Граф коммитов

27 Коммитов

Автор SHA1 Сообщение Дата
Mark Brown 7cc289b9c6
Merge remote-tracking branches 'asoc/topic/mxs', 'asoc/topic/mxs-sgtl5000', 'asoc/topic/nau8540', 'asoc/topic/nau8824' and 'asoc/topic/nau8825' into asoc-next 2018-01-18 11:56:05 +00:00
Fabio Estevam d04c413f2a
ASoC: mxs-sgtl5000: Do not print error on probe deferral
Probe deferral may happen, so do not print an error message in this
case.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-18 10:59:07 +00:00
Christian Fischer 949293d45d
ASoC: mxs-sgtl5000: add audio-routing support
Add dapm_widgets to machine-driver (from imx-sgtl5000).
If the "audio-routing"-property is present at probing the dapm-widgets
getting linked to the card.

Signed-off-by: Christian Fischer <fischerc@swissphone.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-12 21:23:47 +00:00
Donglin Peng 4c316783ee ASoC: mxs-sgtl5000: Remove unnecessary function call
First of all,the address of pdev->dev is assigned to card->dev,then
the function platform_set_drvdata copies the value the variable card
to pdev->dev.driver_data, but when calling snd_soc_register_card,the
function dev_set_drvdata(card->dev, card) will also do the same copy
operation,so i think that the former copy operation can be removed.

Signed-off-by: Peng Donglin <dolinux.peng@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-21 17:13:30 +01:00
Julia Lawall 9b6fdef62b ASoC: constify snd_soc_ops structures
Check for snd_soc_ops structures that are only stored in the ops field of a
snd_soc_dai_link structure.  This field is declared const, so snd_soc_ops
structures that have this property can be declared as const also.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct snd_soc_ops i@p = { ... };

@ok1@
identifier r.i;
struct snd_soc_dai_link e;
position p;
@@
e.ops = &i@p;

@ok2@
identifier r.i, e;
position p;
@@
struct snd_soc_dai_link e[] = { ..., { .ops = &i@p, }, ..., };

@bad@
position p != {r.p,ok1.p,ok2.p};
identifier r.i;
struct snd_soc_ops e;
@@
e@i@p

@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
 struct snd_soc_ops i = { ... };
// </smpl>

The effect on the layout of the .o files is shown by the following output
of the size command, first before then after the transformation:

   text    data     bss     dec     hex filename
   4500     696       0    5196    144c sound/soc/generic/simple-card.o
   4564     632       0    5196    144c sound/soc/generic/simple-card.o

   text    data     bss     dec     hex filename
   3018     608       0    3626     e2a sound/soc/generic/simple-scu-card.o
   3074     544       0    3618     e22 sound/soc/generic/simple-scu-card.o

   text    data     bss     dec     hex filename
   4148    2448     768    7364    1cc4 sound/soc/intel/boards/bdw-rt5677.o
   4212    2384     768    7364    1cc4 sound/soc/intel/boards/bdw-rt5677.o

   text    data     bss     dec     hex filename
   5403    4628     384   10415    28af sound/soc/intel/boards/bxt_da7219_max98357a.o
   5531    4516     384   10431    28bf sound/soc/intel/boards/bxt_da7219_max98357a.o

   text    data     bss     dec     hex filename
   5275    4496     384   10155    27ab sound/soc/intel/boards/bxt_rt298.o
   5403    4368     384   10155    27ab sound/soc/intel/boards/bxt_rt298.o

   text    data     bss     dec     hex filename
  10017    2344      48   12409    3079 sound/soc/intel/boards/bytcr_rt5640.o
  10145    2232      48   12425    3089 sound/soc/intel/boards/bytcr_rt5640.o

   text    data     bss     dec     hex filename
   3719    2356       0    6075    17bb sound/soc/intel/boards/bytcr_rt5651.o
   3847    2244       0    6091    17cb sound/soc/intel/boards/bytcr_rt5651.o

   text    data     bss     dec     hex filename
   3598    2392       0    5990    1766 sound/soc/intel/boards/cht_bsw_max98090_ti.o
   3726    2280       0    6006    1776 sound/soc/intel/boards/cht_bsw_max98090_ti.o

   text    data     bss     dec     hex filename
   5343    3624      16    8983    2317 sound/soc/intel/boards/cht_bsw_rt5645.o
   5471    3496      16    8983    2317 sound/soc/intel/boards/cht_bsw_rt5645.o

   text    data     bss     dec     hex filename
   4662    2592     384    7638    1dd6 sound/soc/intel/boards/cht_bsw_rt5672.o
   4790    2464     384    7638    1dd6 sound/soc/intel/boards/cht_bsw_rt5672.o

   text    data     bss     dec     hex filename
   1595    2528       0    4123    101b sound/soc/intel/boards/haswell.o
   1659    2472       0    4131    1023 sound/soc/intel/boards/haswell.o

   text    data     bss     dec     hex filename
   6272    4760     416   11448    2cb8 sound/soc/intel/boards/skl_nau88l25_max98357a.o
   6464    4568     416   11448    2cb8 sound/soc/intel/boards/skl_nau88l25_max98357a.o

   text    data     bss     dec     hex filename
   7075    4888     416   12379    305b sound/soc/intel/boards/skl_nau88l25_ssm4567.o
   7267    4696     416   12379    305b sound/soc/intel/boards/skl_nau88l25_ssm4567.o

   text    data     bss     dec     hex filename
   5659    4496     384   10539    292b sound/soc/intel/boards/skl_rt286.o
   5787    4368     384   10539    292b sound/soc/intel/boards/skl_rt286.o

   text    data     bss     dec     hex filename
   1721    2048       0    3769     eb9 sound/soc/kirkwood/armada-370-db.o
   1769    1976       0    3745     ea1 sound/soc/kirkwood/armada-370-db.o

   text    data     bss     dec     hex filename
   1363    1792       0    3155     c53 sound/soc/mxs/mxs-sgtl5000.o
   1427    1728       0    3155     c53 sound/soc/mxs/mxs-sgtl5000.o

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-24 18:34:55 +01:00
Axel Lin 5b73de19fd ASoC: mxs-sgtl5000: Convert to devm_snd_soc_register_card
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-14 18:33:17 +01:00
Lars-Peter Clausen bc6a5d649b ASoC: mxs-sgtl5000: Use static DAI format setup
Set the dai_fmt field in the dai_link struct instead of manually calling
snd_soc_dai_fmt(). This makes the code cleaner and shorter.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-06 17:34:27 +00:00
Linus Torvalds e6b5be2be4 Driver core patches for 3.19-rc1
Here's the set of driver core patches for 3.19-rc1.
 
 They are dominated by the removal of the .owner field in platform
 drivers.  They touch a lot of files, but they are "simple" changes, just
 removing a line in a structure.
 
 Other than that, a few minor driver core and debugfs changes.  There are
 some ath9k patches coming in through this tree that have been acked by
 the wireless maintainers as they relied on the debugfs changes.
 
 Everything has been in linux-next for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlSOD20ACgkQMUfUDdst+ylLPACg2QrW1oHhdTMT9WI8jihlHVRM
 53kAoLeteByQ3iVwWurwwseRPiWa8+MI
 =OVRS
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core update from Greg KH:
 "Here's the set of driver core patches for 3.19-rc1.

  They are dominated by the removal of the .owner field in platform
  drivers.  They touch a lot of files, but they are "simple" changes,
  just removing a line in a structure.

  Other than that, a few minor driver core and debugfs changes.  There
  are some ath9k patches coming in through this tree that have been
  acked by the wireless maintainers as they relied on the debugfs
  changes.

  Everything has been in linux-next for a while"

* tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits)
  Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries"
  fs: debugfs: add forward declaration for struct device type
  firmware class: Deletion of an unnecessary check before the function call "vunmap"
  firmware loader: fix hung task warning dump
  devcoredump: provide a one-way disable function
  device: Add dev_<level>_once variants
  ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries
  ath: use seq_file api for ath9k debugfs files
  debugfs: add helper function to create device related seq_file
  drivers/base: cacheinfo: remove noisy error boot message
  Revert "core: platform: add warning if driver has no owner"
  drivers: base: support cpu cache information interface to userspace via sysfs
  drivers: base: add cpu_device_create to support per-cpu devices
  topology: replace custom attribute macros with standard DEVICE_ATTR*
  cpumask: factor out show_cpumap into separate helper function
  driver core: Fix unbalanced device reference in drivers_probe
  driver core: fix race with userland in device_add()
  sysfs/kernfs: make read requests on pre-alloc files use the buffer.
  sysfs/kernfs: allow attributes to request write buffer be pre-allocated.
  fs: sysfs: return EGBIG on write if offset is larger than file size
  ...
2014-12-14 16:10:09 -08:00
Fabio Estevam d206f66177 ASoC: mxs-sgtl5000: Remove MCLK restriction
According to the sgtl5000 datasheet the MCLK frequency range restriction of
8 to 27 MHz only applies when the PLL is used - synchronous SYS_MCLK input mode.

mxs-sgtl5000 machine sets the codec as slave, and mx28 generates MCLK in the
range of 256*fs, 384*fs or 512*fs, which is called asynchronous SYS_MCLK
input.

In asynchronous SYS_MCLK we cannot have the 8 to 27 MHz check because if we
want to play a 8KHz sample rate track, with a MCLK of 8k * 512 = 4.096MHz the
current check would return -EINVAL, which is not correct.

Remove the 8 to 27MHz frequency check, since this only applies to the
synchronous SYS_MCLK input case.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-27 17:42:16 +00:00
Wolfram Sang 38b089d78b ASoC: mxs: drop owner assignment from platform_drivers
A platform_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-20 16:22:10 +02:00
Fabio Estevam 38f2b8cbfb ASoC: mxs: mxs-sgtl5000: Simplify probe function
mxs is a device tree only platform, which allows us to simplify a bit
mxs_sgtl5000_probe(), because there is no need to check whether device tree is
supported or not.

Remove mxs_sgtl5000_probe_dt() and place its content inside mxs_sgtl5000_probe()
for making the code simpler.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-17 00:40:10 +01:00
Mark Brown 90d561bed9 Merge remote-tracking branch 'asoc/topic/fsl' into tmp 2013-09-01 21:15:52 +01:00
Fabio Estevam a90e6053ba ASoC: mxs-sgtl5000: Configure the dai_links as unidirectional
On a mx28 board, running "aplay -l" and "arecord -l" results in the following:

$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: mxssgtl5000 [mxs_sgtl5000], device 0: Playback sgtl5000-0 []
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: mxssgtl5000 [mxs_sgtl5000], device 1: Capture sgtl5000-1 []
  Subdevices: 1/1
  Subdevice #0: subdevice #0

$ arecord -l
**** List of CAPTURE Hardware Devices ****
card 0: mxssgtl5000 [mxs_sgtl5000], device 0: Playback sgtl5000-0 []
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: mxssgtl5000 [mxs_sgtl5000], device 1: Capture sgtl5000-1 []
  Subdevices: 1/1
  Subdevice #0: subdevice #0

,which is not correct because we got a capture device listed in aplay and a
playback device listed in arecord.

On mx28 there are two serial audio interface ports (SAIF0 and SAIF1) and each
one of them are unidirectional.

Allow to specify a dai link as 'playback_only' or 'capture_only', which suits
well for this case.

After this change we can correctly report the capabilities as follows:

$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: mxssgtl5000 [mxs_sgtl5000], device 0: HiFi Playback sgtl5000-0 []
  Subdevices: 1/1
  Subdevice #0: subdevice #0

$ arecord -l
**** List of CAPTURE Hardware Devices ****
card 0: mxssgtl5000 [mxs_sgtl5000], device 1: HiFi Capture sgtl5000-1 []
  Subdevices: 1/1
  Subdevice #0: subdevice #0

Also tested playback and capture on the mx28evk board.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-01 16:29:27 +01:00
Lothar Waßmann d66a5b9c82 ASoC: mxs: add some error messages to help identifying problems
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-05 19:03:19 +01:00
Mark Brown 204f029155 ASoC: mxs: Remove unneeded mach-types.h inclusions
Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-22 11:02:13 +01:00
Fabio Estevam 666c25e3d7 ASoC: mxs-sgtl5000: Remove unneeded fields from snd_soc_dai_link
It makes no sense to hardcode the I2C bus into the codec_name field.

cpu_dai_name and platform_name are also overwritten later in
mxs_sgtl5000_probe_dt().

So remove the three fields, as mxs platform is dt-only platform.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-12 20:45:34 +04:00
Fabio Estevam f8b24fcbd0 ASoC: mxs-sgtl5000: Remove unneeded 'ret' variable
Variable 'ret' is not needed here, so just remove it.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-12 20:45:34 +04:00
Bill Pemberton fd582736ab ASoC: mxs: remove __dev* attributes
CONFIG_HOTPLUG is going away as an option.  As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-10 00:31:26 +09:00
Stephen Warren bc92657a11 ASoC: make snd_soc_dai_link more symmetrical
Prior to this patch, the CPU side of a DAI link was specified using a
single name. Often, this was the result of calling dev_name() on the
device providing the DAI, but in the case of a CPU DAI driver that
provided multiple DAIs, it needed to mix together both the device name
and some device-relative name, in order to form a single globally unique
name.

However, the CODEC side of the DAI link was specified using separate
fields for device (name or OF node) and device-relative DAI name.

This patch allows the CPU side of a DAI link to be specified in the same
way as the CODEC side, separating concepts of device and device-relative
DAI name.

I believe this will be important in multi-codec and/or dynamic PCM
scenarios, where a single CPU driver provides multiple DAIs, while also
booting using device tree, with accompanying desire not to hard-code the
CPU side device's name into the original .cpu_dai_name field.

Ideally, both the CPU DAI and CODEC DAI loops in soc_bind_dai_link()
would now be identical. However, two things prevent that at present:

1) The need to save rtd->codec for the CODEC side, which means we have
to search for the CODEC explicitly, and not just the CODEC side DAI.

2) Since we know the CODEC side DAI is part of a codec, and not just
a standalone DAI, it's slightly more efficient to convert .codec_name/
.codec_of_node into a codec first, and then compare each DAI's .codec
field, since this avoids strcmp() on each DAI's CODEC's name within
the loop.

However, the two loops are essentially semantically equivalent.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03 13:06:41 +01:00
Shawn Guo e968194b45 ASoC: mxs: add device tree support for mxs-sgtl5000
Add device tree probe for mxs-sgtl5000 machine driver.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-12 11:04:59 +01:00
Shawn Guo 4da3fe7851 ASoC: mxs: mxs-pcm does not need to be a plaform_driver
Same as the commit 518de86 (ASoC: tegra: register 'platform' from DAIs,
get rid of pdev), it makes mxs-pcm not a platform_driver but helper to
register "platform", so that the platform_device for mxs-pcm can be
saved completely.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-12 11:04:58 +01:00
Lothar Waßmann a5b683489f ASoC: mxs: Add .owner to struct snd_soc_card
Add missing .owner of struct snd_soc_card. This prevents the module from being
removed from underneath its users.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-28 17:20:48 +00:00
Mark Brown 43a9519758 Merge branch 'for-3.2' into for-3.3
Conflicts:
	sound/soc/mxs/mxs-pcm.c
2011-12-11 11:24:44 +08:00
Lothar Waßmann 9fd369b193 ASoC: mxs: Add appropriate MODULE_ALIAS()
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-11 10:59:02 +08:00
Axel Lin 85aa0960d8 ASoC: Convert mxs directory to module_platform_driver
Factor out some boilerplate code.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Dong Aisheng <dong.aisheng@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-24 10:45:18 +00:00
Dong Aisheng 78a262c871 ASoC: mxs-sgtl5000: add record function
Signed-off-by: Dong Aisheng <b29396@freescale.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-22 23:36:15 +01:00
Dong Aisheng fcb5e47eff ASoC: mxs: add mxs-sgtl5000 machine driver
The driver only supports playback firstly.
For recording, as we have to use two saif instances to implement full
duplex (playback & recording) due to hardware limitation, we need to
figure out a good design to fit in ASoC.

Signed-off-by: Dong Aisheng <b29396@freescale.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-28 11:47:35 +01:00