Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
Hi,
the DMA trace implementation on AMD platform assumes that the stream_tag pointer
is pointing the stream_tag member of struct sof_ipc_dma_trace_params_ext, which
is true at the moment, but it can not be guarantied and a change in the dtrace
core can cause out of bound accesses for AMD.
For this reason, change the API to pass the struct itself which will remove the
assumption and makes it clear from both sides what is expected to be sent via the
parameter list.
This opens up a window to clean up the intel and AMD implementation at the same
time.
Regards,
Peter
---
Peter Ujfalusi (2):
ASoC: SOF: intel: hda-trace: Pass the dma buffer pointer to
hda_dsp_trace_prepare
ASoC: SOF: dma-trace: Pass pointer to params_ext struct in
trace_init()
sound/soc/sof/amd/acp-trace.c | 38 ++++++++-------------------------
sound/soc/sof/amd/acp.h | 3 ++-
sound/soc/sof/intel/hda-trace.c | 17 ++++++++-------
sound/soc/sof/intel/hda.h | 3 ++-
sound/soc/sof/ops.h | 4 ++--
sound/soc/sof/sof-priv.h | 2 +-
sound/soc/sof/trace.c | 2 +-
7 files changed, 26 insertions(+), 43 deletions(-)
--
2.35.0
Implement snd_compress_ops. There are a lot of similarities with
PCM implementation.
For now we use sof_ipc_pcm_params to transfer compress parameters to SOF
firmware.
This will be changed in the future once we either add new compress
parameters to SOF or enhance existing sof_ipc_pcm_params structure
to support all native compress params.
Note that get_caps and get_codec_caps are missing and will be added
later. This is because we need to find a way to advertise DSP
capabilities depending on supported platforms.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20220120143741.492634-1-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of passing a pointer to the stream_tag within the
struct sof_ipc_dma_trace_params_ext, pass the pointer to the containing
struct.
AMD needs to update buffer.phy_addr (and don't really use the stream_tag)
for the trace implementation.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220128123623.23569-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pass the snd_dma_buffer pointer as parameter to hda_dsp_trace_prepare()
function.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220128123623.23569-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The sof_ipc_tx_message does not have support for async operations.
There is no need to allocate a buffer and copy each message to it to be
sent to the DSP, we can use the passed message data pointer directly.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220128133620.9411-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The snd_sof_ipc_msg.header is not used by platform code, there is no need
to update it and the 'header' parameter for sof_ipc_tx_message_unlocked()
can be dropped at the same time.
Instead of using the header parameter passed by the caller (which does by
setting it to the hdr->cmd) use the hdr->cmd directly when logging.
At the same time make sure that there is a message passed to the tx_message
function.
All instances of the tx_message passes an IPC message, this check is placed
to make sure the future users can not introduce bugs.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220128133620.9411-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of first checking the msg->header (which is the hdr.cmd), use
directly the cmd from the message itself.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220128133620.9411-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The first count check and fixup against "buffer - lpos" can be removed as
we will do the adjustment later against the "avail" in
sof_dfsentry_trace_read()
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220128120627.18443-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The limitation to assign a link DMA channel for a BE iff the
corresponding host DMA channel is assigned to a connected FE is only
applicable if the PROCEN_FMT_QUIRK is set. So, remove it for platforms
that do not enable the quirk.
Complements: a792bfc1c2 ("ASoC: SOF: Intel: hda-stream: limit PROCEN workaround")
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220128130017.28508-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Make sure the device version is taken into account when selecting a
machine driver, in addition to device manufacturer and part_id, and
simplify code with a macro.
We can exclude the sdw unique id and compare the sdw adr directly when
we are finding out identical parts.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220120232157.199919-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Codecs with the same part id, manufacturer id and part id, but different
sdw version should be treated as different codecs. For example, rt711 and
rt711-sdca are different. So, we should match sdw version as well.
Reported-by: Reddy Muralidhar <muralidhar.reddy@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220120232157.199919-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add flag _IGNORE_D3_PERSISTENT to disable IMR restore feature to
the sof_debug module parameter.
The IMR restore feature will be enabled for all Intel cAVS platforms by
default, but setting the flag _IGNORE_D3_PERSISTENT can help to disable
the feature for debug purpose, to rule out any possible regression
introduced by the change of not re-downloading firmware to the DSP at
resuming from suspended state.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220120231532.196926-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If the firmware declares the IMR restore feature, we only need to do a
simple powering up to resume from D3, no firmware re-downloading
needed - the context is saved/restored to/from IMR without needing
driver support.
Add a hda_dsp_boot_imr() helper for this simple DSP reboot, and use it
when it is available.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220120231532.196926-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the SSP clock configuration to the hda_set_ssp_cbp_cfp() helper,
to be used in follow-up patches
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220120231532.196926-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We introduced provider/consumer terms, and CBP_CFP acronyms for codec
drivers, let's use them as well in SOF.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220120231532.196926-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Overloading the tx_mask with a linear value is asking for trouble and
only works because the codec_dai hw_params() is called before the
cpu_dai hw_params().
Move to the more generic set_stream() API to pass the hdac_stream
information.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211224021034.26635-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We don't really need to pass a substream to the callback, we only need
the direction. No functionality change, only simplification to enable
improve suspend with paused streams.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20211224021034.26635-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have a helper, use it to simplify widget lookup
Suggested-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211224021034.26635-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If the user requested to see all dumps (even the optional ones) then use
KERN_DEBUG level for the optional dumps as they are only for debugging
purposes.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211223113628.18582-21-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If the user requested to see all dumps (even the optional ones) then use
KERN_DEBUG level for the optional dumps as they are only for debugging
purposes.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211223113628.18582-20-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Update the comment for the global SOF level debug flags and add one for
the flags used to control the DSP dump functionality.
Document the expected behavior when the SOF_DBG_DUMP_OPTIONAL is passed
for the DSP dump:
Only print the dump if SOF_DBG_PRINT_ALL_DUMPS is set
Print must use KERN_DEBUG log level
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211223113628.18582-19-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The snd_sof_get_status() is not the best name for a function which in fact
is tasked to print out DSP oops and stack. Rename it to
sof_print_oops_and_stack().
At the same time add a new parameter to specify the desired kernel log
level to be used for the prints.
When updating the users of the function, pass KERN_ERR for now to make sure
that there is no functional change happens.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211223113628.18582-18-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To allow custom log level to be used for the DSP oops and stack print, add
a kernel log level parameter to the two ops.
Modify the xtensa oops and stack functions tom use this new log level
parameter.
Pass KER_ERR from snd_sof_get_status() to make sure that there is no
functional change with this new parameter.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211223113628.18582-17-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Never suppress the DSP panic dump as it is always originates from an
assert() or panic() call within the firmware.
Use different message for DSP panics when there will be recovery attempt
going to be done compared to a definitive DSP panic.
Suggested-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211223113628.18582-16-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Update the state flow diagram to reflect the current implementation.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211223113628.18582-15-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Try to force the DSP to be turned off next time if the fw_state is either
CRASHED or BOOT_FAILED when a suspend happens in order to attempt a clean
boot to recover.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211223113628.18582-14-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the fw_state to SOF_FW_BOOT_FAILED if we encountered an error during
booting the firmware.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211223113628.18582-13-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If the state of the firmware is not BOOT_COMPLETE, it means that the
firmware is not functioning, thus it is not capable of handling IPC
messages.
Do not try to send IPC if the state is not BOOT_COMPLETE
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211223113628.18582-12-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since there is nothing SND about the firmware state, rename the enum
from `snd_sof_fw_state` to simply `sof_fw_state`
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Link: https://lore.kernel.org/r/20211223113628.18582-11-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the enum snd_sof_fw_state to include/sound/sof.h to be accessible
outside of the core SOF stack.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Link: https://lore.kernel.org/r/20211223113628.18582-10-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SOF_FW_BOOT_READY_OK fw_state indicates that the boot ready message has
been received and there were no errors found.
The SOF_FW_BOOT_COMPLETE state will be reached after the
snd_sof_dsp_post_fw_run() completes without error.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Link: https://lore.kernel.org/r/20211223113628.18582-9-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SOF_FW_CRASHED state is meant to indicate the unfortunate case when the
firmware has crashed after a successful boot.
IPC tx timeout is not treated as indication of a firmware crash as it tends
to happen regularly while the firmware is operational.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Link: https://lore.kernel.org/r/20211223113628.18582-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When snd_sof_dsp_dbg_dump() is called we have an explanatory message to
give some hint on the reason why we have the dump on the caller level.
Pass this message to snd_sof_dsp_dbg_dump() and handle the print according
to the dump rules.
This way we can finally print information on the HDA boot iteration if all
dumps are enabled.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211223113628.18582-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some platforms use retries during firmware boot to overcome DSP startup
issues.
In these cases we might receive a DSP panic message which should not be
treated as fatal if it happens during boot.
Pass this information to snd_sof_dsp_panic() and omit the panic print if
it is not fatal or the user does not want to see all dumps.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211223113628.18582-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The sof_debug_check_flag() is available for checking flags set in
sof_core_debug.
sof_core_debug can be marked static in core.c
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211223113628.18582-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The sof_debug_check_flag() can be used to check a flag or a combination of
them in sof_core_debug.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211223113628.18582-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
HDA_FW_BOOT_ATTEMPTS is defined in hda.h, do not define it again locally
in hda-loader.c
At the same time correct the indentation for the define in hda.h
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211223113628.18582-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Catch the cases when the stored sdev->dsp_oops_offset and the offset
received via the panic message differs and print a warning, but keep using
the dsp_oops_offset for the oops query.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211223113628.18582-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/sof/amd/acp.c:222:9: warning: Identical condition and return
expression 'ret', return value is always 0
[identicalConditionAfterEarlyExit]
return ret;
^
sound/soc/sof/amd/acp.c:213:6: note: If condition 'ret' is true, the
function will return/exit
if (ret)
^
sound/soc/sof/amd/acp.c:222:9: note: Returning identical expression 'ret'
return ret;
^
Just return 0; on success.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Link: https://lore.kernel.org/r/20211221165802.236843-1-AjitKumar.Pandey@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Guennadi spotted inconsistencies with our 'const' handling, Ajit Kumar
flagged a missing check for a null pointer and we missed the
definition of debug zones.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
None of the SOF platforms support INFO_RESUME, and rely on the
indirect path used by the ALSA core with the prepare and TRIGGER_START
steps.
Let's remove the left-over dead code.
SND_SOC_SOF_DEVELOPER_SUPPORT contains options affecting how the built
SOF driver stack will behave, enables debug options and other features.
These options have no meaning if the SND_SOC_SOF is not even enabled.
If we have SOF client options under developer_support and debug they can
be selected to be built even without the core, but they do need symbols
from the core (the sof-client API) which can result build failure.
In Kconfig we can have
SND_SOC_SOF_TOPLEVEL=y
SND_SOC_SOF_DEBUG_IPC_FLOOD_TEST=y
for example, which will make the flood client to be built, but the SOF core
is not as SND_SOC_SOF is not selected.
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211216230350.343857-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When pcm stream is stopped "substream->runtime" pointer will be set
to NULL by ALSA core. In case host received an ipc msg from firmware
of type IPC_STREAM_POSITION after pcm stream is stopped, there will
be kernel NULL pointer exception in ipc_period_elapsed(). This patch
fixes it by adding NULL pointer check for "substream->runtime".
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211216232422.345164-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SOF driver removed the support for INFO_RESUME in the commit
"ASoC: SOF: pcm: do not add SNDRV_PCM_INFO_RESUME to runtime hw info".
And resuming is handled by the ALSA core with the .prepare and
.trigger_start stages. So, remove handling of RESUME trigger in the
component driver trigger op. So, remove handling the RESUME trigger in
the platform trigger op for HDA platforms.
Reviewed-by: Kai Vehmanen <kai.vehmanen@intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211216231628.344687-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SOF driver removed the support for INFO_RESUME in the commit
"ASoC: SOF: pcm: do not add SNDRV_PCM_INFO_RESUME to runtime hw info".
And resuming is handled by the ALSA core with the .prepare and
.trigger_start stages. So, remove handling of RESUME trigger in the
HDA DAI BE trigger op.
Reviewed-by: Kai Vehmanen <kai.vehmanen@intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211216231628.344687-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SOF driver removed the support for INFO_RESUME in the commit
"ASoC: SOF: pcm: do not add SNDRV_PCM_INFO_RESUME to runtime hw info".
And resuming is handled by the ALSA core with the .prepare and
.trigger_start stages. So, remove handling of RESUME trigger in the
component driver trigger op.
Reviewed-by: Kai Vehmanen <kai.vehmanen@intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211216231628.344687-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Read back the control data from the DSP to initialize the control data
size to match that of the data in the DSP. This is particularly useful
for volatile read-only kcontrols in static pipelines.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20211215180404.53254-9-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SOF_CTRL_TYPE_VALUE_COMP_* type is not used by the firmware nor in the
kernel side.
It is also not clear what action should be taken for such type.
With this in mind:
The correct ipc_cmd can be selected based on the `ctrl_cmd` and the `set`
parameters:
if the ctrl_cmd is SOF_CTRL_CMD_BINARY then SOF_CTRL_TYPE_DATA_*
otherwise SOF_CTRL_TYPE_VALUE_CHAN_*.
The SET or GET direction can be selected with the use of `set` parameter.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211215180404.53254-8-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The component type is not used in firmware nor in the kernel currently and
it is not even clear how it should be handled.
Do not even try to handle it to avoid errors.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211215180404.53254-7-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no need to use two variables to store and check the same
information, the scontrol->cmd is the same as scontrol->control_data->cmd.
Drop the former one and when it is needed, access the cmd from the
control_data.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211215180404.53254-6-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The scontrol->control_data->cmd has been configured during initialization
to the correct sof_ipc_ctrl_cmd.
No need to pass duplicated information, let's use the already available
one via scontrol.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211215180404.53254-5-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Set the scontrol->control_data->cmd early to the same as scontrol->cmd.
This is a preparatory patch to remove the ctrl_cmd parameter for the
snd_sof_ipc_set_get_comp_data() function.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211215180404.53254-4-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The correct ipc_cmd can be selected based on the `ctrl_cmd` and the `set`
parameters:
if the ctrl_cmd is SOF_CTRL_CMD_BINARY then SOF_IPC_COMP_*_DATA
otherwise SOF_IPC_COMP_*_VALUE.
The SET or GET direction can be selected with the use of `set` parameter.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211215180404.53254-3-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename the send parameter to set in snd_sof_ipc_set_get_comp_data() and
sof_set_get_large_ctrl_data() to be more aligned with the function name.
No functional change.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211215180404.53254-2-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Similar with commit 8a49cd11e6 ("ASoC: SOF: ACPI: avoid reverse
module dependency") we will be having hardware specific drivers that
link against a common "helper" framework.
sof-of-dev.c becomes a library with the interface defined in the newly
created file sof-of-dev.h.
This is the final step started with Kconfig simplification in
commit 7548a391c5 ("ASoC: SOF: i.MX: simplify Kconfig")
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211215085703.137414-1-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The only usage of sof_probe_compr_ops is to assign its address to the
cops field in the snd_soc_dai_driver struct (in
sound/soc/sof/intel/hda-dai.c). Make it const to allow the compiler to
put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20211204203220.54712-1-rikard.falkeborn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In SOF OF device, pm_runtime_put_autosuspend() is not
matching any pm_runtime_get_sync().
This is imbalanced for PM runtime.
Also, for consistency we call pm_runtime_mark_last_busy()
before enabling PM runtime.
1. Remove pm_runtime_put_autosuspend() in probe_complete
2. Reorder PM runtime calls int probe_complete
Signed-off-by: Allen-KH Cheng <Allen-KH.Cheng@mediatek.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20211209200830.145005-1-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Explain why JasperLake is exposed in cnl.c instead of icl.c
No functionality change.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211207193947.71080-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code does not use the 'host_dma_id', 'link_dma_id',
'host_bps' fields remove them.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211207193947.71080-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The code inherited from the Skylake driver does not seem to follow any
known hardware recommendations.
The only two recommended options are
a) use DPIB registers if VC1 traffic is not allowed
b) use DPIB DDR update if VC1 traffic is used
In all of SOF-based updated, VC1 is not supported so we can 'safely'
move to using DPIB registers only.
This patch keeps the legacy code, in case there was an undocumented
issue lost to history, and adds the DPIB DDR update for additional
debug.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20211207193947.71080-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code is inconsistent, we should only enable DPIB if the
'use_posbuf' field is true.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20211207193947.71080-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
we use 'bus->use_posbuf && bus->posbuf.addr' in
hda_dsp_ctrl_init_chip(), use the same for hda_dsp_ctrl_stop_chip()
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20211207193947.71080-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The work-around enabled in hda-stream.c is only required on earlier
versions of SOCs/PCH (Skylake, KabyLake, ApolloLake,
GeminiLake). Before setting the format on the host DMA, it is required
to couple the host and link DMA - which as a consequence shall use the
same format.
This patch introduces a quirk field in the platform descriptor and
makes the work-around conditional. Newer platforms have
no limitations on the use of host and link DMA, which can use
different formats.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20211207193947.71080-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the ICL specific ops to icl.c. Also introduce a
macro ICL_DSP_HPRO_CORE_ID to define the core that
should be powered up when HPRO is enabled.
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211207193947.71080-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On the latest Lenovo Thinkstation laptops, we often experience the
speaker failure after rebooting, check the dmesg, we could see:
sof-audio-pci-intel-tgl 0000:00:1f.3: codec #0 probe error, ret: -5
The analogue codec on the machine is ALC287, then we designed a
testcase to reboot and check the codec probing result repeatedly, we
found the analogue codec probing always failed at least once within
several minutes to several hours (roughly 1 reboot per min). This
issue happens on all laptops of this Thinkstation model, but with
legacy HDA driver, we couldn't reproduce this issue on those laptops.
And so far, this issue is not reproduced on machines which don't
belong to this model.
We tried to make the hda_dsp_ctrl_init_chip() same as
hda_intel_init_chip() which is the controller init routine in the
legacy HDA driver, but it didn't help.
We found when issue happens, the resp is -1, and if we let driver
re-run send_cmd() and get_response(), it will get the correct response
10ec0287, then driver continues the rest work, finally boot to the
desktop and all audio function work well.
Here adding codec probing retries to 3 times, it could fix the issue
on this Thinkstation model, and it doesn't bring impact to other
machines.
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211130090606.529348-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Kai Vehmanen <kai.vehmanen@linux.intel.com>:
Implement an updated programming sequence to handle DMA stop for Intel
HD-Audio DMA.
The new flow is only used if the firmware is sufficiently new to
support the feature. SOF1.9.2 is the first release with the updated
flow. The kernel changes are backwards compatible with old firmware
releases. Likewise new firmware releases will work with old kernel.
Series reviewed originally at:
https://github.com/thesofproject/linux/pull/3167
On 32-bit with CONFIG_ARCH_DMA_ADDR_T_64BIT=n:
sound/soc/sof/mediatek/mt8195/mt8195.c: In function ‘platform_parse_resource’:
sound/soc/sof/mediatek/mt8195/mt8195.c:51:15: error: format ‘%llx’ expects argument of type ‘long long unsigned int’, but argument 4 has type ‘unsigned int’ [-Werror=format=]
51 | dev_dbg(dev, "DMA pbase=0x%llx, size=0x%llx\n",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/soc/sof/mediatek/mt8195/mt8195.c: In function ‘adsp_memory_remap_init’:
sound/soc/sof/mediatek/mt8195/mt8195.c:167:15: error: format ‘%llx’ expects argument of type ‘long long unsigned int’, but argument 4 has type ‘phys_addr_t’ {aka ‘unsigned int’} [-Werror=format=]
167 | dev_dbg(dev, "adsp->pa_dram %llx, offset %#x\n", adsp->pa_dram, offset);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/soc/sof/mediatek/mt8195/mt8195.c: In function ‘adsp_shared_base_ioremap’:
sound/soc/sof/mediatek/mt8195/mt8195.c:196:15: error: format ‘%llx’ expects argument of type ‘long long unsigned int’, but argument 5 has type ‘phys_addr_t’ {aka ‘unsigned int’} [-Werror=format=]
196 | dev_dbg(dev, "shared-dram vbase=%p, phy addr :%llx, size=%#x\n",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix the first cases by printing the full resource using %pR.
Fix the other cases by printing the physical addresses using %pa.
Reported-by: noreply@ellerman.id.au
Fixes: 32d7e03d26 ("ASoC: SOF: mediatek: Add mt8195 hardware support")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20211123103013.73645-1-geert@linux-m68k.org
Signed-off-by: Mark Brown <broonie@kernel.org>
For HDA DAI's the DMA must be paused after the RUN bit is cleared by the
host. So, send the DAI_CONFIG IPC with just the SOF_DAI_CONFIG_FLAGS_PAUSE
flag set to indicate this to the firmware.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211125101520.291581-11-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some DAI components, such as HDaudio, need to be stopped in two steps
a) stop the DAI component
b) stop the DAI DMA
This patch enables this two-step stop by expanding the DAI_CONFIG
IPC flags and split them into 2 parts.
The 4 LSB bits indicate when the DAI_CONFIG IPC is sent, ex: hw_params,
hw_free or pause. The 4 MSB bits are used as the quirk flags to be used
along with the command flags. The quirk flag called
SOF_DAI_CONFIG_FLAGS_2_STEP_STOP shall be set along with the HW_PARAMS
command flag, i.e. before the pipeline is started so that the stop/pause
trigger op in the FW can take the appropriate action to either
perform/skip the DMA stop. If set, the DMA stop will be executed when
the DAI_CONFIG IPC is sent during hw_free. In the case of pause, DMA
pause will be handled when the DAI_CONFIG IPC is sent with the PAUSE
command flag.
Along with this, modify the signature for the hda_ctrl_dai_widget_setup/
hda_ctrl_dai_widget_free() functions to take additional flags as an
argument and modify all users to pass the appropriate quirk flags. Only
the HDA DAI's need to pass the SOF_DAI_CONFIG_FLAGS_2_STEP_STOP quirk
flag during hw_params to indicate that it supports two-step stop and
pause.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211125101520.291581-10-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Even though the order of stopping the DMA and freeing the widget list is
not important, align the sequence to match with the stop trigger to
avoid confusion.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211125101520.291581-9-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the check for the prepared flag inside snd_pcm_dsp_pcm_free() to
avoid having to check it before every invocation of the function.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211125101520.291581-8-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a helper function to free PCM in the FW, stop the DMA and free the
widget list. These actions are performed both during PCM trigger STOP
and when a paused stream is freed during system suspend.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211125101520.291581-7-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Paused streams must be stopped and platform hw_free should be invoked
during system suspend so they can be restarted properly after system
resume.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211125101520.291581-6-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_sof_pcm_platform_hw_params() will be called when the stream is
restarted with a prepare ioctl. This happens in two cases i.e. when a
suspended stream is resumed or when a stream is restarted without
intermediate call to sof_pcm_hw_free(). Make sure to call
snd_sof_pcm_platform_hw_free() in both these cases to keep it balanced.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211125101520.291581-5-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The recommended programming sequence for HD-Audio DMA is to reset the
stream before coupling the link and host DMA's.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211125101520.291581-4-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a helper function to perform stream reset.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211125101520.291581-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The DAI_CONFIG IPC that is sent during the STOP trigger is used for
stopping the DMA in the FW. This must be done after the DMA RUN bit is
cleared by the host. So move the call to snd_hdac_ext_link_stream_clear()
before hda_link_dai_widget_update() to follow the correct programming
sequence for DMA stop for HDA DAIs.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211125101520.291581-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The node pointer is returned by of_parse_phandle() with
refcount incremented in platform_parse_resource(). Calling
of_node_put() to aovid the refcount leak.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20211125071608.3056715-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
The use of the SPIB register helps reduce power consumption - though
to a smaller degree than DMI_L1. This hardware capability is however
incompatible with userspace-initiated rewinds typically used by
PulseAudio.
In the past (2015..2017) Intel suggested an API extension to let
applications disable rewinds. At the time the feedback was that such a
capability was too Intel-specific and SPIB remained unused except for
loading DSP code. We now see devices with smaller batteries being
released, and it's time to revisit Linux support for SPIB to extend
battery life.
In this update the rewinds are disabled via an opt-in kernel
parameter. In the previous reviews, there was consensus that a Kconfig
option was too complicated for distributions to set, and we are
missing a TBD API to expose such capabilities to user-space.
The debate on whether or not to use rewinds, and the impact of
disabling rewinds, will likely be closed when Intel releases the
'deep-buffer' support, currently under development [2][3]. With this
solution, rewinds will not be needed, ever. When an application deals
with content that is not latency-sensitive (e.g. music playback), it
will be able to reduce power consumption by selecting a different PCM
device with increased buffering capabilities. Low-latency streams
will be handled by the 'regular' path. In other words, the impossible
compromise between power and latency will be handled with different
PCM devices/profiles for the same endpoint, and we can push the design
of capability negotiation to a later time when all the building blocks
(firmware topology, kernel, userspace) are ready - we still have
firmware xruns, DPCM race conditions to solve, and a need to describe
these alternate PCM devices with UCM using 'modifiers'.
During system suspend, paused streams do not get suspended.
Therefore, we need to explicitly free these PCMs in the DSP
and free the associated DAPM widgets so that they can be set
up again during resume.
Fixes: 5fcdbb2d45 ("ASoC: SOF: Add support for dynamic pipelines")
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211123171606.129350-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It's not clear why we would walk the list backwards. That makes no
difference.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211123171606.129350-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Older firmware prior to ABI 3.19 has a dependency where the scheduler
widgets need to be setup last. Moving the call to sof_widget_setup()
before the pipeline_complete() call also helps remove the need for the
'reverse' direction when walking through the widget list - this was
only working because of the topology macros but the topology does not
require any order.
Fixes: 5fcdbb2d45 ("ASoC: SOF: Add support for dynamic pipelines")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211123171606.129350-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When we disable rewinds, then the .ack can be used to program SPIB
with the application pointer, which allows the HDaudio DMA to save
power by opportunistically bursting data transfers when the path to
memory is enabled (and conversely to shut it down when there are no
transfer requests).
The SPIB register can only be programmed with incremental values with
wrap-around after the DMA RUN bits are set. For simplicity, we set the
INFO_NO_REWINDS flag in the .open callback when we already need to
program the SNDRV_PCM_INFO_SYNC_APPLPTR flag.
Rewinds are not used by many applications. One notable application
using rewinds is PulseAudio. Practical experiments with
Ubuntu/PulseAudio default settings did not show any audible issues,
but the user may hear volume changes and notification with a delay,
depending on the size of the ring buffer and latency constraints.
The choice of disabling rewinds is exposed as a kernel parameter and
not a Kconfig option to avoid any undesirable side-effects.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Co-developed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211119230852.206310-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the indirections required at the core level for platform-specific
operations on ack.
Note that on errors in the .ack the ALSA core will restore the
previous appl_ptr.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211119230852.206310-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is not unusual for ALSA/ASoC hw_params callbacks to be invoked
multiple times. Reset and free the DAI widget before reconfiguring
it to keep the DAI widget use_count balanced.
Fixes: 0acb48dd31 ("ASoC: SOF: Intel: hda: make sure DAI widget is set up before IPC")
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211123165759.127884-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Kai Vehmanen <kai.vehmanen@linux.intel.com>:
When a pipeline is marked dynamic in the SOF DSP firmware
topology definition (the tplg file kernel loads from filesystem),
it means the pipeline resources are not allocated when DSP is
booted (at driver probe, or at runtime resume), but rather delayed
until the pipeline is actually used.
There are already 3 versions of the Up boards with support for the SOF
community key (ApolloLake, WhiskyLake, TigerLake). Rather than
continue to add quirks for each version, let's add a wildcard.
For WHL and TGL, the authentication supports both the SOF community
key and the firmware signed with the Intel production key. Given two
choices, the community key is the preferred option to allow developers
to sign their own firmware. The firmware signed with production key
can still be selected if needed with a kernel module
option (snd-sof-pci.fw_path="intel/sof")
Tested-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20211119231327.211946-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To keep the widget use_counts balanced, free the DAI widget
during suspend and also during the stop trigger.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211119192621.4096077-11-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support for dynamic pipelines with multi-core
by using the platform-specific core_get/put() ops to
power up/down a core when a widget is set up/freed.
Along with this, a few redundant functions are removed:
1. sof_pipeline_core_enable() is no longer needed as the
pipeline core will be set up when the pipeline widget
is set up
2. sof_core_enable() is replaced with snd_sof_core_get()
4. core_power_up/down() DSP ops are deprecated and replaced with
core get/put ops.
5. Core power down in sof_widget_unload() during topology
removal is also removed as it is not really needed. For dynamic
pipelines, the cores will be powered off when they are not used.
For static pipelines, the cores will be powered off in the device
remove callback.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211119192621.4096077-10-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The core_power_up/down() ops will be deprecated. Use the
HDA platform-specific functions for powering up/down
the cores during probe/suspend/remove. The enabled_cores_mask
and the core ref_count's are manually updated in each of
these functions.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211119192621.4096077-9-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Free widgets for static pipelines in sof_tear_down_pipelines().
But this feature is unavailable in older firmware with ABI < 3.19.
Just reset widget use_count's for this case. This would ensure that
the secondary cores enabled required for topology setup are powered
down properly before the primary core is powered off during
system suspend.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211119192621.4096077-8-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove the function sof_load_pipeline_ipc() and directly
send the IPC instead. The pipeline core is already enabled
with the call to sof_pipeline_core_enable() in sof_widget_setup().
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211119192621.4096077-7-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Set core_get/put ops for CNL/ICL platforms. These platforms
do not support enabling/disabling secondary cores
dynamically. So skip sending the IPC to power off the
cores in the core_put op.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211119192621.4096077-6-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Set core_get/put() ops for TGL. When core_get()
is requested for a core, its ref_count is incremented
and the PM_CORE_ENABLE IPC sent to the firmware to
power up the core if the current ref_count is 1.
Conversely, the ref_count is decremented in core_put()
and an IPC is sent to the DSP to power off the core
if the ref_count is 0.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211119192621.4096077-5-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add ops to get/put a core that will be used to power
up/down a core along with incrementing/decrementing
its ref_count.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211119192621.4096077-4-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add two fields num_cores and dsp_cores_ref_count to
struct snd_sof_dev. These will be used to maintain the
ref count for each core to determine when it should be
powered up or down.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211119192621.4096077-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Resume common flow (System PM / Runtime PM) is like this:
sof_resume
-> specific device resume
-> snd_sof_load_firmware
-> snd_sof_dsp_reset (1)
-> load_modules()
-> snd_sof_run_firmware (2)
We need to implement dsp_reset callback (1) that will actually reset
the DSP but keep it stalled.
In order to implement this we do the following:
-> put DSP into reset (assert CoreReset bit from PWRCTL)
-> stall the DSP using RunStall bit from AudioDSP_REG2 mix
-> take DSP out of reset (de-assert CoreReset bit from PWRCTL)
At this moment the DSP is taken out of reset and Stalled! This means
that we can load the firmware and then start the DSP (2).
Until now we resetted the DSP by turning down the Audiomix PD. This
doesn't work for Runtime PM if another IP is keeping Audiomix PD up.
By introducing dsp_reset() we no longer rely on turning off the
audiomix to reset the DSP.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211119094319.81674-6-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On i.MX8M DSP is controlled via a set of registers
from Audio MIX. This patches gets a reference (via regmap)
to Audio Mix registers and implements DSP start.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211119094319.81674-5-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We make use of common imx8m_suspend / imx8m_resume functions
for both system PM and runtime PM.
imx8m_suspend:
- frees the MU channels
- disables the clocks
imx8m_resume
- enables the clocks
- requests the MU channels
On i.MX8MP there is no dedicated functionality to put the DSP in reset.
The only way of doing this is to POWER DOWN the Audiomix domain.
We are able to do this because turning off the clocks and freeing the
channels makes the Audiomix to have no users thus PM kernel core turns
it down.
SOF core will not call system PM suspend handler if the DSP is already
down, but at resume it will call the system PM resume. So, we need to
keep track of the state via snd_sof_dsp_set_power_state
Few insights on how SOF core handles the PM:
- SOF core uses PM runtime autosuspend (with a timeout of 2 secs)
- at probe, SOF core boots the DSP and lets the PM runtime suspend to
turn it off, if there is no activity
- when someone opens the ALSA sound card (aplay/arecord, etc) ALSA core
calls PM runtime resume to turn on the DSP
- when the ALSA sound card is closed SOF core make use of PM subsystem
to call PM runtime suspend and thus turning off the DSP.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211119094319.81674-4-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Handle clocks and mailbox channels at runtime suspend/resume
in order to save power.
DSP runtime PM uses a timeout of 2s. If device
is idle for 2s system will enter runtime suspend.
Because SOF state machine assumes that even if the DSP wasn't previously
active at a System resume, will re-load the firmware we need to make sure
that all needed resources are active.
Kernel core will take care of enabling the PD, we need to make sure that
we request the MU channels.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211119094319.81674-3-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We need at least 3 clocks in order to power up and access
DSP core registers found on i.MX8QM, i.MX8QXP and i.MX8MP
platforms.
Add code to request these clocks and enable them at probe. Next
patches will add PM support which will only activate clocks when
DSP is used.
DSP clocks are already documented in
Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
We choose to add:
* imx8_parse_clocks
* imx8_enable_clocks
* imx8_disable_clocks
wrappers because in the future DSP will need to take care about the
clocks of other related Audio IPs (e.g SAI, ESAI).
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211119094319.81674-2-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add DSP system PM callback for suspend and resume
Signed-off-by: YC Hung <yc.hung@mediatek.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20211118100749.54628-9-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add adsp clock on/off support on mt8195 platform.
Signed-off-by: YC Hung <yc.hung@mediatek.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20211118100749.54628-8-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add mt8195-loader module with ops callback to load and run firmware
on mt8195 platform.
Signed-off-by: YC Hung <yc.hung@mediatek.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20211118100749.54628-5-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add new sof dai and config to pass topology file configuration
to SOF firmware running on Mediatek platform DSP core.
Add mediatek audio front end(AFE) to the list of supported sof_dais
Signed-off-by: YC Hung <yc.hung@mediatek.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20211118100749.54628-4-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch initialize to support SOF on Mediatek mt8195 platform.
MT8195 has four Cortex A78 cores paired with four Cortex A55 cores.
It also has Cadence HiFi-4 DSP single core. There are shared DRAM and
mailbox interrupt between AP and DSP to use for IPC communication.
Signed-off-by: YC Hung <yc.hung@mediatek.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20211118100749.54628-2-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add callback to notify PSP after loading firmware on DSP. PSP will
validate the loaded firmware and set qualifier bit to run firmware
on secured AMD systems.
Signed-off-by: Julian Schroeder <Julian.Schroeder@amd.com>
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Curtis Malainey <curtis@malainey.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20211117093734.17407-14-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add trace support and configure trace stream for ACP firmware.
Signed-off-by: Vishnuvardhanrao Ravuapati <vishnuvardhanrao.ravulapati@amd.com>
Signed-off-by: V sujith kumar Reddy <vsreddy@amd.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20211117093734.17407-13-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add new sof dais and config to pass topology file configuration
to SOF firmware running on ACP's DSP core. ACP firmware support
I2S_BT, I2S_SP and DMIC controller hence add three new dais to
the list of supported sof_dais
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20211117093734.17407-12-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add PCI driver module to enable sof pci device support for Renoir.
If machine flag set to FLAG_SOF_ONLY_DMIC this pci driver register
platform device for non dsp based I2S platform device. If machine
flag is not enabled for SOF pci probe will return without invoking
sof device probe and registration
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20211117093734.17407-10-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add module to support ALSA pcm stream configurations for ACP I2S
and DMIC endpoints
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20211117093734.17407-7-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add dsp ops callback to register I2S and DMIC sof dai's with ALSA
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20211117093734.17407-6-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add IPC module for generic ACP block and exposed ops callback for
to synchronize SOF IPC message between host and DSP
Signed-off-by: Balakishore Pati <Balakishore.pati@amd.com>
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20211117093734.17407-5-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add acp-loader module with ops callback to load and run firmware
on ACP DSP block on Renoir platform.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20211117093734.17407-4-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ACP DMA is used for loading SOF firmware into DSP memory and data
transfer from system memory to DSP memory. Add helper callbacks to
initialize and configure ACP DMA block for fw loading.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20211117093734.17407-3-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch initializes ACP HW block to support SOF on
AMD Renoir platform.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20211117093734.17407-2-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In order to stress test the firmware's ability to handle (mis)crafted
IPC messages this patch adds a debugfs interface where a binary file
(message) can be written and the message is sent to the firmware as it is.
Read on the same file will return the reply from the firmware if it is
available as a binary.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20211116152137.52129-5-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make use of the generic snd_sof_ipc_process_reply() from the core instead
the local implementation.
snd_sof_ipc_process_reply() handles the reply retrieving and the ipc reply
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20211116152137.52129-4-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make use of the generic snd_sof_ipc_process_reply() from the core instead
the local implementation.
snd_sof_ipc_process_reply() handles the reply retrieving and the ipc reply
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20211116152137.52129-3-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The code to get the reply for a tx is identical in all but one place:
imx8_get_reply(), imx8m_get_reply(), atom_get_reply(), bdw_get_reply().
hda_dsp_ipc_get_reply() have additional check in place for PROBES and
special handling of PM messages.
Add a generic implementation to the core which can be used as drop in
replacement.
The reply size check is changed to be able to handle cases when the reply
size is not know beforehand (this is the case for PROBES and
DEBUG_MEM_USAGE for example).
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20211116152137.52129-2-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Follow the Intel example and simplify the Kconfig
a) start from the end-product for 'select' chains
b) use 'depends on' to filter out configurations.
c) use snd-sof-of as a common module without any 'select'
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20211116124131.46414-1-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To ensure clean unload of the machine driver, components and topology, do
the unregister before we free IPC and debugfs.
It is a possibility that part of the unregister we would have IPC
communication with the firmware.
Suggested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211102094756.9317-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Send the DMA_TRACE_FREE IPC during release to stop and free the trace
DMA in the DSP.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20211102101019.14037-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Parse all the trace DMA IPC commands in ipc_log_header().
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20211102101019.14037-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With CONFIG_SND_SOC_SOF_COMPRESS=m, the compression code is
not built into a the main SOF driver when that is built-in:
x86_64-linux-ld: sound/soc/sof/ipc.o: in function `ipc_stream_message':
ipc.c:(.text+0x5a2): undefined reference to `snd_sof_compr_fragment_elapsed'
x86_64-linux-ld: sound/soc/sof/topology.o: in function `sof_dai_load':
topology.c:(.text+0x32d1): undefined reference to `snd_sof_compr_init_elapsed_work'
x86_64-linux-ld: topology.c:(.text+0x32e1): undefined reference to `snd_sof_compr_init_elapsed_work'
Make this a 'bool' symbol so it just decides whether the
code gets built at all.
Fixes: 858f7a5c45 ("ASoC: SOF: Introduce fragment elapsed notification API")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211108111132.3800548-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
If codec is in runtime suspend, but controller is not, hotplug events
are missed as the codec has no way to alert the controller. Problem does
not occur if both controller and codec are active, or when both are
suspended.
An easy way to reproduce is to play an audio stream on one codec (e.g.
to HDMI/DP display codec), wait for other HDA codec to go to runtime
suspend, and then plug in a headset to the suspended codec. The jack
event is not reported correctly in this case. Another way to reproduce
is to force controller to stay active with
"snd_sof_pci.sof_pci_debug=0x1"
Fix the issue by reconfiguring the WAKEEN register when powering up/down
individual links, and handling control events in the interrupt handler.
Fixes: 87fc20e4a0 ("ASoC: SOF: Intel: hda: use hdac_ext fine-grained link management")
Reported-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20211105111655.668777-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The second parameter for snd_sof_ipc_set_get_comp_data() is ipc_cmd, not
ipc_ctrl_type and the type is u32.
Fixes: 756bbe4205 ("ASoC: SOF: Handle control change notification from firmware")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Acked-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211103082710.17165-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is an unusually large set of updates, mostly a large crop of
unusually big drivers coupled with extensive overhauls of existing code.
There's a SH change here for the DAI format terminology, the change is
straightforward and the SH maintainers don't seem very active.
- A new version of the audio graph card which supports a wider range of
systems.
- Move of the Cirrus DSP framework into drivers/firmware to allow for
future use by non-audio DSPs.
- Several conversions to YAML DT bindings.
- Continuing cleanups to the SOF and Intel code.
- A very big overhaul of the cs42l42 driver, correcting many problems.
- Support for AMD Vangogh and Yelow Cap, Cirrus CS35L41, Maxim
MAX98520 and MAX98360A, Mediatek MT8195, Nuvoton NAU8821, nVidia
Tegra210, NXP i.MX8ULP, Qualcomm AudioReach, Realtek ALC5682I-VS,
RT5682S, and RT9120 and Rockchip RV1126 and RK3568
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmF/+i8ACgkQJNaLcl1U
h9AWiAf+OoukOIBspXW3hoa7gfAhiP1bEpaforZaz0grYDT8IGBwO01JTe3qlHM2
KLSi1k97Y33aVPjIox6ynJ9EJ+OwGfHujqFCeI1jm+QRnOCAqQx8oHaKCMzbvUpk
rFhok4xR5XMR6NZUGQVtp5cv903r32mb0Prxvp6CXeGc6HZxcjAMYsGRBPcQoprN
FCkiTf1qxrNQl2UmRsf8rDQmHiHpnGjiUpIUrtY9wvZGE3EQzfhQ3r1TAw7AVMmC
YDQxjU/KftW2zTgXx+mGtu1iX0OMUBo/W8oR9RjIUUIkyA6CllScBOvQIgp9EU18
PZPIEsyuC9zwcxHb7bPXx5E9vRsY7A==
=/NwC
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.16' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.16
This is an unusually large set of updates, mostly a large crop of
unusually big drivers coupled with extensive overhauls of existing code.
There's a SH change here for the DAI format terminology, the change is
straightforward and the SH maintainers don't seem very active.
- A new version of the audio graph card which supports a wider range of
systems.
- Move of the Cirrus DSP framework into drivers/firmware to allow for
future use by non-audio DSPs.
- Several conversions to YAML DT bindings.
- Continuing cleanups to the SOF and Intel code.
- A very big overhaul of the cs42l42 driver, correcting many problems.
- Support for AMD Vangogh and Yelow Cap, Cirrus CS35L41, Maxim
MAX98520 and MAX98360A, Mediatek MT8195, Nuvoton NAU8821, nVidia
Tegra210, NXP i.MX8ULP, Qualcomm AudioReach, Realtek ALC5682I-VS,
RT5682S, and RT9120 and Rockchip RV1126 and RK3568
A back-merge of 5.15 branch into 5.16-devel branch for further
development of USB and ALSA core stuff that depends on 5.15 fixes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The fixed maximum size of IPC message does not allow for large
transfers, e.g. for filter data. Currently such messages will
be divided into smaller pieces and sent to firmware in multiple
chunks. For future IPC, this strategy is not suitable.
The maximum IPC message size is limited by host box size which
can be known when firmware is ready, so the fw_ready callback
can allocate IPC messages with platform-specific sizes instead
of the current fixed-size.
To be compatible with released firmware, current platforms will
still use SOF_IPC_MSG_MAX_SIZE. For future platforms, there will
be a new fw_ready function and the platform-specific allocation
will take place there.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Message-Id: <20211008093836.28210-1-peter.ujfalusi@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Hi,
The aim of this series is to clean up, make it easier to interpret and less
'chatty' prints aimed for debugging errors.
For example currently the DSP/IPC dump is printed every time we have an IPC
timeout and it is posible to lost the first and more indicative dump to find the
rootcause.
Regards,
Peter
---
Peter Ujfalusi (18):
ASoC: SOF: debug: Swap the dsp_dump and ipc_dump sequence for
fw_exception
ASoC: SOF: ipc and dsp dump: Add markers for better visibility
ASoC: SOF: Print the dbg_dump and ipc_dump once to reduce kernel log
noise
ASoC: SOF: loader: Print the DSP dump if boot fails
ASoC: SOF: intel: atom: No need to do a DSP dump in atom_run()
ASoC: SOF: debug/ops: Move the IPC and DSP dump functions out from the
header
ASoC: SOF: debug: Add SOF_DBG_DUMP_OPTIONAL flag for DSP dumping
ASoC: SOF: intel: hda-loader: Use snd_sof_dsp_dbg_dump() for DSP dump
ASoC: SOF: Drop SOF_DBG_DUMP_FORCE_ERR_LEVEL and sof_dev_dbg_or_err
ASoC: SOF: debug: Print out the fw_state along with the DSP dump
ASoC: SOF: ipc: Re-enable dumps after successful IPC tx
ASoC: SOF: ops: Force DSP panic dumps to be printed
ASoC: SOF: Introduce macro to set the firmware state
ASoC: SOF: intel: hda: Drop 'error' prefix from error dump functions
ASoC: SOF: core: Clean up snd_sof_get_status() prints
ASoC: SOF: loader: Drop SOF_DBG_DUMP_REGS flag when firmware start
fails
ASoC: SOF: Intel: hda-loader: Drop SOF_DBG_DUMP_REGS flag from
dbg_dump calls
ASoC: SOF: Intel: hda: Dump registers and stack when SOF_DBG_DUMP_REGS
is set
Pierre-Louis Bossart (1):
ASoC: SOF: core: debug: force all processing on primary core
sound/soc/sof/core.c | 24 ++++++-------
sound/soc/sof/debug.c | 61 ++++++++++++++++++++++++++++++--
sound/soc/sof/intel/atom.c | 5 +--
sound/soc/sof/intel/hda-loader.c | 11 +++---
sound/soc/sof/intel/hda.c | 16 +++------
sound/soc/sof/ipc.c | 10 ++++--
sound/soc/sof/loader.c | 11 ++++--
sound/soc/sof/ops.c | 3 ++
sound/soc/sof/ops.h | 12 +------
sound/soc/sof/pm.c | 6 ++--
sound/soc/sof/sof-priv.h | 31 ++++++++++------
sound/soc/sof/topology.c | 6 ++++
12 files changed, 131 insertions(+), 65 deletions(-)
--
2.33.0
This patch prepares the introduction of the compress API with SOF.
After each fragment is accepted by the DSP we need to inform
the userspace applications that they can send the next fragment.
This is done via snd_compr_fragment_elapsed.
Similar with the PCM case, in order to avoid sending an IPC before
the previous IPC is handled we need to schedule a delayed work to
call snd_compr_fragment_elapsed().
See snd_sof_pcm_period_elapsed.
To sum up this patch offers the following API to SOF code:
* snd_sof_compr_init_elapsed_work
* snd_sof_compr_fragment_elapsed
Note that implementation for compressed function is in a new file
selected via CONFIG_SND_SOC_SOF_COMPRESS invisible config option.
This option is automatically selected for platforms that support
the compress interface. For now only i.MX8 platforms support this.
For symmetry we introduce snd_sof_pcm_init_elapsed_work to setup
the work struct for PCM case.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Bud Liviu-Alexandru <budliviu@gmail.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20211004152147.1268978-5-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This makes IMX use the newly introduced generic IPC ops
instead of imx specific ones, and removes the old IMX
ipc ops, as they are no longer needed.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Bud Liviu-Alexandru <budliviu@gmail.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20211004152147.1268978-4-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This operations should be generic as there is nothing Intel
specific. This works well for NXP i.MX8 stream IPC ops.
We start by moving sof/intel/intel-ipc.c into sof/stream-ipc.c and
rename the functions to be generic.
Notice that we use newly introduced snd_sof_dsp_mailbox_read
instead of sof_mailbox_read, to make sure that we are not
bound to existing MMIO memory access, and we allow platform
to implement their own memory access routines.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Bud Liviu-Alexandru <budliviu@gmail.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20211004152147.1268978-3-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We need to introduce snd_sof_mailbox_{read/write} in order to provide
a generic way for mailbox access. These routines are optional, each
platform can implement their own specific routines.
So far, all platforms use mmapped I/O thus they can use custom made
routines sof_mailbox_read / sof_mailbox_write that use MMIO.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Bud Liviu-Alexandru <budliviu@gmail.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20211004152147.1268978-2-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
First thing the pipelines function which have "struct device *dev" as
parameter do is:
struct snd_sof_dev *sdev = dev_get_drvdata(dev);
and in all cases the passed dev is actually coming from sdev->dev.
Skip this steps and pass directly the sdev to all pipelines related
functions as few of them already does this.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211006111651.10027-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When removing the topology components, do not power down
the primary core. Doing so will result in an IPC timeout
when the SOF PCI device runtime suspends.
Fixes: 0dcdf84289 ("ASoC: SOF: add a "core" parameter to widget loading functions")
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20211006104041.27183-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of checking the fw_state to decide what information should be
printed, use the SOF_DBG_DUMP_REGS bit in the flags to dump registers and
stack.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211006110645.26679-20-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In cl_dsp_init() we are powering up the DSP, register dump is not valid.
In hda_dsp_cl_boot_firmware() we are downloading the firmware to DSP, again
the register dump is not a valid concept.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211006110645.26679-19-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_sof_dsp_run() failure indicates that the DSP did not even booted up,
thus asking for dumping registers at this point is not valid.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211006110645.26679-18-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the error prints when decoding the status in snd_sof_get_status():
Drop the "error:" prefixes from the prints,
Use %# to print hexadecimal numbers,
Reword some of the messages to be more precise,
For a known error print out the panic code as well,
For unknown error print only the panic code without the magic
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211006110645.26679-17-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Drop the 'error' prefix printed in hda_dsp_dump_ext_rom_status(),
hda_ipc_irq_dump() and hda_ipc_dump() as it gives no value to the
information we print.
The DSP and IPC dump is marked now, which makes the 'error' prefix more
redundant.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211006110645.26679-16-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add sof_set_fw_state() macro to wrap the sdev->fw_state management to allow
actions to be taken when certain state is set or when state is changing.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211006110645.26679-15-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If a DSP panic happens we want to see the dumps.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211006110645.26679-14-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The dumps are silenced after an IPC tx timeout by default.
The IPC timeout can indicate severe error (firmware crash) or in some cases
it is less devastating and the firmware remains operational, the timeout
was due to a scheduling spike or other anomaly.
In any case consequent IPC timeouts will not print dumps but if any IPC do
succeed than we should re-enable the dumps to print dumps the next time
a timeout might happen.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211006110645.26679-13-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The fw state can be an important information along with the DSP dump.
Print it out before the dump.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211006110645.26679-12-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The sof_dev_dbg_or_err() is only used by intel/hda.c when dumping dsp
debug information.
It was used to print the extended rom status in either dev_dbg (during
retries) and finally with dev_err, but other lines were printed with
dev_err regardless.
Since we now only print the dump once, the flag and the macros is no longer
needed.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211006110645.26679-11-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Do not call directly the hda_dsp_dump(), use the generic wrapper instead
to provide consistent output.
Mark the DSP dumps as optional to not spam the kernel log with the
exception of the last dump in case the DSP fails to run.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211006110645.26679-10-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The new SOF_DBG_DUMP_OPTIONAL flag can be used to mark a DSP dump that
should only be printed when the SOF_DBG_PRINT_ALL_DUMPS sof_core_debug
flag is set, otherwise it should be ignored and not printed.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211006110645.26679-9-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To be usable in platform code, move the IPC and DSP dump function to
debug.c and export it in a similar way as the snd_sof_handle_fw_exception()
Make the snd_sof_ipc_dump() static as it is only used in debug.c
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211006110645.26679-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The core already prints a dump if the DSP failed to start in
snd_sof_run_firmware(), there is no need to print it locally as well.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211006110645.26679-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It can be useful to print the DSP dump from the core in case the DSP boot
failed.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211006110645.26679-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Do not print the dump more than once to keep the kernel log cleaner in case
of a firmware failure.
When the DSP is rebooted due to suspend or runtime_suspend reset the flags
to re-enable the dump prints.
Add also a debug flag to print all dumps to get more coverage if needed.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211006110645.26679-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add markers to identify the start and end of the IPC and DSP dumps in the
kernel log.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211006110645.26679-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_sof_dsp_panic() only prints dsp_dump followed by flushing the DMA trace
buffer.
To retain similar 'sequence' first do an ipc_dump then the dsp_dump and
finally flush the trace buffer in case of fw_exception.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211006110645.26679-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The topology file currently provides information on which
pipeline/processing is to be scheduled on which DSP core.
To help diagnose potential issues, this patch provides an override of
the 'core' tokens to use the primary core (typically core0). Of course
this may result in a Core0 activity that exceeds hardware
capabilities, so this should only be used when the total processing
fits on DSP - possibly using firmware mockup processing and stubs.
No new dmesg log was added to avoid adding noise during topology
parsing, but the existing logs will show the primary core being used.
This is strictly for validation/debug, products should NEVER use this
override, the topology is assumed to be the description of the
firmware graph.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20211006110645.26679-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With the chip shortage, some GeminiLake Intel-based designs were
respun and now rely on codecs that need the SSP bit clock turned on in
the hw_params stage, not the trigger stage. This patchset mirrors the
flags added in the SOF DAI_CONFIG IPC, and sets the flags when this
capability is indicated as necessary in the topology files where the
SSP configuration is stored.
We initially considered a more generic solution with an on-demand SSP
clock activation using the common clock framework. This would be a
more elegant solution indeed, but it would have required more
intrusive changes that would conflict with the SOF multi-client
support (in-development), and more backport hassles on product
branches. The on-demand activation of clocks is still a desired
feature that will be enabled at a later point.
Bard Liao (1):
ASoC: SOF: dai-intel: add SOF_DAI_INTEL_SSP_CLKCTRL_MCLK/BCLK_ES bits
Pierre-Louis Bossart (4):
ASoC: SOF: dai: mirror group_id definition added in firmware
ASoC: SOF: dai: include new flags for DAI_CONFIG
ASoC: SOF: Intel: hda: add new flags for DAI_CONFIG
ASoC: SOF: Intel: hda-dai: improve SSP DAI handling for dynamic
pipelines
include/sound/sof/dai-intel.h | 4 ++
include/sound/sof/dai.h | 10 ++++-
sound/soc/sof/intel/hda-dai.c | 82 ++++++++++++++++++++++++++++++++++-
sound/soc/sof/intel/hda.c | 6 +++
sound/soc/sof/sof-audio.c | 4 ++
5 files changed, 103 insertions(+), 3 deletions(-)
--
2.25.1
This allows specifying an alternate path for SOF firmware or
SOF topology.
This is particularly useful for i.MX when running Linux vs Android.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211005071949.1277613-1-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For debug and community support, it's useful to expose a kernel
parameter to prevent the use of dynamic pipelines exposed in a
topology file, or conversely to force an existing topology to use
dynamic pipelines.
Add an override bit and an enable bit which is valid only when the
override is set.
For products, the intent is that the topology file defines the
behavior, these two bits are only intended for diagnosis and
performance checks.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211004212729.199550-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We log most of the SSP configurations except the clks_control. This
will be used to enable bclk/mclk early start so it's useful to show
the information to the user.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211004212729.199550-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In order to keep the widget use_count balanced, make sure the DAI
widgets are allocated once in hw_params and released in hw_free. A
'setup' status flag is used to deal with cases where the .hw_params
callback is invoked multiple times, and likewise with cases where
hw_free is invoked without hw_params being called first (which can
happen if the FE hw_params fails).
In addition, this patch frees the widgets in the suspend transition,
and reallocates them in the .prepare callback. The 'setup' flag helps
in this case differentiate between resume (setup needed) and
xruns (setup not needed).
This balanced operation was not needed previously but will be required
when SOF dynamic pipelines are enabled.
Co-developed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20211004171430.103674-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The DAI_CONFIG is used for both hw_params and hw_free. Use flags to
specify what stage the configuration applies to.
the DAI_CONFIG IPC may be sent also during the widget setup so each
flag is cleared after the IPC to restore the state.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20211004171430.103674-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a kernel debug flag to enable a one-shot topology
verification for all pipelines including the dynamic
ones. If the debug flag is set, all the topology
component loading will be verified during the complete
callback.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210927120517.20505-13-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for dynamic pipelines by modifying the PCM
hw_params ioctl implementation to determine the widgets
required for a PCM stream by querying the list of
connected DAPM widgets. This list is saved as part of
snd_sof_pcm_stream struct and will be used to setup the widgets.
The sof_widget_list_setup/free routines setup and free connected
DAPM widgets when a PCM is opened/closed. These routines accept
a list of connected DAPM widgets as input and determine the SOF
widgets, their corresponding pipeline widgets and connections
between them that need to be setup before the PCM is triggered.
Please note that the dynamic pipeline feature will only be enabled
for those pipelines whose dynamic_pipeline_widget flag is set in
topologies. Add a new token called SOF_TKN_SCHED_DYNAMIC_PIPELINE
that when set in topology will be applied to the
dynamic_pipeline_widget flag of the pipeline widget.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210927120517.20505-12-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With the implementation of the dynamic pipeline feature, widgets
will only be setup when a PCM is opened during the
hw_params ioctl. The BE hw_params callback is responsible for
sending the DAI_CONFIG for the DAI widgets in the DSP.
With dynamic pipelines, the DAI widgets will need to set up
first before sending the DAI_CONFIG IPC in the BE hw_params.
Update the BE hw_params/hw_free callbacks for all ALH, HDA and SSP
DAIs to set up/free the DAI widget before/after DAI_CONFIG IPC.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210927120517.20505-11-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new field, use_count to struct snd_sof_widget to keep track
of the usage count for each widget. Since widgets can belong to
multiple pipelines, this field will ensure that the widget
is setup only when the first pipeline that needs it is started
and freed when the last pipeline that needs it is stopped. There is
no need to protect the widget use_count access as the core already
handles mutual exclusion at the PCM level.
Add a new helper sof_widget_free() to handle freeing the SOF
widgets and export the sof_widget_setup/free() functions.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210927120517.20505-10-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In preparation for supporting dynamic pipelines, move the
widget setup, DAI config IPCs to the complete callback
during topology loading. For current topology where all
the pipelines are static, all the pipelines will be set up
during complete. For topologies with dynamic and static pipelines,
this will enable setting up only the static ones during
topology loading. Reuse the sof_restore_pipelines() function for
this purpose and rename it to sof_set_up_pipelines().
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210927120517.20505-9-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Restore kcontrols for each widget after it has been set up
successfully.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210927120517.20505-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add two new fields to save the source widget and sink widget
pointers in struct snd_sof_route to make it easier to look up
routes by source/sink widget. Also, add a flag to indicate
if the route has been set up in the DSP. These will be used
when the dynamic pipeline feature is implemented and routes
will have to be set up at run time.
Also, add a new sof_tear_down_pipelines() callback, that will
used to reset the set up status for all routes during suspend.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210927120517.20505-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Refactor the existing code to use helper functions to
set up/free widgets, send dai config and set up kcontrols for
widgets. These will be reused later on for setting up widgets in
the connected DAPM widgets list for a particular PCM when the
dynamic pipeline feature is implemented.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210927120517.20505-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Today, we set up all widgets required for all PCM streams
at the time of topology parsing even if they are not
used. An optimization would be to only set up the widgets
required for currently active PCM streams. This would give
the FW the opportunity to power gate unused memory blocks,
thereby saving power.
For dynamic pipelines, the widgets in the connected DAPM path
for each PCM will need to be set up at runtime. This patch
introduces a new token, DYNAMIC_PIPELINE, for scheduler type
widgets that indicate whether a pipeline should be set up
statically during topology load or at runtime when the PCM is
opened. Introduce a new field called dynamic_pipeline_widget
in struct snd_sof_widget to save the value of the parsed token.
The token is set only for the pipeline (scheduler type)
widget and must be propagated to all widgets in the same
pipeline during topology load. Introduce another field called
pipe_widget in struct snd_sof_widget that saves the pointer to
the scheduler widget with the same pipeline ID as that of the
widget. This field is populated when the pipeline completion
callback is invoked during topology loading.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210927120517.20505-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new field to save the access setting for all controls
in struct snd_sof_control. This will be used to ensure that
only widgets belonging to static pipelines have volatile
controls.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210927120517.20505-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the SOF driver, the operations performed in the complete callback
can fail and therefore topology loading should return an error in
such cases. So, change the signature of the complete op
in struct snd_soc_tplg_ops to return an int to return the error.
Also, amend the complete callback functions in the SOF driver and
the SKL driver to conform with the new signature.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210927120517.20505-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have growing number of options under SND_SOC_SOF_TOPLEVEL as SOF
adaptation is growing (Intel, NXP, AMD and Mediatek) and new features are
added.
It will make the menuconfig user experience much cleaner if we move the
SOF options under a separate page.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20210930070438.16846-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If we get an error on reply (msg->reply_error) then we should print the
error value out.
At the same time extend the print to include the message size as well and
do the same in case of a timeout.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210928073615.29574-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These helped troubleshoot some DMA issue in SOF.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210928102635.26227-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If an invalid stream is passed to snd_sof_ipc_msg_data() it won't
fill the provided object with data. The caller has to be able to
recognise such cases to avoid handling invalid data. Make the
function return an error when failing.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210928103516.8066-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Sparse (make C=2) complains about undeclared variables. Fix by adding
a real prototype instead of 'extern' in sof-of-dev.c
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210928072807.27838-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no restore_stream flag anymmore.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210928074030.30553-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In order to provide more information in case of timeout observed while
reading STREAM_SD_OFFSET, print out the stream name or in case there is
no audio stream associated (like dma-trace), print "--"
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20210928081744.4785-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The initial hdac_stream code was adapted a third time with the same
locking issues. Move the spin_lock outside the loops and make sure the
fields are protected on read/write.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210924192417.169243-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Mark Brown
Daniel Baluta
Peter Ujfalusi
Ranjani Sridharan
Bard Liao
Keyon Jie
Pierre-Louis Bossart
Ajit Kumar Pandey
Guennadi Liakhovetski
Rikard Falkeborn
Allen-KH Cheng
Kai Vehmanen
Mac Chiang
Hui Wang
Geert Uytterhoeven
Yang Yingliang
YC Hung
V sujith kumar Reddy
Arnd Bergmann
Peter Ujfalusi
Takashi Iwai
Rander Wang
Bud Liviu-Alexandru
Marc Herbert