Vladimir Oltean says:
====================
Improvements to DSA core VLAN manipulation
In preparation of submitting the NXP SJA1105 driver, the Broadcom b53
and Mediatek mt7530 drivers have been found to apply some VLAN
workarounds that are needed in the new driver as well.
Therefore this patchset is mostly simply promoting the DSA driver
workarounds for VLAN to the generic code.
The b53 driver was applying a few workarounds in order to convince DSA
that its vlan_filtering setting is not really per-port. This is now
simply set by the driver via a DSA variable at probe time. The sja1105
driver will be a second user of this.
The mt7530 was also keeping track of when the .port_vlan_filtering
callback was being called. Remove the kept state from this driver
and simplify dealing with vlan_filtering in the generic case.
TODO:
Find the best way to deal generically with the situation described below
(discussion at https://lkml.org/lkml/2019/4/16/1355):
> > +Segregating the switch ports in multiple bridges is supported (e.g. 2 + 2), but
> > +all bridges should have the same level of VLAN awareness (either both have
> > +``vlan_filtering`` 0, or both 1). Also an inevitable limitation of the fact
> > +that VLAN awareness is global at the switch level is that once a bridge with
> > +``vlan_filtering`` enslaves at least one switch port, the other un-bridged
> > +ports are no longer available for standalone traffic termination.
>
> That is quite a limitation that I don't think I had fully grasped until
> reading your different patches. Since enslaving ports into a bridge
> comes after the network device was already made available for use, maybe
> you should force the carrier down or something along those lines as soon
> as a port is enslaved into a bridge with vlan_filtering=1 to make this
> more predictable for the user?
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This hides the need to perform a two-phase transaction and construct a
switchdev_obj_port_vlan struct.
Call graph (including a function that will be introduced in a follow-up
patch) looks like this now (same for the *_vlan_del function):
dsa_slave_vlan_rx_add_vid dsa_port_setup_8021q_tagging
| |
| |
| +-------------+
| |
v v
dsa_port_vid_add dsa_slave_port_obj_add
| |
+-------+ +-------+
| |
v v
dsa_port_vlan_add
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While possible (and safe) to use the newly introduced
dsa_port_is_vlan_filtering helper, fabricating a dsa_port pointer is a
bit awkward, so simply retrieve this from the dsa_switch structure.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since DSA has recently learned to treat better with drivers that set
vlan_filtering_is_global, doing this is no longer required.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Even if VLAN filtering is global, DSA will call this callback once per
each port. Drivers should not have to compare the global state with the
requested change. So let DSA do it.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
This was recently introduced, so keeping state inside the driver is no
longer necessary.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since different types of hardware may or may not support this setting
per-port, DSA keeps it either in dsa_switch or in dsa_port.
While drivers may know the characteristics of their hardware and
retrieve it from the correct place without the need of helpers, it is
cumbersone to find out an unambigous answer from generic DSA code.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current behavior is not as obvious as one would assume (which is
that, if the driver set vlan_filtering_is_global = 1, then checking any
dp->vlan_filtering would yield the same result). Only the ports which
are actively enslaved into a bridge would have vlan_filtering set.
This makes it tricky for drivers to check what the global state is.
So fix this and make the struct dsa_switch hold this global setting.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver, recognizing that the .port_vlan_filtering callback was never
coming after the port left its parent bridge, decided to take that duty
in its own hands. DSA now takes care of this condition, so fix that.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When ports are standalone (after they left the bridge), they should have
no VLAN filtering semantics (they should pass all traffic to the CPU).
Currently this is not true for switchdev drivers, because the bridge
"forgets" to unset that.
Normally one would think that doing this at the bridge layer would be a
better idea, i.e. call br_vlan_filter_toggle() from br_del_if(), similar
to how nbp_vlan_init() is called from br_add_if().
However what complicates that approach, and makes this one preferable,
is the fact that for the bridge core, vlan_filtering is a per-bridge
setting, whereas for switchdev/DSA it is per-port. Also there are
switches where the setting is per the entire device, and unsetting
vlan_filtering one by one, for each leaving port, would not be possible
from the bridge core without a certain level of awareness. So do this in
DSA and let drivers be unaware of it.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The DSA core is now able to do this check prior to calling the
.port_vlan_filtering callback, so tell it that VLAN filtering is global
for this particular hardware.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Suggested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On some switches, the action of whether to parse VLAN frame headers and use
that information for ingress admission is configurable, but not per
port. Such is the case for the Broadcom BCM53xx and the NXP SJA1105
families, for example. In that case, DSA can prevent the bridge core
from trying to apply different VLAN filtering settings on net devices
that belong to the same switch.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Suggested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This allows drivers to query the VLAN setting imposed by the bridge
driver directly from DSA, instead of keeping their own state based on
the .port_vlan_filtering callback.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull fsnotify fix from Jan Kara:
"A fix of user trigerable NULL pointer dereference syzbot has recently
spotted.
The problem was introduced in this merge window so no CC stable is
needed"
* tag 'fsnotify_for_v5.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fsnotify: Fix NULL ptr deref in fanotify_get_fsid()
Revert commit c8b1917c89 ("ACPICA: Clear status of GPEs before
enabling them") that causes problems with Thunderbolt controllers
to occur if a dock device is connected at init time (the xhci_hcd
and thunderbolt modules crash which prevents peripherals connected
through them from working).
Commit c8b1917c89 effectively causes commit ecc1165b8b ("ACPICA:
Dispatch active GPEs at init time") to get undone, so the problem
addressed by commit ecc1165b8b appears again as a result of it.
Fixes: c8b1917c89 ("ACPICA: Clear status of GPEs before enabling them")
Link: https://lore.kernel.org/lkml/s5hy33siofw.wl-tiwai@suse.de/T/#u
Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1132943
Reported-by: Michael Hirmke <opensuse@mike.franken.de>
Reported-by: Takashi Iwai <tiwai@suse.de>
Cc: 4.17+ <stable@vger.kernel.org> # 4.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Third set of fixes for 5.1.
iwlwifi
* fix an oops when creating debugfs entries
* fix bug when trying to capture debugging info while in rfkill
* prevent potential uninitialized memory dumps into debugging logs
* fix some initialization parameters for AX210 devices
* fix an oops with non-MSIX devices
* fix an oops when we receive a packet with bogus lengths
* fix a bug that prevented 5350 devices from working
* fix a small merge damage from the previous series
mwifiex
* fig regression with resume on SDIO
ath10k
* fix locking problem with crashdump
* fix warnings during suspend and resume
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJcyGH/AAoJEG4XJFUm622b3AIH/R/Af8W3E69s1jLpbwVpcnKX
jucK1WePDwgTttUI4cmtpCIlLImTiiMxgWd+ku7tpwz4kMJWY8KOjrvwN3ulNGUr
R0Vbsyc/CXS41DtfZt8IpckF3ru1omtdmBTfMEermoPbZZNtx1j34Odkn0VtEcjW
7Ml7u6YfZc/tKgWmIO6afhqMRgnChWGhK76ayCF7/9YM17uSoGw+rdLIM8o20+jE
VwMbhvNuZILwTZ35mbi1Tnbz8dZr/1J7yMqrmfuZFkpLseWixcQ6zK53A8PTJ0Cf
6B+fiu7+9mUzNaqzuemlYrZ2PsGXprdjrBNaHcnRrc3+GZlilKcDFQQCPWrpmz8=
=WiMH
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-for-davem-2019-04-30' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for 5.1
Third set of fixes for 5.1.
iwlwifi
* fix an oops when creating debugfs entries
* fix bug when trying to capture debugging info while in rfkill
* prevent potential uninitialized memory dumps into debugging logs
* fix some initialization parameters for AX210 devices
* fix an oops with non-MSIX devices
* fix an oops when we receive a packet with bogus lengths
* fix a bug that prevented 5350 devices from working
* fix a small merge damage from the previous series
mwifiex
* fig regression with resume on SDIO
ath10k
* fix locking problem with crashdump
* fix warnings during suspend and resume
Also note that this pull conflicts with net-next. And I want to emphasie
that it's really net-next, so when you pull this to net tree it should
go without conflicts. Stephen reported the conflict here:
https://lkml.kernel.org/r/20190429115338.5decb50b@canb.auug.org.au
In iwlwifi oddly commit 154d4899e4 adds the IS_ERR_OR_NULL() in
wireless-drivers but commit c9af7528c3 removes the whole check in
wireless-drivers-next. The fix is easy, just drop the whole check for
mvmvif->dbgfs_dir in iwlwifi/mvm/debugfs-vif.c, it's unneeded anyway.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Here are some small USB fixes for a bunch of warnings/errors that the
syzbot has been finding with it's new-found ability to stress-test the
USB layer.
All of these are tiny, but fix real issues, and are marked for stable as
well. All of these have had lots of testing in linux-next as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXMhb1Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykHdQCeMK3TfwWjqSSCcgvbTaxhvx8Fwg4AoJRLspLh
FgVo+vaKf6SFlZdAVSJ8
=28RC
-----END PGP SIGNATURE-----
Merge tag 'usb-5.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for a bunch of warnings/errors that the
syzbot has been finding with it's new-found ability to stress-test the
USB layer.
All of these are tiny, but fix real issues, and are marked for stable
as well. All of these have had lots of testing in linux-next as well"
* tag 'usb-5.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: w1 ds2490: Fix bug caused by improper use of altsetting array
USB: yurex: Fix protection fault after device removal
usb: usbip: fix isoc packet num validation in get_pipe
USB: core: Fix bug caused by duplicate interface PM usage counter
USB: dummy-hcd: Fix failure to give back unlinked URBs
USB: core: Fix unterminated string returned by usb_string()
There is no operation to order with afterwards, and removing the flag is
not critical in any way.
There will always be a "race condition" where the application will
trigger IORING_ENTER_SQ_WAKEUP when it isn't actually needed.
Signed-off-by: Stefan Bühler <source@stbuehler.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
smp_store_release in io_commit_sqring already orders the store to
dropped before the update to SQ head.
Signed-off-by: Stefan Bühler <source@stbuehler.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The memory operations before reading cq head are unrelated and we
don't care about their order.
Document that the control dependency in combination with READ_ONCE and
WRITE_ONCE forms a barrier we need.
Signed-off-by: Stefan Bühler <source@stbuehler.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
wq_has_sleeper has a full barrier internally. The smp_rmb barrier in
io_uring_poll synchronizes with it.
Signed-off-by: Stefan Bühler <source@stbuehler.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The application reading the CQ ring needs a barrier to pair with the
smp_store_release in io_commit_cqring, not the barrier after it.
Also a write barrier *after* writing something (but not *before*
writing anything interesting) doesn't order anything, so an smp_wmb()
after writing SQ tail is not needed.
Additionally consider reading SQ head and writing CQ tail in the notes.
Also add some clarifications how the various other fields in the ring
buffers are used.
Signed-off-by: Stefan Bühler <source@stbuehler.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Not all request types set REQ_F_FORCE_NONBLOCK when they needed async
punting; reverse logic instead and set REQ_F_NOWAIT if request mustn't
be punted.
Signed-off-by: Stefan Bühler <source@stbuehler.de>
Merged with my previous patch for this.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=POTH
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20190429' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fix from Paul Moore:
"One small patch for the stable folks to fix a problem when building
against the latest glibc.
I'll be honest and say that I'm not really thrilled with the idea of
sending this up right now, but Greg is a little annoyed so here I
figured I would at least send this"
* tag 'selinux-pr-20190429' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: use kernel linux/socket.h for genheaders and mdp
If register_snap_client fails in atalk_init,
error code should be set, otherwise it will
triggers NULL pointer dereference while unloading
module.
Fixes: 9804501fa1 ("appletalk: Fix potential NULL pointer dereference in unregister_snap_client")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The "fs->location" is a u32 that comes from the user in ethtool_set_rxnfc().
We can't pass unclamped values to test_bit() or it results in an out of
bounds access beyond the end of the bitmap.
Fixes: 7318166cac ("net: dsa: bcm_sf2: Add support for ethtool::rxnfc")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In rxrpc_destroy_all_calls(), there are two phases: (1) make sure the
->calls list is empty, emitting error messages if not, and (2) wait for the
RCU cleanup to happen on outstanding calls (ie. ->nr_calls becomes 0).
To avoid taking the call_lock, the function prechecks ->calls and if empty,
it returns to avoid taking the lock - this is wrong, however: it still
needs to go and do the second phase and wait for ->nr_calls to become 0.
Without this, the rxrpc_net struct may get deallocated before we get to the
RCU cleanup for the last calls. This can lead to:
Slab corruption (Not tainted): kmalloc-16k start=ffff88802b178000, len=16384
050: 6b 6b 6b 6b 6b 6b 6b 6b 61 6b 6b 6b 6b 6b 6b 6b kkkkkkkkakkkkkkk
Note the "61" at offset 0x58. This corresponds to the ->nr_calls member of
struct rxrpc_net (which is >9k in size, and thus allocated out of the 16k
slab).
Fix this by flipping the condition on the if-statement, putting the locked
section inside the if-body and dropping the return from there. The
function will then always go on to wait for the RCU cleanup on outstanding
calls.
Fixes: 2baec2c3f8 ("rxrpc: Support network namespacing")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2019-04-30
1) A lot of work to remove indirections from the xfrm code.
From Florian Westphal.
2) Support ESP offload in combination with gso partial.
From Boris Pismenny.
3) Remove some duplicated code from vti4.
From Jeremy Sowden.
Please note that there is merge conflict
between commit:
8742dc86d0 ("xfrm4: Fix uninitialized memory read in _decode_session4")
from the ipsec tree and commit:
c53ac41e37 ("xfrm: remove decode_session indirection from afinfo_policy")
from the ipsec-next tree. The merge conflict will appear
when those trees get merged during the merge window.
The conflict can be solved as it is done in linux-next:
https://lkml.org/lkml/2019/4/25/1207
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net): ipsec 2019-04-30
1) Fix an out-of-bound array accesses in __xfrm_policy_unlink.
From YueHaibing.
2) Reset the secpath on failure in the ESP GRO handlers
to avoid dereferencing an invalid pointer on error.
From Myungho Jung.
3) Add and revert a patch that tried to add rcu annotations
to netns_xfrm. From Su Yanjun.
4) Wait for rcu callbacks before freeing xfrm6_tunnel_spi_kmem.
From Su Yanjun.
5) Fix forgotten vti4 ipip tunnel deregistration.
From Jeremy Sowden:
6) Remove some duplicated log messages in vti4.
From Jeremy Sowden.
7) Don't use IPSEC_PROTO_ANY when flushing states because
this will flush only IPsec portocol speciffic states.
IPPROTO_ROUTING states may remain in the lists when
doing net exit. Fix this by replacing IPSEC_PROTO_ANY
with zero. From Cong Wang.
8) Add length check for UDP encapsulation to fix "Oversized IP packet"
warnings on receive side. From Sabrina Dubroca.
9) Fix xfrm interface lookup when the interface is associated to
a vrf layer 3 master device. From Martin Willi.
10) Reload header pointers after pskb_may_pull() in _decode_session4(),
otherwise we may read from uninitialized memory.
11) Update the documentation about xfrm[46]_gc_thresh, it
is not used anymore after the flowcache removal.
From Nicolas Dichtel.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When there is no route to an IPv6 dest addr, skb_dst(skb) points
to loopback dev in the case of that the IP6CB(skb)->iif is
enslaved to a vrf. This causes Ip6InNoRoutes to be incremented on the
loopback dev. This also causes the lookup to fail on icmpv6_send() and
the dest unreachable to not sent and Ip6OutNoRoutes gets incremented on
the loopback dev.
To reproduce:
* Gateway configuration:
ip link add dev vrf_258 type vrf table 258
ip link set dev enp0s9 master vrf_258
ip addr add 66:1/64 dev enp0s9
ip -6 route add unreachable default metric 8192 table 258
sysctl -w net.ipv6.conf.all.forwarding=1
sysctl -w net.ipv6.conf.enp0s9.forwarding=1
* Sender configuration:
ip addr add 66::2/64 dev enp0s9
ip -6 route add default via 66::1
and ping 67::1 for example from the sender.
Fix this by counting on the original netdev and reset the skb dst to
force a fresh lookup.
v2: Fix typo of destination address in the repro steps.
v3: Simplify the loopback check (per David Ahern) and use reverse
Christmas tree format (per David Miller).
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Richard and Bruno both reported that my commit added a bug,
and Bruno was able to determine the problem came when a segment
wih a FIN packet was coalesced to a prior one in tcp backlog queue.
It turns out the header prediction in tcp_rcv_established()
looks back to TCP headers in the packet, not in the metadata
(aka TCP_SKB_CB(skb)->tcp_flags)
The fast path in tcp_rcv_established() is not supposed to
handle a FIN flag (it does not call tcp_fin())
Therefore we need to make sure to propagate the FIN flag,
so that the coalesced packet does not go through the fast path,
the same than a GRO packet carrying a FIN flag.
While we are at it, make sure we do not coalesce packets with
RST or SYN, or if they do not have ACK set.
Many thanks to Richard and Bruno for pinpointing the bad commit,
and to Richard for providing a first version of the fix.
Fixes: 4f693b55c3 ("tcp: implement coalescing on backlog queue")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reported-by: Bruno Prémont <bonbons@sysophe.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
The KSZ8081 PHY has a factory test mode which is set at the de-assertion
of the reset line based on the RXER (KSZ8081RNA/RND) or TXC
(KSZ8081MNX/RNB) pin. If a pull-down is missing, or if the pin has a
pull-up, the factory test mode should be cleared by manually writing a 0
(according to the datasheet). This patch makes sure this factory test
bit is cleared in config_init().
Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
A request for a flowlabel fails in process or user exclusive mode must
fail if the caller pid or uid does not match. Invert the test.
Previously, the test was unsafe wrt PID recycling, but indeed tested
for inequality: fl1->owner != fl->owner
Fixes: 4f82f45730 ("net ip6 flowlabel: Make owner a union of struct pid* and kuid_t")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefan Schmidt says:
====================
ieee802154 for net 2019-04-25
An update from ieee802154 for your *net* tree.
Another fix from Kangjie Lu to ensure better checking regmap updates in the
mcr20a driver. Nothing else I have pending for the final release.
If there are any problems let me know.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
- Add logic for making some seccomp flags exclusive (Tycho)
- Update selftests for exclusivity testing (Kees)
-----BEGIN PGP SIGNATURE-----
Comment: Kees Cook <kees@outflux.net>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=12Pp
-----END PGP SIGNATURE-----
Merge tag 'seccomp-v5.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp fixes from Kees Cook:
"Syzbot found a use-after-free bug in seccomp due to flags that should
not be allowed to be used together.
Tycho fixed this, I updated the self-tests, and the syzkaller PoC has
been running for several days without triggering KASan (before this
fix, it would reproduce). These patches have also been in -next for
almost a week, just to be sure.
- Add logic for making some seccomp flags exclusive (Tycho)
- Update selftests for exclusivity testing (Kees)"
* tag 'seccomp-v5.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
seccomp: Make NEW_LISTENER and TSYNC flags exclusive
selftests/seccomp: Prepare for exclusive seccomp flags
This doesn't really do anything, but at least we now parse teh
ZERO_PAGE() address argument so that we'll catch the most obvious errors
in usage next time they'll happen.
See commit 6a5c5d26c4 ("rdma: fix build errors on s390 and MIPS due to
bad ZERO_PAGE use") what happens when we don't have any use of the macro
argument at all.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The parameter to ZERO_PAGE() was wrong, but since all architectures
except for MIPS and s390 ignore it, it wasn't noticed until 0-day
reported the build error.
Fixes: 67f269b37f ("RDMA/ucontext: Fix regression with disassociate")
Cc: stable@vger.kernel.org
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When compiling genheaders and mdp from a newer host kernel, the
following error happens:
In file included from scripts/selinux/genheaders/genheaders.c:18:
./security/selinux/include/classmap.h:238:2: error: #error New
address family defined, please update secclass_map. #error New
address family defined, please update secclass_map. ^~~~~
make[3]: *** [scripts/Makefile.host:107:
scripts/selinux/genheaders/genheaders] Error 1 make[2]: ***
[scripts/Makefile.build:599: scripts/selinux/genheaders] Error 2
make[1]: *** [scripts/Makefile.build:599: scripts/selinux] Error 2
make[1]: *** Waiting for unfinished jobs....
Instead of relying on the host definition, include linux/socket.h in
classmap.h to have PF_MAX.
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara <paulo@paulo.ac>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
[PM: manually merge in mdp.c, subject line tweaks]
Signed-off-by: Paul Moore <paul@paul-moore.com>
ath10k_mac_vif_chan() always returns an error for the given vif
during system-wide resume which reliably triggers two WARN_ON()s
in ath10k_bss_info_changed() and they are not particularly
useful in that code path, so drop them.
Tested: QCA6174 hw3.2 PCI with WLAN.RM.2.0-00180-QCARMSWPZ-1
Tested: QCA6174 hw3.2 SDIO with WLAN.RMH.4.4.1-00007-QCARMSWP-1
Fixes: cd93b83ad9 ("ath10k: support for multicast rate control")
Fixes: f279294e9e ("ath10k: add support for configuring management packet rate")
Cc: stable@vger.kernel.org
Reviewed-by: Brian Norris <briannorris@chromium.org>
Tested-by: Brian Norris <briannorris@chromium.org>
Tested-by: Claire Chang <tientzu@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Commit 25733c4e67 ("ath10k: pci: use mutex for diagnostic window CE
polling") introduced a regression where we try to sleep (grab a mutex)
in an atomic context:
[ 233.602619] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:254
[ 233.602626] in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper/0
[ 233.602636] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 5.1.0-rc2 #4
[ 233.602642] Hardware name: Google Scarlet (DT)
[ 233.602647] Call trace:
[ 233.602663] dump_backtrace+0x0/0x11c
[ 233.602672] show_stack+0x20/0x28
[ 233.602681] dump_stack+0x98/0xbc
[ 233.602690] ___might_sleep+0x154/0x16c
[ 233.602696] __might_sleep+0x78/0x88
[ 233.602704] mutex_lock+0x2c/0x5c
[ 233.602717] ath10k_pci_diag_read_mem+0x68/0x21c [ath10k_pci]
[ 233.602725] ath10k_pci_diag_read32+0x48/0x74 [ath10k_pci]
[ 233.602733] ath10k_pci_dump_registers+0x5c/0x16c [ath10k_pci]
[ 233.602741] ath10k_pci_fw_crashed_dump+0xb8/0x548 [ath10k_pci]
[ 233.602749] ath10k_pci_napi_poll+0x60/0x128 [ath10k_pci]
[ 233.602757] net_rx_action+0x140/0x388
[ 233.602766] __do_softirq+0x1b0/0x35c
[...]
ath10k_pci_fw_crashed_dump() is called from NAPI contexts, and firmware
memory dumps are retrieved using the diag memory interface.
A simple reproduction case is to run this on QCA6174A /
WLAN.RM.4.4.1-00132-QCARMSWP-1, which happens to be a way to b0rk the
firmware:
dd if=/sys/kernel/debug/ieee80211/phy0/ath10k/mem_value bs=4K count=1
of=/dev/null
(NB: simulated firmware crashes, via debugfs, don't trigger firmware
dumps.)
The fix is to move the crash-dump into a workqueue context, and avoid
relying on 'data_lock' for most mutual exclusion. We only keep using it
here for protecting 'fw_crash_counter', while the rest of the coredump
buffers are protected by a new 'dump_mutex'.
I've tested the above with simulated firmware crashes (debugfs 'reset'
file), real firmware crashes (the 'dd' command above), and a variety of
reboot and suspend/resume configurations on QCA6174A.
Reported here:
http://lkml.kernel.org/linux-wireless/20190325202706.GA68720@google.com
Fixes: 25733c4e67 ("ath10k: pci: use mutex for diagnostic window CE polling")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Considering that in polling mode each link drop will be latched,
settings can't have changed if link was up and is up.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn says:
====================
Make DSA tag drivers kernel modules
Historically, DSA tag drivers have been compiled into the kernel as
part of the DSA core. With the growing number of tag drivers, it makes
sense to allow this driver code to be compiled as a module, and loaded
on demand.
v2
--
Move name to end of structure, keeping the hot entries at the beginning.
More tag protocol to end of structure to keep hot members at the beginning.
Fix indent of #endif
Rewrite to move list pointer into a new structure
void functions, since there cannot be errors
Fix fall-through comment
Reorder patch for unused symbols to before tag drivers can be modules
tab/space cleanup
Help text wording
NET_DSA_TAG_BRCM_COMMON and NET_DSA_TAG_KZS_COMMON hidden
v3
--
boilerplate: Move kdoc next to macro
boilerplate: Fix THIS_MODULE indentation
Kconfig: More tabification
Kconfig: Punctuation
v4
--
Cover note {H}istorically
Kconfig: trailer
====================
Tested-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller
Vladimir Oltean
Linus Torvalds
Rafael J. Wysocki
Stefan Bühler
Eric Dumazet
YueHaibing
Dan Carpenter
David Howells
Stephen Suryaputra
Antoine Tenart
Willem de Bruijn
Kalle Valo
Paulo Alcantara
Brian Norris
Heiner Kallweit