Граф коммитов

12 Коммитов

Автор SHA1 Сообщение Дата
Al Viro a5ef103daa exofs: switch to {simple,page}_symlink_inode_operations
ACK-by: Boaz Harrosh <ooo@electrozaur.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-05-10 22:18:27 -04:00
Boaz Harrosh aa281ac631 Boaz Harrosh - Fix broken email address
I no longer have access to the Panasas email.
So change to an email that can always reach me.

Signed-off-by: Boaz Harrosh <ooo@electrozaur.com>
2014-10-19 20:22:32 +03:00
Sachin Bhamare 8b56a30caa exofs: Add SYSFS info for autologin/pNFS export
Introduce sysfs infrastructure for exofs cluster filesystem.

Each OSD target shows up as below in the sysfs hierarchy:
	/sys/fs/exofs/<osdname>_<partition_id>/devX

Where <osdname>_<partition_id> is the unique identification
of a Superblock.

Where devX: 0 <= X < device_table_size. They are ordered
in device-table order as specified to the mkfs.exofs command

Each OSD device  devX has following attributes :
	osdname - ReadOnly
	systemid - ReadOnly
	uri - Read/Write

It is up to user-mode to update devX/uri for support of
autologin.

These sysfs information are used both for autologin as well
as support for exporting exofs via a pNFSD server in user-mode.
(.eg NFS-Ganesha)

Signed-off-by: Sachin Bhamare <sbhamare@panasas.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2012-05-21 12:24:01 +03:00
Boaz Harrosh a1fec1dbbc ore: RAID5 read
This patch introduces the first stage of RAID5 support
mainly the skip-over-raid-units when reading. For
writes it inserts BLANK units, into where XOR blocks
should be calculated and written to.

It introduces the new "general raid maths", and the main
additional parameters and components needed for raid5.

Since at this stage it could corrupt future version that
actually do support raid5. The enablement of raid5
mounting and setting of parity-count > 0 is disabled. So
the raid5 code will never be used. Mounting of raid5 is
only enabled later once the basic XOR write is also in.
But if the patch "enable RAID5" is applied this code has
been tested to be able to properly read raid5 volumes
and is according to standard.

Also it has been tested that the new maths still properly
supports RAID0 and grouping code just as before.
(BTW: I have found more bugs in the pnfs-obj RAID math
 fixed here)

The ore.c file is getting too big, so new ore_raid.[hc]
files are added that will include the special raid stuff
that are not used in striping and mirrors. In future write
support these will get bigger.
When adding the ore_raid.c to Kbuild file I was forced to
rename ore.ko to libore.ko. Is it possible to keep source
file, say ore.c and module file ore.ko the same even if there
are multiple files inside ore.ko?

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-10-24 16:55:36 -07:00
Boaz Harrosh cf283ade08 ore: Make ore its own module
Export everything from ore need exporting. Change Kbuild and Kconfig
to build ore.ko as an independent module. Import ore from exofs

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-08-06 19:36:19 -07:00
Boaz Harrosh 8ff660ab85 exofs: Rename raid engine from exofs/ios.c => ore
ORE stands for "Objects Raid Engine"

This patch is a mechanical rename of everything that was in ios.c
and its API declaration to an ore.c and an osd_ore.h header. The ore
engine will later be used by the pnfs objects layout driver.

* File ios.c => ore.c

* Declaration of types and API are moved from exofs.h to a new
  osd_ore.h

* All used types are prefixed by ore_ from their exofs_ name.

* Shift includes from exofs.h to osd_ore.h so osd_ore.h is
  independent, include it from exofs.h.

Other than a pure rename there are no other changes. Next patch
will move the ore into it's own module and will export the API
to be used by exofs and later the layout driver

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-08-06 19:36:18 -07:00
Boaz Harrosh 8ce9bdd1fb exofs: move osd.c to ios.c
If I do a "git mv" together with a massive code change
and commit in one patch, git looses the rename and
records a delete/new instead. This is bad because I want
a rename recorded so later rebased/cherry-picked patches
to the old name will work. Also the --follow is lost.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-12-10 09:59:21 +02:00
Boaz Harrosh ba9e5e98ca exofs: super_operations and file_system_type
This patch ties all operation vectors into a file system superblock
and registers the exofs file_system_type at module's load time.

* The file system control block (AKA on-disk superblock) resides in
  an object with a special ID (defined in common.h).
  Information included in the file system control block is used to
  fill the in-memory superblock structure at mount time. This object
  is created before the file system is used by mkexofs.c It contains
  information such as:
	- The file system's magic number
	- The next inode number to be allocated

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-03-31 19:44:34 +03:00
Boaz Harrosh e6af00f1d1 exofs: dir_inode and directory operations
implementation of directory and inode operations.

* A directory is treated as a file, and essentially contains a list
  of <file name, inode #> pairs for files that are found in that
  directory. The object IDs correspond to the files' inode numbers
  and are allocated using a 64bit incrementing global counter.
* Each file's control block (AKA on-disk inode) is stored in its
  object's attributes. This applies to both regular files and other
  types (directories, device files, symlinks, etc.).

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-03-31 19:44:31 +03:00
Boaz Harrosh 982980d753 exofs: symlink_inode and fast_symlink_inode operations
Generic implementation of symlink ops.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-03-31 19:44:27 +03:00
Boaz Harrosh e806271916 exofs: file and file_inode operations
implementation of the file_operations and inode_operations for
regular data files.

Most file_operations are generic vfs implementations except:
- exofs_truncate will truncate the OSD object as well
- Generic file_fsync is not good for none_bd devices so open code it
- The default for .flush in Linux is todo nothing so call exofs_fsync
  on the file.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-03-31 19:44:24 +03:00
Boaz Harrosh b14f8ab284 exofs: Kbuild, Headers and osd utils
This patch includes osd infrastructure that will be used later by
the file system.

Also the declarations of constants, on disk structures,
and prototypes.

And the Kbuild+Kconfig files needed to build the exofs module.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-03-31 19:44:20 +03:00