St
Pierre)
- Make assorted janitorial changes in several ACPI-related pieces of
code (Hanjun Guo, Jason Yan, Punit Agrawal)"
* tag 'acpi-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (40 commits)
ACPI: scan: Fix up _DEP-related terminology with supplier/consumer
ACPI: scan: Drop INT3396 from acpi_ignore_dep_ids[]
ACPI: video: Add DMI quirk for GIGABYTE GB-BXBT-2807
Revert "ACPI / resources: Use AE_CTRL_TERMINATE to terminate resources walks"
ACPI: scan: Add PNP0D80 to the _DEP exceptions list
ACPI: scan: Call acpi_get_object_info() from acpi_add_single_object()
ACPI: scan: Add acpi_info_matches_hids() helper
ACPICA: Update version to 20201113
ACPICA: Interpreter: fix memory leak by using existing buffer
ACPICA: Add function trace macros to improve debugging
ACPICA: Also handle "orphan" _REG methods for GPIO OpRegions
ACPICA: Remove extreaneous "the" in comments
ACPICA: Add 5 new UUIDs to the known UUID table
resource: provide meaningful MODULE_LICENSE() in test suite
ASoC: Intel: catpt: Replace open coded variant of resource_intersection()
ACPI: processor: Drop duplicate setting of shared_cpu_map
ACPI: EC: Clean up status flags checks in advance_transaction()
ACPI: EC: Untangle error handling in advance_transaction()
ACPI: EC: Simplify error handling in advance_transaction()
ACPI: EC: Rename acpi_ec_is_gpe_raised()
...
This is quite a busy release for regmap with two substantial features
being added:
- Support for register maps Soundwire 1.2 multi-byte operations,
allowing atomic support for registers larger than a single byte.
- Support for relaxed I/O without barriers in MMIO regmaps, allowing
them to be used efficiently on systems where default MMIO operations
include barriers.
There was also an addition and revert of use of the new Soundwire
support for RT715 due to build issues with the driver built in, my tests
only covered building it as a module, the patch wasn't just dropped as
it had already been merged elsewhere.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl/XdOYACgkQJNaLcl1U
h9DKWwf7BVgrH1vcgOdZ/8xbVnu2pmNGJzHydfV2XD2fHuEgkuVN1dv756HFCzBj
XpHGa+XRGt1j39KsBqhcBOGuCLiTmjmoxWXq4MnBFVHcXBNRk1z6YFtkeZBkRi0j
ZxZNlrrCCaFp8KmqyqMeIU9DbiQ/ITTH/1VBcffnprYI1J9gK4JQE0iisaMIap90
XwKx4VUwT63yVZQGJPW4t65uMUbPTRqcZQzfj3DGhjmkhNI/EvpPU44K11I+op/6
7J9enekMlbOR5t7606h9gAapW1Qt+YrvTwciT9mzGNsmO8MmyUIRQUYuZAzp5RIT
BH5aIRfTUb6lYuktSKI8STrbOUdi/A==
=194Y
-----END PGP SIGNATURE-----
Merge tag 'regmap-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"This is quite a busy release for regmap with two substantial features
being added:
- Support for register maps Soundwire 1.2 multi-byte operations,
allowing atomic support for registers larger than a single byte.
- Support for relaxed I/O without barriers in MMIO regmaps, allowing
them to be used efficiently on systems where default MMIO
operations include barriers.
There was also an addition and revert of use of the new Soundwire
support for RT715 due to build issues with the driver built in, my
tests only covered building it as a module, the patch wasn't just
dropped as it had already been merged elsewhere"
* tag 'regmap-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
ASoC: rt715: Fix build
regmap: sdw: add required header files
regmap: Remove duplicate `type` field from regmap `regcache_sync` trace event
regmap: Fix order of regmap write log
regmap: mmio: add config option to allow relaxed MMIO accesses
Here is the big staging and IIO driver pull request for 5.11-rc1
Lots of different things in here:
- loads of driver updates
- so many coding style cleanups
- new IIO drivers
- Android ION code is finally removed from the tree
- wimax drivers are moved to staging on their way out of the kernel
Nothing really exciting, just the constant grind of kernel development :)
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX9iCdw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn44QCguVCsIkhxYmnuTAkrPQP74CbJoJwAoLVoPM5K
LJRbMYjGfRc4gZehlrIV
=clR4
-----END PGP SIGNATURE-----
Merge tag 'staging-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging / IIO driver updates from Greg KH:
"Here is the big staging and IIO driver pull request for 5.11-rc1
Lots of different things in here:
- loads of driver updates
- so many coding style cleanups
- new IIO drivers
- Android ION code is finally removed from the tree
- wimax drivers are moved to staging on their way out of the kernel
Nothing really exciting, just the constant grind of kernel development :)
All have been in linux-next for a while with no reported issues"
* tag 'staging-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (341 commits)
staging: olpc_dcon: Do not call platform_device_unregister() in dcon_probe()
staging: most: Fix spelling mistake "tranceiver" -> "transceiver"
staging: qlge: remove duplicate word in comment
staging: comedi: mf6x4: Fix AI end-of-conversion detection
staging: greybus: Add TODO item about modernizing the pwm code
pinctrl: ralink: add a pinctrl driver for the rt2880 family
dt-bindings: pinctrl: rt2880: add binding document
staging: rtl8723bs: remove ELEMENT_ID enum
staging: rtl8723bs: remove unused macros
staging: rtl8723bs: replace EID_EXTCapability
staging: rtl8723bs: replace EID_BSSIntolerantChlReport
staging: rtl8723bs: replace EID_BSSCoexistence
staging: rtl8723bs: replace _MME_IE_
staging: rtl8723bs: replace _WAPI_IE_
staging: rtl8723bs: replace _EXT_SUPPORTEDRATES_IE_
staging: rtl8723bs: replace _ERPINFO_IE_
staging: rtl8723bs: replace _CHLGETXT_IE_
staging: rtl8723bs: replace _COUNTRY_IE_
staging: rtl8723bs: replace _IBSS_PARA_IE_
staging: rtl8723bs: replace _TIM_IE_
...
Lots of changes (slightly more code increase than usual) at this
time, while most of code changes are ASoC driver-specific.
Here goes some highlight:
Core:
* The new auxiliary bus implementation for Intel DSP, which will
be used by other drivers as well
* Lots of ASoC core cleanups and refactoring
* UBSAN and KCSAN fixes in rawmidi, sequencer and a few others
* Compress-offload API enhancement for the pause during draining
HD- and USB-audio:
* Enhancements of the USB-audio implicit feedback support,
including better full-duplex operations
* Continued CA0132 improvements and fixes
* A few new quirk entries, HDMI audio fixes
ASoC:
* Support for boot time selection of Intel DSP firmware, which
should help distros/users testing new stuff more easily;
the kconfig was moved to boot time option, too
* Some basic DPCM support in audio graph card
* Removal of old pre-DT Freescale drivers
* Support for Allwinner H6 I2S, Analog Devices ADAU1372, Intel
Alderlake-S, GMediatek MT8192, NXP i.MX HDMI and XCVR, Realtek
RT715, Qualcomm SM8250 and simple GPIO based muxes
-----BEGIN PGP SIGNATURE-----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=j9El
-----END PGP SIGNATURE-----
Merge tag 'sound-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Lots of changes (slightly more code increase than usual) at this time,
while most of code changes are ASoC driver-specific.
Here are some highlights:
Core:
- The new auxiliary bus implementation for Intel DSP, which will be
used by other drivers as well
- Lots of ASoC core cleanups and refactoring
- UBSAN and KCSAN fixes in rawmidi, sequencer and a few others
- Compress-offload API enhancement for the pause during draining
HD- and USB-audio:
- Enhancements of the USB-audio implicit feedback support, including
better full-duplex operations
- Continued CA0132 improvements and fixes
- A few new quirk entries, HDMI audio fixes
ASoC:
- Support for boot time selection of Intel DSP firmware, which should
help distros/users testing new stuff more easily; the kconfig was
moved to boot time option, too
- Some basic DPCM support in audio graph card
- Removal of old pre-DT Freescale drivers
- Support for Allwinner H6 I2S, Analog Devices ADAU1372, Intel
Alderlake-S, GMediatek MT8192, NXP i.MX HDMI and XCVR, Realtek
RT715, Qualcomm SM8250 and simple GPIO based muxes"
* tag 'sound-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (445 commits)
ALSA: pcm: oss: Fix potential out-of-bounds shift
ALSA: usb-audio: Fix potential out-of-bounds shift
ALSA: hda/ca0132 - Add ZxR surround DAC setup.
ALSA: hda/ca0132 - Add 8051 PLL write helper functions.
ALSA: hda/hdmi: packet buffer index must be set before reading value
ASoC: SOF: imx: update kernel-doc description
ASoC: mediatek: mt8183: delete some unreachable code
ASoC: mediatek: mt8183: add PM ops to machine drivers
ASoC: topology: Fix wrong size check
ASoC: topology: Add missing size check
ASoC: SOF: Intel: hda: fix the condition passed to sof_dev_dbg_or_err
ASoC: SOF: modify the SOF_DBG flags
ASoC: SOF: Intel: hda: remove duplicated status dump
ASoC: rt1015p: delay 300ms after SDB pulling high for calibration
ASoC: rt1015p: move SDB control from trigger to DAPM
ASoC: wm_adsp: remove "ctl" from list on error in wm_adsp_create_control()
ALSA: usb-audio: Fix control 'access overflow' errors from chmap
ALSA: hda/hdmi: always print pin NIDs as hexadecimal
ALSA: hda/realtek - Add supported for more Lenovo ALC285 Headset Button
ALSA: hda/ca0132 - Remove now unnecessary DSP setup functions.
...
Merge misc updates from Andrew Morton:
- a few random little subsystems
- almost all of the MM patches which are staged ahead of linux-next
material. I'll trickle to post-linux-next work in as the dependents
get merged up.
Subsystems affected by this patch series: kthread, kbuild, ide, ntfs,
ocfs2, arch, and mm (slab-generic, slab, slub, dax, debug, pagecache,
gup, swap, shmem, memcg, pagemap, mremap, hmm, vmalloc, documentation,
kasan, pagealloc, memory-failure, hugetlb, vmscan, z3fold, compaction,
oom-kill, migration, cma, page-poison, userfaultfd, zswap, zsmalloc,
uaccess, zram, and cleanups).
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (200 commits)
mm: cleanup kstrto*() usage
mm: fix fall-through warnings for Clang
mm: slub: convert sysfs sprintf family to sysfs_emit/sysfs_emit_at
mm: shmem: convert shmem_enabled_show to use sysfs_emit_at
mm:backing-dev: use sysfs_emit in macro defining functions
mm: huge_memory: convert remaining use of sprintf to sysfs_emit and neatening
mm: use sysfs_emit for struct kobject * uses
mm: fix kernel-doc markups
zram: break the strict dependency from lzo
zram: add stat to gather incompressible pages since zram set up
zram: support page writeback
mm/process_vm_access: remove redundant initialization of iov_r
mm/zsmalloc.c: rework the list_add code in insert_zspage()
mm/zswap: move to use crypto_acomp API for hardware acceleration
mm/zswap: fix passing zero to 'PTR_ERR' warning
mm/zswap: make struct kernel_param_ops definitions const
userfaultfd/selftests: hint the test runner on required privilege
userfaultfd/selftests: fix retval check for userfaultfd_open()
userfaultfd/selftests: always dump something in modes
userfaultfd: selftests: make __{s,u}64 format specifiers portable
...
* acpi-resources:
Revert "ACPI / resources: Use AE_CTRL_TERMINATE to terminate resources walks"
resource: provide meaningful MODULE_LICENSE() in test suite
ASoC: Intel: catpt: Replace open coded variant of resource_intersection()
ACPI: watchdog: Replace open coded variant of resource_union()
PCI/ACPI: Replace open coded variant of resource_union()
resource: Add test cases for new resource API
resource: Introduce resource_intersection() for overlapping resources
resource: Introduce resource_union() for overlapping resources
resource: Group resource_overlaps() with other inline helpers
resource: Simplify region_intersects() by reducing conditionals
* acpi-docs:
Documentation: ACPI: enumeration: add PCI hierarchy representation
Documentation: ACPI: _DSD: enable hyperlink in final references
Documentation: ACPI: explain how to use gpio-line-names
A widget's "dirty" list_head, much like its "list" list_head, eventually
chains back to a list_head on the snd_soc_card itself. This means that
the list can stick around even after the widget (or all widgets) have
been freed. Currently, however, widgets that are in the dirty list when
freed remain there, corrupting the entire list and leading to memory
errors and undefined behavior when the list is next accessed or
modified.
I encountered this issue when a component failed to probe relatively
late in snd_soc_bind_card(), causing it to bail out and call
soc_cleanup_card_resources(), which eventually called
snd_soc_dapm_free() with widgets that were still dirty from when they'd
been added.
Fixes: db432b414e ("ASoC: Do DAPM power checks only for widgets changed since last run")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/f8b5f031d50122bf1a9bfc9cae046badf4a7a31a.1607822410.git.tommyhebb@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull crypto updates from Herbert Xu:
"API:
- Add speed testing on 1420-byte blocks for networking
Algorithms:
- Improve performance of chacha on ARM for network packets
- Improve performance of aegis128 on ARM for network packets
Drivers:
- Add support for Keem Bay OCS AES/SM4
- Add support for QAT 4xxx devices
- Enable crypto-engine retry mechanism in caam
- Enable support for crypto engine on sdm845 in qce
- Add HiSilicon PRNG driver support"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (161 commits)
crypto: qat - add capability detection logic in qat_4xxx
crypto: qat - add AES-XTS support for QAT GEN4 devices
crypto: qat - add AES-CTR support for QAT GEN4 devices
crypto: atmel-i2c - select CONFIG_BITREVERSE
crypto: hisilicon/trng - replace atomic_add_return()
crypto: keembay - Add support for Keem Bay OCS AES/SM4
dt-bindings: Add Keem Bay OCS AES bindings
crypto: aegis128 - avoid spurious references crypto_aegis128_update_simd
crypto: seed - remove trailing semicolon in macro definition
crypto: x86/poly1305 - Use TEST %reg,%reg instead of CMP $0,%reg
crypto: x86/sha512 - Use TEST %reg,%reg instead of CMP $0,%reg
crypto: aesni - Use TEST %reg,%reg instead of CMP $0,%reg
crypto: cpt - Fix sparse warnings in cptpf
hwrng: ks-sa - Add dependency on IOMEM and OF
crypto: lib/blake2s - Move selftest prototype into header file
crypto: arm/aes-ce - work around Cortex-A57/A72 silion errata
crypto: ecdh - avoid unaligned accesses in ecdh_set_secret()
crypto: ccree - rework cache parameters handling
crypto: cavium - Use dma_set_mask_and_coherent to simplify code
crypto: marvell/octeontx - Use dma_set_mask_and_coherent to simplify code
...
Return -ETIMEDOUT if the dsp boot times out instead of returning
success.
Fixes: cb6a552846 ("ASoC: Intel: cnl: Add sst library functions for cnl platform")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/X9NEvCzuN+IObnTN@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
There's a lot of changes here but mostly cleanups and driver specific
things, the most user visible change is the support for boot time
selection of Intel DSP firmware which will make it easier for people to
move over to the preferred modern implementations in distros and other
large scale deployments.
This also includes a merge of the new auxillary bus which was done in
anticipation of use by the Intel DSP drivers which didn't quite make it.
- Lots more cleanups and simplifications from Morimoto-san.
- Support for some basic DPCM systems in the audio graph card from
Sameer Pujar.
- Remove some old pre-DT Freescale drivers for platforms that are now
DT only.
- Move selection of which Intel DSP implementation to use to boot time
rather than requiring it to be selected at build time.
- Support for Allwinner H6 I2S, Analog Devices ADAU1372, Intel
Alderlake-S, GMediatek MT8192, NXP i.MX HDMI and XCVR, Realtek RT715,
Qualcomm SM8250 and simple GPIO based muxes.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl/XcxYACgkQJNaLcl1U
h9ApEgf/ZkKxj1Nq6RCfUqhyGK2u1ktzCpnugvjHebutXV1LD0y+y0/CnjdN5Vou
8r+BsX6izfEx6JuZyu1ryQcz+Rsp6VH6uK9e/vRPExIkkAw+JQzEGVzQRyrnREoA
eV8BO92YKrRtJM1HoIBnQOhoWMc/4Kqi7hklaiXDhHRDGpLcbTyeVK8ROarORLcy
aupt7WinLvbhP++xjs9YR/RffjpwxyxOkmkIaM9TpkKqADays+sBDCZXSVgFjQik
1rFLQ8jYAb/EOPNdCXrMEILrSaNMCz719vh2gZkm1yYQ3Tp5dH9WGqLROq9Oy/D4
FaCGJoxX0HUe7MWbJeI97PFZB8i2gQ==
=iCuN
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.11' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.11
There's a lot of changes here but mostly cleanups and driver specific
things, the most user visible change is the support for boot time
selection of Intel DSP firmware which will make it easier for people to
move over to the preferred modern implementations in distros and other
large scale deployments.
This also includes a merge of the new auxillary bus which was done in
anticipation of use by the Intel DSP drivers which didn't quite make it.
- Lots more cleanups and simplifications from Morimoto-san.
- Support for some basic DPCM systems in the audio graph card from
Sameer Pujar.
- Remove some old pre-DT Freescale drivers for platforms that are now
DT only.
- Move selection of which Intel DSP implementation to use to boot time
rather than requiring it to be selected at build time.
- Support for Allwinner H6 I2S, Analog Devices ADAU1372, Intel
Alderlake-S, GMediatek MT8192, NXP i.MX HDMI and XCVR, Realtek RT715,
Qualcomm SM8250 and simple GPIO based muxes.
syzbot spotted a potential out-of-bounds shift in the PCM OSS layer
where it calculates the buffer size with the arbitrary shift value
given via an ioctl.
Add a range check for avoiding the undefined behavior.
As the value can be treated by a signed integer, the max shift should
be 30.
Reported-by: syzbot+df7dc146ebdd6435eea3@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201209084552.17109-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add pre-dsp download initialization for the DAC's used in the surround
sound configuration. Fixes issues of no audio on surround channels.
Fixes: 2e492b8ee5 ("ALSA: hda/ca0132 - Add ZxR init commands")
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Link: https://lore.kernel.org/r/20201211225504.4508-2-conmanx360@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Small series that addresses a problem where DSP status dump
for a failure case, ends up being printed as as debug print. This
is important information for any bug report. While at it, the series
contains a few cleanups to related code.
Ranjani Sridharan (3):
ASoC: SOF: Intel: hda: remove duplicated status dump
ASoC: SOF: modify the SOF_DBG flags
ASoC: SOF: Intel: hda: fix the condition passed to sof_dev_dbg_or_err
sound/soc/sof/debug.c | 2 +-
sound/soc/sof/intel/byt.c | 2 +-
sound/soc/sof/intel/hda-loader.c | 19 +++++++++++++------
sound/soc/sof/intel/hda.c | 10 ++++------
sound/soc/sof/loader.c | 4 ++--
sound/soc/sof/ops.c | 2 +-
sound/soc/sof/sof-priv.h | 13 ++++++++-----
7 files changed, 30 insertions(+), 22 deletions(-)
--
2.29.2
The check for infoframe transmit status in hdmi_infoframe_uptodate()
makes the assumption that packet buffer index is set to zero.
Align code with specification and explicitly set the index before
AC_VERB_GET_HDMI_DIP_XMIT. The packet index setting affects both
DIP-Data and DIP-XmitCtrl verbs.
There are no known cases where the old implementation has caused driver
to work incorrectly. This change is purely based on code review against
the specification (HDA spec rev1.0a).
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201211131613.3271407-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This has a goto followed by an unreachable return statement. The goto
is correct because it cleans up so the current runtime behavior is fine.
Let's delete the unreachable return statement.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/X9NFg3KVm16Gx6Io@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
Dan reported that smatch reports wrong size check and after analysis it
is confirmed that we are comparing wrong value: pointer size instead of
array size. However the check itself is problematic as in UAPI header
there are two fields:
struct snd_soc_tplg_enum_control {
(...)
char texts[SND_SOC_TPLG_NUM_TEXTS][SNDRV_CTL_ELEM_ID_NAME_MAXLEN];
__le32 values[SND_SOC_TPLG_NUM_TEXTS * SNDRV_CTL_ELEM_ID_NAME_MAXLEN / 4];
the texts field is for names and the values one for values assigned to
those named fields, after analysis it becomes clear that there is quite
a lot overhead values than we may possibly name. So instead of changing
check to ARRAY_SIZE(ec->values), as it was first suggested, use
hardcoded value of SND_SOC_TPLG_NUM_TEXTS.
Link: https://lore.kernel.org/alsa-devel/X9B0eDcKy+9B6kZl@mwanda/
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20201210152541.191728-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When we parse "values" we perform check if there is correct number of
them. However similar check is missing in case of "texts", add it.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20201210152541.191728-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The condition boot_iteration == HDA_FW_BOOT_ATTEMPTS to determine
the log level for the DSP status dump would only work in the case of DSP
init failure after maximum number of attempts to initialize the DSP. If
DSP init succeeds in less than HDA_FW_BOOT_ATTEMPTS attempts and FW
loading fails, the ROM status dump would end up getting logged as debug
instead of an error.
So, add a new flag, SOF_DBG_DUMP_LOG_ERROR, to explicitly specify
the log level for DSP status dump.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201211100743.3188821-4-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SOF_DBG_* macros are used for dual purposes right now, for the
sof_core_debug module parameter and for the dbg_dump() ops. So, separate
these two types of flags into different types to avoid confusion.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201211100743.3188821-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove the duplicate status dump in case DSP init fails. The core will
be powered down in this case and the status dump will be invalid anyway.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201211100743.3188821-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
RT1015p needs 300ms delay after SDB pulling high for internal
calibration during the power on sequence.
Delays 300ms right before data sends out to avoid data truncated.
Assuming the calibration state gets lost after system suspend.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20201211051224.2307349-3-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Moves SDB control from DAI ops trigger to DAPM. As long as BCLK
and LRCLK are ready, SDB can be toggled earlier.
Changes from using gpiod_set_value() to gpiod_set_value_cansleep()
because it executes in non-atomic context.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20201211051224.2307349-2-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The error handling frees "ctl" but it's still on the "dsp->ctl_list"
list so that could result in a use after free. Remove it from the list
before returning.
Fixes: 2323736dca ("ASoC: wm_adsp: Add basic support for rev 1 firmware file format")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/X9B0keV/02wrx9Xs@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
The current channel-map control implementation in USB-audio driver may
lead to an error message like
"control 3:0:0:Playback Channel Map:0: access overflow"
when CONFIG_SND_CTL_VALIDATION is set. It's because the chmap get
callback clears the whole array no matter which count is set, and
rather the false-positive detection.
This patch fixes the problem by clearing only the needed array range
at usb_chmap_ctl_get().
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201211130048.6358-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The debug prints from patch_hdmi.c are not aligned with HDA common code
in hda_codec.c nor with other HDA codec drivers.
To align with rest of the codebase, use hexadecimal formatting whenever
printing value of a HDA NID. Also refer to NIDs with capital letters in
traces as is done other modules. This presentation is also aligned with
the formatting used in HDA codec procfs entry.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201211124547.3243871-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now that the DSP's audio configuration is understood, remove previous
hacky methods of trying to properly configure it.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Link: https://lore.kernel.org/r/20201210160658.461739-6-conmanx360@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make sure that the DSP has no DMA channels allocated once the firmware
is downloaded, and that the default audio streams in use by the DSP are
setup in the correct order.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Link: https://lore.kernel.org/r/20201210160658.461739-5-conmanx360@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add functions for both reading and writing to the 8051's exram. Also,
add a little bit of documentation on how the addresses are segmented.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Link: https://lore.kernel.org/r/20201210160658.461739-4-conmanx360@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reset the codec upon initialization to clear out anything that may have
been setup on a previous boot into Windows, or in case of an improper
shutdown.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Link: https://lore.kernel.org/r/20201210160658.461739-2-conmanx360@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A problem exists in enabling silent stream when connection type is
DisplayPort. Silent stream programming is completed when a new DP
receiver is connected, but infoframe transmission does not actually
start until PCM is opened for the first time. This can result in audible
gap of multiple seconds. This only affects the first PCM open.
Fix the issue by properly assigning a converter to the silent stream,
and modifying the required stream ID programming sequence.
This change only affects Intel display audio codecs.
BugLink: https://github.com/thesofproject/linux/issues/2468
Fixes: 951894cf30 ("ALSA: hda/hdmi: Add Intel silent stream support")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201210174445.3134104-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Steinberg UR22 (with USB ID 0499:1509) requires the implicit feedback
for the proper playback, otherwise it causes occasional cracks.
This patch adds the corresponding the quirk table entry with the
recently added generic implicit fb support.
Reported-and-tested-by: Kilian <meschi@posteo.de>
Link: https://lore.kernel.org/r/20201209161835.13625-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It seems that the HD-audio clear and reconfig sysfs don't work any
longer after the recent driver core change. There are multiple issues
around that: the linked list corruption and the dead device handling.
The former issue is fixed by another patch for the driver core itself,
while the latter patch needs to be addressed in HD-audio side.
This patch corresponds to the latter, it recovers those broken
functions by replacing the device detach and attach actions with the
standard core API functions, which are almost equivalent with unbind
and bind actions.
Fixes: 654888327e ("driver core: Avoid binding drivers to dead devices")
Cc: <stable@vger.kernel.org>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=209207
Link: https://lore.kernel.org/r/20201209150119.7705-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a driver for simple mux driven by gpios. It currently only supports one
gpio, muxing one of two inputs to a single output.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201205001508.346439-2-alexandre.belloni@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Expand SOF support for Alder Lake by adding ACPI machine tables
for ADL-S systems with SoundWire codecs. Modify kernel config
to choose SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE for these
platforms.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20201209153102.3028310-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Initial support for ADL w/ RT711
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20201209153102.3028310-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Users reported that some Lenovo AMD platforms do not have ACP microphone,
but the BIOS advertises it via ACPI.
This patch create a simple DMI table, where those machines with the broken
BIOS can be added. The DMI description for Lenovo IdeaPad 5 and
IdeaPad Flex 5 devices are added there.
Also describe the dmic_acpi_check kernel module parameter in a more
understandable way.
Cc: <stable@kernel.org>
Cc: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20201208171200.2737620-1-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
In some projects, the device ID register is not read correctly.
This patch helps to verify the issue is caused from i2c host or client.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20201209091308.2823-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cap-less mode is useful e.g. if the headphones are used as an antenna
for a FM radio, so that the signal is not altered. For everything else,
we want the cap-couple mode.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20201207125338.119397-5-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
When using cap-coupled outputs, the RUP/RDO can take much longer than
the 100ms timeout we used to have. Increase that timeout to one second.
Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20201207125338.119397-3-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
In case a poll for RUP times out, we might be left with some IRQ flags
that should be cleared before the next power on.
Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20201207125338.119397-2-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_pcm_trigger() calls DAI/Component/Link trigger,
but some of them might be failed.
static int soc_pcm_trigger(...)
{
...
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
ret = snd_soc_link_trigger(substream, cmd);
if (ret < 0)
break;
(*) ret = snd_soc_pcm_component_trigger(substream, cmd);
if (ret < 0)
break;
ret = snd_soc_pcm_dai_trigger(substream, cmd);
break;
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
ret = snd_soc_pcm_dai_trigger(substream, cmd);
if (ret < 0)
break;
ret = snd_soc_pcm_component_trigger(substream, cmd);
if (ret < 0)
break;
ret = snd_soc_link_trigger(substream, cmd);
break;
}
...
}
For example, if soc_pcm_trigger() failed at (*) point,
we need to rollback previous succeeded trigger.
This patch adds trigger mark for DAI/Component/Link,
and do STOP if START/RESUME/PAUSE_RELEASE were failed.
Because it need to use new rollback parameter,
we need to modify DAI/Component/Link trigger functions in the same time.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a6uycssd.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dpcm_be_dai_trigger() is calling dpcm_do_trigger()
at each SNDRV_PCM_TRIGGER_xxx (1).
int dpcm_be_dai_trigger(...)
{
for_each_dpcm_be(fe, stream, dpcm) {
(B) ...
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
...
(1) ret = dpcm_do_trigger(...);
...
case SNDRV_PCM_TRIGGER_RESUME:
...
(1) ret = dpcm_do_trigger(...);
...
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
...
(1) ret = dpcm_do_trigger(...);
...
case SNDRV_PCM_TRIGGER_STOP:
...
(1) ret = dpcm_do_trigger(...);
...
case SNDRV_PCM_TRIGGER_SUSPEND:
...
(1) ret = dpcm_do_trigger(...);
...
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
...
(1) ret = dpcm_do_trigger(...);
...
}
}
}
But it is just very verbose and duplicated function.
Because We can indicate dev_dbg() (A) at dpcm_be_dai_trigger() (B).
And dev_err() (C) is not needed because soc_pcm_trigger() itself
indicates error message when error.
static int dpcm_do_trigger(...)
{
int ret;
(A) dev_dbg(...);
ret = soc_pcm_trigger(substream, cmd);
if (ret < 0)
(C) dev_err(...);
return ret;
}
This patch replace dpcm_do_trigger() to soc_pcm_trigger().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87blfecssk.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These error paths return success but they should return -EINVAL.
Fixes: 97ed3e509e ("ASoC: max98390: Fix potential crash during param fw loading")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/X9B0uz4svyNTqeMb@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
Tha ARCHOS Cesium 140 tablet has problem with the jack-sensing,
thus the heaset functions are not working.
Add quirk for this model to select the correct input map, jack-detect
options and channel map to enable jack sensing and headset microphone.
This device uses IN1 for its internal MIC and JD2 for jack-detect.
Signed-off-by: Chris Chiu <chiu@endlessos.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20201208060414.27646-1-chiu@endlessos.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASUS laptop Q524UQK with ALC255 codec can't detect the headset
microphone until ALC255_FIXUP_ASUS_MIC_NO_PRESENCE quirk applied.
Signed-off-by: Chris Chiu <chiu@endlessos.org>
Signed-off-by: Jian-Hong Pan <jhp@endlessos.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201209045730.9972-1-chiu@endlessos.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To help in debugging issues with DisplayPort Multi-Stream Transport (aka
DP-MST) support, print information of active connections for each device
of a display audio pin widget.
Example output with the patch with two monitors connected to a DP-MST hub:
Devices: 4
Dev 00: PD = 0, ELDV = 0, IA = 0, Connections [ 0x03* 0x05 0x07 0x09 ]
Dev 01: PD = 1, ELDV = 1, IA = 0, Connections [ 0x03* 0x05 0x07 0x09 ]
*Dev 02: PD = 1, ELDV = 1, IA = 0, Connections [ 0x03 0x05* 0x07 0x09 ]
Dev 03: PD = 0, ELDV = 0, IA = 0, Connections [ 0x03* 0x05 0x07 0x09 ]
Connection: 4
0x03 0x05* 0x07 0x09
Format of existing "Connection:" entry is left intact to keep
compatibility.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201208185736.2877541-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Hi All,
Here are 2 simple fixes which are necessary to make the
cht_bsw_nau8824 machine driver work together with the
sof-audio-acpi driver.
Note that atm the sof topology files are missing a .tplg
file for this setup. Simply copying over the standard
sof-byte-codec.tplg file does the trick, but then some
mixer setting changes are necessary to fix the right
speaker/headphones channel not working; and those mixer
settings break the right channel when used with the
sst-acpi driver.
I've been trying to fix this at the tplg level so that
we do not need to change the mixer settings, but no luck
sofar. I'll post a RFC with the topology changes which
I have and we can discuss this further there.
These 2 simple fixes are necessary to make the sof-audio-acpi
driver work regardless of the topology issue.
Regards,
Hans
cz_da7219_init() does not check the return values of clk_get(),
while da7219_clk_enable() calls clk_set_rate() to dereference
the pointers.
Add checks to fix the problems.
Also, change clk_get() to devm_clk_get() to avoid data leak after
failures.
Fixes: bb24a31ed5 ("ASoC: AMD: Configure wclk and bclk of master codec")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Link: https://lore.kernel.org/r/20201204063610.513556-1-hslester96@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The cx2072x codec driver defines multiple DAIs with the same stream
name "Playback" and "Capture". Although the current code works more
or less as is as the secondary streams are never used, it still leads
the error message like:
debugfs: File 'Playback' in directory 'dapm' already present!
debugfs: File 'Capture' in directory 'dapm' already present!
Fix it by renaming the secondary streams to unique names.
Fixes: a497a43637 ("ASoC: Add support for Conexant CX2072X CODEC")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20201208135154.9188-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver is initially designed for sound card using HDMI
interface on i.MX platform. There is internal HDMI IP or
external HDMI modules connect with SAI or AUD2HTX interface.
It supports both transmitter and receiver devices.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/1607251319-5821-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The snd-soc-sst-acpi driver does not care about the id specified for
the SSP2-Codec DAI, but it does matter for the snd-sof-acpi driver;
and when it is not 0 then the snd-sof-acpi driver does not work.
Set the SSP2-Codec DAI id to 0, fixing the snd-sof-acpi driver not
working on devices using the cht_bsw_nau8824 machine-driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20201206122436.13553-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When using the snd-soc-sst-acpi driver then the compress-cpu-dai bits are
not used, the cht_bsw_nau8824 machine-driver is the only BYT/CHT driver
defining them.
When using the snd-sof-acpi driver then the presence of the
compress-cpu-dai bits breaks things because the sof topology file for
by/cht devices does not contain routing info for them.
Drop the compress-cpu-dai bits, fixing the snd-sof-acpi driver not
working on devices using the cht_bsw_nau8824 machine-driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20201206122436.13553-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The "filter" debugfs file defines the log levels used by
the firmware and reported by sof-logger.
The file contains the formatted entry list, where each entry
follows the following syntax in plain text:
log_level uuid_id pipe_id comp_id;
This file may be updated by userspace applications such sof-logger,
or directly by the user during debugging process.
An unused (wildcard) pipe_id or comp_id value should be set to -1,
uuid_id is hexadecimal value, so when unused then should be set to 0.
When the file is modified, an IPC command is sent to FW with new
trace levels for selected components in filter elements list.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201204165014.2697903-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A recent change removed the call to send the DAPM_STREAM_STOP
event in dpcm_fe_dai_shutdown. But this causes a regression
when a PCM prepare is not paired with a hw_free. So, add
the DAPM_STREAM_STOP event back to dpcm_fe_dai_shutdown()
to fix this.
The new sequence would be:
soc_pcm_prepare()
-> SND_SOC_DAPM_STREAM_START
soc_pcm_hw_free()
-> soc_pcm_hw_free()
-> SND_SOC_DAPM_STREAM_STOP
dpcm_fe_dai_shutdown()
-> SND_SOC_DAPM_STREAM_STOP
Note that the DAPM_STREAM_STOP will be called twice but it seems
harmless.
Fixes: a27b421f1d ('ASoC: pcm: call snd_soc_dapm_stream_stop() in soc_pcm_hw_clean')
Reported-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201202193343.912942-1-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASUS laptop X430UN with ALC256 can't detect the headset microphone
until ALC256_FIXUP_ASUS_MIC_NO_PRESENCE quirk applied.
Signed-off-by: Chris Chiu <chiu@endlessos.org>
Signed-off-by: Jian-Hong Pan <jhp@endlessos.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201207072755.16210-1-chiu@endlessos.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The snd_seq_queue struct contains various flags in the bit fields.
Those are categorized to two different use cases, both of which are
protected by different spinlocks. That implies that there are still
potential risks of the bad operations for bit fields by concurrent
accesses.
For addressing the problem, this patch rearranges those flags to be
a standard bool instead of a bit field.
Reported-by: syzbot+63cbe31877bb80ef58f5@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20201206083456.21110-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This change could fix 2 issues on this machine:
- the bass speaker's output volume can't be adjusted, that is because
the bass speaker is routed to the DAC (Nid 0x6) which has no volume
control.
- after plugging a headset with vol+, vol- and pause buttons on it,
press those buttons, nothing happens, this means those buttons
don't work at all. This machine has alc287 codec, need to add the
codec id to the disable/enable_headset_jack_key(), then the headset
button could work.
The quirk of ALC285_FIXUP_THINKPAD_HEADSET_JACK could fix both of these
2 issues.
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20201205051130.8122-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
YangHui
Takashi Iwai
Lars-Peter Clausen
Linus Torvalds
Jerome Brunet
Mark Brown
Bard Liao
Shuming Fan
Cezary Rojewski
Kuninori Morimoto
Srinivasa Rao Mandadapu
Amadej Kastelic
Robin Gong
Kailang Yang
Chris Chiu
Colin Ian King
shengjiu wang
Bartosz Golaszewski
Rafael J. Wysocki
Thomas Hebb
Dan Carpenter
Connor McAdams
Kai Vehmanen
Pierre-Louis Bossart
Tzung-Bi Shih
Amadeusz Sławiński
Ranjani Sridharan
Alexandre Belloni
Jaroslav Kysela
Derek Fang
Paul Cercueil
Christophe Branchereau
Chuhong Yuan
Hans de Goede
Karol Trzcinski
Hui Wang
Arnd Bergmann