Граф коммитов

837 Коммитов

Автор SHA1 Сообщение Дата
Rafael J. Wysocki ec4602a958 ACPI / PM: Allow device power states to be used for CONFIG_PM unset
Currently, drivers/acpi/device_pm.c depends on CONFIG_PM and all of
the functions defined in there are replaced with static inline stubs
if that option is unset.  However, CONFIG_PM means, roughly, "runtime
PM or suspend/hibernation support" and some of those functions are
useful regardless of that.  For example, they are used by the ACPI
fan driver for controlling fans and acpi_device_set_power() is called
during device removal.  Moreover, device initialization may depend on
setting device power states properly.

For these reasons, make the routines manipulating ACPI device power
states defined in drivers/acpi/device_pm.c available for CONFIG_PM
unset too.

Reported-by: Zhang Rui <rui.zhang@intel.com>
Reported-and-tested-by: Michel Lespinasse <walken@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: 3.9+ <stable@vger.kernel.org>
2013-05-22 00:19:28 +02:00
Jan-Simon Möller 36200af867 ACPI: Fix section to __init. Align with usage in acpixf.h
Fixes warning during compilation with clang.

[rjw: Subject and changelog]
Signed-off-by: Jan-Simon Möller <dl9pf@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-05-12 14:03:14 +02:00
Rafael J. Wysocki 0a3b15ac3c ACPI / PM: Move processor suspend/resume to syscore_ops
The system suspend routine of the ACPI processor driver saves
the BUS_MASTER_RLD register and its resume routine restores it.
However, there can be only one such register in the system and it
really should be saved after non-boot CPUs have been offlined and
restored before they are put back online during resume.

For this reason, move the saving and restoration of BUS_MASTER_RLD
to syscore suspend and syscore resume, respectively, and drop the no
longer necessary suspend/resume callbacks from the ACPI processor
driver.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-05-12 14:03:14 +02:00
Rafael J. Wysocki c940c8ce1d Merge branch 'acpi-assorted'
* acpi-assorted: (21 commits)
  ACPI / thermal: do not always return THERMAL_TREND_RAISING for active trip points
  ACPI: video: correct acpi_video_bus_add error processing
  ACPI: Fix wrong parameter passed to memblock_reserve
  acpi: video: enhance the quirk detect logic of _BQC
  ACPI: update comments for acpi_event_status
  ACPI: remove "config ACPI_DEBUG_FUNC_TRACE"
  PCI / ACPI: Don't query OSC support with all possible controls
  ACPI / processor_thermal: avoid null pointer deference error
  ACPI / fan: avoid null pointer deference error
  ACPI / video: Fix applying indexed initial brightness value.
  ACPI / video: Make logic a little easier to understand.
  ACPI / video: Fix brightness control initialization for some laptops.
  ACPI: Use resource_size() in osl.c
  ACPI / acpi_pad: Used PTR_RET
  ACPI: suppress compiler warning in container.c
  ACPI: suppress compiler warning in battery.c
  ACPI: suppress compiler warnings in processor_throttling.c
  ACPI: suppress compiler warnings in button.c
  ACPI: replace kmalloc+memcpy with kmemdup
  ACPI: Remove acpi_pci_bind_root() definition
  ...
2013-04-28 01:54:08 +02:00
Rafael J. Wysocki 0ad4991cae Merge branch 'acpica'
* acpica: (33 commits)
  ACPICA: Update version to 20130328
  ACPICA: Add a lock to the internal object reference count mechanism
  ACPICA: Fix a format string for 64-bit generation
  ACPICA: Remove FORCE_DELETE option for global reference count mechanism
  ACPICA: Improve error message for Index() operator
  ACPICA: FADT: Remove extraneous warning for very large GPE registers
  ACPICA: Fix a typo in a function header, no functional change
  ACPICA: Fix a typo in an error message
  ACPICA: Fix for some comments/headers
  ACPICA: _OSI Support: handle any errors from acpi_os_acquire_mutex()
  ACPICA: Predefine names: Add allowed argument types to master info table
  ACPI: Set length even for TYPE_END_TAG acpi resource
  ACPICA: Update version to 20130214
  ACPICA: Object repair: Allow 0-length packages for variable-length packages
  ACPICA: Disassembler: Add warnings for unresolved control methods
  ACPICA: Return object repair: Add resource template repairs
  ACPICA: Return object repair: Add string-to-unicode conversion
  ACPICA: Split object conversion functions to a new file
  ACPICA: Add mechanism for early object repairs on a per-name basis
  ACPICA: Remove trailing comma in enum declarations
  ...
2013-04-28 01:53:50 +02:00
Rafael J. Wysocki 929c6dd419 Merge branch 'acpi-hotplug'
* acpi-hotplug:
  ACPI / memhotplug: Remove info->failed bit
  ACPI / memhotplug: set info->enabled for memory present at boot time
  ACPI: Verify device status after eject
  acpi: remove reference to ACPI_HOTPLUG_IO
  ACPI: Update _OST handling for notify
  ACPI: Update PNPID match handling for notify
  ACPI: Update PNPID set/free interfaces
  ACPI: Remove acpi_device dependency in acpi_device_set_id()
  ACPI / hotplug: Make acpi_hotplug_profile_ktype static
  ACPI / scan: Make memory hotplug driver use struct acpi_scan_handler
  ACPI / container: Use hotplug profile user space interface
  ACPI / hotplug: Introduce user space interface for hotplug profiles
  ACPI / scan: Introduce acpi_scan_handler_matching()
  ACPI / container: Use common hotplug code
  ACPI / scan: Introduce common code for ACPI-based device hotplug
  ACPI / scan: Introduce acpi_scan_match_handler()
2013-04-28 01:53:34 +02:00
Zhang Rui 34f8f1031c ACPI: update comments for acpi_event_status
ACPI_EVENT_FLAG_HANDLE is a flag for acpi_event_status.
When it is set, it indicates that the ACPI event,
either GPE or fixed event, is associated with a handler.

Update the comments to reflect this flag.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-21 23:57:28 +02:00
Bob Moore 8ee88d5911 ACPICA: Update version to 20130328
Version 20130328.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-12 13:29:48 +02:00
Toshi Kani d4e1a692e9 ACPI: Remove acpi_device dependency in acpi_device_set_id()
This patch updates the internal operations of acpi_device_set_id()
to setup acpi_device_pnp without using acpi_device.  There is no
functional change to acpi_device_set_id() in this patch.

acpi_pnp_type is added to acpi_device_pnp, so that PNPID type is
self-contained within acpi_device_pnp.  acpi_add_id(), acpi_bay_match(),
acpi_dock_match(), acpi_ibm_smbus_match() and acpi_is_video_device()
are changed to take acpi_handle as an argument, instead of acpi_device.

Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-24 23:49:38 +01:00
Toshi Kani 82160dd8ba ACPI: Remove acpi_pci_bind_root() definition
Noticed that acpi_pci_bind_root(), which has been deleted,
is left defined in acpi_driver.h.  So delete this definition
from the header as well.

Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-24 23:28:02 +01:00
Linus Torvalds 7946844ae8 Fixes:
* Compile warnings and errors (one on x86, two on ARM)
  * WARNING in xen-pciback
  * Use the acpi_processor_get_performance_info instead of the 'register' version
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.13 (GNU/Linux)
 
 iQEcBAABAgAGBQJRP33uAAoJEFjIrFwIi8fJfxMIAJxK7jI7NghJ87b8uk3IrkDl
 VDsY5Re86XWE0HjsFDJXfWZCGumhpMb8hI1RJBavLDWQmk4THBqsKbx9rDgRZUJO
 HepvhwD/RdK+nnjVmbAzJKuc7aOKQmeEW3Weysb32DW9C5Wg27LRrto/oVJIUsyj
 4HrLcsZZqCiEYUZjGwrkrMC1yXx+2XvkX9mXq81hGj0xU4X1hMizwBAJvSE5lKca
 r4LaCoZ0SuayHYHjEtxyjAcu39wnMdlCkdW9DUlqrjK7L3X29ifVvnb+aS951O5E
 t57DCHY8WkI1BkaoHaAQqI7/Y1HpYbT8BALVmxXoIInI9lc8VLHZOs8/fVVDppQ=
 =MxoB
 -----END PGP SIGNATURE-----

Merge tag 'stable/for-linus-3.9-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

Pull Xen fixes from Konrad Rzeszutek Wilk:
 - Compile warnings and errors (one on x86, two on ARM)
 - WARNING in xen-pciback
 - Use the acpi_processor_get_performance_info instead of the 'register'
   version

* tag 'stable/for-linus-3.9-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/acpi: remove redundant acpi/acpi_drivers.h include
  xen: arm: mandate EABI and use generic atomic operations.
  acpi: Export the acpi_processor_get_performance_info
  xen/pciback: Don't disable a PCI device that is already disabled.
2013-03-12 20:25:53 -07:00
Bob Moore eccc534378 ACPICA: Update version to 20130214
Version 20130214.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-12 00:45:06 +01:00
Bob Moore 6be58e2f21 ACPICA: Remove trailing comma in enum declarations
SunStudio compiler complains about trailing commas in enum
declarations.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-12 00:45:05 +01:00
Bob Moore ae1b476998 ACPICA: Add exception descriptions to exception info table
Descriptions to be compiled/used by the acpihelp utility only. Not
compiled for the kernel ACPICA code.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-12 00:45:05 +01:00
Bob Moore 995b9a9d44 ACPICA: Add macros to exception code definitions
Simplifies the definitions of new and existing codes.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-12 00:45:05 +01:00
Bob Moore fd1af7126f ACPICA: Regression fix: reinstate safe exit macros
Removal caused a regression on at least FreeBSD. This fix
reinstates the macros.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-12 00:45:04 +01:00
Jung-uk Kim 3cf24497f4 ACPICA: Fix a long-standing bug in local cache
Since 20060317, the pointer to next object is the first element in
 its common header.  Remove bogus LinkOffset from ACPI_MEMORY_LIST
 and directly use NextObject.

Signed-off-by: Jung-uk Kim <jkim@FreeBSD.org>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-12 00:45:04 +01:00
Lv Zheng 98b5c9934c ACPICA: iASL/Disassembler: Add support for MTMR table
MTMR table is used in the recent ACPI BIOS enabled Intel MID
platforms.  The format of this table has been defined in the
"Simple Firmware Interface Specification" except it uses GAS
instead of 64-bit values for address fields.  This patch introduces
MTMR table support into ACPICA.  Lv Zheng.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-12 00:45:04 +01:00
Lv Zheng 25c0330aa6 ACPICA: iASL/Disassembler: Add support for VRTC table
VRTC is used in Intel MID platforms as a replacement of the
traditional x86 RTC. VRTC table can be found in the recent ACPI
BIOS enabled Intel MID platforms. The format of this table has
been defined in the "Simple Firmware Interface Specification"
except it uses GAS instead of 64-bit values for address fields.
This patch introduces VRTC table support into ACPICA.  Lv Zheng.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-12 00:45:03 +01:00
Lv Zheng 8c2809144a ACPICA: Update RASF table definition
Update to reflect final ACPI 5.0 changes.  Lv Zheng.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-12 00:45:03 +01:00
Konrad Rzeszutek Wilk c705c78c0d acpi: Export the acpi_processor_get_performance_info
The git commit d5aaffa9dd
(cpufreq: handle cpufreq being disabled for all exported function)
tightens the cpufreq API by returning errors when disable_cpufreq()
had been called.

The problem we are hitting is that the module xen-acpi-processor which
uses the ACPI's functions: acpi_processor_register_performance,
acpi_processor_preregister_performance, and acpi_processor_notify_smm
fails at acpi_processor_register_performance with -22.

Note that earlier during bootup in arch/x86/xen/setup.c there is also
an call to cpufreq's API: disable_cpufreq().

This is b/c we want the Linux kernel to parse the ACPI data, but leave
the cpufreq decisions to the hypervisor.

In v3.9 all the checks that d5aaffa9dd
added are now hit and the calls to cpufreq_register_notifier will now
fail. This means that acpi_processor_ppc_init ends up printing:

"Warning: Processor Platform Limit not supported"

and the acpi_processor_ppc_status is not set.

The repercussions of that is that the call to
acpi_processor_register_performance fails right away at:

	if (!(acpi_processor_ppc_status & PPC_REGISTERED))

and we don't progress any further on parsing and extracting the _P*
objects.

The only reason the Xen code called that function was b/c it was
exported and the only way to gather the P-states. But we can also
just make acpi_processor_get_performance_info be exported and not
use acpi_processor_register_performance. This patch does so.

Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-03-06 10:00:34 -05:00
Rafael J. Wysocki 3f8055c358 ACPI / hotplug: Introduce user space interface for hotplug profiles
Introduce user space interface for manipulating hotplug profiles
associated with ACPI scan handlers.

The interface consists of sysfs directories under
/sys/firmware/acpi/hotplug/, one for each hotplug profile, containing
an attribute allowing user space to manipulate the enabled field of
the corresponding profile.  Namely, switching the enabled attribute
from '0' to '1' will cause the common hotplug notify handler to be
installed for all ACPI namespace objects representing devices matching
the scan handler associated with the given hotplug profile (and
analogously for the converse switch).

Drivers willing to use the new user space interface should add their
ACPI scan handlers with the help of new funtion
acpi_scan_add_handler_with_hotplug().

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
Tested-by: Toshi Kani <toshi.kani@hp.com>
2013-03-04 14:25:32 +01:00
Rafael J. Wysocki a33ec399e9 ACPI / scan: Introduce common code for ACPI-based device hotplug
Multiple drivers handling hotplug-capable ACPI device nodes install
notify handlers covering the same types of events in a very similar
way.  Moreover, those handlers are installed in separate namespace
walks, although that really should be done during namespace scans
carried out by acpi_bus_scan().  This leads to substantial code
duplication, unnecessary overhead and behavior that is hard to
follow.

For this reason, introduce common code in drivers/acpi/scan.c for
handling hotplug-related notification and carrying out device
insertion and eject operations in a generic fashion, such that it
may be used by all of the relevant drivers in the future.  To cover
the existing differences between those drivers introduce struct
acpi_hotplug_profile for representing collections of hotplug
settings associated with different ACPI scan handlers that can be
used by the drivers to make the common code reflect their current
behavior.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
Tested-by: Toshi Kani <toshi.kani@hp.com>
2013-03-04 14:25:32 +01:00
Rafael J. Wysocki 924144818c ACPI / glue: Drop .find_bridge() callback from struct acpi_bus_type
After PCI and USB have stopped using the .find_bridge() callback in
struct acpi_bus_type, the only remaining user of it is SATA, but SATA
only pretends to be a user, because it points that callback to a stub
always returning -ENODEV.

For this reason, drop the SATA's dummy .find_bridge() callback and
remove .find_bridge(), which is not used any more, from struct
acpi_bus_type entirely.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Jeff Garzik <jgarzik@pobox.com>
2013-03-04 14:23:40 +01:00
Rafael J. Wysocki 53540098b2 ACPI / glue: Add .match() callback to struct acpi_bus_type
USB uses the .find_bridge() callback from struct acpi_bus_type
incorrectly, because as a result of the way it is used by USB every
device in the system that doesn't have a bus type or parent is
passed to usb_acpi_find_device() for inspection.

What USB actually needs, though, is to call usb_acpi_find_device()
for USB ports that don't have a bus type defined, but have
usb_port_device_type as their device type, as well as for USB
devices.

To fix that replace the struct bus_type pointer in struct
acpi_bus_type used for matching devices to specific subsystems
with a .match() callback to be used for this purpose and update
the users of struct acpi_bus_type, including USB, accordingly.
Define the .match() callback routine for USB, usb_acpi_bus_match(),
in such a way that it will cover both USB devices and USB ports
and remove the now redundant .find_bridge() callback pointer from
usb_acpi_bus.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Jeff Garzik <jgarzik@pobox.com>
2013-03-04 14:23:40 +01:00
Linus Torvalds ad6c2c2eb3 Merge branch 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac
Pull EDAC fixes and ghes-edac from Mauro Carvalho Chehab:
 "For:

   - Some fixes at edac drivers (i7core_edac, sb_edac, i3200_edac);
   - error injection support for i5100, when EDAC debug is enabled;
   - fix edac when it is loaded builtin (early init for the subsystem);
   - a "Firmware First" EDAC driver, allowing ghes to report errors via
     EDAC (ghes-edac).

  With regards to ghes-edac, this fixes a longstanding BZ at Red Hat
  that happens with Nehalem and Sandy Bridge CPUs: when both GHES and
  i7core_edac or sb_edac are running, the error reports are
  unpredictable, as both BIOS and OS race to access the registers.  With
  ghes-edac, the EDAC core will refuse to register any other concurrent
  memory error driver.

  This patchset moves the ghes struct definitions to a separate header
  file (include/acpi/ghes.h) and adds 3 hooks at apei/ghes.c to
  register/unregister and to report errors via ghes-edac.  Those changes
  were acked by ghes driver maintainer (Huang)."

* 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: (30 commits)
  i5100_edac: convert to use simple_open()
  ghes_edac: fix to use list_for_each_entry_safe() when delete list items
  ghes_edac: Fix RAS tracing
  ghes_edac: Make it compliant with UEFI spec 2.3.1
  ghes_edac: Improve driver's printk messages
  ghes_edac: Don't credit the same memory dimm twice
  ghes_edac: do a better job of filling EDAC DIMM info
  ghes_edac: add support for reporting errors via EDAC
  ghes_edac: Register at EDAC core the BIOS report
  ghes: add the needed hooks for EDAC error report
  ghes: move structures/enum to a header file
  edac: add support for error type "Info"
  edac: add support for raw error reports
  edac: reduce stack pressure by using a pre-allocated buffer
  edac: lock module owner to avoid error report conflicts
  edac: remove proc_name from mci structure
  edac: add a new memory layer type
  edac: initialize the core earlier
  edac: better report error conditions in debug mode
  i5100_edac: Remove two checkpatch warnings
  ...
2013-02-28 20:42:33 -08:00
Linus Torvalds 556f12f602 PCI changes for the v3.9 merge window:
Host bridge hotplug
     - Major overhaul of ACPI host bridge add/start (Rafael Wysocki, Yinghai Lu)
     - Major overhaul of PCI/ACPI binding (Rafael Wysocki, Yinghai Lu)
     - Split out ACPI host bridge and ACPI PCI device hotplug (Yinghai Lu)
     - Stop caching _PRT and make independent of bus numbers (Yinghai Lu)
 
   PCI device hotplug
     - Clean up cpqphp dead code (Sasha Levin)
     - Disable ARI unless device and upstream bridge support it (Yijing Wang)
     - Initialize all hot-added devices (not functions 0-7) (Yijing Wang)
 
   Power management
     - Don't touch ASPM if disabled (Joe Lawrence)
     - Fix ASPM link state management (Myron Stowe)
 
   Miscellaneous
     - Fix PCI_EXP_FLAGS accessor (Alex Williamson)
     - Disable Bus Master in pci_device_shutdown (Konstantin Khlebnikov)
     - Document hotplug resource and MPS parameters (Yijing Wang)
     - Add accessor for PCIe capabilities (Myron Stowe)
     - Drop pciehp suspend/resume messages (Paul Bolle)
     - Make pci_slot built-in only (not a module) (Jiang Liu)
     - Remove unused PCI/ACPI bind ops (Jiang Liu)
     - Removed used pci_root_bus (Bjorn Helgaas)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRKS3hAAoJEFmIoMA60/r8xxoP/j1CS4oCZAnBIVT9fKBkis+/
 CENcfHIUKj6J9iMfJEVvqBELvqaLqtpeNwAGMcGPxV7VuT3K1QumChfaTpRDP0HC
 VDRmrjcmfenEK+YPOG7acsrTyqk2wjpLOyu9MKRxtC5u7tF6376KQpkEFpO4haL4
 eUHTxfE76OkrPBSvx3+PUSf6jqrvrNbjX8K6HdDVVlm3sVAQKmYJU/Wphv2NPOqa
 CAMyCzEGybFjr8hDRwvWgr+06c718GMwQUbnrPdHXAe7lMNMrN/XVBmU9ABN3Aas
 icd3lrDs+yPObgcO/gT8+sAZErCtdJ9zuHGYHdYpRbIQj/5JT4TMk7tw/Bj7vKY9
 Mqmho9GR5YmYTRN9f1r+2n5AQ/KYWXJDrRNOnt5/ys5BOM3vwJ7WJ902zpSwtFQp
 nLX+oD/hLfzpnoIQGDuBAoAXp2Kam3XWRgVvG78buRNrPj+kUzimk14a8qQeY+CB
 El6UKuwi5Uv/qgs1gAqqjmZmsAkon2DnsRZa6Fl8NTkDlis7LY4gp9OU38ySFpB+
 PhCmRyCZmDDqTVtwj6XzR3nPQ5LBSbvsTfgMxYMIUSXHa06tyb2q5p4mEIas0OmU
 RKaP5xQqZuTgD8fbdYrx0xgSrn7JHt/j/X//Qs6unlLCWhlpm3LjJZKxyw2FwBGr
 o4Lci+PiBh3MowCrju9D
 =ER3b
 -----END PGP SIGNATURE-----

Merge tag 'pci-v3.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI changes from Bjorn Helgaas:
 "Host bridge hotplug
    - Major overhaul of ACPI host bridge add/start (Rafael Wysocki, Yinghai Lu)
    - Major overhaul of PCI/ACPI binding (Rafael Wysocki, Yinghai Lu)
    - Split out ACPI host bridge and ACPI PCI device hotplug (Yinghai Lu)
    - Stop caching _PRT and make independent of bus numbers (Yinghai Lu)

  PCI device hotplug
    - Clean up cpqphp dead code (Sasha Levin)
    - Disable ARI unless device and upstream bridge support it (Yijing Wang)
    - Initialize all hot-added devices (not functions 0-7) (Yijing Wang)

  Power management
    - Don't touch ASPM if disabled (Joe Lawrence)
    - Fix ASPM link state management (Myron Stowe)

  Miscellaneous
    - Fix PCI_EXP_FLAGS accessor (Alex Williamson)
    - Disable Bus Master in pci_device_shutdown (Konstantin Khlebnikov)
    - Document hotplug resource and MPS parameters (Yijing Wang)
    - Add accessor for PCIe capabilities (Myron Stowe)
    - Drop pciehp suspend/resume messages (Paul Bolle)
    - Make pci_slot built-in only (not a module) (Jiang Liu)
    - Remove unused PCI/ACPI bind ops (Jiang Liu)
    - Removed used pci_root_bus (Bjorn Helgaas)"

* tag 'pci-v3.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (51 commits)
  PCI/ACPI: Don't cache _PRT, and don't associate them with bus numbers
  PCI: Fix PCI Express Capability accessors for PCI_EXP_FLAGS
  ACPI / PCI: Make pci_slot built-in only, not a module
  PCI/PM: Clear state_saved during suspend
  PCI: Use atomic_inc_return() rather than atomic_add_return()
  PCI: Catch attempts to disable already-disabled devices
  PCI: Disable Bus Master unconditionally in pci_device_shutdown()
  PCI: acpiphp: Remove dead code for PCI host bridge hotplug
  PCI: acpiphp: Create companion ACPI devices before creating PCI devices
  PCI: Remove unused "rc" in virtfn_add_bus()
  PCI: pciehp: Drop suspend/resume ENTRY messages
  PCI/ASPM: Don't touch ASPM if forcibly disabled
  PCI/ASPM: Deallocate upstream link state even if device is not PCIe
  PCI: Document MPS parameters pci=pcie_bus_safe, pci=pcie_bus_perf, etc
  PCI: Document hpiosize= and hpmemsize= resource reservation parameters
  PCI: Use PCI Express Capability accessor
  PCI: Introduce accessor to retrieve PCIe Capabilities Register
  PCI: Put pci_dev in device tree as early as possible
  PCI: Skip attaching driver in device_add()
  PCI: acpiphp: Keep driver loaded even if no slots found
  ...
2013-02-25 21:18:18 -08:00
Mauro Carvalho Chehab 21480547c8 ghes: add the needed hooks for EDAC error report
In order to allow reporting errors via EDAC, add hooks for:

1) register an EDAC driver;
2) unregister an EDAC driver;
3) report errors via EDAC.

As the EDAC driver will need to access the ghes structure, adds it
as one of the parameters for ghes_do_proc.

Acked-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-25 19:41:51 -03:00
Mauro Carvalho Chehab 40e0641538 ghes: move structures/enum to a header file
As a ghes_edac driver will need to access ghes structures, in order
to properly handle the errors, move those structures to a separate
header file. No functional changes.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-21 14:16:28 -03:00
Bjorn Helgaas 018ba0a6ef Merge branch 'pci/yinghai-root-bus-hotplug' into next
* pci/yinghai-root-bus-hotplug:
  PCI/ACPI: Don't cache _PRT, and don't associate them with bus numbers
2013-02-19 11:42:17 -07:00
Yinghai Lu 181380b702 PCI/ACPI: Don't cache _PRT, and don't associate them with bus numbers
Previously, we cached _PRT (PCI routing table, ACPI 5.0 sec 6.2.12)
contents and associated each _PRT entry with a PCI bus number.  The bus
number association means dependencies on PCI device enumeration and bus
number assignment, as well as on the PCI/ACPI binding process.

After 4f535093cf ("PCI: Put pci_dev in device tree as early as possible"),
these dependencies caused the IRQ issues reported by Peter:

    pci 0000:00:1e.0: PCI bridge to [bus 09] (subtractive decode)
    pci 0000:00:1e.0: can't derive routing for PCI INT A
    snd_ctxfi 0000:09:02.0: PCI INT A: no GSI - using ISA IRQ 5
    irq 18: nobody cared (try booting with the "irqpoll" option)

This patch removes _PRT caching.  Instead, we evaluate _PRT as needed
in the pci_enable_device() path.  This also removes the dependency on
PCI bus numbers: we can simply look at the _PRT associated with each
bridge as we walk upstream toward the root.

[bhelgaas: changelog]
Reference: https://bugzilla.kernel.org/show_bug.cgi?id=53561
Reported-and-tested-by: Peter Hurley <peter@hurleysoftware.com>
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-02-16 11:58:34 -07:00
Rafael J. Wysocki e8f71df723 Merge branch 'acpi-cleanup'
* acpi-cleanup: (21 commits)
  ACPI / hotplug: Fix concurrency issues and memory leaks
  ACPI: Remove the use of CONFIG_ACPI_CONTAINER_MODULE
  ACPI / scan: Full transition to D3cold in acpi_device_unregister()
  ACPI / scan: Make acpi_bus_hot_remove_device() acquire the scan lock
  ACPI: Drop the container.h header file
  ACPI / Documentation: refer to correct file for acpi_platform_device_ids[] table
  ACPI / scan: Make container driver use struct acpi_scan_handler
  ACPI / scan: Remove useless #ifndef from acpi_eject_store()
  ACPI: Unbind ACPI drv when probe failed
  ACPI: sysfs eject support for ACPI scan handlers
  ACPI / scan: Follow priorities of IDs when matching scan handlers
  ACPI / PCI: pci_slot: replace printk(KERN_xxx) with pr_xxx()
  ACPI / dock: Fix acpi_bus_get_device() check in drivers/acpi/dock.c
  ACPI / scan: Clean up acpi_bus_get_parent()
  ACPI / platform: Use struct acpi_scan_handler for creating devices
  ACPI / PCI: Make PCI IRQ link driver use struct acpi_scan_handler
  ACPI / PCI: Make PCI root driver use struct acpi_scan_handler
  ACPI / scan: Introduce struct acpi_scan_handler
  ACPI / scan: Make scanning of fixed devices follow the general scheme
  ACPI: Drop device start operation that is not used
  ...
2013-02-15 13:58:30 +01:00
Rafael J. Wysocki 3757b94802 ACPI / hotplug: Fix concurrency issues and memory leaks
This changeset is aimed at fixing a few different but related
problems in the ACPI hotplug infrastructure.

First of all, since notify handlers may be run in parallel with
acpi_bus_scan(), acpi_bus_trim() and acpi_bus_hot_remove_device()
and some of them are installed for ACPI handles that have no struct
acpi_device objects attached (i.e. before those objects are created),
those notify handlers have to take acpi_scan_lock to prevent races
from taking place (e.g. a struct acpi_device is found to be present
for the given ACPI handle, but right after that it is removed by
acpi_bus_trim() running in parallel to the given notify handler).
Moreover, since some of them call acpi_bus_scan() and
acpi_bus_trim(), this leads to the conclusion that acpi_scan_lock
should be acquired by the callers of these two funtions rather by
these functions themselves.

For these reasons, make all notify handlers that can handle device
addition and eject events take acpi_scan_lock and remove the
acpi_scan_lock locking from acpi_bus_scan() and acpi_bus_trim().
Accordingly, update all of their users to make sure that they
are always called under acpi_scan_lock.

Furthermore, since eject operations are carried out asynchronously
with respect to the notify events that trigger them, with the help
of acpi_bus_hot_remove_device(), even if notify handlers take the
ACPI scan lock, it still is possible that, for example,
acpi_bus_trim() will run between acpi_bus_hot_remove_device() and
the notify handler that scheduled its execution and that
acpi_bus_trim() will remove the device node passed to
acpi_bus_hot_remove_device() for ejection.  In that case, the struct
acpi_device object obtained by acpi_bus_hot_remove_device() will be
invalid and not-so-funny things will ensue.  To protect agaist that,
make the users of acpi_bus_hot_remove_device() run get_device() on
ACPI device node objects that are about to be passed to it and make
acpi_bus_hot_remove_device() run put_device() on them and check if
their ACPI handles are not NULL (make acpi_device_unregister() clear
the device nodes' ACPI handles for that check to work).

Finally, observe that acpi_os_hotplug_execute() actually can fail,
in which case its caller ought to free memory allocated for the
context object to prevent leaks from happening.  It also needs to
run put_device() on the device node that it ran get_device() on
previously in that case.  Modify the code accordingly.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
2013-02-13 14:36:47 +01:00
Rafael J. Wysocki 87d4a4da73 ACPI: Drop the container.h header file
The include/acpi/container.h only contains a definition of a
structure that is not used any more, so drop it entirely.

Similar change was proposed earlier by Toshi Kani.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
2013-02-13 13:43:02 +01:00
Rafael J. Wysocki a9834cb205 Merge branch 'acpi-pm'
* acpi-pm: (35 commits)
  ACPI / PM: Handle missing _PSC in acpi_bus_update_power()
  ACPI / PM: Do not power manage devices in unknown initial states
  ACPI / PM: Fix acpi_bus_get_device() check in drivers/acpi/device_pm.c
  ACPI / PM: Fix /proc/acpi/wakeup for devices w/o bus or parent
  ACPI / PM: Fix consistency check for power resources during resume
  ACPI / PM: Expose lists of device power resources to user space
  sysfs: Functions for adding/removing symlinks to/from attribute groups
  ACPI / PM: Expose current status of ACPI power resources
  ACPI / PM: Expose power states of ACPI devices to user space
  ACPI / scan: Prevent device add uevents from racing with user space
  ACPI / PM: Fix device power state value after transitions to D3cold
  ACPI / PM: Use string "D3cold" to represent ACPI_STATE_D3_COLD
  ACPI / PM: Sanitize checks in acpi_power_on_resources()
  ACPI / PM: Always evaluate _PSn after setting power resources
  ACPI / PM: Introduce helper for executing _PSn methods
  ACPI / PM: Make acpi_bus_init_power() more robust
  ACPI / PM: Fix build for unusual combination of Kconfig options
  ACPI / PM: remove leading whitespace from #ifdef
  ACPI / PM: Consolidate suspend-specific and hibernate-specific code
  ACPI / PM: Move device power management functions to device_pm.c
  ...
2013-02-11 13:20:56 +01:00
Rafael J. Wysocki 48694bdb38 Merge branch 'acpica'
* acpica: (56 commits)
  ACPICA: Update version to 20130117
  ACPICA: Update predefined info table for _MLS method
  ACPICA: Remove some extraneous newlines in ACPI_ERROR type calls
  ACPICA: iASL/Disassembler: Add option to ignore NOOP opcodes/operators
  ACPICA: AcpiGetSleepTypeData: Allow \_Sx to return either 1 or 2 integers
  ACPICA: Update ACPICA copyrights to 2013
  ACPICA: Update predefined info table
  ACPICA: Cleanup table handler naming conflicts.
  ACPICA: Source restructuring: split large files into 8 new files.
  ACPICA: Cleanup PM_TIMER_FREQUENCY definition.
  ACPICA: Cleanup ACPI_DEBUG_PRINT macros to fix potential build breakages.
  ACPICA: Update version to 20121220.
  ACPICA: Interpreter: Fix Store() when implicit conversion is not possible.
  ACPICA: Resources: Split interrupt share/wake bits into two fields.
  ACPICA: Resources: Support for ACPI 5 wake bit in ExtendedInterrupt descriptor.
  ACPICA: Interpreter: Add warning if 64-bit constant appears in 32-bit table.
  ACPICA: Update ACPICA initialization messages.
  ACPICA: Namespace: Eliminate dot...dot output during initialization.
  ACPICA: Resource manager: Add support for ACPI 5 wake bit in IRQ descriptor.
  ACPICA: Fix possible memory leak in dispatcher error path.
  ...
2013-02-11 13:20:33 +01:00
Rafael J. Wysocki ca589f9469 ACPI / scan: Introduce struct acpi_scan_handler
Introduce struct acpi_scan_handler for representing objects that
will do configuration tasks depending on ACPI device nodes'
hardware IDs (HIDs).

Currently, those tasks are done either directly by the ACPI namespace
scanning code or by ACPI device drivers designed specifically for
this purpose.  None of the above is desirable, however, because
doing that directly in the namespace scanning code makes that code
overly complicated and difficult to follow and doing that in
"special" device drivers leads to a great deal of confusion about
their role and to confusing interactions with the driver core (for
example, sysfs directories are created for those drivers, but they
are completely unnecessary and only increase the kernel's memory
footprint in vain).

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
2013-01-30 14:27:29 +01:00
Rafael J. Wysocki 8b4e2fa4ff Merge branch 'acpi-lpss' into acpi-cleanup
The following commits depend on the 'acpi-lpss' material.
2013-01-29 13:59:00 +01:00
Rafael J. Wysocki 64e94e7e0f Merge branch 'acpi-scan' into acpi-cleanup
The following commits depend on the 'acpi-scan' material.
2013-01-29 13:58:34 +01:00
Rafael J. Wysocki 8a78cf70fa Merge branch 'acpi-pm' into acpi-cleanup
The following commits depend on the 'acpi-pm' material.
2013-01-29 13:56:05 +01:00
Bjorn Helgaas 939de1d69c Merge branch 'pci/yinghai-root-bus-hotplug' into next
* pci/yinghai-root-bus-hotplug:
  PCI: Put pci_dev in device tree as early as possible
  PCI: Skip attaching driver in device_add()
  PCI: acpiphp: Keep driver loaded even if no slots found
  PCI/ACPI: Print info if host bridge notify handler installation fails
  PCI: acpiphp: Move host bridge hotplug to pci_root.c
  PCI/ACPI: acpiphp: Rename alloc_acpiphp_hp_work() to alloc_acpi_hp_work()
  PCI: Make device create/destroy logic symmetric
  PCI: Fix reference count leak in pci_dev_present()
  PCI: Set pci_dev dev_node early so IOAPIC irq_descs are allocated locally
  PCI: Add root bus children dev's res to fail list
  PCI: acpiphp: Add is_hotplug_bridge detection

Conflicts:
	drivers/pci/pci.h
2013-01-26 17:35:58 -07:00
Bjorn Helgaas fb455792d9 Merge branch 'pci/acpi-scan2' into next
* pci/acpi-scan2:
  ACPI / scan: Drop acpi_bus_add() and use acpi_bus_scan() instead
  ACPI: update ej_event interface to take acpi_device
  ACPI / scan: Add second pass to acpi_bus_trim()
  ACPI / scan: Change the implementation of acpi_bus_trim()
  ACPI / scan: Drop the second argument of acpi_bus_trim()
  ACPI / scan: Drop the second argument of acpi_device_unregister()
  ACPI: Remove the ops field from struct acpi_device
  ACPI: remove unused acpi_op_bind and acpi_op_unbind
  ACPI / scan: Fix check of device_attach() return value.
2013-01-26 17:35:05 -07:00
Rafael J. Wysocki 09212fddc8 ACPI: Drop device start operation that is not used
The ACPI device start operation, acpi_op_start, is never used, so
drop it.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Toshi Kani <toshi.kani@hp.com>
2013-01-26 00:37:24 +01:00
Rafael J. Wysocki 51fac8388a ACPI: Remove useless type argument of driver .remove() operation
The second argument of ACPI driver .remove() operation is only used
by the ACPI processor driver and the value passed to that driver
through it is always available from the given struct acpi_device
object's removal_type field.  For this reason, the second ACPI driver
.remove() argument is in fact useless, so drop it.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jiang Liu <jiang.liu@huawei.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
2013-01-26 00:37:24 +01:00
Rafael J. Wysocki bfee26dba0 ACPI / scan: Make it clear that acpi_bus_trim() cannot fail
Since acpi_bus_trim() cannot fail, change its definition to a void
function, so that its callers don't check the return value in vain
and update the callers.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
2013-01-26 00:27:44 +01:00
Yinghai Lu 92d8aff3a3 PCI/ACPI: acpiphp: Rename alloc_acpiphp_hp_work() to alloc_acpi_hp_work()
Will need to use it for PCI root bridge hotplug support, so rename
*acpiphp* to *acpi* and move to osc.c.  Also make kacpi_hotplug_wq static
after that.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
CC: Len Brown <lenb@kernel.org>
CC: linux-acpi@vger.kernel.org
2013-01-25 14:43:22 -07:00
Bob Moore 217195343d ACPICA: Update version to 20130117
Version 20130117.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-25 13:30:48 +01:00
Bob Moore 25f044e645 ACPICA: Update ACPICA copyrights to 2013
Includes all source headers and signons for the various tools.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-25 13:30:47 +01:00
Rafael J. Wysocki b1c0f99bfb ACPI / PM: Expose current status of ACPI power resources
Since ACPI power resources are going to be used more extensively on
new hardware platforms, it becomes necessary for user space (powertop
in particular) to observe some properties of those resources for
diagnostics purposes.

For this reason, expose the current status of each ACPI power
resource to user space via sysfs by adding a new resource_in_use
attribute to the sysfs directory representing the given power
resource.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-24 12:50:09 +01:00
Rafael J. Wysocki 9ce4e60711 ACPI / PM: Move device power management functions to device_pm.c
Move ACPI device power management functions from drivers/acpi/bus.c
to drivers/acpi/device_pm.c.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-19 22:09:22 +01:00