Original kcs_bmc_npcm7xx.c was missing enabling to send interrupt to the
host on writes to output buffer.
This patch fixes it by setting the bits that enables the generation of
IRQn events by hardware control based on the status of the OBF flag.
Signed-off-by: Avi Fishman <AviFishman70@gmail.com>
Reviewed-by: Haiyue Wang <haiyue.wang@linux.intel.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
There was one place where the timeout value for an operation was
not being set, if a capabilities request was done from idle. Move
the timeout value setting to before where that change might be
requested.
IMHO the cause here is the invisible returns in the macros. Maybe
that's a job for later, though.
Reported-by: Nordmark Claes <Claes.Nordmark@tieto.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: stable@vger.kernel.org
Currently, function ssif_remove returns _rv_, which is a variable that
is never initialized.
Fix this by removing variable _rv_ and return 0 instead.
Addresses-Coverity-ID: 1467999 ("Uninitialized scalar variable")
Fixes: 6a0d23ed33 ("ipmi: ipmi_unregister_smi() cannot fail, have it
return void")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
This driver exposes the Keyboard Controller Style (KCS) interface on
Novoton NPCM7xx SoCs as a character device. Such SOCs are commonly used
as a BaseBoard Management Controller (BMC) on a server board, and KCS
interface is commonly used to perform the in-band IPMI communication
between the server and its BMC.
Signed-off-by: Avi Fishman <avifishman70@gmail.com>
Signed-off-by: Haiyue Wang <haiyue.wang@linux.intel.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
There is already an intf_num in the main IPMI device structure, use
a different name in the ipmi_si code to avoid confusion.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Due to changes in the way shutdown is done, it is no longer
required to check that the interface is set.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Move the shutdown handling to a shutdown function called from
the IPMI core code. That makes for a cleaner shutdown.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Move the shutdown handling to a shutdown function called from
the IPMI core code. That makes for a cleaner shutdown.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
To handle hot remove of interfaces, a lot of rework had to be
done to the locking. Several things were switched over to srcu
and shutdown for users and interfaces was added for cleaner
shutdown.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Counters would not be pegged properly on some errors. Have
deliver_response() return an error so the counters can be
incremented properly.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The mutex didn't really serve any useful purpose, from what I can
tell, and it would just get in the way. So remove it.
Removing that required a mutex around the default value setting and
getting, so just use the receive mutex for that.
Also pull the fasync stuff outside of the lock for adding the data
to the queue, since it didn't need to be there.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
This is a cleaner interface and the main IPMI panic handler does setup
required by the watchdog handler.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Users of the IPMI code had their own panic handlers, but the
order was not necessarily right, the base IPMI code would
need to handle the panic first, and the user had no way to
know if the IPMI interface could run at panic time.
Add a panic handler to the user interface, it is called if
non-NULL and the interface the user is on is capable of panic
handling. It also cleans up the panic log handling a bit to
reuse the existing interface loop in the main panic handler.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Simplify things by creating one set of message handling data for
setting the watchdog and doing a heartbeat. Rework the locking
to avoid some (probably not very important) races and to avoid
a fairly unlikely infinite recursion.
Get rid of ipmi_ignore_heartbeat, it wasn't used, and use
watchdog_user to tell if we have a working IPMI device below
us.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
If you send a command to another BMC that might take some extra
time, increase the timeouts temporarily.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
By default the retry timeout is 1 second. Allow that to be modified,
primarily for slow operations, like firmware writes.
Also, the timeout was driven by a 1 second timer, so 1 second really
meant between 0 and 1 second. Set the default to 2 seconds so it
means between 1 and 2 seconds.
Also allow the time the interface automatically stays in mainenance
mode to be modified from it's default 30 seconds.
Also consolidate some of the timeout and retry setup.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
more
This patch allows HP PA-RISC servers like rp3410/rp3440 and the HP C8000
workstation with an IPMI controller that predate IPMI 1.5 to use the standard
poweroff or powercycle commands.
These systems firmware don't set the chassis capability bit in the Get
Device ID, but they do implement the standard poweroff and powercycle
commands.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
This happens when BMC doesn't return any data and the code is trying
to print the value of data[2].
Getting following crash:
[ 484.728410] Unable to handle kernel NULL pointer dereference at virtual address 00000002
[ 484.736496] pgd = ffff0000094a2000
[ 484.739885] [00000002] *pgd=00000047fcffe003, *pud=00000047fcffd003, *pmd=0000000000000000
[ 484.748158] Internal error: Oops: 96000005 [#1] SMP
[...]
[ 485.101451] Call trace:
[...]
[ 485.188473] [<ffff000000a46e68>] msg_done_handler+0x668/0x700 [ipmi_ssif]
[ 485.195249] [<ffff000000a456b8>] ipmi_ssif_thread+0x110/0x128 [ipmi_ssif]
[ 485.202038] [<ffff0000080f1430>] kthread+0x108/0x138
[ 485.206994] [<ffff0000080838e0>] ret_from_fork+0x10/0x30
[ 485.212294] Code: aa1903e1 aa1803e0 b900227f 95fef6a5 (39400aa3)
Adding a check to validate the data len before printing data[2] to fix this issue.
Signed-off-by: Kamlakant Patel <kamlakant.patel@cavium.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Realtek has some sort of "Virtual" IPMI device on the PCI bus as a
KCS controller, but whatever it is, it's not one. Ignore it if seen.
Reported-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Daniel Drake <drake@endlessm.com>
The IPMI spec states:
The purpose of the SPMI Table is to provide a mechanism that can
be used by the OSPM (an ACPI term for “OS Operating System-directed
configuration and Power Management” essentially meaning an ACPI-aware
OS or OS loader) very early in the boot process, e.g., before the
ability to execute ACPI control methods in the OS is available.
When we are probing IPMI in Linux, ACPI control methods are available,
so we shouldn't be probing using SPMI. It could cause some confusion
during the probing process.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The IPMI spec states:
The purpose of the SPMI Table is to provide a mechanism that can
be used by the OSPM (an ACPI term for “OS Operating System-directed
configuration and Power Management” essentially meaning an ACPI-aware
OS or OS loader) very early in the boot process, e.g., before the
ability to execute ACPI control methods in the OS is available.
When we are probing IPMI in Linux, ACPI control methods are available,
so we shouldn't be probing using SPMI. It could cause some confusion
during the probing process.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Jiandi An <anjiandi@codeaurora.org>
If platform_device_alloc() then we should return -ENOMEM instead of
returning success.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Use the ARRAY_SIZE macro on a array poweroff_functions to determine
size of the array. Improvement suggested by Coccinelle.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The cleanup code for an init failure and for a device removal were
quite similar, consolidate all that into one function.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
device_remove_group() was called on any cleanup, even if the
device attrs had not been added yet. That can occur in certain
error scenarios, so add a flag to know if it has been added.
Also make sure we remove the dev if we added it ourselves.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: stable@vger.kernel.org # 4.15
Cc: Laura Abbott <labbott@redhat.com>
Tested-by: Bill Perkins <wmp@grnwood.net>
And get rid of the license text that is no longer necessary.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Alistair Popple <alistair@popple.id.au>
Cc: Jeremy Kerr <jk@ozlabs.org>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Rocky Craig <rocky.craig@hp.com>
Many for coding-style fixes, and update the poll API with the new
type '__poll_t', this is new commit from linux-4.16-rc1.
Signed-off-by: Haiyue Wang <haiyue.wang@linux.intel.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 1465255 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Cc: Haiyue Wang <haiyue.wang@linux.intel.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The KCS (Keyboard Controller Style) interface is used to perform in-band
IPMI communication between a server host and its BMC (BaseBoard Management
Controllers).
This driver exposes the KCS interface on ASpeed SOCs (AST2400 and AST2500)
as a character device. Such SOCs are commonly used as BMCs and this driver
implements the BMC side of the KCS interface.
Signed-off-by: Haiyue Wang <haiyue.wang@linux.intel.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Provides a device driver for the KCS (Keyboard Controller Style)
IPMI interface which meets the requirement of the BMC (Baseboard
Management Controllers) side for handling the IPMI request from
host system software.
Signed-off-by: Haiyue Wang <haiyue.wang@linux.intel.com>
[Removed the selectability of IPMI_KCS_BMC, as it doesn't do much
good to have it by itself.]
Signed-off-by: Corey Minyard <cminyard@mvista.com>
This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:
for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
done
with de-mangling cleanups yet to come.
NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do. But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.
The next patch from Al will sort out the final differences, and we
should be all done.
Scripted-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kees Cook
Corey Minyard
Avi Fishman
Gustavo A. R. Silva
Haiyue Wang
Helge Deller
Kamlakant Patel
Dan Carpenter
Colin Ian King
Andy Shevchenko
Gustavo A. R. Silva
Linus Torvalds