Now mconf, qconf, gconf, nconf are always added to hostprogs-y.
Files added to hostprogs-y are removed by "make clean".
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Now it is harmless to add all host programs to hostprogs-y.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Assume we have a Makefile like:
hostprogs-y := foo bar
foo-objs := foo1.o foo2.o
bar-objs := bar1.o bar2.o
Without this commit, the host program foo depends on all of
foo1.o foo2.o bar1.o bar2.o.
This commit allows to handle the dependency of each host program
separately.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The comment in scripts/Makefile.build says as follows:
We would rather have a list of rules like
foo.o: $(foo-objs)
but that's not so easy, so we rather make all composite objects depend
on the set of all their parts
This commit makes it possible!
For example, assume a Makefile like this
obj-m = foo.o bar.o
foo-objs := foo1.o foo2.o
bar-objs := bar1.o bar2.o
Without this patch, foo.o depends on all of
foo1.o foo2.o bar1.o bar2.o.
It looks funny that foo.o is regenerated when bar1.c is updated.
Now we can handle the dependency of foo.o and bar.o separately.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
- Fix for an ACPI-based device hotplug regression introduced in 3.14
that causes a kernel panic to trigger when memory hot-remove is
attempted with CONFIG_ACPI_HOTPLUG_MEMORY unset from Tang Chen.
- Fix for a cpufreq regression introduced in 3.16 that triggers a
"sleeping function called from invalid context" bug in
dev_pm_opp_init_cpufreq_table() from Stephen Boyd.
- ACPI battery driver fix for a warning message added in 3.16 that
prints silly stuff sometimes from Mariusz Ceier.
- Hibernation fix for safer handling of mismatches in the 820 memory
map between the configurations during image creation and during
the subsequent restore from Chun-Yi Lee.
- ACPI processor driver fix to handle CPU hotplug notifications
correctly during system suspend/resume from Lan Tianyu.
- Series of four cpuidle menu governor cleanups that also should
speed it up a bit from Mel Gorman.
- Fixes for the speedstep-smi, integrator, cpu0 and arm_big_little
cpufreq drivers from Hans Wennborg, Himangi Saraogi, Markus Pargmann
and Uwe Kleine-König.
- Version 3.0 of the analyze_suspend.py suspend profiling tool
from Todd E Brandt.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=kpiw
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI and power management updates from Rafael Wysocki:
"These are a couple of regression fixes, cpuidle menu governor
optimizations, fixes for ACPI proccessor and battery drivers,
hibernation fix to avoid problems related to the e820 memory map,
fixes for a few cpufreq drivers and a new version of the suspend
profiling tool analyze_suspend.py.
Specifics:
- Fix for an ACPI-based device hotplug regression introduced in 3.14
that causes a kernel panic to trigger when memory hot-remove is
attempted with CONFIG_ACPI_HOTPLUG_MEMORY unset from Tang Chen
- Fix for a cpufreq regression introduced in 3.16 that triggers a
"sleeping function called from invalid context" bug in
dev_pm_opp_init_cpufreq_table() from Stephen Boyd
- ACPI battery driver fix for a warning message added in 3.16 that
prints silly stuff sometimes from Mariusz Ceier
- Hibernation fix for safer handling of mismatches in the 820 memory
map between the configurations during image creation and during the
subsequent restore from Chun-Yi Lee
- ACPI processor driver fix to handle CPU hotplug notifications
correctly during system suspend/resume from Lan Tianyu
- Series of four cpuidle menu governor cleanups that also should
speed it up a bit from Mel Gorman
- Fixes for the speedstep-smi, integrator, cpu0 and arm_big_little
cpufreq drivers from Hans Wennborg, Himangi Saraogi, Markus
Pargmann and Uwe Kleine-König
- Version 3.0 of the analyze_suspend.py suspend profiling tool from
Todd E Brandt"
* tag 'pm+acpi-3.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / battery: Fix warning message in acpi_battery_get_state()
PM / tools: analyze_suspend.py: update to v3.0
cpufreq: arm_big_little: fix module license spec
cpufreq: speedstep-smi: fix decimal printf specifiers
ACPI / hotplug: Check scan handlers in acpi_scan_hot_remove()
cpufreq: OPP: Avoid sleeping while atomic
cpufreq: cpu0: Do not print error message when deferring
cpufreq: integrator: Use set_cpus_allowed_ptr
PM / hibernate: avoid unsafe pages in e820 reserved regions
ACPI / processor: Make acpi_cpu_soft_notify() process CPU FROZEN events
cpuidle: menu: Lookup CPU runqueues less
cpuidle: menu: Call nr_iowait_cpu less times
cpuidle: menu: Use ktime_to_us instead of reinventing the wheel
cpuidle: menu: Use shifts when calculating averages where possible
Pull misc kbuild updates from Michal Marek:
"This is the non-critical part of kbuild for 3.17-rc1:
- make help hint to use make -s with make kernelrelease et al.
- moved a kbuild document to Documentation/kbuild where it belongs
- four new Coccinelle scripts, one dropped and one fixed
- new make kselftest target to run various tests on the kernel"
* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kbuild: kselftest - new make target to build and run kernel selftests
Coccinelle: Script to replace if and BUG with BUG_ON
Coccinelle: Script to detect incorrect argument to sizeof
Coccinelle: Script to use ARRAY_SIZE instead of division of two sizeofs
Coccinelle: Script to detect cast after memory allocation
coccinelle/null: solve parse error
Documentation: headers_install.txt is part of kbuild
kbuild: make -s should be used with kernelrelease/kernelversion/image_name
Pull kbuild updates from Michal Marek:
- make clean also considers $(extra-m) and $(extra-) to be consistent
- cleanup and fixes in scripts/Makefile.host
- allow to override the name of the Python 2 executable with make
PYTHON=... (only needed for ia64 in practice)
- option to split debugingo into *.dwo files to save disk space if the
compiler supports it (CONFIG_DEBUG_INFO_SPLIT)
- option to use dwarf4 debuginfo if the compiler supports it
(CONFIG_DEBUG_INFO_DWARF4)
- fix for disabling certain warnings with clang
- fix for unneeded rebuild with dash when a command contains
backslashes
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kbuild: Fix handling of backslashes in *.cmd files
kbuild, LLVMLinux: Supress warnings unless W=1-3
Kbuild: Add a option to enable dwarf4 v2
kbuild: Support split debug info v4
kbuild: allow to override Python command name
kbuild: clean-up and bug fix of scripts/Makefile.host
kbuild: clean up scripts/Makefile.host
kbuild: drop shared library support from Makefile.host
kbuild: fix a bug of C++ host program handling
kbuild: fix a typo in scripts/Makefile.host
scripts/Makefile.clean: clean also $(extra-m) and $(extra-)
Update of analyze_suspend.py to v3.0
New features include back-2-back suspend testing, device filters to
reduce the html size, the inclusion of device_prepare and device_complete
callbacks, a usb topography list, and the ability to control USB
device autosuspend.
UI upgrades include a device detail window and mini-timeline, the addition
of a suspend_prepare and resume_complete phase to the timeline which includes
the associated device callbacks, automatic highlight of related callbacks,
and general color and name changes for better reability.
The new version relies on two trace point patches that are already in
the kernel:
enable_trace_events_suspend_resume.patch
enable_trace_events_device_pm_callback.patch
It has legacy support for older kernels without these trace events, but
when available the tool processes the ftrace output alone (dmesg has
been deprecated as a tool input, and is only gathered for convenience).
Link: https://01.org/suspendresume/downloads/analyzesuspend-v3.0
Signed-off-by: Todd Brandt <todd.e.brandt@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since commit 5d2acfc7b9 ("kconfig: make
allnoconfig disable options behind EMBEDDED and EXPERT") in 3.15-rc1,
"make allnoconfig" disables every possible config option.
However, a few configuration options (CC_OPTIMIZE_FOR_SIZE,
OPTIMIZE_INLINING) produce a smaller kernel when turned on, and a few
choices exist (compression, highmem, allocator) for which a non-default
option produces a smaller kernel.
Add a "tinyconfig" option, which starts from allnoconfig and then sets
these options to configure the tiniest possible kernel. This provides a
better baseline for embedded systems or efforts to reduce kernel size.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
The new mergeconfig helper makes it easier to add other partial
configurations similar to kvmconfig. Architecture-independent portions
of those partial configurations should go in
kernel/configs/${name}.config, and architecture-dependent portions
should go in arch/${arch}/configs/${name}.config.
Based on a patch by Luis R. Rodriguez <mcgrof@suse.com>.
Originally-Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Modified to make the helper name more general than just virtualization,
support architecture-dependent and architecture-independent partial
configurations, move the helper and kvmconfig to
scripts/kconfig/Makefile, and factor out more of the common file path.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
currently bin2c builds only if CONFIG_IKCONFIG=y. But bin2c will now be
used by kexec too. So make it compilation dependent on CONFIG_BUILD_BIN2C
and this config option can be selected by CONFIG_KEXEC and CONFIG_IKCONFIG.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: WANG Chao <chaowang@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch series does not do kernel signature verification yet. I plan
to post another patch series for that. Now distributions are already
signing PE/COFF bzImage with PKCS7 signature I plan to parse and verify
those signatures.
Primary goal of this patchset is to prepare groundwork so that kernel
image can be signed and signatures be verified during kexec load. This
should help with two things.
- It should allow kexec/kdump on secureboot enabled machines.
- In general it can help even without secureboot. By being able to verify
kernel image signature in kexec, it should help with avoiding module
signing restrictions. Matthew Garret showed how to boot into a custom
kernel, modify first kernel's memory and then jump back to old kernel and
bypass any policy one wants to.
This patch (of 15):
Kexec wants to use bin2c and it wants to use it really early in the build
process. See arch/x86/purgatory/ code in later patches.
So move bin2c in scripts/basic so that it can be built very early and
be usable by arch/x86/purgatory/
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: WANG Chao <chaowang@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch adds support for ARCH=x86 into checkstack.
Commit ffee0de411 ("x86: Default to ARCH=x86 to avoid overriding
CONFIG_64BIT") had merged ARCH=i386 and ARCH=x86_64 into one ARCH=x86.
checkstack.pl searches patterns of machine instructions which are
usually used for allocating stack frames. checkstalk.pl needs either
i386 or x86_64, x86 isn't enough:
$ make checkstack
objdump -d vmlinux $(find . -name '*.ko') | \
perl linux/scripts/checkstack.pl x86
wrong or unknown architecture "x86"
Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since the kernel now has a COMPAT_SYSCALL infrastructure via commit
4683661388 ("COMPAT_SYSCALL_DEFINE: infrastructure"), add the
corresponding regex for generating compat_sys_* symbols in the tags
files (similar to sys_*).
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All coccinelle scripts have a copyright in the header.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Suggested-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Warns or generates patch for NULL check before the following functions:
kfree
usb_free_urb
debugfs_remove
debugfs_remove_recursive
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Acked-by: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Gilles Muller <Gilles.Muller@lip6.fr>
Cc: Joe Perches <joe@perches.com>
Cc: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit c353acba ("kbuild: make: fix if_changed when command contains
backslashes") attempted to handle backslashes in *.cmd files, but it
only handled double backslashes for some reason. Changing make-cmd to also
handle single backslashes fixes rebuilds with dash, but it breaks bash
again. The reason is that the two shells disagree about the
interpretation of backslash sequences in the echo builtin. The way out
of this is to print the command with printf '%s\n'. While at it,
document what the individual parts of make-cmd do and why.
Reported-and-tested-by: Konstantin Khlebnikov <koct9i@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Merge incoming from Andrew Morton:
- Various misc things.
- arch/sh updates.
- Part of ocfs2. Review is slow.
- Slab updates.
- Most of -mm.
- printk updates.
- lib/ updates.
- checkpatch updates.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (226 commits)
checkpatch: update $declaration_macros, add uninitialized_var
checkpatch: warn on missing spaces in broken up quoted
checkpatch: fix false positives for --strict "space after cast" test
checkpatch: fix false positive MISSING_BREAK warnings with --file
checkpatch: add test for native c90 types in unusual order
checkpatch: add signed generic types
checkpatch: add short int to c variable types
checkpatch: add for_each tests to indentation and brace tests
checkpatch: fix brace style misuses of else and while
checkpatch: add --fix option for a couple OPEN_BRACE misuses
checkpatch: use the correct indentation for which()
checkpatch: add fix_insert_line and fix_delete_line helpers
checkpatch: add ability to insert and delete lines to patch/file
checkpatch: add an index variable for fixed lines
checkpatch: warn on break after goto or return with same tab indentation
checkpatch: emit a warning on file add/move/delete
checkpatch: add test for commit id formatting style in commit log
checkpatch: emit fewer kmalloc_array/kcalloc conversion warnings
checkpatch: improve "no space after cast" test
checkpatch: allow multiple const * types
...
Pull trivial tree changes from Jiri Kosina:
"Summer edition of trivial tree updates"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits)
doc: fix two typos in watchdog-api.txt
irq-gic: remove file name from heading comment
MAINTAINERS: Add miscdevice.h to file list for char/misc drivers.
scsi: mvsas: mv_sas.c: Fix for possible null pointer dereference
doc: replace "practise" with "practice" in Documentation
befs: remove check for CONFIG_BEFS_RW
scsi: doc: fix 'SCSI_NCR_SETUP_MASTER_PARITY'
drivers/usb/phy/phy.c: remove a leading space
mfd: fix comment
cpuidle: fix comment
doc: hpfall.c: fix missing null-terminate after strncpy call
usb: doc: hotplug.txt code typos
kbuild: fix comment in Makefile.modinst
SH: add proper prompt to SH_MAGIC_PANEL_R2_VERSION
ARM: msm: Remove MSM_SCM
crypto: Remove MPILIB_EXTRA
doc: CN: remove dead link, kerneltrap.org no longer works
media: update reference, kerneltrap.org no longer works
hexagon: update reference, kerneltrap.org no longer works
doc: LSM: update reference, kerneltrap.org no longer works
...
Using uninitialized_var reports a false positive for "Missing blank line
after declarations".
Fix it by adding uninitialized_var to the $declaration_macros exceptions
list.
Move the macro list after $Type is declared.
Add optional prefixes to DECLARE_<FOO> and DEFINE_<BAR>
macro declarations to allow forms like:
MLX4_DECLARE_DOORBELL_LOCK
Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Dotan Barak <dotanb@mellanox.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Checkpatch already complains when people break up quoted strings but
it's still pretty common. One mistake that people often make is they
leave out the space character between the two strings.
This check adds around 450 new warnings and has a low rate of false
positives.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Andy Whitcroft <apw@canonical.com>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 89da401f6cff ("checkpatch: improve "no space after cast" test")
in -next improved the cast test for non pointer types, but also
introduced false positives for some types of static inlines.
Add a test for an open brace to the exclusions to avoid these false
positives.
Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Hartley Sweeten <HartleyS@visionengravers.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Using --file mode can give false positives with MISSING_BREAK
fall-through warnings on simple but long multiple consecutive case
statements.
Look for all lines before a case statement for a switch or a statement
when using --file mode.
Fix a misspelling of preceded while there.
Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
c90 section "6.7.2 Type Specifiers" says:
"type specifiers may occur in any order"
That means that:
short int is the same as int short
unsigned short int is the same as int unsigned short
etc...
checkpatch currently parses only a subset of these allowed types.
For instance: "unsigned short" and "signed short" are found by
checkpatch as a specific type, but none of the or "int short" or "int
signed short" variants are found.
Add another table for the "kernel style misordered" variants.
Add this misordered table to the findable types.
Warn when the misordered style is used.
This improves the "Missing a blank line after declarations" test as it
depends on the correct parsing of the $Declare variable which looks for
"$Type $Ident;" (ie: declarations like "int foo;").
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Current generic types are unsigned or unspecified. Add signed to the
types.
Reorder the types to find the longest match first.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
short int is one of the 6.7.2 c90 types.
Find it appropriately.
This fixes a defect in checkpatch where it suggests that a line break
after declaration is required using an input like:
int foo;
short int bar;
Without this change, it warns on the short int line.
Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Hartley Sweeten <HartleyS@visionengravers.com>
Acked-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All the various for_each loop macros were not tested for trailing brace
on the following lines and for bad indentation.
Add them.
Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Greg KH <gregkh@linuxfoundation.org>
Cc: Andy Whitcroft <apw@canonical.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add --fix corrections for ELSE_AFTER_BRACE and WHILE_AFTER_BRACE
misuses.
if (x) {
...
}
else {
...
}
is corrected to
if (x) {
...
} else {
...
}
and
do {
...
}
while (x);
is corrected to
do {
...
} while (x);
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Style misuses of these types are corrected:
typedef struct foo
{
int bar;
};
int foo(int bar) { return bar+1;
}
int foo(int bar) {
return bar+1;
}
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I copied the which subroutine from get_maintainer.pl.
Unfortunately, get_maintainer uses a 4 space indentation so use the
proper tab indentation instead.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Neaten the uses of patch/file line insertions or deletions. Hide the
mechanism used.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This can be valuable to insert or delete blank lines as well as fix
misplaced brace or else uses.
Store indexes of lines to be added/deleted and the new lines.
When creating the --fix file, insert or delete the appropriate lines and
update the patch range information.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make the fix code a bit easier to read.
This should also start to allow an easier mechanism to insert/delete
lines eventually too.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Using break; after a goto or return is unnecessary so emit a warning
when the break is at the same indent level.
So this emits a warning on:
switch (foo) {
case 1:
goto err;
break;
}
but not on:
switch (foo) {
case 1:
if (bar())
goto err;
break;
}
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Whenever files are added, moved, or deleted, the MAINTAINERS file
patterns can be out of sync or outdated.
To try to keep MAINTAINERS more up-to-date, add a one-time warning
whenever a patch does any of those.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit logs have various forms of commit id references.
Try to standardize on a 12 character long lower case commit id along
with a description of parentheses and the quoted subject line.
ie: commit 0123456789ab ("commit description")
If git and a git tree exists, look up the commit id and emit the
appropriate line as part of the message.
Signed-off-by: Joe Perches <joe@perches.com>
Requested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Avoid matching allocs that appear to be known small multiplications of a
sizeof with a constant because gcc as of 4.8 cannot optimize the code in
a calloc() exactly the same way as an alloc().
Look for numeric constants or what appear to be upper case only macro
#defines.
Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Theodore Ts'o <tytso@mit.edu>
Original-patch-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This --strict test previously worked only for what appeared to be cast
to pointer types.
Make it work for all casts.
Also, there's no reason to show the previous line for this type of
message, so don't.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
checkpatch's $Type variable does not match declarations of multiple
const * types.
This can produce false positives for things like:
$ ./scripts/checkpatch.pl -f drivers/staging/comedi/comedidev.h
WARNING: Missing a blank line after declarations
#60: FILE: drivers/staging/comedi/comedidev.h:60:
+ const struct comedi_lrange *range_table;
+ const struct comedi_lrange *const *range_table_list;
Fix the $Type variable to support matching multiple "* const" uses.
Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Hartley Sweeten <HartleyS@visionengravers.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Parentheses around &(foo->bar) and *(foo->bar) are unnecessary. Emit a
--strict only message on these uses.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Editing Kconfig dependencies can emit unnecessary messages about missing
or too short help entries.
Only emit the message when adding help sections to Kconfig files.
Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Jean Delvare <jdelvare@suse.de>
Tested-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make it consistent with the other missing or multiple blank line tests.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Multiple consecutive blank lines waste screen space. Emit a --strict
only message with these blank lines.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a --strict test asking for a blank line after
function/struct/union/enum declarations.
Allow exceptions for several attributes and macro uses.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This might help a kernel hacker think twice before blindly adding a
newline.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are some patches created by git format-patch that when scanned by
checkpatch report errors on lines like
To: address.tld
This is a checkpatch false positive.
Improve the logic a bit to ignore folded email headers to avoid emitting
these messages.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a function pointer declaration check to the test for blank line
needed after declarations.
Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Bruce W Allan <bruce.w.allan@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A single escaped constant char is not a complex macro.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Using an else following a break or return can unnecessarily indent code
blocks.
ie:
for (i = 0; i < 100; i++) {
int foo = bar();
if (foo < 1)
break;
else
usleep(1);
}
is generally better written as:
for (i = 0; i < 100; i++) {
int foo = bar();
if (foo < 1)
break;
usleep(1);
}
Warn when a bare else statement is preceded by a break or return
indented 1 tab more than the else.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Logging messages that show some type of "out of memory" error are
generally unnecessary as there is a generic message and a stack dump
done by the memory subsystem.
These messages generally increase kernel size without much added value.
Emit a warning on these types of messages.
This test looks for any inserted message function, then looks at the
previous line for an "if (!foo)" or "if (foo == NULL)" test and then
looks at the preceding statement for an allocation function like "foo =
kmalloc()"
ie: this code matches:
foo = kmalloc();
if (foo == NULL) {
printk("Out of memory\n");
return -ENOMEM;
}
This test is very crude and incomplete.
This test can miss quite a lot of of OOM messages that do not have this
specific form.
ie: this code does not match:
foo = kmalloc();
if (!foo) {
rtn = -ENOMEM;
printk("Out of memory!\n");
goto out;
}
This test could also be a false positive when the logging message itself
does not specify anything about memory, but I did not find any false
positives in my limited testing.
spatch could be a better solution but correctness seems non-trivial for
that tool too.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull security subsystem updates from James Morris:
"In this release:
- PKCS#7 parser for the key management subsystem from David Howells
- appoint Kees Cook as seccomp maintainer
- bugfixes and general maintenance across the subsystem"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (94 commits)
X.509: Need to export x509_request_asymmetric_key()
netlabel: shorter names for the NetLabel catmap funcs/structs
netlabel: fix the catmap walking functions
netlabel: fix the horribly broken catmap functions
netlabel: fix a problem when setting bits below the previously lowest bit
PKCS#7: X.509 certificate issuer and subject are mandatory fields in the ASN.1
tpm: simplify code by using %*phN specifier
tpm: Provide a generic means to override the chip returned timeouts
tpm: missing tpm_chip_put in tpm_get_random()
tpm: Properly clean sysfs entries in error path
tpm: Add missing tpm_do_selftest to ST33 I2C driver
PKCS#7: Use x509_request_asymmetric_key()
Revert "selinux: fix the default socket labeling in sock_graft()"
X.509: x509_request_asymmetric_keys() doesn't need string length arguments
PKCS#7: fix sparse non static symbol warning
KEYS: revert encrypted key change
ima: add support for measuring and appraising firmware
firmware_class: perform new LSM checks
security: introduce kernel_fw_from_file hook
PKCS#7: Missing inclusion of linux/err.h
...
This script detects cases where BUG() follows an if condition on an
expression and replaces the if condition and BUG() with a BUG_ON having
the conditional expression of the if statement as argument.
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
This makes an effort to find cases where the argument to sizeof is wrong
in memory allocation functions by checking the type of the allocated
memory when it is a double pointer and ensuring the sizeof argument takes
a pointer to the the memory being allocated. There are false positives
in cases the sizeof argument is not used in constructing the return value.
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
This script detects cases where ARRAY_SIZE can be used such as
where there is a division of sizeof the array by the sizeof its first
element or by any indexed element or the element type. It replaces the
division of the two sizeofs by ARRAY_SIZE.
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
This script detects cases of use of cast for the value returned by
kmalloc, kzalloc, kcalloc, kmem_cache_alloc, kmem_cache_zalloc,
kmem_cache_alloc_node, kmalloc_node and kzalloc_node and removes
the cast as it is not useful. This Coccinelle script replaces
drop_kmalloc_cast.cocci as it removes the casting in more limited
cases of kmalloc, kzalloc and kcalloc.
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
This patch solves the parse-error by adding @@ . This is necessary since
Coccinelle version 1.0.0-rc20. Also, the comment is added to use a
recent version of Coccinelle.
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
clang has more warnings enabled by default. Turn them off unless W is
set. This patch fixes a logic bug where warnings in clang were disabled
when W was set.
Signed-off-by: Behan Webster <behanw@converseincode.com>
Signed-off-by: Jan-Simon Möller <dl9pf@gmx.de>
Signed-off-by: Mark Charlebois <charlebm@gmail.com>
Cc: bp@alien8.de
Signed-off-by: Michal Marek <mmarek@suse.cz>
Here's the big driver-core pull request for 3.17-rc1.
Largest thing in here is the dma-buf rework and fence code, that touched
many different subsystems so it was agreed it should go through this
tree to handle merge issues. There's also some firmware loading
updates, as well as tests added, and a few other tiny changes, the
changelog has the details.
All have been in linux-next for a long time.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlPf1XcACgkQMUfUDdst+ylREACdHLXBa02yLrRzbrONJ+nARuFv
JuQAoMN49PD8K9iMQpXqKBvZBsu+iCIY
=w8OJ
-----END PGP SIGNATURE-----
Merge tag 'driver-core-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here's the big driver-core pull request for 3.17-rc1.
Largest thing in here is the dma-buf rework and fence code, that
touched many different subsystems so it was agreed it should go
through this tree to handle merge issues. There's also some firmware
loading updates, as well as tests added, and a few other tiny changes,
the changelog has the details.
All have been in linux-next for a long time"
* tag 'driver-core-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (32 commits)
ARM: imx: Remove references to platform_bus in mxc code
firmware loader: Fix _request_firmware_load() return val for fw load abort
platform: Remove most references to platform_bus device
test: add firmware_class loader test
doc: fix minor typos in firmware_class README
staging: android: Cleanup style issues
Documentation: devres: Sort managed interfaces
Documentation: devres: Add devm_kmalloc() et al
fs: debugfs: remove trailing whitespace
kernfs: kernel-doc warning fix
debugfs: Fix corrupted loop in debugfs_remove_recursive
stable_kernel_rules: Add pointer to netdev-FAQ for network patches
driver core: platform: add device binding path 'driver_override'
driver core/platform: remove unused implicit padding in platform_object
firmware loader: inform direct failure when udev loader is disabled
firmware: replace ALIGN(PAGE_SIZE) by PAGE_ALIGN
firmware: read firmware size using i_size_read()
firmware loader: allow disabling of udev as firmware loader
reservation: add suppport for read-only access using rcu
reservation: update api and add some helpers
...
Conflicts:
drivers/base/platform.c
For several years, the pattern "foo$" has effectively been treated as
equivalent to "foo" due to a bug in the (misnamed) helper
number_prefix(). This hasn't been observed to cause any problems, so
remove the broken $ functionality and change all foo$ patterns to foo.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The scripts/mod/modpost.c triggers the following warning:
scripts/mod/modpost.c: In function ‘remove_dot’:
scripts/mod/modpost.c:1710:10: warning: ignoring return value of ‘strtoul’, declared with attribute warn_unused_result [-Wunused-result]
The remove_dot function that calls strtoul does not care about the
numeric value of the string that is parsed but only looks for the
end of the numeric sequence. As such, it's equivalent to just skip
over all digits.
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Assume we have a Makefile like this:
hostprogs-y := foo
foo-cxxobjs := bar/baz.o
foo-objs := qux/quux.o
In this case, Kbuild creates bar/ directory,
but fails to create qux/ directory.
This commit re-writes directory creation more simply,
fixing that bug.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The directory creation can be more simplified by two levels.
[1] Drop $(dir ...)
$(dir $(f)) always returns non-empty string.
So, $(if $(dir $(f)),$(dir $(f)) is equivalent to $(dir $(f)).
[2] Unroll $(foreach ...) loop
$(dir ...) can take one or more arguments and returns a list of
directories of them.
$(foreach f, $(progs), $(dir $(f))) can be unrolled as $(dir $(progs)).
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The shared library feature in Makefile.host is no longer used.
Rip it off to keep the build infrastucture simple.
Update Documentation/kbuild/makefiles.txt too.
The section "4.3 Definition shared libraries" should be removed
and the following sections should be re-numbered.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The comment claims:
C++ executables compiled from at least one .cc file
and zero or more .c files
But C++ executables with zero .c file fail in build.
For example, assume we have a Makefile like this:
hostprogs-y := foo
foo-cxxobjs := bar.o
In this case, foo is treated as host-csingle
and Kbuild tries to search non-existing foo.c source.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Object-like macros are different than function-like macros:
https://gcc.gnu.org/onlinedocs/cpp/Object-like-Macros.htmlhttps://gcc.gnu.org/onlinedocs/cpp/Function-like-Macros.html
They are not parsed correctly, generating invalid intermediate
files (xmls) for cases like:
#define BIT_MASK (0xFF << BIT_SHIFT)
where "OxFF <<" is considered to be parameter type.
When parsing, we can differentiate beween these two types of macros by
checking whether there is at least one whitespace b/w "#define" and
first opening parenthesis.
Signed-off-by: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We can now designate reviewers in the MAINTAINERS file with the new
"R:" tag, so this commit teaches get_maintainers.pl to add their
email addresses.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Russell writes:
These updates fix one bug in the component helper where the matched
components are not properly cleaned up when the master fails to bind.
I'll provide a version of this for stable trees if it's deemed that
we need to backport it.
The second patch causes the component helper to ignore duplicate
matches when adding components - this is something that was originally
needed for imx-drm, but since that has now been updated, we no longer
need to skip over a component which has already been matched.
The final patch starts the process of updating the component helper
API to achieve two goals: to allow the API to be more efficient when
deferred probing occurs, and to allow for future improvements to the
component helper without having a major impact on the users.
This represents groundwork for some other changes; once this has been
merged, I will then send two further pull requests (one for the staging
tree, and one for the DRM tree) to update the drivers to the new API.
This will result in these three commits being shared with those trees.
Pull MIPS fixes from Ralf Baechle:
"This is dominated by a large number of changes necessary for the MIPS
BPF code. code. Aside of that there are
- a fix for the MSC system controller support code.
- a Turbochannel fix.
- a recordmcount fix that's MIPS-specific.
- barrier fixes to smp-cps / pm-cps after unrelated changes elsewhere
in the kernel.
- revert support for MSA registers in the signal frames. The
reverted patch did modify the signal stack frame which of course is
inacceptable.
- fix math-emu build breakage with older compilers.
- some related cleanup.
- fix Lasat build error if CONFIG_CRC32 isn't set to y by the user"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (27 commits)
MIPS: Lasat: Fix build error if CRC32 is not enabled.
TC: Handle device_register() errors.
MIPS: MSC: Prevent out-of-bounds writes to MIPS SC ioremap'd region
MIPS: bpf: Fix stack space allocation for BPF memwords on MIPS64
MIPS: BPF: Use 32 or 64-bit load instruction to load an address to register
MIPS: bpf: Fix PKT_TYPE case for big-endian cores
MIPS: BPF: Prevent kernel fall over for >=32bit shifts
MIPS: bpf: Drop update_on_xread and always initialize the X register
MIPS: bpf: Fix is_range() semantics
MIPS: bpf: Use pr_debug instead of pr_warn for unhandled opcodes
MIPS: bpf: Fix return values for VLAN_TAG_PRESENT case
MIPS: bpf: Use correct mask for VLAN_TAG case
MIPS: bpf: Fix branch conditional for BPF_J{GT/GE} cases
MIPS: bpf: Add SEEN_SKB to flags when looking for the PKT_TYPE
MIPS: bpf: Use 'andi' instead of 'and' for the VLAN cases
MIPS: bpf: Return error code if the offset is a negative number
MIPS: bpf: Use the LO register to get division's quotient
MIPS: mm: uasm: Fix lh micro-assembler instruction
MIPS: uasm: Add SLT uasm instruction
MIPS: uasm: Add s3s1s2 instruction builder
...
On MIPS calls to _mcount in modules generate 2 instructions to load
the _mcount address (and therefore 2 relocations). The mcount_loc
table should only reference the first of these, so the second is
filtered out by checking the relocation offset and ignoring ones that
immediately follow the previous one seen.
However if a module has an _mcount call at offset 0, the second
relocation would not be filtered out due to old_r_offset == 0
being taken to mean that the current relocation is the first one
seen, and both would end up in the mcount_loc table.
This results in ftrace_make_nop() patching both (adjacent)
instructions to branches over the _mcount call sequence like so:
0xffffffffc08a8000: 04 00 00 10 b 0xffffffffc08a8014
0xffffffffc08a8004: 04 00 00 10 b 0xffffffffc08a8018
0xffffffffc08a8008: 2d 08 e0 03 move at,ra
...
The second branch is in the delay slot of the first, which is
defined to be unpredictable - on the platform on which this bug was
encountered, it triggers a reserved instruction exception.
Fix by initializing old_r_offset to ~0 and using that instead of 0
to determine whether the current relocation is the first seen.
Signed-off-by: Alex Smith <alex.smith@imgtec.com>
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/7098/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The previous patch had a few too many false positives on styles that
should be acceptable.
Signed-off-by: Joe Perches <joe@perches.com>
Tested-by: Anish Bhatt <anish@chelsio.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
devm_request_and_ioremap() was obsoleted by the commit 7509657
("lib: devres: Introduce devm_ioremap_resource()") and has been
deprecated for a long time. So, let's remove this function.
In addition, all usages of devm_request_and_ioremap() are also
removed.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The kernel headers package (linux-headers) doesn't include several
header files required to build out-of-tree modules.
It makes the package unusable on e.g. ARM architecture:
/usr/src/linux-headers-3.14.0/arch/arm/include/asm/memory.h:24:25:
fatal error: mach/memory.h: No such file or directory
#include <mach/memory.h>
^
compilation terminated.
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Reviewed-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Commit 7e1c0477 (kbuild: Use relative path for $(objtree)) assumes that
the build process does not change its working directory. make tar-pkg
was a couterexample, fix this by changing directory only for the tar
command and not for the whole script, which at one point references the
now relative $(objtree).
Reported-and-tested-by: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
When $srctree or $objtree are relative paths, we cannot change directory
and refer to them in the same subshell. Do the redirection outside of
the subshell to fix this.
Reported-and-tested-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Files added to hostprogs-y are cleaned. (See scripts/Makefile.clean)
Adding them to clean-files is redundant.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Pull kbuild misc updates from Michal Marek:
"This is the non-critical part of kbuild for v3.16-rc1:
- make deb-pkg can do s390x and arm64
- new patterns in scripts/tags.sh
- scripts/tags.sh skips userspace tools' sources (which sometimes
have copies of kernel structures) and symlinks
- improvements to the objdiff tool
- two new coccinelle patches
- other minor fixes"
* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
scripts: objdiff: support directories for the augument of record command
scripts: objdiff: fix a comment
scripts: objdiff: change the extension of disassembly from .o to .dis
scripts: objdiff: improve path flexibility for record command
scripts: objdiff: remove unnecessary code
scripts: objdiff: direct error messages to stderr
scripts: objdiff: get the path to .tmp_objdiff more simply
deb-pkg: Add automatic support for s390x architecture
coccicheck: Add unneeded return variable test
kbuild: Fix a typo in documentation
kbuild: trivial - use tabs for code indent where possible
kbuild: trivial - remove trailing empty lines
coccinelle: Check for missing NULL terminators in of_device_id tables
scripts/tags.sh: ignore symlink'ed source files
scripts/tags.sh: add regular expression replacement pattern for memcg
builddeb: add arm64 in the supported architectures
builddeb: use $OBJCOPY variable instead of objcopy
scripts/tags.sh: ignore code of user space tools
scripts/tags.sh: add pattern for DEFINE_HASHTABLE
.gitignore: ignore Module.symvers in all directories
Pull kbuild updates from Michal Marek:
"Kbuild changes for v3.16-rc1:
- cross-compilation fix so that cc-option is testing the right
compiler
- Fix for make defconfig all
- Using relative paths to the object and source directory where
possible, plus fixes for the fallout of the change
- several cleanups in the Makefiles and scripts
The powerpc fix is from today, because it was only discovered
recently. The rest has been in linux-next for some time"
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
powerpc: Avoid circular dependency with zImage.%
kbuild: create include/config directory in scripts/kconfig/Makefile
kbuild: do not create include/linux directory
Makefile: Fix unrecognized cross-compiler command line options
kbuild: do not add "selinux" to subdir- twice
um: Fix for relative objtree when generating x86 headers
kbuild: Use relative path when building in a subdir of the source tree
kbuild: Use relative path when building in the source tree
kbuild: Use relative path for $(objtree)
firmware: Use $(quote) in the Makefile
firmware: Simplify directory creation
kbuild: trivial - fix comment block indent
kbuild: trivial - remove trailing spaces
kbuild: support simultaneous "make %config" and "make all"
kbuild: move extra gcc checks to scripts/Makefile.extrawarn
re-add the perm check (we unified the module param and sysfs checks, but
the module ones were stronger so we weakened them temporarily).
Param parsing gets documented, and also "--" now forces args to be
handed to init (and ignored by the kernel).
Module NX/RO protections get tightened: we now set them before calling
parse_args().
Cheers,
Rusty.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=IxSN
-----END PGP SIGNATURE-----
Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull module updates from Rusty Russell:
"Most of this is cleaning up various driver sysfs permissions so we can
re-add the perm check (we unified the module param and sysfs checks,
but the module ones were stronger so we weakened them temporarily).
Param parsing gets documented, and also "--" now forces args to be
handed to init (and ignored by the kernel).
Module NX/RO protections get tightened: we now set them before calling
parse_args()"
* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
module: set nx before marking module MODULE_STATE_COMING.
samples/kobject/: avoid world-writable sysfs files.
drivers/hid/hid-picolcd_fb: avoid world-writable sysfs files.
drivers/staging/speakup/: avoid world-writable sysfs files.
drivers/regulator/virtual: avoid world-writable sysfs files.
drivers/scsi/pm8001/pm8001_ctl.c: avoid world-writable sysfs files.
drivers/hid/hid-lg4ff.c: avoid world-writable sysfs files.
drivers/video/fbdev/sm501fb.c: avoid world-writable sysfs files.
drivers/mtd/devices/docg3.c: avoid world-writable sysfs files.
speakup: fix incorrect perms on speakup_acntsa.c
cpumask.h: silence warning with -Wsign-compare
Documentation: Update kernel-parameters.tx
param: hand arguments after -- straight to init
modpost: Fix resource leak in read_dump()
Right now when people try to report issues in the kernel they send stack
dumps to eachother, which looks something like this:
[ 6.906437] [<ffffffff811f0e90>] ? backtrace_test_irq_callback+0x20/0x20
[ 6.907121] [<ffffffff84388ce8>] dump_stack+0x52/0x7f
[ 6.907640] [<ffffffff811f0ec8>] backtrace_regression_test+0x38/0x110
[ 6.908281] [<ffffffff813596a0>] ? proc_create_data+0xa0/0xd0
[ 6.908870] [<ffffffff870a8040>] ? proc_modules_init+0x22/0x22
[ 6.909480] [<ffffffff810020c2>] do_one_initcall+0xc2/0x1e0
[...]
However, most of the text you get is pure garbage.
The only useful thing above is the function name. Due to the amount of
different kernel code versions and various configurations being used,
the kernel address and the offset into the function are not really
helpful in determining where the problem actually occured.
Too often the result of someone looking at a stack dump is asking the
person who sent it for a translation for one or more 'addr2line'
translations. Which slows down the entire process of debugging the
issue (and really annoying).
The decode_stacktrace script is an attempt to make the output more
useful and easy to work with by translating all kernel addresses in the
stack dump into line numbers. Which means that the stack dump would
look like this:
[ 635.148361] dump_stack (lib/dump_stack.c:52)
[ 635.149127] warn_slowpath_common (kernel/panic.c:418)
[ 635.150214] warn_slowpath_null (kernel/panic.c:453)
[ 635.151031] _oalloc_pages_slowpath+0x6a/0x7d0
[ 635.152171] ? zone_watermark_ok (mm/page_alloc.c:1728)
[ 635.152988] ? get_page_from_freelist (mm/page_alloc.c:1939)
[ 635.154766] __alloc_pages_nodemask (mm/page_alloc.c:2766)
It's pretty obvious why this is better than the previous stack dump
before.
Usage is pretty simple:
./decode_stacktrace.sh [vmlinux] [base path]
Where vmlinux is the vmlinux to extract line numbers from and base path
is the path that points to the root of the build tree, for example:
./decode_stacktrace.sh vmlinux /home/sasha/linux/ < input.log > output.log
The stack trace should be piped through it (I, for example, just pipe
the output of the serial console of my KVM test box through it).
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For example,
$ scripts/objdiff record init drivers/usb
disassembles all the objects under init and drivers/usb directories.
This feature would be useful when we change various files under the
specific directory.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Prior to this commit, the command "scripts/objdiff record path/to/*.o"
disassembled the given object into ".tmp_objdiff/path/to/*.o" file.
The problem here is that recorded disassemblies are lost if we run
"make clean" because it removes all the *.o files.
Disassembled code should be dumped into *.dis instead of *.o files.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Prior to this commit, scripts/objdiff expected to be run at the top
directory and only the relative path of objects.
This commit provides more flexibility in terms of object path:
[1] scripts/objdiff can be run in any directory
For example,
$ scripts/objdiff record init/main.o
and
$ cd init; ../scripts/objdiff record main.o
produce the same result.
[2] Support absolute path for objects
$ scripts/objdiff record /home/foo/bar/linux/init/main.o
work as well.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The directories for objdump is created by the code
a few lines below:
[ ! -d "$OBJDIFFD/$dn" ] && mkdir -p "$OBJDIFFD/$dn"
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
This commit is a minor refactoring.
Temporary files for objdiff are stored in .tmp_objdiff directory
which is located at the top directory.
To get the path to this directory,
SRCTREE=`git rev-parse --show-toplevel`
TMPD=$SRCTREE/.tmp_objdiff
seems easier to understand than
GIT_DIR=`git rev-parse --git-dir`
TMPD=${GIT_DIR%git}tmp_objdiff
Besides, it is not always necessary to create .tmp_objdiff dicrectory.
It should be created only for "record" command.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The Debian s390x architecture has 64-bit userland whereas s390 has
32-bit userland. A 64-bit kernel can be used with either. Now that
Debian supports multiarch and officially supports s390x, it makes more
sense to assign a 64-bit kernel package to s390x.
Reported-by: Stephen Powell <zlinuxman@wowway.com>
References: https://bugs.debian.org/750925
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Michal Marek <mmarek@suse.cz>
This semantic patch looks for variables that are initialized with a
constant, are never updated, and are only used as parameter of return.
Return the constant instead of using a variable.
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The directory include/config is used only for
silentoldconfig, localmodconfig, localyesconfig.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Failure to terminate an of_device_id table can lead to confusing
failures depending on where the compiler places the array. Add a
check to make sure these tables are terminated. Thanks to Mitchel
Humpherys for coming up with the pattern initially.
Cc: Mitchel Humpherys <mitchelh@codeaurora.org>
Cc: Gilles Muller <Gilles.Muller@lip6.fr>
Cc: Nicolas Palix <nicolas.palix@imag.fr>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Masahiro Yamada
Linus Torvalds
Rafael J. Wysocki
Todd E Brandt
Josh Triplett
Vivek Goyal
Konstantin Khlebnikov
Catalin Marinas
Fabian Frederick
Michal Marek
Joe Perches
Dan Carpenter
Rasmus Villemoes
Himangi Saraogi
Behan Webster
Michal Nazarewicz
Greg Kroah-Hartman
James Morris
Ingo Molnar
Horia Geanta
Alex Smith
Jingoo Han
Olaf Hering
Fathi Boudra
Sasha Levin
Ben Hutchings
Peter Senna Tschudin
Stephen Boyd