Граф коммитов

62 Коммитов

Автор SHA1 Сообщение Дата
Quentin Monnet 93270357da bpftool: Do not check return value from libbpf_set_strict_mode()
The function always returns 0, so we don't need to check whether the
return value is 0 or not.

This change was first introduced in commit a777e18f1b ("bpftool: Use
libbpf 1.0 API mode instead of RLIMIT_MEMLOCK"), but later reverted to
restore the unconditional rlimit bump in bpftool. Let's re-add it.

Co-developed-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220610112648.29695-3-quentin@isovalent.com
2022-06-14 22:18:56 +02:00
Quentin Monnet 6b4384ff10 Revert "bpftool: Use libbpf 1.0 API mode instead of RLIMIT_MEMLOCK"
This reverts commit a777e18f1b.

In commit a777e18f1b ("bpftool: Use libbpf 1.0 API mode instead of
RLIMIT_MEMLOCK"), we removed the rlimit bump in bpftool, because the
kernel has switched to memcg-based memory accounting. Thanks to the
LIBBPF_STRICT_AUTO_RLIMIT_MEMLOCK, we attempted to keep compatibility
with other systems and ask libbpf to raise the limit for us if
necessary.

How do we know if memcg-based accounting is supported? There is a probe
in libbpf to check this. But this probe currently relies on the
availability of a given BPF helper, bpf_ktime_get_coarse_ns(), which
landed in the same kernel version as the memory accounting change. This
works in the generic case, but it may fail, for example, if the helper
function has been backported to an older kernel. This has been observed
for Google Cloud's Container-Optimized OS (COS), where the helper is
available but rlimit is still in use. The probe succeeds, the rlimit is
not raised, and probing features with bpftool, for example, fails.

A patch was submitted [0] to update this probe in libbpf, based on what
the cilium/ebpf Go library does [1]. It would lower the soft rlimit to
0, attempt to load a BPF object, and reset the rlimit. But it may induce
some hard-to-debug flakiness if another process starts, or the current
application is killed, while the rlimit is reduced, and the approach was
discarded.

As a workaround to ensure that the rlimit bump does not depend on the
availability of a given helper, we restore the unconditional rlimit bump
in bpftool for now.

  [0] https://lore.kernel.org/bpf/20220609143614.97837-1-quentin@isovalent.com/
  [1] https://github.com/cilium/ebpf/blob/v0.9.0/rlimit/rlimit.go#L39

Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Yafang Shao <laoar.shao@gmail.com>
Cc: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20220610112648.29695-2-quentin@isovalent.com
2022-06-14 22:18:06 +02:00
Yafang Shao a777e18f1b bpftool: Use libbpf 1.0 API mode instead of RLIMIT_MEMLOCK
We have switched to memcg-based memory accouting and thus the rlimit is
not needed any more. LIBBPF_STRICT_AUTO_RLIMIT_MEMLOCK was introduced in
libbpf for backward compatibility, so we can use it instead now.

libbpf_set_strict_mode always return 0, so we don't need to check whether
the return value is 0 or not.

Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220409125958.92629-4-laoar.shao@gmail.com
2022-04-10 20:17:16 -07:00
Quentin Monnet 9910a74d6e bpftool: Update versioning scheme, align on libbpf's version number
Since the notion of versions was introduced for bpftool, it has been
following the version number of the kernel (using the version number
corresponding to the tree in which bpftool's sources are located). The
rationale was that bpftool's features are loosely tied to BPF features
in the kernel, and that we could defer versioning to the kernel
repository itself.

But this versioning scheme is confusing today, because a bpftool binary
should be able to work with both older and newer kernels, even if some
of its recent features won't be available on older systems. Furthermore,
if bpftool is ported to other systems in the future, keeping a
Linux-based version number is not a good option.

Looking at other options, we could either have a totally independent
scheme for bpftool, or we could align it on libbpf's version number
(with an offset on the major version number, to avoid going backwards).
The latter comes with a few drawbacks:

- We may want bpftool releases in-between two libbpf versions. We can
  always append pre-release numbers to distinguish versions, although
  those won't look as "official" as something with a proper release
  number. But at the same time, having bpftool with version numbers that
  look "official" hasn't really been an issue so far.

- If no new feature lands in bpftool for some time, we may move from
  e.g. 6.7.0 to 6.8.0 when libbpf levels up and have two different
  versions which are in fact the same.

- Following libbpf's versioning scheme sounds better than kernel's, but
  ultimately it doesn't make too much sense either, because even though
  bpftool uses the lib a lot, its behaviour is not that much conditioned
  by the internal evolution of the library (or by new APIs that it may
  not use).

Having an independent versioning scheme solves the above, but at the
cost of heavier maintenance. Developers will likely forget to increase
the numbers when adding features or bug fixes, and we would take the
risk of having to send occasional "catch-up" patches just to update the
version number.

Based on these considerations, this patch aligns bpftool's version
number on libbpf's. This is not a perfect solution, but 1) it's
certainly an improvement over the current scheme, 2) the issues raised
above are all minor at the moment, and 3) we can still move to an
independent scheme in the future if we realise we need it.

Given that libbpf is currently at version 0.7.0, and bpftool, before
this patch, was at 5.16, we use an offset of 6 for the major version,
bumping bpftool to 6.7.0. Libbpf does not export its patch number;
leave bpftool's patch number at 0 for now.

It remains possible to manually override the version number by setting
BPFTOOL_VERSION when calling make.

Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220210104237.11649-3-quentin@isovalent.com
2022-02-10 21:09:47 -08:00
Quentin Monnet 61fce9693f bpftool: Add libbpf's version number to "bpftool version" output
To help users check what version of libbpf is being used with bpftool,
print the number along with bpftool's own version number.

Output:

    $ ./bpftool version
    ./bpftool v5.16.0
    using libbpf v0.7
    features: libbfd, libbpf_strict, skeletons

    $ ./bpftool version --json --pretty
    {
        "version": "5.16.0",
        "libbpf_version": "0.7",
        "features": {
            "libbfd": true,
            "libbpf_strict": true,
            "skeletons": true
        }
    }

Note that libbpf does not expose its patch number.

Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220210104237.11649-2-quentin@isovalent.com
2022-02-10 21:09:47 -08:00
Mauricio Vásquez da7af0aa20 bpftool: Fix strict mode calculation
"(__LIBBPF_STRICT_LAST - 1) & ~LIBBPF_STRICT_MAP_DEFINITIONS" is wrong
as it is equal to 0 (LIBBPF_STRICT_NONE). Let's use
"LIBBPF_STRICT_ALL & ~LIBBPF_STRICT_MAP_DEFINITIONS" now that the
previous commit makes it possible in libbpf.

Fixes: 93b8952d22 ("libbpf: deprecate legacy BPF map definitions")
Signed-off-by: Mauricio Vásquez <mauricio@kinvolk.io>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220207145052.124421-3-mauricio@kinvolk.io
2022-02-07 12:12:22 -08:00
Andrii Nakryiko 93b8952d22 libbpf: deprecate legacy BPF map definitions
Enact deprecation of legacy BPF map definition in SEC("maps") ([0]). For
the definitions themselves introduce LIBBPF_STRICT_MAP_DEFINITIONS flag
for libbpf strict mode. If it is set, error out on any struct
bpf_map_def-based map definition. If not set, libbpf will print out
a warning for each legacy BPF map to raise awareness that it goes away.

For any use of BPF_ANNOTATE_KV_PAIR() macro providing a legacy way to
associate BTF key/value type information with legacy BPF map definition,
warn through libbpf's pr_warn() error message (but don't fail BPF object
open).

BPF-side struct bpf_map_def is marked as deprecated. User-space struct
bpf_map_def has to be used internally in libbpf, so it is left
untouched. It should be enough for bpf_map__def() to be marked
deprecated to raise awareness that it goes away.

bpftool is an interesting case that utilizes libbpf to open BPF ELF
object to generate skeleton. As such, even though bpftool itself uses
full on strict libbpf mode (LIBBPF_STRICT_ALL), it has to relax it a bit
for BPF map definition handling to minimize unnecessary disruptions. So
opt-out of LIBBPF_STRICT_MAP_DEFINITIONS for bpftool. User's code that
will later use generated skeleton will make its own decision whether to
enforce LIBBPF_STRICT_MAP_DEFINITIONS or not.

There are few tests in selftests/bpf that are consciously using legacy
BPF map definitions to test libbpf functionality. For those, temporary
opt out of LIBBPF_STRICT_MAP_DEFINITIONS mode for the duration of those
tests.

  [0] Closes: https://github.com/libbpf/libbpf/issues/272

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220120060529.1890907-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-01-20 21:19:05 -08:00
Paul Chaignon 1a1a0b0364 bpftool: Enable line buffering for stdout
The output of bpftool prog tracelog is currently buffered, which is
inconvenient when piping the output into other commands. A simple
tracelog | grep will typically not display anything. This patch fixes it
by enabling line buffering on stdout for the whole bpftool binary.

Fixes: 30da46b5dc ("tools: bpftool: add a command to dump the trace pipe")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Paul Chaignon <paul@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211220214528.GA11706@Mem
2021-12-21 15:44:51 -08:00
Stanislav Fomichev e47d0bf800 bpftool: Add current libbpf_strict mode to version output
+ bpftool --legacy --version
bpftool v5.15.0
features: libbfd, skeletons
+ bpftool --version
bpftool v5.15.0
features: libbfd, libbpf_strict, skeletons

+ bpftool --legacy --help
Usage: bpftool [OPTIONS] OBJECT { COMMAND | help }
       bpftool batch file FILE
       bpftool version

       OBJECT := { prog | map | link | cgroup | perf | net | feature | btf | gen | struct_ops | iter }
       OPTIONS := { {-j|--json} [{-p|--pretty}] | {-d|--debug} | {-l|--legacy} |
                    {-V|--version} }
+ bpftool --help
Usage: bpftool [OPTIONS] OBJECT { COMMAND | help }
       bpftool batch file FILE
       bpftool version

       OBJECT := { prog | map | link | cgroup | perf | net | feature | btf | gen | struct_ops | iter }
       OPTIONS := { {-j|--json} [{-p|--pretty}] | {-d|--debug} | {-l|--legacy} |
                    {-V|--version} }

+ bpftool --legacy
Usage: bpftool [OPTIONS] OBJECT { COMMAND | help }
       bpftool batch file FILE
       bpftool version

       OBJECT := { prog | map | link | cgroup | perf | net | feature | btf | gen | struct_ops | iter }
       OPTIONS := { {-j|--json} [{-p|--pretty}] | {-d|--debug} | {-l|--legacy} |
                    {-V|--version} }
+ bpftool
Usage: bpftool [OPTIONS] OBJECT { COMMAND | help }
       bpftool batch file FILE
       bpftool version

       OBJECT := { prog | map | link | cgroup | perf | net | feature | btf | gen | struct_ops | iter }
       OPTIONS := { {-j|--json} [{-p|--pretty}] | {-d|--debug} | {-l|--legacy} |
                    {-V|--version} }

+ bpftool --legacy version
bpftool v5.15.0
features: libbfd, skeletons
+ bpftool version
bpftool v5.15.0
features: libbfd, libbpf_strict, skeletons

+ bpftool --json --legacy version
{"version":"5.15.0","features":{"libbfd":true,"libbpf_strict":false,"skeletons":true}}
+ bpftool --json version
{"version":"5.15.0","features":{"libbfd":true,"libbpf_strict":true,"skeletons":true}}

Suggested-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20211116000448.2918854-1-sdf@google.com
2021-11-16 10:32:50 +01:00
Stanislav Fomichev 314f14abde bpftool: Enable libbpf's strict mode by default
Otherwise, attaching with bpftool doesn't work with strict section names.

Also:

  - Add --legacy option to switch back to pre-1.0 behavior
  - Print a warning when program fails to load in strict mode to
    point to --legacy flag
  - By default, don't append / to the section name; in strict
    mode it's relevant only for a small subset of prog types

+ bpftool --legacy prog loadall tools/testing/selftests/bpf/test_cgroup_link.o /sys/fs/bpf/kprobe type kprobe
libbpf: failed to pin program: File exists
Error: failed to pin all programs
+ bpftool prog loadall tools/testing/selftests/bpf/test_cgroup_link.o /sys/fs/bpf/kprobe type kprobe

v1 -> v2:
  - strict by default (Quentin Monnet)
  - add more info to --legacy description (Quentin Monnet)
  - add bash completion (Quentin Monnet)

Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20211110192324.920934-1-sdf@google.com
2021-11-12 16:54:58 +01:00
Quentin Monnet d6699f8e0f bpftool: Switch to libbpf's hashmap for PIDs/names references
In order to show PIDs and names for processes holding references to BPF
programs, maps, links, or BTF objects, bpftool creates hash maps to
store all relevant information. This commit is part of a set that
transitions from the kernel's hash map implementation to the one coming
with libbpf.

The motivation is to make bpftool less dependent of kernel headers, to
ease the path to a potential out-of-tree mirror, like libbpf has.

This is the third and final step of the transition, in which we convert
the hash maps used for storing the information about the processes
holding references to BPF objects (programs, maps, links, BTF), and at
last we drop the inclusion of tools/include/linux/hashtable.h.

Note: Checkpatch complains about the use of __weak declarations, and the
missing empty lines after the bunch of empty function declarations when
compiling without the BPF skeletons (none of these were introduced in
this patch). We want to keep things as they are, and the reports should
be safe to ignore.

Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211023205154.6710-6-quentin@isovalent.com
2021-10-25 17:31:39 -07:00
Quentin Monnet 46241271d1 bpftool: Do not expose and init hash maps for pinned path in main.c
BPF programs, maps, and links, can all be listed with their pinned paths
by bpftool, when the "-f" option is provided. To do so, bpftool builds
hash maps containing all pinned paths for each kind of objects.

These three hash maps are always initialised in main.c, and exposed
through main.h. There appear to be no particular reason to do so: we can
just as well make them static to the files that need them (prog.c,
map.c, and link.c respectively), and initialise them only when we want
to show objects and the "-f" switch is provided.

This may prevent unnecessary memory allocations if the implementation of
the hash maps was to change in the future.

Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211023205154.6710-3-quentin@isovalent.com
2021-10-25 17:31:38 -07:00
Quentin Monnet c07ba629df tools: bpftool: Update and synchronise option list in doc and help msg
All bpftool commands support the options for JSON output and debug from
libbpf. In addition, some commands support additional options
corresponding to specific use cases.

The list of options described in the man pages for the different
commands are not always accurate. The messages for interactive help are
mostly limited to HELP_SPEC_OPTIONS, and are even less representative of
the actual set of options supported for the commands.

Let's update the lists:

- HELP_SPEC_OPTIONS is modified to contain the "default" options (JSON
  and debug), and to be extensible (no ending curly bracket).
- All commands use HELP_SPEC_OPTIONS in their help message, and then
  complete the list with their specific options.
- The lists of options in the man pages are updated.
- The formatting of the list for bpftool.rst is adjusted to match
  formatting for the other man pages. This is for consistency, and also
  because it will be helpful in a future patch to automatically check
  that the files are synchronised.

Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210730215435.7095-5-quentin@isovalent.com
2021-07-30 15:40:27 -07:00
Zhihao Cheng ca16b429f3 tools/bpftool: Fix error return code in do_batch()
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: 668da745af ("tools: bpftool: add support for quotations ...")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20210609115916.2186872-1-chengzhihao1@huawei.com
2021-06-11 15:31:09 -07:00
Alexei Starovoitov d510296d33 bpftool: Use syscall/loader program in "prog load" and "gen skeleton" command.
Add -L flag to bpftool to use libbpf gen_trace facility and syscall/loader program
for skeleton generation and program loading.

"bpftool gen skeleton -L" command will generate a "light skeleton" or "loader skeleton"
that is similar to existing skeleton, but has one major difference:
$ bpftool gen skeleton lsm.o > lsm.skel.h
$ bpftool gen skeleton -L lsm.o > lsm.lskel.h
$ diff lsm.skel.h lsm.lskel.h
@@ -5,34 +4,34 @@
 #define __LSM_SKEL_H__

 #include <stdlib.h>
-#include <bpf/libbpf.h>
+#include <bpf/bpf.h>

The light skeleton does not use majority of libbpf infrastructure.
It doesn't need libelf. It doesn't parse .o file.
It only needs few sys_bpf wrappers. All of them are in bpf/bpf.h file.
In future libbpf/bpf.c can be inlined into bpf.h, so not even libbpf.a would be
needed to work with light skeleton.

"bpftool prog load -L file.o" command is introduced for debugging of syscall/loader
program generation. Just like the same command without -L it will try to load
the programs from file.o into the kernel. It won't even try to pin them.

"bpftool prog load -L -d file.o" command will provide additional debug messages
on how syscall/loader program was generated.
Also the execution of syscall/loader program will use bpf_trace_printk() for
each step of loading BTF, creating maps, and loading programs.
The user can do "cat /.../trace_pipe" for further debug.

An example of fexit_sleep.lskel.h generated from progs/fexit_sleep.c:
struct fexit_sleep {
	struct bpf_loader_ctx ctx;
	struct {
		struct bpf_map_desc bss;
	} maps;
	struct {
		struct bpf_prog_desc nanosleep_fentry;
		struct bpf_prog_desc nanosleep_fexit;
	} progs;
	struct {
		int nanosleep_fentry_fd;
		int nanosleep_fexit_fd;
	} links;
	struct fexit_sleep__bss {
		int pid;
		int fentry_cnt;
		int fexit_cnt;
	} *bss;
};

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-18-alexei.starovoitov@gmail.com
2021-05-19 00:41:31 +02:00
Andrii Nakryiko 4bbb358368 bpftool: Fix maybe-uninitialized warnings
Somehow when bpftool is compiled in -Og mode, compiler produces new warnings
about possibly uninitialized variables. Fix all the reported problems.

Fixes: 2119f2189d ("bpftool: add C output format option to btf dump subcommand")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210313210920.1959628-3-andrii@kernel.org
2021-03-16 12:26:49 -07:00
Andrii Nakryiko 75fa177769 tools/bpftool: Add bpftool support for split BTF
Add ability to work with split BTF by providing extra -B flag, which allows to
specify the path to the base BTF file.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201105043402.2530976-12-andrii@kernel.org
2020-11-05 18:37:31 -08:00
Quentin Monnet 82b8cf0acc tools: bpftool: Print optional built-in features along with version
Bpftool has a number of features that can be included or left aside
during compilation. This includes:

- Support for libbfd, providing the disassembler for JIT-compiled
  programs.
- Support for BPF skeletons, used for profiling programs or iterating on
  the PIDs of processes associated with BPF objects.

In order to make it easy for users to understand what features were
compiled for a given bpftool binary, print the status of the two
features above when showing the version number for bpftool ("bpftool -V"
or "bpftool version"). Document this in the main manual page. Example
invocations:

    $ bpftool version
    ./bpftool v5.9.0-rc1
    features: libbfd, skeletons

    $ bpftool -p version
    {
        "version": "5.9.0-rc1",
        "features": {
            "libbfd": true,
            "skeletons": true
        }
    }

Some other parameters are optional at compilation
("DISASM_FOUR_ARGS_SIGNATURE", LIBCAP support) but they do not impact
significantly bpftool's behaviour from a user's point of view, so their
status is not reported.

Available commands and supported program types depend on the version
number, and are therefore not reported either. Note that they are
already available, albeit without JSON, via bpftool's help messages.

v3:
- Use a simple list instead of boolean values for plain output.

v2:
- Fix JSON (object instead or array for the features).

Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200909162500.17010-2-quentin@isovalent.com
2020-09-10 11:16:46 -07:00
Andrii Nakryiko d53dee3fe0 tools/bpftool: Show info for processes holding BPF map/prog/link/btf FDs
Add bpf_iter-based way to find all the processes that hold open FDs against
BPF object (map, prog, link, btf). bpftool always attempts to discover this,
but will silently give up if kernel doesn't yet support bpf_iter BPF programs.
Process name and PID are emitted for each process (task group).

Sample output for each of 4 BPF objects:

$ sudo ./bpftool prog show
2694: cgroup_device  tag 8c42dee26e8cd4c2  gpl
        loaded_at 2020-06-16T15:34:32-0700  uid 0
        xlated 648B  jited 409B  memlock 4096B
        pids systemd(1)
2907: cgroup_skb  name egress  tag 9ad187367cf2b9e8  gpl
        loaded_at 2020-06-16T18:06:54-0700  uid 0
        xlated 48B  jited 59B  memlock 4096B  map_ids 2436
        btf_id 1202
        pids test_progs(2238417), test_progs(2238445)

$ sudo ./bpftool map show
2436: array  name test_cgr.bss  flags 0x400
        key 4B  value 8B  max_entries 1  memlock 8192B
        btf_id 1202
        pids test_progs(2238417), test_progs(2238445)
2445: array  name pid_iter.rodata  flags 0x480
        key 4B  value 4B  max_entries 1  memlock 8192B
        btf_id 1214  frozen
        pids bpftool(2239612)

$ sudo ./bpftool link show
61: cgroup  prog 2908
        cgroup_id 375301  attach_type egress
        pids test_progs(2238417), test_progs(2238445)
62: cgroup  prog 2908
        cgroup_id 375344  attach_type egress
        pids test_progs(2238417), test_progs(2238445)

$ sudo ./bpftool btf show
1202: size 1527B  prog_ids 2908,2907  map_ids 2436
        pids test_progs(2238417), test_progs(2238445)
1242: size 34684B
        pids bpftool(2258892)

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200619231703.738941-9-andriin@fb.com
2020-06-22 17:01:49 -07:00
Andrii Nakryiko 16e9b187ab tools/bpftool: Minimize bootstrap bpftool
Build minimal "bootstrap mode" bpftool to enable skeleton (and, later,
vmlinux.h generation), instead of building almost complete, but slightly
different (w/o skeletons, etc) bpftool to bootstrap complete bpftool build.

Current approach doesn't scale well (engineering-wise) when adding more BPF
programs to bpftool and other complicated functionality, as it requires
constant adjusting of the code to work in both bootstrapped mode and normal
mode.

So it's better to build only minimal bpftool version that supports only BPF
skeleton code generation and BTF-to-C conversion. Thankfully, this is quite
easy to accomplish due to internal modularity of bpftool commands. This will
also allow to keep adding new functionality to bpftool in general, without the
need to care about bootstrap mode for those new parts of bpftool.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200619231703.738941-6-andriin@fb.com
2020-06-22 17:01:48 -07:00
Yonghong Song 9406b485de tools/bpftool: Add bpf_iter support for bptool
Currently, only one command is supported
  bpftool iter pin <bpf_prog.o> <path>

It will pin the trace/iter bpf program in
the object file <bpf_prog.o> to the <path>
where <path> should be on a bpffs mount.

For example,
  $ bpftool iter pin ./bpf_iter_ipv6_route.o \
    /sys/fs/bpf/my_route
User can then do a `cat` to print out the results:
  $ cat /sys/fs/bpf/my_route
    fe800000000000000000000000000000 40 00000000000000000000000000000000 ...
    00000000000000000000000000000000 00 00000000000000000000000000000000 ...
    00000000000000000000000000000001 80 00000000000000000000000000000000 ...
    fe800000000000008c0162fffebdfd57 80 00000000000000000000000000000000 ...
    ff000000000000000000000000000000 08 00000000000000000000000000000000 ...
    00000000000000000000000000000000 00 00000000000000000000000000000000 ...

The implementation for ipv6_route iterator is in one of subsequent
patches.

This patch also added BPF_LINK_TYPE_ITER to link query.

In the future, we may add additional parameters to pin command
by parameterizing the bpf iterator. For example, a map_id or pid
may be added to let bpf program only traverses a single map or task,
similar to kernel seq_file single_open().

We may also add introspection command for targets/iterators by
leveraging the bpf_iter itself.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200509175920.2477247-1-yhs@fb.com
2020-05-09 17:05:27 -07:00
Andrii Nakryiko c5481f9a95 bpftool: Add bpf_link show and pin support
Add `bpftool link show` and `bpftool link pin` commands.

Example plain output for `link show` (with showing pinned paths):

[vmuser@archvm bpf]$ sudo ~/local/linux/tools/bpf/bpftool/bpftool -f link
1: tracing  prog 12
        prog_type tracing  attach_type fentry
        pinned /sys/fs/bpf/my_test_link
        pinned /sys/fs/bpf/my_test_link2
2: tracing  prog 13
        prog_type tracing  attach_type fentry
3: tracing  prog 14
        prog_type tracing  attach_type fentry
4: tracing  prog 15
        prog_type tracing  attach_type fentry
5: tracing  prog 16
        prog_type tracing  attach_type fentry
6: tracing  prog 17
        prog_type tracing  attach_type fentry
7: raw_tracepoint  prog 21
        tp 'sys_enter'
8: cgroup  prog 25
        cgroup_id 584  attach_type egress
9: cgroup  prog 25
        cgroup_id 599  attach_type egress
10: cgroup  prog 25
        cgroup_id 614  attach_type egress
11: cgroup  prog 25
        cgroup_id 629  attach_type egress

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200429001614.1544-9-andriin@fb.com
2020-04-28 17:27:08 -07:00
Martin KaFai Lau 65c9362859 bpftool: Add struct_ops support
This patch adds struct_ops support to the bpftool.

To recap a bit on the recent bpf_struct_ops feature on the kernel side:
It currently supports "struct tcp_congestion_ops" to be implemented
in bpf.  At a high level, bpf_struct_ops is struct_ops map populated
with a number of bpf progs.  bpf_struct_ops currently supports the
"struct tcp_congestion_ops".  However, the bpf_struct_ops design is
generic enough that other kernel struct ops can be supported in
the future.

Although struct_ops is map+progs at a high lever, there are differences
in details.  For example,
1) After registering a struct_ops, the struct_ops is held by the kernel
   subsystem (e.g. tcp-cc).  Thus, there is no need to pin a
   struct_ops map or its progs in order to keep them around.
2) To iterate all struct_ops in a system, it iterates all maps
   in type BPF_MAP_TYPE_STRUCT_OPS.  BPF_MAP_TYPE_STRUCT_OPS is
   the current usual filter.  In the future, it may need to
   filter by other struct_ops specific properties.  e.g. filter by
   tcp_congestion_ops or other kernel subsystem ops in the future.
3) struct_ops requires the running kernel having BTF info.  That allows
   more flexibility in handling other kernel structs.  e.g. it can
   always dump the latest bpf_map_info.
4) Also, "struct_ops" command is not intended to repeat all features
   already provided by "map" or "prog".  For example, if there really
   is a need to pin the struct_ops map, the user can use the "map" cmd
   to do that.

While the first attempt was to reuse parts from map/prog.c,  it ended up
not a lot to share.  The only obvious item is the map_parse_fds() but
that still requires modifications to accommodate struct_ops map specific
filtering (for the immediate and the future needs).  Together with the
earlier mentioned differences, it is better to part away from map/prog.c.

The initial set of subcmds are, register, unregister, show, and dump.

For register, it registers all struct_ops maps that can be found in an
obj file.  Option can be added in the future to specify a particular
struct_ops map.  Also, the common bpf_tcp_cc is stateless (e.g.
bpf_cubic.c and bpf_dctcp.c).  The "reuse map" feature is not
implemented in this patch and it can be considered later also.

For other subcmds, please see the man doc for details.

A sample output of dump:
[root@arch-fb-vm1 bpf]# bpftool struct_ops dump name cubic
[{
        "bpf_map_info": {
            "type": 26,
            "id": 64,
            "key_size": 4,
            "value_size": 256,
            "max_entries": 1,
            "map_flags": 0,
            "name": "cubic",
            "ifindex": 0,
            "btf_vmlinux_value_type_id": 18452,
            "netns_dev": 0,
            "netns_ino": 0,
            "btf_id": 52,
            "btf_key_type_id": 0,
            "btf_value_type_id": 0
        }
    },{
        "bpf_struct_ops_tcp_congestion_ops": {
            "refcnt": {
                "refs": {
                    "counter": 1
                }
            },
            "state": "BPF_STRUCT_OPS_STATE_INUSE",
            "data": {
                "list": {
                    "next": 0,
                    "prev": 0
                },
                "key": 0,
                "flags": 0,
                "init": "void (struct sock *) bictcp_init/prog_id:138",
                "release": "void (struct sock *) 0",
                "ssthresh": "u32 (struct sock *) bictcp_recalc_ssthresh/prog_id:141",
                "cong_avoid": "void (struct sock *, u32, u32) bictcp_cong_avoid/prog_id:140",
                "set_state": "void (struct sock *, u8) bictcp_state/prog_id:142",
                "cwnd_event": "void (struct sock *, enum tcp_ca_event) bictcp_cwnd_event/prog_id:139",
                "in_ack_event": "void (struct sock *, u32) 0",
                "undo_cwnd": "u32 (struct sock *) tcp_reno_undo_cwnd/prog_id:144",
                "pkts_acked": "void (struct sock *, const struct ack_sample *) bictcp_acked/prog_id:143",
                "min_tso_segs": "u32 (struct sock *) 0",
                "sndbuf_expand": "u32 (struct sock *) 0",
                "cong_control": "void (struct sock *, const struct rate_sample *) 0",
                "get_info": "size_t (struct sock *, u32, int *, union tcp_cc_info *) 0",
                "name": "bpf_cubic",
                "owner": 0
            }
        }
    }
]

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200318171656.129650-1-kafai@fb.com
2020-03-20 15:51:35 +01:00
Quentin Monnet 6ae32b29c0 tools: bpftool: Restore message on failure to guess program type
In commit 4a3d6c6a6e ("libbpf: Reduce log level for custom section
names"), log level for messages for libbpf_attach_type_by_name() and
libbpf_prog_type_by_name() was downgraded from "info" to "debug". The
latter function, in particular, is used by bpftool when attempting to
load programs, and this change caused bpftool to exit with no hint or
error message when it fails to detect the type of the program to load
(unless "-d" option was provided).

To help users understand why bpftool fails to load the program, let's do
a second run of the function with log level in "debug" mode in case of
failure.

Before:

    # bpftool prog load sample_ret0.o /sys/fs/bpf/sample_ret0
    # echo $?
    255

Or really verbose with -d flag:

    # bpftool -d prog load sample_ret0.o /sys/fs/bpf/sample_ret0
    libbpf: loading sample_ret0.o
    libbpf: section(1) .strtab, size 134, link 0, flags 0, type=3
    libbpf: skip section(1) .strtab
    libbpf: section(2) .text, size 16, link 0, flags 6, type=1
    libbpf: found program .text
    libbpf: section(3) .debug_abbrev, size 55, link 0, flags 0, type=1
    libbpf: skip section(3) .debug_abbrev
    libbpf: section(4) .debug_info, size 75, link 0, flags 0, type=1
    libbpf: skip section(4) .debug_info
    libbpf: section(5) .rel.debug_info, size 32, link 14, flags 0, type=9
    libbpf: skip relo .rel.debug_info(5) for section(4)
    libbpf: section(6) .debug_str, size 150, link 0, flags 30, type=1
    libbpf: skip section(6) .debug_str
    libbpf: section(7) .BTF, size 155, link 0, flags 0, type=1
    libbpf: section(8) .BTF.ext, size 80, link 0, flags 0, type=1
    libbpf: section(9) .rel.BTF.ext, size 32, link 14, flags 0, type=9
    libbpf: skip relo .rel.BTF.ext(9) for section(8)
    libbpf: section(10) .debug_frame, size 40, link 0, flags 0, type=1
    libbpf: skip section(10) .debug_frame
    libbpf: section(11) .rel.debug_frame, size 16, link 14, flags 0, type=9
    libbpf: skip relo .rel.debug_frame(11) for section(10)
    libbpf: section(12) .debug_line, size 74, link 0, flags 0, type=1
    libbpf: skip section(12) .debug_line
    libbpf: section(13) .rel.debug_line, size 16, link 14, flags 0, type=9
    libbpf: skip relo .rel.debug_line(13) for section(12)
    libbpf: section(14) .symtab, size 96, link 1, flags 0, type=2
    libbpf: looking for externs among 4 symbols...
    libbpf: collected 0 externs total
    libbpf: failed to guess program type from ELF section '.text'
    libbpf: supported section(type) names are: socket sk_reuseport kprobe/ [...]

After:

    # bpftool prog load sample_ret0.o /sys/fs/bpf/sample_ret0
    libbpf: failed to guess program type from ELF section '.text'
    libbpf: supported section(type) names are: socket sk_reuseport kprobe/ [...]

Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200311021205.9755-1-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2020-03-13 12:49:51 -07:00
Toke Høiland-Jørgensen 229c3b47b7 bpftool: Use consistent include paths for libbpf
Fix bpftool to include libbpf header files with the bpf/ prefix, to be
consistent with external users of the library. Also ensure that all
includes of exported libbpf header files (those that are exported on 'make
install' of the library) use bracketed includes instead of quoted.

To make sure no new files are introduced that doesn't include the bpf/
prefix in its include, remove tools/lib/bpf from the include path entirely,
and use tools/lib instead.

Fixes: 6910d7d386 ("selftests/bpf: Ensure bpf_helper_defs.h are taken from selftests dir")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157952560684.1683545.4765181397974997027.stgit@toke.dk
2020-01-20 16:37:45 -08:00
Andrii Nakryiko 985ead416d bpftool: Add skeleton codegen command
Add `bpftool gen skeleton` command, which takes in compiled BPF .o object file
and dumps a BPF skeleton struct and related code to work with that skeleton.
Skeleton itself is tailored to a specific structure of provided BPF object
file, containing accessors (just plain struct fields) for every map and
program, as well as dedicated space for bpf_links. If BPF program is using
global variables, corresponding structure definitions of compatible memory
layout are emitted as well, making it possible to initialize and subsequently
read/update global variables values using simple and clear C syntax for
accessing fields. This skeleton majorly improves usability of
opening/loading/attaching of BPF object, as well as interacting with it
throughout the lifetime of loaded BPF object.

Generated skeleton struct has the following structure:

struct <object-name> {
	/* used by libbpf's skeleton API */
	struct bpf_object_skeleton *skeleton;
	/* bpf_object for libbpf APIs */
	struct bpf_object *obj;
	struct {
		/* for every defined map in BPF object: */
		struct bpf_map *<map-name>;
	} maps;
	struct {
		/* for every program in BPF object: */
		struct bpf_program *<program-name>;
	} progs;
	struct {
		/* for every program in BPF object: */
		struct bpf_link *<program-name>;
	} links;
	/* for every present global data section: */
	struct <object-name>__<one of bss, data, or rodata> {
		/* memory layout of corresponding data section,
		 * with every defined variable represented as a struct field
		 * with exactly the same type, but without const/volatile
		 * modifiers, e.g.:
		 */
		 int *my_var_1;
		 ...
	} *<one of bss, data, or rodata>;
};

This provides great usability improvements:
- no need to look up maps and programs by name, instead just
  my_obj->maps.my_map or my_obj->progs.my_prog would give necessary
  bpf_map/bpf_program pointers, which user can pass to existing libbpf APIs;
- pre-defined places for bpf_links, which will be automatically populated for
  program types that libbpf knows how to attach automatically (currently
  tracepoints, kprobe/kretprobe, raw tracepoint and tracing programs). On
  tearing down skeleton, all active bpf_links will be destroyed (meaning BPF
  programs will be detached, if they are attached). For cases in which libbpf
  doesn't know how to auto-attach BPF program, user can manually create link
  after loading skeleton and they will be auto-detached on skeleton
  destruction:

	my_obj->links.my_fancy_prog = bpf_program__attach_cgroup_whatever(
		my_obj->progs.my_fancy_prog, <whatever extra param);

- it's extremely easy and convenient to work with global data from userspace
  now. Both for read-only and read/write variables, it's possible to
  pre-initialize them before skeleton is loaded:

	skel = my_obj__open(raw_embed_data);
	my_obj->rodata->my_var = 123;
	my_obj__load(skel); /* 123 will be initialization value for my_var */

  After load, if kernel supports mmap() for BPF arrays, user can still read
  (and write for .bss and .data) variables values, but at that point it will
  be directly mmap()-ed to BPF array, backing global variables. This allows to
  seamlessly exchange data with BPF side. From userspace program's POV, all
  the pointers and memory contents stay the same, but mapped kernel memory
  changes to point to created map.
  If kernel doesn't yet support mmap() for BPF arrays, it's still possible to
  use those data section structs to pre-initialize .bss, .data, and .rodata,
  but after load their pointers will be reset to NULL, allowing user code to
  gracefully handle this condition, if necessary.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191214014341.3442258-14-andriin@fb.com
2019-12-15 15:58:05 -08:00
Andrii Nakryiko 32e3e58e4c bpftool: Fix bpftool build by switching to bpf_object__open_file()
As part of libbpf in 5e61f27070 ("libbpf: stop enforcing kern_version,
populate it for users") non-LIBBPF_API __bpf_object__open_xattr() API
was removed from libbpf.h header. This broke bpftool, which relied on
that function. This patch fixes the build by switching to newly added
bpf_object__open_file() which provides the same capabilities, but is
official and future-proof API.

v1->v2:
- fix prog_type shadowing (Stanislav).

Fixes: 5e61f27070 ("libbpf: stop enforcing kern_version, populate it for users")
Reported-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20191007225604.2006146-1-andriin@fb.com
2019-10-07 18:44:28 -07:00
Quentin Monnet b0ead6d75a tools: bpftool: fix format string for p_err() in detect_common_prefix()
There is one call to the p_err() function in detect_common_prefix()
where the message to print is passed directly as the first argument,
without using a format string. This is harmless, but may trigger
warnings if the "__printf()" attribute is used correctly for the p_err()
function. Let's fix it by using a "%s" format string.

Fixes: ba95c74524 ("tools: bpftool: add "prog run" subcommand to test-run programs")
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-08-15 22:06:46 -07:00
Quentin Monnet ba95c74524 tools: bpftool: add "prog run" subcommand to test-run programs
Add a new "bpftool prog run" subcommand to run a loaded program on input
data (and possibly with input context) passed by the user.

Print output data (and output context if relevant) into a file or into
the console. Print return value and duration for the test run into the
console.

A "repeat" argument can be passed to run the program several times in a
row.

The command does not perform any kind of verification based on program
type (Is this program type allowed to use an input context?) or on data
consistency (Can I work with empty input data?), this is left to the
kernel.

Example invocation:

    # perl -e 'print "\x0" x 14' | ./bpftool prog run \
            pinned /sys/fs/bpf/sample_ret0 \
            data_in - data_out - repeat 5
    0000000 0000 0000 0000 0000 0000 0000 0000      | ........ ......
    Return value: 0, duration (average): 260ns

When one of data_in or ctx_in is "-", bpftool reads from standard input,
in binary format. Other formats (JSON, hexdump) might be supported (via
an optional command line keyword like "data_fmt_in") in the future if
relevant, but this would require doing more parsing in bpftool.

v2:
- Fix argument names for function check_single_stdin(). (Yonghong)

Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-05 23:48:07 +02:00
Quentin Monnet 55d778076b tools: bpftool: make -d option print debug output from verifier
The "-d" option is used to require all logs available for bpftool. So
far it meant telling libbpf to print even debug-level information. But
there is another source of info that can be made more verbose: when we
attemt to load programs with bpftool, we can pass a log_level parameter
to the verifier in order to control the amount of information that is
printed to the console.

Reuse the "-d" option to print all information the verifier can tell. At
this time, this means logs related to BPF_LOG_LEVEL1, BPF_LOG_LEVEL2 and
BPF_LOG_STATS. As mentioned in the discussion on the first version of
this set, these macros are internal to the kernel
(include/linux/bpf_verifier.h) and are not meant to be part of the
stable user API, therefore we simply use the related constants to print
whatever we can at this time, without trying to tell users what is
log_level1 or what is statistics.

Verifier logs are only used when loading programs for now (In the
future: for loading BTF objects with bpftool? Although libbpf does not
currently offer to print verifier info at debug level if no error
occurred when loading BTF objects), so bpftool.rst and bpftool-prog.rst
are the only man pages to get the update.

v3:
- Add details on log level and BTF loading at the end of commit log.

v2:
- Remove the possibility to select the log levels to use (v1 offered a
  combination of "log_level1", "log_level2" and "stats").
- The macros from kernel header bpf_verifier.h are not used (and
  therefore not moved to UAPI header).
- In v1 this was a distinct option, but is now merged in the only "-d"
  switch to activate libbpf and verifier debug-level logs all at the
  same time.

Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-05-28 11:03:26 +02:00
Quentin Monnet 775bc8ada8 tools: bpftool: add -d option to get debug output from libbpf
libbpf has three levels of priority for output messages: warn, info,
debug. By default, debug output is not printed to the console.

Add a new "--debug" (short name: "-d") option to bpftool to print libbpf
logs for all three levels.

Internally, we simply use the function provided by libbpf to replace the
default printing function by one that prints logs regardless of their
level.

v2:
- Remove the possibility to select the log-levels to use (v1 offered a
  combination of "warn", "info" and "debug").
- Rename option and offer a short name: -d|--debug.
- Add option description to all bpftool manual pages (instead of
  bpftool-prog.rst only), as all commands use libbpf.

Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-05-28 11:02:21 +02:00
Andrii Nakryiko c93cc69004 bpftool: add ability to dump BTF types
Add new `btf dump` sub-command to bpftool. It allows to dump
human-readable low-level BTF types representation of BTF types. BTF can
be retrieved from few different sources:
  - from BTF object by ID;
  - from PROG, if it has associated BTF;
  - from MAP, if it has associated BTF data; it's possible to narrow
    down types to either key type, value type, both, or all BTF types;
  - from ELF file (.BTF section).

Output format mostly follows BPF verifier log format with few notable
exceptions:
  - all the type/field/param/etc names are enclosed in single quotes to
    allow easier grepping and to stand out a little bit more;
  - FUNC_PROTO output follows STRUCT/UNION/ENUM format of having one
    line per each argument; this is more uniform and allows easy
    grepping, as opposed to succinct, but inconvenient format that BPF
    verifier log is using.

Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-25 21:45:14 -07:00
Quentin Monnet 49eb7ab3b2 tools: bpftool: add basic probe capability, probe syscall availability
Add a new component and command for bpftool, in order to probe the
system to dump a set of eBPF-related parameters so that users can know
what features are available on the system.

Parameters are dumped in plain or JSON output (with -j/-p options).

The current patch introduces probing of one simple parameter:
availability of the bpf() system call. Later commits
will add other probes.

Sample output:

    # bpftool feature probe kernel
    Scanning system call availability...
    bpf() syscall is available

    # bpftool --json --pretty feature probe kernel
    {
        "syscall_config": {
            "have_bpf_syscall": true
        }
    }

The optional "kernel" keyword enforces probing of the current system,
which is the only possible behaviour at this stage. It can be safely
omitted.

The feature comes with the relevant man page, but bash completion will
come in a dedicated commit.

v3:
- Do not probe kernel version. Contrarily to what is written below for
  v2, we can have the kernel version retrieved in libbpf instead of
  bpftool (in the patch adding probing for program types).

v2:
- Remove C-style macros output from this patch.
- Even though kernel version is no longer needed for testing kprobes
  availability, note that we still collect it in this patch so that
  bpftool gets able to probe (in next patches) older kernels as well.

Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-01-22 22:15:40 -08:00
Quentin Monnet 33221307c3 tools: bpftool: add an option to prevent auto-mount of bpffs, tracefs
In order to make life easier for users, bpftool automatically attempts
to mount the BPF virtual file system, if it is not mounted already,
before trying to pin objects in it. Similarly, it attempts to mount
tracefs if necessary before trying to dump the trace pipe to the
console.

While mounting file systems on-the-fly can improve user experience, some
administrators might prefer to avoid that. Let's add an option to block
these mount attempts. Note that it does not prevent automatic mounting
of tracefs by debugfs for the "bpftool prog tracelog" command.

Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-18 14:47:17 +01:00
Jakub Kicinski 02ff58dcf7 tools: bpftool: replace Netronome boilerplate with SPDX license headers
Replace the repeated license text with SDPX identifiers.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Sean Young <sean@mess.org>
Acked-by: Jiri Benc <jbenc@redhat.com>
Acked-by: David Calavera <david.calavera@gmail.com>
Acked-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Joe Stringer <joe@wand.net.nz>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Acked-by: Petar Penkov <ppenkov@stanford.edu>
Acked-by: Sandipan Das <sandipan@linux.ibm.com>
Acked-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Taeung Song <treeze.taeung@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
CC: okash.khawaja@gmail.com
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-13 12:08:44 +01:00
Stanislav Fomichev 29a9c10e41 bpftool: make libbfd optional
Make it possible to build bpftool without libbfd. libbfd and libopcodes are
typically provided in dev/dbg packages (binutils-dev in debian) which we
usually don't have installed on the fleet machines and we'd like a way to have
bpftool version that works without installing any additional packages.
This excludes support for disassembling jit-ted code and prints an error if
the user tries to use these features.

Tested by:
cat > FEATURES_DUMP.bpftool <<EOF
feature-libbfd=0
feature-disassembler-four-args=1
feature-reallocarray=0
feature-libelf=1
feature-libelf-mmap=1
feature-bpf=1
EOF
FEATURES_DUMP=$PWD/FEATURES_DUMP.bpftool make
ldd bpftool | grep libbfd

Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-16 20:45:01 -08:00
Quentin Monnet 06ee9da6a8 tools: bpftool: print nb of cmds to stdout (not stderr) for batch mode
When batch mode is used and all commands succeeds, bpftool prints the
number of commands processed to stderr. There is no particular reason to
use stderr for this, we could as well use stdout. It would avoid getting
unnecessary output on stderr if the standard ouptut is redirected, for
example.

Reported-by: David Beckett <david.beckett@netronome.com>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-10-21 20:45:14 +02:00
John Fastabend c034a177d3 bpf: bpftool, add flag to allow non-compat map definitions
Multiple map definition structures exist and user may have non-zero
fields in their definition that are not recognized by bpftool and
libbpf. The normal behavior is to then fail loading the map. Although
this is a good default behavior users may still want to load the map
for debugging or other reasons. This patch adds a --mapcompat flag
that can be used to override the default behavior and allow loading
the map even when it has additional non-zero fields.

For now the only user is 'bpftool prog' we can switch over other
subcommands as needed. The library exposes an API that consumes
a flags field now but I kept the original API around also in case
users of the API don't want to expose this. The flags field is an
int in case we need more control over how the API call handles
errors/features/etc in the future.

Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-15 16:13:14 -07:00
Yonghong Song f6f3bac08f tools/bpf: bpftool: add net support
Add "bpftool net" support. Networking devices are enumerated
to dump device index/name associated with xdp progs.

For each networking device, tc classes and qdiscs are enumerated
in order to check their bpf filters.
In addition, root handle and clsact ingress/egress are also checked for
bpf filters.  Not all filter information is printed out. Only ifindex,
kind, filter name, prog_id and tag are printed out, which are good
enough to show attachment information. If the filter action
is a bpf action, its bpf program id, bpf name and tag will be
printed out as well.

For example,
  $ ./bpftool net
  xdp [
  ifindex 2 devname eth0 prog_id 198
  ]
  tc_filters [
  ifindex 2 kind qdisc_htb name prefix_matcher.o:[cls_prefix_matcher_htb]
            prog_id 111727 tag d08fe3b4319bc2fd act []
  ifindex 2 kind qdisc_clsact_ingress name fbflow_icmp
            prog_id 130246 tag 3f265c7f26db62c9 act []
  ifindex 2 kind qdisc_clsact_egress name prefix_matcher.o:[cls_prefix_matcher_clsact]
            prog_id 111726 tag 99a197826974c876
  ifindex 2 kind qdisc_clsact_egress name cls_fg_dscp
            prog_id 108619 tag dc4630674fd72dcc act []
  ifindex 2 kind qdisc_clsact_egress name fbflow_egress
            prog_id 130245 tag 72d2d830d6888d2c
  ]
  $ ./bpftool -jp net
  [{
        "xdp": [{
                "ifindex": 2,
                "devname": "eth0",
                "prog_id": 198
            }
        ],
        "tc_filters": [{
                "ifindex": 2,
                "kind": "qdisc_htb",
                "name": "prefix_matcher.o:[cls_prefix_matcher_htb]",
                "prog_id": 111727,
                "tag": "d08fe3b4319bc2fd",
                "act": []
            },{
                "ifindex": 2,
                "kind": "qdisc_clsact_ingress",
                "name": "fbflow_icmp",
                "prog_id": 130246,
                "tag": "3f265c7f26db62c9",
                "act": []
            },{
                "ifindex": 2,
                "kind": "qdisc_clsact_egress",
                "name": "prefix_matcher.o:[cls_prefix_matcher_clsact]",
                "prog_id": 111726,
                "tag": "99a197826974c876"
            },{
                "ifindex": 2,
                "kind": "qdisc_clsact_egress",
                "name": "cls_fg_dscp",
                "prog_id": 108619,
                "tag": "dc4630674fd72dcc",
                "act": []
            },{
                "ifindex": 2,
                "kind": "qdisc_clsact_egress",
                "name": "fbflow_egress",
                "prog_id": 130245,
                "tag": "72d2d830d6888d2c"
            }
        ]
    }
  ]

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-09-06 22:34:08 -07:00
Jakub Kicinski 71e07ddcdc tools: bpftool: drop unnecessary Author comments
Drop my author comments, those are from the early days of
bpftool and make little sense in tree, where we have quite
a few people contributing and git to attribute the work.

While at it bump some copyrights.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-01 01:01:50 +02:00
Yonghong Song b04df400c3 tools/bpftool: add perf subcommand
The new command "bpftool perf [show | list]" will traverse
all processes under /proc, and if any fd is associated
with a perf event, it will print out related perf event
information. Documentation is also added.

Below is an example to show the results using bcc commands.
Running the following 4 bcc commands:
  kprobe:     trace.py '__x64_sys_nanosleep'
  kretprobe:  trace.py 'r::__x64_sys_nanosleep'
  tracepoint: trace.py 't:syscalls:sys_enter_nanosleep'
  uprobe:     trace.py 'p:/home/yhs/a.out:main'

The bpftool command line and result:

  $ bpftool perf
  pid 21711  fd 5: prog_id 5  kprobe  func __x64_sys_write  offset 0
  pid 21765  fd 5: prog_id 7  kretprobe  func __x64_sys_nanosleep  offset 0
  pid 21767  fd 5: prog_id 8  tracepoint  sys_enter_nanosleep
  pid 21800  fd 5: prog_id 9  uprobe  filename /home/yhs/a.out  offset 1159

  $ bpftool -j perf
  [{"pid":21711,"fd":5,"prog_id":5,"fd_type":"kprobe","func":"__x64_sys_write","offset":0}, \
   {"pid":21765,"fd":5,"prog_id":7,"fd_type":"kretprobe","func":"__x64_sys_nanosleep","offset":0}, \
   {"pid":21767,"fd":5,"prog_id":8,"fd_type":"tracepoint","tracepoint":"sys_enter_nanosleep"}, \
   {"pid":21800,"fd":5,"prog_id":9,"fd_type":"uprobe","filename":"/home/yhs/a.out","offset":1159}]

  $ bpftool prog
  5: kprobe  name probe___x64_sys  tag e495a0c82f2c7a8d  gpl
	  loaded_at 2018-05-15T04:46:37-0700  uid 0
	  xlated 200B  not jited  memlock 4096B  map_ids 4
  7: kprobe  name probe___x64_sys  tag f2fdee479a503abf  gpl
	  loaded_at 2018-05-15T04:48:32-0700  uid 0
	  xlated 200B  not jited  memlock 4096B  map_ids 7
  8: tracepoint  name tracepoint__sys  tag 5390badef2395fcf  gpl
	  loaded_at 2018-05-15T04:48:48-0700  uid 0
	  xlated 200B  not jited  memlock 4096B  map_ids 8
  9: kprobe  name probe_main_1  tag 0a87bdc2e2953b6d  gpl
	  loaded_at 2018-05-15T04:49:52-0700  uid 0
	  xlated 200B  not jited  memlock 4096B  map_ids 9

  $ ps ax | grep "python ./trace.py"
  21711 pts/0    T      0:03 python ./trace.py __x64_sys_write
  21765 pts/0    S+     0:00 python ./trace.py r::__x64_sys_nanosleep
  21767 pts/2    S+     0:00 python ./trace.py t:syscalls:sys_enter_nanosleep
  21800 pts/3    S+     0:00 python ./trace.py p:/home/yhs/a.out:main
  22374 pts/1    S+     0:00 grep --color=auto python ./trace.py

Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-05-24 18:18:20 -07:00
Quentin Monnet 668da745af tools: bpftool: add support for quotations in batch files
Improve argument parsing from batch input files in order to support
arguments enclosed between single (') or double quotes ("). For example,
this command can now be parsed in batch mode:

    bpftool prog dump xlated id 1337 file "/tmp/my file with spaces"

The function responsible for parsing command arguments is copied from
its counterpart in lib/utils.c in iproute2 package.

Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-02 09:46:41 +01:00
Quentin Monnet 416656bbaa tools: bpftool: read from stdin when batch file name is "-"
Make bpftool read its command list from standard input when the name if
the input file is a single dash.

Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-02 09:46:41 +01:00
Quentin Monnet 65d538dde6 tools: bpftool: support continuation lines in batch files
Add support for continuation lines, such as in the following example:

    prog show
    prog dump xlated \
        id 1337 opcodes

This patch is based after the code for support for continuation lines
from file lib/utils.c from package iproute2.

"Lines" in error messages are renamed as "commands", as we count the
number of commands (but we ignore empty lines, comments, and do not add
continuation lines to the count).

Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-02 09:46:41 +01:00
Quentin Monnet 06cc7fe7c2 tools: bpftool: support comments in batch files
Replace '#' by '\0' in commands read from batch files in order to avoid
processing the remaining part of the line, thus allowing users to use
comments in the files.

Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-02 09:46:41 +01:00
Quentin Monnet 9be6d411b0 tools: bpftool: preserve JSON output on errors on batch file parsing
Before this patch, perror() function is used in some cases when bpftool
fails to parse its input file in batch mode. This function does not
integrate well with the rest of the output when JSON is used, so we
replace it by something that is compliant.

Most calls to perror() had already been replaced in a previous patch,
this one is a leftover.

Fixes: d319c8e101c5 ("tools: bpftool: preserve JSON output on errors on batch file parsing")
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-02-15 10:01:05 +01:00
Roman Gushchin 4bfe3bd3cc tools/bpftool: use version from the kernel source tree
Bpftool determines it's own version based on the kernel
version, which is picked from the linux/version.h header.

It's strange to use the version of the installed kernel
headers, and makes much more sense to use the version
of the actual source tree, where bpftool sources are.

Fix this by building kernelversion target and use
the resulting string as bpftool version.

Example:
before:

$ bpftool version
bpftool v4.14.6

after:
$ bpftool version
bpftool v4.15.0-rc3

$bpftool version --json
{"version":"4.15.0-rc3"}

Signed-off-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-30 01:07:36 +01:00
Roman Gushchin 5ccda64d38 bpftool: implement cgroup bpf operations
This patch adds basic cgroup bpf operations to bpftool:
cgroup list, attach and detach commands.

Usage is described in the corresponding man pages,
and examples are provided.

Syntax:
$ bpftool cgroup list CGROUP
$ bpftool cgroup attach CGROUP ATTACH_TYPE PROG [ATTACH_FLAGS]
$ bpftool cgroup detach CGROUP ATTACH_TYPE PROG

Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-14 13:37:13 +01:00
Quentin Monnet 146882a37d tools: bpftool: make error message from getopt_long() JSON-friendly
If `getopt_long()` meets an unknown option, it prints its own error
message to standard error output. While this does not strictly break
JSON output, it is the only case bpftool prints something to standard
error output if JSON output is required. All other errors are printed on
standard output as JSON objects, so that an external program does not
have to parse stderr.

This is changed by setting the global variable `opterr` to 0.
Furthermore, p_err() is used to reproduce the error message in a more
JSON-friendly way, so that users still get to know what the erroneous
option is.

Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-11-30 02:09:29 +01:00
Quentin Monnet 7868620a3c tools: bpftool: clean up the JSON writer before exiting in usage()
The writer is cleaned at the end of the main function, but not if the
program exits sooner in usage(). Let's keep it clean and destroy the
writer before exiting.

Destruction and actual call to exit() are moved to another function so
that clean exit can also be performed without printing usage() hints.

Fixes: d35efba99d ("tools: bpftool: introduce --json and --pretty options")
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-11-30 02:09:29 +01:00