As of commit bdc48fa11e, scripts/checkpatch.pl now has a default line
length warning of 100 characters. The powerpc wrapper script was using
a length of 90 instead of 80 in order to make checkpatch less
restrictive, but now it's making it more restrictive instead.
I think it makes sense to just use the default value now.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200828020542.393022-1-ruscur@russell.cc
Currently, using llvm-objtool, this script just silently succeeds without
actually do the intended checking. So this updates it to work properly.
Firstly, llvm-objdump does not add target symbol names to the end
of branches in its asm output, so we have to drop the branch to
__start_initialization_multiplatform using its address.
Secondly, v9 and 10 specify branch targets as .+<offset>, so we convert
those to actual addresses.
Thirdly, v10 and 11 error out on a vmlinux if given the -R option
complaining that it is "not a dynamic object". The -R does not make
any difference to the asm output, so remove it.
Lastly, v11 produces asm that is very similar to Gnu objtool (at least
as far as branches are concerned), so no further changes are necessary
to make it work.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200812081036.7969-3-sfr@canb.auug.org.au
This is considerably faster then parsing the objdump asm output. It will
also make the enabling of llvm-objdump a little easier.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200812081036.7969-2-sfr@canb.auug.org.au
If we can't find the address of __end_interrupts, then we still exit
successfully as that is the current behaviour.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200811140435.20957-8-sfr@canb.auug.org.au
Also start using sed -E and make all the separate expressions into a
single one with comments. Pull the stripping of condition registers
back into the sed command.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200811140435.20957-5-sfr@canb.auug.org.au
We don't use the raw hex instruction dump, so elide it and adjust the
following expressions.
Also use \s instead of [[:space:]] everywhere.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200811140435.20957-4-sfr@canb.auug.org.au
Clang's objdump emits slightly different output from GNU's objdump,
causing a list of warnings to be emitted during relocatable builds.
E.g., clang's objdump emits this:
c000000000000004: 2c 00 00 48 b 0xc000000000000030
...
c000000000005c6c: 10 00 82 40 bf 2, 0xc000000000005c7c
while GNU objdump emits:
c000000000000004: 2c 00 00 48 b c000000000000030 <__start+0x30>
...
c000000000005c6c: 10 00 82 40 bne c000000000005c7c <masked_interrupt+0x3c>
Adjust llvm-objdump's output to remove the extraneous '0x' and convert
'bf' and 'bt' to 'bne' and 'beq' resp. to more closely match GNU
objdump's output.
Note that clang's objdump doesn't yet output the relocation symbols on
PPC.
Signed-off-by: Bill Wendling <morbo@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/191c67db31264b69cf6b566fd69851beb3dd0abb.1595630874.git.morbo@google.com
Commit 8580ac9404 ("bpf: Process in-kernel BTF") introduced two weak
symbols that may be unresolved at link time which result in an absolute
relocation to 0. relocs_check.sh emits the following warning:
"WARNING: 2 bad relocations
c000000001a41478 R_PPC64_ADDR64 _binary__btf_vmlinux_bin_start
c000000001a41480 R_PPC64_ADDR64 _binary__btf_vmlinux_bin_end"
whereas those relocations are legitimate even for a relocatable kernel
compiled with -pie option.
relocs_check.sh already excluded some weak unresolved symbols explicitly:
remove those hardcoded symbols and add some logic that parses the symbols
using nm, retrieves all the weak unresolved symbols and excludes those from
the list of the potential bad relocations.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200118170335.21440-1-alex@ghiti.fr
Some of our scripts are passed $objdump and then call it as
"$objdump". This doesn't work if it contains spaces because we're
using ccache, for example you get errors such as:
./arch/powerpc/tools/relocs_check.sh: line 48: ccache ppc64le-objdump: No such file or directory
./arch/powerpc/tools/unrel_branch_check.sh: line 26: ccache ppc64le-objdump: No such file or directory
Fix it by not quoting the string when we expand it, allowing the shell
to do the right thing for us.
Fixes: a71aa05e14 ("powerpc: Convert relocs_check to a shell script using grep")
Fixes: 4ea80652dc ("powerpc/64s: Tool to flag direct branches from unrelocated interrupt vectors")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191024004730.32135-1-mpe@ellerman.id.au
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
From what I've seen, every time this warning comes up it's bogus,
so let's ignore it.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This makes it easy to run checkpatch with settings that I like.
Usage is eg:
$ ./arch/powerpc/tools/checkpatch.sh -g origin/master..
To check all commits since origin/master.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Russell Currey <ruscur@russell.cc>
This eliminates the workaround that requires disabling
-mprofile-kernel by default in Kconfig.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The powerpc toolchain can compile combinations of 32/64 bit and
big/little endian, so it's convenient to consider, e.g.,
`CC -m64 -mbig-endian`
To be the C compiler for the purpose of invoking it to build target
artifacts. So overriding the CC variable to include these flags works
for this purpose.
Unfortunately that is not compatible with the way the proposed new
Kconfig macro language will work.
After previous patches in this series, these flags can be carefully
passed in using flags instead.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use a tool to check that the location of "fixed sections" are where
we expected them to be, which catches cases the linker script can't
(stubs being added to start of .text section), and which ends up
being neater.
Sample output:
ERROR: start_text address is c000000000008100, should be c000000000008000
ERROR: see comments in arch/powerpc/tools/head_check.sh
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Fold in fix from Nick for 4.6 era toolchains]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Direct banches from code below __end_interrupts to code above
__end_interrupts when built with CONFIG_RELOCATABLE are disallowed
because they will break when the kernel is not located at 0.
Sample output:
WARNING: Unrelocated relative branches
c000000000000118 bl-> 0xc000000000038fb8 <pnv_restore_hyp_resource>
c00000000000013c b-> 0xc0000000001068a4 <kvm_start_guest>
c000000000000148 b-> 0xc00000000003919c <pnv_wakeup_loss>
c00000000000014c b-> 0xc00000000003923c <pnv_wakeup_noloss>
c0000000000005a4 b-> 0xc000000000106ffc <kvmppc_interrupt_hv>
c000000000001af0 b-> 0xc000000000106ffc <kvmppc_interrupt_hv>
c000000000001b24 b-> 0xc000000000106ffc <kvmppc_interrupt_hv>
c000000000001b58 b-> 0xc000000000106ffc <kvmppc_interrupt_hv>
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Move a couple of existing scripts under there. Remove scripts directory:
a script is a tool, a tool is not a script.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Russell Currey
Stephen Rothwell
Bill Wendling
Geoff Levand
Alexandre Ghiti
Michael Ellerman
Thomas Gleixner
Nicholas Piggin
Greg Kroah-Hartman