Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout
the stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower
iTLB pressure and prevents identity mapping huge pages from
getting split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop
the user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if called
from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling
of TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ELpe
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"The sprinkling of SPI drivers is because we added a new one and Mark
sent us a SPI driver interface conversion pull request.
Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout the
stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower iTLB
pressure and prevents identity mapping huge pages from getting
split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop the
user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if
called from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling of
TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup"
* tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits)
llc: fix netdevice reference leaks in llc_ui_bind()
drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool
ice: don't allow to run ice_send_event_to_aux() in atomic ctx
ice: fix 'scheduling while atomic' on aux critical err interrupt
net/sched: fix incorrect vlan_push_eth dest field
net: bridge: mst: Restrict info size queries to bridge ports
net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init()
drivers: net: xgene: Fix regression in CRC stripping
net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT
net: dsa: fix missing host-filtered multicast addresses
net/mlx5e: Fix build warning, detected write beyond size of field
iwlwifi: mvm: Don't fail if PPAG isn't supported
selftests/bpf: Fix kprobe_multi test.
Revert "rethook: x86: Add rethook x86 implementation"
Revert "arm64: rethook: Add arm64 rethook implementation"
Revert "powerpc: Add rethook support"
Revert "ARM: rethook: Add rethook arm implementation"
netdevice: add missing dm_private kdoc
net: bridge: mst: prevent NULL deref in br_mst_info_size()
selftests: forwarding: Use same VRF for port and VLAN upper
...
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCYji6mxQcem9oYXJAbGlu
dXguaWJtLmNvbQAKCRDLwZzRsCrn5bbvAQDB0uFJXS+FutMZSdfoXdvoV36piSyV
KNEo+sM0Ie0FTQEAtHnMZbIB2Tc5szJXaxgDbr6XbRKW4aaJonkvnYF93QQ=
=ZuAU
-----END PGP SIGNATURE-----
Merge tag 'integrity-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity subsystem updates from Mimi Zohar:
"Except for extending the 'encrypted' key type to support user provided
data, the rest is code cleanup, __setup() usage bug fix, and a trivial
change"
* tag 'integrity-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
MAINTAINERS: add missing security/integrity/platform_certs
EVM: fix the evm= __setup handler return value
KEYS: encrypted: Instantiate key with user-provided decrypted data
ima: define ima_max_digest_data struct without a flexible array variable
ima: rename IMA_ACTION_FLAGS to IMA_NONACTION_FLAGS
ima: Return error code obtained from securityfs functions
MAINTAINERS: add missing "security/integrity" directory
ima: Fix trivial typos in the comments
__ima_inode_hash() checks if a digest has been already calculated by
looking for the integrity_iint_cache structure associated to the passed
inode.
Users of ima_file_hash() (e.g. eBPF) might be interested in obtaining the
information without having to setup an IMA policy so that the digest is
always available at the time they call this function.
In addition, they likely expect the digest to be fresh, e.g. recalculated
by IMA after a file write. Although getting the digest from the
bprm_committed_creds hook (as in the eBPF test) ensures that the digest is
fresh, as the IMA hook is executed before that hook, this is not always the
case (e.g. for the mmap_file hook).
Call ima_collect_measurement() in __ima_inode_hash(), if the file
descriptor is available (passed by ima_file_hash()) and the digest is not
available/not fresh, and store the file measurement in a temporary
integrity_iint_cache structure.
This change does not cause memory usage increase, due to using the
temporary integrity_iint_cache structure, and due to freeing the
ima_digest_data structure inside integrity_iint_cache before exiting from
__ima_inode_hash().
For compatibility reasons, the behavior of ima_inode_hash() remains
unchanged.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20220302111404.193900-3-roberto.sassu@huawei.com
Fix the following warnings in ima_main.c, displayed with W=n make argument:
security/integrity/ima/ima_main.c:432: warning: Function parameter or
member 'vma' not described in 'ima_file_mprotect'
security/integrity/ima/ima_main.c:636: warning: Function parameter or
member 'inode' not described in 'ima_post_create_tmpfile'
security/integrity/ima/ima_main.c:636: warning: Excess function parameter
'file' description in 'ima_post_create_tmpfile'
security/integrity/ima/ima_main.c:843: warning: Function parameter or
member 'load_id' not described in 'ima_post_load_data'
security/integrity/ima/ima_main.c:843: warning: Excess function parameter
'id' description in 'ima_post_load_data'
Also, fix some style issues in the description of ima_post_create_tmpfile()
and ima_post_path_mknod().
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20220302111404.193900-2-roberto.sassu@huawei.com
To support larger hash digests in the 'iint' cache, instead of defining
the 'digest' field as the maximum digest size, the 'digest' field was
defined as a flexible array variable. The "ima_digest_data" struct was
wrapped inside a local structure with the maximum digest size. But
before adding the record to the iint cache, memory for the exact digest
size was dynamically allocated.
The original reason for defining the 'digest' field as a flexible array
variable is still valid for the 'iint' cache use case. Instead of
wrapping the 'ima_digest_data' struct in a local structure define
'ima_max_digest_data' struct.
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Simple policy rule options, such as fowner, uid, or euid, can be checked
immediately, while other policy rule options, such as requiring a file
signature, need to be deferred.
The 'flags' field in the integrity_iint_cache struct contains the policy
action', 'subaction', and non action/subaction.
action: measure/measured, appraise/appraised, (collect)/collected,
audit/audited
subaction: appraise status for each hook (e.g. file, mmap, bprm, read,
creds)
non action/subaction: deferred policy rule options and state
Rename the IMA_ACTION_FLAGS to IMA_NONACTION_FLAGS.
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
If an error occurs when creating a securityfs file, return the exact
error code to the caller.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
There are a few minor typos in the comments. Fix these.
Signed-off-by: Austin Kim <austindh.kim@gmail.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Commit c2426d2ad5 ("ima: added support for new kernel cmdline parameter
ima_template_fmt") introduced an additional check on the ima_template
variable to avoid multiple template selection.
Unfortunately, ima_template could be also set by the setup function of the
ima_hash= parameter, when it calls ima_template_desc_current(). This causes
attempts to choose a new template with ima_template= or with
ima_template_fmt=, after ima_hash=, to be ignored.
Achieve the goal of the commit mentioned with the new static variable
template_setup_done, so that template selection requests after ima_hash=
are not ignored.
Finally, call ima_init_template_list(), if not already done, to initialize
the list of templates before lookup_template_desc() is called.
Reported-by: Guo Zihua <guozihua@huawei.com>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Cc: stable@vger.kernel.org
Fixes: c2426d2ad5 ("ima: added support for new kernel cmdline parameter ima_template_fmt")
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The removal of ima_dir currently fails since ima_policy still exists, so
remove the ima_policy file before removing the directory.
Fixes: 4af4662fa4 ("integrity: IMA policy")
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
There is no good reason to keep genhd.h separate from the main blkdev.h
header that includes it. So fold the contents of genhd.h into blkdev.h
and remove genhd.h entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220124093913.742411-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCYdxh3xQcem9oYXJAbGlu
dXguaWJtLmNvbQAKCRDLwZzRsCrn5bXsAP9xioC+sDpA+KgicrTxLQp2HBHVdkdj
hnsSw7KE6d1YFwD/Zu1BPi/iX1HHcEvTm34x9jKWeU54VCyqsXJG+zArDA0=
=/eFf
-----END PGP SIGNATURE-----
Merge tag 'integrity-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity subsystem updates from Mimi Zohar:
"The few changes are all kexec related:
- The MOK keys are loaded onto the .platform keyring in order to
verify the kexec kernel image signature.
However, the MOK keys should only be trusted when secure boot is
enabled. Before loading the MOK keys onto the .platform keyring,
make sure the system is booted in secure boot mode.
- When carrying the IMA measurement list across kexec, limit dumping
the measurement list to when dynamic debug or CONFIG_DEBUG is
enabled.
- kselftest: add kexec_file_load selftest support for PowerNV and
other cleanup"
* tag 'integrity-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
selftests/kexec: Enable secureboot tests for PowerPC
ima: silence measurement list hexdump during kexec
selftests/kexec: update searching for the Kconfig
selftest/kexec: fix "ignored null byte in input" warning
integrity: Do not load MOK and MOKx when secure boot be disabled
ima: Fix undefined arch_ima_get_secureboot() and co
Directly calling print_hex_dump() dumps the IMA measurement list on soft
resets (kexec) straight to the syslog (kmsg/dmesg) without considering the
DEBUG flag or the dynamic debug state, causing the output to be always
printed, including during boot time.
Since this output is only valid for IMA debugging, but not necessary on
normal kexec operation, print_hex_dump_debug() adheres to the pr_debug()
behavior: the dump is only printed to syslog when DEBUG is defined or when
explicitly requested by the user through dynamic debugging.
Signed-off-by: Bruno Meneguele <bmeneg@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The security_task_getsecid_subj() LSM hook invites misuse by allowing
callers to specify a task even though the hook is only safe when the
current task is referenced. Fix this by removing the task_struct
argument to the hook, requiring LSM implementations to use the
current task. While we are changing the hook declaration we also
rename the function to security_current_getsecid_subj() in an effort
to reinforce that the hook captures the subjective credentials of the
current task and not an arbitrary task on the system.
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
IMA currently supports the concept of rules based on uid where the rule
is based on the uid of the file owner or the uid of the user accessing
the file. Provide the ability to have similar rules based on gid.
Signed-off-by: Curtis Veit <veit@vpieng.com>
Co-developed-by: Alex Henrie <alexh@vpitech.com>
Signed-off-by: Alex Henrie <alexh@vpitech.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
scripts/checkpatch.pl wants function arguments to have names; and Mimi
prefers to keep the line length in functions to 80 characters or less.
Signed-off-by: Alex Henrie <alexh@vpitech.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The current IMA ruleset is identified by the variable "ima_rules"
that default to "&ima_default_rules". When loading a custom policy
for the first time, the variable is updated to "&ima_policy_rules"
instead. That update isn't RCU-safe, and deadlocks are possible.
Indeed, some functions like ima_match_policy() may loop indefinitely
when traversing "ima_default_rules" with list_for_each_entry_rcu().
When iterating over the default ruleset back to head, if the list
head is "ima_default_rules", and "ima_rules" have been updated to
"&ima_policy_rules", the loop condition (&entry->list != ima_rules)
stays always true, traversing won't terminate, causing a soft lockup
and RCU stalls.
Introduce a temporary value for "ima_rules" when iterating over
the ruleset to avoid the deadlocks.
Signed-off-by: liqiong <liqiong@nfschina.com>
Reviewed-by: THOBY Simon <Simon.THOBY@viveris.fr>
Fixes: 38d859f991 ("IMA: policy can now be updated multiple times")
Reported-by: kernel test robot <lkp@intel.com> (Fix sparse: incompatible types in comparison expression.)
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCYS4c6hQcem9oYXJAbGlu
dXguaWJtLmNvbQAKCRDLwZzRsCrn5b4OAP9l7cnpkOzVUtjoNIIYdIiKTDp+Kb8v
3o08lxtyzALfKgEAlrizzLfphqLa2yCdxbyaTjkx19J7tav27xVti8uVGgs=
=hIxY
-----END PGP SIGNATURE-----
Merge tag 'integrity-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity subsystem updates from Mimi Zohar:
- Limit the allowed hash algorithms when writing security.ima xattrs or
verifying them, based on the IMA policy and the configured hash
algorithms.
- Return the calculated "critical data" measurement hash and size to
avoid code duplication. (Preparatory change for a proposed LSM.)
- and a single patch to address a compiler warning.
* tag 'integrity-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
IMA: reject unknown hash algorithms in ima_get_hash_algo
IMA: prevent SETXATTR_CHECK policy rules with unavailable algorithms
IMA: introduce a new policy option func=SETXATTR_CHECK
IMA: add a policy option to restrict xattr hash algorithms on appraisal
IMA: add support to restrict the hash algorithms used for file appraisal
IMA: block writes of the security.ima xattr with unsupported algorithms
IMA: remove the dependency on CRYPTO_MD5
ima: Add digest and digest_len params to the functions to measure a buffer
ima: Return int in the functions to measure a buffer
ima: Introduce ima_get_current_hash_algo()
IMA: remove -Wmissing-prototypes warning
The new function validate_hash_algo() assumed that ima_get_hash_algo()
always return a valid 'enum hash_algo', but it returned the
user-supplied value present in the digital signature without
any bounds checks.
Update ima_get_hash_algo() to always return a valid hash algorithm,
defaulting on 'ima_hash_algo' when the user-supplied value inside
the xattr is invalid.
Signed-off-by: THOBY Simon <Simon.THOBY@viveris.fr>
Reported-by: syzbot+e8bafe7b82c739eaf153@syzkaller.appspotmail.com
Fixes: 50f742dd91 ("IMA: block writes of the security.ima xattr with unsupported algorithms")
Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
SETXATTR_CHECK policy rules assume that any algorithm listed in the
'appraise_algos' flag must be accepted when performing setxattr() on
the security.ima xattr. However nothing checks that they are
available in the current kernel. A userland application could hash
a file with a digest that the kernel wouldn't be able to verify.
However, if SETXATTR_CHECK is not in use, the kernel already forbids
that xattr write.
Verify that algorithms listed in appraise_algos are available to the
current kernel and reject the policy update otherwise. This will fix
the inconsistency between SETXATTR_CHECK and non-SETXATTR_CHECK
behaviors.
That filtering is only performed in ima_parse_appraise_algos() when
updating policies so that we do not have to pay the price of
allocating a hash object every time validate_hash_algo() is called
in ima_inode_setxattr().
Signed-off-by: THOBY Simon <Simon.THOBY@viveris.fr>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
While users can restrict the accepted hash algorithms for the
security.ima xattr file signature when appraising said file, users
cannot restrict the algorithms that can be set on that attribute:
any algorithm built in the kernel is accepted on a write.
Define a new value for the ima policy option 'func' that restricts
globally the hash algorithms accepted when writing the security.ima
xattr.
When a policy contains a rule of the form
appraise func=SETXATTR_CHECK appraise_algos=sha256,sha384,sha512
only values corresponding to one of these three digest algorithms
will be accepted for writing the security.ima xattr. Attempting to
write the attribute using another algorithm (or "free-form" data)
will be denied with an audit log message. In the absence of such a
policy rule, the default is still to only accept hash algorithms
built in the kernel (with all the limitations that entails).
Signed-off-by: THOBY Simon <Simon.THOBY@viveris.fr>
Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The kernel has the ability to restrict the set of hash algorithms it
accepts for the security.ima xattr when it appraises files.
Define a new IMA policy rule option "appraise_algos=", using the
mentioned mechanism to expose a user-toggable policy knob to opt-in
to that restriction and select the desired set of algorithms that
must be accepted.
When a policy rule uses the 'appraise_algos' option, appraisal of a
file referenced by that rule will now fail if the digest algorithm
employed to hash the file was not one of those explicitly listed in
the option. In its absence, any hash algorithm compiled in the
kernel will be accepted.
For example, on a system where SELinux is properly deployed, the rule
appraise func=BPRM_CHECK obj_type=iptables_exec_t \
appraise_algos=sha256,sha384
will block the execution of iptables if the xattr security.ima of its
executables were not hashed with either sha256 or sha384.
Signed-off-by: THOBY Simon <Simon.THOBY@viveris.fr>
Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The kernel accepts any hash algorithm as a value for the security.ima
xattr. Users may wish to restrict the accepted algorithms to only
support strong cryptographic ones.
Provide the plumbing to restrict the permitted set of hash algorithms
used for verifying file hashes and signatures stored in security.ima
xattr.
Signed-off-by: THOBY Simon <Simon.THOBY@viveris.fr>
Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
By default, writes to the extended attributes security.ima will be
allowed even if the hash algorithm used for the xattr is not compiled
in the kernel (which does not make sense because the kernel would not
be able to appraise that file as it lacks support for validating the
hash).
Prevent and audit writes to the security.ima xattr if the hash algorithm
used in the new value is not available in the current kernel.
Signed-off-by: THOBY Simon <Simon.THOBY@viveris.fr>
Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
MD5 is a weak digest algorithm that shouldn't be used for cryptographic
operation. It hinders the efficiency of a patch set that aims to limit
the digests allowed for the extended file attribute namely security.ima.
MD5 is no longer a requirement for IMA, nor should it be used there.
The sole place where we still use the MD5 algorithm inside IMA is setting
the ima_hash algorithm to MD5, if the user supplies 'ima_hash=md5'
parameter on the command line. With commit ab60368ab6 ("ima: Fallback
to the builtin hash algorithm"), setting "ima_hash=md5" fails gracefully
when CRYPTO_MD5 is not set:
ima: Can not allocate md5 (reason: -2)
ima: Allocating md5 failed, going to use default hash algorithm sha256
Remove the CRYPTO_MD5 dependency for IMA.
Signed-off-by: THOBY Simon <Simon.THOBY@viveris.fr>
Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
[zohar@linux.ibm.com: include commit number in patch description for
stable.]
Cc: stable@vger.kernel.org # 4.17
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
DM configures a block device with various target specific attributes
passed to it as a table. DM loads the table, and calls each target’s
respective constructors with the attributes as input parameters.
Some of these attributes are critical to ensure the device meets
certain security bar. Thus, IMA should measure these attributes, to
ensure they are not tampered with, during the lifetime of the device.
So that the external services can have high confidence in the
configuration of the block-devices on a given system.
Some devices may have large tables. And a given device may change its
state (table-load, suspend, resume, rename, remove, table-clear etc.)
many times. Measuring these attributes each time when the device
changes its state will significantly increase the size of the IMA logs.
Further, once configured, these attributes are not expected to change
unless a new table is loaded, or a device is removed and recreated.
Therefore the clear-text of the attributes should only be measured
during table load, and the hash of the active/inactive table should be
measured for the remaining device state changes.
Export IMA function ima_measure_critical_data() to allow measurement
of DM device parameters, as well as target specific attributes, during
table load. Compute the hash of the inactive table and store it for
measurements during future state change. If a load is called multiple
times, update the inactive table hash with the hash of the latest
populated table. So that the correct inactive table hash is measured
when the device transitions to different states like resume, remove,
rename, etc.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com> # leak fix
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
This patch performs the final modification necessary to pass the buffer
measurement to callers, so that they provide a functionality similar to
ima_file_hash(). It adds the 'digest' and 'digest_len' parameters to
ima_measure_critical_data() and process_buffer_measurement().
These functions calculate the digest even if there is no suitable rule in
the IMA policy and, in this case, they simply return 1 before generating a
new measurement entry.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
ima_measure_critical_data() and process_buffer_measurement() currently
don't return a result as, unlike appraisal-related functions, the result is
not used by callers to deny an operation. Measurement-related functions
instead rely on the audit subsystem to notify the system administrator when
an error occurs.
However, ima_measure_critical_data() and process_buffer_measurement() are a
special case, as these are the only functions that can return a buffer
measurement (for files, there is ima_file_hash()). In a subsequent patch,
they will be modified to return the calculated digest.
In preparation to return the result of the digest calculation, this patch
modifies the return type from void to int, and returns 0 if the buffer has
been successfully measured, a negative value otherwise.
Given that the result of the measurement is still not necessary, this patch
does not modify the behavior of existing callers by processing the returned
value. For those, the return value is ignored.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Acked-by: Paul Moore <paul@paul-moore.com> (for the SELinux bits)
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Buffer measurements, unlike file measurements, are not accessible after the
measurement is done, as buffers are not suitable for use with the
integrity_iint_cache structure (there is no index, for files it is the
inode number). In the subsequent patches, the measurement (digest) will be
returned directly by the functions that perform the buffer measurement,
ima_measure_critical_data() and process_buffer_measurement().
A caller of those functions also needs to know the algorithm used to
calculate the digest. Instead of adding the algorithm as a new parameter to
the functions, this patch provides it separately with the new function
ima_get_current_hash_algo().
Since the hash algorithm does not change after the IMA setup phase, there
is no risk of races (obtaining a digest calculated with a different
algorithm than the one returned).
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
[zohar@linux.ibm.com: annotate ima_hash_algo as __ro_after_init]
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
With W=1 build, the compiler throws warning message as below:
security/integrity/ima/ima_mok.c:24:12: warning:
no previous prototype for ‘ima_mok_init’ [-Wmissing-prototypes]
__init int ima_mok_init(void)
Silence the warning by adding static keyword to ima_mok_init().
Signed-off-by: Austin Kim <austin.kim@lge.com>
Fixes: 41c89b64d7 ("IMA: create machine owner and blacklist keyrings")
Cc: stable@vger.kernel.org
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
IMA measures contents of a given file/buffer/critical-data record,
and properly re-measures it on change. However, IMA does not measure
the duplicate value for a given record, since TPM extend is a very
expensive operation. For example, if the record changes from value
'v#1' to 'v#2', and then back to 'v#1', IMA will not measure and log
the last change to 'v#1', since the hash of 'v#1' for that record is
already present in the IMA htable. This limits the ability of an
external attestation service to accurately determine the current state
of the system. The service would incorrectly conclude that the latest
value of the given record on the system is 'v#2', and act accordingly.
Define and use a new Kconfig option IMA_DISABLE_HTABLE to permit
duplicate records in the IMA measurement list.
In addition to the duplicate measurement records described above,
other duplicate file measurement records may be included in the log,
when CONFIG_IMA_DISABLE_HTABLE is enabled. For example,
- i_version is not enabled,
- i_generation changed,
- same file present on different filesystems,
- an inode is evicted from dcache
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
[zohar@linux.ibm.com: updated list of duplicate measurement records]
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The function prototype for ima_add_kexec_buffer() is present
in 'linux/ima.h'. But this header file is not included in
ima_kexec.c where the function is implemented. This results
in the following compiler warning when "-Wmissing-prototypes" flag
is turned on:
security/integrity/ima/ima_kexec.c:81:6: warning: no previous prototype
for function 'ima_add_kexec_buffer' [-Wmissing-prototypes]
Include the header file 'linux/ima.h' in ima_kexec.c to fix
the compiler warning.
Fixes: dce92f6b11 (arm64: Enable passing IMA log to next kernel on kexec)
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
In preparation to enable -Wimplicit-fallthrough for Clang, fix a
fall-through warning by explicitly adding a break statement instead
of just letting the code fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
This patch fixes the sparse warning for ima_post_key_create_or_update() by
adding the header file that defines the prototype (linux/ima.h).
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The endianness of a variable written to the measurement list cannot be
determined at compile time, as it depends on the value of the
ima_canonical_fmt global variable (set through a kernel option with the
same name if the machine is big endian).
If ima_canonical_fmt is false, the endianness of a variable is the same as
the machine; if ima_canonical_fmt is true, the endianness is little endian.
The warning arises due to this type of instruction:
var = cpu_to_leXX(var)
which tries to assign a value in little endian to a variable with native
endianness (little or big endian).
Given that the variables set with this instruction are not used in any
operation but just written to a buffer, it is safe to force the type of the
value being set to be the same of the type of the variable with:
var = (__force <var type>)cpu_to_leXX(var)
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The code expects that the values being parsed from a buffer when the
ima_canonical_fmt global variable is true are in little endian. Thus, this
patch sets the casting types accordingly.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
With the recent introduction of the evmsig template field, remote verifiers
can obtain the EVM portable signature instead of the IMA signature, to
verify file metadata.
After introducing the new fields to include file metadata in the
measurement list, this patch finally defines the evm-sig template, whose
format is:
d-ng|n-ng|evmsig|xattrnames|xattrlengths|xattrvalues|iuid|igid|imode
xattrnames, xattrlengths and xattrvalues are populated only from defined
EVM protected xattrs, i.e. the ones that EVM considers to verify the
portable signature. xattrnames and xattrlengths are populated only if the
xattr is present.
xattrnames and xattrlengths are not necessary for verifying the EVM
portable signature, but they are included for completeness of information,
if a remote verifier wants to infer more from file metadata.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
This patch defines the new template fields xattrnames, xattrlengths and
xattrvalues, which contain respectively a list of xattr names (strings,
separated by |), lengths (u32, hex) and values (hex). If an xattr is not
present, the name and length are not displayed in the measurement list.
Reported-by: kernel test robot <lkp@intel.com> (Missing prototype def)
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
This patch defines the new template field imode, which includes the
inode mode. It can be used by a remote verifier to verify the EVM portable
signature, if it was included with the template fields sig or evmsig.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
This patch defines the new template fields iuid and igid, which include
respectively the inode UID and GID. For idmapped mounts, still the original
UID and GID are provided.
These fields can be used to verify the EVM portable signature, if it was
included with the template fields sig or evmsig.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
This patch introduces the new function ima_show_template_uint(). This can
be used for showing integers of different sizes in ASCII format. The
function ima_show_template_data_ascii() automatically determines how to
print a stored integer by checking the integer size.
If integers have been written in canonical format,
ima_show_template_data_ascii() calls the appropriate leXX_to_cpu() function
to correctly display the value.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Files might come from a remote source and might have xattrs, including
security.ima. It should not be IMA task to decide whether security.ima
should be kept or not. This patch removes the removexattr() system
call in ima_inode_post_setattr().
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
With the patch to accept EVM portable signatures when the
appraise_type=imasig requirement is specified in the policy, appraisal can
be successfully done even if the file does not have an IMA signature.
However, remote attestation would not see that a different signature type
was used, as only IMA signatures can be included in the measurement list.
This patch solves the issue by introducing the new template field 'evmsig'
to show EVM portable signatures and by including its value in the existing
field 'sig' if the IMA signature is not found.
Suggested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
System administrators can require that all accessed files have a signature
by specifying appraise_type=imasig in a policy rule.
Currently, IMA signatures satisfy this requirement. Appended signatures may
also satisfy this requirement, but are not applicable as IMA signatures.
IMA/appended signatures ensure data source authentication for file content
and prevent any change. EVM signatures instead ensure data source
authentication for file metadata. Given that the digest or signature of the
file content must be included in the metadata, EVM signatures provide the
same file data guarantees of IMA signatures, as well as providing file
metadata guarantees.
This patch lets systems protected with EVM signatures pass appraisal
verification if the appraise_type=imasig requirement is specified in the
policy. This facilitates deployment in the scenarios where only EVM
signatures are available.
The patch makes the following changes:
file xattr types:
security.ima: IMA_XATTR_DIGEST/IMA_XATTR_DIGEST_NG
security.evm: EVM_XATTR_PORTABLE_DIGSIG
execve(), mmap(), open() behavior (with appraise_type=imasig):
before: denied (file without IMA signature, imasig requirement not met)
after: allowed (file with EVM portable signature, imasig requirement met)
open(O_WRONLY) behavior (without appraise_type=imasig):
before: allowed (file without IMA signature, not immutable)
after: denied (file with EVM portable signature, immutable)
In addition, similarly to IMA signatures, this patch temporarily allows
new files without or with incomplete metadata to be opened so that content
can be written.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Linus Torvalds
Roberto Sassu
Mimi Zohar
Stefan Berger
Austin Kim
Christoph Hellwig
Bruno Meneguele
Paul Moore
Petr Vorel
Curtis Veit
Alex Henrie
liqiong
THOBY Simon
Tushar Sugandhi
Austin Kim
Lakshmi Ramasubramanian
Gustavo A. R. Silva