[ Upstream commit 85744f2d93 ]
Fix following coccicheck warning:
./arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c:156:1-33: Function
for_each_matching_node_and_match should have of_node_put() before break
and goto.
Early exits from for_each_matching_node_and_match() should decrement the
node reference counter.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Link: https://lore.kernel.org/r/20211018014503.7598-1-wanjiabing@vivo.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9af026a3b ]
Since the LED multicolor framework support was added in commit
92a81562e6 ("leds: lp55xx: Add multicolor framework support to lp55xx")
LEDs on this platform stopped working.
Fixes: 92a81562e6 ("leds: lp55xx: Add multicolor framework support to lp55xx")
Fixes: ac219bf3c9 ("leds: lp55xx: Convert to use GPIO descriptors")
Signed-off-by: Merlijn Wajer <merlijn@wizzup.org>
Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6248077226 ]
Add generic compatible string "ns16550a" to serial port nodes of Armada
38x.
This makes it possible to use earlycon.
Fixes: 0d3d96ab00 ("ARM: mvebu: add Device Tree description of the Armada 380/385 SoCs")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a92882a4d2 ]
In the decompressor's head.S we need to start with an instruction that
is some kind of NOP, but also mimics as the PE/COFF header, when the
kernel is linked as an UEFI application. The clever solution here is
"tstne r0, #0x4d000", which in the worst case just clobbers the
condition flags, and bears the magic "MZ" signature in the lowest 16 bits.
However the encoding used (0x13105a4d) is actually not valid, since bits
[15:12] are supposed to be 0 (written as "(0)" in the ARM ARM).
Violating this is UNPREDICTABLE, and *can* trigger an UNDEFINED
exception. Common Cortex cores seem to ignore those bits, but QEMU
chooses to trap, so the code goes fishing because of a missing exception
handler at this point. We are just saved by the fact that commonly (with
-kernel or when running from U-Boot) the "Z" bit is set, so the
instruction is never executed. See [0] for more details.
To make things more robust and avoid UNPREDICTABLE behaviour in the
kernel code, lets replace this with a "two-instruction NOP":
The first instruction is an exclusive OR, the effect of which the second
instruction reverts. This does not leave any trace, neither in a
register nor in the condition flags. Also it's a perfectly valid
encoding. Kudos to Peter Maydell for coming up with this gem.
[0] https://lore.kernel.org/qemu-devel/YTPIdbUCmwagL5%2FD@os.inf.tu-dresden.de/T/
Link: https://lore.kernel.org/linux-arm-kernel/20210908162617.104962-1-andre.przywara@arm.com/T/
Fixes: 81a0bc39ea ("ARM: add UEFI stub support")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reported-by: Adam Lackorzynski <adam@l4re.org>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4754eab7e5 ]
Steven Maddox reported in the OpenWrt bugzilla, that his
RaidSonic IB-NAS4220-B was no longer booting with the new
OpenWrt 21.02 (uses linux 5.10's device-tree). However, it was
working with the previous OpenWrt 19.07 series (uses 4.14).
|[ 5.548038] No RedBoot partition table detected in 30000000.flash
|[ 5.618553] Searching for RedBoot partition table in 30000000.flash at offset 0x0
|[ 5.739093] No RedBoot partition table detected in 30000000.flash
|...
|[ 7.039504] Waiting for root device /dev/mtdblock3...
The provided bootlog shows that the RedBoot partition parser was
looking for the partition table "at offset 0x0". Which is strange
since the comment in the device-tree says it should be at 0xfe0000.
Further digging on the internet led to a review site that took
some useful PCB pictures of their review unit back in February 2009.
Their picture shows a Spansion S29GL128N11TFI01 flash chip.
>From Spansion's Datasheet:
"S29GL128N: One hundred twenty-eight 64 Kword (128 Kbyte) sectors"
Steven also provided a "cat /sys/class/mtd/mtd0/erasesize" from his
unit: "131072".
With the 128 KiB Sector/Erasesize in mind. This patch changes the
fis-index-block property to (0xfe0000 / 0x20000) = 0x7f.
Fixes: b5a923f8c7 ("ARM: dts: gemini: Switch to redboot partition parsing")
Reported-by: Steven Maddox <s.maddox@lantizia.me.uk>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Steven Maddox <s.maddox@lantizia.me.uk>
Link: https://lore.kernel.org/r/20211206004334.4169408-1-linus.walleij@linaro.org'
Bugzilla: https://bugs.openwrt.org/index.php?do=details&task_id=4137
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b046049e59 ]
Since the compatible string defined from ilitek,ili9341.yaml is
"st,sf-tc240t-9370-t", "ilitek,ili9341"
so, append "ilitek,ili9341" to avoid the below dtbs_check warning.
arch/arm/boot/dts/stm32f429-disco.dt.yaml: display@1: compatible:
['st,sf-tc240t-9370-t'] is too short
Fixes: a726e2f000 ("ARM: dts: stm32: enable ltdc binding with ili9341, gyro l3gd20 on stm32429-disco board")
Signed-off-by: Dillon Min <dillon.minfei@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 12f332d2dd upstream.
The alternate function of PD20 is 4 as per the datasheet of
sama7g5 and not 5 as defined earlier.
Signed-off-by: Hari Prasath <Hari.PrasathGE@microchip.com>
Fixes: 7540629e2f ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek")
Cc: <stable@vger.kernel.org> # v5.15+
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20211208063553.19807-1-Hari.PrasathGE@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ff083a2d97 upstream.
Protect perf_guest_cbs with RCU to fix multiple possible errors. Luckily,
all paths that read perf_guest_cbs already require RCU protection, e.g. to
protect the callback chains, so only the direct perf_guest_cbs touchpoints
need to be modified.
Bug #1 is a simple lack of WRITE_ONCE/READ_ONCE behavior to ensure
perf_guest_cbs isn't reloaded between a !NULL check and a dereference.
Fixed via the READ_ONCE() in rcu_dereference().
Bug #2 is that on weakly-ordered architectures, updates to the callbacks
themselves are not guaranteed to be visible before the pointer is made
visible to readers. Fixed by the smp_store_release() in
rcu_assign_pointer() when the new pointer is non-NULL.
Bug #3 is that, because the callbacks are global, it's possible for
readers to run in parallel with an unregisters, and thus a module
implementing the callbacks can be unloaded while readers are in flight,
resulting in a use-after-free. Fixed by a synchronize_rcu() call when
unregistering callbacks.
Bug #1 escaped notice because it's extremely unlikely a compiler will
reload perf_guest_cbs in this sequence. perf_guest_cbs does get reloaded
for future derefs, e.g. for ->is_user_mode(), but the ->is_in_guest()
guard all but guarantees the consumer will win the race, e.g. to nullify
perf_guest_cbs, KVM has to completely exit the guest and teardown down
all VMs before KVM start its module unload / unregister sequence. This
also makes it all but impossible to encounter bug #3.
Bug #2 has not been a problem because all architectures that register
callbacks are strongly ordered and/or have a static set of callbacks.
But with help, unloading kvm_intel can trigger bug #1 e.g. wrapping
perf_guest_cbs with READ_ONCE in perf_misc_flags() while spamming
kvm_intel module load/unload leads to:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP
CPU: 6 PID: 1825 Comm: stress Not tainted 5.14.0-rc2+ #459
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:perf_misc_flags+0x1c/0x70
Call Trace:
perf_prepare_sample+0x53/0x6b0
perf_event_output_forward+0x67/0x160
__perf_event_overflow+0x52/0xf0
handle_pmi_common+0x207/0x300
intel_pmu_handle_irq+0xcf/0x410
perf_event_nmi_handler+0x28/0x50
nmi_handle+0xc7/0x260
default_do_nmi+0x6b/0x170
exc_nmi+0x103/0x130
asm_exc_nmi+0x76/0xbf
Fixes: 39447b386c ("perf: Enhance perf to allow for guest statistic collection from host")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211111020738.2512932-2-seanjc@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9cb6de45a0 upstream.
The reset GPIO was marked active-high, which is against what's specified
in the documentation. Mark the reset GPIO as active-low. With this
change, Bluetooth can now be used on the i9100.
Fixes: 8620cc2f99 ("ARM: dts: exynos: Add devicetree file for the Galaxy S2")
Cc: stable@vger.kernel.org
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20211031234137.87070-1-paul@crapouillou.net
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c8013355ea ]
Since [1], added in 5.7, the absence of a gpio-ranges property has
prevented GPIOs from being restored to inputs when released.
Add those properties for BCM283x and BCM2711 devices.
[1] commit 2ab73c6d83 ("gpio: Support GPIO controllers without
pin-ranges")
Link: https://lore.kernel.org/r/20220104170247.956760-1-linus.walleij@linaro.org
Fixes: 2ab73c6d83 ("gpio: Support GPIO controllers without pin-ranges")
Fixes: 266423e60e ("pinctrl: bcm2835: Change init order for gpio hogs")
Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Reported-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20211206092237.4105895-3-phil@raspberrypi.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4bc5e64e6c upstream.
Commit 8633ef82f1 ("drivers/firmware: consolidate EFI framebuffer setup
for all arches") made the Generic System Framebuffers (sysfb) driver able
to be built on non-x86 architectures.
But it left the efifb_setup_from_dmi() function prototype declaration in
the architecture specific headers. This could lead to the following
compiler warning as reported by the kernel test robot:
drivers/firmware/efi/sysfb_efi.c:70:6: warning: no previous prototype for function 'efifb_setup_from_dmi' [-Wmissing-prototypes]
void efifb_setup_from_dmi(struct screen_info *si, const char *opt)
^
drivers/firmware/efi/sysfb_efi.c:70:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
void efifb_setup_from_dmi(struct screen_info *si, const char *opt)
Fixes: 8633ef82f1 ("drivers/firmware: consolidate EFI framebuffer setup for all arches")
Reported-by: kernel test robot <lkp@intel.com>
Cc: <stable@vger.kernel.org> # 5.15.x
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20211126001333.555514-1-javierm@redhat.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8536a5ef88 upstream.
The Thumb2 version of the FP exception handling entry code treats the
register holding the CP number (R8) differently, resulting in the iWMMXT
CP number check to be incorrect.
Fix this by unifying the ARM and Thumb2 code paths, and switch the
order of the additions of the TI_USED_CP offset and the shifted CP
index.
Cc: <stable@vger.kernel.org>
Fixes: b86040a59f ("Thumb-2: Implementation of the unified start-up and exceptions code")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7202216a6f ]
__secondary_data used to reside in r7 around call to
PROCINFO_INITFUNC. After commit 95731b8ee6 ("ARM: 9059/1: cache-v7:
get rid of mini-stack") r7 is used as a scratch register, so we have
to reload __secondary_data before we setup the stack pointer.
Fixes: 95731b8ee6 ("ARM: 9059/1: cache-v7: get rid of mini-stack")
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 39e660687a ]
Currently, the imx6q-wandboard Ethernet does not transmit any
data.
This issue has been exposed by commit f5d9aa79df ("ARM: imx6q:
remove clk-out fixup for the Atheros AR8031 and AR8035 PHYs").
Fix it by describing the qca,clk-out-frequency property as suggested
by the commit above.
Fixes: 77591e4245 ("ARM: dts: imx6qdl-wandboard: add ethernet PHY description")
Signed-off-by: Martin Haaß <vvvrrooomm@gmail.com>
Tested-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 737e65c795 upstream.
According to the i.MX6ULL Reference Manual, pad CSI_DATA07 may
have the ESAI_TX0 functionality, not ESAI_T0.
Also, NXP's i.MX Config Tools 10.0 generates dtsi with the
MX6ULL_PAD_CSI_DATA07__ESAI_TX0 naming, so fix it accordingly.
There are no devicetree users in mainline that use the old name,
so just remove the old entry.
Fixes: c201369d4a ("ARM: dts: imx6ull: add imx6ull support")
Reported-by: George Makarov <georgemakarov1@gmail.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 187bea4726 ]
When CONFIG_FORTIFY_SOURCE is set, memcpy() checks the potential
buffer overflow and panics. The code in sofcpga bootstrapping
contains the memcpy() calls are mistakenly translated as the shorter
size, hence it triggers a panic as if it were overflowing.
This patch changes the secondary_trampoline and *_end definitions
to arrays for avoiding the false-positive crash above.
Fixes: 9c4566a117 ("ARM: socfpga: Enable SMP for socfpga")
Suggested-by: Kees Cook <keescook@chromium.org>
Buglink: https://bugzilla.suse.com/show_bug.cgi?id=1192473
Link: https://lore.kernel.org/r/20211117193244.31162-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98481f3d72 ]
The PCIe host bridge has two interrupt lines, one that goes towards it
PCIE_INTR2 second level interrupt controller and one for its MSI second
level interrupt controller. The first interrupt line is not currently
managed by the driver, which is why it was not a functional problem.
The interrupt-map property was also only listing the PCI_INTA interrupts
when there are also the INTB, C and D.
Reported-by: Jim Quinlan <jim2101024@gmail.com>
Fixes: d5c8dc0d4c ("ARM: dts: bcm2711: Enable PCIe controller")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 40f7342f05 ]
The GPIO controller is also an interrupt controller provider and is
currently missing the appropriate 'interrupt-controller' and
'#interrupt-cells' properties to denote that.
Fixes: fb026d3de3 ("ARM: BCM5301X: Add Broadcom's bus-axi to the DTS file")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 754c4050a0 ]
The I2C interrupt controller line is off by 32 because the datasheet
describes interrupt inputs into the GIC which are for Shared Peripheral
Interrupts and are starting at offset 32. The ARM GIC binding expects
the SPI interrupts to be numbered from 0 relative to the SPI base.
Fixes: bb097e3e00 ("ARM: dts: BCM5301X: Add I2C support to the DT")
Tested-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 825c43f50e upstream.
The kmap_local conversion broke the ARM architecture, because the new
code assumes that all PTEs used for creating kmaps form a linear array
in memory, and uses array indexing to look up the kmap PTE belonging to
a certain kmap index.
On ARM, this cannot work, not only because the PTE pages may be
non-adjacent in memory, but also because ARM/!LPAE interleaves hardware
entries and extended entries (carrying software-only bits) in a way that
is not compatible with array indexing.
Fortunately, this only seems to affect configurations with more than 8
CPUs, due to the way the per-CPU kmap slots are organized in memory.
Work around this by permitting an architecture to set a Kconfig symbol
that signifies that the kmap PTEs do not form a lineary array in memory,
and so the only way to locate the appropriate one is to walk the page
tables.
Link: https://lore.kernel.org/linux-arm-kernel/20211026131249.3731275-1-ardb@kernel.org/
Link: https://lkml.kernel.org/r/20211116094737.7391-1-ardb@kernel.org
Fixes: 2a15ba82fa ("ARM: highmem: Switch to generic kmap atomic")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reported-by: Quanyang Wang <quanyang.wang@windriver.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 05e63b48b2 ]
We cannot list all the possible chips used in different board revisions,
just use the generic "jedec,spi-nor" compatible instead. This also
fixes dtbs_check error:
['jedec,spi-nor', 's25fl256s1', 's25fl512s'] is too long
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Reviewed-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1ee1500ef7 ]
This fixes dtbs-check error from simple-bus schema:
soc: thermal-zones: {'type': 'object'} is not allowed for {'cpu-thermal': ..... }
From schema: /home/leo/.local/lib/python3.8/site-packages/dtschema/schemas/simple-bus.yaml
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 51b9e22ffd ]
gpmc,mux-add-data is not boolean.
Fixes the below errors flagged by dtbs_check.
"ethernet@4,0:gpmc,mux-add-data: True is not of type 'array'"
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6abc4ca5a2 ]
the switch identifies itself as a BCM53012 (rev 5)...
This patch has been tested & verified on OpenWrt's
snapshot with Linux 5.10 (didn't test any older kernels).
The MR32 is able to "talk to the network" as before with
OpenWrt's SWITCHDEV b53 driver.
| b53-srab-switch 18007000.ethernet-switch: found switch: BCM53012, rev 5
| libphy: dsa slave smi: probed
| b53-srab-switch 18007000.ethernet-switch poe (uninitialized):
| PHY [dsa-0.0:00] driver [Generic PHY] (irq=POLL)
| b53-srab-switch 18007000.ethernet-switch: Using legacy PHYLIB callbacks.
| Please migrate to PHYLINK!
| DSA: tree 0 setup
Reported-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7aee0288be ]
AUX2 has slightly wrong voltage and AUX5 doesn't need to be
always on.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 15a563d008 ]
Running dtbs_check yielded the issues with bcm-nsp.dtsi.
Firstly this patch fixes the following message by appending "-bus" to
the mpcore node name:
mpcore@19000000: $nodename:0: 'mpcore@19000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
Secondly mmc node name. The label name can remain as is.
sdhci@21000: $nodename:0: 'sdhci@21000' does not match '^mmc(@.*)?$'
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ee0b56f75 ]
This fixes following error for all BCM5301X dts files:
mdio-bus-mux@18003000: compatible: ['mdio-mux-mmioreg'] is too short
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9dba049b6d ]
This fixes following errors for all BCM5301X dts files:
chipcommonA@18000000: $nodename:0: 'chipcommonA@18000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
mpcore@19000000: $nodename:0: 'mpcore@19000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
mdio-bus-mux@18003000: $nodename:0: 'mdio-bus-mux@18003000' does not match '^mdio-mux[\\-@]?'
dmu@1800c000: $nodename:0: 'dmu@1800c000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ffbe853a3f ]
The operating-points-v2 nodes are named inconsistently, but mostly
either opp_table0 or gpu-opp-table. However, the underscore is an
invalid character for a node name and the thermal zone binding
explicitly requires that zones are called opp-table-*. Let's fix it.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20210901091852.479202-43-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 418ace9992 upstream.
Naresh and Antonio ran into a build failure with latest Debian
armhf compilers, with lots of output like
tmp/ccY3nOAs.s:2215: Error: selected processor does not support `cpsid i' in ARM mode
As it turns out, $(cc-option) fails early here when the FPU is not
selected before CPU architecture is selected, as the compiler
option check runs before enabling -msoft-float, which causes
a problem when testing a target architecture level without an FPU:
cc1: error: '-mfloat-abi=hard': selected architecture lacks an FPU
Passing e.g. -march=armv6k+fp in place of -march=armv6k would avoid this
issue, but the fallback logic is already broken because all supported
compilers (gcc-5 and higher) are much more recent than these options,
and building with -march=armv5t as a fallback no longer works.
The best way forward that I see is to just remove all the checks, which
also has the nice side-effect of slightly improving the startup time for
'make'.
The -mtune=marvell-f option was apparently never supported by any mainline
compiler, and the custom Codesourcery gcc build that did support is
now too old to build kernels, so just use -mtune=xscale unconditionally
for those.
This should be safe to apply on all stable kernels, and will be required
in order to keep building them with gcc-11 and higher.
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=996419
Reported-by: Antonio Terceiro <antonio.terceiro@linaro.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Cc: Matthias Klose <doko@debian.org>
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0d08e7bf0d upstream.
Currently __set_fixmap() bails out with a warning when called in early boot
from early_iounmap(). Fix it, and while at it, make the comment a bit easier
to understand.
Cc: <stable@vger.kernel.org>
Fixes: b089c31c51 ("ARM: 8667/3: Fix memory attribute inconsistencies when using fixmap")
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6f87a74d31 ]
The STM32 SAI subblocks registers offsets are in the range
0x0004 (SAIx_CR1) to 0x0020 (SAIx_DR).
The corresponding range length is 0x20 instead of 0x1c.
Change reg property accordingly.
Fixes: 5afd65c3a0 ("ARM: dts: stm32: add sai support on stm32mp157c")
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2012579b31 ]
The SPI NOR is a bit further away from the SoC on DHCOR than on DHCOM,
which causes additional signal delay. At 108 MHz, this delay triggers
a sporadic issue where the first bit of RX data is not received by the
QSPI controller.
There are two options of addressing this problem, either by using the
DLYB block to compensate the extra delay, or by reducing the QSPI bus
clock frequency. The former requires calibration and that is overly
complex, so opt for the second option.
Fixes: 76045bc457 ("ARM: dts: stm32: Add QSPI NOR on AV96")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 884ea75d79 ]
Fix typo in pinctrl. It did only work because the bootloader
seems to have initialized it.
Fixes: ee32711195 ("ARM: dts: omap3-gta04: Define and use bma180 irq pin")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dcdbc335a9 ]
This went unnoticed until commit 7897b071ac ("net: macb: convert
to phylink") which tickled the problem. The sama5d3 emac has never
been capable of rgmii, and it all just happened to work before that
commit.
Fixes: 21dd0ece34 ("ARM: dts: at91: add devicetree for the Axentia TSE-850")
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/ea781f5e-422f-6cbf-3cf4-d5a7bac9392d@axentia.se
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ccecf6c71 ]
According to YAML validation, and for a future patchset putting this
xo_board reference clock to use as VCO reference parent, add the missing
clock to dsi_phy0.
Fixes: 5a9fc531f6 ("ARM: dts: msm8974: add display support")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210830175739.143401-1-marijn.suijten@somainline.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2aa717473c ]
The s3c24xx_init_intc() returns an error pointer upon failure, not NULL.
let's add an error pointer check in s3c24xx_handle_irq.
s3c_intc[0] is not NULL or ERR, we can simplify the code.
Fixes: 1f629b7a3c ("ARM: S3C24XX: transform irq handling into a declarative form")
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Link: https://lore.kernel.org/r/20210901123557.1043953-1-liu.yun@linux.dev
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c2e6df3eaa ]
pgd_page_vaddr() returns an 'unsigned long' address, causing a warning
with the memcpy() call in kasan_init():
arch/arm/mm/kasan_init.c: In function 'kasan_init':
include/asm-generic/pgtable-nop4d.h:44:50: error: passing argument 2 of '__memcpy' makes pointer from integer without a cast [-Werror=int-conversion]
44 | #define pgd_page_vaddr(pgd) ((unsigned long)(p4d_pgtable((p4d_t){ pgd })))
| ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| |
| long unsigned int
arch/arm/include/asm/string.h:58:45: note: in definition of macro 'memcpy'
58 | #define memcpy(dst, src, len) __memcpy(dst, src, len)
| ^~~
arch/arm/mm/kasan_init.c:229:16: note: in expansion of macro 'pgd_page_vaddr'
229 | pgd_page_vaddr(*pgd_offset_k(KASAN_SHADOW_START)),
| ^~~~~~~~~~~~~~
arch/arm/include/asm/string.h:21:47: note: expected 'const void *' but argument is of type 'long unsigned int'
21 | extern void *__memcpy(void *dest, const void *src, __kernel_size_t n);
| ~~~~~~~~~~~~^~~
Avoid this by adding an explicit typecast.
Link: https://lore.kernel.org/all/CACRpkdb3DMvof3-xdtss0Pc6KM36pJA-iy=WhvtNVnsDpeJ24Q@mail.gmail.com/
Fixes: 5615f69bc2 ("ARM: 9016/2: Initialize the mapping of KASan shadow memory")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 345dac33f5 ]
When configuring the kernel for big-endian, we set either BE-8 or BE-32
based on the CPU architecture level. Until linux-4.4, we did not have
any ARMv7-M platform allowing big-endian builds, but now i.MX/Vybrid
is in that category, adn we get a build error because of this:
arch/arm/kernel/module-plts.c: In function 'get_module_plt':
arch/arm/kernel/module-plts.c:60:46: error: implicit declaration of function '__opcode_to_mem_thumb32' [-Werror=implicit-function-declaration]
This comes down to picking the wrong default, ARMv7-M uses BE8
like ARMv7-A does. Changing the default gets the kernel to compile
and presumably works.
https://lore.kernel.org/all/1455804123-2526139-2-git-send-email-arnd@arndb.de/
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b3ea5d56f2 ]
Currently the stacktrace on clang compiled arm kernel uses the 'lr'
register to find the first frame address from pt_regs. However, that
is wrong after calling another function, because the 'lr' register
is used by 'bl' instruction and never be recovered.
As same as gcc arm kernel, directly use the frame pointer (r11) of
the pt_regs to find the first frame address.
Note that this fixes kretprobe stacktrace issue only with
CONFIG_UNWINDER_FRAME_POINTER=y. For the CONFIG_UNWINDER_ARM,
we need another fix.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
One last set of small fixes for the soc tree:
- Incorrect ethernet phy settings found on i.mx and
allwinner platforms
- a revert for a Qualcomm DT change that caused a boot
regression
- four patches for incorrect settings in i.MX DT files
- new MAINTAINER file entries for dhcom boards
- a Kconfig fix for a reset driver that became unselectable
- three more code changes for bugs in reset drivers
-----BEGIN PGP SIGNATURE-----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=EB7G
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-fixes-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"One last set of small fixes for the soc tree:
- Incorrect ethernet phy settings found on i.mx and allwinner
platforms
- a revert for a Qualcomm DT change that caused a boot regression
- four patches for incorrect settings in i.MX DT files
- new MAINTAINER file entries for dhcom boards
- a Kconfig fix for a reset driver that became unselectable
- three more code changes for bugs in reset drivers"
* tag 'arm-soc-fixes-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: Add maintainers for DHCOM i.MX6 and DHCOM/DHCOR STM32MP1
Revert "arm64: dts: qcom: sm8250: remove bus clock from the mdss node for sm8250 target"
arm64: dts: imx8mm-kontron: Fix connection type for VSC8531 RGMII PHY
arm64: dts: imx8mm-kontron: Fix CAN SPI clock frequency
arm64: dts: imx8mm-kontron: Fix polarity of reg_rst_eth2
arm64: dts: imx8mm-kontron: Set lower limit of VDD_SNVS to 800 mV
arm64: dts: imx8mm-kontron: Make sure SOC and DRAM supply voltages are correct
reset: socfpga: add empty driver allowing consumers to probe
reset: tegra-bpmp: Handle errors in BPMP response
reset: pistachio: Re-enable driver selection
reset: brcmstb-rescal: fix incorrect polarity of status bit
ARM: dts: sun7i: A20-olinuxino-lime2: Fix ethernet phy-mode
arm64: dts: allwinner: h5: NanoPI Neo 2: Fix ethernet node
- Fix clang-related relocation warning in futex code
- Fix incorrect use of get_kernel_nofault()
- Fix bad code generation in __get_user_check() when kasan is enabled
- Ensure TLB function table is correctly aligned
- Remove duplicated string function definitions in decompressor
- Fix link-time orphan section warnings
- Fix old-style function prototype for arch_init_kprobes()
- Only warn about XIP address when not compile testing
- Handle BE32 big endian for keystone2 remapping
-----BEGIN PGP SIGNATURE-----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=cxhy
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
- Fix clang-related relocation warning in futex code
- Fix incorrect use of get_kernel_nofault()
- Fix bad code generation in __get_user_check() when kasan is enabled
- Ensure TLB function table is correctly aligned
- Remove duplicated string function definitions in decompressor
- Fix link-time orphan section warnings
- Fix old-style function prototype for arch_init_kprobes()
- Only warn about XIP address when not compile testing
- Handle BE32 big endian for keystone2 remapping
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9148/1: handle CONFIG_CPU_ENDIAN_BE32 in arch/arm/kernel/head.S
ARM: 9141/1: only warn about XIP address when not compile testing
ARM: 9139/1: kprobes: fix arch_init_kprobes() prototype
ARM: 9138/1: fix link warning with XIP + frame-pointer
ARM: 9134/1: remove duplicate memcpy() definition
ARM: 9133/1: mm: proc-macros: ensure *_tlb_fns are 4B aligned
ARM: 9132/1: Fix __get_user_check failure with ARM KASAN images
ARM: 9125/1: fix incorrect use of get_kernel_nofault()
ARM: 9122/1: select HAVE_FUTEX_CMPXCHG
My intel-ixp42x-welltech-epbx100 no longer boot since 4.14.
This is due to commit 463dbba4d1 ("ARM: 9104/2: Fix Keystone 2 kernel
mapping regression")
which forgot to handle CONFIG_CPU_ENDIAN_BE32 as possible BE config.
Suggested-by: Krzysztof Hałasa <khalasa@piap.pl>
Fixes: 463dbba4d1 ("ARM: 9104/2: Fix Keystone 2 kernel mapping regression")
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
In randconfig builds, we sometimes come across this warning:
arm-linux-gnueabi-ld: XIP start address may cause MPU programming issues
While this is helpful for actual systems to figure out why it
fails, the warning does not provide any benefit for build testing,
so guard it in a check for CONFIG_COMPILE_TEST, which is usually
set on randconfig builds.
Fixes: 216218308c ("ARM: 8713/1: NOMMU: Support MPU in XIP configuration")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Wan Jiabing
Sicelo A. Mhlongo
Marek Behún
Andre Przywara
Christian Lamparter
Dillon Min
Hari Prasath
Sean Christopherson
Paul Cercueil
Phil Elwell
Javier Martinez Canillas
Ard Biesheuvel
Vladimir Murzin
Martin Haaß
Fabio Estevam
Dinh Nguyen
Takashi Iwai
Florian Fainelli
David Heidelberg
Li Yang
Roger Quadros
Linus Walleij
Matthew Hagan
Rafał Miłecki
Maxime Ripard
Arnd Bergmann
Michał Mirosław
Olivier Moysan
Fabrice Gasnier
Marek Vasut
Andreas Kemnade
Peter Rosin
Marijn Suijten
Jackie Liu
Masami Hiramatsu
Linus Torvalds
LABBE Corentin