Граф коммитов

3856 Коммитов

Автор SHA1 Сообщение Дата
John Oldman 89e7c85026 ata: sata_inic162x fix a spelling issue
Fixed a warning message spelling issue.

Signed-off-by: John Oldman <john.oldman@polehill.co.uk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-23 09:59:30 -06:00
Kai-Heng Feng 1f2ef049cb ahci: Add Intel Comet Lake PCH-U PCI ID
Add Intel Comet Lake PCH-U PCI ID to the list of supported controllers.

Set default SATA LPM so the SoC can enter S0ix.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-16 10:26:52 -06:00
Jian-Hong Pan 7667e63c8a ahci: Add Intel Comet Lake PCH RAID PCI ID
Intel Comet Lake should use the default LPM policy for mobile chipsets.
So, add the PCI ID to the driver list of supported devices.

Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-09 09:31:38 -06:00
Kai-Heng Feng 894fba7f43 ata: ahci: Add sysfs attribute to show remapped NVMe device count
Add a new sysfs attribute to show how many NVMe devices are remapped.

Userspace like distro installer can use this info to ask user to change
the BIOS setting.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-07 16:07:38 -06:00
Colin Ian King 3aadcf8382 ata: ahci-imx: remove redundant assignment to ret
The variable ret is being initialized with a value that is never read
and it is being updated later with a new value.  The initialization is
redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-07 14:49:45 -06:00
Kai-Heng Feng 8305f72f95 libata: Return correct status in sata_pmp_eh_recover_pm() when ATA_DFLAG_DETACH is set
During system resume from suspend, this can be observed on ASM1062 PMP
controller:

ata10.01: SATA link down (SStatus 0 SControl 330)
ata10.02: hard resetting link
ata10.02: SATA link down (SStatus 0 SControl 330)
ata10.00: configured for UDMA/133
Kernel panic - not syncing: stack-protector: Kernel
 in: sata_pmp_eh_recover+0xa2b/0xa40

CPU: 2 PID: 230 Comm: scsi_eh_9 Tainted: P OE
#49-Ubuntu
Hardware name: System manufacturer System Product
 1001 12/10/2017
Call Trace:
dump_stack+0x63/0x8b
panic+0xe4/0x244
? sata_pmp_eh_recover+0xa2b/0xa40
__stack_chk_fail+0x19/0x20
sata_pmp_eh_recover+0xa2b/0xa40
? ahci_do_softreset+0x260/0x260 [libahci]
? ahci_do_hardreset+0x140/0x140 [libahci]
? ata_phys_link_offline+0x60/0x60
? ahci_stop_engine+0xc0/0xc0 [libahci]
sata_pmp_error_handler+0x22/0x30
ahci_error_handler+0x45/0x80 [libahci]
ata_scsi_port_error_handler+0x29b/0x770
? ata_scsi_cmd_error_handler+0x101/0x140
ata_scsi_error+0x95/0xd0
? scsi_try_target_reset+0x90/0x90
scsi_error_handler+0xd0/0x5b0
kthread+0x121/0x140
? scsi_eh_get_sense+0x200/0x200
? kthread_create_worker_on_cpu+0x70/0x70
ret_from_fork+0x22/0x40
Kernel Offset: 0xcc00000 from 0xffffffff81000000
(relocation range: 0xffffffff80000000-0xffffffffbfffffff)

Since sata_pmp_eh_recover_pmp() doens't set rc when ATA_DFLAG_DETACH is
set, sata_pmp_eh_recover() continues to run. During retry it triggers
the stack protector.

Set correct rc in sata_pmp_eh_recover_pmp() to let sata_pmp_eh_recover()
jump to pmp_fail directly.

BugLink: https://bugs.launchpad.net/bugs/1821434
Cc: stable@vger.kernel.org
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-07 14:45:15 -06:00
Bartlomiej Zolnierkiewicz bf89b0bf30 ata: make "libata.force" kernel parameter optional
Add ATA_FORCE config option (visible only if EXPERT config
option is enabled) and make "libata.force" kernel parameter
optional.

Code size savings on m68k arch using (modified) atari_defconfig:

   text    data     bss     dec     hex filename
w/ CONFIG_ATA_FORCE=y:
  31983     572      40   32595    7f53 drivers/ata/libata-core.o
w/ CONFIG_ATA_FROCE=n:
  28958     316      32   29306    727a drivers/ata/libata-core.o

Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26 10:28:20 -06:00
Bartlomiej Zolnierkiewicz a0ccd2511b ata: move ata_eh_analyze_ncq_error() & co. to libata-sata.c
* move ata_eh_analyze_ncq_error() and ata_eh_read_log_10h() to
  libata-sata.c

* add static inline for ata_eh_analyze_ncq_error() for
  CONFIG_SATA_HOST=n case (link->sactive is non-zero only if
  NCQ commands are actually queued so empty function body is
  sufficient)

Code size savings on m68k arch using (modified) atari_defconfig:

   text    data     bss     dec     hex filename
before:
  16164      18       0   16182    3f36 drivers/ata/libata-eh.o
after:
  15446      18       0   15464    3c68 drivers/ata/libata-eh.o

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26 10:28:20 -06:00
Bartlomiej Zolnierkiewicz a695de27fc ata: start separating SATA specific code from libata-eh.c
Start separating SATA specific code from libata-eh.c:

* move sata_async_notification() to libata-sata.c:

Code size savings on m68k arch using (modified) atari_defconfig:

   text    data     bss     dec     hex filename
before:
  16243      18       0   16261    3f85 drivers/ata/libata-eh.o
after:
  16164      18       0   16182    3f36 drivers/ata/libata-eh.o

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26 10:28:20 -06:00
Bartlomiej Zolnierkiewicz 15964ff728 ata: move ata_sas_*() to libata-sata.c
* un-inline:
  - ata_scsi_dump_cdb()
  - __ata_scsi_queuecmd()

* un-static:
  - ata_scsi_sdev_config()
  - ata_scsi_dev_config()
  - ata_scsi_dump_cdb()
  - __ata_scsi_queuecmd()

* move ata_sas_*() to libata-sata.c:

* add static inlines for CONFIG_SATA_HOST=n case for
  ata_sas_{allocate,free}_tag()

Code size savings on m68k arch using (modified) atari_defconfig:

   text    data     bss     dec     hex filename
before:
  19137      23     576   19736    4d18 drivers/ata/libata-scsi.o
after:
  18330      23     576   18929    49f1 drivers/ata/libata-scsi.o

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26 10:28:20 -06:00
Bartlomiej Zolnierkiewicz ec811a94c5 ata: start separating SATA specific code from libata-scsi.c
Start separating SATA specific code from libata-scsi.c:

* un-static ata_scsi_find_dev()

* move following code to libata-sata.c:
  - SATA only sysfs device attributes handling
  - __ata_change_queue_depth()
  - ata_scsi_change_queue_depth()

* cover with CONFIG_SATA_HOST ifdef SATA only sysfs device
  attributes handling code and ATA_SHT_NCQ() macro in
  <linux/libata.h>

Code size savings on m68k arch using (modified) atari_defconfig:

   text    data     bss     dec     hex filename
before:
  20702     105     576   21383    5387 drivers/ata/libata-scsi.o
after:
  19137      23     576   19736    4d18 drivers/ata/libata-scsi.o

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26 10:28:20 -06:00
Bartlomiej Zolnierkiewicz 2b384ede71 ata: move sata_deb_timing_*() to libata-sata.c
* move sata_deb_timing_*() to libata-sata.c

* add static inline for sata_ehc_deb_timing() for
  CONFIG_SATA_HOST=n case

Code size savings on m68k arch using (modified) atari_defconfig:

   text    data     bss     dec     hex filename
before:
  32158     572      40   32770    8002 drivers/ata/libata-core.o
after:
  32015     572      40   32627    7f73 drivers/ata/libata-core.o

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26 10:28:20 -06:00
Bartlomiej Zolnierkiewicz 61a11986d3 ata: move ata_qc_complete_multiple() to libata-sata.c
* move ata_qc_complete_multiple() to libata-sata.c

Code size savings on m68k arch using (modified) atari_defconfig:

   text    data     bss     dec     hex filename
before:
  32559     572      40   33171    8193 drivers/ata/libata-core.o
after:
  32162     572      40   32774    8006 drivers/ata/libata-core.o

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26 10:28:20 -06:00
Bartlomiej Zolnierkiewicz 78c97c80d7 ata: move sata_link_hardreset() to libata-sata.c
* move sata_link_hardreset() to libata-sata.c

* add static inline for CONFIG_SATA_HOST=n case

* make sata_set_spd_needed() static

Code size savings on m68k arch using (modified) atari_defconfig:

   text    data     bss     dec     hex filename
before:
  32724     572      40   33336    8238 drivers/ata/libata-core.o
after:
  32559     572      40   33171    8193 drivers/ata/libata-core.o

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26 10:28:20 -06:00
Bartlomiej Zolnierkiewicz 9d3158f5cb ata: move sata_link_{debounce,resume}() to libata-sata.c
* move sata_link_{debounce,resume}() to libata-sata.c

* add static inline for CONFIG_SATA_HOST=n case (only one,
  for sata_link_resume() is needed)

Code size savings on m68k arch using (modified) atari_defconfig:

   text    data     bss     dec     hex filename
before:
  32816     572      40   33428    8294 drivers/ata/libata-core.o
after:
  32724     572      40   33336    8238 drivers/ata/libata-core.o

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26 10:28:19 -06:00
Bartlomiej Zolnierkiewicz ab4117cf24 ata: move *sata_set_spd*() to libata-sata.c
* move *sata_set_spd*() to libata-sata.c

* add static inlines for CONFIG_SATA_HOST=n case

Code size savings on m68k arch using (modified) atari_defconfig:

   text    data     bss     dec     hex filename
before:
  32842     572      40   33458    82ae drivers/ata/libata-core.o
after:
  32812     572      40   33428    8290 drivers/ata/libata-core.o

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26 10:28:19 -06:00
Bartlomiej Zolnierkiewicz 6eab1bc0ee ata: move sata_scr_*() to libata-sata.c
* move sata_scr_*() to libata-sata.c

* add static inlines for CONFIG_SATA_HOST=n case

Code size savings on m68k arch using (modified) atari_defconfig:

   text    data     bss     dec     hex filename
before:
  35642     572      40   36254    8d9e drivers/ata/libata-core.o
  16607      18       0   16625    40f1 drivers/ata/libata-eh.o
after:
  32846     572      40   33458    82b2 drivers/ata/libata-core.o
  16243      18       0   16261    3f85 drivers/ata/libata-eh.o

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26 10:28:19 -06:00
Bartlomiej Zolnierkiewicz 7fe183c773 ata: start separating SATA specific code from libata-core.c
Start separating SATA specific code from libata-core.c:

* move following functions to libata-sata.c:
  - ata_tf_to_fis()
  - ata_tf_from_fis()
  - sata_link_scr_lpm()
  - ata_slave_link_init()
  - sata_lpm_ignore_phy_events()

* group above functions together in <linux/libata.h>

* include libata-sata.c in the build when CONFIG_SATA_HOST=y

Code size savings on m68k arch using (modified) atari_defconfig:

   text    data     bss     dec     hex filename
before:
  37582     572      40   38194    9532 drivers/ata/libata-core.o
after:
  36762     572      40   37374    91fe drivers/ata/libata-core.o

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26 10:28:19 -06:00
Bartlomiej Zolnierkiewicz 4c9029e7d0 ata: let compiler optimize out ata_eh_set_lpm() on non-SATA hosts
Add !IS_ENABLED(CONFIG_SATA_HOST) to ata_eh_set_lpm() to allow
compiler to optimize out the function for non-SATA configs (for
PATA hosts "ap && !ap->ops->set_lpm" condition is always true so
it's sufficient for the function to return zero).

Code size savings on m68k arch using (modified) atari_defconfig:

   text    data     bss     dec     hex filename
before:
  17353      18       0   17371    43db drivers/ata/libata-eh.o
after:
  16607      18       0   16625    40f1 drivers/ata/libata-eh.o

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26 10:28:19 -06:00
Bartlomiej Zolnierkiewicz cba97ea18d ata: let compiler optimize out ata_dev_config_ncq() on non-SATA hosts
Add !IS_ENABLED(CONFIG_SATA_HOST) to ata_dev_config_ncq() to allow
compiler to optimize out the function for non-SATA configs.

Code size savings on m68k arch using (modified) atari_defconfig:

   text    data     bss     dec     hex filename
before:
  37582     572      40   38194    9532 drivers/ata/libata-core.o
after:
  36462     572      40   37074    90d2 drivers/ata/libata-core.o

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26 10:28:19 -06:00
Bartlomiej Zolnierkiewicz a9b2c120e3 ata: separate PATA timings code from libata-core.c
Separate PATA timings code from libata-core.c:

* add PATA_TIMINGS config option and make corresponding PATA
  host drivers (and ATA ACPI code) select it

* move following PATA timings code to libata-pata-timings.c:
  - ata_timing_quantize()
  - ata_timing_merge()
  - ata_timing_find_mode()
  - ata_timing_compute()

* group above functions together in <linux/libata.h>

* include libata-pata-timings.c in the build when PATA_TIMINGS
  config option is enabled

* cover ata_timing_cycle2mode() with CONFIG_ATA_ACPI ifdef (it
  depends on code from libata-core.c and libata-pata-timings.c
  while its only user is ATA ACPI)

Code size savings on m68k arch using (modified) atari_defconfig:

   text    data     bss     dec     hex filename
before:
  39688     573      40   40301    9d6d drivers/ata/libata-core.o
after:
  37820     572      40   38432    9620 drivers/ata/libata-core.o

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26 10:28:19 -06:00
Bartlomiej Zolnierkiewicz 4e16818704 ata: fix CodingStyle issues in PATA timings code
* fix the overly long line in ata_timing_quantize()

* use standard kernel CodingStyle in ata_timing_merge()

* do not use assignment in if condition in ata_timing_compute()

* fix non-standard comment style in ata_timing_compute()

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26 10:28:18 -06:00
Bartlomiej Zolnierkiewicz 2b67a6d3a4 ata: remove EXPORT_SYMBOL_GPL()s not used by modules
Remove EXPORT_SYMBOL_GPL()s for functions used only by
the core libata code.

Code size savings on m68k arch using (modified) atari_defconfig:

   text    data     bss     dec     hex filename
before:
  39838     573      40   40451    9e03 drivers/ata/libata-core.o
  21071     105     576   21752    54f8 drivers/ata/libata-scsi.o
  17519      18       0   17537    4481 drivers/ata/libata-eh.o
after:
  39688     573      40   40301    9d6d drivers/ata/libata-core.o
  21040     105     576   21721    54d9 drivers/ata/libata-scsi.o
  17405      18       0   17423    440f drivers/ata/libata-eh.o

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26 10:28:18 -06:00
Bartlomiej Zolnierkiewicz a52fbcfc7b ata: move EXPORT_SYMBOL_GPL()s close to exported code
Move EXPORT_SYMBOL_GPL()s close to exported code like it is
done in other kernel subsystems. As a nice side effect this
results in the removal of few ifdefs.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26 10:28:18 -06:00
Bartlomiej Zolnierkiewicz c8fa4f8e22 ata: optimize ata_scsi_rbuf[] size
Currently the maximum required size of the ata_scsi_rbuf[] is
576 bytes in ata_scsiop_inq_89() so modify ATA_SCSI_RBUF_SIZE
define accordingly.

Code size savings on m68k arch using (modified) atari_defconfig:

   text    data     bss     dec     hex filename
before:
  20782     105    4096   24983    6197 drivers/ata/libata-scsi.o
after:
  20782     105     576   21463    53d7 drivers/ata/libata-scsi.o

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26 10:28:18 -06:00
Bartlomiej Zolnierkiewicz 8ba5a45c99 ata: optimize struct ata_force_param size
Optimize struct ata_force_param size by:
- using u8 for cbl and spd_limit fields
- using u16 for lflags field

Code size savings on m68k arch using (modified) atari_defconfig:

   text    data     bss     dec     hex filename
before:
  41064     573      40   41677    a2cd drivers/ata/libata-core.o
after:
  40654     573      40   41267    a133 drivers/ata/libata-core.o

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26 10:28:18 -06:00
Bartlomiej Zolnierkiewicz bbf5a0976d ata: use COMMAND_LINE_SIZE for ata_force_param_buf[] size
Use COMMAND_LINE_SIZE instead PAGE_SIZE for ata_force_param_buf[]
size as libata parameters buffer doesn't need to be bigger than
the command line buffer.

For many architectures this results in decreased libata-core.o
size (COMMAND_LINE_SIZE varies from 256 to 4096 while the minimum
PAGE_SIZE is 4096).

Code size savings on m68k arch using (modified) atari_defconfig:

   text    data     bss     dec     hex filename
before:
  41064    4413      40   45517    b1cd drivers/ata/libata-core.o
after:
  41064     573      40   41677    a2cd drivers/ata/libata-core.o

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26 10:28:18 -06:00
Bartlomiej Zolnierkiewicz 3353100136 ata: simplify ata_scsiop_inq_89()
Initialize rbuf[] directly instead of using ata_tf_to_fis(). This
results in simpler and smaller code. It also allows separating
ata_tf_to_fis() into SATA specific libata part in the future.

Code size savings on m68k arch using (modified) atari_defconfig:

   text    data     bss     dec     hex filename
before:
  20824     105    4096   25025    61c1 drivers/ata/libata-scsi.o
after:
  20782     105    4096   24983    6197 drivers/ata/libata-scsi.o

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26 10:28:18 -06:00
Bartlomiej Zolnierkiewicz 3f0998da55 sata_promise: use ata_cable_sata()
Use core helper instead of open-coding it.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26 10:28:18 -06:00
Bartlomiej Zolnierkiewicz bd322af15c ata: make SATA_PMP option selectable only if any SATA host driver is enabled
There is no reason to expose SATA_PMP config option when no SATA
host drivers are enabled. To fix it add SATA_HOST config option,
make all SATA host drivers select it and finally make SATA_PMP
config options depend on it.

This also serves as preparation for the future changes which
optimize libata core code size on PATA only setups.

CC: "James E.J. Bottomley" <jejb@linux.ibm.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> # for SCSI bits
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26 10:28:17 -06:00
Bartlomiej Zolnierkiewicz 6f09eae3b5 ata: expose ncq_enable_prio sysfs attribute only on NCQ capable hosts
There is no point in exposing ncq_enable_prio sysfs attribute for
devices on PATA and non-NCQ capable SATA hosts so:

* remove dev_attr_ncq_prio_enable from ata_common_sdev_attrs[]

* add ata_ncq_sdev_attrs[]

* update ATA_NCQ_SHT() macro to use ata_ncq_sdev_attrs[]

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26 10:28:17 -06:00
Bartlomiej Zolnierkiewicz 3e1ee734ab ata: remove stale maintainership information from core code
In commit 7634ccd2da ("libata: maintainership update") from 2018
Jens has officially taken over libata maintainership from Tejun so
remove stale information from core libata code.

Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26 10:28:17 -06:00
Mika Westerberg 58c42b0b0d ahci: Add Intel Comet Lake PCH-V PCI ID
Add Intel Comet Lake PCH-V PCI ID to the list of supported controllers.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-25 10:29:35 -06:00
Mika Westerberg 5e125d1337 ahci: Add Intel Comet Lake PCH-H PCI ID
Add Intel Comet Lake PCH-H PCI ID to the list of supported controllers.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-25 10:29:35 -06:00
Linus Walleij 45b8084f3f libata: Assign OF node to the SCSI device
When we spawn a SCSI device from an ATA device in libata-scsi
the SCSI device had no relation to the device tree.

The DT binding allows us to define port nodes under a
PATA (IDE) or SATA host controller, so we can have proper device
nodes for these devices.

If OF is enabled, walk the children of the host controller node
to see if there is a valid device tree node to assign. The reg
is used to match to ID 0 for the master device and ID 1 for the
slave device.

The corresponding device tree bindings have been accepted by
the device tree maintainers.

Cc: Chris Healy <cphealy@gmail.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-25 10:29:35 -06:00
John Garry 1d72f7aec3 libata: Remove extra scsi_host_put() in ata_scsi_add_hosts()
If the call to scsi_add_host_with_dma() in ata_scsi_add_hosts() fails,
then we may get use-after-free KASAN warns:

==================================================================
BUG: KASAN: use-after-free in kobject_put+0x24/0x180
Read of size 1 at addr ffff0026b8c80364 by task swapper/0/1
CPU: 1 PID: 1 Comm: swapper/0 Tainted: G        W         5.6.0-rc3-00004-g5a71b206ea82-dirty #1765
Hardware name: Huawei TaiShan 200 (Model 2280)/BC82AMDD, BIOS 2280-V2 CS V3.B160.01 02/24/2020
Call trace:
dump_backtrace+0x0/0x298
show_stack+0x14/0x20
dump_stack+0x118/0x190
print_address_description.isra.9+0x6c/0x3b8
__kasan_report+0x134/0x23c
kasan_report+0xc/0x18
__asan_load1+0x5c/0x68
kobject_put+0x24/0x180
put_device+0x10/0x20
scsi_host_put+0x10/0x18
ata_devres_release+0x74/0xb0
release_nodes+0x2d0/0x470
devres_release_all+0x50/0x78
really_probe+0x2d4/0x560
driver_probe_device+0x7c/0x148
device_driver_attach+0x94/0xa0
__driver_attach+0xa8/0x110
bus_for_each_dev+0xe8/0x158
driver_attach+0x30/0x40
bus_add_driver+0x220/0x2e0
driver_register+0xbc/0x1d0
__pci_register_driver+0xbc/0xd0
ahci_pci_driver_init+0x20/0x28
do_one_initcall+0xf0/0x608
kernel_init_freeable+0x31c/0x384
kernel_init+0x10/0x118
ret_from_fork+0x10/0x18

Allocated by task 5:
save_stack+0x28/0xc8
__kasan_kmalloc.isra.8+0xbc/0xd8
kasan_kmalloc+0xc/0x18
__kmalloc+0x1a8/0x280
scsi_host_alloc+0x44/0x678
ata_scsi_add_hosts+0x74/0x268
ata_host_register+0x228/0x488
ahci_host_activate+0x1c4/0x2a8
ahci_init_one+0xd18/0x1298
local_pci_probe+0x74/0xf0
work_for_cpu_fn+0x2c/0x48
process_one_work+0x488/0xc08
worker_thread+0x330/0x5d0
kthread+0x1c8/0x1d0
ret_from_fork+0x10/0x18

Freed by task 5:
save_stack+0x28/0xc8
__kasan_slab_free+0x118/0x180
kasan_slab_free+0x10/0x18
slab_free_freelist_hook+0xa4/0x1a0
kfree+0xd4/0x3a0
scsi_host_dev_release+0x100/0x148
device_release+0x7c/0xe0
kobject_put+0xb0/0x180
put_device+0x10/0x20
scsi_host_put+0x10/0x18
ata_scsi_add_hosts+0x210/0x268
ata_host_register+0x228/0x488
ahci_host_activate+0x1c4/0x2a8
ahci_init_one+0xd18/0x1298
local_pci_probe+0x74/0xf0
work_for_cpu_fn+0x2c/0x48
process_one_work+0x488/0xc08
worker_thread+0x330/0x5d0
kthread+0x1c8/0x1d0
ret_from_fork+0x10/0x18

There is also refcount issue, as well:
WARNING: CPU: 1 PID: 1 at lib/refcount.c:28 refcount_warn_saturate+0xf8/0x170

The issue is that we make an erroneous extra call to scsi_host_put()
for that host:

So in ahci_init_one()->ata_host_alloc_pinfo()->ata_host_alloc(), we setup
a device release method - ata_devres_release() - which intends to release
the SCSI hosts:

static void ata_devres_release(struct device *gendev, void *res)
{
	...
	for (i = 0; i < host->n_ports; i++) {
		struct ata_port *ap = host->ports[i];

		if (!ap)
			continue;

		if (ap->scsi_host)
			scsi_host_put(ap->scsi_host);

	}
	...
}

However in the ata_scsi_add_hosts() error path, we also call
scsi_host_put() for the SCSI hosts.

Fix by removing the the scsi_host_put() calls in ata_scsi_add_hosts() and
leave this to ata_devres_release().

Fixes: f31871951b ("libata: separate out ata_host_alloc() and ata_host_register()")
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-25 10:29:35 -06:00
Kai-Heng Feng 32d2545462 ahci: Add Intel Comet Lake H RAID PCI ID
Add the PCI ID to the driver list to support this new device.

Cc: stable@vger.kernel.org
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-25 10:29:35 -06:00
Tiezhu Yang e49bd683e0 AHCI: Add support for Loongson 7A1000 SATA controller
Loongson 7A1000 SATA controller uses BAR0 as the base address register.

Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-12 07:44:19 -06:00
Takashi Iwai a900cc5cd8 libata: transport: Use scnprintf() for avoiding potential buffer overflow
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit.  Fix it by replacing with scnprintf().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-12 07:38:47 -06:00
Linus Torvalds 0384066381 libata-5.6-2020-02-05
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl47MM4QHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpqd6D/9k/bT6apjYexe//aymYX0Q9XxJ3UuoEWRj
 y/KNC0cuKbJNHFbcPeQkioW/bsPIz0t3kFz5GdhLHU8oDJnxIwBZ2kYt7JHz72bu
 c2o0UnUvMmTSz6XuZ+jBw6RHUWFxd/qB0gCctmoz1av2/QPS64hD79GjQmMriFdG
 i3YYE8LqYVhaSiPrqVTa3KzZHe5FYew2cniPkOvhTirCKZZWENSwz0bD2dlPuvB5
 TyfFic42tVOmrru4Etezk+M8upSU0hJ6AZDxxWojCTM1ILSsQvwoDPKBXmAPUFTO
 ToDyLujNzwfmvv7FOY0JrZhoPmLF+kYGJV5Y9XmDrqUPunwySvdIk7CtO8bopsnW
 zk8DqBYkOpqkxqgz4V81dKGHAVZxfGZc/zCk4TbgROwRNAVwpqaasAtRKhB4Q3eb
 q6hidXkSBm3nhcAiDaeQhtv2FGz+ojDxpJWt7Hb0yqCHyoA/nx7QEIT7dlAa3ww+
 KZHkn/wuwkrOPqYBt1m3XSYKfnrHkqU6t4s1Aeqs06dIu5r1MOHtRHOnEgoo6s2m
 xTMB8c4tX/I6z1aqShpa7Gf7HcPeE0ihK+af3E0tq83XTmjlIDigZK1FsEdZcGiR
 /B1YotCVJG8yfXOXnVG4xMGU/mJtP6nz08YgjWU2/h9spXCsz6SDLLRqXKaNZ1zN
 3rG2tSZPxg==
 =i3+r
 -----END PGP SIGNATURE-----

Merge tag 'libata-5.6-2020-02-05' of git://git.kernel.dk/linux-block

Pull libata updates from Jens Axboe:

 - Add a Sandisk CF card to supported pata_pcmcia list (Christian)

 - Move pata_arasan_cf away from legacy API (Peter)

 - Ensure ahci DMA/ints are shut down on shutdown (Prabhakar)

* tag 'libata-5.6-2020-02-05' of git://git.kernel.dk/linux-block:
  ata: pata_arasan_cf: Use dma_request_chan() instead dma_request_slave_channel()
  ata: ahci: Add shutdown to freeze hardware resources of ahci
  pata_pcmia: add SanDisk High (>8G) CF card to supported list
2020-02-06 06:11:50 +00:00
Peter Ujfalusi 7991901082 ata: pata_arasan_cf: Use dma_request_chan() instead dma_request_slave_channel()
dma_request_slave_channel() is a wrapper on top of dma_request_chan()
eating up the error code.

The dma_request_chan() is the standard API to request slave channel,
clients should be moved away from the legacy API to allow us to retire
them.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-01-29 21:13:25 -07:00
Prabhakar Kushwaha 10a663a1b1 ata: ahci: Add shutdown to freeze hardware resources of ahci
device_shutdown() called from reboot or power_shutdown expect
all devices to be shutdown. Same is true for even ahci pci driver.
As no ahci shutdown function is implemented, the ata subsystem
always remains alive with DMA & interrupt support. File system
related calls should not be honored after device_shutdown().

So defining ahci pci driver shutdown to freeze hardware (mask
interrupt, stop DMA engine and free DMA resources).

Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-01-29 21:02:15 -07:00
Christian Zigotzky 73e4eab0a8 pata_pcmia: add SanDisk High (>8G) CF card to supported list
Add new SanDisk High (>8G) CF cards to the pata_pcmcia driver.

Signed-off-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-01-29 20:54:51 -07:00
Linus Torvalds 33c84e89ab SCSI misc on 20200129
This series is slightly unusual because it includes Arnd's compat
 ioctl tree here:
 
 1c46a2cf2d Merge tag 'block-ioctl-cleanup-5.6' into 5.6/scsi-queue
 
 Excluding Arnd's changes, this is mostly an update of the usual
 drivers: megaraid_sas, mpt3sas, qla2xxx, ufs, lpfc, hisi_sas.  There
 are a couple of core and base updates around error propagation and
 atomicity in the attribute container base we use for the SCSI
 transport classes.  The rest is minor changes and updates.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXjHQJyYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishZZ8AQC02N+v
 iUnTl1YxGPjIWBbnHuUxN2Qbb9D3C6gAT1LkigEArlk163K3A1XEQHF/VNCdAz/f
 01XYTd3p1VHuegIBHlk=
 =Cn52
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This series is slightly unusual because it includes Arnd's compat
  ioctl tree here:

    1c46a2cf2d Merge tag 'block-ioctl-cleanup-5.6' into 5.6/scsi-queue

  Excluding Arnd's changes, this is mostly an update of the usual
  drivers: megaraid_sas, mpt3sas, qla2xxx, ufs, lpfc, hisi_sas.

  There are a couple of core and base updates around error propagation
  and atomicity in the attribute container base we use for the SCSI
  transport classes.

  The rest is minor changes and updates"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (149 commits)
  scsi: hisi_sas: Rename hisi_sas_cq.pci_irq_mask
  scsi: hisi_sas: Add prints for v3 hw interrupt converge and automatic affinity
  scsi: hisi_sas: Modify the file permissions of trigger_dump to write only
  scsi: hisi_sas: Replace magic number when handle channel interrupt
  scsi: hisi_sas: replace spin_lock_irqsave/spin_unlock_restore with spin_lock/spin_unlock
  scsi: hisi_sas: use threaded irq to process CQ interrupts
  scsi: ufs: Use UFS device indicated maximum LU number
  scsi: ufs: Add max_lu_supported in struct ufs_dev_info
  scsi: ufs: Delete is_init_prefetch from struct ufs_hba
  scsi: ufs: Inline two functions into their callers
  scsi: ufs: Move ufshcd_get_max_pwr_mode() to ufshcd_device_params_init()
  scsi: ufs: Split ufshcd_probe_hba() based on its called flow
  scsi: ufs: Delete struct ufs_dev_desc
  scsi: ufs: Fix ufshcd_probe_hba() reture value in case ufshcd_scsi_add_wlus() fails
  scsi: ufs-mediatek: enable low-power mode for hibern8 state
  scsi: ufs: export some functions for vendor usage
  scsi: ufs-mediatek: add dbg_register_dump implementation
  scsi: qla2xxx: Fix a NULL pointer dereference in an error path
  scsi: qla1280: Make checking for 64bit support consistent
  scsi: megaraid_sas: Update driver version to 07.713.01.00-rc1
  ...
2020-01-29 18:16:16 -08:00
Linus Torvalds 6a1000bd27 ioremap changes for 5.6
- remove ioremap_nocache given that is is equivalent to
    ioremap everywhere
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAl4vKHwLHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYMPGBAAuVNUZaZfWYHpiVP2oRcUQUguFiD3NTbknsyzV2oH
 J9P0GfeENSKwE9OOhZ7XIjnCZAJwQgTK/ppQY5yiQ/KAtYyyXjXEJ6jqqjiTDInr
 +3+I3t/LhkgrK7tMrb7ylTGa/d7KhaciljnOXC8+b75iddvM9I1z2pbHDbppZMS9
 wT4RXL/cFtRb85AfOyPLybcka3f5P2gGvQz38qyimhJYEzHDXZu9VO1Bd20f8+Xf
 eLBKX0o6yWMhcaPLma8tm0M0zaXHEfLHUKLSOkiOk+eHTWBZ3b/w5nsOQZYZ7uQp
 25yaClbameAn7k5dHajduLGEJv//ZjLRWcN3HJWJ5vzO111aHhswpE7JgTZJSVWI
 ggCVkytD3ESXapvswmACSeCIDMmiJMzvn6JvwuSMVB7a6e5mcqTuGo/FN+DrBF/R
 IP+/gY/T7zIIOaljhQVkiEIIwiD/akYo0V9fheHTBnqcKEDTHV4WjKbeF6aCwcO+
 b8inHyXZSKSMG//UlDuN84/KH/o1l62oKaB1uDIYrrL8JVyjAxctWt3GOt5KgSFq
 wVz1lMw4kIvWtC/Sy2H4oB+RtODLp6yJDqmvmPkeJwKDUcd/1JKf0KsZ8j3FpGei
 /rEkBEss0KBKyFAgBSRO2jIpdj2epgcBcsdB/r5mlhcn8L77AS6mHbA173kY4pQ/
 Kdg=
 =TUCJ
 -----END PGP SIGNATURE-----

Merge tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap

Pull ioremap updates from Christoph Hellwig:
 "Remove the ioremap_nocache API (plus wrappers) that are always
  identical to ioremap"

* tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap:
  remove ioremap_nocache and devm_ioremap_nocache
  MIPS: define ioremap_nocache to ioremap
2020-01-27 13:03:00 -08:00
Alex Shi 7e053d3e82 ata/acard_ahci: remove unused variable n_elem
No one care the varible acard_ahci in func acard_ahci_qc_prep.
better to remove it.

Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-ide@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-01-22 10:32:51 -07:00
Chen Zhou ffa302efe8 ata: pata_macio: fix comparing pointer to 0
Fixes coccicheck warning:

./drivers/ata/pata_macio.c:982:31-32:
	WARNING comparing pointer to 0, suggest !E

Compare pointer-typed values to NULL rather than 0.

Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-01-22 10:31:55 -07:00
Florian Fainelli 272ecd60a6 ata: ahci_brcm: BCM7216 reset is self de-asserting
The BCM7216 reset controller line is self-deasserting, unlike other
platforms, so make use of reset_control_reset() instead of
reset_control_deassert().

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-01-17 17:14:20 -07:00
Florian Fainelli 1a0600d112 ata: ahci_brcm: Perform reset after obtaining resources
Resources such as clocks, PHYs, regulators are likely to get a probe
deferral return code, which could lead to the AHCI controller being
reset a few times until it gets successfully probed. Since this is
typically the most time consuming operation, move it after the resources
have been acquired.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-01-17 17:14:18 -07:00
Arnd Bergmann 6fedae3cad ata: brcm: fix reset controller API usage
While fixing another issue in this driver I noticed it uses
IS_ERR_OR_NULL(), which is almost always a mistake.

Change the driver to use the proper devm_reset_control_get_optional()
interface instead and remove the checks except for the one that
checks for a failure in that function.

Fixes: 2b2c47d9e1 ("ata: ahci_brcm: Allow optional reset controller to be used")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-01-16 21:49:09 -07:00