The ability of enqueueing a task to the head of a SCHED_FIFO priority
list is required to fix some violations of POSIX scheduling policy.
Extend the related functions with a "head" argument.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Carsten Emde <cbe@osadl.org>
Tested-by: Mathias Weber <mathias.weber.mw1@roche.com>
LKML-Reference: <20100120171629.734886007@linutronix.de>
We want to update the sched_group_powers when balance_cpu == this_cpu.
Currently the group powers are updated only if the balance_cpu is the
first CPU in the local group. But balance_cpu = this_cpu could also be
the first idle cpu in the group. Hence fix the place where the group
powers are updated.
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Signed-off-by: Joel Schopp <jschopp@austin.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1264017764.5717.127.camel@jschopp-laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Since all load_balance() callers will have !NULL balance parameters we
can now assume so and remove a few checks.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The two functions: load_balance{,_newidle}() are very similar, with the
following differences:
- rq->lock usage
- sb->balance_interval updates
- *balance check
So remove the load_balance_newidle() call with load_balance(.idle =
CPU_NEWLY_IDLE), explicitly unlock the rq->lock before calling (would be
done by double_lock_balance() anyway), and ignore the other differences
for now.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
load_balance() and load_balance_newidle() look remarkably similar, one
key point they differ in is the condition on when to active balance.
So split out that logic into a separate function.
One side effect is that previously load_balance_newidle() used to fail
and return -1 under these conditions, whereas now it doesn't. I've not
yet fully figured out the whole -1 return case for either
load_balance{,_newidle}().
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Since load-balancing can hold rq->locks for quite a long while, allow
breaking out early when there is lock contention.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Move code around to get rid of fwd declarations.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Again, since we only iterate the fair class, remove the abstraction.
Since this is the last user of the rq_iterator, remove all that too.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Since we only ever iterate the fair class, do away with this abstraction.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Take out the sched_class methods for load-balancing.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Straight fwd code movement.
Since non of the load-balance abstractions are used anymore, do away with
them and simplify the code some. In preparation move the code around.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
SD_PREFER_SIBLING is set at the CPU domain level if power saving isn't
enabled, leading to many cache misses on large machines as we traverse
looking for an idle shared cache to wake to. Change the enabler of
select_idle_sibling() to SD_SHARE_PKG_RESOURCES, and enable same at the
sibling domain level.
Reported-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1262612696.15495.15.camel@marge.simson.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
kernel/sched: don't expose local functions
The get_rr_interval_* functions are all class methods of
struct sched_class. They are not exported so make them
static.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <201001132021.53253.hartleys@visionengravers.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In order to remove the cfs_rq dependency from set_task_cpu() we
need to ensure the task is cfs_rq invariant for all callsites.
The simple approach is to substract cfs_rq->min_vruntime from
se->vruntime on dequeue, and add cfs_rq->min_vruntime on
enqueue.
However, this has the downside of breaking FAIR_SLEEPERS since
we loose the old vruntime as we only maintain the relative
position.
To solve this, we observe that we only migrate runnable tasks,
we do this using deactivate_task(.sleep=0) and
activate_task(.wakeup=0), therefore we can restrain the
min_vruntime invariance to that state.
The only other case is wakeup balancing, since we want to
maintain the old vruntime we cannot make it relative on dequeue,
but since we don't migrate inactive tasks, we can do so right
before we activate it again.
This is where we need the new pre-wakeup hook, we need to call
this while still holding the old rq->lock. We could fold it into
->select_task_rq(), but since that has multiple callsites and
would obfuscate the locking requirements, that seems like a
fudge.
This leaves the fork() case, simply make sure that ->task_fork()
leaves the ->vruntime in a relative state.
This covers all cases where set_task_cpu() gets called, and
ensures it sees a relative vruntime.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <20091216170518.191697025@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Convert locks which cannot be sleeping locks in preempt-rt to
raw_spinlocks.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
The normalized values are also recalculated in case the scaling factor
changes.
This patch updates the internally used scheduler tuning values that are
normalized to one cpu in case a user sets new values via sysfs.
Together with patch 2 of this series this allows to let user configured
values scale (or not) to cpu add/remove events taking place later.
Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1259579808-11357-4-git-send-email-ehrhardt@linux.vnet.ibm.com>
[ v2: fix warning ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
As scaling now takes place on all kind of cpu add/remove events a user
that configures values via proc should be able to configure if his set
values are still rescaled or kept whatever happens.
As the comments state that log2 was just a second guess that worked the
interface is not just designed for on/off, but to choose a scaling type.
Currently this allows none, log and linear, but more important it allwos
us to keep the interface even if someone has an even better idea how to
scale the values.
Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1259579808-11357-3-git-send-email-ehrhardt@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Based on Peter Zijlstras patch suggestion this enables recalculation of
the scheduler tunables in response of a change in the number of cpus. It
also adds a max of eight cpus that are considered in that scaling.
Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1259579808-11357-2-git-send-email-ehrhardt@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
As Nick pointed out, and realized by myself when doing:
sched: Fix balance vs hotplug race
the patch:
sched: for_each_domain() vs RCU
is wrong, sched_domains are freed after synchronize_sched(), which
means disabling preemption is enough.
Reported-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
WAKEUP_RUNNING was an experiment, not sure why that ever ended up being
merged...
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Streamline the wakeup preemption code a bit, unifying the preempt path
so that they all do the same.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If a RT task is woken up while a non-RT task is running,
check_preempt_wakeup() is called to check whether the new task can
preempt the old task. The function returns quickly without going deeper
because it is apparent that a RT task can always preempt a non-RT task.
In this situation, check_preempt_wakeup() always calls update_curr() to
update vruntime value of the currently running task. However, the
function call is unnecessary and redundant at that moment because (1) a
non-RT task can always be preempted by a RT task regardless of its
vruntime value, and (2) update_curr() will be called shortly when the
context switch between two occurs.
By moving update_curr() in check_preempt_wakeup(), we can avoid
redundant call to update_curr(), slightly reducing the time taken to
wake up RT tasks.
Signed-off-by: Jupyung Lee <jupyung@gmail.com>
[ Place update_curr() right before the wake_preempt_entity() call, which
is the only thing that relies on the updated vruntime ]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1258451500-6714-1-git-send-email-jupyung@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Currently we try to do task placement in wake_up_new_task() after we do
the load-balance pass in sched_fork(). This yields complicated semantics
in that we have to deal with tasks on different RQs and the
set_task_cpu() calls in copy_process() and sched_fork()
Rename ->task_new() to ->task_fork() and call it from sched_fork()
before the balancing, this gives the policy a clear point to place the
task.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
sched_rr_get_param calls
task->sched_class->get_rr_interval(task) without protection
against a concurrent sched_setscheduler() call which modifies
task->sched_class.
Serialize the access with task_rq_lock(task) and hand the rq
pointer into get_rr_interval() as it's needed at least in the
sched_fair implementation.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <alpine.LFD.2.00.0912090930120.3089@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Instead of only considering SD_WAKE_AFFINE | SD_PREFER_SIBLING
domains also allow all SD_PREFER_SIBLING domains below a
SD_WAKE_AFFINE domain to change the affinity target.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <20091112145610.909723612@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Clean up the new affine to idle sibling bits while trying to
grok them. Should not have any function differences.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <20091112145610.832503781@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When waking affine, check for an idle shared cache, and if
found, wake to that CPU/sibling instead of the waker's CPU.
This improves pgsql+oltp ramp up by roughly 8%. Possibly more
for other loads, depending on overlap. The trade-off is a
roughly 1% peak downturn if tasks are truly synchronous.
Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@kernel.org>
LKML-Reference: <1256654138.17752.7.camel@marge.simson.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch restores the effectiveness of LAST_BUDDY in preventing
pgsql+oltp from collapsing due to wakeup preemption. It also
switches LAST_BUDDY to exclusively do what it does best, namely
mitigate the effects of aggressive wakeup preemption, which
improves vmark throughput markedly, and restores mysql+oltp
scalability.
Since buddies are about scalability, enable them beginning at the
point where we begin expanding sched_latency, namely
sched_nr_latency. Previously, buddies were cleared aggressively,
which seriously reduced their effectiveness. Not clearing
aggressively however, produces a small drop in mysql+oltp
throughput immediately after peak, indicating that LAST_BUDDY is
actually doing some harm. This is right at the point where X on the
desktop in competition with another load wants low latency service.
Ergo, do not enable until we need to scale.
To mitigate latency induced by buddies, or by a task just missing
wakeup preemption, check latency at tick time.
Last hunk prevents buddies from stymieing BALANCE_NEWIDLE via
CACHE_HOT_BUDDY.
Supporting performance tests:
tip = v2.6.32-rc5-1497-ga525b32
tipx = NO_GENTLE_FAIR_SLEEPERS NEXT_BUDDY granularity knobs = 31 knobs + 31 buddies
tip+x = NO_GENTLE_FAIR_SLEEPERS granularity knobs = 31 knobs
(Three run averages except where noted.)
vmark:
------
tip 108466 messages per second
tip+ 125307 messages per second
tip+x 125335 messages per second
tipx 117781 messages per second
2.6.31.3 122729 messages per second
mysql+oltp:
-----------
clients 1 2 4 8 16 32 64 128 256
..........................................................................................
tip 9949.89 18690.20 34801.24 34460.04 32682.88 30765.97 28305.27 25059.64 19548.08
tip+ 10013.90 18526.84 34900.38 34420.14 33069.83 32083.40 30578.30 28010.71 25605.47
tipx 9698.71 18002.70 34477.56 33420.01 32634.30 31657.27 29932.67 26827.52 21487.18
2.6.31.3 8243.11 18784.20 34404.83 33148.38 31900.32 31161.90 29663.81 25995.94 18058.86
pgsql+oltp:
-----------
clients 1 2 4 8 16 32 64 128 256
..........................................................................................
tip 13686.37 26609.25 51934.28 51347.81 49479.51 45312.65 36691.91 26851.57 24145.35
tip+ (1x) 13907.85 27135.87 52951.98 52514.04 51742.52 50705.43 49947.97 48374.19 46227.94
tip+x 13906.78 27065.81 52951.19 52542.59 52176.11 51815.94 50838.90 49439.46 46891.00
tipx 13742.46 26769.81 52351.99 51891.73 51320.79 50938.98 50248.65 48908.70 46553.84
2.6.31.3 13815.35 26906.46 52683.34 52061.31 51937.10 51376.80 50474.28 49394.47 47003.25
Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Yanmin reported a hackbench regression due to:
> commit de69a80be3
> Author: Peter Zijlstra <a.p.zijlstra@chello.nl>
> Date: Thu Sep 17 09:01:20 2009 +0200
>
> sched: Stop buddies from hogging the system
I really liked de69a80b, and it affecting hackbench shows I wasn't
crazy ;-)
So hackbench is a multi-cast, with one sender spraying multiple
receivers, who in their turn don't spray back.
This would be exactly the scenario that patch 'cures'. Previously
we would not clear the last buddy after running the next task,
allowing the sender to get back to work sooner than it otherwise
ought to have been, increasing latencies for other tasks.
Now, since those receivers don't poke back, they don't enforce the
buddy relation, which means there's nothing to re-elect the sender.
Cure this by less agressively clearing the buddy stats. Only clear
buddies when they were not chosen. It should still avoid a buddy
sticking around long after its served its time.
Reported-by: "Zhang, Yanmin" <yanmin_zhang@linux.intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
CC: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1255084986.8802.46.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It's unused.
It isn't needed -- read or write flag is already passed and sysctl
shouldn't care about the rest.
It _was_ used in two places at arch/frv for some reason.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sched: Simplify sys_sched_rr_get_interval() system call
sched: Fix potential NULL derference of doms_cur
sched: Fix raciness in runqueue_is_locked()
sched: Re-add lost cpu_allowed check to sched_fair.c::select_task_rq_fair()
sched: Remove unneeded indentation in sched_fair.c::place_entity()
By removing the need for it to know details of scheduling classes.
This allows PlugSched to define orthogonal scheduling classes.
Signed-off-by: Peter Williams <pwil3058@bigpond.net.au>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <06d1b89ee15a0eef82d7.1253496713@mudlark.pw.nest>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
While doing some testing, I pinned mplayer, only to find it
following X around like a puppy. Looking at commit c88d591, I found
a cpu_allowed check that went AWOL. I plugged it back in where it
looks like it needs to go, and now when I say "sit, stay!", mplayer
obeys again.
'c88d591 sched: Merge select_task_rq_fair() and
sched_balance_self()' accidentally dropped the check, causing
wake_affine() to pull pinned tasks - put it back.
[ v2: use a cheaper version from Peter ]
Signed-off-by: Mike Galbraith <efault@gmx.de>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The SD_POWERSAVING_BALANCE|SD_PREFER_LOCAL code can break out of
the domain iteration early, making us miss the SD_WAKE_AFFINE bits.
Fix this by continuing iteration until there is no need for a
larger domain.
This also cleans up the cgroup stuff a bit, but not having two
update_shares() invocations.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Clear buddies more agressively.
The (theoretical, haven't actually observed any of this) problem is
that when we do not select either buddy in pick_next_entity()
because they are too far ahead of the left-most task, we do not
clear the buddies.
This means that as soon as we service the left-most task, these
same buddies will be tried again on the next schedule. Now if the
left-most task was a pure hog, it wouldn't have done any wakeups
and it wouldn't have set buddies of its own. That leads to the old
buddies dominating, which would lead to bad latencies.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Create a new wakeup preemption mode, preempt towards tasks that run
shorter on avg. It sets next buddy to be sure we actually run the task
we preempted for.
Test results:
root@twins:~# while :; do :; done &
[1] 6537
root@twins:~# while :; do :; done &
[2] 6538
root@twins:~# while :; do :; done &
[3] 6539
root@twins:~# while :; do :; done &
[4] 6540
root@twins:/home/peter# ./latt -c4 sleep 4
Entries: 48 (clients=4)
Averages:
------------------------------
Max 4750 usec
Avg 497 usec
Stdev 737 usec
root@twins:/home/peter# echo WAKEUP_RUNNING > /debug/sched_features
root@twins:/home/peter# ./latt -c4 sleep 4
Entries: 48 (clients=4)
Averages:
------------------------------
Max 14 usec
Avg 5 usec
Stdev 3 usec
Disabled by default - needs more testing.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <new-submission>
Clean up the code a little.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We don't need to call update_shares() for each domain we iterate,
just got the largets one.
However, we should call it before wake_affine() as well, so that
that can use up-to-date values too.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add back FAIR_SLEEPERS and GENTLE_FAIR_SLEEPERS.
FAIR_SLEEPERS is the old logic: credit sleepers with their sleep time.
GENTLE_FAIR_SLEEPERS dampens this a bit: 50% of their sleep time gets
credited.
The hope here is to still give the benefits of fair-sleepers logic
(quick wakeups, etc.) while not allow them to have 100% of their
sleep time as if they were running.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
And turn it on for NUMA and MC domains. This improves
locality in balancing decisions by keeping up to
capacity amount of tasks local before looking for idle
CPUs. (and twice the capacity if SD_POWERSAVINGS_BALANCE
is set.)
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Currently we use overlap to weaken the SYNC hint, but allow it to
set the hint as well.
echo NO_SYNC_WAKEUP > /debug/sched_features
echo SYNC_MORE > /debug/sched_features
preserves pipe-test behaviour without using the WF_SYNC hint.
Worth playing with on more workloads...
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Avoid the cache buddies from biasing the time distribution away
from fork()ers. Normally the next buddy will be the preferred
scheduling target, but this makes fork()s prefer to run the new
child, whereas we prefer to run the parent, since that will
generate more work.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar
Thomas Gleixner
Gautham R Shenoy
Peter Zijlstra
Mike Galbraith
H Hartley Sweeten
Christian Ehrhardt
Jupyung Lee
Tim Blechmann
Alexey Dobriyan
Linus Torvalds
Peter Williams
Peter Zijlstra