Граф коммитов

26 Коммитов

Автор SHA1 Сообщение Дата
Peter Zijlstra 9833f8cb95 lockstat: warn about disabled lock debugging
Avoid confusion and clearly state lock debugging got disabled.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-14 23:28:28 +01:00
Peter Zijlstra f510b233cf lockdep: get_user_chars() redo
Generic, states independent, get_user_chars().

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-14 23:28:22 +01:00
Peter Zijlstra 4fc95e867f lockdep: sanitize bit names
s/\(LOCKF\?_ENABLED_[^ ]*\)S\(_READ\)\?\>/\1\2/g

So that the USED_IN and ENABLED have the same names.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-14 23:27:51 +01:00
Nick Piggin cf40bd16fd lockdep: annotate reclaim context (__GFP_NOFS)
Here is another version, with the incremental patch rolled up, and
added reclaim context annotation to kswapd, and allocation tracing
to slab allocators (which may only ever reach the page allocator
in rare cases, so it is good to put annotations here too).

Haven't tested this version as such, but it should be getting closer
to merge worthy ;)

--
After noticing some code in mm/filemap.c accidentally perform a __GFP_FS
allocation when it should not have been, I thought it might be a good idea to
try to catch this kind of thing with lockdep.

I coded up a little idea that seems to work. Unfortunately the system has to
actually be in __GFP_FS page reclaim, then take the lock, before it will mark
it. But at least that might still be some orders of magnitude more common
(and more debuggable) than an actual deadlock condition, so we have some
improvement I hope (the concept is no less complete than discovery of a lock's
interrupt contexts).

I guess we could even do the same thing with __GFP_IO (normal reclaim), and
even GFP_NOIO locks too... but filesystems will have the most locks and fiddly
code paths, so let's start there and see how it goes.

It *seems* to work. I did a quick test.

=================================
[ INFO: inconsistent lock state ]
2.6.28-rc6-00007-ged31348-dirty #26
---------------------------------
inconsistent {in-reclaim-W} -> {ov-reclaim-W} usage.
modprobe/8526 [HC0[0]:SC0[0]:HE1:SE1] takes:
 (testlock){--..}, at: [<ffffffffa0020055>] brd_init+0x55/0x216 [brd]
{in-reclaim-W} state was registered at:
  [<ffffffff80267bdb>] __lock_acquire+0x75b/0x1a60
  [<ffffffff80268f71>] lock_acquire+0x91/0xc0
  [<ffffffff8070f0e1>] mutex_lock_nested+0xb1/0x310
  [<ffffffffa002002b>] brd_init+0x2b/0x216 [brd]
  [<ffffffff8020903b>] _stext+0x3b/0x170
  [<ffffffff80272ebf>] sys_init_module+0xaf/0x1e0
  [<ffffffff8020c3fb>] system_call_fastpath+0x16/0x1b
  [<ffffffffffffffff>] 0xffffffffffffffff
irq event stamp: 3929
hardirqs last  enabled at (3929): [<ffffffff8070f2b5>] mutex_lock_nested+0x285/0x310
hardirqs last disabled at (3928): [<ffffffff8070f089>] mutex_lock_nested+0x59/0x310
softirqs last  enabled at (3732): [<ffffffff8061f623>] sk_filter+0x83/0xe0
softirqs last disabled at (3730): [<ffffffff8061f5b6>] sk_filter+0x16/0xe0

other info that might help us debug this:
1 lock held by modprobe/8526:
 #0:  (testlock){--..}, at: [<ffffffffa0020055>] brd_init+0x55/0x216 [brd]

stack backtrace:
Pid: 8526, comm: modprobe Not tainted 2.6.28-rc6-00007-ged31348-dirty #26
Call Trace:
 [<ffffffff80265483>] print_usage_bug+0x193/0x1d0
 [<ffffffff80266530>] mark_lock+0xaf0/0xca0
 [<ffffffff80266735>] mark_held_locks+0x55/0xc0
 [<ffffffffa0020000>] ? brd_init+0x0/0x216 [brd]
 [<ffffffff802667ca>] trace_reclaim_fs+0x2a/0x60
 [<ffffffff80285005>] __alloc_pages_internal+0x475/0x580
 [<ffffffff8070f29e>] ? mutex_lock_nested+0x26e/0x310
 [<ffffffffa0020000>] ? brd_init+0x0/0x216 [brd]
 [<ffffffffa002006a>] brd_init+0x6a/0x216 [brd]
 [<ffffffffa0020000>] ? brd_init+0x0/0x216 [brd]
 [<ffffffff8020903b>] _stext+0x3b/0x170
 [<ffffffff8070f8b9>] ? mutex_unlock+0x9/0x10
 [<ffffffff8070f83d>] ? __mutex_unlock_slowpath+0x10d/0x180
 [<ffffffff802669ec>] ? trace_hardirqs_on_caller+0x12c/0x190
 [<ffffffff80272ebf>] sys_init_module+0xaf/0x1e0
 [<ffffffff8020c3fb>] system_call_fastpath+0x16/0x1b

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-14 23:27:49 +01:00
Peter Zijlstra c7e78cff6b lockstat: contend with points
We currently only provide points that have to wait on contention, also
lists the points we have to wait for.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-20 15:43:10 +02:00
Peter Zijlstra 6918bc5c83 lockstat: fixup signed division
Some recent modification to this code made me notice the little todo mark.
Now that we have more elaborate 64-bit division functions this isn't hard.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-23 16:19:37 +02:00
Joe Korty 2189459d25 lockstat: fix numerical output rounding error
Fix rounding error in /proc/lock_stat numerical output.

On occasion the two digit fractional part contains the three
digit value '100'.  This is due to a bug in the rounding algorithm
which pushes values in the range '95..99' to '100' rather than
to '00' + an increment to the integer part.  For example,

	- 123456.100      old display
	+ 123457.00	  new display

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-26 10:37:46 +02:00
Stephen Hemminger df60a84418 lockdep: fix build if CONFIG_PROVE_LOCKING not defined
If CONFIG_PROVE_LOCKING not defined, then no dependency information
is available.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-15 19:22:04 +02:00
Rabin Vincent 8bfe0298f7 lockdep: handle chains involving classes defined in modules
Solve this by marking the classes as unused and not printing information
about the unused classes.

Reported-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Rabin Vincent <rabin@rab.in>
Acked-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-11 09:30:26 +02:00
David Miller 419ca3f135 lockdep: fix combinatorial explosion in lock subgraph traversal
When we traverse the graph, either forwards or backwards, we
are interested in whether a certain property exists somewhere
in a node reachable in the graph.

Therefore it is never necessary to traverse through a node more
than once to get a correct answer to the given query.

Take advantage of this property using a global ID counter so that we
need not clear all the markers in all the lock_class entries before
doing a traversal.  A new ID is choosen when we start to traverse, and
we continue through a lock_class only if it's ID hasn't been marked
with the new value yet.

This short-circuiting is essential especially for high CPU count
systems.  The scheduler has a runqueue per cpu, and needs to take
two runqueue locks at a time, which leads to long chains of
backwards and forwards subgraphs from these runqueue lock nodes.
Without the short-circuit implemented here, a graph traversal on
a runqueue lock can take up to (1 << (N - 1)) checks on a system
with N cpus.

For anything more than 16 cpus or so, lockdep will eventually bring
the machine to a complete standstill.

Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-31 18:38:28 +02:00
Huang, Ying cd1a28e845 lockdep: add lock_class information to lock_chain and output it
It is based on x86/master branch of git-x86 tree, and has been tested
on x86_64 platform.

ChangeLog:

v2:

- Enclosing proc file system related code into CONFIG_PROVE_LOCKING.

- Fix nr_chain_hlocks update code.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-24 01:28:20 +02:00
Huang, Ying 443cd507ce lockdep: add lock_class information to lock_chain and output it
This patch records array of lock_class into lock_chain, and export
lock_chain information via /proc/lockdep_chains.

It is based on x86/master branch of git-x86 tree, and has been tested
on x86_64 platform.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-20 12:21:33 +02:00
Huang, Ying 2429e4ee78 lockdep: output lock_class key instead of address for forward dependency output
The key instead of address of lock_class should be output in
/proc/lockdep when forward dependency is output, because key is
output for lock_class itself as identifier too.

This patch is based on x86/auto-latest branch of git-x86 tree, and has
been tested on x86_64 platform.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-13 08:55:01 +02:00
Denis V. Lunev c33fff0afb kernel: use non-racy method for proc entries creation
Use proc_create()/proc_create_data() to make sure that ->proc_fops and ->data
be setup before gluing PDE to main tree.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:22 -07:00
Tim Pepper 94c61c0aef lockdep: Avoid /proc/lockdep & lock_stat infinite output
Both /proc/lockdep and /proc/lock_stat output may loop infinitely.

When a read() requests an amount of data smaller than the amount of data
that the seq_file's foo_show() outputs, the output starts looping and
outputs the "stuck" element's data infinitely.  There may be multiple
sequential calls to foo_start(), foo_next()/foo_show(), and foo_stop()
for a single open with sequential read of the file.  The _start() does not
have to start with the 0th element and _show() might be called multiple
times in a row for the same element for a given open/read of the seq_file.

Also header output should not be happening in _start().  All output should
be in _show(), which SEQ_START_TOKEN is meant to help.  Having output in
_start() may also negatively impact seq_file's seq_read() and traverse()
accounting.

Signed-off-by: Tim Pepper <lnxninja@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Al Viro <viro@ftp.linux.org.uk>
2007-10-11 22:11:11 +02:00
Alexey Dobriyan c0f3358621 Fix leak on /proc/lockdep_stats
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31 15:39:40 -07:00
Peter Zijlstra d38e1d5aae lockstat: better class name representation
optionally add class->name_version and class->subclass to the class name

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:49 -07:00
Peter Zijlstra 96645678cd lockstat: measure lock bouncing
__acquire
        |
       lock _____
        |        \
        |    __contended
        |         |
        |        wait
        | _______/
        |/
        |
   __acquired
        |
   __release
        |
     unlock

We measure acquisition and contention bouncing.

This is done by recording a cpu stamp in each lock instance.

Contention bouncing requires the cpu stamp to be set on acquisition. Hence we
move __acquired into the generic path.

__acquired is then used to measure acquisition bouncing by comparing the
current cpu with the old stamp before replacing it.

__contended is used to measure contention bouncing (only useful for preemptable
locks)

[akpm@linux-foundation.org: cleanups]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:49 -07:00
Peter Zijlstra 4b32d0a4e9 lockdep: various fixes
- update the copyright notices
 - use the default hash function
 - fix a thinko in a BUILD_BUG_ON
 - add a WARN_ON to spot inconsitent naming
 - fix a termination issue in /proc/lock_stat

[akpm@linux-foundation.org: cleanups]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:49 -07:00
Peter Zijlstra c46261de0d lockstat: human readability tweaks
Present all this fancy new lock statistics information:

*warning, _wide_ output ahead*

(output edited for purpose of brevity)

 # cat /proc/lock_stat
lock_stat version 0.1
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
                              class name    contentions   waittime-min   waittime-max waittime-total   acquisitions   holdtime-min   holdtime-max holdtime-total
-----------------------------------------------------------------------------------------------------------------------------------------------------------------

                         &inode->i_mutex:         14458           6.57      398832.75     2469412.23        6768876           0.34    11398383.65   339410830.89
                         ---------------
                         &inode->i_mutex           4486          [<ffffffff802a08f9>] pipe_wait+0x86/0x8d
                         &inode->i_mutex              0          [<ffffffff802a01e8>] pipe_write_fasync+0x29/0x5d
                         &inode->i_mutex              0          [<ffffffff802a0e18>] pipe_read+0x74/0x3a5
                         &inode->i_mutex              0          [<ffffffff802a1a6a>] do_lookup+0x81/0x1ae

.................................................................................................................................................................

              &inode->i_data.tree_lock-W:           491           0.27          62.47         493.89        2477833           0.39         468.89     1146584.25
              &inode->i_data.tree_lock-R:            65           0.44           4.27          48.78       26288792           0.36         184.62    10197458.24
              --------------------------
                &inode->i_data.tree_lock             46          [<ffffffff80277095>] __do_page_cache_readahead+0x69/0x24f
                &inode->i_data.tree_lock             31          [<ffffffff8026f9fb>] add_to_page_cache+0x31/0xba
                &inode->i_data.tree_lock              0          [<ffffffff802770ee>] __do_page_cache_readahead+0xc2/0x24f
                &inode->i_data.tree_lock              0          [<ffffffff8026f6e4>] find_get_page+0x1a/0x58

.................................................................................................................................................................

                      proc_inum_idr.lock:             0           0.00           0.00           0.00             36           0.00          65.60         148.26
                        proc_subdir_lock:             0           0.00           0.00           0.00        3049859           0.00         106.81     1563212.42
                        shrinker_rwsem-W:             0           0.00           0.00           0.00              5           0.00           1.73           3.68
                        shrinker_rwsem-R:             0           0.00           0.00           0.00            633           2.57         246.57       10909.76

'contentions' and 'acquisitions' are the number of such events measured (since
the last reset). The waittime- and holdtime- (min, max, total) numbers are
presented in microseconds.

If there are any contention points, the lock class is presented in the block
format (as i_mutex and tree_lock above), otherwise a single line of output is
presented.

The output is sorted on absolute number of contentions (read + write), this
should get the worst offenders presented first, so that:

 # grep : /proc/lock_stat | head

will quickly show who's bad.

The stats can be reset using:

 # echo 0 > /proc/lock_stat

[bunk@stusta.de: make 2 functions static]
[akpm@linux-foundation.org: fix printk warning]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:49 -07:00
Peter Zijlstra 8e18257d29 lockdep: reduce the ifdeffery
Move code around to get fewer but larger #ifdef sections.  Break some
in-function #ifdefs out into their own functions.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:49 -07:00
Tim Schmielau cd354f1ae7 [PATCH] remove many unneeded #includes of sched.h
After Al Viro (finally) succeeded in removing the sched.h #include in module.h
recently, it makes sense again to remove other superfluous sched.h includes.
There are quite a lot of files which include it but don't actually need
anything defined in there.  Presumably these includes were once needed for
macros that used to live in sched.h, but moved to other header files in the
course of cleaning it up.

To ease the pain, this time I did not fiddle with any header files and only
removed #includes from .c-files, which tend to cause less trouble.

Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
configs in arch/arm/configs on arm.  I also checked that no new warnings were
introduced by the patch (actually, some warnings are removed that were emitted
by unnecessarily included header files).

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:54 -08:00
Robert P. J. Day 501b9ebf43 [PATCH] Fix apparent typo CONFIG_LOCKDEP_DEBUG
Replace the apparent typo CONFIG_LOCKDEP_DEBUG with the correct
CONFIG_DEBUG_LOCKDEP.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11 11:18:06 -08:00
Jason Baron 068135e635 [PATCH] lockdep: add graph depth information to /proc/lockdep
Generate locking graph information into /proc/lockdep, for lock hierarchy
documentation and visualization purposes.

sample output:

 c089fd5c OPS:     138 FD:   14 BD:    1 --..: &tty->termios_mutex
  -> [c07a3430] tty_ldisc_lock
  -> [c07a37f0] &port_lock_key
  -> [c07afdc0] &rq->rq_lock_key#2

The lock classes listed are all the first-hop lock dependencies that
lockdep has seen so far.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11 10:51:26 -08:00
Helge Deller 15ad7cdcfd [PATCH] struct seq_operations and struct file_operations constification
- move some file_operations structs into the .rodata section

 - move static strings from policy_types[] array into the .rodata section

 - fix generic seq_operations usages, so that those structs may be defined
   as "const" as well

[akpm@osdl.org: couple of fixes]
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:46 -08:00
Ingo Molnar a8f24a3978 [PATCH] lockdep: procfs
Lock validator /proc/lockdep and /proc/lockdep_stats support.
(FIXME: should go into debugfs)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 15:27:04 -07:00