Patch series "drivers/char: remove /dev/kmem for good".
Exploring /dev/kmem and /dev/mem in the context of memory hot(un)plug and
memory ballooning, I started questioning the existence of /dev/kmem.
Comparing it with the /proc/kcore implementation, it does not seem to be
able to deal with things like
a) Pages unmapped from the direct mapping (e.g., to be used by secretmem)
-> kern_addr_valid(). virt_addr_valid() is not sufficient.
b) Special cases like gart aperture memory that is not to be touched
-> mem_pfn_is_ram()
Unless I am missing something, it's at least broken in some cases and might
fault/crash the machine.
Looks like its existence has been questioned before in 2005 and 2010 [1],
after ~11 additional years, it might make sense to revive the discussion.
CONFIG_DEVKMEM is only enabled in a single defconfig (on purpose or by
mistake?). All distributions disable it: in Ubuntu it has been disabled
for more than 10 years, in Debian since 2.6.31, in Fedora at least
starting with FC3, in RHEL starting with RHEL4, in SUSE starting from
15sp2, and OpenSUSE has it disabled as well.
1) /dev/kmem was popular for rootkits [2] before it got disabled
basically everywhere. Ubuntu documents [3] "There is no modern user of
/dev/kmem any more beyond attackers using it to load kernel rootkits.".
RHEL documents in a BZ [5] "it served no practical purpose other than to
serve as a potential security problem or to enable binary module drivers
to access structures/functions they shouldn't be touching"
2) /proc/kcore is a decent interface to have a controlled way to read
kernel memory for debugging puposes. (will need some extensions to
deal with memory offlining/unplug, memory ballooning, and poisoned
pages, though)
3) It might be useful for corner case debugging [1]. KDB/KGDB might be a
better fit, especially, to write random memory; harder to shoot
yourself into the foot.
4) "Kernel Memory Editor" [4] hasn't seen any updates since 2000 and seems
to be incompatible with 64bit [1]. For educational purposes,
/proc/kcore might be used to monitor value updates -- or older
kernels can be used.
5) It's broken on arm64, and therefore, completely disabled there.
Looks like it's essentially unused and has been replaced by better
suited interfaces for individual tasks (/proc/kcore, KDB/KGDB). Let's
just remove it.
[1] https://lwn.net/Articles/147901/
[2] https://www.linuxjournal.com/article/10505
[3] https://wiki.ubuntu.com/Security/Features#A.2Fdev.2Fkmem_disabled
[4] https://sourceforge.net/projects/kme/
[5] https://bugzilla.redhat.com/show_bug.cgi?id=154796
Link: https://lkml.kernel.org/r/20210324102351.6932-1-david@redhat.com
Link: https://lkml.kernel.org/r/20210324102351.6932-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Alexander A. Klimov" <grandmaster@al2klimov.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Chris Zankel <chris@zankel.net>
Cc: Corentin Labbe <clabbe@baylibre.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Gregory Clement <gregory.clement@bootlin.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Hillf Danton <hdanton@sina.com>
Cc: huang ying <huang.ying.caritas@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: James Troup <james.troup@canonical.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kairui Song <kasong@redhat.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com>
Cc: openrisc@lists.librecores.org
Cc: Palmer Dabbelt <palmerdabbelt@google.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Pavel Machek (CIP)" <pavel@denx.de>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Pierre Morel <pmorel@linux.ibm.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Rich Felker <dalias@libc.org>
Cc: Robert Richter <rric@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: sparclinux@vger.kernel.org
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Theodore Dubois <tblodt@icloud.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: William Cohen <wcohen@redhat.com>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge more updates from Andrew Morton:
"The remainder of the main mm/ queue.
143 patches.
Subsystems affected by this patch series (all mm): pagecache, hugetlb,
userfaultfd, vmscan, compaction, migration, cma, ksm, vmstat, mmap,
kconfig, util, memory-hotplug, zswap, zsmalloc, highmem, cleanups, and
kfence"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (143 commits)
kfence: use power-efficient work queue to run delayed work
kfence: maximize allocation wait timeout duration
kfence: await for allocation using wait_event
kfence: zero guard page after out-of-bounds access
mm/process_vm_access.c: remove duplicate include
mm/mempool: minor coding style tweaks
mm/highmem.c: fix coding style issue
btrfs: use memzero_page() instead of open coded kmap pattern
iov_iter: lift memzero_page() to highmem.h
mm/zsmalloc: use BUG_ON instead of if condition followed by BUG.
mm/zswap.c: switch from strlcpy to strscpy
arm64/Kconfig: introduce ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE
x86/Kconfig: introduce ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE
mm,memory_hotplug: add kernel boot option to enable memmap_on_memory
acpi,memhotplug: enable MHP_MEMMAP_ON_MEMORY when supported
mm,memory_hotplug: allocate memmap from the added memory range
mm,memory_hotplug: factor out adjusting present pages into adjust_present_page_count()
mm,memory_hotplug: relax fully spanned sections check
drivers/base/memory: introduce memory_block_{online,offline}
mm/memory_hotplug: remove broken locking of zone PCP structures during hot remove
...
SYS_SUPPORTS_HUGETLBFS config has duplicate definitions on platforms
that subscribe it. Instead, just make it a generic option which can be
selected on applicable platforms.
Also rename it as ARCH_SUPPORTS_HUGETLBFS instead. This reduces code
duplication and makes it cleaner.
Link: https://lkml.kernel.org/r/1617259448-22529-3-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> [riscv]
Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "hugetlb: Disable huge pmd unshare for uffd-wp", v4.
This series tries to disable huge pmd unshare of hugetlbfs backed memory
for uffd-wp. Although uffd-wp of hugetlbfs is still during rfc stage,
the idea of this series may be needed for multiple tasks (Axel's uffd
minor fault series, and Mike's soft dirty series), so I picked it out
from the larger series.
This patch (of 4):
It is a preparation work to be able to behave differently in the per
architecture huge_pte_alloc() according to different VMA attributes.
Pass it deeper into huge_pmd_share() so that we can avoid the find_vma() call.
[peterx@redhat.com: build fix]
Link: https://lkml.kernel.org/r/20210304164653.GB397383@xz-x1Link: https://lkml.kernel.org/r/20210218230633.15028-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20210218230633.15028-2-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Suggested-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Adam Ruprecht <ruprecht@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Cannon Matthews <cannonmatthews@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michal Koutn" <mkoutny@suse.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oliver Upton <oupton@google.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Shawn Anastasio <shawn@anastas.io>
Cc: Steven Price <steven.price@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
'cross_compiling' is defined by the top Makefile and available for
arch Makefiles to check whether it is a cross build or not. A good
thing is the variable name 'cross_compiling' is self-documenting.
This is a simple replacement for m68k, mips, sh, for which $(ARCH)
and $(SRCARCH) always match.
No functional change is intended for xtensa, either.
This is rather a fix for parisc because arch/parisc/Makefile defines
UTS_MATCHINE depending on CONFIG_64BIT, therefore cc-cross-prefix
is not working in Kconfig time.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Acked-by: Max Filippov <jcmvbkbc@gmail.com> # xtensa
New feature:
The "func-no-repeats" option in tracefs/options directory. When set
the function tracer will detect if the current function being traced
is the same as the previous one, and instead of recording it, it will
keep track of the number of times that the function is repeated in a row.
And when another function is recorded, it will write a new event that
shows the function that repeated, the number of times it repeated and
the time stamp of when the last repeated function occurred.
Enhancements:
In order to implement the above "func-no-repeats" option, the ring
buffer timestamp can now give the accurate timestamp of the event
as it is being recorded, instead of having to record an absolute
timestamp for all events. This helps the histogram code which no longer
needs to waste ring buffer space.
New validation logic to make sure all trace events that access
dereferenced pointers do so in a safe way, and will warn otherwise.
Fixes:
No longer limit the PIDs of tasks that are recorded for "saved_cmdlines"
to PID_MAX_DEFAULT (32768), as systemd now allows for a much larger
range. This caused the mapping of PIDs to the task names to be dropped
for all tasks with a PID greater than 32768.
Change trace_clock_global() to never block. This caused a deadlock.
Clean ups:
Typos, prototype fixes, and removing of duplicate or unused code.
Better management of ftrace_page allocations.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYI/1vBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qiL0AP9EemIC5TDh2oihqLRNeUjdTu0ryEoM
HRFqxozSF985twD/bfkt86KQC8rLHwxTbxQZ863bmdaC6cMGFhWiF+H/MAs=
=psYt
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"New feature:
- A new "func-no-repeats" option in tracefs/options directory.
When set the function tracer will detect if the current function
being traced is the same as the previous one, and instead of
recording it, it will keep track of the number of times that the
function is repeated in a row. And when another function is
recorded, it will write a new event that shows the function that
repeated, the number of times it repeated and the time stamp of
when the last repeated function occurred.
Enhancements:
- In order to implement the above "func-no-repeats" option, the ring
buffer timestamp can now give the accurate timestamp of the event
as it is being recorded, instead of having to record an absolute
timestamp for all events. This helps the histogram code which no
longer needs to waste ring buffer space.
- New validation logic to make sure all trace events that access
dereferenced pointers do so in a safe way, and will warn otherwise.
Fixes:
- No longer limit the PIDs of tasks that are recorded for
"saved_cmdlines" to PID_MAX_DEFAULT (32768), as systemd now allows
for a much larger range. This caused the mapping of PIDs to the
task names to be dropped for all tasks with a PID greater than
32768.
- Change trace_clock_global() to never block. This caused a deadlock.
Clean ups:
- Typos, prototype fixes, and removing of duplicate or unused code.
- Better management of ftrace_page allocations"
* tag 'trace-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (32 commits)
tracing: Restructure trace_clock_global() to never block
tracing: Map all PIDs to command lines
ftrace: Reuse the output of the function tracer for func_repeats
tracing: Add "func_no_repeats" option for function tracing
tracing: Unify the logic for function tracing options
tracing: Add method for recording "func_repeats" events
tracing: Add "last_func_repeats" to struct trace_array
tracing: Define new ftrace event "func_repeats"
tracing: Define static void trace_print_time()
ftrace: Simplify the calculation of page number for ftrace_page->records some more
ftrace: Store the order of pages allocated in ftrace_page
tracing: Remove unused argument from "ring_buffer_time_stamp()
tracing: Remove duplicate struct declaration in trace_events.h
tracing: Update create_system_filter() kernel-doc comment
tracing: A minor cleanup for create_system_filter()
kernel: trace: Mundane typo fixes in the file trace_events_filter.c
tracing: Fix various typos in comments
scripts/recordmcount.pl: Make vim and emacs indent the same
scripts/recordmcount.pl: Make indent spacing consistent
tracing: Add a verifier to check string pointers for trace events
...
-----BEGIN PGP SIGNATURE-----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=uCN4
-----END PGP SIGNATURE-----
Merge tag 'landlock_v34' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull Landlock LSM from James Morris:
"Add Landlock, a new LSM from Mickaël Salaün.
Briefly, Landlock provides for unprivileged application sandboxing.
From Mickaël's cover letter:
"The goal of Landlock is to enable to restrict ambient rights (e.g.
global filesystem access) for a set of processes. Because Landlock
is a stackable LSM [1], it makes possible to create safe security
sandboxes as new security layers in addition to the existing
system-wide access-controls. This kind of sandbox is expected to
help mitigate the security impact of bugs or unexpected/malicious
behaviors in user-space applications. Landlock empowers any
process, including unprivileged ones, to securely restrict
themselves.
Landlock is inspired by seccomp-bpf but instead of filtering
syscalls and their raw arguments, a Landlock rule can restrict the
use of kernel objects like file hierarchies, according to the
kernel semantic. Landlock also takes inspiration from other OS
sandbox mechanisms: XNU Sandbox, FreeBSD Capsicum or OpenBSD
Pledge/Unveil.
In this current form, Landlock misses some access-control features.
This enables to minimize this patch series and ease review. This
series still addresses multiple use cases, especially with the
combined use of seccomp-bpf: applications with built-in sandboxing,
init systems, security sandbox tools and security-oriented APIs [2]"
The cover letter and v34 posting is here:
https://lore.kernel.org/linux-security-module/20210422154123.13086-1-mic@digikod.net/
See also:
https://landlock.io/
This code has had extensive design discussion and review over several
years"
Link: https://lore.kernel.org/lkml/50db058a-7dde-441b-a7f9-f6837fe8b69f@schaufler-ca.com/ [1]
Link: https://lore.kernel.org/lkml/f646e1c7-33cf-333f-070c-0a40ad0468cd@digikod.net/ [2]
* tag 'landlock_v34' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
landlock: Enable user space to infer supported features
landlock: Add user and kernel documentation
samples/landlock: Add a sandbox manager example
selftests/landlock: Add user space tests
landlock: Add syscall implementations
arch: Wire up Landlock syscalls
fs,security: Add sb_delete hook
landlock: Support filesystem access-control
LSM: Infrastructure management of the superblock
landlock: Add ptrace restrictions
landlock: Set up the security framework and manage credentials
landlock: Add ruleset and domain management
landlock: Add object management
- Stage-2 isolation for the host kernel when running in protected mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
x86:
- Optimizations and cleanup of nested SVM code
- AMD: Support for virtual SPEC_CTRL
- Optimizations of the new MMU code: fast invalidation,
zap under read lock, enable/disably dirty page logging under
read lock
- /dev/kvm API for AMD SEV live migration (guest API coming soon)
- support SEV virtual machines sharing the same encryption context
- support SGX in virtual machines
- add a few more statistics
- improved directed yield heuristics
- Lots and lots of cleanups
Generic:
- Rework of MMU notifier interface, simplifying and optimizing
the architecture-specific code
- Some selftests improvements
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmCJ13kUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroM1HAgAqzPxEtiTPTFeFJV5cnPPJ3dFoFDK
y/juZJUQ1AOtvuWzzwuf175ewkv9vfmtG6rVohpNSkUlJYeoc6tw7n8BTTzCVC1b
c/4Dnrjeycr6cskYlzaPyV6MSgjSv5gfyj1LA5UEM16LDyekmaynosVWY5wJhju+
Bnyid8l8Utgz+TLLYogfQJQECCrsU0Wm//n+8TWQgLf1uuiwshU5JJe7b43diJrY
+2DX+8p9yWXCTz62sCeDWNahUv8AbXpMeJ8uqZPYcN1P0gSEUGu8xKmLOFf9kR7b
M4U1Gyz8QQbjd2lqnwiWIkvRLX6gyGVbq2zH0QbhUe5gg3qGUX7JjrhdDQ==
=AXUi
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"This is a large update by KVM standards, including AMD PSP (Platform
Security Processor, aka "AMD Secure Technology") and ARM CoreSight
(debug and trace) changes.
ARM:
- CoreSight: Add support for ETE and TRBE
- Stage-2 isolation for the host kernel when running in protected
mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
x86:
- AMD PSP driver changes
- Optimizations and cleanup of nested SVM code
- AMD: Support for virtual SPEC_CTRL
- Optimizations of the new MMU code: fast invalidation, zap under
read lock, enable/disably dirty page logging under read lock
- /dev/kvm API for AMD SEV live migration (guest API coming soon)
- support SEV virtual machines sharing the same encryption context
- support SGX in virtual machines
- add a few more statistics
- improved directed yield heuristics
- Lots and lots of cleanups
Generic:
- Rework of MMU notifier interface, simplifying and optimizing the
architecture-specific code
- a handful of "Get rid of oprofile leftovers" patches
- Some selftests improvements"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (379 commits)
KVM: selftests: Speed up set_memory_region_test
selftests: kvm: Fix the check of return value
KVM: x86: Take advantage of kvm_arch_dy_has_pending_interrupt()
KVM: SVM: Skip SEV cache flush if no ASIDs have been used
KVM: SVM: Remove an unnecessary prototype declaration of sev_flush_asids()
KVM: SVM: Drop redundant svm_sev_enabled() helper
KVM: SVM: Move SEV VMCB tracking allocation to sev.c
KVM: SVM: Explicitly check max SEV ASID during sev_hardware_setup()
KVM: SVM: Unconditionally invoke sev_hardware_teardown()
KVM: SVM: Enable SEV/SEV-ES functionality by default (when supported)
KVM: SVM: Condition sev_enabled and sev_es_enabled on CONFIG_KVM_AMD_SEV=y
KVM: SVM: Append "_enabled" to module-scoped SEV/SEV-ES control variables
KVM: SEV: Mask CPUID[0x8000001F].eax according to supported features
KVM: SVM: Move SEV module params/variables to sev.c
KVM: SVM: Disable SEV/SEV-ES if NPT is disabled
KVM: SVM: Free sev_asid_bitmap during init if SEV setup fails
KVM: SVM: Zero out the VMCB array used to track SEV ASID association
x86/sev: Drop redundant and potentially misleading 'sev_enabled'
KVM: x86: Move reverse CPUID helpers to separate header file
KVM: x86: Rename GPR accessors to make mode-aware variants the defaults
...
Many architectures duplicate similar shell scripts.
This commit converts sh to use scripts/syscallhdr.sh.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Many architectures duplicate similar shell scripts.
This commit converts sh to use scripts/syscalltbl.sh.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
mem_init_print_info() is called in mem_init() on each architecture, and
pass NULL argument, so using void argument and move it into mm_init().
Link: https://lkml.kernel.org/r/20210317015210.33641-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com> [x86]
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr> [powerpc]
Acked-by: David Hildenbrand <david@redhat.com>
Tested-by: Anatoly Pugachev <matorola@gmail.com> [sparc64]
Acked-by: Russell King <rmk+kernel@armlinux.org.uk> [arm]
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Guo Ren <guoren@kernel.org>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "Peter Zijlstra" <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
page_mapping_file() is only used by some architectures, and then it
is usually only used in one place. Make it a static inline function
so other architectures don't have to carry this dead code.
Link: https://lkml.kernel.org/r/20210317123011.350118-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Huang Ying <ying.huang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=oc8u
-----END PGP SIGNATURE-----
Merge tag 'io_uring-worker.v3-2021-02-25' of git://git.kernel.dk/linux-block
Pull io_uring thread rewrite from Jens Axboe:
"This converts the io-wq workers to be forked off the tasks in question
instead of being kernel threads that assume various bits of the
original task identity.
This kills > 400 lines of code from io_uring/io-wq, and it's the worst
part of the code. We've had several bugs in this area, and the worry
is always that we could be missing some pieces for file types doing
unusual things (recent /dev/tty example comes to mind, userfaultfd
reads installing file descriptors is another fun one... - both of
which need special handling, and I bet it's not the last weird oddity
we'll find).
With these identical workers, we can have full confidence that we're
never missing anything. That, in itself, is a huge win. Outside of
that, it's also more efficient since we're not wasting space and code
on tracking state, or switching between different states.
I'm sure we're going to find little things to patch up after this
series, but testing has been pretty thorough, from the usual
regression suite to production. Any issue that may crop up should be
manageable.
There's also a nice series of further reductions we can do on top of
this, but I wanted to get the meat of it out sooner rather than later.
The general worry here isn't that it's fundamentally broken. Most of
the little issues we've found over the last week have been related to
just changes in how thread startup/exit is done, since that's the main
difference between using kthreads and these kinds of threads. In fact,
if all goes according to plan, I want to get this into the 5.10 and
5.11 stable branches as well.
That said, the changes outside of io_uring/io-wq are:
- arch setup, simple one-liner to each arch copy_thread()
implementation.
- Removal of net and proc restrictions for io_uring, they are no
longer needed or useful"
* tag 'io_uring-worker.v3-2021-02-25' of git://git.kernel.dk/linux-block: (30 commits)
io-wq: remove now unused IO_WQ_BIT_ERROR
io_uring: fix SQPOLL thread handling over exec
io-wq: improve manager/worker handling over exec
io_uring: ensure SQPOLL startup is triggered before error shutdown
io-wq: make buffered file write hashed work map per-ctx
io-wq: fix race around io_worker grabbing
io-wq: fix races around manager/worker creation and task exit
io_uring: ensure io-wq context is always destroyed for tasks
arch: ensure parisc/powerpc handle PF_IO_WORKER in copy_thread()
io_uring: cleanup ->user usage
io-wq: remove nr_process accounting
io_uring: flag new native workers with IORING_FEAT_NATIVE_WORKERS
net: remove cmsg restriction from io_uring based send/recvmsg calls
Revert "proc: don't allow async path resolution of /proc/self components"
Revert "proc: don't allow async path resolution of /proc/thread-self components"
io_uring: move SQPOLL thread io-wq forked worker
io-wq: make io_wq_fork_thread() available to other users
io-wq: only remove worker from free_list, if it was there
io_uring: remove io_identity
io_uring: remove any grabbing of context
...
Pull misc vfs updates from Al Viro:
"Assorted stuff pile - no common topic here"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
whack-a-mole: don't open-code iminor/imajor
9p: fix misuse of sscanf() in v9fs_stat2inode()
audit_alloc_mark(): don't open-code ERR_CAST()
fs/inode.c: make inode_init_always() initialize i_ino to 0
vfs: don't unnecessarily clone write access for writable fds
- Fix false-positive build warnings for ARCH=ia64 builds
- Optimize dictionary size for module compression with xz
- Check the compiler and linker versions in Kconfig
- Fix misuse of extra-y
- Support DWARF v5 debug info
- Clamp SUBLEVEL to 255 because stable releases 4.4.x and 4.9.x
exceeded the limit
- Add generic syscall{tbl,hdr}.sh for cleanups across arches
- Minor cleanups of genksyms
- Minor cleanups of Kconfig
-----BEGIN PGP SIGNATURE-----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=sLxb
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Fix false-positive build warnings for ARCH=ia64 builds
- Optimize dictionary size for module compression with xz
- Check the compiler and linker versions in Kconfig
- Fix misuse of extra-y
- Support DWARF v5 debug info
- Clamp SUBLEVEL to 255 because stable releases 4.4.x and 4.9.x
exceeded the limit
- Add generic syscall{tbl,hdr}.sh for cleanups across arches
- Minor cleanups of genksyms
- Minor cleanups of Kconfig
* tag 'kbuild-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (38 commits)
initramfs: Remove redundant dependency of RD_ZSTD on BLK_DEV_INITRD
kbuild: remove deprecated 'always' and 'hostprogs-y/m'
kbuild: parse C= and M= before changing the working directory
kbuild: reuse this-makefile to define abs_srctree
kconfig: unify rule of config, menuconfig, nconfig, gconfig, xconfig
kconfig: omit --oldaskconfig option for 'make config'
kconfig: fix 'invalid option' for help option
kconfig: remove dead code in conf_askvalue()
kconfig: clean up nested if-conditionals in check_conf()
kconfig: Remove duplicate call to sym_get_string_value()
Makefile: Remove # characters from compiler string
Makefile: reuse CC_VERSION_TEXT
kbuild: check the minimum linker version in Kconfig
kbuild: remove ld-version macro
scripts: add generic syscallhdr.sh
scripts: add generic syscalltbl.sh
arch: syscalls: remove $(srctree)/ prefix from syscall tables
arch: syscalls: add missing FORCE and fix 'targets' to make if_changed work
gen_compile_commands: prune some directories
kbuild: simplify access to the kernel's version
...
The irq stack switching was moved out of the ASM entry code in course of
the entry code consolidation. It ended up being suboptimal in various
ways.
- Make the stack switching inline so the stackpointer manipulation is not
longer at an easy to find place.
- Get rid of the unnecessary indirect call.
- Avoid the double stack switching in interrupt return and reuse the
interrupt stack for softirq handling.
- A objtool fix for CONFIG_FRAME_POINTER=y builds where it got confused
about the stack pointer manipulation.
-----BEGIN PGP SIGNATURE-----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=Sqr1
-----END PGP SIGNATURE-----
Merge tag 'x86-entry-2021-02-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 irq entry updates from Thomas Gleixner:
"The irq stack switching was moved out of the ASM entry code in course
of the entry code consolidation. It ended up being suboptimal in
various ways.
This reworks the X86 irq stack handling:
- Make the stack switching inline so the stackpointer manipulation is
not longer at an easy to find place.
- Get rid of the unnecessary indirect call.
- Avoid the double stack switching in interrupt return and reuse the
interrupt stack for softirq handling.
- A objtool fix for CONFIG_FRAME_POINTER=y builds where it got
confused about the stack pointer manipulation"
* tag 'x86-entry-2021-02-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix stack-swizzle for FRAME_POINTER=y
um: Enforce the usage of asm-generic/softirq_stack.h
x86/softirq/64: Inline do_softirq_own_stack()
softirq: Move do_softirq_own_stack() to generic asm header
softirq: Move __ARCH_HAS_DO_SOFTIRQ to Kconfig
x86: Select CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK
x86/softirq: Remove indirection in do_softirq_own_stack()
x86/entry: Use run_sysvec_on_irqstack_cond() for XEN upcall
x86/entry: Convert device interrupts to inline stack switching
x86/entry: Convert system vectors to irq stack macro
x86/irq: Provide macro for inlining irq stack switching
x86/apic: Split out spurious handling code
x86/irq/64: Adjust the per CPU irq stack pointer by 8
x86/irq: Sanitize irq stack tracking
x86/entry: Fix instrumentation annotation
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYCegywAKCRCRxhvAZXjc
ouJ6AQDlf+7jCQlQdeKKoN9QDFfMzG1ooemat36EpRRTONaGuAD8D9A4sUsG4+5f
4IU5Lj9oY4DEmF8HenbWK2ZHsesL2Qg=
=yPaw
-----END PGP SIGNATURE-----
Merge tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull idmapped mounts from Christian Brauner:
"This introduces idmapped mounts which has been in the making for some
time. Simply put, different mounts can expose the same file or
directory with different ownership. This initial implementation comes
with ports for fat, ext4 and with Christoph's port for xfs with more
filesystems being actively worked on by independent people and
maintainers.
Idmapping mounts handle a wide range of long standing use-cases. Here
are just a few:
- Idmapped mounts make it possible to easily share files between
multiple users or multiple machines especially in complex
scenarios. For example, idmapped mounts will be used in the
implementation of portable home directories in
systemd-homed.service(8) where they allow users to move their home
directory to an external storage device and use it on multiple
computers where they are assigned different uids and gids. This
effectively makes it possible to assign random uids and gids at
login time.
- It is possible to share files from the host with unprivileged
containers without having to change ownership permanently through
chown(2).
- It is possible to idmap a container's rootfs and without having to
mangle every file. For example, Chromebooks use it to share the
user's Download folder with their unprivileged containers in their
Linux subsystem.
- It is possible to share files between containers with
non-overlapping idmappings.
- Filesystem that lack a proper concept of ownership such as fat can
use idmapped mounts to implement discretionary access (DAC)
permission checking.
- They allow users to efficiently changing ownership on a per-mount
basis without having to (recursively) chown(2) all files. In
contrast to chown (2) changing ownership of large sets of files is
instantenous with idmapped mounts. This is especially useful when
ownership of a whole root filesystem of a virtual machine or
container is changed. With idmapped mounts a single syscall
mount_setattr syscall will be sufficient to change the ownership of
all files.
- Idmapped mounts always take the current ownership into account as
idmappings specify what a given uid or gid is supposed to be mapped
to. This contrasts with the chown(2) syscall which cannot by itself
take the current ownership of the files it changes into account. It
simply changes the ownership to the specified uid and gid. This is
especially problematic when recursively chown(2)ing a large set of
files which is commong with the aforementioned portable home
directory and container and vm scenario.
- Idmapped mounts allow to change ownership locally, restricting it
to specific mounts, and temporarily as the ownership changes only
apply as long as the mount exists.
Several userspace projects have either already put up patches and
pull-requests for this feature or will do so should you decide to pull
this:
- systemd: In a wide variety of scenarios but especially right away
in their implementation of portable home directories.
https://systemd.io/HOME_DIRECTORY/
- container runtimes: containerd, runC, LXD:To share data between
host and unprivileged containers, unprivileged and privileged
containers, etc. The pull request for idmapped mounts support in
containerd, the default Kubernetes runtime is already up for quite
a while now: https://github.com/containerd/containerd/pull/4734
- The virtio-fs developers and several users have expressed interest
in using this feature with virtual machines once virtio-fs is
ported.
- ChromeOS: Sharing host-directories with unprivileged containers.
I've tightly synced with all those projects and all of those listed
here have also expressed their need/desire for this feature on the
mailing list. For more info on how people use this there's a bunch of
talks about this too. Here's just two recent ones:
https://www.cncf.io/wp-content/uploads/2020/12/Rootless-Containers-in-Gitpod.pdfhttps://fosdem.org/2021/schedule/event/containers_idmap/
This comes with an extensive xfstests suite covering both ext4 and
xfs:
https://git.kernel.org/brauner/xfstests-dev/h/idmapped_mounts
It covers truncation, creation, opening, xattrs, vfscaps, setid
execution, setgid inheritance and more both with idmapped and
non-idmapped mounts. It already helped to discover an unrelated xfs
setgid inheritance bug which has since been fixed in mainline. It will
be sent for inclusion with the xfstests project should you decide to
merge this.
In order to support per-mount idmappings vfsmounts are marked with
user namespaces. The idmapping of the user namespace will be used to
map the ids of vfs objects when they are accessed through that mount.
By default all vfsmounts are marked with the initial user namespace.
The initial user namespace is used to indicate that a mount is not
idmapped. All operations behave as before and this is verified in the
testsuite.
Based on prior discussions we want to attach the whole user namespace
and not just a dedicated idmapping struct. This allows us to reuse all
the helpers that already exist for dealing with idmappings instead of
introducing a whole new range of helpers. In addition, if we decide in
the future that we are confident enough to enable unprivileged users
to setup idmapped mounts the permission checking can take into account
whether the caller is privileged in the user namespace the mount is
currently marked with.
The user namespace the mount will be marked with can be specified by
passing a file descriptor refering to the user namespace as an
argument to the new mount_setattr() syscall together with the new
MOUNT_ATTR_IDMAP flag. The system call follows the openat2() pattern
of extensibility.
The following conditions must be met in order to create an idmapped
mount:
- The caller must currently have the CAP_SYS_ADMIN capability in the
user namespace the underlying filesystem has been mounted in.
- The underlying filesystem must support idmapped mounts.
- The mount must not already be idmapped. This also implies that the
idmapping of a mount cannot be altered once it has been idmapped.
- The mount must be a detached/anonymous mount, i.e. it must have
been created by calling open_tree() with the OPEN_TREE_CLONE flag
and it must not already have been visible in the filesystem.
The last two points guarantee easier semantics for userspace and the
kernel and make the implementation significantly simpler.
By default vfsmounts are marked with the initial user namespace and no
behavioral or performance changes are observed.
The manpage with a detailed description can be found here:
1d7b902e28
In order to support idmapped mounts, filesystems need to be changed
and mark themselves with the FS_ALLOW_IDMAP flag in fs_flags. The
patches to convert individual filesystem are not very large or
complicated overall as can be seen from the included fat, ext4, and
xfs ports. Patches for other filesystems are actively worked on and
will be sent out separately. The xfstestsuite can be used to verify
that port has been done correctly.
The mount_setattr() syscall is motivated independent of the idmapped
mounts patches and it's been around since July 2019. One of the most
valuable features of the new mount api is the ability to perform
mounts based on file descriptors only.
Together with the lookup restrictions available in the openat2()
RESOLVE_* flag namespace which we added in v5.6 this is the first time
we are close to hardened and race-free (e.g. symlinks) mounting and
path resolution.
While userspace has started porting to the new mount api to mount
proper filesystems and create new bind-mounts it is currently not
possible to change mount options of an already existing bind mount in
the new mount api since the mount_setattr() syscall is missing.
With the addition of the mount_setattr() syscall we remove this last
restriction and userspace can now fully port to the new mount api,
covering every use-case the old mount api could. We also add the
crucial ability to recursively change mount options for a whole mount
tree, both removing and adding mount options at the same time. This
syscall has been requested multiple times by various people and
projects.
There is a simple tool available at
https://github.com/brauner/mount-idmapped
that allows to create idmapped mounts so people can play with this
patch series. I'll add support for the regular mount binary should you
decide to pull this in the following weeks:
Here's an example to a simple idmapped mount of another user's home
directory:
u1001@f2-vm:/$ sudo ./mount --idmap both:1000:1001:1 /home/ubuntu/ /mnt
u1001@f2-vm:/$ ls -al /home/ubuntu/
total 28
drwxr-xr-x 2 ubuntu ubuntu 4096 Oct 28 22:07 .
drwxr-xr-x 4 root root 4096 Oct 28 04:00 ..
-rw------- 1 ubuntu ubuntu 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 ubuntu ubuntu 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 ubuntu ubuntu 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 ubuntu ubuntu 807 Feb 25 2020 .profile
-rw-r--r-- 1 ubuntu ubuntu 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 ubuntu ubuntu 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ ls -al /mnt/
total 28
drwxr-xr-x 2 u1001 u1001 4096 Oct 28 22:07 .
drwxr-xr-x 29 root root 4096 Oct 28 22:01 ..
-rw------- 1 u1001 u1001 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 u1001 u1001 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 u1001 u1001 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 u1001 u1001 807 Feb 25 2020 .profile
-rw-r--r-- 1 u1001 u1001 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 u1001 u1001 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ touch /mnt/my-file
u1001@f2-vm:/$ setfacl -m u:1001:rwx /mnt/my-file
u1001@f2-vm:/$ sudo setcap -n 1001 cap_net_raw+ep /mnt/my-file
u1001@f2-vm:/$ ls -al /mnt/my-file
-rw-rwxr--+ 1 u1001 u1001 0 Oct 28 22:14 /mnt/my-file
u1001@f2-vm:/$ ls -al /home/ubuntu/my-file
-rw-rwxr--+ 1 ubuntu ubuntu 0 Oct 28 22:14 /home/ubuntu/my-file
u1001@f2-vm:/$ getfacl /mnt/my-file
getfacl: Removing leading '/' from absolute path names
# file: mnt/my-file
# owner: u1001
# group: u1001
user::rw-
user:u1001:rwx
group::rw-
mask::rwx
other::r--
u1001@f2-vm:/$ getfacl /home/ubuntu/my-file
getfacl: Removing leading '/' from absolute path names
# file: home/ubuntu/my-file
# owner: ubuntu
# group: ubuntu
user::rw-
user:ubuntu:rwx
group::rw-
mask::rwx
other::r--"
* tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: (41 commits)
xfs: remove the possibly unused mp variable in xfs_file_compat_ioctl
xfs: support idmapped mounts
ext4: support idmapped mounts
fat: handle idmapped mounts
tests: add mount_setattr() selftests
fs: introduce MOUNT_ATTR_IDMAP
fs: add mount_setattr()
fs: add attr_flags_to_mnt_flags helper
fs: split out functions to hold writers
namespace: only take read lock in do_reconfigure_mnt()
mount: make {lock,unlock}_mount_hash() static
namespace: take lock_mount_hash() directly when changing flags
nfs: do not export idmapped mounts
overlayfs: do not mount on top of idmapped mounts
ecryptfs: do not mount on top of idmapped mounts
ima: handle idmapped mounts
apparmor: handle idmapped mounts
fs: make helpers idmap mount aware
exec: handle idmapped mounts
would_dump: handle idmapped mounts
...
Summary of modules changes for the 5.12 merge window:
- Retire EXPORT_UNUSED_SYMBOL() and EXPORT_SYMBOL_GPL_FUTURE(). These export
types were introduced between 2006 - 2008. All the of the unused symbols have
been long removed and gpl future symbols were converted to gpl quite a long
time ago, and I don't believe these export types have been used ever since.
So, I think it should be safe to retire those export types now. (Christoph Hellwig)
- Refactor and clean up some aged code cruft in the module loader (Christoph Hellwig)
- Build {,module_}kallsyms_on_each_symbol only when livepatching is enabled, as
it is the only caller (Christoph Hellwig)
- Unexport find_module() and module_mutex and fix the last module
callers to not rely on these anymore. Make module_mutex internal to
the module loader. (Christoph Hellwig)
- Harden ELF checks on module load and validate ELF structures before checking
the module signature (Frank van der Linden)
- Fix undefined symbol warning for clang (Fangrui Song)
- Fix smatch warning (Dan Carpenter)
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=T29Q
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module updates from Jessica Yu:
- Retire EXPORT_UNUSED_SYMBOL() and EXPORT_SYMBOL_GPL_FUTURE(). These
export types were introduced between 2006 - 2008. All the of the
unused symbols have been long removed and gpl future symbols were
converted to gpl quite a long time ago, and I don't believe these
export types have been used ever since. So, I think it should be safe
to retire those export types now (Christoph Hellwig)
- Refactor and clean up some aged code cruft in the module loader
(Christoph Hellwig)
- Build {,module_}kallsyms_on_each_symbol only when livepatching is
enabled, as it is the only caller (Christoph Hellwig)
- Unexport find_module() and module_mutex and fix the last module
callers to not rely on these anymore. Make module_mutex internal to
the module loader (Christoph Hellwig)
- Harden ELF checks on module load and validate ELF structures before
checking the module signature (Frank van der Linden)
- Fix undefined symbol warning for clang (Fangrui Song)
- Fix smatch warning (Dan Carpenter)
* tag 'modules-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: potential uninitialized return in module_kallsyms_on_each_symbol()
module: remove EXPORT_UNUSED_SYMBOL*
module: remove EXPORT_SYMBOL_GPL_FUTURE
module: move struct symsearch to module.c
module: pass struct find_symbol_args to find_symbol
module: merge each_symbol_section into find_symbol
module: remove each_symbol_in_section
module: mark module_mutex static
kallsyms: only build {,module_}kallsyms_on_each_symbol when required
kallsyms: refactor {,module_}kallsyms_on_each_symbol
module: use RCU to synchronize find_module
module: unexport find_module and module_mutex
drm: remove drm_fb_helper_modinit
powerpc/powernv: remove get_cxl_module
module: harden ELF info handling
module: Ignore _GLOBAL_OFFSET_TABLE_ when warning for undefined symbols
PF_IO_WORKER are kernel threads too, but they aren't PF_KTHREAD in the
sense that we don't assign ->set_child_tid with our own structure. Just
ensure that every arch sets up the PF_IO_WORKER threads like kthreads
in the arch implementation of copy_thread().
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The 'syscall' variables are not directly used in the commands.
Remove the $(srctree)/ prefix because we can rely on VPATH.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The rules in these Makefiles cannot detect the command line change
because the prerequisite 'FORCE' is missing.
Adding 'FORCE' will result in the headers being rebuilt every time
because the 'targets' additions are also wrong; the file paths in
'targets' must be relative to the current Makefile.
Fix all of them so the if_changed rules work correctly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
The "oprofile" user-space tools don't use the kernel OPROFILE support any more,
and haven't in a long time. User-space has been converted to the perf
interfaces.
The dcookies stuff is only used by the oprofile code. Now that oprofile's
support is getting removed from the kernel, there is no need for dcookies as
well.
Remove kernel's old oprofile and dcookies support.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=I2Ac
-----END PGP SIGNATURE-----
Merge tag 'oprofile-removal-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/linux
Pull oprofile and dcookies removal from Viresh Kumar:
"Remove oprofile and dcookies support
The 'oprofile' user-space tools don't use the kernel OPROFILE support
any more, and haven't in a long time. User-space has been converted to
the perf interfaces.
The dcookies stuff is only used by the oprofile code. Now that
oprofile's support is getting removed from the kernel, there is no
need for dcookies as well.
Remove kernel's old oprofile and dcookies support"
* tag 'oprofile-removal-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/linux:
fs: Remove dcookies support
drivers: Remove CONFIG_OPROFILE support
arch: xtensa: Remove CONFIG_OPROFILE support
arch: x86: Remove CONFIG_OPROFILE support
arch: sparc: Remove CONFIG_OPROFILE support
arch: sh: Remove CONFIG_OPROFILE support
arch: s390: Remove CONFIG_OPROFILE support
arch: powerpc: Remove oprofile
arch: powerpc: Stop building and using oprofile
arch: parisc: Remove CONFIG_OPROFILE support
arch: mips: Remove CONFIG_OPROFILE support
arch: microblaze: Remove CONFIG_OPROFILE support
arch: ia64: Remove rest of perfmon support
arch: ia64: Remove CONFIG_OPROFILE support
arch: hexagon: Don't select HAVE_OPROFILE
arch: arc: Remove CONFIG_OPROFILE support
arch: arm: Remove CONFIG_OPROFILE support
arch: alpha: Remove CONFIG_OPROFILE support
Merge in the recent paravirt changes to resolve conflicts caused
by objtool annotations.
Conflicts:
arch/x86/xen/xen-asm.S
Signed-off-by: Ingo Molnar <mingo@kernel.org>
To avoid include recursion hell move the do_softirq_own_stack() related
content into a generic asm header and include it from all places in arch/
which need the prototype.
This allows architectures to provide an inline implementation of
do_softirq_own_stack() without introducing a lot of #ifdeffery all over the
place.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210210002513.289960691@linutronix.de
To prepare for inlining do_softirq_own_stack() replace
__ARCH_HAS_DO_SOFTIRQ with a Kconfig switch and select it in the affected
architectures.
This allows in the next step to move the function prototype and the inline
stub into a seperate asm-generic header file which is required to avoid
include recursion.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210210002513.181713427@linutronix.de
EXPORT_UNUSED_SYMBOL* is not actually used anywhere. Remove the
unused functionality as we generally just remove unused code anyway.
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
The "oprofile" user-space tools don't use the kernel OPROFILE support
any more, and haven't in a long time. User-space has been converted to
the perf interfaces.
Remove the old oprofile's architecture specific support.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Robert Richter <rric@kernel.org>
Acked-by: William Cohen <wcohen@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
This implements the missing mount_setattr() syscall. While the new mount
api allows to change the properties of a superblock there is currently
no way to change the properties of a mount or a mount tree using file
descriptors which the new mount api is based on. In addition the old
mount api has the restriction that mount options cannot be applied
recursively. This hasn't changed since changing mount options on a
per-mount basis was implemented in [1] and has been a frequent request
not just for convenience but also for security reasons. The legacy
mount syscall is unable to accommodate this behavior without introducing
a whole new set of flags because MS_REC | MS_REMOUNT | MS_BIND |
MS_RDONLY | MS_NOEXEC | [...] only apply the mount option to the topmost
mount. Changing MS_REC to apply to the whole mount tree would mean
introducing a significant uapi change and would likely cause significant
regressions.
The new mount_setattr() syscall allows to recursively clear and set
mount options in one shot. Multiple calls to change mount options
requesting the same changes are idempotent:
int mount_setattr(int dfd, const char *path, unsigned flags,
struct mount_attr *uattr, size_t usize);
Flags to modify path resolution behavior are specified in the @flags
argument. Currently, AT_EMPTY_PATH, AT_RECURSIVE, AT_SYMLINK_NOFOLLOW,
and AT_NO_AUTOMOUNT are supported. If useful, additional lookup flags to
restrict path resolution as introduced with openat2() might be supported
in the future.
The mount_setattr() syscall can be expected to grow over time and is
designed with extensibility in mind. It follows the extensible syscall
pattern we have used with other syscalls such as openat2(), clone3(),
sched_{set,get}attr(), and others.
The set of mount options is passed in the uapi struct mount_attr which
currently has the following layout:
struct mount_attr {
__u64 attr_set;
__u64 attr_clr;
__u64 propagation;
__u64 userns_fd;
};
The @attr_set and @attr_clr members are used to clear and set mount
options. This way a user can e.g. request that a set of flags is to be
raised such as turning mounts readonly by raising MOUNT_ATTR_RDONLY in
@attr_set while at the same time requesting that another set of flags is
to be lowered such as removing noexec from a mount tree by specifying
MOUNT_ATTR_NOEXEC in @attr_clr.
Note, since the MOUNT_ATTR_<atime> values are an enum starting from 0,
not a bitmap, users wanting to transition to a different atime setting
cannot simply specify the atime setting in @attr_set, but must also
specify MOUNT_ATTR__ATIME in the @attr_clr field. So we ensure that
MOUNT_ATTR__ATIME can't be partially set in @attr_clr and that @attr_set
can't have any atime bits set if MOUNT_ATTR__ATIME isn't set in
@attr_clr.
The @propagation field lets callers specify the propagation type of a
mount tree. Propagation is a single property that has four different
settings and as such is not really a flag argument but an enum.
Specifically, it would be unclear what setting and clearing propagation
settings in combination would amount to. The legacy mount() syscall thus
forbids the combination of multiple propagation settings too. The goal
is to keep the semantics of mount propagation somewhat simple as they
are overly complex as it is.
The @userns_fd field lets user specify a user namespace whose idmapping
becomes the idmapping of the mount. This is implemented and explained in
detail in the next patch.
[1]: commit 2e4b7fcd92 ("[PATCH] r/o bind mounts: honor mount writer counts at remount")
Link: https://lore.kernel.org/r/20210121131959.646623-35-christian.brauner@ubuntu.com
Cc: David Howells <dhowells@redhat.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-api@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
The default by generic header is the same, hence drop unnecessary definition.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rich Felker <dalias@libc.org>
Remove CONFIG_IDE from defconfigs that did not actually select chipset
drivers, and switch ones that have libata drivers to libata.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rich Felker <dalias@libc.org>
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Rich Felker <dalias@libc.org>
When G2_DMA is enabled and SH_DMA is disabled, it results in the following
Kbuild warning:
WARNING: unmet direct dependencies detected for SH_DMA_API
Depends on [n]: SH_DMA [=n]
Selected by [y]:
- G2_DMA [=y] && SH_DREAMCAST [=y]
The reason is that G2_DMA selects SH_DMA_API without depending on or
selecting SH_DMA while SH_DMA_API depends on SH_DMA.
When G2_DMA was first introduced with commit 40f49e7ed7
("sh: dma: Make G2 DMA configurable."), this wasn't an issue since
SH_DMA_API didn't have such dependency, and this way was the only way to
enable it since SH_DMA_API was non-visible. However, later SH_DMA_API was
made visible and dependent on SH_DMA with commit d8902adcc1
("dmaengine: sh: Add Support SuperH DMA Engine driver").
Let G2_DMA depend on SH_DMA_API instead to avoid Kbuild issues.
Fixes: d8902adcc1 ("dmaengine: sh: Add Support SuperH DMA Engine driver")
Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Signed-off-by: Rich Felker <dalias@libc.org>
Make <asm-generic/local64.h> mandatory in include/asm-generic/Kbuild and
remove all arch/*/include/asm/local64.h arch-specific files since they
only #include <asm-generic/local64.h>.
This fixes build errors on arch/c6x/ and arch/nios2/ for
block/blk-iocost.c.
Build-tested on 21 of 25 arch-es. (tools problems on the others)
Yes, we could even rename <asm-generic/local64.h> to
<linux/local64.h> and change all #includes to use
<linux/local64.h> instead.
Link: https://lkml.kernel.org/r/20201227024446.17018-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ability to get struct clk pointers from a struct clk_hw so that clk providers
can consume the clks they provide, if they need to do something like that. This
has been a long missing part of the clk provider API that will help us move
away from exposing a struct clk pointer in the struct clk_hw. Tracepoints are
added for the clk_set_rate() "range" functions, similar to the tracepoints we
already have for clk_set_rate() and we added a column to debugfs to help
developers understand the hardware enable state of clks in case firmware or
bootloader state is different than what is expected. Overall the core changes
are mostly improving the clk driver writing experience.
At the driver level, we have the usual collection of driver updates and new
drivers for new SoCs. This time around the Qualcomm folks introduced a good
handful of clk drivers for various parts of three or four SoCs. The SiFive
folks added a new clk driver for their FU740 SoCs, coming in second on the
diffstat and then Atmel AT91 and Amlogic SoCs had lots of work done after that
for various new features. One last thing to note in the driver area is that the
i.MX driver has gained a new binding to support SCU clks after being on the
list for many months. It uses a two cell binding which is sort of rare in clk
DT bindings. Beyond that we have the usual set of driver fixes and tweaks that
come from more testing and finding out that some configuration was wrong or
that a driver could support being built as a module.
Core:
- Add some trace points for clk_set_rate() "range" functions
- Add hardware enable information to clk_summary debugfs
- Replace clk-provider.h with of_clk.h when possible
- Add devm variant of clk_notifier_register()
- Add clk_hw_get_clk() to generate a struct clk from a struct clk_hw
New Drivers:
- Bindings for Canaan K210 SoC clks
- Support for SiFive FU740 PRCI
- Camera clks on Qualcomm SC7180 SoCs
- GCC and RPMh clks on Qualcomm SDX55 SoCs
- RPMh clks on Qualcomm SM8350 SoCs
- LPASS clks on Qualcomm SM8250 SoCs
Updates:
- DVFS support for AT91 clk driver
- Update git repo branch for Renesas clock drivers
- Add camera (CSI) and video-in (VIN) clocks on Renesas R-Car V3U
- Add RPC (QSPI/HyperFLASH) clocks on Renesas RZ/G2M, RZ/G2N, and RZ/G2E
- Stop using __raw_*() I/O accessors in Renesas clk drivers
- One more conversion of DT bindings to json-schema
- Make i.MX clk-gate2 driver more flexible
- New two cell binding for i.MX SCU clks
- Drop of_match_ptr() in i.MX8 clk drivers
- Add arch dependencies for Rockchip clk drivers
- Fix i2s on Rockchip rk3066
- Add MIPI DSI clks on Amlogic axg and g12 SoCs
- Support modular builds of Amlogic clk drivers
- Fix an Amlogic Video PLL clock dependency
- Samsung Kconfig dependencies updates for better compile test coverage
- Refactoring of the Samsung PLL clocks driver
- Small Tegra driver cleanups
- Minor fixes to Ingenic and VC5 clk drivers
- Cleanup patches to remove unused variables and plug memory leaks
-----BEGIN PGP SIGNATURE-----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=Wt9O
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"The core framework got some nice improvements this time around. We
gained the ability to get struct clk pointers from a struct clk_hw so
that clk providers can consume the clks they provide, if they need to
do something like that. This has been a long missing part of the clk
provider API that will help us move away from exposing a struct clk
pointer in the struct clk_hw. Tracepoints are added for the
clk_set_rate() "range" functions, similar to the tracepoints we
already have for clk_set_rate() and we added a column to debugfs to
help developers understand the hardware enable state of clks in case
firmware or bootloader state is different than what is expected.
Overall the core changes are mostly improving the clk driver writing
experience.
At the driver level, we have the usual collection of driver updates
and new drivers for new SoCs. This time around the Qualcomm folks
introduced a good handful of clk drivers for various parts of three or
four SoCs. The SiFive folks added a new clk driver for their FU740
SoCs, coming in second on the diffstat and then Atmel AT91 and Amlogic
SoCs had lots of work done after that for various new features. One
last thing to note in the driver area is that the i.MX driver has
gained a new binding to support SCU clks after being on the list for
many months. It uses a two cell binding which is sort of rare in clk
DT bindings. Beyond that we have the usual set of driver fixes and
tweaks that come from more testing and finding out that some
configuration was wrong or that a driver could support being built as
a module.
Summary:
Core:
- Add some trace points for clk_set_rate() "range" functions
- Add hardware enable information to clk_summary debugfs
- Replace clk-provider.h with of_clk.h when possible
- Add devm variant of clk_notifier_register()
- Add clk_hw_get_clk() to generate a struct clk from a struct clk_hw
New Drivers:
- Bindings for Canaan K210 SoC clks
- Support for SiFive FU740 PRCI
- Camera clks on Qualcomm SC7180 SoCs
- GCC and RPMh clks on Qualcomm SDX55 SoCs
- RPMh clks on Qualcomm SM8350 SoCs
- LPASS clks on Qualcomm SM8250 SoCs
Updates:
- DVFS support for AT91 clk driver
- Update git repo branch for Renesas clock drivers
- Add camera (CSI) and video-in (VIN) clocks on Renesas R-Car V3U
- Add RPC (QSPI/HyperFLASH) clocks on Renesas RZ/G2M, RZ/G2N, and RZ/G2E
- Stop using __raw_*() I/O accessors in Renesas clk drivers
- One more conversion of DT bindings to json-schema
- Make i.MX clk-gate2 driver more flexible
- New two cell binding for i.MX SCU clks
- Drop of_match_ptr() in i.MX8 clk drivers
- Add arch dependencies for Rockchip clk drivers
- Fix i2s on Rockchip rk3066
- Add MIPI DSI clks on Amlogic axg and g12 SoCs
- Support modular builds of Amlogic clk drivers
- Fix an Amlogic Video PLL clock dependency
- Samsung Kconfig dependencies updates for better compile test coverage
- Refactoring of the Samsung PLL clocks driver
- Small Tegra driver cleanups
- Minor fixes to Ingenic and VC5 clk drivers
- Cleanup patches to remove unused variables and plug memory leaks"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (134 commits)
dt-binding: clock: Document canaan,k210-clk bindings
dt-bindings: Add Canaan vendor prefix
clk: vc5: Use "idt,voltage-microvolt" instead of "idt,voltage-microvolts"
clk: ingenic: Fix divider calculation with div tables
clk: sunxi-ng: Make sure divider tables have sentinel
clk: s2mps11: Fix a resource leak in error handling paths in the probe function
clk: mvebu: a3700: fix the XTAL MODE pin to MPP1_9
clk: si5351: Wait for bit clear after PLL reset
clk: at91: sam9x60: remove atmel,osc-bypass support
clk: at91: sama7g5: register cpu clock
clk: at91: clk-master: re-factor master clock
clk: at91: sama7g5: do not allow cpu pll to go higher than 1GHz
clk: at91: sama7g5: decrease lower limit for MCK0 rate
clk: at91: sama7g5: remove mck0 from parent list of other clocks
clk: at91: clk-sam9x60-pll: allow runtime changes for pll
clk: at91: sama7g5: add 5th divisor for mck0 layout and characteristics
clk: at91: clk-master: add 5th divisor for mck master
clk: at91: sama7g5: allow SYS and CPU PLLs to be exported and referenced in DT
dt-bindings: clock: at91: add sama7g5 pll defines
clk: at91: sama7g5: fix compilation error
...
Split off from prev patch in the series that implements the syscall.
Link: https://lkml.kernel.org/r/20201121144401.3727659-4-willemdebruijn.kernel@gmail.com
Signed-off-by: Willem de Bruijn <willemb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are a couple of subsystems maintained by other people that
merge their drivers through the SoC tree, those changes include:
- The SCMI firmware framework gains support for sensor notifications
and for controlling voltage domains.
- A large update for the Tegra memory controller driver, integrating
it better with the interconnect framework
- The memory controller subsystem gains support for Mediatek MT8192
- The reset controller framework gains support for sharing pulsed
resets
For Soc specific drivers in drivers/soc, the main changes are
- The Allwinner/sunxi MBUS gets a rework for the way it handles
dma_map_ops and offsets between physical and dma address spaces.
- An errata fix plus some cleanups for Freescale Layerscape SoCs
- A cleanup for renesas drivers regarding MMIO accesses.
- New SoC specific drivers for Mediatek MT8192 and MT8183 power domains
- New SoC specific drivers for Aspeed AST2600 LPC bus control
and SoC identification.
- Core Power Domain support for Qualcomm MSM8916, MSM8939, SDM660
and SDX55.
- A rework of the TI AM33xx 'genpd' power domain support to use
information from DT instead of platform data
- Support for TI AM64x SoCs
- Allow building some Amlogic drivers as modules instead of built-in
Finally, there are numerous cleanups and smaller bug fixes for
Mediatek, Tegra, Samsung, Qualcomm, TI OMAP, Amlogic, Rockchips,
Renesas, and Xilinx SoCs.
There is a trivial conflict in the cedrus driver, with two branches
adding the same CEDRUS_CAPABILITY_H265_DEC flag, and another trivial
remove/remove conflict in linux/dma-mapping.h.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=BjJf
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"There are a couple of subsystems maintained by other people that merge
their drivers through the SoC tree, those changes include:
- The SCMI firmware framework gains support for sensor notifications
and for controlling voltage domains.
- A large update for the Tegra memory controller driver, integrating
it better with the interconnect framework
- The memory controller subsystem gains support for Mediatek MT8192
- The reset controller framework gains support for sharing pulsed
resets
For Soc specific drivers in drivers/soc, the main changes are
- The Allwinner/sunxi MBUS gets a rework for the way it handles
dma_map_ops and offsets between physical and dma address spaces.
- An errata fix plus some cleanups for Freescale Layerscape SoCs
- A cleanup for renesas drivers regarding MMIO accesses.
- New SoC specific drivers for Mediatek MT8192 and MT8183 power
domains
- New SoC specific drivers for Aspeed AST2600 LPC bus control and SoC
identification.
- Core Power Domain support for Qualcomm MSM8916, MSM8939, SDM660 and
SDX55.
- A rework of the TI AM33xx 'genpd' power domain support to use
information from DT instead of platform data
- Support for TI AM64x SoCs
- Allow building some Amlogic drivers as modules instead of built-in
Finally, there are numerous cleanups and smaller bug fixes for
Mediatek, Tegra, Samsung, Qualcomm, TI OMAP, Amlogic, Rockchips,
Renesas, and Xilinx SoCs"
* tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (222 commits)
soc: mediatek: mmsys: Specify HAS_IOMEM dependency for MTK_MMSYS
firmware: xilinx: Properly align function parameter
firmware: xilinx: Add a blank line after function declaration
firmware: xilinx: Remove additional newline
firmware: xilinx: Fix kernel-doc warnings
firmware: xlnx-zynqmp: fix compilation warning
soc: xilinx: vcu: add missing register NUM_CORE
soc: xilinx: vcu: use vcu-settings syscon registers
dt-bindings: soc: xlnx: extract xlnx, vcu-settings to separate binding
soc: xilinx: vcu: drop useless success message
clk: samsung: mark PM functions as __maybe_unused
soc: samsung: exynos-chipid: initialize later - with arch_initcall
soc: samsung: exynos-chipid: order list of SoCs by name
memory: jz4780_nemc: Fix potential NULL dereference in jz4780_nemc_probe()
memory: ti-emif-sram: only build for ARMv7
memory: tegra30: Support interconnect framework
memory: tegra20: Support hardware versioning and clean up OPP table initialization
dt-bindings: memory: tegra20-emc: Document opp-supported-hw property
soc: rockchip: io-domain: Fix error return code in rockchip_iodomain_probe()
reset-controller: ti: force the write operation when assert or deassert
...
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl/YJxsQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpjpyEACBdW+YjenjTbkUPeEXzQgkBkTZUYw3g007
DPcUT1g8PQZXYXlQvBKCvGhhIr7/KVcjepKoowiNQfBNGcIPJTVopW58nzpqAfTQ
goI2WYGn5EKFFKBPvtH04cJD/Wo8muXdxynKtqyZbnGGgZjQxPrE259b8dpHjBSR
6L7HHkk0D1oU/5b6h6Ocpg9mc/0iIUCZylySAYY3eGO0JaVPJaXgZSJZYgHxCHll
Lb+/y/fXdtm/0PmQ3ko0ev54g3yEWqZIX0NsZW1asrButIy+KLzQ2Mz1xFLFDMag
prtIfwb8tzgc4dFPY090C/azjCh5CPpxqYS6FkRwS0p86n6OhkyXrqfily5Hs4/B
NC7CBPBSH/j+NKUK7CYZcpTzTpxPjUr9p0anUdlvMJz8FhTb/3YEEZ1UTeWOeHmk
Yo5SxnFghLeZZeZ1ok6rdymnVa7WEX12SCLGQX31BB2mld0tNbKb4b+FsBF6OUMk
IUaX6OjwDFVRaysC88BQ4hjcIP1HxsViG4/VZDX15gjAAH2Pvb+7tev+lcDcOhjz
TCD4GNFspTFzRhh9nT7oxQ679qCh9G9zHbzuIRewnrS6iqvo5SJQB3dR2yrWZRRH
ySkQFiHpYOlnLJYv0jg9COlGwo2FUdcvKhCvkjQKKBz48rzW/IC0LwKdRQWZDFk3
FKGzP/NBig==
=cadT
-----END PGP SIGNATURE-----
Merge tag 'tif-task_work.arch-2020-12-14' of git://git.kernel.dk/linux-block
Pull TIF_NOTIFY_SIGNAL updates from Jens Axboe:
"This sits on top of of the core entry/exit and x86 entry branch from
the tip tree, which contains the generic and x86 parts of this work.
Here we convert the rest of the archs to support TIF_NOTIFY_SIGNAL.
With that done, we can get rid of JOBCTL_TASK_WORK from task_work and
signal.c, and also remove a deadlock work-around in io_uring around
knowing that signal based task_work waking is invoked with the sighand
wait queue head lock.
The motivation for this work is to decouple signal notify based
task_work, of which io_uring is a heavy user of, from sighand. The
sighand lock becomes a huge contention point, particularly for
threaded workloads where it's shared between threads. Even outside of
threaded applications it's slower than it needs to be.
Roman Gershman <romger@amazon.com> reported that his networked
workload dropped from 1.6M QPS at 80% CPU to 1.0M QPS at 100% CPU
after io_uring was changed to use TIF_NOTIFY_SIGNAL. The time was all
spent hammering on the sighand lock, showing 57% of the CPU time there
[1].
There are further cleanups possible on top of this. One example is
TIF_PATCH_PENDING, where a patch already exists to use
TIF_NOTIFY_SIGNAL instead. Hopefully this will also lead to more
consolidation, but the work stands on its own as well"
[1] https://github.com/axboe/liburing/issues/215
* tag 'tif-task_work.arch-2020-12-14' of git://git.kernel.dk/linux-block: (28 commits)
io_uring: remove 'twa_signal_ok' deadlock work-around
kernel: remove checking for TIF_NOTIFY_SIGNAL
signal: kill JOBCTL_TASK_WORK
io_uring: JOBCTL_TASK_WORK is no longer used by task_work
task_work: remove legacy TWA_SIGNAL path
sparc: add support for TIF_NOTIFY_SIGNAL
riscv: add support for TIF_NOTIFY_SIGNAL
nds32: add support for TIF_NOTIFY_SIGNAL
ia64: add support for TIF_NOTIFY_SIGNAL
h8300: add support for TIF_NOTIFY_SIGNAL
c6x: add support for TIF_NOTIFY_SIGNAL
alpha: add support for TIF_NOTIFY_SIGNAL
xtensa: add support for TIF_NOTIFY_SIGNAL
arm: add support for TIF_NOTIFY_SIGNAL
microblaze: add support for TIF_NOTIFY_SIGNAL
hexagon: add support for TIF_NOTIFY_SIGNAL
csky: add support for TIF_NOTIFY_SIGNAL
openrisc: add support for TIF_NOTIFY_SIGNAL
sh: add support for TIF_NOTIFY_SIGNAL
um: add support for TIF_NOTIFY_SIGNAL
...
This cleans up two ancient timer features that were never completed in
the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET.
There was only one user left for the ARCH_USES_GETTIMEOFFSET variant
of clocksource implementations, the ARM EBSA110 platform. Rather than
changing to use modern timekeeping, we remove the platform entirely as
Russell no longer uses his machine and nobody else seems to have one
any more.
The conditional code for using arch_gettimeoffset() is removed as
a result.
For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms
not using clockevent drivers: parisc, ia64, most of m68k, and one
Arm platform. These all do timer ticks slighly differently, and this
gets cleaned up to the point they at least all call the same helper
function. Instead of most platforms using 'select GENERIC_CLOCKEVENTS'
in Kconfig, the polarity is now reversed, with the few remaining ones
selecting LEGACY_TIMER_TICK instead.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=QpNs
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic cross-architecture timer cleanup from Arnd Bergmann:
"This cleans up two ancient timer features that were never completed in
the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET.
There was only one user left for the ARCH_USES_GETTIMEOFFSET variant
of clocksource implementations, the ARM EBSA110 platform. Rather than
changing to use modern timekeeping, we remove the platform entirely as
Russell no longer uses his machine and nobody else seems to have one
any more.
The conditional code for using arch_gettimeoffset() is removed as a
result.
For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms
not using clockevent drivers: parisc, ia64, most of m68k, and one Arm
platform. These all do timer ticks slighly differently, and this gets
cleaned up to the point they at least all call the same helper
function.
Instead of most platforms using 'select GENERIC_CLOCKEVENTS' in
Kconfig, the polarity is now reversed, with the few remaining ones
selecting LEGACY_TIMER_TICK instead"
* tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
timekeeping: default GENERIC_CLOCKEVENTS to enabled
timekeeping: remove xtime_update
m68k: remove timer_interrupt() function
m68k: change remaining timers to legacy_timer_tick
m68k: m68328: use legacy_timer_tick()
m68k: sun3/sun3c: use legacy_timer_tick
m68k: split heartbeat out of timer function
m68k: coldfire: use legacy_timer_tick()
parisc: use legacy_timer_tick
ARM: rpc: use legacy_timer_tick
ia64: convert to legacy_timer_tick
timekeeping: add CONFIG_LEGACY_TIMER_TICK
timekeeping: remove arch_gettimeoffset
net: remove am79c961a driver
ARM: remove ebsa110 platform
This is a cleanup series from Nicholas Piggin, preparing for
later changes. The asm/mmu_context.h header are generalized
and common code moved to asm-gneneric/mmu_context.h.
This saves a bit of code and makes it easier to change in
the future.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=NpMX
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-mmu-context-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic mmu-context cleanup from Arnd Bergmann:
"This is a cleanup series from Nicholas Piggin, preparing for later
changes. The asm/mmu_context.h header are generalized and common code
moved to asm-gneneric/mmu_context.h.
This saves a bit of code and makes it easier to change in the future"
* tag 'asm-generic-mmu-context-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (25 commits)
h8300: Fix generic mmu_context build
m68k: mmu_context: Fix Sun-3 build
xtensa: use asm-generic/mmu_context.h for no-op implementations
x86: use asm-generic/mmu_context.h for no-op implementations
um: use asm-generic/mmu_context.h for no-op implementations
sparc: use asm-generic/mmu_context.h for no-op implementations
sh: use asm-generic/mmu_context.h for no-op implementations
s390: use asm-generic/mmu_context.h for no-op implementations
riscv: use asm-generic/mmu_context.h for no-op implementations
powerpc: use asm-generic/mmu_context.h for no-op implementations
parisc: use asm-generic/mmu_context.h for no-op implementations
openrisc: use asm-generic/mmu_context.h for no-op implementations
nios2: use asm-generic/mmu_context.h for no-op implementations
nds32: use asm-generic/mmu_context.h for no-op implementations
mips: use asm-generic/mmu_context.h for no-op implementations
microblaze: use asm-generic/mmu_context.h for no-op implementations
m68k: use asm-generic/mmu_context.h for no-op implementations
ia64: use asm-generic/mmu_context.h for no-op implementations
hexagon: use asm-generic/mmu_context.h for no-op implementations
csky: use asm-generic/mmu_context.h for no-op implementations
...
Core:
- Consolidation and robustness changes for irq time accounting
- Cleanup and consolidation of irq stats
- Remove the fasteoi IPI flow which has been proved useless
- Provide an interface for converting legacy interrupt mechanism into
irqdomains
Drivers:
The rare event of not having completely new chip driver code, just new
DT bindings and extensions of existing drivers to accomodate new
variants!
- Preliminary support for managed interrupts on platform devices
- Correctly identify allocation of MSIs proxyied by another device
- Generalise the Ocelot support to new SoCs
- Improve GICv4.1 vcpu entry, matching the corresponding KVM optimisation
- Work around spurious interrupts on Qualcomm PDC
- Random fixes and cleanups
Thanks,
tglx
-----BEGIN PGP SIGNATURE-----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=iytv
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2020-12-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Generic interrupt and irqchips subsystem updates. Unusually, there is
not a single completely new irq chip driver, just new DT bindings and
extensions of existing drivers to accomodate new variants!
Core:
- Consolidation and robustness changes for irq time accounting
- Cleanup and consolidation of irq stats
- Remove the fasteoi IPI flow which has been proved useless
- Provide an interface for converting legacy interrupt mechanism into
irqdomains
Drivers:
- Preliminary support for managed interrupts on platform devices
- Correctly identify allocation of MSIs proxyied by another device
- Generalise the Ocelot support to new SoCs
- Improve GICv4.1 vcpu entry, matching the corresponding KVM
optimisation
- Work around spurious interrupts on Qualcomm PDC
- Random fixes and cleanups"
* tag 'irq-core-2020-12-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
irqchip/qcom-pdc: Fix phantom irq when changing between rising/falling
driver core: platform: Add devm_platform_get_irqs_affinity()
ACPI: Drop acpi_dev_irqresource_disabled()
resource: Add irqresource_disabled()
genirq/affinity: Add irq_update_affinity_desc()
irqchip/gic-v3-its: Flag device allocation as proxied if behind a PCI bridge
irqchip/gic-v3-its: Tag ITS device as shared if allocating for a proxy device
platform-msi: Track shared domain allocation
irqchip/ti-sci-intr: Fix freeing of irqs
irqchip/ti-sci-inta: Fix printing of inta id on probe success
drivers/irqchip: Remove EZChip NPS interrupt controller
Revert "genirq: Add fasteoi IPI flow"
irqchip/hip04: Make IPIs use handle_percpu_devid_irq()
irqchip/bcm2836: Make IPIs use handle_percpu_devid_irq()
irqchip/armada-370-xp: Make IPIs use handle_percpu_devid_irq()
irqchip/gic, gic-v3: Make SGIs use handle_percpu_devid_irq()
irqchip/ocelot: Add support for Jaguar2 platforms
irqchip/ocelot: Add support for Serval platforms
irqchip/ocelot: Add support for Luton platforms
irqchip/ocelot: prepare to support more SoC
...
- Preliminary support for managed interrupts on platform devices
- Correctly identify allocation of MSIs proxyied by another device
- Remove the fasteoi IPI flow which has been proved useless
- Generalise the Ocelot support to new SoCs
- Improve GICv4.1 vcpu entry, matching the corresponding KVM optimisation
- Work around spurious interrupts on Qualcomm PDC
- Random fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=7Z24
-----END PGP SIGNATURE-----
Merge tag 'irqchip-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates for 5.11 from Marc Zyngier:
- Preliminary support for managed interrupts on platform devices
- Correctly identify allocation of MSIs proxyied by another device
- Remove the fasteoi IPI flow which has been proved useless
- Generalise the Ocelot support to new SoCs
- Improve GICv4.1 vcpu entry, matching the corresponding KVM optimisation
- Work around spurious interrupts on Qualcomm PDC
- Random fixes and cleanups
Link: https://lore.kernel.org/r/20201212135626.1479884-1-maz@kernel.org
- Consolidate all kmap_atomic() internals into a generic implementation
which builds the base for the kmap_local() API and make the
kmap_atomic() interface wrappers which handle the disabling/enabling of
preemption and pagefaults.
- Switch the storage from per-CPU to per task and provide scheduler
support for clearing mapping when scheduling out and restoring them
when scheduling back in.
- Merge the migrate_disable/enable() code, which is also part of the
scheduler pull request. This was required to make the kmap_local()
interface available which does not disable preemption when a mapping
is established. It has to disable migration instead to guarantee that
the virtual address of the mapped slot is the same accross preemption.
- Provide better debug facilities: guard pages and enforced utilization
of the mapping mechanics on 64bit systems when the architecture allows
it.
- Provide the new kmap_local() API which can now be used to cleanup the
kmap_atomic() usage sites all over the place. Most of the usage sites
do not require the implicit disabling of preemption and pagefaults so
the penalty on 64bit and 32bit non-highmem systems is removed and quite
some of the code can be simplified. A wholesale conversion is not
possible because some usage depends on the implicit side effects and
some need to be cleaned up because they work around these side effects.
The migrate disable side effect is only effective on highmem systems
and when enforced debugging is enabled. On 64bit and 32bit non-highmem
systems the overhead is completely avoided.
-----BEGIN PGP SIGNATURE-----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=n71I
-----END PGP SIGNATURE-----
Merge tag 'core-mm-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull kmap updates from Thomas Gleixner:
"The new preemtible kmap_local() implementation:
- Consolidate all kmap_atomic() internals into a generic
implementation which builds the base for the kmap_local() API and
make the kmap_atomic() interface wrappers which handle the
disabling/enabling of preemption and pagefaults.
- Switch the storage from per-CPU to per task and provide scheduler
support for clearing mapping when scheduling out and restoring them
when scheduling back in.
- Merge the migrate_disable/enable() code, which is also part of the
scheduler pull request. This was required to make the kmap_local()
interface available which does not disable preemption when a
mapping is established. It has to disable migration instead to
guarantee that the virtual address of the mapped slot is the same
across preemption.
- Provide better debug facilities: guard pages and enforced
utilization of the mapping mechanics on 64bit systems when the
architecture allows it.
- Provide the new kmap_local() API which can now be used to cleanup
the kmap_atomic() usage sites all over the place. Most of the usage
sites do not require the implicit disabling of preemption and
pagefaults so the penalty on 64bit and 32bit non-highmem systems is
removed and quite some of the code can be simplified. A wholesale
conversion is not possible because some usage depends on the
implicit side effects and some need to be cleaned up because they
work around these side effects.
The migrate disable side effect is only effective on highmem
systems and when enforced debugging is enabled. On 64bit and 32bit
non-highmem systems the overhead is completely avoided"
* tag 'core-mm-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
ARM: highmem: Fix cache_is_vivt() reference
x86/crashdump/32: Simplify copy_oldmem_page()
io-mapping: Provide iomap_local variant
mm/highmem: Provide kmap_local*
sched: highmem: Store local kmaps in task struct
x86: Support kmap_local() forced debugging
mm/highmem: Provide CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP
mm/highmem: Provide and use CONFIG_DEBUG_KMAP_LOCAL
microblaze/mm/highmem: Add dropped #ifdef back
xtensa/mm/highmem: Make generic kmap_atomic() work correctly
mm/highmem: Take kmap_high_get() properly into account
highmem: High implementation details and document API
Documentation/io-mapping: Remove outdated blurb
io-mapping: Cleanup atomic iomap
mm/highmem: Remove the old kmap_atomic cruft
highmem: Get rid of kmap_types.h
xtensa/mm/highmem: Switch to generic kmap atomic
sparc/mm/highmem: Switch to generic kmap atomic
powerpc/mm/highmem: Switch to generic kmap atomic
nds32/mm/highmem: Switch to generic kmap atomic
...
The SuperH/J2 DT platform code is not a clock provider, and just needs
to call of_clk_init().
Hence it can include <linux/of_clk.h> instead of <linux/clk-provider.h>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20201110155029.3286090-1-geert+renesas@glider.be
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
We call arch_cpu_idle() with RCU disabled, but then use
local_irq_{en,dis}able(), which invokes tracing, which relies on RCU.
Switch all arch_cpu_idle() implementations to use
raw_local_irq_{en,dis}able() and carefully manage the
lockdep,rcu,tracing state like we do in entry.
(XXX: we really should change arch_cpu_idle() to not return with
interrupts enabled)
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lkml.kernel.org/r/20201120114925.594122626@infradead.org
SH can now use the generic irq_cpustat_t. Define ack_bad_irq so the generic
header does not emit the generic version of it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20201113141733.625146223@linutronix.de
nmi_count() is a historical leftover and SH is the only user. Replace it
with regular per cpu accessors.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20201113141732.844232404@linutronix.de
Drop the dma_direct_set_offset export and move the declaration to
dma-map-ops.h now that the Allwinner drivers have stopped calling it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
For whatever reasons SH has highmem bits all over the place but does
not enable it via Kconfig. Remove the bitrot.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/r/20201103095856.979798613@linutronix.de
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Almost all machines use GENERIC_CLOCKEVENTS, so it feels wrong to
require each one to select that symbol manually.
Instead, enable it whenever CONFIG_LEGACY_TIMER_TICK is disabled as
a simplification. It should be possible to select both
GENERIC_CLOCKEVENTS and LEGACY_TIMER_TICK from an architecture now
and decide at runtime between the two.
For the clockevents arch-support.txt file, this means that additional
architectures are marked as TODO when they have at least one machine
that still uses LEGACY_TIMER_TICK, rather than being marked 'ok' when
at least one machine has been converted. This means that both m68k and
arm (for riscpc) revert to TODO.
At this point, we could just always enable CONFIG_GENERIC_CLOCKEVENTS
rather than leaving it off when not needed. I built an m68k
defconfig kernel (using gcc-10.1.0) and found that this would add
around 5.5KB in kernel image size:
text data bss dec hex filename
3861936 1092236 196656 5150828 4e986c obj-m68k/vmlinux-no-clockevent
3866201 1093832 196184 5156217 4ead79 obj-m68k/vmlinux-clockevent
On Arm (MACH_RPC), that difference appears to be twice as large,
around 11KB on top of an 6MB vmlinux.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Many of these are no-ops on many architectures, so extend mmu_context.h
to cover MMU and NOMMU, and split the NOMMU bits out to nommu_context.h
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: linux-arch@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use a more generic form for __section that requires quotes to avoid
complications with clang and gcc differences.
Remove the quote operator # from compiler_attributes.h __section macro.
Convert all unquoted __section(foo) uses to quoted __section("foo").
Also convert __attribute__((section("foo"))) uses to __section("foo")
even if the __attribute__ has multiple list entry forms.
Conversion done using the script at:
https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=aVWo
-----END PGP SIGNATURE-----
Merge tag 'arch-cleanup-2020-10-22' of git://git.kernel.dk/linux-block
Pull arch task_work cleanups from Jens Axboe:
"Two cleanups that don't fit other categories:
- Finally get the task_work_add() cleanup done properly, so we don't
have random 0/1/false/true/TWA_SIGNAL confusing use cases. Updates
all callers, and also fixes up the documentation for
task_work_add().
- While working on some TIF related changes for 5.11, this
TIF_NOTIFY_RESUME cleanup fell out of that. Remove some arch
duplication for how that is handled"
* tag 'arch-cleanup-2020-10-22' of git://git.kernel.dk/linux-block:
task_work: cleanup notification modes
tracehook: clear TIF_NOTIFY_RESUME in tracehook_notify_resume()
Pull initial set_fs() removal from Al Viro:
"Christoph's set_fs base series + fixups"
* 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: Allow a NULL pos pointer to __kernel_read
fs: Allow a NULL pos pointer to __kernel_write
powerpc: remove address space overrides using set_fs()
powerpc: use non-set_fs based maccess routines
x86: remove address space overrides using set_fs()
x86: make TASK_SIZE_MAX usable from assembly code
x86: move PAGE_OFFSET, TASK_SIZE & friends to page_{32,64}_types.h
lkdtm: remove set_fs-based tests
test_bitmap: remove user bitmap tests
uaccess: add infrastructure for kernel builds with set_fs()
fs: don't allow splice read/write without explicit ops
fs: don't allow kernel reads and writes without iter ops
sysctl: Convert to iter interfaces
proc: add a read_iter method to proc proc_ops
proc: cleanup the compat vs no compat file ops
proc: remove a level of indentation in proc_get_inode
There is usecase that System Management Software(SMS) want to give a
memory hint like MADV_[COLD|PAGEEOUT] to other processes and in the
case of Android, it is the ActivityManagerService.
The information required to make the reclaim decision is not known to the
app. Instead, it is known to the centralized userspace
daemon(ActivityManagerService), and that daemon must be able to initiate
reclaim on its own without any app involvement.
To solve the issue, this patch introduces a new syscall
process_madvise(2). It uses pidfd of an external process to give the
hint. It also supports vector address range because Android app has
thousands of vmas due to zygote so it's totally waste of CPU and power if
we should call the syscall one by one for each vma.(With testing 2000-vma
syscall vs 1-vector syscall, it showed 15% performance improvement. I
think it would be bigger in real practice because the testing ran very
cache friendly environment).
Another potential use case for the vector range is to amortize the cost
ofTLB shootdowns for multiple ranges when using MADV_DONTNEED; this could
benefit users like TCP receive zerocopy and malloc implementations. In
future, we could find more usecases for other advises so let's make it
happens as API since we introduce a new syscall at this moment. With
that, existing madvise(2) user could replace it with process_madvise(2)
with their own pid if they want to have batch address ranges support
feature.
ince it could affect other process's address range, only privileged
process(PTRACE_MODE_ATTACH_FSCREDS) or something else(e.g., being the same
UID) gives it the right to ptrace the process could use it successfully.
The flag argument is reserved for future use if we need to extend the API.
I think supporting all hints madvise has/will supported/support to
process_madvise is rather risky. Because we are not sure all hints make
sense from external process and implementation for the hint may rely on
the caller being in the current context so it could be error-prone. Thus,
I just limited hints as MADV_[COLD|PAGEOUT] in this patch.
If someone want to add other hints, we could hear the usecase and review
it for each hint. It's safer for maintenance rather than introducing a
buggy syscall but hard to fix it later.
So finally, the API is as follows,
ssize_t process_madvise(int pidfd, const struct iovec *iovec,
unsigned long vlen, int advice, unsigned int flags);
DESCRIPTION
The process_madvise() system call is used to give advice or directions
to the kernel about the address ranges from external process as well as
local process. It provides the advice to address ranges of process
described by iovec and vlen. The goal of such advice is to improve
system or application performance.
The pidfd selects the process referred to by the PID file descriptor
specified in pidfd. (See pidofd_open(2) for further information)
The pointer iovec points to an array of iovec structures, defined in
<sys/uio.h> as:
struct iovec {
void *iov_base; /* starting address */
size_t iov_len; /* number of bytes to be advised */
};
The iovec describes address ranges beginning at address(iov_base)
and with size length of bytes(iov_len).
The vlen represents the number of elements in iovec.
The advice is indicated in the advice argument, which is one of the
following at this moment if the target process specified by pidfd is
external.
MADV_COLD
MADV_PAGEOUT
Permission to provide a hint to external process is governed by a
ptrace access mode PTRACE_MODE_ATTACH_FSCREDS check; see ptrace(2).
The process_madvise supports every advice madvise(2) has if target
process is in same thread group with calling process so user could
use process_madvise(2) to extend existing madvise(2) to support
vector address ranges.
RETURN VALUE
On success, process_madvise() returns the number of bytes advised.
This return value may be less than the total number of requested
bytes, if an error occurred. The caller should check return value
to determine whether a partial advice occurred.
FAQ:
Q.1 - Why does any external entity have better knowledge?
Quote from Sandeep
"For Android, every application (including the special SystemServer)
are forked from Zygote. The reason of course is to share as many
libraries and classes between the two as possible to benefit from the
preloading during boot.
After applications start, (almost) all of the APIs end up calling into
this SystemServer process over IPC (binder) and back to the
application.
In a fully running system, the SystemServer monitors every single
process periodically to calculate their PSS / RSS and also decides
which process is "important" to the user for interactivity.
So, because of how these processes start _and_ the fact that the
SystemServer is looping to monitor each process, it does tend to *know*
which address range of the application is not used / useful.
Besides, we can never rely on applications to clean things up
themselves. We've had the "hey app1, the system is low on memory,
please trim your memory usage down" notifications for a long time[1].
They rely on applications honoring the broadcasts and very few do.
So, if we want to avoid the inevitable killing of the application and
restarting it, some way to be able to tell the OS about unimportant
memory in these applications will be useful.
- ssp
Q.2 - How to guarantee the race(i.e., object validation) between when
giving a hint from an external process and get the hint from the target
process?
process_madvise operates on the target process's address space as it
exists at the instant that process_madvise is called. If the space
target process can run between the time the process_madvise process
inspects the target process address space and the time that
process_madvise is actually called, process_madvise may operate on
memory regions that the calling process does not expect. It's the
responsibility of the process calling process_madvise to close this
race condition. For example, the calling process can suspend the
target process with ptrace, SIGSTOP, or the freezer cgroup so that it
doesn't have an opportunity to change its own address space before
process_madvise is called. Another option is to operate on memory
regions that the caller knows a priori will be unchanged in the target
process. Yet another option is to accept the race for certain
process_madvise calls after reasoning that mistargeting will do no
harm. The suggested API itself does not provide synchronization. It
also apply other APIs like move_pages, process_vm_write.
The race isn't really a problem though. Why is it so wrong to require
that callers do their own synchronization in some manner? Nobody
objects to write(2) merely because it's possible for two processes to
open the same file and clobber each other's writes --- instead, we tell
people to use flock or something. Think about mmap. It never
guarantees newly allocated address space is still valid when the user
tries to access it because other threads could unmap the memory right
before. That's where we need synchronization by using other API or
design from userside. It shouldn't be part of API itself. If someone
needs more fine-grained synchronization rather than process level,
there were two ideas suggested - cookie[2] and anon-fd[3]. Both are
applicable via using last reserved argument of the API but I don't
think it's necessary right now since we have already ways to prevent
the race so don't want to add additional complexity with more
fine-grained optimization model.
To make the API extend, it reserved an unsigned long as last argument
so we could support it in future if someone really needs it.
Q.3 - Why doesn't ptrace work?
Injecting an madvise in the target process using ptrace would not work
for us because such injected madvise would have to be executed by the
target process, which means that process would have to be runnable and
that creates the risk of the abovementioned race and hinting a wrong
VMA. Furthermore, we want to act the hint in caller's context, not the
callee's, because the callee is usually limited in cpuset/cgroups or
even freezed state so they can't act by themselves quick enough, which
causes more thrashing/kill. It doesn't work if the target process are
ptraced(e.g., strace, debugger, minidump) because a process can have at
most one ptracer.
[1] https://developer.android.com/topic/performance/memory"
[2] process_getinfo for getting the cookie which is updated whenever
vma of process address layout are changed - Daniel Colascione -
https://lore.kernel.org/lkml/20190520035254.57579-1-minchan@kernel.org/T/#m7694416fd179b2066a2c62b5b139b14e3894e224
[3] anonymous fd which is used for the object(i.e., address range)
validation - Michal Hocko -
https://lore.kernel.org/lkml/20200120112722.GY18451@dhcp22.suse.cz/
[minchan@kernel.org: fix process_madvise build break for arm64]
Link: http://lkml.kernel.org/r/20200303145756.GA219683@google.com
[minchan@kernel.org: fix build error for mips of process_madvise]
Link: http://lkml.kernel.org/r/20200508052517.GA197378@google.com
[akpm@linux-foundation.org: fix patch ordering issue]
[akpm@linux-foundation.org: fix arm64 whoops]
[minchan@kernel.org: make process_madvise() vlen arg have type size_t, per Florian]
[akpm@linux-foundation.org: fix i386 build]
[sfr@canb.auug.org.au: fix syscall numbering]
Link: https://lkml.kernel.org/r/20200905142639.49fc3f1a@canb.auug.org.au
[sfr@canb.auug.org.au: madvise.c needs compat.h]
Link: https://lkml.kernel.org/r/20200908204547.285646b4@canb.auug.org.au
[minchan@kernel.org: fix mips build]
Link: https://lkml.kernel.org/r/20200909173655.GC2435453@google.com
[yuehaibing@huawei.com: remove duplicate header which is included twice]
Link: https://lkml.kernel.org/r/20200915121550.30584-1-yuehaibing@huawei.com
[minchan@kernel.org: do not use helper functions for process_madvise]
Link: https://lkml.kernel.org/r/20200921175539.GB387368@google.com
[akpm@linux-foundation.org: pidfd_get_pid() gained an argument]
[sfr@canb.auug.org.au: fix up for "iov_iter: transparently handle compat iovecs in import_iovec"]
Link: https://lkml.kernel.org/r/20200928212542.468e1fef@canb.auug.org.au
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Christian Brauner <christian@brauner.io>
Cc: Daniel Colascione <dancol@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Dias <joaodias@google.com>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oleksandr Natalenko <oleksandr@redhat.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: SeongJae Park <sj38.park@gmail.com>
Cc: SeongJae Park <sjpark@amazon.de>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Sonny Rao <sonnyrao@google.com>
Cc: Tim Murray <timmurray@google.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Florian Weimer <fw@deneb.enyo.de>
Cc: <linux-man@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200302193630.68771-3-minchan@kernel.org
Link: http://lkml.kernel.org/r/20200508183320.GA125527@google.com
Link: http://lkml.kernel.org/r/20200622192900.22757-4-minchan@kernel.org
Link: https://lkml.kernel.org/r/20200901000633.1920247-4-minchan@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All the callers currently do this, clean it up and move the clearing
into tracehook_notify_resume() instead.
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- rework the non-coherent DMA allocator
- move private definitions out of <linux/dma-mapping.h>
- lower CMA_ALIGNMENT (Paul Cercueil)
- remove the omap1 dma address translation in favor of the common
code
- make dma-direct aware of multiple dma offset ranges (Jim Quinlan)
- support per-node DMA CMA areas (Barry Song)
- increase the default seg boundary limit (Nicolin Chen)
- misc fixes (Robin Murphy, Thomas Tai, Xu Wang)
- various cleanups
-----BEGIN PGP SIGNATURE-----
iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAl+IiPwLHGhjaEBsc3Qu
ZGUACgkQD55TZVIEUYPKEQ//TM8vxjucnRl/pklpMin49dJorwiVvROLhQqLmdxw
286ZKpVzYYAPc7LnNqwIBugnFZiXuHu8xPKQkIiOa2OtNDTwhKNoBxOAmOJaV6DD
8JfEtZYeX5mKJ/Nqd2iSkIqOvCwZ9Wzii+aytJ2U88wezQr1fnyF4X49MegETEey
FHWreSaRWZKa0MMRu9AQ0QxmoNTHAQUNaPc0PeqEtPULybfkGOGw4/ghSB7WcKrA
gtKTuooNOSpVEHkTas2TMpcBp6lxtOjFqKzVN0ml+/nqq5NeTSDx91VOCX/6Cj76
mXIg+s7fbACTk/BmkkwAkd0QEw4fo4tyD6Bep/5QNhvEoAriTuSRbhvLdOwFz0EF
vhkF0Rer6umdhSK7nPd7SBqn8kAnP4vBbdmB68+nc3lmkqysLyE4VkgkdH/IYYQI
6TJ0oilXWFmU6DT5Rm4FBqCvfcEfU2dUIHJr5wZHqrF2kLzoZ+mpg42fADoG4GuI
D/oOsz7soeaRe3eYfWybC0omGR6YYPozZJ9lsfftcElmwSsFrmPsbO1DM5IBkj1B
gItmEbOB9ZK3RhIK55T/3u1UWY3Uc/RVr+kchWvADGrWnRQnW0kxYIqDgiOytLFi
JZNH8uHpJIwzoJAv6XXSPyEUBwXTG+zK37Ce769HGbUEaUrE71MxBbQAQsK8mDpg
7fM=
=Bkf/
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- rework the non-coherent DMA allocator
- move private definitions out of <linux/dma-mapping.h>
- lower CMA_ALIGNMENT (Paul Cercueil)
- remove the omap1 dma address translation in favor of the common code
- make dma-direct aware of multiple dma offset ranges (Jim Quinlan)
- support per-node DMA CMA areas (Barry Song)
- increase the default seg boundary limit (Nicolin Chen)
- misc fixes (Robin Murphy, Thomas Tai, Xu Wang)
- various cleanups
* tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits)
ARM/ixp4xx: add a missing include of dma-map-ops.h
dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling
dma-direct: factor out a dma_direct_alloc_from_pool helper
dma-direct check for highmem pages in dma_direct_alloc_pages
dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h>
dma-mapping: move large parts of <linux/dma-direct.h> to kernel/dma
dma-mapping: move dma-debug.h to kernel/dma/
dma-mapping: remove <asm/dma-contiguous.h>
dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h>
dma-contiguous: remove dma_contiguous_set_default
dma-contiguous: remove dev_set_cma_area
dma-contiguous: remove dma_declare_contiguous
dma-mapping: split <linux/dma-mapping.h>
cma: decrease CMA_ALIGNMENT lower limit to 2
firewire-ohci: use dma_alloc_pages
dma-iommu: implement ->alloc_noncoherent
dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods
dma-mapping: add a new dma_alloc_pages API
dma-mapping: remove dma_cache_sync
53c700: convert to dma_alloc_noncoherent
...
Merge misc updates from Andrew Morton:
"181 patches.
Subsystems affected by this patch series: kbuild, scripts, ntfs,
ocfs2, vfs, mm (slab, slub, kmemleak, dax, debug, pagecache, fadvise,
gup, swap, memremap, memcg, selftests, pagemap, mincore, hmm, dma,
memory-failure, vmallo and migration)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (181 commits)
mm/migrate: remove obsolete comment about device public
mm/migrate: remove cpages-- in migrate_vma_finalize()
mm, oom_adj: don't loop through tasks in __set_oom_adj when not necessary
memblock: use separate iterators for memory and reserved regions
memblock: implement for_each_reserved_mem_region() using __next_mem_region()
memblock: remove unused memblock_mem_size()
x86/setup: simplify reserve_crashkernel()
x86/setup: simplify initrd relocation and reservation
arch, drivers: replace for_each_membock() with for_each_mem_range()
arch, mm: replace for_each_memblock() with for_each_mem_pfn_range()
memblock: reduce number of parameters in for_each_mem_range()
memblock: make memblock_debug and related functionality private
memblock: make for_each_memblock_type() iterator private
mircoblaze: drop unneeded NUMA and sparsemem initializations
riscv: drop unneeded node initialization
h8300, nds32, openrisc: simplify detection of memory extents
arm64: numa: simplify dummy_numa_init()
arm, xtensa: simplify initialization of high memory pages
dma-contiguous: simplify cma_early_percent_memory()
KVM: PPC: Book3S HV: simplify kvm_cma_reserve()
...
There are several occurrences of the following pattern:
for_each_memblock(memory, reg) {
start_pfn = memblock_region_memory_base_pfn(reg);
end_pfn = memblock_region_memory_end_pfn(reg);
/* do something with start_pfn and end_pfn */
}
Rather than iterate over all memblock.memory regions and each time query
for their start and end PFNs, use for_each_mem_pfn_range() iterator to get
simpler and clearer code.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> [.clang-format]
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-12-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- heavily refactor seccomp selftests (and clone3 selftests dependency) to
fix powerpc (Kees Cook, Thadeu Lima de Souza Cascardo)
- fix style issue in selftests (Zou Wei)
- upgrade "unknown action" from KILL_THREAD to KILL_PROCESS (Rich Felker)
- replace task_pt_regs(current) with current_pt_regs() (Denis Efremov)
- fix corner-case race in USER_NOTIF (Jann Horn)
- make CONFIG_SECCOMP no longer per-arch (YiFei Zhu)
-----BEGIN PGP SIGNATURE-----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=a4u2
-----END PGP SIGNATURE-----
Merge tag 'seccomp-v5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp updates from Kees Cook:
"The bulk of the changes are with the seccomp selftests to accommodate
some powerpc-specific behavioral characteristics. Additional cleanups,
fixes, and improvements are also included:
- heavily refactor seccomp selftests (and clone3 selftests
dependency) to fix powerpc (Kees Cook, Thadeu Lima de Souza
Cascardo)
- fix style issue in selftests (Zou Wei)
- upgrade "unknown action" from KILL_THREAD to KILL_PROCESS (Rich
Felker)
- replace task_pt_regs(current) with current_pt_regs() (Denis
Efremov)
- fix corner-case race in USER_NOTIF (Jann Horn)
- make CONFIG_SECCOMP no longer per-arch (YiFei Zhu)"
* tag 'seccomp-v5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (23 commits)
seccomp: Make duplicate listener detection non-racy
seccomp: Move config option SECCOMP to arch/Kconfig
selftests/clone3: Avoid OS-defined clone_args
selftests/seccomp: powerpc: Set syscall return during ptrace syscall exit
selftests/seccomp: Allow syscall nr and ret value to be set separately
selftests/seccomp: Record syscall during ptrace entry
selftests/seccomp: powerpc: Fix seccomp return value testing
selftests/seccomp: Remove SYSCALL_NUM_RET_SHARE_REG in favor of SYSCALL_RET_SET
selftests/seccomp: Avoid redundant register flushes
selftests/seccomp: Convert REGSET calls into ARCH_GETREG/ARCH_SETREG
selftests/seccomp: Convert HAVE_GETREG into ARCH_GETREG/ARCH_SETREG
selftests/seccomp: Remove syscall setting #ifdefs
selftests/seccomp: mips: Remove O32-specific macro
selftests/seccomp: arm64: Define SYSCALL_NUM_SET macro
selftests/seccomp: arm: Define SYSCALL_NUM_SET macro
selftests/seccomp: mips: Define SYSCALL_NUM_SET macro
selftests/seccomp: Provide generic syscall setting macro
selftests/seccomp: Refactor arch register macros to avoid xtensa special case
selftests/seccomp: Use __NR_mknodat instead of __NR_mknod
selftests/seccomp: Use bitwise instead of arithmetic operator for flags
...
Pull copy_and_csum cleanups from Al Viro:
"Saner calling conventions for csum_and_copy_..._user() and friends"
[ Removing 800+ lines of code and cleaning stuff up is good - Linus ]
* 'work.csum_and_copy' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ppc: propagate the calling conventions change down to csum_partial_copy_generic()
amd64: switch csum_partial_copy_generic() to new calling conventions
sparc64: propagate the calling convention changes down to __csum_partial_copy_...()
xtensa: propagate the calling conventions change down into csum_partial_copy_generic()
mips: propagate the calling convention change down into __csum_partial_copy_..._user()
mips: __csum_partial_copy_kernel() has no users left
mips: csum_and_copy_{to,from}_user() are never called under KERNEL_DS
sparc32: propagate the calling conventions change down to __csum_partial_copy_sparc_generic()
i386: propagate the calling conventions change down to csum_partial_copy_generic()
sh: propage the calling conventions change down to csum_partial_copy_generic()
m68k: get rid of zeroing destination on error in csum_and_copy_from_user()
arm: propagate the calling convention changes down to csum_partial_copy_from_user()
alpha: propagate the calling convention changes down to csum_partial_copy.c helpers
saner calling conventions for csum_and_copy_..._user()
csum_and_copy_..._user(): pass 0xffffffff instead of 0 as initial sum
csum_partial_copy_nocheck(): drop the last argument
unify generic instances of csum_partial_copy_nocheck()
icmp_push_reply(): reorder adding the checksum up
skb_copy_and_csum_bits(): don't bother with the last argument
because the heuristics that various linkers & compilers use to handle them
(include these bits into the output image vs discarding them silently)
are both highly idiosyncratic and also version dependent.
Instead of this historically problematic mess, this tree by Kees Cook (et al)
adds build time asserts and build time warnings if there's any orphan section
in the kernel or if a section is not sized as expected.
And because we relied on so many silent assumptions in this area, fix a metric
ton of dependencies and some outright bugs related to this, before we can
finally enable the checks on the x86, ARM and ARM64 platforms.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=fXAw
-----END PGP SIGNATURE-----
Merge tag 'core-build-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull orphan section checking from Ingo Molnar:
"Orphan link sections were a long-standing source of obscure bugs,
because the heuristics that various linkers & compilers use to handle
them (include these bits into the output image vs discarding them
silently) are both highly idiosyncratic and also version dependent.
Instead of this historically problematic mess, this tree by Kees Cook
(et al) adds build time asserts and build time warnings if there's any
orphan section in the kernel or if a section is not sized as expected.
And because we relied on so many silent assumptions in this area, fix
a metric ton of dependencies and some outright bugs related to this,
before we can finally enable the checks on the x86, ARM and ARM64
platforms"
* tag 'core-build-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
x86/boot/compressed: Warn on orphan section placement
x86/build: Warn on orphan section placement
arm/boot: Warn on orphan section placement
arm/build: Warn on orphan section placement
arm64/build: Warn on orphan section placement
x86/boot/compressed: Add missing debugging sections to output
x86/boot/compressed: Remove, discard, or assert for unwanted sections
x86/boot/compressed: Reorganize zero-size section asserts
x86/build: Add asserts for unwanted sections
x86/build: Enforce an empty .got.plt section
x86/asm: Avoid generating unused kprobe sections
arm/boot: Handle all sections explicitly
arm/build: Assert for unwanted sections
arm/build: Add missing sections
arm/build: Explicitly keep .ARM.attributes sections
arm/build: Refactor linker script headers
arm64/build: Assert for unwanted sections
arm64/build: Add missing DWARF sections
arm64/build: Use common DISCARDS in linker script
arm64/build: Remove .eh_frame* sections due to unwind tables
...
In order to make adding configurable features into seccomp easier,
it's better to have the options at one single location, considering
especially that the bulk of seccomp code is arch-independent. An quick
look also show that many SECCOMP descriptions are outdated; they talk
about /proc rather than prctl.
As a result of moving the config option and keeping it default on,
architectures arm, arm64, csky, riscv, sh, and xtensa did not have SECCOMP
on by default prior to this and SECCOMP will be default in this change.
Architectures microblaze, mips, powerpc, s390, sh, and sparc have an
outdated depend on PROC_FS and this dependency is removed in this change.
Suggested-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/lkml/CAG48ez1YWz9cnp08UZgeieYRhHdqh-ch7aNwc4JRBnGyrmgfMg@mail.gmail.com/
Signed-off-by: YiFei Zhu <yifeifz2@illinois.edu>
[kees: added HAVE_ARCH_SECCOMP help text, tweaked wording]
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/9ede6ef35c847e58d61e476c6a39540520066613.1600951211.git.yifeifz2@illinois.edu
Most of dma-debug.h is not required by anything outside of kernel/dma.
Move the four declarations needed by dma-mappin.h or dma-ops providers
into dma-mapping.h and dma-map-ops.h, and move the remainder of the
file to kernel/dma/debug.h.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Split out all the bits that are purely for dma_map_ops implementations
and related code into a new <linux/dma-map-ops.h> header so that they
don't get pulled into all the drivers. That also means the architecture
specific <asm/dma-mapping.h> is not pulled in by <linux/dma-mapping.h>
any more, which leads to a missing includes that were pulled in by the
x86 or arm versions in a few not overly portable drivers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
The new field 'dma_range_map' in struct device is used to facilitate the
use of single or multiple offsets between mapping regions of cpu addrs and
dma addrs. It subsumes the role of "dev->dma_pfn_offset" which was only
capable of holding a single uniform offset and had no region bounds
checking.
The function of_dma_get_range() has been modified so that it takes a single
argument -- the device node -- and returns a map, NULL, or an error code.
The map is an array that holds the information regarding the DMA regions.
Each range entry contains the address offset, the cpu_start address, the
dma_start address, and the size of the region.
of_dma_configure() is the typical manner to set range offsets but there are
a number of ad hoc assignments to "dev->dma_pfn_offset" in the kernel
driver code. These cases now invoke the function
dma_direct_set_offset(dev, cpu_addr, dma_addr, size).
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
[hch: various interface cleanups]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Addition of SECCOMP_FILTER exposed a longstanding bug in
do_syscall_trace_enter, whereby r0 (the 5th argument register) was
mistakenly used where r3 (syscall_nr) was intended. By overwriting r0
rather than r3 with -1 when attempting to block a syscall, the
existing code would instead have caused the syscall to execute with an
argument clobbered.
Commit 0bb605c2c7 then introduced skipping of the syscall when
do_syscall_trace_enter returns -1, so that the return value set by
seccomp filters would not be clobbered by -ENOSYS. This eliminated the
clobbering of the 5th argument register, but instead caused syscalls
made with a 5th argument of -1 to be misinterpreted as a request by
do_syscall_trace_enter to suppress the syscall.
Fixes: 0bb605c2c7 ("sh: Add SECCOMP_FILTER")
Fixes: ab99c733ae ("sh: Make syscall tracer use tracehook notifiers, add TIF_NOTIFY_RESUME.")
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Rich Felker <dalias@libc.org>
Commit 0cd39f4600 added inclusion of smp.h to lockdep.h,
creating a circular include dependency where arch/sh's asm/smp.h in
turn includes spinlock.h which depends on lockdep.h. Since our
asm/smp.h does not actually need spinlock.h, just remove it.
Fixes: 0cd39f4600 ("locking/seqlock, headers: Untangle the spaghetti monster")
Tested-by: Rob Landley <rob@landley.net>
Signed-off-by: Rich Felker <dalias@libc.org>
Add a CONFIG_SET_FS option that is selected by architecturess that
implement set_fs, which is all of them initially. If the option is not
set stubs for routines related to overriding the address space are
provided so that architectures can start to opt out of providing set_fs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The .comment section doesn't belong in STABS_DEBUG. Split it out into a
new macro named ELF_DETAILS. This will gain other non-debug sections
that need to be accounted for when linking with --orphan-handling=warn.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: linux-arch@vger.kernel.org
Link: https://lore.kernel.org/r/20200821194310.3089815-5-keescook@chromium.org
All callers of these primitives will
* discard anything we might've copied in case of error
* ignore the csum value in case of error
* always pass 0xffffffff as the initial sum, so the
resulting csum value (in case of success, that is) will never be 0.
That suggest the following calling conventions:
* don't pass err_ptr - just return 0 on error.
* don't bother with zeroing destination, etc. in case of error
* don't pass the initial sum - just use 0xffffffff.
This commit does the minimal conversion in the instances of csum_and_copy_...();
the changes of actual asm code behind them are done later in the series.
Note that this asm code is often shared with csum_partial_copy_nocheck();
the difference is that csum_partial_copy_nocheck() passes 0 for initial
sum while csum_and_copy_..._user() pass 0xffffffff. Fortunately, we are
free to pass 0xffffffff in all cases and subsequent patches will use that
freedom without any special comments.
A part that could be split off: parisc and uml/i386 claimed to have
csum_and_copy_to_user() instances of their own, but those were identical
to the generic one, so we simply drop them. Not sure if it's worth
a separate commit...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
It's always 0. Note that we theoretically could use ~0U as well -
result will be the same modulo 0xffff, _if_ the damn thing did the
right thing for any value of initial sum; later we'll make use of
that when convenient.
However, unlike csum_and_copy_..._user(), there are instances that
did not work for arbitrary initial sums; c6x is one such.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
quite a few architectures have the same csum_partial_copy_nocheck() -
simply memcpy() the data and then return the csum of the copy.
hexagon, parisc, ia64, s390, um: explicitly spelled out that way.
arc, arm64, csky, h8300, m68k/nommu, microblaze, mips/GENERIC_CSUM, nds32,
nios2, openrisc, riscv, unicore32: end up picking the same thing spelled
out in lib/checksum.h (with varying amounts of perversions along the way).
everybody else (alpha, arm, c6x, m68k/mmu, mips/!GENERIC_CSUM, powerpc,
sh, sparc, x86, xtensa) have non-generic variants. For all except c6x
the declaration is in their asm/checksum.h. c6x uses the wrapper
from asm-generic/checksum.h that would normally lead to the lib/checksum.h
instance, but in case of c6x we end up using an asm function from arch/c6x
instead.
Screw that mess - have architectures with private instances define
_HAVE_ARCH_CSUM_AND_COPY in their asm/checksum.h and have the default
one right in net/checksum.h conditional on _HAVE_ARCH_CSUM_AND_COPY
*not* defined.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
changes to arch/sh.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJfODUiAAoJELcQ+SIFb8Hau0wH/iPeZyv0EhIwL41OPrWhm5wb
26MNWPvPjYIpKVpr0HMXiffILv595ntvrH0Ujnh1+e8J2kRj0eT+T91UkoyGSfav
oWmjgcG3NRK6p9882Oo8Xavjr1cTTclOmmDInR4lpAcfIBXkeq2eX0R1h2IuGdNM
idGlXhJMkgV+xTlgZy7pYmw5pvFMqL5j7fAUQxm0UoY9kbu8Ac4bOR5WrqtFpkjt
xTh9141YvSSfpRx9uMzrQLuUYGzGePhnjUGSUf/b1deYG/33lNtzhHr+QMK6BpXr
zdhFalJP40+m+2tG0nCBpAIZcWiOLGb23in5n/trFx3BGZfUf5EKnhZEGUYeE7Q=
=XWDn
-----END PGP SIGNATURE-----
Merge tag 'sh-for-5.9' of git://git.libc.org/linux-sh
Pull arch/sh updates from Rich Felker:
"Cleanup, SECCOMP_FILTER support, message printing fixes, and other
changes to arch/sh"
* tag 'sh-for-5.9' of git://git.libc.org/linux-sh: (34 commits)
sh: landisk: Add missing initialization of sh_io_port_base
sh: bring syscall_set_return_value in line with other architectures
sh: Add SECCOMP_FILTER
sh: Rearrange blocks in entry-common.S
sh: switch to copy_thread_tls()
sh: use the generic dma coherent remap allocator
sh: don't allow non-coherent DMA for NOMMU
dma-mapping: consolidate the NO_DMA definition in kernel/dma/Kconfig
sh: unexport register_trapped_io and match_trapped_io_handler
sh: don't include <asm/io_trapped.h> in <asm/io.h>
sh: move the ioremap implementation out of line
sh: move ioremap_fixed details out of <asm/io.h>
sh: remove __KERNEL__ ifdefs from non-UAPI headers
sh: sort the selects for SUPERH alphabetically
sh: remove -Werror from Makefiles
sh: Replace HTTP links with HTTPS ones
arch/sh/configs: remove obsolete CONFIG_SOC_CAMERA*
sh: stacktrace: Remove stacktrace_ops.stack()
sh: machvec: Modernize printing of kernel messages
sh: pci: Modernize printing of kernel messages
...
Patch series "iomap: Constify ioreadX() iomem argument", v3.
The ioread8/16/32() and others have inconsistent interface among the
architectures: some taking address as const, some not.
It seems there is nothing really stopping all of them to take pointer to
const.
This patch (of 4):
The ioreadX() and ioreadX_rep() helpers have inconsistent interface. On
some architectures void *__iomem address argument is a pointer to const,
on some not.
Implementations of ioreadX() do not modify the memory under the address so
they can be converted to a "const" version for const-safety and
consistency among architectures.
[krzk@kernel.org: sh: clk: fix assignment from incompatible pointer type for ioreadX()]
Link: http://lkml.kernel.org/r/20200723082017.24053-1-krzk@kernel.org
[akpm@linux-foundation.org: fix drivers/mailbox/bcm-pdc-mailbox.c]
Link: http://lkml.kernel.org/r/202007132209.Rxmv4QyS%25lkp@intel.com
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Allen Hubbe <allenbh@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Link: http://lkml.kernel.org/r/20200709072837.5869-1-krzk@kernel.org
Link: http://lkml.kernel.org/r/20200709072837.5869-2-krzk@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Current SH will get below warning at strncpy()
In file included from ${LINUX}/arch/sh/include/asm/string.h:3,
from ${LINUX}/include/linux/string.h:20,
from ${LINUX}/include/linux/bitmap.h:9,
from ${LINUX}/include/linux/nodemask.h:95,
from ${LINUX}/include/linux/mmzone.h:17,
from ${LINUX}/include/linux/gfp.h:6,
from ${LINUX}/innclude/linux/slab.h:15,
from ${LINUX}/linux/drivers/mmc/host/vub300.c:38:
${LINUX}/drivers/mmc/host/vub300.c: In function 'new_system_port_status':
${LINUX}/arch/sh/include/asm/string_32.h:51:42: warning: array subscript\
80 is above array bounds of 'char[26]' [-Warray-bounds]
: "0" (__dest), "1" (__src), "r" (__src+__n)
~~~~~^~~~
In general, strncpy() should behave like below.
char dest[10];
char *src = "12345";
strncpy(dest, src, 10);
// dest = {'1', '2', '3', '4', '5',
'\0','\0','\0','\0','\0'}
But, current SH strnpy() has 2 issues.
1st is it will access to out-of-memory (= src + 10).
2nd is it needs big fixup for it, and maintenance __asm__
code is difficult.
To solve these issues, this patch simply uses generic strncpy()
instead of architecture specific one.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alan Modra <amodra@gmail.com>
Cc: Bin Meng <bin.meng@windriver.com>
Cc: Chen Zhou <chenzhou10@huawei.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://marc.info/?l=linux-renesas-soc&m=157664657013309
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit 61a47c1ad3 ("sysctl: Remove the sysctl system call"),
sys_sysctl is actually unavailable: any input can only return an error.
We have been warning about people using the sysctl system call for years
and believe there are no more users. Even if there are users of this
interface if they have not complained or fixed their code by now they
probably are not going to, so there is no point in warning them any
longer.
So completely remove sys_sysctl on all architectures.
[nixiaoming@huawei.com: s390: fix build error for sys_call_table_emu]
Link: http://lkml.kernel.org/r/20200618141426.16884-1-nixiaoming@huawei.com
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Will Deacon <will@kernel.org> [arm/arm64]
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Bin Meng <bin.meng@windriver.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: chenzefeng <chenzefeng2@huawei.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christian Brauner <christian@brauner.io>
Cc: Chris Zankel <chris@zankel.net>
Cc: David Howells <dhowells@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Diego Elio Pettenò <flameeyes@flameeyes.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kars de Jong <jongk@linux-m68k.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Nick Piggin <npiggin@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Paul Burton <paulburton@kernel.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Sven Schnelle <svens@stackframe.org>
Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Zhou Yanjie <zhouyanjie@wanyeetech.com>
Link: http://lkml.kernel.org/r/20200616030734.87257-1-nixiaoming@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Hildenbrand
Yury Norov
Linus Torvalds
Anshuman Khandual
Peter Xu
Masahiro Yamada
Kefeng Wang
Matthew Wilcox (Oracle)
Zhang Yunkai
Mickaël Salaün
Marc Zyngier
Ingo Molnar
Sascha Hauer
Al Viro
Jens Axboe
Thomas Gleixner
Christoph Hellwig
Viresh Kumar
Christian Brauner
Wang Qing
Andy Shevchenko
Jinyang He
Qinglang Miao
Randy Dunlap
Necip Fazil Yildiran
Willem de Bruijn
Geert Uytterhoeven
Peter Zijlstra
YiFei Zhu
Arnd Bergmann
Nicholas Piggin
Joe Perches
Minchan Kim
Mike Rapoport
Jim Quinlan
Rich Felker
Masami Hiramatsu
Kees Cook
Gustavo A. R. Silva
Krzysztof Kozlowski
Kuninori Morimoto
Xiaoming Ni