* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (28 commits)
trivial: Update my email address
trivial: NULL noise: drivers/mtd/tests/mtd_*test.c
trivial: NULL noise: drivers/media/dvb/frontends/drx397xD_fw.h
trivial: Fix misspelling of "Celsius".
trivial: remove unused variable 'path' in alloc_file()
trivial: fix a pdlfush -> pdflush typo in comment
trivial: jbd header comment typo fix for JBD_PARANOID_IOFAIL
trivial: wusb: Storage class should be before const qualifier
trivial: drivers/char/bsr.c: Storage class should be before const qualifier
trivial: h8300: Storage class should be before const qualifier
trivial: fix where cgroup documentation is not correctly referred to
trivial: Give the right path in Documentation example
trivial: MTD: remove EOL from MODULE_DESCRIPTION
trivial: Fix typo in bio_split()'s documentation
trivial: PWM: fix of #endif comment
trivial: fix typos/grammar errors in Kconfig texts
trivial: Fix misspelling of firmware
trivial: cgroups: documentation typo and spelling corrections
trivial: Update contact info for Jochen Hein
trivial: fix typo "resgister" -> "register"
...
Add a function to install a monitor on the page lock waitqueue for a particular
page, thus allowing the page being unlocked to be detected.
This is used by CacheFiles to detect read completion on a page in the backing
filesystem so that it can then copy the data to the waiting netfs page.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Daire Byrne <Daire.Byrne@framestore.com>
Recruit a page flag to aid in cache management. The following extra flag is
defined:
(1) PG_fscache (PG_private_2)
The marked page is backed by a local cache and is pinning resources in the
cache driver.
If PG_fscache is set, then things that checked for PG_private will now also
check for that. This includes things like truncation and page invalidation.
The function page_has_private() had been added to make the checks for both
PG_private and PG_private_2 at the same time.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Daire Byrne <Daire.Byrne@framestore.com>
The attached patch causes read_cache_pages() to release page-private data on a
page for which add_to_page_cache() fails. If the filler function fails, then
the problematic page is left attached to the pagecache (with appropriate flags
set, one presumes) and the remaining to-be-attached pages are invalidated and
discarded. This permits pages with caching references associated with them to
be cleaned up.
The invalidatepage() address space op is called (indirectly) to do the honours.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Daire Byrne <Daire.Byrne@framestore.com>
Current mem_cgroup_cache_charge is a bit complicated especially
in the case of shmem's swap-in.
This patch cleans it up by using try_charge_swapin and commit_charge_swapin.
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's pointed out that swap_cgroup's message at swapon() is nonsense.
Because
* It can be calculated very easily if all necessary information is
written in Kconfig.
* It's not necessary to annoying people at every swapon().
In other view, now, memory usage per swp_entry is reduced to 2bytes from
8bytes(64bit) and I think it's reasonably small.
Reported-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Try to use CSS ID for records in swap_cgroup. By this, on 64bit machine,
size of swap_cgroup goes down to 2 bytes from 8bytes.
This means, when 2GB of swap is equipped, (assume the page size is 4096bytes)
From size of swap_cgroup = 2G/4k * 8 = 4Mbytes.
To size of swap_cgroup = 2G/4k * 2 = 1Mbytes.
Reduction is large. Of course, there are trade-offs. This CSS ID will
add overhead to swap-in/swap-out/swap-free.
But in general,
- swap is a resource which the user tend to avoid use.
- If swap is never used, swap_cgroup area is not used.
- Reading traditional manuals, size of swap should be proportional to
size of memory. Memory size of machine is increasing now.
I think reducing size of swap_cgroup makes sense.
Note:
- ID->CSS lookup routine has no locks, it's under RCU-Read-Side.
- memcg can be obsolete at rmdir() but not freed while refcnt from
swap_cgroup is available.
Changelog v4->v5:
- reworked on to memcg-charge-swapcache-to-proper-memcg.patch
Changlog ->v4:
- fixed not configured case.
- deleted unnecessary comments.
- fixed NULL pointer bug.
- fixed message in dmesg.
[nishimura@mxp.nes.nec.co.jp: css_tryget can be called twice in !PageCgroupUsed case]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Paul Menage <menage@google.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
memcg_test.txt says at 4.1:
This swap-in is one of the most complicated work. In do_swap_page(),
following events occur when pte is unchanged.
(1) the page (SwapCache) is looked up.
(2) lock_page()
(3) try_charge_swapin()
(4) reuse_swap_page() (may call delete_swap_cache())
(5) commit_charge_swapin()
(6) swap_free().
Considering following situation for example.
(A) The page has not been charged before (2) and reuse_swap_page()
doesn't call delete_from_swap_cache().
(B) The page has not been charged before (2) and reuse_swap_page()
calls delete_from_swap_cache().
(C) The page has been charged before (2) and reuse_swap_page() doesn't
call delete_from_swap_cache().
(D) The page has been charged before (2) and reuse_swap_page() calls
delete_from_swap_cache().
memory.usage/memsw.usage changes to this page/swp_entry will be
Case (A) (B) (C) (D)
Event
Before (2) 0/ 1 0/ 1 1/ 1 1/ 1
===========================================
(3) +1/+1 +1/+1 +1/+1 +1/+1
(4) - 0/ 0 - -1/ 0
(5) 0/-1 0/ 0 -1/-1 0/ 0
(6) - 0/-1 - 0/-1
===========================================
Result 1/ 1 1/ 1 1/ 1 1/ 1
In any cases, charges to this page should be 1/ 1.
In case of (D), mem_cgroup_try_get_from_swapcache() returns NULL
(because lookup_swap_cgroup() returns NULL), so "+1/+1" at (3) means
charges to the memcg("foo") to which the "current" belongs.
OTOH, "-1/0" at (4) and "0/-1" at (6) means uncharges from the memcg("baa")
to which the page has been charged.
So, if the "foo" and "baa" is different(for example because of task move),
this charge will be moved from "baa" to "foo".
I think this is an unexpected behavior.
This patch fixes this by modifying mem_cgroup_try_get_from_swapcache()
to return the memcg to which the swapcache has been charged if PCG_USED bit
is set.
IIUC, checking PCG_USED bit of swapcache is safe under page lock.
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, mem_cgroup_calc_mapped_ratio() is unused at all. it can be
removed and KAMEZAWA-san suggested it.
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add RSS and swap to OOM output from memcg
Display memcg values like failcnt, usage and limit when an OOM occurs due
to memcg.
Thanks to Johannes Weiner, Li Zefan, David Rientjes, Kamezawa Hiroyuki,
Daisuke Nishimura and KOSAKI Motohiro for review.
Sample output
-------------
Task in /a/x killed as a result of limit of /a
memory: usage 1048576kB, limit 1048576kB, failcnt 4183
memory+swap: usage 1400964kB, limit 9007199254740991kB, failcnt 0
[akpm@linux-foundation.org: compilation fix]
[akpm@linux-foundation.org: fix kerneldoc and whitespace]
[akpm@linux-foundation.org: add printk facility level]
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch tries to fix OOM Killer problems caused by hierarchy.
Now, memcg itself has OOM KILL function (in oom_kill.c) and tries to
kill a task in memcg.
But, when hierarchy is used, it's broken and correct task cannot
be killed. For example, in following cgroup
/groupA/ hierarchy=1, limit=1G,
01 nolimit
02 nolimit
All tasks' memory usage under /groupA, /groupA/01, groupA/02 is limited to
groupA's 1Gbytes but OOM Killer just kills tasks in groupA.
This patch provides makes the bad process be selected from all tasks
under hierarchy. BTW, currently, oom_jiffies is updated against groupA
in above case. oom_jiffies of tree should be updated.
To see how oom_jiffies is used, please check mem_cgroup_oom_called()
callers.
[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: const fix]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As pointed out, shrinking memcg's limit should return -EBUSY after
reasonable retries. This patch tries to fix the current behavior of
shrink_usage.
Before looking into "shrink should return -EBUSY" problem, we should fix
hierarchical reclaim code. It compares current usage and current limit,
but it only makes sense when the kernel reclaims memory because hit
limits. This is also a problem.
What this patch does are.
1. add new argument "shrink" to hierarchical reclaim. If "shrink==true",
hierarchical reclaim returns immediately and the caller checks the kernel
should shrink more or not.
(At shrinking memory, usage is always smaller than limit. So check for
usage < limit is useless.)
2. For adjusting to above change, 2 changes in "shrink"'s retry path.
2-a. retry_count depends on # of children because the kernel visits
the children under hierarchy one by one.
2-b. rather than checking return value of hierarchical_reclaim's progress,
compares usage-before-shrink and usage-after-shrink.
If usage-before-shrink <= usage-after-shrink, retry_count is
decremented.
Reported-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Clean up memory.stat file routine and show "total" hierarchical stat.
This patch does
- renamed get_all_zonestat to be get_local_zonestat.
- remove old mem_cgroup_stat_desc, which is only for per-cpu stat.
- add mcs_stat to cover both of per-cpu/per-lru stat.
- add "total" stat of hierarchy (*)
- add a callback system to scan all memcg under a root.
== "total" is added.
[kamezawa@localhost ~]$ cat /opt/cgroup/xxx/memory.stat
cache 0
rss 0
pgpgin 0
pgpgout 0
inactive_anon 0
active_anon 0
inactive_file 0
active_file 0
unevictable 0
hierarchical_memory_limit 50331648
hierarchical_memsw_limit 9223372036854775807
total_cache 65536
total_rss 192512
total_pgpgin 218
total_pgpgout 155
total_inactive_anon 0
total_active_anon 135168
total_inactive_file 61440
total_active_file 4096
total_unevictable 0
==
(*) maybe the user can do calc hierarchical stat by his own program
in userland but if it can be written in clean way, it's worth to be
shown, I think.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Assigning CSS ID for each memcg and use css_get_next() for scanning hierarchy.
Assume folloing tree.
group_A (ID=3)
/01 (ID=4)
/0A (ID=7)
/02 (ID=10)
group_B (ID=5)
and task in group_A/01/0A hits limit at group_A.
reclaim will be done in following order (round-robin).
group_A(3) -> group_A/01 (4) -> group_A/01/0A (7) -> group_A/02(10)
-> group_A -> .....
Round robin by ID. The last visited cgroup is recorded and restart
from it when it start reclaim again.
(More smart algorithm can be implemented..)
No cgroup_mutex or hierarchy_mutex is required.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In following situation, with memory subsystem,
/groupA use_hierarchy==1
/01 some tasks
/02 some tasks
/03 some tasks
/04 empty
When tasks under 01/02/03 hit limit on /groupA, hierarchical reclaim
is triggered and the kernel walks tree under groupA. In this case,
rmdir /groupA/04 fails with -EBUSY frequently because of temporal
refcnt from the kernel.
In general. cgroup can be rmdir'd if there are no children groups and
no tasks. Frequent fails of rmdir() is not useful to users.
(And the reason for -EBUSY is unknown to users.....in most cases)
This patch tries to modify above behavior, by
- retries if css_refcnt is got by someone.
- add "return value" to pre_destroy() and allows subsystem to
say "we're really busy!"
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It is a fairly common operation to have a pointer to a work and to need a
pointer to the delayed work it is contained in. In particular, all
delayed works which want to rearm themselves will have to do that. So it
would seem fair to offer a helper function for this operation.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Greg KH <greg@kroah.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The calculation of the value nr in do_xip_mapping_read is incorrect. If
the copy required more than one iteration in the do while loop the copies
variable will be non-zero. The maximum length that may be passed to the
call to copy_to_user(buf+copied, xip_mem+offset, nr) is len-copied but the
check only compares against (nr > len).
This bug is the cause for the heap corruption Carsten has been chasing
for so long:
*** glibc detected *** /bin/bash: free(): invalid next size (normal): 0x00000000800e39f0 ***
======= Backtrace: =========
/lib64/libc.so.6[0x200000b9b44]
/lib64/libc.so.6(cfree+0x8e)[0x200000bdade]
/bin/bash(free_buffered_stream+0x32)[0x80050e4e]
/bin/bash(close_buffered_stream+0x1c)[0x80050ea4]
/bin/bash(unset_bash_input+0x2a)[0x8001c366]
/bin/bash(make_child+0x1d4)[0x8004115c]
/bin/bash[0x8002fc3c]
/bin/bash(execute_command_internal+0x656)[0x8003048e]
/bin/bash(execute_command+0x5e)[0x80031e1e]
/bin/bash(execute_command_internal+0x79a)[0x800305d2]
/bin/bash(execute_command+0x5e)[0x80031e1e]
/bin/bash(reader_loop+0x270)[0x8001efe0]
/bin/bash(main+0x1328)[0x8001e960]
/lib64/libc.so.6(__libc_start_main+0x100)[0x200000592a8]
/bin/bash(clearerr+0x5e)[0x8001c092]
With this bug fix the commit 0e4a9b5928
"ext2/xip: refuse to change xip flag during remount with busy inodes" can
be removed again.
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Jared Hulbert <jaredeh@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Even though vmstat_work is marked deferrable, there are still benefits to
aligning it. For certain applications we want to keep OS jitter as low as
possible and aligning timers and work so they occur together can reduce
their overall impact.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix a number of issues with the per-MM VMA patch:
(1) Make mmap_pages_allocated an atomic_long_t, just in case this is used on
a NOMMU system with more than 2G pages. Makes no difference on a 32-bit
system.
(2) Report vma->vm_pgoff * PAGE_SIZE as a 64-bit value, not a 32-bit value,
lest it overflow.
(3) Move the allocation of the vm_area_struct slab back for fork.c.
(4) Use KMEM_CACHE() for both vm_area_struct and vm_region slabs.
(5) Use BUG_ON() rather than if () BUG().
(6) Make the default validate_nommu_regions() a static inline rather than a
#define.
(7) Make free_page_series()'s objection to pages with a refcount != 1 more
informative.
(8) Adjust the __put_nommu_region() banner comment to indicate that the
semaphore must be held for writing.
(9) Limit the number of warnings about munmaps of non-mmapped regions.
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This fixes a build failure with generic debug pagealloc:
mm/debug-pagealloc.c: In function 'set_page_poison':
mm/debug-pagealloc.c:8: error: 'struct page' has no member named 'debug_flags'
mm/debug-pagealloc.c: In function 'clear_page_poison':
mm/debug-pagealloc.c:13: error: 'struct page' has no member named 'debug_flags'
mm/debug-pagealloc.c: In function 'page_poison':
mm/debug-pagealloc.c:18: error: 'struct page' has no member named 'debug_flags'
mm/debug-pagealloc.c: At top level:
mm/debug-pagealloc.c:120: error: redefinition of 'kernel_map_pages'
include/linux/mm.h:1278: error: previous definition of 'kernel_map_pages' was here
mm/debug-pagealloc.c: In function 'kernel_map_pages':
mm/debug-pagealloc.c:122: error: 'debug_pagealloc_enabled' undeclared (first use in this function)
by fixing
- debug_flags should be in struct page
- define DEBUG_PAGEALLOC config option for all architectures
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reported-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Synopsis: if shmem_writepage calls swap_writepage directly, most shmem
swap loads benefit, and a catastrophic interaction between SLUB and some
flash storage is avoided.
shmem_writepage() has always been peculiar in making no attempt to write:
it has just transferred a shmem page from file cache to swap cache, then
let that page make its way around the LRU again before being written and
freed.
The idea was that people use tmpfs because they want those pages to stay
in RAM; so although we give it an overflow to swap, we should resist
writing too soon, giving those pages a second chance before they can be
reclaimed.
That was always questionable, and I've toyed with this patch for years;
but never had a clear justification to depart from the original design.
It became more questionable in 2.6.28, when the split LRU patches classed
shmem and tmpfs pages as SwapBacked rather than as file_cache: that in
itself gives them more resistance to reclaim than normal file pages. I
prepared this patch for 2.6.29, but the merge window arrived before I'd
completed gathering statistics to justify sending it in.
Then while comparing SLQB against SLUB, running SLUB on a laptop I'd
habitually used with SLAB, I found SLUB to run my tmpfs kbuild swapping
tests five times slower than SLAB or SLQB - other machines slower too, but
nowhere near so bad. Simpler "cp -a" swapping tests showed the same.
slub_max_order=0 brings sanity to all, but heavy swapping is too far from
normal to justify such a tuning. The crucial factor on that laptop turns
out to be that I'm using an SD card for swap. What happens is this:
By default, SLUB uses order-2 pages for shmem_inode_cache (and many other
fs inodes), so creating tmpfs files under memory pressure brings lumpy
reclaim into play. One subpage of the order is chosen from the bottom of
the LRU as usual, then the other three picked out from their random
positions on the LRUs.
In a tmpfs load, many of these pages will be ones which already passed
through shmem_writepage, so already have swap allocated. And though their
offsets on swap were probably allocated sequentially, now that the pages
are picked off at random, their swap offsets are scattered.
But the flash storage on the SD card is very sensitive to having its
writes merged: once swap is written at scattered offsets, performance
falls apart. Rotating disk seeks increase too, but less disastrously.
So: stop giving shmem/tmpfs pages a second pass around the LRU, write them
out to swap as soon as their swap has been allocated.
It's surely possible to devise an artificial load which runs faster the
old way, one whose sizing is such that the tmpfs pages on their second
pass are the ones that are wanted again, and other pages not.
But I've not yet found such a load: on all machines, under the loads I've
tried, immediate swap_writepage speeds up shmem swapping: especially when
using the SLUB allocator (and more effectively than slub_max_order=0), but
also with the others; and it also reduces the variance between runs. How
much faster varies widely: a factor of five is rare, 5% is common.
One load which might have suffered: imagine a swapping shmem load in a
limited mem_cgroup on a machine with plenty of memory. Before 2.6.29 the
swapcache was not charged, and such a load would have run quickest with
the shmem swapcache never written to swap. But now swapcache is charged,
so even this load benefits from shmem_writepage directly to swap.
Apologies for the #ifndef CONFIG_SWAP swap_writepage() stub in swap.h:
it's silly because that will never get called; but refactoring shmem.c
sensibly according to CONFIG_SWAP will be a separate task.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
try_to_free_pages() is used for the direct reclaim of up to
SWAP_CLUSTER_MAX pages when watermarks are low. The caller to
alloc_pages_nodemask() can specify a nodemask of nodes that are allowed to
be used but this is not passed to try_to_free_pages(). This can lead to
unnecessary reclaim of pages that are unusable by the caller and int the
worst case lead to allocation failure as progress was not been make where
it is needed.
This patch passes the nodemask used for alloc_pages_nodemask() to
try_to_free_pages().
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When a shrinker has a negative number of objects to delete, the symbol
name of the shrinker should be printed, not shrink_slab. This also makes
the error message slightly more informative.
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make CONFIG_UNEVICTABLE_LRU available when CONFIG_MMU=n. There's no logical
reason it shouldn't be available, and it can be used for ramfs.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Greg Ungerer <gerg@snapgear.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Enrik Berkhan <Enrik.Berkhan@ge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The mlock() facility does not exist for NOMMU since all mappings are
effectively locked anyway, so we don't make the bits available when
they're not useful.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Greg Ungerer <gerg@snapgear.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Enrik Berkhan <Enrik.Berkhan@ge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
x86 has debug_kmap_atomic_prot() which is error checking function for
kmap_atomic. It is usefull for the other architectures, although it needs
CONFIG_TRACE_IRQFLAGS_SUPPORT.
This patch exposes it to the other architectures.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change the page_mkwrite prototype to take a struct vm_fault, and return
VM_FAULT_xxx flags. There should be no functional change.
This makes it possible to return much more detailed error information to
the VM (and also can provide more information eg. virtual_address to the
driver, which might be important in some special cases).
This is required for a subsequent fix. And will also make it easier to
merge page_mkwrite() with fault() in future.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
Cc: Artem Bityutskiy <dedekind@infradead.org>
Cc: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Addresses http://bugzilla.kernel.org/show_bug.cgi?id=9838
On i386, HZ=1000, jiffies_to_clock_t() converts time in a somewhat strange
way from the user's point of view:
# echo 500 >/proc/sys/vm/dirty_writeback_centisecs
# cat /proc/sys/vm/dirty_writeback_centisecs
499
So, we have 5000 jiffies converted to only 499 clock ticks and reported
back.
TICK_NSEC = 999848
ACTHZ = 256039
Keeping in-kernel variable in units passed from userspace will fix issue
of course, but this probably won't be right for every sysctl.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
CONFIG_DEBUG_PAGEALLOC is now supported by x86, powerpc, sparc64, and
s390. This patch implements it for the rest of the architectures by
filling the pages with poison byte patterns after free_pages() and
verifying the poison patterns before alloc_pages().
This generic one cannot detect invalid page accesses immediately but
invalid read access may cause invalid dereference by poisoned memory and
invalid write access can be detected after a long delay.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I notice there are many places doing copy_from_user() which follows
kmalloc():
dst = kmalloc(len, GFP_KERNEL);
if (!dst)
return -ENOMEM;
if (copy_from_user(dst, src, len)) {
kfree(dst);
return -EFAULT
}
memdup_user() is a wrapper of the above code. With this new function, we
don't have to write 'len' twice, which can lead to typos/mistakes. It
also produces smaller code and kernel text.
A quick grep shows 250+ places where memdup_user() *may* be used. I'll
prepare a patchset to do this conversion.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Americo Wang <xiyou.wangcong@gmail.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
chg is unsigned, so it cannot be less than 0.
Also, since region_chg returns long, let vma_needs_reservation() forward
this to alloc_huge_page(). Store it as long as well. all callers cast it
to long anyway.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Johannes Weiner <hannes@saeurebad.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The pagevec_swap_free() at the end of shrink_active_list() was introduced
in 68a22394 "vmscan: free swap space on swap-in/activation" when
shrink_active_list() was still rotating referenced active pages.
In 7e9cd48 "vmscan: fix pagecache reclaim referenced bit check" this was
changed, the rotating removed but the pagevec_swap_free() after the
rotation loop was forgotten, applying now to the pagevec of the
deactivation loop instead.
Now swap space is freed for deactivated pages. And only for those that
happen to be on the pagevec after the deactivation loop.
Complete 7e9cd48 and remove the rest of the swap freeing.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In shrink_active_list() after the deactivation loop, we strip buffer heads
from the potentially remaining pages in the pagevec.
Currently, this drops the zone's lru lock for stripping, only to reacquire
it again afterwards to update statistics.
It is not necessary to strip the pages before updating the stats, so move
the whole thing out of the protected region and save the extra locking.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: MinChan Kim <minchan.kim@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a helper function account_page_dirtied(). Use that from two
callsites. reiser4 adds a function which adds a third callsite.
Signed-off-by: Edward Shishkin<edward.shishkin@gmail.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
During page allocation, there are two stages of direct reclaim that are
applied to each zone in the preferred list. The first stage using
zone_reclaim() reclaims unmapped file backed pages and slab pages if over
defined limits as these are cheaper to reclaim. The caller specifies the
order of the target allocation but the scan control is not being correctly
initialised.
The impact is that the correct number of pages are being reclaimed but
that lumpy reclaim is not being applied. This increases the chances of a
full direct reclaim via try_to_free_pages() is required.
This patch initialises the order field of the scan control as requested by
the caller.
[mel@csn.ul.ie: rewrote changelog]
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
At first look, mark_page_accessed() in follow_page() seems a bit strange.
It seems pte_mkyoung() would be better consistent with other kernel code.
However, it is intentional. The commit log said:
------------------------------------------------
commit 9e45f61d69be9024a2e6bef3831fb04d90fac7a8
Author: akpm <akpm>
Date: Fri Aug 15 07:24:59 2003 +0000
[PATCH] Use mark_page_accessed() in follow_page()
Touching a page via follow_page() counts as a reference so we should be
either setting the referenced bit in the pte or running mark_page_accessed().
Altering the pte is tricky because we haven't implemented an atomic
pte_mkyoung(). And mark_page_accessed() is better anyway because it has more
aging state: it can move the page onto the active list.
BKrev: 3f3c8acbplT8FbwBVGtth7QmnqWkIw
------------------------------------------------
The atomic issue is still true nowadays. adding comment help to understand
code intention and it would be better.
[akpm@linux-foundation.org: clarify text]
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
shrink_inactive_list() scans in sc->swap_cluster_max chunks until it hits
the scan limit it was passed.
shrink_inactive_list()
{
do {
isolate_pages(swap_cluster_max)
shrink_page_list()
} while (nr_scanned < max_scan);
}
This assumes that swap_cluster_max is not bigger than the scan limit
because the latter is checked only after at least one iteration.
In shrink_all_memory() sc->swap_cluster_max is initialized to the overall
reclaim goal in the beginning but not decreased while reclaim is making
progress which leads to subsequent calls to shrink_inactive_list()
reclaiming way too much in the one iteration that is done unconditionally.
Set sc->swap_cluster_max always to the proper goal before doing
shrink_all_zones()
shrink_list()
shrink_inactive_list().
While the current shrink_all_memory() happily reclaims more than actually
requested, this patch fixes it to never exceed the goal:
unpatched
wanted=10000 reclaimed=13356
wanted=10000 reclaimed=19711
wanted=10000 reclaimed=10289
wanted=10000 reclaimed=17306
wanted=10000 reclaimed=10700
wanted=10000 reclaimed=10004
wanted=10000 reclaimed=13301
wanted=10000 reclaimed=10976
wanted=10000 reclaimed=10605
wanted=10000 reclaimed=10088
wanted=10000 reclaimed=15000
patched
wanted=10000 reclaimed=10000
wanted=10000 reclaimed=9599
wanted=10000 reclaimed=8476
wanted=10000 reclaimed=8326
wanted=10000 reclaimed=10000
wanted=10000 reclaimed=10000
wanted=10000 reclaimed=9919
wanted=10000 reclaimed=10000
wanted=10000 reclaimed=10000
wanted=10000 reclaimed=10000
wanted=10000 reclaimed=10000
wanted=10000 reclaimed=9624
wanted=10000 reclaimed=10000
wanted=10000 reclaimed=10000
wanted=8500 reclaimed=8092
wanted=316 reclaimed=316
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: MinChan Kim <minchan.kim@gmail.com>
Acked-by: Nigel Cunningham <ncunningham@crca.org.au>
Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit a79311c14e "vmscan: bail out of
direct reclaim after swap_cluster_max pages" moved the nr_reclaimed
counter into the scan control to accumulate the number of all reclaimed
pages in a reclaim invocation.
shrink_all_memory() can use the same mechanism. it increase code
consistency and redability.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: MinChan Kim <minchan.kim@gmail.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
commit bf3f3bc5e7 (mm: don't
mark_page_accessed in fault path) only remove the mark_page_accessed() in
filemap_fault().
Therefore, swap-backed pages and file-backed pages have inconsistent
behavior. mark_page_accessed() should be removed from do_swap_page().
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Impact: cleanup
In almost cases, for_each_zone() is used with populated_zone(). It's
because almost function doesn't need memoryless node information.
Therefore, for_each_populated_zone() can help to make code simplify.
This patch has no functional change.
[akpm@linux-foundation.org: small cleanup]
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
sc.may_swap does not only influence reclaiming of anon pages but pages
mapped into pagetables in general, which also includes mapped file pages.
In shrink_page_list():
if (!sc->may_swap && page_mapped(page))
goto keep_locked;
For anon pages, this makes sense as they are always mapped and reclaiming
them always requires swapping.
But mapped file pages are skipped here as well and it has nothing to do
with swapping.
The real effect of the knob is whether mapped pages are unmapped and
reclaimed or not. Rename it to `may_unmap' to have its name match its
actual meaning more precisely.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: MinChan Kim <minchan.kim@gmail.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is no need to call for int_sqrt if argument is 0.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Christoph Lameter <cl@linux-foundation.org>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
vmap's dirty_list is unused. It's for optimizing flushing. but Nick
didn't write the code yet. so, we don't need it until time as it is
needed.
This patch removes vmap_block's dirty_list and codes related to it.
Signed-off-by: MinChan Kim <minchan.kim@gmail.com>
Acked-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In case if start_pfn overlap the upper bound no need to test end_pfn again
since we have it already trimmed.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Impact: build fix
fix typo in mm/slob.c:
mm/slob.c:469: error: ‘flags’ undeclared (first use in this function)
mm/slob.c:469: error: (Each undeclared identifier is reported only once
mm/slob.c:469: error: for each function it appears in.)
Cc: Nick Piggin <npiggin@suse.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090128135457.350751756@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'x86-stage-3-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (190 commits)
Revert "cpuacct: reduce one NULL check in fast-path"
Revert "x86: don't compile vsmp_64 for 32bit"
x86: Correct behaviour of irq affinity
x86: early_ioremap_init(), use __fix_to_virt(), because we are sure it's safe
x86: use default_cpu_mask_to_apicid for 64bit
x86: fix set_extra_move_desc calling
x86, PAT, PCI: Change vma prot in pci_mmap to reflect inherited prot
x86/dmi: fix dmi_alloc() section mismatches
x86: e820 fix various signedness issues in setup.c and e820.c
x86: apic/io_apic.c define msi_ir_chip and ir_ioapic_chip all the time
x86: irq.c keep CONFIG_X86_LOCAL_APIC interrupts together
x86: irq.c use same path for show_interrupts
x86: cpu/cpu.h cleanup
x86: Fix a couple of sparse warnings in arch/x86/kernel/apic/io_apic.c
Revert "x86: create a non-zero sized bm_pte only when needed"
x86: pci-nommu.c cleanup
x86: io_delay.c cleanup
x86: rtc.c cleanup
x86: i8253 cleanup
x86: kdebugfs.c cleanup
...
It doesn't change the semantics, but it looks like
the logical 'or' was meant to be used here.
Signed-off-by: Alexey Zaytsev <alexey.zaytsev@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Linus Torvalds
David Howells
Daisuke Nishimura
KAMEZAWA Hiroyuki
KOSAKI Motohiro
Balbir Singh
KAMEZAWA Hiroyuki
Jean Delvare
Martin Schwidefsky
Anton Blanchard
Akinobu Mita
Hugh Dickins
David Rientjes
Nick Piggin
Alexey Dobriyan
Li Zefan
Roel Kluin
Johannes Weiner
Edward Shishkin
MinChan Kim
Cyrill Gorcunov
Ingo Molnar
Alexey Zaytsev