This would only trigger if we bailed out before resetting r_con_filling_msg
because the server reply was corrupt (oversized).
Signed-off-by: Sage Weil <sage@newdream.net>
"xattr" is never NULL here. We took care of that in the previous
if statement block.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
Following Nick Piggin patches in btrfs, pagecache pages should be
allocated with __page_cache_alloc, so they obey pagecache memory
policies.
Also, using add_to_page_cache_lru instead of using a private
pagevec where applicable.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
If we abort a request, we return to caller, but the request may still
complete. And if we hold the dir FILE_EXCL bit, we may not release a
lease when sending a request. A simple un-tar, control-c, un-tar again
will reproduce the bug (manifested as a 'Cannot open: File exists').
Ensure we invalidate affected dentry leases (as well dir I_COMPLETE) so
we don't have valid (but incorrect) leases. Do the same, consistently, at
other sites where I_COMPLETE is similarly cleared.
Signed-off-by: Sage Weil <sage@newdream.net>
When we abort requests we need to prevent fill_trace et al from doing
anything that relies on locks held by the VFS caller. This fixes a race
between the reply handler and the abort code, ensuring that continue
holding the dir mutex until the reply handler completes.
Signed-off-by: Sage Weil <sage@newdream.net>
We would occasionally BUG out in the reply handler because r_reply was
nonzero, due to a race with ceph_mdsc_do_request temporarily setting
r_reply to an ERR_PTR value. This is unnecessary, messy, and also wrong
in the EIO case.
Clean up by consistently using r_err for errors and r_reply for messages.
Also fix the abort logic to trigger consistently for all errors that return
to the caller early (e.g., EIO from timeout case). If an abort races with
a reply, use the result from the reply.
Also fix locking for r_err, r_reply update in the reply handler.
Signed-off-by: Sage Weil <sage@newdream.net>
If the tcp connection drops and we reconnect to reestablish a stateful
session (with the mds), we need to resend previously sent (and possibly
received) messages with the _same_ seq # so that they can be dropped on
the other end if needed. Only assign a new seq once after the message is
queued.
Signed-off-by: Sage Weil <sage@newdream.net>
The iterate_session_caps helper traverses the session caps list and tries
to grab an inode reference. However, the __ceph_remove_cap was clearing
the inode backpointer _before_ removing itself from the session list,
causing a null pointer dereference.
Clear cap->ci under protection of s_cap_lock to avoid the race, and to
tightly couple the list and backpointer state. Use a local flag to
indicate whether we are releasing the cap, as cap->session may be modified
by a racing thread in iterate_session_caps.
Signed-off-by: Sage Weil <sage@newdream.net>
We shouldn't leak any prior memory contents to other parties. And random
data, particularly in the 'version' field, can cause problems down the
line.
Signed-off-by: Sage Weil <sage@newdream.net>
The session->s_waiting list is protected by mdsc->mutex, not s_mutex. This
was causing (rare) s_waiting list corruption.
Fix errors paths too, while we're here. A more thorough cleanup of this
function is coming soon.
Signed-off-by: Sage Weil <sage@newdream.net>
OSD requests need to be resubmitted on any pg mapping change, not just when
the pg primary changes. Resending only when the primary changes results in
occasional 'hung' requests during osd cluster recovery or rebalancing.
Signed-off-by: Sage Weil <sage@newdream.net>
It's possible the MDS will not issue caps on a snapped inode, in which case
an open request may not __ceph_get_fmode(), botching the open file
counting. (This is actually a server bug, but the client shouldn't BUG out
in this case.)
Signed-off-by: Sage Weil <sage@newdream.net>
The osd request wasn't being unregistered when the osd returned a failure
code, even though the result was returned to the caller. This would cause
it to eventually time out, and then crash the kernel when it tried to
resend the request using a stale page vector.
Signed-off-by: Sage Weil <sage@newdream.net>
The ->writepages writeback_control is not still valid in the writepages
completion. We were touching it solely to adjust pages_skipped when there
was a writeback error (EIO, ENOSPC, EPERM due to bad osd credentials),
causing an oops in the writeback code shortly thereafter. Updating
pages_skipped on error isn't correct anyway, so let's just rip out this
(clearly broken) code to pass the wbc to the completion.
Signed-off-by: Sage Weil <sage@newdream.net>
Unregister and destroy the bdi in put_super, after mount is r/o, but before
put_anon_super releases the device name.
For symmetry, bdi_destroy in destroy_client (we bdi_init in create_client).
Only set s_bdi if bdi_register succeeds, since we use it to decide whether
to bdi_unregister.
Signed-off-by: Sage Weil <sage@newdream.net>
It's useless, since our allocations are already a power of 2. And it was
allocated per-instance (not globally), which caused a name collision when
we tried to mount a second file system with auth_x enabled.
Signed-off-by: Sage Weil <sage@newdream.net>
If a rename operation is resent to the MDS following an MDS restart, the
client does not get a full reply (containing the resulting metadata) back.
In that case, a ceph_rename() needs to compensate by doing anything useful
that fill_inode() would have, like d_move().
It also needs to invalidate the dentry (to workaround the vfs_rename_dir()
bug) and clear the dir complete flag, just like fill_trace().
Signed-off-by: Sage Weil <sage@newdream.net>
We can get old message seq #'s after a tcp reconnect for stateful sessions
(i.e., the MDS). If we get a higher seq #, that is an error, and we
shouldn't see any bad seq #'s for stateless (mon, osd) connections.
Signed-off-by: Sage Weil <sage@newdream.net>
The snap realm split was checking i_snap_realm, not the list_head, to
determine if an inode belonged in the new realm. The check always failed,
which meant we always moved the inode, corrupting the old realm's list and
causing various crashes.
Also wait to release old realm reference to avoid possibility of use after
free.
Signed-off-by: Sage Weil <sage@newdream.net>
d_move() reorders the d_subdirs list, breaking the readdir result caching.
Unless/until d_move preserves that ordering, clear CEPH_I_COMPLETE on
rename.
Signed-off-by: Sage Weil <sage@newdream.net>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
ceph: use separate class for ceph sockets' sk_lock
ceph: reserve one more caps space when doing readdir
ceph: queue_cap_snap should always queue dirty context
ceph: fix dentry reference leak in dcache readdir
ceph: decode v5 of osdmap (pool names) [protocol change]
ceph: fix ack counter reset on connection reset
ceph: fix leaked inode ref due to snap metadata writeback race
ceph: fix snap context reference leaks
ceph: allow writeback of snapped pages older than 'oldest' snapc
ceph: fix dentry rehashing on virtual .snap dir
Use a separate class for ceph sockets to prevent lockdep confusion.
Because ceph sockets only get passed kernel pointers, there is no
dependency from sk_lock -> mmap_sem. If we share the same class as other
sockets, lockdep detects a circular dependency from
mmap_sem (page fault) -> fs mutex -> sk_lock -> mmap_sem
because dependencies are noted from both ceph and user contexts. Using
a separate class prevents the sk_lock(ceph) -> mmap_sem dependency and
makes lockdep happy.
Signed-off-by: Sage Weil <sage@newdream.net>
We were missing space for the directory cap. The result was a BUG at
fs/ceph/caps.c:2178.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
This simplifies the calling convention, and fixes a bug where we queue a
capsnap with a context other than i_head_snapc (the one that matches the
dirty pages). The result was a BUG at fs/ceph/caps.c:2178 on writeback
completion when a capsnap matching the writeback snapc could not be found.
Signed-off-by: Sage Weil <sage@newdream.net>
When filldir returned an error (e.g. buffer full for a large directory),
we would leak a dentry reference, causing an oops on umount.
Signed-off-by: Sage Weil <sage@newdream.net>
Teach the client to decode an updated format for the osdmap. The new
format includes pool names, which will be useful shortly. Get this change
in earlier rather than later.
Signed-off-by: Sage Weil <sage@newdream.net>
If in_seq_acked isn't reset along with in_seq, we don't ack received
messages until we reach the old count, consuming gobs memory on the other
end of the connection and introducing a large delay when those messages
are eventually deleted.
Signed-off-by: Sage Weil <sage@newdream.net>
We create a ceph_cap_snap if there is dirty cap metadata (for writeback to
mds) OR dirty pages (for writeback to osd). It is thus possible that the
metadata has been written back to the MDS but the OSD data has not when
the cap_snap is created. This results in a cap_snap with dirty(caps) == 0.
The problem is that cap writeback to the MDS isn't necessary, and a
FLUSHSNAP cap op gets no ack from the MDS. This leaves the cap_snap
attached to the inode along with its inode reference.
Fix the problem by dropping the cap_snap if it becomes 'complete' (all
pages written out) and dirty(caps) == 0 in ceph_put_wrbuffer_cap_refs().
Also, BUG() in __ceph_flush_snaps() if we encounter a cap_snap with
dirty(caps) == 0.
Signed-off-by: Sage Weil <sage@newdream.net>
The get_oldest_context() helper takes a reference to the returned snap
context, but most callers weren't dropping that reference. Fix them.
Also drop the unused locked __get_oldest_context() variant.
Signed-off-by: Sage Weil <sage@newdream.net>
On snap deletion, we don't regenerate ceph_cap_snaps for inodes with dirty
pages because deletion does not affect metadata writeback. However, we
did run into problems when we went to write back the pages because the
'oldest' snapc is determined by the oldest cap_snap, and that may be the
newer snapc that reflects the deletion. This caused confusion and an
infinite loop in ceph_update_writeable_page().
Change the snapc checks to allow writeback of any snapc that is equal to
OR older than the 'oldest' snapc.
When there are no cap_snaps, we were also using the realm's latest snapc
for writeback, which complicates ceph_put_wrbufffer_cap_refs(). Instead,
use i_head_snapc, the most snapc used for the most recent ('head') data.
This makes the writeback snapc (ceph_osd_request.r_snapc) _always_ match a
capsnap or i_head_snapc.
Also, in writepags_finish(), drop the snapc referenced by the _page_
and do not assume it matches the request snapc (it may not anymore).
Signed-off-by: Sage Weil <sage@newdream.net>
If a lookup fails on the magic .snap directory, we bind it to a magic
snap directory inode in ceph_lookup_finish(). That code assumes the dentry
is unhashed, but a recent server-side change started returning NULL leases
on lookup failure, causing the .snap dentry to be hashed and NULL by
ceph_fill_trace().
This causes dentry hash chain corruption, or a dies when d_rehash()
includes
BUG_ON(!d_unhashed(entry));
So, avoid processing the NULL dentry lease if it the dentry matches the
snapdir name in ceph_fill_trace(). That allows the lookup completion to
properly bind it to the snapdir inode. BUG there if dentry is hashed to
be sure.
Signed-off-by: Sage Weil <sage@newdream.net>
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
There was a use after free in __unregister_request that would trigger
whenever the request map held the last reference. This appears to have
triggered an oops during 'umount -f' when requests are being torn down.
Signed-off-by: Sage Weil <sage@newdream.net>
Clear pointer to mds request after dropping the reference to
ensure we don't drop it again, as there is at least one error
path through this function that does not reset fi->last_readdir
to a new value.
Signed-off-by: Sage Weil <sage@newdream.net>
Fix a broken check that a reply came back from the same MDS we sent the
request to. I don't think a case that actually triggers this would ever
come up in practice, but it's clearly wrong and easy to fix.
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
Return ERR_PTR(-ENOMEM) if kmalloc() fails. We handle allocation
failures the same way later in the function.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
Currently, if the wait_event_interruptible is interrupted, we
return EAGAIN unconditionally and loop, such that we aren't, in
fact, interruptible. So, propagate ERESTARTSYS if we get it.
Signed-off-by: Sage Weil <sage@newdream.net>
We were rebuilding the snap context when it was not necessary
(i.e. when the realm seq hadn't changed _and_ the parent seq
was still older), which caused page snapc pointers to not match
the realm's snapc pointer (even though the snap context itself
was identical). This confused begin_write and put it into an
endless loop.
The correct logic is: rebuild snapc if _my_ realm seq changed, or
if my parent realm's seq is newer than mine (and thus mine needs
to be rebuilt too).
Signed-off-by: Sage Weil <sage@newdream.net>
We get a fault callback on _every_ tcp connection fault. Normally, we
want to reopen the connection when that happens. If the address we have
is bad, however, and connection attempts always result in a connection
refused or similar error, explicitly closing and reopening the msgr
connection just prevents the messenger's backoff logic from kicking in.
The result can be a console full of
[ 3974.417106] ceph: osd11 10.3.14.138:6800 connection failed
[ 3974.423295] ceph: osd11 10.3.14.138:6800 connection failed
[ 3974.429709] ceph: osd11 10.3.14.138:6800 connection failed
Instead, if we get a fault, and have outstanding requests, but the osd
address hasn't changed and the connection never successfully connected in
the first place, do nothing to the osd connection. The messenger layer
will back off and retry periodically, because we never connected and thus
the lossy bit is not set.
Instead, touch each request's r_stamp so that handle_timeout can tell the
request is still alive and kicking.
Signed-off-by: Sage Weil <sage@newdream.net>
Make variable name slightly more generic, since it will (soon)
reflect either the time the request was sent OR the time it was
last determined to be still retrying.
Signed-off-by: Sage Weil <sage@newdream.net>
The messenger fault was clearing the BUSY bit, for reasons unclear. This
made it possible for the con->ops->fault function to reopen the connection,
and requeue work in the workqueue--even though the current thread was
already in con_work.
This avoids a problem where the client busy loops with connection failures
on an unreachable OSD, but doesn't address the root cause of that problem.
Signed-off-by: Sage Weil <sage@newdream.net>
Prevent duplicate 'mds0 caps stale' message from spamming the console every
few seconds while the MDS restarts. Set s_renew_requested earlier, so that
we only print the message once, even if we don't send an actual request.
Signed-off-by: Sage Weil <sage@newdream.net>
The incremental map decoding of pg pool updates wasn't skipping
the snaps and removed_snaps vectors. This caused osd requests
to stall when pool snapshots were created or fs snapshots were
deleted. Use a common helper for full and incremental map
decoders that decodes pools properly.
Signed-off-by: Sage Weil <sage@newdream.net>
The wait_unsafe_requests() helper dropped the mdsc mutex to wait
for each request to complete, and then examined r_node to get the
next request after retaking the lock. But the request completion
removes the request from the tree, so r_node was always undefined
at this point. Since it's a small race, it usually led to a
valid request, but not always. The result was an occasional
crash in rb_next() while dereferencing node->rb_left.
Fix this by clearing the rb_node when removing the request from
the request tree, and not walking off into the weeds when we
are done waiting for a request. Since the request we waited on
will _always_ be out of the request tree, take a ref on the next
request, in the hopes that it won't be. But if it is, it's ok:
we can start over from the beginning (and traverse over older read
requests again).
Signed-off-by: Sage Weil <sage@newdream.net>
We were releasing used caps (e.g. FILE_CACHE) from encode_inode_release
with MDS requests (e.g. setattr). We don't carry refs on most caps, so
this code worked most of the time, but for setattr (utimes) we try to
drop Fscr.
This causes cap state to get slightly out of sync with reality, and may
result in subsequent mds revoke messages getting ignored.
Fix by only releasing unused caps.
Signed-off-by: Sage Weil <sage@newdream.net>
Drop session mutex unconditionally in handle_cap_grant, and do the
check_caps from the handle_cap_grant helper. This avoids using a magic
return value.
Also avoid using a flag variable in the IMPORT case and call
check_caps at the appropriate point.
Signed-off-by: Sage Weil <sage@newdream.net>
Passing a session pointer to ceph_check_caps() used to mean it would leave
the session mutex locked. That wasn't always possible if it wasn't passed
CHECK_CAPS_AUTHONLY. If could unlock the passed session and lock a
differet session mutex, which was clearly wrong, and also emitted a
warning when it a racing CPU retook it and we did an unlock from the wrong
context.
This was only a problem when there was more than one MDS.
First, make ceph_check_caps unconditionally drop the session mutex, so that
it is free to lock other sessions as needed. Then adjust the one caller
that passes in a session (handle_cap_grant) accordingly.
Signed-off-by: Sage Weil <sage@newdream.net>
This causes an oops when debug output is enabled and we kick
an osd request with no current r_osd (sometime after an osd
failure). Check the pointer before dereferencing.
Signed-off-by: Sage Weil <sage@newdream.net>
Previously we would decode state directly into our current ticket_handler.
This is problematic if for some reason we fail to decode, because we end
up with half new state and half old state.
We are probably already in bad shape if we get an update we can't decode,
but we may as well be tidy anyway. Decode into new_* temporaries and
update the ticket_handler only on success.
Signed-off-by: Sage Weil <sage@newdream.net>
Release the old ticket_blob buffer when we get an updated service ticket
from the monitor. Previously these were getting leaked.
Signed-off-by: Sage Weil <sage@newdream.net>
The buffer size was incorrectly calculated for the ceph_x_encrypt()
encapsulated ticket blob. Use a helper (with correct arithmetic) and
BUG out if we were wrong.
Signed-off-by: Sage Weil <sage@newdream.net>
We were failing to reconnect to services due to an old authenticator, even
though we had the new ticket, because we weren't properly retrying the
connect handshake, because we were calling an old/incorrect helper that
left in_base_pos incorrect. The result was a failure to reconnect to the
OSD or MDS (with an authentication error) if the MDS restarted after the
service had been up a few hours (long enough for the original authenticator
to be invalid). This was only a problem if the AUTH_X authentication was
enabled.
Now that the 'negotiate' and 'connect' stages are fully separated, we
should use the prepare_read_connect() helper instead, and remove the
obsolete one.
Signed-off-by: Sage Weil <sage@newdream.net>
When an inode was dropped while being migrated between two MDSs,
i_cap_exporting_issued was non-zero such that issue caps were non-zero and
__ceph_is_any_caps(ci) was true. This prevented the inode from being
removed from the snap realm, even as it was dropped from the cache.
Fix this by dropping any residual i_snap_realm ref in destroy_inode.
Signed-off-by: Sage Weil <sage@newdream.net>
All ci->i_snap_realm_item/realm->inodes_with_caps manipulation should be
protected by realm->inodes_with_caps_lock. This bug would have only bit
us in a rare race with a realm split (during some snap creations).
Signed-off-by: Sage Weil <sage@newdream.net>
Added assertion, and cleared one case where the implemented caps were
not following the issued caps.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
This simplifies the process of timing out messages. We
keep lru of current messages that are in flight. If a
timeout has passed, we reset the osd connection, so that
messages will be retransmitted. This is a failsafe in case
we hit some sort of problem sending out message to the OSD.
Normally, we'll get notification via an updated osdmap if
there are problems.
If a request is older than the keepalive timeout, send a
keepalive to ensure we detect any breaks in the TCP connection.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
The flush_dirty_caps() used to loop over the first entry of the cap_dirty
dirty list on the assumption that after calling ceph_check_caps() it would
be removed from the list. This isn't true for caps that are being
migrated between MDSs, where we've received the EXPORT but not the IMPORT.
Instead, do a safe list iteration, and pin the next inode on the list via
the CEPH_I_NOFLUSH flag.
Signed-off-by: Sage Weil <sage@newdream.net>
We should include caps that are mid-migration (we've received the EXPORT,
but not the IMPORT) in the issued caps set.
Signed-off-by: Sage Weil <sage@newdream.net>
Verify the file is actually open for the given caps when we are
waiting for caps. This ensures we will wake up and return EBADF
if another thread closes the file out from under us.
Note that EBADF is also the correct return code from write(2)
when called on a file handle opened for reading (although the
vfs should catch that).
Signed-off-by: Sage Weil <sage@newdream.net>
We didn't set the front length correctly. When messages used
the message pool we ended up with the conservative max (4 KB), and
the rest of the time the slightly less conservative estimate. Even
though the OSD ignores the extra data, set it to the right value to avoid
sending extra data over the network.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
Reset msg front len when a message is returned to the pool: the caller
may have changed it.
BUG if we try to send a message with a hdr.front_len that doesn't match
the front iov.
Signed-off-by: Sage Weil <sage@newdream.net>
This was simply broken. Apparently at some point we thought about putting
the snaptrace in the middle section, but didn't.
Signed-off-by: Sage Weil <sage@newdream.net>
Clear LOSSYTX bit, so that if/when we reconnect, said reconnect
will retry on failure.
Clear _PENDING bits too, to avoid polluting subsequent
connection state.
Drop unused REGISTERED bit.
Signed-off-by: Sage Weil <sage@newdream.net>
Move any out_sent messages to out_queue _before_ checking if
out_queue is empty and going to STANDBY, or else we may drop
something that was never acked.
And clean up the code a bit (less goto).
Signed-off-by: Sage Weil <sage@newdream.net>
This fixes lock ABBA inversion, as the ->invalidate_authorizer()
op may need to take a lock (or even call back into the
messenger).
Signed-off-by: Sage Weil <sage@newdream.net>
The tid is in the message header, not body. Broken since 6df058c0.
No need to look at next mds session; just mark the request and be done.
(The old error path was broken too, but now it's gone.)
Signed-off-by: Sage Weil <sage@newdream.net>
Verify the mds session is currently registered before handling
incoming messages. Clean up message handlers to pull mds out
of session->s_mds instead of less trustworthy src field.
Clean up con_{get,put} debug output.
Signed-off-by: Sage Weil <sage@newdream.net>
The destroy_inode path needs no inode locks since there are no
inode references. Update __ceph_remove_cap comment to reflect
that it is called without cap->session->s_mutex in this case.
Signed-off-by: Sage Weil <sage@newdream.net>
There is no state in local vars that requires us to loop after temporarily
dropping i_lock.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
Instead of truncating the whole range of pages, we skip those
pages that are dirty or in the middle of writeback. Those pages
will be cleared later when the writeback completes.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
This page should have been removed earlier when the cache cap was
revoked, but a writeback was in flight, so it was skipped. We truncate
it here just as the writeback finishes, while it's still locked.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
We need to know whether there was any page left behind, and not the
return value (the total number of pages invalidated). Look at the mapping
to see if we were successful or not.
Move it all into a helper to simplify the two callers.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
Since we can now create and destroy pg pools, the pool ids will be sparse,
and an array no longer makes sense for looking up by pool id. Use an
rbtree instead.
The OSDMap encoding also no longer has a max pool count (previously used to
allocate the array). There is a new pool_max, that is the largest pool id
we've ever used, although we don't actually need it in the client.
Signed-off-by: Sage Weil <sage@newdream.net>
We need to be able to iterate over all caps on a session with a
possibly slow callback on each cap. To allow this, we used to
prevent cap reordering while we were iterating. However, we were
not safe from races with removal: removing the 'next' cap would
make the next pointer from list_for_each_entry_safe be invalid,
and cause a lock up or similar badness.
Instead, we keep an iterator pointer in the session pointing to
the current cap. As before, we avoid reordering. For removal,
if the cap isn't the current cap we are iterating over, we are
fine. If it is, we clear cap->ci (to mark the cap as pending
removal) but leave it in the session list. In iterate_caps, we
can safely finish removal and get the next cap pointer.
While we're at it, clean up put_cap to not take a cap reservation
context, as it was never used.
Signed-off-by: Sage Weil <sage@newdream.net>
Use a global counter for the minimum number of allocated caps instead of
hard coding a check against readdir_max. This takes into account multiple
client instances, and avoids examining the superblock mount options when a
cap is dropped.
Signed-off-by: Sage Weil <sage@newdream.net>
Call __validate_auth() under monc->mutex, and use helper for
initial hello so that the pending_auth flag is set. This fixes
possible races in which we have an authentication request (hello
or otherwise) pending and send another one. In particular, with
auth_none, we _never_ want to call ceph_build_auth() from
__validate_auth(), since the ->build_request() method is NULL.
Signed-off-by: Sage Weil <sage@newdream.net>
An rbtree is lighter weight, particularly given we will generally have
very few in-flight statfs requests.
Signed-off-by: Sage Weil <sage@newdream.net>
Switch from radix tree to rbtree for snap realms. This is much more
appropriate given that realm keys are few and far between.
Signed-off-by: Sage Weil <sage@newdream.net>
The rbtree is a more appropriate data structure than a radix_tree. It
avoids extra memory usage and simplifies the code.
It also fixes a bug where the debugfs 'mdsc' file wasn't including the
most recent mds request.
Signed-off-by: Sage Weil <sage@newdream.net>
This ensures that if/when we reopen the connection, we can requeue work on
the connection immediately, without waiting for an old timer to expire.
Queue new delayed work inside con->mutex to avoid any race.
This fixes problems with clients failing to reconnect to the MDS due to
the client_reconnect message arriving too late (due to waiting for an old
delayed work timeout to expire).
Signed-off-by: Sage Weil <sage@newdream.net>
Fix the messenger to allow a ceph_con_open() during the fault callback.
Previously the work wasn't getting queued on the connection because the
fault path avoids requeued work (normally spurious). Loop on reopening by
checking for the OPENING state bit.
This fixes OSD reconnects when a TCP connection drops.
Signed-off-by: Sage Weil <sage@newdream.net>
A single osd connection fault (e.g. tcp disconnect) wasn't
reopening the connection, which causes all current and future
requests for that osd to hang.
Signed-off-by: Sage Weil <sage@newdream.net>
The test was backwards from commit b3d1dbbd: keep the message if the
connection _isn't_ lossy. This allows the client to continue when the
TCP connection drops for some reason (network glitch) but both ends
survive.
Signed-off-by: Sage Weil <sage@newdream.net>
We were invalidating mapping pages when dropping FILE_CACHE in
__send_cap(). But ceph_check_caps attempts to invalidate already, and
also checks for success, so we should never get to this point.
Signed-off-by: Sage Weil <sage@newdream.net>
If a sync read gets a short result from the OSD, it may need to do a
getattr to see if it is short due to reaching end-of-file. The getattr
was being done while holding a reference to FILE_RD, which can lead to
a deadlock if the MDS is revoking that capability bit and can't process
the getattr until it does.
We fix this by setting a flag if EOF size validation is needed, and doing
the getattr in ceph_aio_read, after the RD cap ref is dropped. If the
read needs to be continued, we loop and continue traversing the file.
Signed-off-by: Sage Weil <sage@newdream.net>
Try to invalidate pages in ceph_check_caps() if FILE_CACHE is being
revoked. If we fail, queue an immediate async invalidate if FILE_CACHE
is being revoked. (If it's not being revoked, we just queue the caps
for later evaluation later, as per the old behavior.)
Signed-off-by: Sage Weil <sage@newdream.net>
In the cases where we either do a sync read or a write, we
need to make sure that everything in the page cache is flushed.
In the case of a sync write we invalidate the relevant pages,
so that subsequent read/write reflects the new data written.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
A truncation should occur when either we have the
specified caps for the file, or (in cases where we are
not the only ones referencing the file) when it is mapped
or when it is opened. The latter two cases were not
handled.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
Originally ceph_page_mkwrite called ceph_write_begin, hoping that
the returned locked page would be the page that it was requested
to mkwrite. Factored out relevant part of ceph_page_mkwrite and
we lock the right page anyway.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
Zeroing of holes was not done correctly: page_off was miscalculated and
zeroing the tail didn't not adjust the 'read' value to include the zeroed
portion.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
Instead of removing osd connection immediately when the
requests list is empty, put the osd connection on an lru.
Only if that osd has not been used for more than a specified
time, will it be removed.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
The auth_x protocol implements support for a kerberos-like mutual
authentication infrastructure used by Ceph. We do not simply use vanilla
kerberos because of scalability and performance issues when dealing with
a large cluster of nodes providing a single logical service.
Auth_x provides mutual authentication of client and server and protects
against replay and man in the middle attacks. It does not encrypt
the full session over the wire, however, so data payload may still be
snooped.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
Add infrastructure to allow the mon_client to periodically renew its auth
credentials. Also add a messenger callback that will force such a renewal
if a peer rejects our authenticator.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
Helper for decoding into a ceph_buffer, and other misc decoding helpers
we will need.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
We release all the pages, even if the osd response was
different than the number of pages written. This could only
happen due to truncation that arrives the osd in
different order, for which we want the pages released anyway.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
This fixes a bug where the read/write ops arrive the osd after
a following truncation request.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
We never truncate to a smaller size without contacting the MDS.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
Include a type/version in ceph_entity_addr and filepath. Include extra
byte in filepath encoding as necessary.
Signed-off-by: Sage Weil <sage@newdream.net>
This includes treating all the data preallocation and revokation
at the same place, not having to have a special case for
the reserved pages.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Now doing it in the same callback that is also responsible for
allocating the 'front' part of the message. If we get a message
that we haven't got a corresponding tid for, mark it for skipping.
Moving the mutex unlock/lock from the osd alloc_msg callback
to the calling function in the messenger.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Previously, if the MDS request was interrupted, we would unregister the
request and ignore any reply. This could cause the caps or other cache
state to become out of sync. (For instance, aborting dbench and doing
rm -r on clients would complain about a non-empty directory because the
client didn't realize it's aborted file create request completed.)
Even we don't unregister, we still can't process the reply normally because
we are no longer holding the caller's locks (like the dir i_mutex).
So, mark aborted operations with r_aborted, and in the reply handler, be
sure to process all the caps. Do not process the namespace changes,
though, since we no longer will hold the dir i_mutex. The dentry lease
state can also be ignored as it's more forgiving.
Signed-off-by: Sage Weil <sage@newdream.net>
The variable client is initialized twice to the same (side effect-free)
expression. Drop one initialization.
A simplified version of the semantic match that finds this problem is:
(http://coccinelle.lip6.fr/)
// <smpl>
@forall@
idexpression *x;
identifier f!=ERR_PTR;
@@
x = f(...)
... when != x
(
x = f(...,<+...x...+>,...)
|
* x = f(...)
)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Sage Weil <sage@newdream.net>
The ceph_entity_addr erank field is obsolete; remove it. Get rid of
trivial addr comparison helpers while we're at it.
Signed-off-by: Sage Weil <sage@newdream.net>
This fixes a bug, where we had the parent list have dentries with
offsets that are not monotonically increasing, which caused the ceph
dcache_readdir to skip entries.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
The function was broken in the case where there was more than one page
involved, broke the ceph sync_write case.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
Use the ceph_pagelist to encode the MDS reconnect message. We change the
message encoding (protocol change!) at the same time to make our life
easier (we don't know how many snaprealms we have when we start encoding).
An empty message implies the session is closed/does not exist.
Signed-off-by: Sage Weil <sage@newdream.net>
The ceph_pagelist is a simple list of whole pages, strung together via
their lru list_head. It facilitates encoding to a "buffer" of unknown
size. Allow its use in place of the ceph_msg page vector.
This will be used to fix the huge buffer preallocation woes of MDS
reconnection.
Signed-off-by: Sage Weil <sage@newdream.net>
Define supported and required feature set. Fail connection if the server
requires features we do not support (TAG_FEATURES), or if the server does
not support features we require.
Signed-off-by: Sage Weil <sage@newdream.net>
Many (most?) message types include a transaction id. By including it in
the fixed size header, we always have it available even when we are unable
to allocate memory for the (larger, variable sized) message body. This
will allow us to error out the appropriate request instead of (silently)
dropping the reply.
Signed-off-by: Sage Weil <sage@newdream.net>
When we issue an OSD read, we specify a vector of pages that the data is to
be read into. The request may be sent multiple times, to multiple OSDs, if
the osdmap changes, which means we can get more than one reply.
Only read data into the page vector if the reply is coming from the
OSD we last sent the request to. Keep track of which connection is using
the vector by taking a reference. If another connection was already
using the vector before and a new reply comes in on the right connection,
revoke the pages from the other connection.
Signed-off-by: Sage Weil <sage@newdream.net>
Use a single mutex (previously out_mutex) to protect both read and write
activity from concurrent ceph_con_* calls. Drop the mutex when doing
callbacks to avoid nested locking (the callback may need to call something
like ceph_con_close).
Signed-off-by: Sage Weil <sage@newdream.net>
Canceled or timed out osd requests were getting left in the request list
and never deallocated (until umount). Unregister if they are canceled
(control-c) or time out.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil
Dan Carpenter
Yehuda Sadeh
Stephen Rothwell
Linus Torvalds
Tejun Heo
Alexander Beregalov
Julia Lawall