While the comment was correct that this flag was intended to convey the
block no-snoop support in the IOMMU, it has become widely implemented and
used to mean the IOMMU supports IOMMU_CACHE as a map flag. Only the Intel
driver was different.
Now that the Intel driver is using enforce_cache_coherency() update the
comment to make it clear that IOMMU_CAP_CACHE_COHERENCY is only about
IOMMU_CACHE. Fix the Intel driver to return true since IOMMU_CACHE always
works.
The two places that test this flag, usnic and vdpa, are both assigning
userspace pages to a driver controlled iommu_domain and require
IOMMU_CACHE behavior as they offer no way for userspace to synchronize
caches.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v3-2cf356649677+a32-intel_no_snoop_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This new mechanism will replace using IOMMU_CAP_CACHE_COHERENCY and
IOMMU_CACHE to control the no-snoop blocking behavior of the IOMMU.
Currently only Intel and AMD IOMMUs are known to support this
feature. They both implement it as an IOPTE bit, that when set, will cause
PCIe TLPs to that IOVA with the no-snoop bit set to be treated as though
the no-snoop bit was clear.
The new API is triggered by calling enforce_cache_coherency() before
mapping any IOVA to the domain which globally switches on no-snoop
blocking. This allows other implementations that might block no-snoop
globally and outside the IOPTE - AMD also documents such a HW capability.
Leave AMD out of sync with Intel and have it block no-snoop even for
in-kernel users. This can be trivially resolved in a follow up patch.
Only VFIO needs to call this API because it does not have detailed control
over the device to avoid requesting no-snoop behavior at the device
level. Other places using domains with real kernel drivers should simply
avoid asking their devices to set the no-snoop bit.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v3-2cf356649677+a32-intel_no_snoop_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The iommu group changes notifer is not referenced in the tree. Remove it
to avoid dead code.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20220418005000.897664-12-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Multiple devices may be placed in the same IOMMU group because they
cannot be isolated from each other. These devices must either be
entirely under kernel control or userspace control, never a mixture.
This adds dma ownership management in iommu core and exposes several
interfaces for the device drivers and the device userspace assignment
framework (i.e. VFIO), so that any conflict between user and kernel
controlled dma could be detected at the beginning.
The device driver oriented interfaces are,
int iommu_device_use_default_domain(struct device *dev);
void iommu_device_unuse_default_domain(struct device *dev);
By calling iommu_device_use_default_domain(), the device driver tells
the iommu layer that the device dma is handled through the kernel DMA
APIs. The iommu layer will manage the IOVA and use the default domain
for DMA address translation.
The device user-space assignment framework oriented interfaces are,
int iommu_group_claim_dma_owner(struct iommu_group *group,
void *owner);
void iommu_group_release_dma_owner(struct iommu_group *group);
bool iommu_group_dma_owner_claimed(struct iommu_group *group);
The device userspace assignment must be disallowed if the DMA owner
claiming interface returns failure.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20220418005000.897664-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
VT-d's dmar_platform_optin() actually represents a combination of
properties fairly well standardised by Microsoft as "Pre-boot DMA
Protection" and "Kernel DMA Protection"[1]. As such, we can provide
interested consumers with an abstracted capability rather than
driver-specific interfaces that won't scale. We name it for the former
aspect since that's what external callers are most likely to be
interested in; the latter is for the IOMMU layer to handle itself.
[1] https://docs.microsoft.com/en-us/windows-hardware/design/device-experiences/oem-kernel-dma-protection
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/d6218dff2702472da80db6aec2c9589010684551.1650878781.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
iommu_capable() only really works for systems where all IOMMU instances
are completely homogeneous, and all devices are IOMMU-mapped. Implement
the new variant which will be able to give a more accurate answer for
whichever device the caller is actually interested in, and even more so
once all the external users have been converted and we can reliably pass
the device pointer through the internal driver interface too.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/8407eb9586677995b7a9fd70d0fd82d85929a9bb.1650878781.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Move the domain specific operations out of struct iommu_ops into a new
structure that only has domain specific operations. This solves the
problem of needing to know if the method vector for a given operation
needs to be retrieved from the device or the domain. Logically the domain
ops are the ones that make sense for external subsystems and endpoint
drivers to use, while device ops, with the sole exception of domain_alloc,
are IOMMU API internals.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20220216025249.3459465-10-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The is_attach_deferred iommu_ops callback is a device op. The domain
argument is unnecessary and never used. Remove it to make code clean.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20220216025249.3459465-9-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The common iommu_ops is hooked to both device and domain. When a helper
has both device and domain pointer, the way to get the iommu_ops looks
messy in iommu core. This sorts out the way to get iommu_ops. The device
related helpers go through device pointer, while the domain related ones
go through domain pointer.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20220216025249.3459465-8-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The apply_resv_region callback in iommu_ops was introduced to reserve an
IOVA range in the given DMA domain when the IOMMU driver manages the IOVA
by itself. As all drivers converted to use dma-iommu in the core, there's
no driver using this anymore. Remove it to avoid dead code.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20220216025249.3459465-6-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The aux-domain related interfaces and iommu_ops are not referenced
anywhere in the tree. We've also reached a consensus to redesign it
based the new iommufd framework. Remove them to avoid dead code.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20220216025249.3459465-5-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The guest pasid related uapi interfaces and definitions are not referenced
anywhere in the tree. We've also reached a consensus to replace them with
a new iommufd design. Remove them to avoid dead code.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20220216025249.3459465-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
page->freelist is for the use of slab. We already have the ability
to free a list of pages in the core mm, but it requires the use of a
list_head and for the pages to be chained together through page->lru.
Switch the Intel IOMMU and IOVA code over to using free_pages_list().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
[rm: split from original patch, cosmetic tweaks, fix fq entries]
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/2115b560d9a0ce7cd4b948bd51a2b7bde8fdfd59.1639753638.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Including:
- New DART IOMMU driver for Apple Silicon M1 chips.
- Optimizations for iommu_[map/unmap] performance
- Selective TLB flush support for the AMD IOMMU driver to make
it more efficient on emulated IOMMUs.
- Rework IOVA setup and default domain type setting to move more
code out of IOMMU drivers and to support runtime switching
between certain types of default domains.
- VT-d Updates from Lu Baolu:
- Update the virtual command related registers
- Enable Intel IOMMU scalable mode by default
- Preset A/D bits for user space DMA usage
- Allow devices to have more than 32 outstanding PRs
- Various cleanups
- ARM SMMU Updates from Will Deacon:
- SMMUv3: Minor optimisation to avoid zeroing struct members on CMD submission
- SMMUv3: Increased use of batched commands to reduce submission latency
- SMMUv3: Refactoring in preparation for ECMDQ support
- SMMUv2: Fix races when probing devices with identical StreamIDs
- SMMUv2: Optimise walk cache flushing for Qualcomm implementations
- SMMUv2: Allow deep sleep states for some Qualcomm SoCs with shared clocks
- Various smaller optimizations, cleanups, and fixes
-----BEGIN PGP SIGNATURE-----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=zVaQ
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- New DART IOMMU driver for Apple Silicon M1 chips
- Optimizations for iommu_[map/unmap] performance
- Selective TLB flush support for the AMD IOMMU driver to make it more
efficient on emulated IOMMUs
- Rework IOVA setup and default domain type setting to move more code
out of IOMMU drivers and to support runtime switching between certain
types of default domains
- VT-d Updates from Lu Baolu:
- Update the virtual command related registers
- Enable Intel IOMMU scalable mode by default
- Preset A/D bits for user space DMA usage
- Allow devices to have more than 32 outstanding PRs
- Various cleanups
- ARM SMMU Updates from Will Deacon:
SMMUv3:
- Minor optimisation to avoid zeroing struct members on CMD submission
- Increased use of batched commands to reduce submission latency
- Refactoring in preparation for ECMDQ support
SMMUv2:
- Fix races when probing devices with identical StreamIDs
- Optimise walk cache flushing for Qualcomm implementations
- Allow deep sleep states for some Qualcomm SoCs with shared clocks
- Various smaller optimizations, cleanups, and fixes
* tag 'iommu-updates-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (85 commits)
iommu/io-pgtable: Abstract iommu_iotlb_gather access
iommu/arm-smmu: Fix missing unlock on error in arm_smmu_device_group()
iommu/vt-d: Add present bit check in pasid entry setup helpers
iommu/vt-d: Use pasid_pte_is_present() helper function
iommu/vt-d: Drop the kernel doc annotation
iommu/vt-d: Allow devices to have more than 32 outstanding PRs
iommu/vt-d: Preset A/D bits for user space DMA usage
iommu/vt-d: Enable Intel IOMMU scalable mode by default
iommu/vt-d: Refactor Kconfig a bit
iommu/vt-d: Remove unnecessary oom message
iommu/vt-d: Update the virtual command related registers
iommu: Allow enabling non-strict mode dynamically
iommu: Merge strictness and domain type configs
iommu: Only log strictness for DMA domains
iommu: Expose DMA domain strictness via sysfs
iommu: Express DMA strictness via the domain type
iommu/vt-d: Prepare for multiple DMA domain types
iommu/arm-smmu: Prepare for multiple DMA domain types
iommu/amd: Prepare for multiple DMA domain types
iommu: Introduce explicit type for non-strict DMA domains
...
Previously io-pgtable merely passed the iommu_iotlb_gather pointer
through to helpers, but now it has grown its own direct dereference.
This turns out to break the build for !IOMMU_API configs where the
structure only has a dummy definition. It will probably also crash
drivers who don't use the gather mechanism and simply pass in NULL.
Wrap this dereference in a suitable helper which can both be stubbed
out for !IOMMU_API and encapsulate a NULL check otherwise.
Fixes: 7a7c5badf8 ("iommu: Indicate queued flushes via gather data")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/83672ee76f6405c82845a55c148fa836f56fbbc1.1629465282.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Eliminate the iommu_get_dma_strict() indirection and pipe the
information through the domain type from the beginning. Besides
the flow simplification this also has several nice side-effects:
- Automatically implies strict mode for untrusted devices by
virtue of their IOMMU_DOMAIN_DMA override.
- Ensures that we only end up using flush queues for drivers
which are aware of them and can actually benefit.
- Allows us to handle flush queue init failure by falling back
to strict mode instead of leaving it to possibly blow up later.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/47083d69155577f1367877b1594921948c366eb3.1628682049.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Promote the difference between strict and non-strict DMA domains from an
internal detail to a distinct domain feature and type, to pave the road
for exposing it through the sysfs default domain interface.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/08cd2afaf6b63c58ad49acec3517c9b32c2bb946.1628682049.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since iommu_iotlb_gather exists to help drivers optimise flushing for a
given unmap request, it is also the logical place to indicate whether
the unmap is strict or not, and thus help them further optimise for
whether to expect a sync or a flush_all subsequently. As part of that,
it also seems fair to make the flush queue code take responsibility for
enforcing the really subtle ordering requirement it brings, so that we
don't need to worry about forgetting that if new drivers want to add
flush queue support, and can consolidate the existing versions.
While we're adding to the kerneldoc, also fill in some info for
@freelist which was overlooked previously.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/bf5f8e2ad84e48c712ccbf80fa8c610594c7595f.1628682049.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Now that everyone has converged on iommu-dma for IOMMU_DOMAIN_DMA
support, we can abandon the notion of drivers being responsible for the
cookie type, and consolidate all the management into the core code.
CC: Yong Wu <yong.wu@mediatek.com>
CC: Chunyan Zhang <chunyan.zhang@unisoc.com>
CC: Maxime Ripard <mripard@kernel.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/46a2c0e7419c7d1d931762dc7b6a69fa082d199a.1628682048.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Convert to ssize_t return code so the return code from __iommu_map()
can be returned all the way down through dma_iommu_map_sg().
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Refactor iommu_iotlb_gather_add_page() and factor out the logic that
detects whether IOTLB gather range and a new range are disjoint. To be
used by the next patch that implements different gathering logic for
AMD.
Note that updating gather->pgsize unconditionally does not affect
correctness as the function had (and has) an invariant, in which
gather->pgsize always represents the flushing granularity of its range.
Arguably, “size" should never be zero, but lets assume for the matter of
discussion that it might.
If "size" equals to "gather->pgsize", then the assignment in question
has no impact.
Otherwise, if "size" is non-zero, then iommu_iotlb_sync() would
initialize the size and range (see iommu_iotlb_gather_init()), and the
invariant is kept.
Otherwise, "size" is zero, and "gather" already holds a range, so
gather->pgsize is non-zero and (gather->pgsize && gather->pgsize !=
size) is true. Therefore, again, iommu_iotlb_sync() would be called and
initialize the size.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jiajun Cao <caojiajun@vmware.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Nadav Amit <namit@vmware.com>
Link: https://lore.kernel.org/r/20210723093209.714328-5-namit@vmware.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Mediatek driver is not the only one which might want a basic
address-based gathering behaviour, so although it's arguably simple
enough to open-code, let's factor it out for the sake of cleanliness.
Let's also take this opportunity to document the intent of these
helpers for clarity.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>
Cc: Jiajun Cao <caojiajun@vmware.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Nadav Amit <namit@vmware.com>
Link: https://lore.kernel.org/r/20210723093209.714328-4-namit@vmware.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
We only ever now set strict mode enabled in iommu_set_dma_strict(), so
just remove the argument.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1626088340-5838-7-git-send-email-john.garry@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add a callback for IOMMU drivers to provide a path for the
IOMMU framework to call into an IOMMU driver, which can
call into the io-pgtable code, to map a physically contiguous
rnage of pages of the same size.
For IOMMU drivers that do not specify a map_pages() callback,
the existing logic of mapping memory one page block at a time
will be used.
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Suggested-by: Will Deacon <will@kernel.org>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
Link: https://lore.kernel.org/r/1623850736-389584-5-git-send-email-quic_c_gdjako@quicinc.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add a callback for IOMMU drivers to provide a path for the
IOMMU framework to call into an IOMMU driver, which can call
into the io-pgtable code, to unmap a virtually contiguous
range of pages of the same size.
For IOMMU drivers that do not specify an unmap_pages() callback,
the existing logic of unmapping memory one page block at a time
will be used.
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
Link: https://lore.kernel.org/r/1623850736-389584-3-git-send-email-quic_c_gdjako@quicinc.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Rather than have separate opaque setter functions that are easy to
overlook and lead to repetitive boilerplate in drivers, let's pass the
relevant initialisation parameters directly to iommu_device_register().
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/ab001b87c533b6f4db71eb90db6f888953986c36.1617285386.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
It happens that the 3 drivers which first supported being modular are
also ones which play games with their pgsize_bitmap, so have non-const
iommu_ops where dynamically setting the owner manages to work out OK.
However, it's less than ideal to force that upon all drivers which want
to be modular - like the new sprd-iommu driver which now has a potential
bug in that regard - so let's just statically set the module owner and
let ops remain const wherever possible.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/31423b99ff609c3d4b291c701a7a7a810d9ce8dc.1617285386.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use an explicit set_pgtable_quirks method instead that just passes
the actual quirk bitmask instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-20-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Instead make the global iommu_dma_strict paramete in iommu.c canonical by
exporting helpers to get and set it and use those directly in the drivers.
This make sure that the iommu.strict parameter also works for the AMD and
Intel IOMMU drivers on x86. As those default to lazy flushing a new
IOMMU_CMD_LINE_STRICT is used to turn the value into a tristate to
represent the default if not overriden by an explicit parameter.
[ported on top of the other iommu_attr changes and added a few small
missing bits]
Signed-off-by: Robin Murphy <robin.murphy@arm.com>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210401155256.298656-19-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use an explicit enable_nesting method instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-17-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The geometry information can be trivially queried from the iommu_domain
struture.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-16-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
DOMAIN_ATTR_PAGING is never used.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-15-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Instead of a separate call to enable all devices from the list, just
enable the liodn once the device is attached to the iommu domain.
This also remove the DOMAIN_ATTR_FSL_PAMU_ENABLE iommu_attr.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-11-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add a fsl_pamu_configure_l1_stash API that qman_portal can call directly
instead of indirecting through the iommu attr API.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-8-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The only thing that fsl_pamu_window_enable does for the current caller
is to fill in the prot value in the only dma_window structure, and to
propagate a few values from the iommu_domain_geometry struture into the
dma_window. Remove the dma_window entirely, hardcode the prot value and
otherwise use the iommu_domain_geometry structure instead.
Remove the now unused ->domain_window_enable iommu method.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-7-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The only domains allocated forces use of a single window. Remove all
the code related to multiple window support, as well as the need for
qman_portal to force a single window.
Remove the now unused DOMAIN_ATTR_WINDOWS iommu_attr.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-6-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
None of the values returned by this function are ever queried. Also
remove the DOMAIN_ATTR_FSL_PAMUV1 enum value that is not otherwise used.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-3-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
domain_window_disable is wired up by fsl_pamu, but never actually called.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-2-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Some systems allow devices to handle I/O Page Faults in the core mm. For
example systems implementing the PCIe PRI extension or Arm SMMU stall
model. Infrastructure for reporting these recoverable page faults was
added to the IOMMU core by commit 0c830e6b32 ("iommu: Introduce device
fault report API"). Add a page fault handler for host SVA.
IOMMU driver can now instantiate several fault workqueues and link them
to IOPF-capable devices. Drivers can choose between a single global
workqueue, one per IOMMU device, one per low-level fault queue, one per
domain, etc.
When it receives a fault event, most commonly in an IRQ handler, the
IOMMU driver reports the fault using iommu_report_device_fault(), which
calls the registered handler. The page fault handler then calls the mm
fault handler, and reports either success or failure with
iommu_page_response(). After the handler succeeds, the hardware retries
the access.
The iopf_param pointer could be embedded into iommu_fault_param. But
putting iopf_param into the iommu_param structure allows us not to care
about ordering between calls to iopf_queue_add_device() and
iommu_register_device_fault_handler().
Tested-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20210401154718.307519-7-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Some devices manage I/O Page Faults (IOPF) themselves instead of relying
on PCIe PRI or Arm SMMU stall. Allow their drivers to enable SVA without
mandating IOMMU-managed IOPF. The other device drivers now need to first
enable IOMMU_DEV_FEAT_IOPF before enabling IOMMU_DEV_FEAT_SVA. Enabling
IOMMU_DEV_FEAT_IOPF on its own doesn't have any effect visible to the
device driver, it is used in combination with other features.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20210401154718.307519-4-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The pasid-num-bits property shouldn't need a dedicated fwspec field,
it's a job for device properties. Add properties for IORT, and access
the number of PASID bits using device_property_read_u32().
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/20210401154718.307519-3-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
After the change of patch ("iommu: Switch gather->end to the
inclusive end"), the performace drops from 1600+K IOPS to 1200K in our
kunpeng ARM64 platform.
We find that the range [start1, end1) actually is joint from the range
[end1, end2), but it is considered as disjoint after the change,
so it needs more times of TLB sync, and spends more time on it.
So fix the boundary issue to avoid performance drop.
Fixes: 862c3715de ("iommu: Switch gather->end to the inclusive end")
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/1616643504-120688-1-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Joerg Roedel
Jason Gunthorpe
Lu Baolu
Robin Murphy
Matthew Wilcox (Oracle)
Linus Torvalds
Logan Gunthorpe
Nadav Amit
John Garry
Isaac J. Manjarres
Christoph Hellwig
Jean-Philippe Brucker
Xiang Chen