giveup_all() causes FPU/VMX/VSX facilities to be disabled in a threads
MSR. If the thread performing the giveup was transactional, the kernel
must record which facilities were in use before the giveup as the
thread must have these facilities re-enabled on return to userspace.
>From process.c:
/*
* This is called if we are on the way out to userspace and the
* TIF_RESTORE_TM flag is set. It checks if we need to reload
* FP and/or vector state and does so if necessary.
* If userspace is inside a transaction (whether active or
* suspended) and FP/VMX/VSX instructions have ever been enabled
* inside that transaction, then we have to keep them enabled
* and keep the FP/VMX/VSX state loaded while ever the transaction
* continues. The reason is that if we didn't, and subsequently
* got a FP/VMX/VSX unavailable interrupt inside a transaction,
* we don't know whether it's the same transaction, and thus we
* don't know which of the checkpointed state and the transactional
* state to use.
*/
Calling check_if_tm_restore_required() will set TIF_RESTORE_TM and
save the MSR if needed.
Fixes: c208505 ("powerpc: create giveup_all()")
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Comment from arch/powerpc/kernel/process.c:967:
If userspace is inside a transaction (whether active or
suspended) and FP/VMX/VSX instructions have ever been enabled
inside that transaction, then we have to keep them enabled
and keep the FP/VMX/VSX state loaded while ever the transaction
continues. The reason is that if we didn't, and subsequently
got a FP/VMX/VSX unavailable interrupt inside a transaction,
we don't know whether it's the same transaction, and thus we
don't know which of the checkpointed state and the ransactional
state to use.
restore_math() restore_fp() and restore_altivec() currently may not
restore the registers. It doesn't appear that this is more serious
than a performance penalty. If the math registers aren't restored the
userspace thread will still be run with the facility disabled.
Userspace will not be able to read invalid values. On the first access
it will take an facility unavailable exception and the kernel will
detected an active transaction, at which point it will abort the
transaction. There is the possibility for a pathological case
preventing any progress by transactions, however, transactions
are never guaranteed to make progress.
Fixes: 70fe3d9 ("powerpc: Restore FPU/VEC/VSX if previously used")
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This fixes warning reported from sparse:
pci-ioda.c:451:49: warning: incorrect type in argument 2 (different base types)
Fixes: 262af557dd ("powerpc/powernv: Enable M64 aperatus for PHB3")
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This fixes the warning reported from sparse:
eeh-powernv.c:875:23: warning: constant 0x8000000000000000 is so big it is unsigned long
Fixes: ebe2253127 ("powerpc/powernv: Support PCI slot ID")
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The hub diag-data type is filled with big-endian data by OPAL call
opal_pci_get_hub_diag_data(). We need convert it to CPU-endian value
before using it. The issue is reported by sparse as pointed by Michael
Ellerman:
eeh-powernv.c:1309:21: warning: restricted __be16 degrades to integer
This converts hub diag-data type to CPU-endian before using it in
pnv_eeh_get_and_dump_hub_diag().
Fixes: 2a485ad7c8 ("powerpc/powernv: Drop PHB operation next_error()")
Cc: stable@vger.kernel.org # v4.1+
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The PE number (@frozen_pe_no), filled by opal_pci_next_error() is in
big-endian format. It should be converted to CPU-endian before it is
passed to opal_pci_eeh_freeze_clear() when clearing the frozen state if
the PE is invalid one. As Michael Ellerman pointed out, the issue is
also detected by sparse:
eeh-powernv.c:1541:41: warning: incorrect type in argument 2 (different base types)
This passes CPU-endian PE number to opal_pci_eeh_freeze_clear() and it
should be part of commit <0f36db77643b> ("powerpc/eeh: Fix wrong printed
PE number"), which was merged to 4.3 kernel.
Fixes: 71b540adff ("powerpc/powernv: Don't escalate non-existing frozen PE")
Cc: stable@vger.kernel.org # v4.3+
Suggested-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We supported POWER7 CPUs for bootstrapping little endian, but the
target was always POWER8. Now that POWER7 specific issues are
impacting performance, change the default target to POWER8.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
POWER8 handles unaligned accesses in little endian mode, but commit
0b5e6661ac ("powerpc: Don't set HAVE_EFFICIENT_UNALIGNED_ACCESS on
little endian builds") disabled it for all.
The issue with unaligned little endian accesses is specific to POWER7,
so update the Kconfig check to match. Using the stat() testcase from
commit a75c380c71 ("powerpc: Enable DCACHE_WORD_ACCESS on ppc64le"),
performance improves 15% on POWER8.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
I see quite a lot of static branch mispredictions on a simple
web serving workload. The issue is in __atomic_add_unless(), called
from _atomic_dec_and_lock(). There is no obvious common case, so it
is better to let the hardware predict the branch.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
During context switch, switch_mm() sets our current CPU in mm_cpumask.
We can avoid this atomic sequence in most cases by checking before
setting the bit.
Testing on a POWER8 using our context switch microbenchmark:
tools/testing/selftests/powerpc/benchmarks/context_switch \
--process --no-fp --no-altivec --no-vector
Performance improves 2%.
Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
No real need for this to be pr_warn(), reduce it to pr_info().
Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We are starting to see i40e adapters in recent machines, so enable
it in our configs.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Change a few devices and filesystems that are seldom used any more
from built in to modules. This reduces our vmlinux about 500kB.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When we issue a system reset, every CPU in the box prints an Oops,
including a backtrace. Each of these can be quite large (over 4kB)
and we may end up wrapping the ring buffer and losing important
information.
Bump the base size from 128kB to 256kB and the per CPU size from
4kB to 8kB.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We see big improvements with the VMX crypto functions (often 10x or more),
so enable it as a module.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Align the hot loops in our assembly implementation of memset()
and backwards_memcpy().
backwards_memcpy() is called from tcp_v4_rcv(), so we might
want to optimise this a little more.
Signed-off-by: Anton Blanchard <anton@samba.org>
Reviewed-by: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Pull CPU hotplug updates from Thomas Gleixner:
"Yet another batch of cpu hotplug core updates and conversions:
- Provide core infrastructure for multi instance drivers so the
drivers do not have to keep custom lists.
- Convert custom lists to the new infrastructure. The block-mq custom
list conversion comes through the block tree and makes the diffstat
tip over to more lines removed than added.
- Handle unbalanced hotplug enable/disable calls more gracefully.
- Remove the obsolete CPU_STARTING/DYING notifier support.
- Convert another batch of notifier users.
The relayfs changes which conflicted with the conversion have been
shipped to me by Andrew.
The remaining lot is targeted for 4.10 so that we finally can remove
the rest of the notifiers"
* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
cpufreq: Fix up conversion to hotplug state machine
blk/mq: Reserve hotplug states for block multiqueue
x86/apic/uv: Convert to hotplug state machine
s390/mm/pfault: Convert to hotplug state machine
mips/loongson/smp: Convert to hotplug state machine
mips/octeon/smp: Convert to hotplug state machine
fault-injection/cpu: Convert to hotplug state machine
padata: Convert to hotplug state machine
cpufreq: Convert to hotplug state machine
ACPI/processor: Convert to hotplug state machine
virtio scsi: Convert to hotplug state machine
oprofile/timer: Convert to hotplug state machine
block/softirq: Convert to hotplug state machine
lib/irq_poll: Convert to hotplug state machine
x86/microcode: Convert to hotplug state machine
sh/SH-X3 SMP: Convert to hotplug state machine
ia64/mca: Convert to hotplug state machine
ARM/OMAP/wakeupgen: Convert to hotplug state machine
ARM/shmobile: Convert to hotplug state machine
arm64/FP/SIMD: Convert to hotplug state machine
...
This was not done before the big patches because I only noticed
them afterwards. It has become much easier to see which handlers
are branched to from which exception vectors now, and to see
exactly what vector space is being used for what.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Simple substitution. This is possible now that both parts of the OOL
initial handler get linked into their correct location.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This is not an exception handler as such, it's called from
local_irq_enable(), not exception entry.
Also clean up some now redundant comments at the end of the
consolidation series.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use assembler sections of fixed size and location to arrange the 64-bit
Book3S exception vector code (64-bit Book3E also uses it in head_64.S
for 0x0..0x100).
This allows better flexibility in arranging exception code and hiding
unimportant details behind macros.
Gas sections can be a bit painful to use this way, mainly because the
assembler does not know where they will be finally linked. Taking
absolute addresses requires a bit of trickery for example, but it can
be hidden behind macros for the most part.
Generated code is mostly the same except locations, offsets, alignments.
The "+ 0x2" is only required for the trap number / kvm exit number,
which gets loaded as a constant into a register.
Previously, code also used + 0x2 for label names, but we changed to
using "H" to distinguish HV case for that. Remove the last vestiges
of that.
__after_prom_start is taking absolute address of a label in another
fixed section. Newer toolchains seemed to compile this okay, but older
ones do not. FIXED_SYMBOL_ABS_ADDR is more foolproof, it just takes an
additional line to define.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
With a subsequent patch to put text into different sections,
(_end - _stext) can no longer be computed at link time to determine
the end of the copy. Instead, calculate it at runtime with
(copy_to_here - _stext) + (_end - copy_to_here).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Move exception handler alignment directives into the head-64.h macros,
beause they will no longer work in-place after the next patch. This
slightly changes functions that have alignments applied and therefore
code generation, which is why it was not done initially (see earlier
patch).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Create arch/powerpc/include/asm/head-64.h with macros that specify
an exception vector (name, type, location), which will be used to
label and lay out exceptions into the object file.
Naming is moved out of exception-64s.h, which is used to specify the
implementation of exception handlers.
objdump of generated code in exception vectors is unchanged except for
names. Alignment directives scattered around are annoying, but done
this way so that disassembly can verify identical instruction
generation before and after patch. These get cleaned up in future
patch.
We change the way KVMTEST works, explicitly passing EXC_HV or EXC_STD
rather than overloading the trap number. This removes the need to have
SOFTEN values for the overloaded trap numbers, eg. 0x502.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The driver does not handle endianness properly when loading the input
data.
Signed-off-by: Marcelo Cerri <marcelo.cerri@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
__kernel_get_syscall_map() and __kernel_clock_getres() use cmpli to
check if the passed in pointer is non zero. cmpli maps to a 32 bit
compare on binutils, so we ignore the top 32 bits.
A simple test case can be created by passing in a bogus pointer with
the bottom 32 bits clear. Using a clk_id that is handled by the VDSO,
then one that is handled by the kernel shows the problem:
printf("%d\n", clock_getres(CLOCK_REALTIME, (void *)0x100000000));
printf("%d\n", clock_getres(CLOCK_BOOTTIME, (void *)0x100000000));
And we get:
0
-1
The bigger issue is if we pass a valid pointer with the bottom 32 bits
clear, in this case we will return success but won't write any data
to the pointer.
I stumbled across this issue because the LLVM integrated assembler
doesn't accept cmpli with 3 arguments. Fix this by converting them to
cmpldi.
Fixes: a7f290dad3 ("[PATCH] powerpc: Merge vdso's and add vdso support to 32 bits kernel")
Cc: stable@vger.kernel.org # v2.6.15+
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When PCI Device pass-through is enabled via VFIO, KVM-PPC will
pin pages using get_user_pages_fast(). One of the downsides of
the pinning is that the page could be in CMA region. The CMA
region is used for other allocations like the hash page table.
Ideally we want the pinned pages to be from non CMA region.
This patch (currently only for KVM PPC with VFIO) forcefully
migrates the pages out (huge pages are omitted for the moment).
There are more efficient ways of doing this, but that might
be elaborate and might impact a larger audience beyond just
the kvm ppc implementation.
The magic is in new_iommu_non_cma_page() which allocates the
new page from a non CMA region.
I've tested the patches lightly at my end. The full solution
requires migration of THP pages in the CMA region. That work
will be done incrementally on top of this.
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[mpe: Merged via powerpc tree as that's where the changes are]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This supports PCI surprise hotplug. The design is highlighted as
below:
* The PCI slot's surprise hotplug capability is exposed through
device node property "ibm,slot-surprise-pluggable", meaning
PCI surprise hotplug will be disabled if skiboot doesn't support
it yet.
* The interrupt because of presence or link state change is raised
on surprise hotplug event. One event is allocated and queued to
the PCI slot for workqueue to pick it up and process in serialized
fashion. The code flow for surprise hotplug is same to that for
managed hotplug except: the affected PEs are put into frozen state
to avoid unexpected EEH error reporting in surprise hot remove path.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This unfreezes PE when it's initialized because the PE might be put
into frozen state in the last hot remove path. It's not harmful to
do so if the PE is already in unfrozen state.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This exports eeh_pe_state_mark(). It will be used to mark the surprise
hot removed PE as isolated to avoid unexpected EEH error reporting in
surprise remove path.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This exports @confirm_error_lock so that eeh_serialize_{lock, unlock}()
can be used to freeze the affected PE in PCI surprise hot remove path.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Function eeh_pe_set_option() is used to apply the requested options
(enable, disable, unfreeze) in EEH virtualization path. The semantics
of this function isn't complete until freezing is supported.
This allows to freeze the indicated PE. The new semantics is going to
be used in PCI surprise hot remove path, to freeze removed PCI devices
(PE) to avoid unexpected EEH error reporting.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When issuing PHB reset, OPAL API opal_pci_poll() is called to drive
the state machine in OPAL forward. However, we needn't always call
the function under some circumstances like reset deassert.
This avoids calling opal_pci_poll() when OPAL_SUCCESS is returned
from opal_pci_reset(). Except the overhead introduced by additional
one unnecessary OPAL call, I didn't run into real issue because of
this.
Reported-by: Pridhiviraj Paidipeddi <ppaiddipe@in.ibm.com>
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds an option to use XZ compression for the kernel image.
Currently this is only enabled for 64-bit Book3S targets, which is
roughly equivalent to the platforms that use the kernel's zImage
wrapper, and that have been tested.
The bulk of the 32-bit platforms and 64-bit BookE use uboot images,
which relies on uboot implementing XZ. In future we can enable XZ
support for those targets once someone has tested it.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This modifies the wrapper script so that the -Z option takes an argument
to specify the compression type. It can either be 'gz', 'xz' or 'none'.
The legazy --no-gzip and -z options are still supported and will set the
compression to none and gzip respectively, but they are not documented.
Only XZ -6 is used for compression rather than XZ -9. Using compression
levels higher than 6 requires the decompressor to build a large (64MB)
dictionary when decompressing and some environments cannot satisfy such
large allocations (e.g. POWER 6 LPAR partition firmware).
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This code is no longer used and can be removed.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently the powerpc boot wrapper has its own wrapper around zlib to
handle decompressing gzipped kernels. The kernel decompressor library
functions now provide a generic interface that can be used in the
pre-boot environment. This allows boot wrappers to easily support
different compression algorithms. This patch converts the wrapper to use
this new API, but does not add support for using new algorithms.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Most architectures allow the compression algorithm used to produced the
vmlinuz image to be selected as a kernel config option. In preperation
for supporting algorithms other than gzip in the powerpc boot wrapper
the makefile needs to be modified to use these config options.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The powerpc boot wrapper is potentially compiled with a separate
toolchain and/or toolchain flags than the rest of the kernel. The usual
case is a 64-bit big endian kernel builds a 32-bit big endian wrapper.
The main problem with this is that the wrapper does not have access to
the kernel headers (without a lot of gross hacks). To get around this
the required headers are copied into the build directory via several sed
scripts which rewrite problematic includes. This patch moves these
fixups out of the makefile into a separate .sed script file to clean up
makefile slightly.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
[mpe: Reword first paragraph of change log a little]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
CURRENT_TIME macro is not appropriate for filesystems as it
doesn't use the right granularity for filesystem timestamps.
Use current_time() instead.
CURRENT_TIME is also not y2038 safe.
This is also in preparation for the patch that transitions
vfs timestamps to use 64 bit time and hence make them
y2038 safe. As part of the effort current_time() will be
extended to do range checks. Hence, it is necessary for all
file system timestamps to use current_time(). Also,
current_time() will be transitioned along with vfs to be
y2038 safe.
Note that whenever a single call to current_time() is used
to change timestamps in different inodes, it is because they
share the same time granularity.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Felipe Balbi <balbi@kernel.org>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Acked-by: David Sterba <dsterba@suse.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The MMCR2 register is available twice, one time with number 785
(privileged access), and one time with number 769 (unprivileged,
but it can be disabled completely). In former times, the Linux
kernel was using the unprivileged register 769 only, but since
commit 8dd75ccb57 ("powerpc: Use privileged SPR number
for MMCR2"), it uses the privileged register 785 instead.
The KVM-PR code then of course also switched to use the SPR 785,
but this is causing older guest kernels to crash, since these
kernels still access 769 instead. So to support older kernels
with KVM-PR again, we have to support register 769 in KVM-PR, too.
Fixes: 8dd75ccb57
Cc: stable@vger.kernel.org # v3.10+
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
On POWER8E and POWER8NVL, KVM-PR does not announce support for
64kB page sizes and 1TB segments yet. Looks like this has just
been forgotton so far, since there is no reason why this should
be different to the normal POWER8 CPUs.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Remove duplicate setting of the the "B" field when doing a tlbie(l).
In compute_tlbie_rb(), the "B" field is set again just before
returning the rb value to be used for tlbie(l).
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
We use logical negate where bitwise negate was intended. It means that
we never return -EINVAL here.
Fixes: ce11e48b7f ('KVM: PPC: E500: Add userspace debug stub support')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
This takes out the code that arranges to run two (or more) virtual
cores on a single subcore when possible, that is, when both vcores
are from the same VM, the VM is configured with one CPU thread per
virtual core, and all the per-subcore registers have the same value
in each vcore. Since the VTB (virtual timebase) is a per-subcore
register, and will almost always differ between vcores, this code
is disabled on POWER8 machines, meaning that it is only usable on
POWER7 machines (which don't have VTB). Given the tiny number of
POWER7 machines which have firmware that allows them to run HV KVM,
the benefit of simplifying the code outweighs the loss of this
feature on POWER7 machines.
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
POWER8 has one virtual timebase (VTB) register per subcore, not one
per CPU thread. The HV KVM code currently treats VTB as a per-thread
register, which can lead to spurious soft lockup messages from guests
which use the VTB as the time source for the soft lockup detector.
(CPUs before POWER8 did not have the VTB register.)
For HV KVM, this fixes the problem by making only the primary thread
in each virtual core save and restore the VTB value. With this,
the VTB state becomes part of the kvmppc_vcore structure. This
also means that "piggybacking" of multiple virtual cores onto one
subcore is not possible on POWER8, because then the virtual cores
would share a single VTB register.
PR KVM emulates a VTB register, which is per-vcpu because PR KVM
has no notion of CPU threads or SMT. For PR KVM we move the VTB
state into the kvmppc_vcpu_book3s struct.
Cc: stable@vger.kernel.org # v3.14+
Reported-by: Thomas Huth <thuth@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
- powernv/pci: Fix m64 checks for SR-IOV and window alignment from Russell Currey
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=35xQ
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.8-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull one more powerpc fix from Michael Ellerman:
"powernv/pci: Fix m64 checks for SR-IOV and window alignment from
Russell Currey"
* tag 'powerpc-4.8-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/powernv/pci: Fix m64 checks for SR-IOV and window alignment
Enable the drivers on the powerpc arch.
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Scott Wood <oss@buserror.net>
User space DTLB miss represent approximatly 90% of TLB misses
so make it the shortest path.
Also remove an unneccessary double jump in FixupDAR
Before this patch, we spend 3.3 TB ticks in the handler for each
user address miss and 3.4 TB ticks for each kernel address miss
After this patch, we send 3.0 TB ticks in the handler for each
user address miss and 3.9 TB ticks for each kernel address miss
Taking into account that user misses represent 90% of the total,
this patch provides an improvement of approx. 9%
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <oss@buserror.net>
When all options are activated, there is not enough space for the
DTLBMiss handlers that handles IMMR area and linear RAM pages in
the exception area once we have added hugepage handling.
So lets move them after .0x2000
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <oss@buserror.net>
During a machine check, the 8xx provides indication of
whether the check is due to data or instruction access, so
let's display it.
Lets also move 8xx specific handling into the new handler.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <oss@buserror.net>
When the watchdog is in NMI mode, the system reset interrupt is
generated when the watchdog counter expires.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <oss@buserror.net>
This allows PCI devices that can only address (e.g.) 36 or 40 bit DMA to
use direct DMA, at the cost of not being able to DMA to non-RAM addresses
(this doesn't affect MSIs as there is a separate dedicated window for
that) which we wouldn't have been able to do anyway if the RAM size didn't
trigger the creation of the second inbound window.
It also fixes an off-by-one error that set dma_direct_ops on PCI devices
whose dma mask could address all the space below the DMA offset
(previously 40 bits), but not the window that starts at the DMA offset.
Signed-off-by: Scott Wood <oss@buserror.net>
Cc: Tillmann Heidsieck <theidsieck@leenox.de>
Tested-by: Tillmann Heidsieck <theidsieck@leenox.de>
The 8xx has two special registers called EID (External Interrupt
Disable) and EIE (External Interrupt Enable) for clearing/setting
EE in MSR. It avoids the three instructions set mfmsr/ori/mtmsr or
mfmsr/rlwinm/mtmsr and it avoids using a general register.
We just have to write something in the special register to change MSR EE
bit. So we write r0 into the register, regardless of r0 value.
Writing to one of those two special registers also set the MSR RI bit,
but this bit is only unset during beginning of exception prolog and end
of exception epilog. When executing C-functions MSR RI is always set.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <oss@buserror.net>
Factor out the common codes of setup arch functions to a separate
function. It does make no sense to print a board specific info
in setup arch functions, so use a more general one.
For ASP8347E board, there is no pci device node. So it is safe to
invoke mpc83xx_setup_pci() in its setup arch function even there is
no such invocation in its original setup arch function.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Scott Wood <oss@buserror.net>
Commit 0e6e01ff69 ("CPM/QE: use genalloc to manage CPM/QE muram")
has changed the way muram is managed.
genalloc uses kmalloc(), hence requires the SLAB to be up and running.
On powerpc 8xx, cpm_reset() is called early during startup.
cpm_reset() then calls cpm_muram_init() before SLAB is available,
hence the following Oops.
cpm_reset() cannot be called during initcalls because the CPM is
needed for console.
This patch removes the call to cpm_muram_init() from cpm_reset().
cpm_muram_init() will be called from a new function called cpm_init()
which is declared as subsys_initcall, unless cpm_muram_alloc() is
called earlier for the serial console in which case cpm_muram_init()
will be called from there.
The reason for calling it from two places is that some drivers
(e.g. i2c-cpm) need some of the initialisations done by
cpm_muram_init() but don't call cpm_muram_alloc(). The console
driver calls cpm_muram_alloc() but some platforms might not use
the CPM serial ports for console.
[ 0.000000] Unable to handle kernel paging request for data at address 0x00000008
[ 0.000000] Faulting instruction address: 0xc01acce0
[ 0.000000] Oops: Kernel access of bad area, sig: 11 [#1]
[ 0.000000] PREEMPT CMPC885
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.4.14-g0886ed8 #5
[ 0.000000] task: c05183e0 ti: c0536000 task.ti: c0536000
[ 0.000000] NIP: c01acce0 LR: c0011068 CTR: 00000000
[ 0.000000] REGS: c0537e50 TRAP: 0300 Not tainted (4.4.14-s3k-dev-g0886ed8-svn)
[ 0.000000] MSR: 00001032 <ME,IR,DR,RI> CR: 28044428 XER: 00000000
[ 0.000000] DAR: 00000008 DSISR: c0000000
GPR00: c0011068 c0537f00 c05183e0 00000000 00009000 ffffffff 00000bc0 ffffffff
GPR08: ff003000 ff00b000 ff003bbf 00000000 22044422 100d43a8 00000000 07ff94e8
GPR16: 00000000 07bb5d70 00000000 07ff81f4 07ff81f4 07ff81f4 00000000 00000000
GPR24: 07ffb3a0 07fe7628 c0550000 c7ffa190 c0540000 ff003bbf 00000000 00000001
[ 0.000000] NIP [c01acce0] gen_pool_add_virt+0x14/0xdc
[ 0.000000] LR [c0011068] cpm_muram_init+0xd4/0x18c
[ 0.000000] Call Trace:
[ 0.000000] [c0537f00] [00000200] 0x200 (unreliable)
[ 0.000000] [c0537f20] [c0011068] cpm_muram_init+0xd4/0x18c
[ 0.000000] [c0537f70] [c0494684] cpm_reset+0xb4/0xc8
[ 0.000000] [c0537f90] [c0494c64] cmpc885_setup_arch+0x10/0x30
[ 0.000000] [c0537fa0] [c0493cd4] setup_arch+0x130/0x168
[ 0.000000] [c0537fb0] [c04906bc] start_kernel+0x88/0x380
[ 0.000000] [c0537ff0] [c0002224] start_here+0x38/0x98
[ 0.000000] Instruction dump:
[ 0.000000] 91430010 91430014 80010014 83e1000c 7c0803a6 38210010 4e800020 7c0802a6
[ 0.000000] 9421ffe0 bf61000c 90010024 7c7e1b78 <80630008> 7c9c2378 7cc31c30 3863001f
[ 0.000000] ---[ end trace dc8fa200cb88537f ]---
fixes: 0e6e01ff69 ("CPM/QE: use genalloc to manage CPM/QE muram")
Cc: stable@vger.linux.org
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[scottwood: Removed some string changes unrelated to bugfix]
Signed-off-by: Scott Wood <oss@buserror.net>
Use of_property_read_bool to check for the existence of a property.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression e1,e2;
statement S2,S1;
@@
- if (of_get_property(e1,e2,NULL))
+ if (of_property_read_bool(e1,e2))
S1 else S2
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Scott Wood <oss@buserror.net>
Convert fsl_rstcr_restart into a function to be registered with
register_reset_handler().
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
[scottwood: Converted mvme7100 as well]
Signed-off-by: Scott Wood <oss@buserror.net>
Call out to all restart handlers that were added via
register_restart_handler() API when restarting the machine.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Scott Wood <oss@buserror.net>
Factor out a small bit of common code in machine_restart(),
machine_power_off() and machine_halt().
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Scott Wood <oss@buserror.net>
Halt callback in struct machdep_calls is declared with __noreturn
attribute, so omitting that attribute in gpio_halt_cb()'s signatrue
results in compilation error.
Change the signature to address the problem as well as change the code
of the function to avoid ever returning from the function.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Scott Wood <oss@buserror.net>
Select PHYLIB only if NETDEVICES is enabled and MDIO_BITBANG only if
PHYLIB is present to avoid warnings from Kconfig.
To prevent undefined references during linking register MDIO driver only
if CONFIG_MDIO_BITBANG is enabled.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Scott Wood <oss@buserror.net>
Cyril Bur
Gavin Shan
Anton Blanchard
Linus Torvalds
Nicholas Piggin
Michael Ellerman
Marcelo Cerri
Thomas Gleixner
Balbir Singh
Oliver O'Halloran
Deepa Dinamani
Thomas Huth
Dan Carpenter
Paul Mackerras
Claudiu Manoil
Christophe Leroy
Scott Wood
Kevin Hao
Julia Lawall
Andrey Smirnov