Граф коммитов

1839 Коммитов

Автор SHA1 Сообщение Дата
Xiubo Li 3b20bc2fe4 ceph: noacl mount option is effectively ignored
For the old mount API, the module parameters parseing function will
be called in ceph_mount() and also just after the default posix acl
flag set, so we can control to enable/disable it via the mount option.

But for the new mount API, it will call the module parameters
parseing function before ceph_get_tree(), so the posix acl will always
be enabled.

Fixes: 82995cc6c5 ("libceph, rbd, ceph: convert to use the new mount API")
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-02-11 17:04:40 +01:00
Ilya Dryomov b27a939e83 ceph: canonicalize server path in place
syzbot reported that 4fbc0c711b ("ceph: remove the extra slashes in
the server path") had caused a regression where an allocation could be
done under a spinlock -- compare_mount_options() is called by sget_fc()
with sb_lock held.

We don't really need the supplied server path, so canonicalize it
in place and compare it directly.  To make this work, the leading
slash is kept around and the logic in ceph_real_mount() to skip it
is restored.  CEPH_MSG_CLIENT_SESSION now reports the same (i.e.
canonicalized) path, with the leading slash of course.

Fixes: 4fbc0c711b ("ceph: remove the extra slashes in the server path")
Reported-by: syzbot+98704a51af8e3d9425a9@syzkaller.appspotmail.com
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
2020-02-11 17:04:40 +01:00
Xiubo Li 8e4473bb50 ceph: do not execute direct write in parallel if O_APPEND is specified
In O_APPEND & O_DIRECT mode, the data from different writers will
be possibly overlapping each other since they take the shared lock.

For example, both Writer1 and Writer2 are in O_APPEND and O_DIRECT
mode:

          Writer1                         Writer2

     shared_lock()                   shared_lock()
     getattr(CAP_SIZE)               getattr(CAP_SIZE)
     iocb->ki_pos = EOF              iocb->ki_pos = EOF
     write(data1)
                                     write(data2)
     shared_unlock()                 shared_unlock()

The data2 will overlap the data1 from the same file offset, the
old EOF.

Switch to exclusive lock instead when O_APPEND is specified.

Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-02-11 17:04:04 +01:00
Linus Torvalds c9d35ee049 Merge branch 'merge.nfs-fs_parse.1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs file system parameter updates from Al Viro:
 "Saner fs_parser.c guts and data structures. The system-wide registry
  of syntax types (string/enum/int32/oct32/.../etc.) is gone and so is
  the horror switch() in fs_parse() that would have to grow another case
  every time something got added to that system-wide registry.

  New syntax types can be added by filesystems easily now, and their
  namespace is that of functions - not of system-wide enum members. IOW,
  they can be shared or kept private and if some turn out to be widely
  useful, we can make them common library helpers, etc., without having
  to do anything whatsoever to fs_parse() itself.

  And we already get that kind of requests - the thing that finally
  pushed me into doing that was "oh, and let's add one for timeouts -
  things like 15s or 2h". If some filesystem really wants that, let them
  do it. Without somebody having to play gatekeeper for the variants
  blessed by direct support in fs_parse(), TYVM.

  Quite a bit of boilerplate is gone. And IMO the data structures make a
  lot more sense now. -200LoC, while we are at it"

* 'merge.nfs-fs_parse.1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (25 commits)
  tmpfs: switch to use of invalfc()
  cgroup1: switch to use of errorfc() et.al.
  procfs: switch to use of invalfc()
  hugetlbfs: switch to use of invalfc()
  cramfs: switch to use of errofc() et.al.
  gfs2: switch to use of errorfc() et.al.
  fuse: switch to use errorfc() et.al.
  ceph: use errorfc() and friends instead of spelling the prefix out
  prefix-handling analogues of errorf() and friends
  turn fs_param_is_... into functions
  fs_parse: handle optional arguments sanely
  fs_parse: fold fs_parameter_desc/fs_parameter_spec
  fs_parser: remove fs_parameter_description name field
  add prefix to fs_context->log
  ceph_parse_param(), ceph_parse_mon_ips(): switch to passing fc_log
  new primitive: __fs_parse()
  switch rbd and libceph to p_log-based primitives
  struct p_log, variants of warnf() et.al. taking that one instead
  teach logfc() to handle prefices, give it saner calling conventions
  get rid of cg_invalf()
  ...
2020-02-08 13:26:41 -08:00
Al Viro d53d0f7461 ceph: use errorfc() and friends instead of spelling the prefix out
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-02-07 14:48:39 -05:00
Al Viro 48ce73b1be fs_parse: handle optional arguments sanely
Don't bother with "mixed" options that would allow both the
form with and without argument (i.e. both -o foo and -o foo=bar).
Rather than trying to shove both into a single fs_parameter_spec,
allow having with-argument and no-argument specs with the same
name and teach fs_parse to handle that.

There are very few options of that sort, and they are actually
easier to handle that way - callers end up with less postprocessing.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-02-07 14:48:37 -05:00
Al Viro d7167b1499 fs_parse: fold fs_parameter_desc/fs_parameter_spec
The former contains nothing but a pointer to an array of the latter...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-02-07 14:48:37 -05:00
Eric Sandeen 96cafb9ccb fs_parser: remove fs_parameter_description name field
Unused now.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-02-07 14:48:36 -05:00
Al Viro cc3c0b533a add prefix to fs_context->log
... turning it into struct p_log embedded into fs_context.  Initialize
the prefix with fs_type->name, turning fs_parse() into a trivial
inline wrapper for __fs_parse().

This makes fs_parameter_description->name completely unused.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-02-07 14:48:35 -05:00
Al Viro c80c98f0dc ceph_parse_param(), ceph_parse_mon_ips(): switch to passing fc_log
... and now errorf() et.al. are never called with NULL fs_context,
so we can get rid of conditional in those.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-02-07 14:48:34 -05:00
Al Viro 5eede62529 fold struct fs_parameter_enum into struct constant_table
no real difference now

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-02-07 00:12:50 -05:00
Al Viro 2710c957a8 fs_parse: get rid of ->enums
Don't do a single array; attach them to fsparam_enum() entry
instead.  And don't bother trying to embed the names into those -
it actually loses memory, with no real speedup worth mentioning.

Simplifies validation as well.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-02-07 00:12:50 -05:00
Linus Torvalds 4c46bef2e9 We have:
- a set of patches that fixes various corner cases in mount and umount
   code (Xiubo Li).  This has to do with choosing an MDS, distinguishing
   between laggy and down MDSes and parsing the server path.
 
 - inode initialization fixes (Jeff Layton).  The one included here
   mostly concerns things like open_by_handle() and there is another
   one that will come through Al.
 
 - copy_file_range() now uses the new copy-from2 op (Luis Henriques).
   The existing copy-from op turned out to be infeasible for generic
   filesystem use; we disable the copy offload if OSDs don't support
   copy-from2.
 
 - a patch to link "rbd" and "block" devices together in sysfs (Hannes
   Reinecke)
 
 And a smattering of cleanups from Xiubo, Jeff and Chengguang.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAl47PUcTHGlkcnlvbW92
 QGdtYWlsLmNvbQAKCRBKf944AhHzi6LoCACmVli5N6bgnBE4sTixi/jz6aCCbk32
 ZPlKiSesHnOGkY6KXHJT58JYy0paITBRik5ypdz06J8aCOtWyPLbn3uCemF9CYn2
 g6dId2Lf5vGFrgSm4YSiqp9a86IZmYSDG41LbJD/IJWFDWdMWqNPMDqji6yaIO5O
 NJI5N0tk+VFXdV+JyjV9X/FnP1r1D2ReZzz21ZiqTJXSmE8YIkioLjkq36QTMMG7
 Gm5qdlc1x2r4qfzA1g+OiWgRQCUMgkuYerFzus4mVbW4hrphsavH2DArbOwFmsXF
 46hOq+1uGVVyZILLJfKNiktf1GExBF0icbSREJtmjUHbQvNR8BH0C+fV
 =vvIc
 -----END PGP SIGNATURE-----

Merge tag 'ceph-for-5.6-rc1' of https://github.com/ceph/ceph-client

Pull ceph fixes from Ilya Dryomov:

 - a set of patches that fixes various corner cases in mount and umount
   code (Xiubo Li). This has to do with choosing an MDS, distinguishing
   between laggy and down MDSes and parsing the server path.

 - inode initialization fixes (Jeff Layton). The one included here
   mostly concerns things like open_by_handle() and there is another one
   that will come through Al.

 - copy_file_range() now uses the new copy-from2 op (Luis Henriques).
   The existing copy-from op turned out to be infeasible for generic
   filesystem use; we disable the copy offload if OSDs don't support
   copy-from2.

 - a patch to link "rbd" and "block" devices together in sysfs (Hannes
   Reinecke)

... and a smattering of cleanups from Xiubo, Jeff and Chengguang.

* tag 'ceph-for-5.6-rc1' of https://github.com/ceph/ceph-client: (25 commits)
  rbd: set the 'device' link in sysfs
  ceph: move net/ceph/ceph_fs.c to fs/ceph/util.c
  ceph: print name of xattr in __ceph_{get,set}xattr() douts
  ceph: print r_direct_hash in hex in __choose_mds() dout
  ceph: use copy-from2 op in copy_file_range
  ceph: close holes in structs ceph_mds_session and ceph_mds_request
  rbd: work around -Wuninitialized warning
  ceph: allocate the correct amount of extra bytes for the session features
  ceph: rename get_session and switch to use ceph_get_mds_session
  ceph: remove the extra slashes in the server path
  ceph: add possible_max_rank and make the code more readable
  ceph: print dentry offset in hex and fix xattr_version type
  ceph: only touch the caps which have the subset mask requested
  ceph: don't clear I_NEW until inode metadata is fully populated
  ceph: retry the same mds later after the new session is opened
  ceph: check availability of mds cluster on mount after wait timeout
  ceph: keep the session state until it is released
  ceph: add __send_request helper
  ceph: ensure we have a new cap before continuing in fill_inode
  ceph: drop unused ttl_from parameter from fill_inode
  ...
2020-02-06 12:21:01 +00:00
Linus Torvalds bddea11b1b Merge branch 'imm.timestamp' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs timestamp updates from Al Viro:
 "More 64bit timestamp work"

* 'imm.timestamp' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  kernfs: don't bother with timestamp truncation
  fs: Do not overload update_time
  fs: Delete timespec64_trunc()
  fs: ubifs: Eliminate timespec64_trunc() usage
  fs: ceph: Delete timespec64_trunc() usage
  fs: cifs: Delete usage of timespec64_trunc
  fs: fat: Eliminate timespec64_trunc() usage
  utimes: Clamp the timestamps in notify_change()
2020-02-05 05:02:42 +00:00
Jeff Layton 24604f7e2b ceph: move net/ceph/ceph_fs.c to fs/ceph/util.c
All of these functions are only called from CephFS, so move them into
ceph.ko, and drop the exports.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-01-27 16:53:40 +01:00
Jeff Layton d36e0b620a ceph: print name of xattr in __ceph_{get,set}xattr() douts
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-01-27 16:53:40 +01:00
Xiubo Li 3c802092da ceph: print r_direct_hash in hex in __choose_mds() dout
It's hard to read, especially when it is:

  ceph:  __choose_mds 00000000b7bc9c15 is_hash=1 (-271041095) mode 0

At the same time, switch to __func__ to get rid of the checkpatch
warning.

Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-01-27 16:53:40 +01:00
Luis Henriques 78beb0ff2f ceph: use copy-from2 op in copy_file_range
Instead of using the copy-from operation, switch copy_file_range to the
new copy-from2 operation, which allows to send the truncate_seq and
truncate_size parameters.

If an OSD does not support the copy-from2 operation it will return
-EOPNOTSUPP.  In that case, the kernel client will stop trying to do
remote object copies for this fs client and will always use the generic
VFS copy_file_range.

Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-01-27 16:53:40 +01:00
Jeff Layton 045100cd79 ceph: close holes in structs ceph_mds_session and ceph_mds_request
Move s_ref up to plug a 4 byte hole, which plugs another.
Move r_kref to shave 8 bytes off per request on x86_64.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-01-27 16:53:40 +01:00
Xiubo Li 9ba1e22453 ceph: allocate the correct amount of extra bytes for the session features
The total bytes may potentially be larger than 8.

Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-01-27 16:53:40 +01:00
Xiubo Li 5b3248c677 ceph: rename get_session and switch to use ceph_get_mds_session
Just in case the session's refcount reach 0 and is releasing, and
if we get the session without checking it, we may encounter kernel
crash.

Rename get_session to ceph_get_mds_session and make it global.

Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-01-27 16:53:40 +01:00
Xiubo Li 4fbc0c711b ceph: remove the extra slashes in the server path
It's possible to pass the mount helper a server path that has more
than one contiguous slash character. For example:

  $ mount -t ceph 192.168.195.165:40176:/// /mnt/cephfs/

In the MDS server side the extra slashes of the server path will be
treated as snap dir, and then we can get the following debug logs:

  ceph:  mount opening path //
  ceph:  open_root_inode opening '//'
  ceph:  fill_trace 0000000059b8a3bc is_dentry 0 is_target 1
  ceph:  alloc_inode 00000000dc4ca00b
  ceph:  get_inode created new inode 00000000dc4ca00b 1.ffffffffffffffff ino 1
  ceph:  get_inode on 1=1.ffffffffffffffff got 00000000dc4ca00b

And then when creating any new file or directory under the mount
point, we can hit the following BUG_ON in ceph_fill_trace():

  BUG_ON(ceph_snap(dir) != dvino.snap);

Have the client ignore the extra slashes in the server path when
mounting. This will also canonicalize the path, so that identical mounts
can be consilidated.

1) "//mydir1///mydir//"
2) "/mydir1/mydir"
3) "/mydir1/mydir/"

Regardless of the internal treatment of these paths, the kernel still
stores the original string including the leading '/' for presentation
to userland.

URL: https://tracker.ceph.com/issues/42771
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-01-27 16:53:40 +01:00
Xiubo Li b38c9eb475 ceph: add possible_max_rank and make the code more readable
The m_num_mds here is actually the number for MDSs which are in
up:active status, and it will be duplicated to m_num_active_mds,
so remove it.

Add possible_max_rank to the mdsmap struct and this will be
the correctly possible largest rank boundary.

Remove the special case for one mds in __mdsmap_get_random_mds(),
because the validate mds rank may not always be 0.

Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-01-27 16:53:40 +01:00
Xiubo Li 0eb308531f ceph: print dentry offset in hex and fix xattr_version type
In the debug logs about the di->offset or ctx->pos it is in hex
format, but some others are using the dec format. It is a little
hard to read.

For the xattr version, it is u64 type, using a shorter type may
truncate it.

Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-01-27 16:53:39 +01:00
Xiubo Li 9f8b72b3a9 ceph: only touch the caps which have the subset mask requested
For the caps having no any subset mask requested we shouldn't touch
them.

Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-01-27 16:53:39 +01:00
Jeff Layton 893e456b2c ceph: don't clear I_NEW until inode metadata is fully populated
Currently, we could have an open-by-handle (or NFS server) call
into the filesystem and start working with an inode before it's
properly filled out.

Don't clear I_NEW until we have filled out the inode, and discard it
properly if that fails. Note that we occasionally take an extra
reference to the inode to ensure that we don't put the last reference in
discard_new_inode, but rather leave it for ceph_async_iput.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-01-27 16:53:39 +01:00
Xiubo Li c4853e9776 ceph: retry the same mds later after the new session is opened
If max_mds > 1 and a request is submitted that chooses a random mds
rank, and the relating session is not opened yet, the request will wait
until the session has been opened and resend again.

Every time the request goes through __do_request, it will release the
req->session first and choose a random one again, which may be a
completely different rank than the one it just waited on.

In the worst case, it will open all the mds sessions one by one just
before the request can be successfully sent out.

Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-01-27 16:53:39 +01:00
Xiubo Li 97820058fb ceph: check availability of mds cluster on mount after wait timeout
If all the MDS daemons are down for some reason, then the first mount
attempt will fail with EIO after the mount request times out.  A mount
attempt will also fail with EIO if all of the MDS's are laggy.

This patch changes the code to return -EHOSTUNREACH in these situations
and adds a pr_info error message to help the admin determine the cause.

URL: https://tracker.ceph.com/issues/4386
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-01-27 16:53:39 +01:00
Xiubo Li 4d681c2f91 ceph: keep the session state until it is released
When reconnecting the session but if it is denied by the MDS due
to client was in blacklist or something else, kclient will receive
a session close reply, and we will never see the important log:

"ceph:  mds%d reconnect denied"

And with the confusing log:

"ceph:  handle_session mds0 close 0000000085804730 state ??? seq 0"

Let's keep the session state until its memories is released.

Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-01-27 16:53:39 +01:00
Xiubo Li 9cf54563b0 ceph: add __send_request helper
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-01-27 16:53:39 +01:00
Jeff Layton 9a6bed4fe0 ceph: ensure we have a new cap before continuing in fill_inode
If the caller passes in a NULL cap_reservation, and we can't allocate
one then ensure that we fail gracefully.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-01-27 16:53:39 +01:00
Jeff Layton 57c2199482 ceph: drop unused ttl_from parameter from fill_inode
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-01-27 16:53:39 +01:00
Xiubo Li 07edc0571e ceph: fix possible long time wait during umount
During umount, if there has no any unsafe request in the mdsc and
some requests still in-flight and not got reply yet, and if the
rest requets are all safe ones, after that even all of them in mdsc
are unregistered, the umount must wait until after mount_timeout
seconds anyway.

Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-01-27 16:53:39 +01:00
Xiubo Li 5d47648fe9 ceph: only choose one MDS who is in up:active state without laggy
Even the MDS is in up:active state, but it also maybe laggy. Here
will skip the laggy MDSs.

Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-01-27 16:53:39 +01:00
Xiubo Li 4d7ace02ba ceph: fix mdsmap cluster available check based on laggy number
In case the max_mds > 1 in MDS cluster and there is no any standby
MDS and all the max_mds MDSs are in up:active state, if one of the
up:active MDSs is dead, the m->m_num_laggy in kclient will be 1.
Then the mount will fail without considering other healthy MDSs.

There manybe some MDSs still "in" the cluster but not in up:active
state, we will ignore them. Only when all the up:active MDSs in
the cluster are laggy will treat the cluster as not be available.

In case decreasing the max_mds, the cluster will not stop the extra
up:active MDSs immediately and there will be a latency. During it
the up:active MDS number will be larger than the max_mds, so later
the m_info memories will 100% be reallocated.

Here will pick out the up:active MDSs as the m_num_mds and allocate
the needed memories once.

Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-01-27 16:53:39 +01:00
Chengguang Xu d80865bff5 ceph: remove unnecessary assignment in ceph_pre_init_acls()
ceph_pagelist_encode_string() will not fail in reserved case,
also, we do not check err code here, so remove unnecessary
assignment.

Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-01-27 16:53:39 +01:00
Chengguang Xu 8f5ac172ab ceph: delete redundant douts in con_get/put()
We print session's refcount in debug message inside
ceph_put_mds_session() and get_session(), so we don't have to
print it in con_get()/__ceph_lookup_mds_session()/con_put().

Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-01-27 16:53:39 +01:00
Jeff Layton 9c1c2b35f1 ceph: hold extra reference to r_parent over life of request
Currently, we just assume that it will stick around by virtue of the
submitter's reference, but later patches will allow the syscall to
return early and we can't rely on that reference at that point.

While I'm not aware of any reports of it, Xiubo pointed out that this
may fix a use-after-free.  If the wait for a reply times out or is
canceled via signal, and then the reply comes in after the syscall
returns, the client can end up trying to access r_parent without a
reference.

Take an extra reference to the inode when setting r_parent and release
it when releasing the request.

Cc: stable@vger.kernel.org
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-01-21 19:02:37 +01:00
Xiubo Li da08e1e1d7 ceph: add more debug info when decoding mdsmap
Show the laggy state.

Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-12-09 20:55:10 +01:00
Xiubo Li bd84fbcb31 ceph: switch to global cap helper
__ceph_is_any_caps is a duplicate helper.

Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-12-09 20:55:10 +01:00
Xiubo Li bba1560bd4 ceph: trigger the reclaim work once there has enough pending caps
The nr in ceph_reclaim_caps_nr() is very possibly larger than 1,
so we may miss it and the reclaim work couldn't triggered as expected.

Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-12-09 20:55:10 +01:00
Jeff Layton 3a3430affc ceph: show tasks waiting on caps in debugfs caps file
Add some visibility of tasks that are waiting for caps to the "caps"
debugfs file. Display the tgid of the waiting task, inode number, and
the caps the task needs and wants.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-12-09 20:55:10 +01:00
Jeff Layton ad8c28a9eb ceph: convert int fields in ceph_mount_options to unsigned int
Most of these values should never be negative, so convert them to
unsigned values. Add some sanity checking to the parsed values, and
clean up some unneeded casts.

Note that while caps_max should never be negative, this patch leaves
it signed, since this value ends up later being compared to a signed
counter. Just ensure that userland never passes in a negative value
for caps_max.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-12-09 20:55:10 +01:00
Deepa Dinamani 668c9a61e3 fs: ceph: Delete timespec64_trunc() usage
Since ceph always uses ns granularity, skip the
truncation which is a no-op.

Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: jlayton@kernel.org
Cc: ceph-devel@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-12-08 19:10:53 -05:00
Linus Torvalds a231582359 The two highlights are a set of improvements to how rbd read-only
mappings are handled and a conversion to the new mount API (slightly
 complicated by the fact that we had a common option parsing framework
 that called out into rbd and the filesystem instead of them calling
 into it).  Also included a few scattered fixes and a MAINTAINERS update
 for rbd, adding Dongsheng as a reviewer.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAl3oDqwTHGlkcnlvbW92
 QGdtYWlsLmNvbQAKCRBKf944AhHzi8/OCACAhPEoSkG8J0XOgP0NlFQGRvikugKq
 wlUfpNhkJOVmyM1t9LgiHHirTa7/kA76wPo/iHtnvjIZuZoaX3+NoZX5DwgKVCo1
 SCQdXR4ohVPiYxUpK+z/fDXxpYHhaO2SAww+RRHSDxnlN5CHqFBcBhRBPfhraZT5
 dwiQt7++UOnp/hfk1Dqg5EogmSdLxqWyjClKf2lliZkzbU9YXmGapqQsur6sBk+e
 cLRmRBmMw4cDAKLL1taCympN0AxNMcePs1njvdwQ7XabNWrT061yFyt1ZNwAV/Nu
 0nCyh/9IwQcsR0EvK7FCdUEJPy88Reufd+GleS4nkEZpbxQBzo0aGow0
 =Egtk
 -----END PGP SIGNATURE-----

Merge tag 'ceph-for-5.5-rc1' of git://github.com/ceph/ceph-client

Pull ceph updates from Ilya Dryomov:
 "The two highlights are a set of improvements to how rbd read-only
  mappings are handled and a conversion to the new mount API (slightly
  complicated by the fact that we had a common option parsing framework
  that called out into rbd and the filesystem instead of them calling
  into it).

  Also included a few scattered fixes and a MAINTAINERS update for rbd,
  adding Dongsheng as a reviewer"

* tag 'ceph-for-5.5-rc1' of git://github.com/ceph/ceph-client:
  libceph, rbd, ceph: convert to use the new mount API
  rbd: ask for a weaker incompat mask for read-only mappings
  rbd: don't query snapshot features
  rbd: remove snapshot existence validation code
  rbd: don't establish watch for read-only mappings
  rbd: don't acquire exclusive lock for read-only mappings
  rbd: disallow read-write partitions on images mapped read-only
  rbd: treat images mapped read-only seriously
  rbd: introduce RBD_DEV_FLAG_READONLY
  rbd: introduce rbd_is_snap()
  ceph: don't leave ino field in ceph_mds_request_head uninitialized
  ceph: tone down loglevel on ceph_mdsc_build_path warning
  rbd: update MAINTAINERS info
  ceph: fix geting random mds from mdsmap
  rbd: fix spelling mistake "requeueing" -> "requeuing"
  ceph: make several helper accessors take const pointers
  libceph: drop unnecessary check from dispatch() in mon_client.c
2019-12-05 13:06:51 -08:00
Linus Torvalds 0da522107e compat_ioctl: remove most of fs/compat_ioctl.c
As part of the cleanup of some remaining y2038 issues, I came to
 fs/compat_ioctl.c, which still has a couple of commands that need support
 for time64_t.
 
 In completely unrelated work, I spent time on cleaning up parts of this
 file in the past, moving things out into drivers instead.
 
 After Al Viro reviewed an earlier version of this series and did a lot
 more of that cleanup, I decided to try to completely eliminate the rest
 of it and move it all into drivers.
 
 This series incorporates some of Al's work and many patches of my own,
 but in the end stops short of actually removing the last part, which is
 the scsi ioctl handlers. I have patches for those as well, but they need
 more testing or possibly a rewrite.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJdsHCdAAoJEJpsee/mABjZtYkP/1JGl3jFv3Iq/5BCdPkaePP1
 RtMJRNfURgK3GeuHUui330PvVjI/pLWXU/VXMK2MPTASpJLzYz3uCaZrpVWEMpDZ
 +ImzGmgJkITlW1uWU3zOcQhOxTyb1hCZ0Ci+2xn9QAmyOL7prXoXCXDWv3h6iyiF
 lwG+nW+HNtyx41YG+9bRfKNoG0ZJ+nkJ70BV6u0acQHXWn7Xuupa9YUmBL87hxAL
 6dlJfLTJg6q8QSv/Q6LxslfWk2Ti8OOJZOwtFM5R8Bgl0iUcvshiRCKfv/3t9jXD
 dJNvF1uq8z+gracWK49Qsfq5dnZ2ZxHFUo9u0NjbCrxNvWH/sdvhbaUBuJI75seH
 VIznCkdxFhrqitJJ8KmxANxG08u+9zSKjSlxG2SmlA4qFx/AoStoHwQXcogJscNb
 YIXYKmWBvwPzYu09QFAXdHFPmZvp/3HhMWU6o92lvDhsDwzkSGt3XKhCJea4DCaT
 m+oCcoACqSWhMwdbJOEFofSub4bY43s5iaYuKes+c8O261/Dwg6v/pgIVez9mxXm
 TBnvCsotq5m8wbwzv99eFqGeJH8zpDHrXxEtRR5KQqMqjLq/OQVaEzmpHZTEuK7n
 e/V/PAKo2/V63g4k6GApQXDxnjwT+m0aWToWoeEzPYXS6KmtWC91r4bWtslu3rdl
 bN65armTm7bFFR32Avnu
 =lgCl
 -----END PGP SIGNATURE-----

Merge tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground

Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann:
 "As part of the cleanup of some remaining y2038 issues, I came to
  fs/compat_ioctl.c, which still has a couple of commands that need
  support for time64_t.

  In completely unrelated work, I spent time on cleaning up parts of
  this file in the past, moving things out into drivers instead.

  After Al Viro reviewed an earlier version of this series and did a lot
  more of that cleanup, I decided to try to completely eliminate the
  rest of it and move it all into drivers.

  This series incorporates some of Al's work and many patches of my own,
  but in the end stops short of actually removing the last part, which
  is the scsi ioctl handlers. I have patches for those as well, but they
  need more testing or possibly a rewrite"

* tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits)
  scsi: sd: enable compat ioctls for sed-opal
  pktcdvd: add compat_ioctl handler
  compat_ioctl: move SG_GET_REQUEST_TABLE handling
  compat_ioctl: ppp: move simple commands into ppp_generic.c
  compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t
  compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic
  compat_ioctl: unify copy-in of ppp filters
  tty: handle compat PPP ioctls
  compat_ioctl: move SIOCOUTQ out of compat_ioctl.c
  compat_ioctl: handle SIOCOUTQNSD
  af_unix: add compat_ioctl support
  compat_ioctl: reimplement SG_IO handling
  compat_ioctl: move WDIOC handling into wdt drivers
  fs: compat_ioctl: move FITRIM emulation into file systems
  gfs2: add compat_ioctl support
  compat_ioctl: remove unused convert_in_user macro
  compat_ioctl: remove last RAID handling code
  compat_ioctl: remove /dev/raw ioctl translation
  compat_ioctl: remove PCI ioctl translation
  compat_ioctl: remove joystick ioctl translation
  ...
2019-12-01 13:46:15 -08:00
David Howells 82995cc6c5 libceph, rbd, ceph: convert to use the new mount API
Convert the ceph filesystem to the new internal mount API as the old
one will be obsoleted and removed.  This allows greater flexibility in
communication of mount parameters between userspace, the VFS and the
filesystem.

See Documentation/filesystems/mount_api.txt for more information.

[ Numerous string handling, leak and regression fixes; rbd conversion
  was particularly broken and had to be redone almost from scratch. ]

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-11-27 22:28:37 +01:00
Jeff Layton 2def865a81 ceph: don't leave ino field in ceph_mds_request_head uninitialized
We currently just pass junk in this field unless we're retransmitting a
create, but in later patches, we'll need a mechanism to pass a delegated
inode number on an initial create request. Prepare for this by ensuring
this field is zeroed out.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-11-25 11:44:02 +01:00
Jeff Layton f5946bcc5e ceph: tone down loglevel on ceph_mdsc_build_path warning
When this occurs, it usually means that we raced with a rename, and
there is no need to warn in that case.  Only printk if we pass the
rename sequence check but still ended up with pos < 0.

Either way, this doesn't warrant a KERN_ERR message. Change it to
KERN_WARNING.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-11-25 11:44:02 +01:00
Xiubo Li 74d6f03019 ceph: fix geting random mds from mdsmap
For example, if we have 5 mds in the mdsmap and the states are:
m_info[5] --> [-1, 1, -1, 1, 1]

If we get a random number 1, then we should get the mds index 3 as
expected, but actually we will get index 2, which the state is -1.

The issue is that the for loop increment will advance past any "up"
MDS that was found during the while loop search.

Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-11-25 11:44:02 +01:00