Граф коммитов

19 Коммитов

Автор SHA1 Сообщение Дата
Steven Whitehouse 4513899092 GFS2: Use ->writepages for ordered writes
Instead of using a list of buffers to write ahead of the journal
flush, this now uses a list of inodes and calls ->writepages
via filemap_fdatawrite() in order to achieve the same thing. For
most use cases this results in a shorter ordered write list,
as well as much larger i/os being issued.

The ordered write list is sorted by inode number before writing
in order to retain the disk block ordering between inodes as
per the previous code.

The previous ordered write code used to conflict in its assumptions
about how to write out the disk blocks with mpage_writepages()
so that with this updated version we can also use mpage_writepages()
for GFS2's ordered write, writepages implementation. So we will
also send larger i/os from writeback too.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-01-29 10:29:17 +00:00
Steven Whitehouse e8c92ed769 GFS2: Clean up log write code path
Prior to this patch, we have two ways of sending i/o to the log.
One of those is used when we need to allocate both the data
to be written itself and also a buffer head to submit it. This
is done via sb_getblk and friends. This is used mostly for writing
log headers.

The other method is used when writing blocks which have some
in-place counterpart. This is the case for all the metadata
blocks which are journalled, and when journaled data is in use,
for unescaped journalled data blocks.

This patch replaces both of those two methods, and about half
a dozen separate i/o submission points with a single i/o
submission function. We also go direct to bio rather than
using buffer heads, since this allows us to build i/o
requests of the maximum size for the block device in
question. It also reduces the memory required for flushing
the log, which can be very useful in low memory situations.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-04-24 16:44:34 +01:00
Steven Whitehouse 47ac5537a7 GFS2: Move two functions from log.c to lops.c
gfs2_log_get_buf() and gfs2_log_fake_buf() are both used
only in lops.c, so move them next to their callers and they
can then become static.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-02-28 17:09:59 +00:00
Steven Whitehouse 4667a0ec32 GFS2: Make writeback more responsive to system conditions
This patch adds writeback_control to writing back the AIL
list. This means that we can then take advantage of the
information we get in ->write_inode() in order to set off
some pre-emptive writeback.

In addition, the AIL code is cleaned up a bit to make it
a bit simpler to understand.

There is still more which can usefully be done in this area,
but this is a good start at least.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-20 09:01:37 +01:00
Bob Peterson ed4878e8a4 GFS2: Rework reclaiming unlinked dinodes
The previous patch I wrote for reclaiming unlinked dinodes
had some shortcomings and did not prevent all hangs.
This version is much cleaner and more logical, and has
passed very difficult testing.  Sorry for the churn.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-05-21 16:11:36 +01:00
Benjamin Marzinski 5e687eac1b GFS2: Various gfs2_logd improvements
This patch contains various tweaks to how log flushes and active item writeback
work. gfs2_logd is now managed by a waitqueue, and gfs2_log_reseve now waits
for gfs2_logd to do the log flushing.  Multiple functions were rewritten to
remove the need to call gfs2_log_lock(). Instead of using one test to see if
gfs2_logd had work to do, there are now seperate tests to check if there
are two many buffers in the incore log or if there are two many items on the
active items list.

This patch is a port of a patch Steve Whitehouse wrote about a year ago, with
some minor changes.  Since gfs2_ail1_start always submits all the active items,
it no longer needs to keep track of the first ai submitted, so this has been
removed. In gfs2_log_reserve(), the order of the calls to
prepare_to_wait_exclusive() and wake_up() when firing off the logd thread has
been switched.  If it called wake_up first there was a small window for a race,
where logd could run and return before gfs2_log_reserve was ready to get woken
up. If gfs2_logd ran, but did not free up enough blocks, gfs2_log_reserve()
would be left waiting for gfs2_logd to eventualy run because it timed out.
Finally, gt_logd_secs, which controls how long to wait before gfs2_logd times
out, and flushes the log, can now be set on mount with ar_commit.

Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-05-05 09:39:18 +01:00
Harvey Harrison 2d81afb879 [GFS2] trivial sparse lock annotations
Annotate the &sdp->sd_log_lock.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-06-27 09:39:31 +01:00
Steven Whitehouse ec69b18883 [GFS2] Move gfs2_logd into log.c
This means that we can mark gfs2_ail1_empty static and prepares
the way for further changes.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25 08:07:56 +00:00
Steven Whitehouse 2bcd610d2f [GFS2] Don't add glocks to the journal
The only reason for adding glocks to the journal was to keep track
of which locks required a log flush prior to release. We add a
flag to the glock to allow this check to be made in a simpler way.

This reduces the size of a glock (by 12 bytes on i386, 24 on x86_64)
and means that we can avoid extra work during the journal flush.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25 08:07:52 +00:00
Steven Whitehouse f91a0d3e24 [GFS2] Remove useless i_cache from inodes
The i_cache was designed to keep references to the indirect blocks
used during block mapping so that they didn't have to be looked
up continually. The idea failed because there are too many places
where the i_cache needs to be freed, and this has in the past been
the cause of many bugs.

In addition there was no performance benefit being gained since the
disk blocks in question were cached anyway. So this patch removes
it in order to simplify the code to prepare for other changes which
would otherwise have had to add further support for this feature.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25 08:07:16 +00:00
Steven Whitehouse 16615be18c [GFS2] Clean up journaled data writing
This patch cleans up the code for writing journaled data into the log.
It also removes the need to allocate a small "tag" structure for each
block written into the log. Instead we just keep count of the outstanding
I/O so that we can be sure that its all been written at the correct time.
Another result of this patch is that a number of ll_rw_block() calls
have become submit_bh() calls, closing some races at the same time.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-10-10 08:56:24 +01:00
Steven Whitehouse 1e1a3d03e9 [GFS2] Introduce gfs2_remove_from_ail
This collects together the operations required to remove a gfs2_bufdata
from the ail lists. Its only called from two places to start with, but
expect to see more of this function in future.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-10-10 08:55:55 +01:00
Steven Whitehouse a25311c8e0 [GFS2] Move gfs2_meta_syncfs() into log.c
By moving gfs2_meta_syncfs() into log.c, gfs2_ail1_start()
can be made static.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30 10:36:45 -05:00
Steven Whitehouse f2f7ba5237 [GFS2] Make headers compile on their own
As per Jan Engelhardt's comments, this should make all the headers
compile on their own by including and/or declaring structures
early.

Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-05 10:39:21 -04:00
Steven Whitehouse e9fc2aa091 [GFS2] Update copyright, tidy up incore.h
As per comments from Jan Engelhardt <jengelh@linux01.gwdg.de> this
updates the copyright message to say "version" in full rather than
"v.2". Also incore.h has been updated to remove forward structure
declarations which are not required.

The gfs2_quota_lvb structure has now had endianess annotations added
to it. Also quota.c has been updated so that we now store the
lvb data locally in endian independant format to avoid needing
a structure in host endianess too. As a result the endianess
conversions are done as required at various points and thus the
conversion routines in lvb.[ch] are no longer required. I've
moved the one remaining constant in lvb.h thats used into lm.h
and removed the unused lvb.[ch].

I have not changed the HIF_ constants. That is left to a later patch
which I hope will unify the gh_flags and gh_iflags fields of the
struct gfs2_holder.

Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-01 11:05:15 -04:00
Steven Whitehouse 3a8a9a1034 [GFS2] Update copyright date to 2006
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-05-18 15:09:15 -04:00
Steven Whitehouse b09e593d79 [GFS2] Fix a ref count bug and other clean ups
This fixes a ref count bug that sometimes showed up a umount time
(causing it to hang) but it otherwise mostly harmless. At the same
time there are some clean ups including making the log operations
structures const, moving a memory allocation so that its not done
in the fast path of checking to see if there is an outstanding
transaction related to a particular glock.

Removes the sd_log_wrap varaible which was updated, but never actually
used anywhere. Updates the gfs2 ioctl() to run without the kernel lock
(which it never needed anyway). Removes the "invalidate inodes" loop
from GFS2's put_super routine. This is done in kill super anyway so
we don't need to do it here. The loop was also bogus in that if there
are any inodes "stuck" at this point its a bug and we need to know
about it rather than hide it by hanging forever.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-04-07 11:17:32 -04:00
Steven Whitehouse f55ab26a8f [GFS2] Use mutices rather than semaphores
As well as a number of minor bug fixes, this patch changes GFS
to use mutices rather than semaphores. This results in better
information in case there are any locking problems.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-21 12:51:39 +00:00
David Teigland b3b94faa5f [GFS2] The core of GFS2
This patch contains all the core files for GFS2.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00