Граф коммитов

32 Коммитов

Автор SHA1 Сообщение Дата
Eric W. Biederman 4c376dcae8 userns: Convert struct dquot dq_id to be a struct kqid
Change struct dquot dq_id to a struct kqid and remove the now
unecessary dq_type.

Make minimal changes to dquot, quota_tree, quota_v1, quota_v2, ext3,
ext4, and ocfs2 to deal with the change in quota structures and
signatures.  The ocfs2 changes are larger than most because of the
extensive tracing throughout the ocfs2 quota code that prints out
dq_id.

quota_tree.c:get_index is modified to take a struct kqid instead of a
qid_t because all of it's callers pass in dquot->dq_id and it allows
me to introduce only a single conversion.

The rest of the changes are either just replacing dq_type with dq_id.type,
adding conversions to deal with the change in type and occassionally
adding qid_eq to allow quota id comparisons in a user namespace safe way.

Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Theodore Tso <tytso@mit.edu>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-09-18 01:01:41 -07:00
Eric W. Biederman aca645a6a5 userns: Modify dqget to take struct kqid
Modify dqget to take struct kqid instead of a type and an identifier
pair.

Modify the callers of dqget in ocfs2 and dquot to take generate
a struct kqid so they can continue to call dqget.  The conversion
to create struct kqid should all be the final conversions that
are needed in those code paths.

Cc: Jan Kara <jack@suse.cz>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-09-18 01:01:40 -07:00
Akinobu Mita 939255798a ocfs2: avoid unaligned access to dqc_bitmap
The dqc_bitmap field of struct ocfs2_local_disk_chunk is 32-bit aligned,
but not 64-bit aligned.  The dqc_bitmap is accessed by ocfs2_set_bit(),
ocfs2_clear_bit(), ocfs2_test_bit(), or ocfs2_find_next_zero_bit().  These
are wrapper macros for ext2_*_bit() which need to take an unsigned long
aligned address (though some architectures are able to handle unaligned
address correctly)

So some 64bit architectures may not be able to access the dqc_bitmap
correctly.

This avoids such unaligned access by using another wrapper functions for
ext2_*_bit().  The code is taken from fs/ext4/mballoc.c which also need to
handle unaligned bitmap access.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
2011-12-01 14:39:32 -08:00
Sunil Mushran 619c200de1 ocfs2: Clean up messages in the fs
Convert useful messages from ML_NOTICE to KERN_NOTICE to improve readability.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
2011-07-24 10:34:54 -07:00
Tao Ma 38877a4379 ocfs2: Remove mlog(0) from quota_local.c.
Remove mlog(0) from fs/ocfs2/quota_local.c.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
2011-02-23 22:12:48 +08:00
Tao Ma c1e8d35ef5 ocfs2: Remove EXIT from masklog.
mlog_exit is used to record the exit status of a function.
But because it is added in so many functions, if we enable it,
the system logs get filled up quickly and cause too much I/O.
So actually no one can open it for a production system or even
for a test.

This patch just try to remove it or change it. So:
1. if all the error paths already use mlog_errno, it is just removed.
   Otherwise, it will be replaced by mlog_errno.
2. if it is used to print some return value, it is replaced with
   mlog(0,...).
mlog_exit_ptr is changed to mlog(0.
All those mlog(0,...) will be replaced with trace events later.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
2011-03-07 16:43:21 +08:00
Tao Ma ef6b689b63 ocfs2: Remove ENTRY from masklog.
ENTRY is used to record the entry of a function.
But because it is added in so many functions, if we enable it,
the system logs get filled up quickly and cause too much I/O.
So actually no one can open it for a production system or even
for a test.

So for mlog_entry_void, we just remove it.
for mlog_entry(...), we replace it with mlog(0,...), and they
will be replace by trace event later.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
2011-02-21 11:10:44 +08:00
Joel Becker 5693486bad ocfs2: Zero the tail cluster when extending past i_size.
ocfs2's allocation unit is the cluster.  This can be larger than a block
or even a memory page.  This means that a file may have many blocks in
its last extent that are beyond the block containing i_size.  There also
may be more unwritten extents after that.

When ocfs2 grows a file, it zeros the entire cluster in order to ensure
future i_size growth will see cleared blocks.  Unfortunately,
block_write_full_page() drops the pages past i_size.  This means that
ocfs2 is actually leaking garbage data into the tail end of that last
cluster.  This is a bug.

We adjust ocfs2_write_begin_nolock() and ocfs2_extend_file() to detect
when a write or truncate is past i_size.  They will use
ocfs2_zero_extend() to ensure the data is properly zeroed.

Older versions of ocfs2_zero_extend() simply zeroed every block between
i_size and the zeroing position.  This presumes three things:

1) There is allocation for all of these blocks.
2) The extents are not unwritten.
3) The extents are not refcounted.

(1) and (2) hold true for non-sparse filesystems, which used to be the
only users of ocfs2_zero_extend().  (3) is another bug.

Since we're now using ocfs2_zero_extend() for sparse filesystems as
well, we teach ocfs2_zero_extend() to check every extent between
i_size and the zeroing position.  If the extent is unwritten, it is
ignored.  If it is refcounted, it is CoWed.  Then it is zeroed.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Cc: stable@kernel.org
2010-07-08 13:25:35 -07:00
Jan Kara c06bcbfa1e ocfs2: Fix lock inversion in quotas during umount
We cannot cancel delayed work from ocfs2_local_free_info because that is called
with dqonoff_mutex held and the work it cancels requires dqonoff_mutex to
finish. Cancel the work before acquiring dqonoff_mutex.

Acked-by: Joel Becker <Joel.Becker@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-21 19:30:48 +02:00
Jan Kara 741e128933 ocfs2: Fix NULL pointer deref when writing local dquot
commit_dqblk() can write quota info to global file. That is actually a bad
thing to do because if we are just modifying local quota file, we are not
prepared (do not hold proper locks, do not have transaction credits) to do
a modification of the global quota file. So do not use commit_dqblk() and
instead call our writing function directly.

Acked-by: Joel Becker <Joel.Becker@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-21 19:30:48 +02:00
Jan Kara fb8dd8d780 ocfs2: Fix quota locking
OCFS2 had three issues with quota locking:
a) When reading dquot from global quota file, we started a transaction while
   holding dqio_mutex which is prone to deadlocks because other paths do it
   the other way around
b) During ocfs2_sync_dquot we were not protected against concurrent writers
   on the same node. Because we first copy data to local buffer, a race
   could happen resulting in old data being written to global quota file and
   thus causing quota inconsistency after a crash.
c) ip_alloc_sem of quota files was acquired while a transaction is started
   in ocfs2_quota_write which can deadlock because we first get ip_alloc_sem
   and then start a transaction when extending quota files.

We fix the problem a) by pulling all necessary code to ocfs2_acquire_dquot
and ocfs2_release_dquot. Thus we no longer depend on generic dquot_acquire
to do the locking and can force proper lock ordering.

Problems b) and c) are fixed by locking i_mutex and ip_alloc_sem of
global quota file in ocfs2_lock_global_qf and removing ip_alloc_sem from
ocfs2_quota_read and ocfs2_quota_write.

Acked-by: Joel Becker <Joel.Becker@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-21 19:30:47 +02:00
Jan Kara ae4f6ef134 ocfs2: Avoid unnecessary block mapping when refreshing quota info
The position of global quota file info does not change. So we do not have
to do logical -> physical block translation every time we reread it from
disk. Thus we can also avoid taking ip_alloc_sem.

Acked-by: Joel Becker <Joel.Becker@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-21 19:30:46 +02:00
Jan Kara f64dd44eb7 ocfs2: Do not map blocks from local quota file on each write
There is no need to map offset of local dquot structure to on disk block
in each quota write. It is enough to map it just once and store the physical
block number in quota structure in memory. Moreover this simplifies locking
as we do not have to take ip_alloc_sem from quota write path.

Acked-by: Joel Becker <Joel.Becker@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-21 19:30:46 +02:00
Linus Torvalds 03e62303cf Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: (47 commits)
  ocfs2: Silence a gcc warning.
  ocfs2: Don't retry xattr set in case value extension fails.
  ocfs2:dlm: avoid dlm->ast_lock lockres->spinlock dependency break
  ocfs2: Reset xattr value size after xa_cleanup_value_truncate().
  fs/ocfs2/dlm: Use kstrdup
  fs/ocfs2/dlm: Drop memory allocation cast
  Ocfs2: Optimize punching-hole code.
  Ocfs2: Make ocfs2_find_cpos_for_left_leaf() public.
  Ocfs2: Fix hole punching to correctly do CoW during cluster zeroing.
  Ocfs2: Optimize ocfs2 truncate to use ocfs2_remove_btree_range() instead.
  ocfs2: Block signals for mkdir/link/symlink/O_CREAT.
  ocfs2: Wrap signal blocking in void functions.
  ocfs2/dlm: Increase o2dlm lockres hash size
  ocfs2: Make ocfs2_extend_trans() really extend.
  ocfs2/trivial: Code cleanup for allocation reservation.
  ocfs2: make ocfs2_adjust_resv_from_alloc simple.
  ocfs2: Make nointr a default mount option
  ocfs2/dlm: Make o2dlm domain join/leave messages KERN_NOTICE
  o2net: log socket state changes
  ocfs2: print node # when tcp fails
  ...
2010-05-21 07:20:17 -07:00
Joel Becker ec20cec7a3 ocfs2: Make ocfs2_journal_dirty() void.
jbd[2]_journal_dirty_metadata() only returns 0.  It's been returning 0
since before the kernel moved to git.  There is no point in checking
this error.

ocfs2_journal_dirty() has been faithfully returning the status since the
beginning.  All over ocfs2, we have blocks of code checking this can't
fail status.  In the past few years, we've tried to avoid adding these
checks, because they are pointless.  But anyone who looks at our code
assumes they are needed.

Finally, ocfs2_journal_dirty() is made a void function.  All error
checking is removed from other files.  We'll BUG_ON() the status of
jbd2_journal_dirty_metadata() just in case they change it someday.  They
won't.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-05-05 18:17:29 -07:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Akinobu Mita 984b3f5746 bitops: rename for_each_bit() to for_each_set_bit()
Rename for_each_bit to for_each_set_bit in the kernel source tree.  To
permit for_each_clear_bit(), should that ever be added.

The patch includes a macro to map the old for_each_bit() onto the new
for_each_set_bit().  This is a (very) temporary thing to ease the migration.

[akpm@linux-foundation.org: add temporary for_each_bit()]
Suggested-by: Alexey Dobriyan <adobriyan@gmail.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Artem Bityutskiy <dedekind@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 11:26:23 -08:00
Alexey Dobriyan 1472da5fdc const: struct quota_format_ops
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2009-12-10 15:02:51 +01:00
Joel Becker 0cf2f7632b ocfs2: Pass struct ocfs2_caching_info to the journal functions.
The next step in divorcing metadata I/O management from struct inode is
to pass struct ocfs2_caching_info to the journal functions.  Thus the
journal locks a metadata cache with the cache io_lock function.  It also
can compare ci_last_trans and ci_created_trans directly.

This is a large patch because of all the places we change
ocfs2_journal_access..(handle, inode, ...) to
ocfs2_journal_access..(handle, INODE_CACHE(inode), ...).

Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-09-04 16:07:50 -07:00
Joel Becker 8cb471e8f8 ocfs2: Take the inode out of the metadata read/write paths.
We are really passing the inode into the ocfs2_read/write_blocks()
functions to get at the metadata cache.  This commit passes the cache
directly into the metadata block functions, divorcing them from the
inode.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-09-04 16:07:48 -07:00
Jan Kara 0584974a77 ocfs2: Define credit counts for quota operations
Numbers of needed credits for some quota operations were written
as raw numbers. Create appropriate defines instead.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-07-23 10:59:31 -07:00
Jan Kara 0e7f387bf3 ocfs2: Initialize blocks allocated to local quota file
When we extend local quota file, we should initialize data
in newly allocated block. Firstly because on recovery we could
parse bogus data, secondly so that block checksums are properly
computed.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-07-23 10:59:11 -07:00
Jan Kara 4b3fa1904c ocfs2: Mark buffer uptodate before calling ocfs2_journal_access_dq()
In a code path extending local quota files we marked new header
buffer uptodate only after calling ocfs2_journal_access_dq() which
triggers a bug. Fix it and also call ocfs2 variant of the function
marking buffer uptodate.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-07-23 10:59:05 -07:00
Jan Kara 80d73f15d1 ocfs2: Fix possible deadlock in quota recovery
In ocfs2_finish_quota_recovery() we acquired global quota file lock and started
recovering local quota file. During this process we need to get quota
structures, which calls ocfs2_dquot_acquire() which gets global quota file lock
again. This second lock can block in case some other node has requested the
quota file lock in the mean time. Fix the problem by moving quota file locking
down into the function where it is really needed.  Then dqget() or dqput()
won't be called with the lock held.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-06-03 19:14:30 -07:00
Jan Kara b4c30de39a ocfs2: Fix lock inversion in ocfs2_local_read_info()
This function is called with dqio_mutex held but it has to acquire lock
from global quota file which ranks above this lock. This is not deadlockable
lock inversion since this code path is take only during mount when noone
else can race with us but let's clean this up to silence lockdep.

We just drop the dqio_mutex in the beginning of the function and reacquire
it in the end since we don't need it - noone can race with us at this moment.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-06-03 19:14:29 -07:00
Joel Becker 13723d00e3 ocfs2: Use metadata-specific ocfs2_journal_access_*() functions.
The per-metadata-type ocfs2_journal_access_*() functions hook up jbd2
commit triggers and allow us to compute metadata ecc right before the
buffers are written out.  This commit provides ecc for inodes, extent
blocks, group descriptors, and quota blocks.  It is not safe to use
extened attributes and metaecc at the same time yet.

The ocfs2_extent_tree and ocfs2_path abstractions in alloc.c both hide
the type of block at their root.  Before, it didn't matter, but now the
root block must use the appropriate ocfs2_journal_access_*() function.
To keep this abstract, the structures now have a pointer to the matching
journal_access function and a wrapper call to call it.

A few places use naked ocfs2_write_block() calls instead of adding the
blocks to the journal.  We make sure to calculate their checksum and ecc
before the write.

Since we pass around the journal_access functions.  Let's typedef them
in ocfs2.h.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:32 -08:00
Tao Ma df32b3343a ocfs2/quota: sparse fixes for quota
Fix 2 minor things in quota. They are both found by sparse check.
1. an endian bug in ocfs2_local_quota_add_chunk.
2. change olq_alloc_dquot to static.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:26 -08:00
Jan Kara 9a2f3866c8 ocfs2: Fix build warnings (64-bit types vs long long)
fs/ocfs2/quota_local.c: In function 'olq_set_dquot':
fs/ocfs2/quota_local.c:844: warning: format '%lld' expects type 'long long int', but argument 7 has type '__le64'
fs/ocfs2/quota_local.c:844: warning: format '%lld' expects type 'long long int', but argument 8 has type '__le64'
fs/ocfs2/quota_local.c:844: warning: format '%lld' expects type 'long long int', but argument 7 has type '__le64'
fs/ocfs2/quota_local.c:844: warning: format '%lld' expects type 'long long int', but argument 8 has type '__le64'
fs/ocfs2/quota_local.c:844: warning: format '%lld' expects type 'long long int', but argument 7 has type '__le64'
fs/ocfs2/quota_local.c:844: warning: format '%lld' expects type 'long long int', but argument 8 has type '__le64'
fs/ocfs2/quota_global.c: In function '__ocfs2_sync_dquot':
fs/ocfs2/quota_global.c:457: warning: format '%lld' expects type 'long long int', but argument 8 has type 's64'
fs/ocfs2/quota_global.c:457: warning: format '%lld' expects type 'long long int', but argument 10 has type 's64'
fs/ocfs2/quota_global.c:457: warning: format '%lld' expects type 'long long int', but argument 8 has type 's64'
fs/ocfs2/quota_global.c:457: warning: format '%lld' expects type 'long long int', but argument 10 has type 's64'
fs/ocfs2/quota_global.c:457: warning: format '%lld' expects type 'long long int', but argument 8 has type 's64'
fs/ocfs2/quota_global.c:457: warning: format '%lld' expects type 'long long int', but argument 10 has type 's64'

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:25 -08:00
Joel Becker 85eb8b73d6 ocfs2: Fix ocfs2_read_quota_block() error handling.
ocfs2_bread() has become ocfs2_read_virt_blocks(), with a prototype to
match ocfs2_read_blocks().  The quota code, converting from
ocfs2_bread(), wraps the call to ocfs2_read_virt_blocks() in
ocfs2_read_quota_block().  Unfortunately, the prototype of
ocfs2_read_quota_block() matches the old prototype of ocfs2_bread().

The problem is that ocfs2_bread() returned the buffer head, and callers
assumed that a NULL pointer was indicative of error.  It wasn't.  This
is why ocfs2_bread() took an int*err argument as well.

The new prototype of ocfs2_read_virt_blocks() avoids this error handling
confusion.  Let's change ocfs2_read_quota_block() to match.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:24 -08:00
Jan Kara 2205363dce ocfs2: Implement quota recovery
Implement functions for recovery after a crash. Functions just
read local quota file and sync info to global quota file.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:24 -08:00
Mark Fasheh 171bf93ce1 ocfs2: Periodic quota syncing
This patch creates a work queue for periodic syncing of locally cached quota
information to the global quota files. We constantly queue a delayed work
item, to get the periodic behavior.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Acked-by: Jan Kara <jack@suse.cz>
2009-01-05 08:40:24 -08:00
Jan Kara 9e33d69f55 ocfs2: Implementation of local and global quota file handling
For each quota type each node has local quota file. In this file it stores
changes users have made to disk usage via this node. Once in a while this
information is synced to global file (and thus with other nodes) so that
limits enforcement at least aproximately works.

Global quota files contain all the information about usage and limits. It's
mostly handled by the generic VFS code (which implements a trie of structures
inside a quota file). We only have to provide functions to convert structures
from on-disk format to in-memory one. We also have to provide wrappers for
various quota functions starting transactions and acquiring necessary cluster
locks before the actual IO is really started.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:23 -08:00