This patch adds aes-gcm support to crypto4xx.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch enhances existing interfaces and
functions to support AEAD ciphers in the next
patches.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Thanks to the big overhaul of crypto4xx_build_pd(), the request-local
sa_in, sa_out and state_record allocation can be simplified.
There's no need to setup any dma coherent memory anymore and
much of the support code can be removed.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If the crypto4xx device is continuously loaded by dm-crypt
and ipsec work, it will start to work intermittent after a
few (between 20-30) seconds, hurting throughput and latency.
This patch contains various stability improvements in order
to fix this issue. So far, the hardware has survived more
than a day without suffering any stalls under the continuous
load.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto4xx_core.c:179:6: warning: symbol 'crypto4xx_free_state_record'
was not declared. Should it be static?
crypto4xx_core.c:331:5: warning: symbol 'crypto4xx_get_n_gd'
was not declared. Should it be static?
crypto4xx_core.c:652:6: warning: symbol 'crypto4xx_return_pd'
was not declared. Should it be static?
crypto4xx_return_pd() is not used by anything. Therefore it is removed.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch overhauls and fixes code related to crypto4xx_build_pd()
* crypto4xx_build_pd() did not handle chained source scatterlist.
This is fixed by replacing the buggy indexed-access of &src[idx]
with sg_next() in the gather array setup loop.
* The redundant is_hash, direction, save_iv and pd_ctl members
in the crypto4xx_ctx struct have been removed.
- is_hash can be derived from the crypto_async_request parameter.
- direction is already part of the security association's
bf.dir bitfield.
- save_iv is unused.
- pd_ctl always had the host_ready bit enabled anyway.
(the hash_final case is rather pointless, since the ahash
code has been deactivated).
* make crypto4xx_build_pd()'s caller responsible for converting
the IV to the LE32 format.
* change crypto4xx_ahash_update() and crypto4xx_ahash_digest() to
initialize a temporary destination scatterlist. This allows the
removal of an ugly cast of req->result (which is a pointer to an
u8-array) to a scatterlist pointer.
* change crypto4xx_build_pd() return type to int. After all
it returns -EINPROGRESS/-EBUSY.
* fix crypto4xx_build_pd() thread-unsafe sa handling.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The hardware expects that the keys, IVs (and inner/outer hashes)
are in the le32 format.
This patch changes all hardware interface declarations to use
the correct LE32 data format for each field.
In order to pass __CHECK_ENDIAN__ checks, crypto4xx_memcpy_le
has to be honest about the endianness of its parameters.
The function was split and moved to the common crypto4xx_core.h
header. This allows the compiler to generate better code if the
sizes/len is a constant (various *_IV_LEN).
Please note that the hardware isn't consistent with the endiannes
of the save_digest field in the state record struct though.
The hashes produced by GHASH and CBC (for CCM) will be in LE32.
Whereas md5 and sha{1/,256,...} do not need any conversion.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Previously, If the crypto4xx driver used all available
security contexts, it would simply refuse new requests
with -EAGAIN. CRYPTO_TFM_REQ_MAY_BACKLOG was ignored.
in case of dm-crypt.c's crypt_convert() function this was
causing the following errors to manifest, if the system was
pushed hard enough:
| EXT4-fs warning (dm-1): ext4_end_bio:314: I/O error -5 writing to ino ..
| EXT4-fs warning (dm-1): ext4_end_bio:314: I/O error -5 writing to ino ..
| EXT4-fs warning (dm-1): ext4_end_bio:314: I/O error -5 writing to ino ..
| JBD2: Detected IO errors while flushing file data on dm-1-8
| Aborting journal on device dm-1-8.
| EXT4-fs error : ext4_journal_check_start:56: Detected aborted journal
| EXT4-fs (dm-1): Remounting filesystem read-only
| EXT4-fs : ext4_writepages: jbd2_start: 2048 pages, inode 498...; err -30
(This did cause corruptions due to failed writes)
To fix this mess, the crypto4xx driver needs to notifiy the
user to slow down. This can be achieved by returning -EBUSY
on requests, once the crypto hardware was falling behind.
Note: -EBUSY has two different meanings. Setting the flag
CRYPTO_TFM_REQ_MAY_BACKLOG implies that the request was
successfully queued, by the crypto driver. To achieve this
requirement, the implementation introduces a threshold check and
adds logic to the completion routines in much the same way as
AMD's Cryptographic Coprocessor (CCP) driver do.
Note2: Tests showed that dm-crypt starved ipsec traffic.
Under load, ipsec links dropped to 0 Kbits/s. This is because
dm-crypt's callback would instantly queue the next request.
In order to not starve ipsec, the driver reserves a small
portion of the available crypto contexts for this purpose.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
I used aes-cbc as a template for ofb. But sadly I forgot
to update set_key method to crypto4xx_setkey_aes_ofb().
this was caught by the testmgr:
alg: skcipher: Test 1 failed (invalid result) on encr. for ofb-aes-ppc4xx
00000000: 76 49 ab ac 81 19 b2 46 ce e9 8e 9b 12 e9 19 7d
00000010: 50 86 cb 9b 50 72 19 ee 95 db 11 3a 91 76 78 b2
00000020: 73 be d6 b8 e3 c1 74 3b 71 16 e6 9e 22 22 95 16
00000030: 3f f1 ca a1 68 1f ac 09 12 0e ca 30 75 86 e1 a7
With the correct set_key method, the aes-ofb cipher passes the test.
name : ofb(aes)
driver : ofb-aes-ppc4xx
module : crypto4xx
priority : 300
refcnt : 1
selftest : passed
internal : no
type : ablkcipher
async : yes
blocksize : 16
min keysize : 16
max keysize : 32
ivsize : 16
geniv : <default>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch improves the readability of various functions,
by replacing various void* pointers declarations with
their respective structs *. This makes it possible to go
for the eye-friendly array-indexing methods.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If one of the later memory allocations in rypto4xx_build_pdr()
fails: dev->pdr (and/or) dev->pdr_uinfo wouldn't be freed.
crypto4xx_build_sdr() has the same issue with dev->sdr.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
scatter_buffer_size is always set to PPC4XX_SD_BUFFER_SIZE.
I don't think there's any point in keeping the variable
around.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch refactors the crypto4xx_copy_pkt_to_dst() to use
scatterwalk_map_and_copy() to copy the processed data between
the crypto engine's scatter ring buffer and the destination
specified by the ablkcipher_request.
This also makes the crypto4xx_fill_one_page() function redundant.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The crypto engine supports more than just aes-cbc. This patch
enables the remaining AES block cipher modes that pass the
testmanager's test vectors.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto4xx_put_pd_to_pdr() already clears the flag.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The security offload function is performed by a cryptographic
engine core attached to the 128-bit PLB (processor local bus)
with builtin DMA and interrupt controllers. This, I think,
satisfies the requirement for the CRYPTO_ALG_KERN_DRIVER_ONLY
flag.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch removes several unused code and definitons
(structs, variables, ...).
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
alg entries are only added to the list, after the registration
was successful. If the registration failed, it was never added
to the list in the first place.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If 'kzalloc' fails, we return 0 which means success.
return -ENOMEM instead as already done a few lines above.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
trivial spelling mistake, missing r, rename to ce_ring_control
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The size used in 'dma_free_coherent()' looks un-initialized here.
ctx->sa_len is set a few lines below and is apparently not set by the
caller.
So use 'size' as in the corresponding 'dma_alloc_coherent()' a few lines
above.
This has been spotted with coccinelle, using the following script:
////////////////////
@r@
expression x0, x1, y0, y1, z0, z1, t0, t1, ret;
@@
* ret = dma_alloc_coherent(x0, y0, z0, t0);
...
* dma_free_coherent(x1, y1, ret, t1);
@script:python@
y0 << r.y0;
y1 << r.y1;
@@
if y1.find(y0) == -1:
print "WARNING: sizes look different: '%s' vs '%s'" % (y0, y1)
////////////////////
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch integrates the ppc4xx-rng driver into the existing
crypto4xx. This is because the true random number generator
is controlled and part of the security core.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The sg_nents_for_len() function could fail, this patch add a check for
its return value.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The get_sg_count function of amcc is the same as sg_nents_for_len from
lib/scatterlist.c
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This platform driver has a OF device ID table but the OF module
alias information is not created so module autoloading won't work.
Signed-off-by: Luis de Bethencourt <luis@debethencourt.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Compare pointer-typed values to NULL rather than 0.
The semantic patch that makes this change is available
in scripts/coccinelle/null/badzero.cocci
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Even if bus is not hot-pluggable, the devices can be bound and unbound
from the driver via sysfs, so we should not be using __init/__exit
annotations on probe() and remove() methods. The only exception is
drivers registered with platform_driver_probe() which specifically
disables sysfs bind/unbind attributes.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
References to __exit functions must be wrapped with __exit_p.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Robert Jennings <rcj@linux.vnet.ibm.com>
Cc: Marcelo Henrique Cerri <mhcerri@linux.vnet.ibm.com>
Cc: Fionnuala Gunter <fin@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Driver core sets it to NULL upon probe failure or release.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit b5b4bb3f6a (of: only include prom.h on sparc) removed implicit
includes of of_*.h headers by powerpc's prom.h. Some components were
missed in initial clean-up patch, so add the necessary includes to fix
powerpc builds.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-ide@vger.kernel.org
Cc: linux-crypto@vger.kernel.org
Convert a nonnegative error return code to a negative one, as returned
elsewhere in the function.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
{ ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
when != &ret
*if(...)
{
... when != ret = e2
when forall
return ret;
}
// </smpl>
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move the err_request_irq error label up to reflect that tasklet_init and
irq_of_parse_and_map have taken place.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch converts the drivers in drivers/crypto/* to use the
module_platform_driver() macro which makes the code smaller and a bit
simpler.
Cc: James Hsiao <jhsiao@amcc.com>
Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Cc: Kim Phillips <kim.phillips@freescale.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Vladimir Zapolskiy <vzapolskiy@gmail.com>
Acked-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The Security function on the AMCC SoCs has multiple engines within a
single MMIO range. The crypto driver currently enables the 3DES
functionality by doing a blind write to the device control register.
This can unintentionally disable other functions like the PKA or TRNG
when the driver is loaded.
Perform a read/modify/write to enable the 3DES function instead.
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Get rid of old users of of_platform_driver in arch/powerpc. Most
of_platform_driver users can be converted to use the platform_bus
directly.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
of_device is just an alias for platform_device, so remove it entirely. Also
replace to_of_device() with to_platform_device() and update comment blocks.
This patch was initially generated from the following semantic patch, and then
edited by hand to pick up the bits that coccinelle didn't catch.
@@
@@
-struct of_device
+struct platform_device
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Reviewed-by: David S. Miller <davem@davemloft.net>
Fixes build error caused by the OF device_node
pointer being moved into struct device
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
.name, .match_table and .owner are duplicated in both of_platform_driver
and device_driver. This patch is a removes the extra copies from struct
of_platform_driver and converts all users to the device_driver members.
This patch is a pretty mechanical change. The usage model doesn't change
and if any drivers have been missed, or if anything has been fixed up
incorrectly, then it will fail with a compile time error, and the fixup
will be trivial. This patch looks big and scary because it touches so
many files, but it should be pretty safe.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Sean MacLennan <smaclennan@pikatech.com>
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
From: Márton Németh <nm127@freemail.hu>
The match_table field of the struct of_device_id is constant in <linux/of_platform.h>
so it is worth to make the initialization data also constant.
The semantic match that finds this kind of pattern is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@r@
disable decl_init,const_decl_init;
identifier I1, I2, x;
@@
struct I1 {
...
const struct I2 *x;
...
};
@s@
identifier r.I1, y;
identifier r.x, E;
@@
struct I1 y = {
.x = E,
};
@c@
identifier r.I2;
identifier s.E;
@@
const struct I2 E[] = ... ;
@depends on !c@
identifier r.I2;
identifier s.E;
@@
+ const
struct I2 E[] = ...;
// </smpl>
Signed-off-by: Márton Németh <nm127@freemail.hu>
Cc: Julia Lawall <julia@diku.dk>
Cc: cocci@diku.dk
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The crypto4xx SHA implementation keeps the hash state in the tfm
data structure. This breaks a fundamental requirement of ahash
implementations that they must be reentrant.
This patch disables the broken implementation.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch changes crypto4xx to use the new style ahash type.
In particular, we now use ahash_alg to define ahash algorithms
instead of crypto_alg.
This is achieved by introducing a union that encapsulates the
new type and the existing crypto_alg structure. They're told
apart through a u32 field containing the type value.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch makes crypto4xx use crypto_ahash_set_reqsize to avoid
accessing crypto_ahash directly.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for AMCC ppc4xx security device driver. This is the
initial release that includes the driver framework with AES and SHA1 algorithms
support.
The remaining algorithms will be released in the near future.
Signed-off-by: James Hsiao <jhsiao@amcc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Christian Lamparter
Christian Lamparter
Christophe Jaillet
Colin Ian King
LABBE Corentin
Luis de Bethencourt
Fabio Estevam
Dmitry Torokhov
Wolfram Sang
Jean Delvare
Sachin Kamat
Rob Herring
Peter Senna Tschudin
Julia Lawall
Axel Lin
Josh Boyer
Grant Likely
Anatolij Gustschin
Tejun Heo
Márton Németh
Herbert Xu
James Hsiao