initialize the CRNG is configurable via the boot option
random.trust_cpu={on,off}
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAluVEQAACgkQ8vlZVpUN
gaN4vAgAqQQHYBTlHSYTyh9eEyOOo6gSTnu9mgk6iwejUceoPDcwYiFptZvdpQxj
moNTz31hy2tFHqt8aiNA2CgSMLI6cilLhz9AzeA6UuQe/EGhZeQHtnvKNIct8Zbg
97+b2WipCgspO0hzm8NLCjcvSgu892fBLc1TVl8Z+GxLhTCTAgkrMqLpo2iSR/Xe
+wv2NhT5gAnXFUuHzayiG/wCwSpWNt1cc1DJHVLMFv2yznHL/nagUywO4IeYqaJk
ZeXie9GsMZDsqFMOjCPS98U3/7c6y2FoYtm/O4NRUpQh9T8QP4NPylP3NDlhIxss
ZTu6x9xXKnLBfhHu5qk6LuYMJNW/lQ==
=XP8t
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random
Pull random driver fix from Ted Ts'o:
"Fix things so the choice of whether or not to trust RDRAND to
initialize the CRNG is configurable via the boot option
random.trust_cpu={on,off}"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
random: make CPU trust a boot parameter
Instead of forcing a distro or other system builder to choose
at build time whether the CPU is trusted for CRNG seeding via
CONFIG_RANDOM_TRUST_CPU, provide a boot-time parameter for end users to
control the choice. The CONFIG will set the default state instead.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Subsystem:
- new helpers to add custom sysfs attributes
- struct rtc_task removal along with rtc_irq_register/rtc_irq_unregister
- rtc_irq_set_state and rtc_irq_set_freq are not exported anymore
Drivers:
- armada38x: reset after rtc power loss
- ds1307: now supports m41t11
- isl1208: now supports isl1219 and tamper detection
- pcf2127: internal SRAM support
-----BEGIN PGP SIGNATURE-----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=cAQ9
-----END PGP SIGNATURE-----
Merge tag 'rtc-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"It is now possible to add custom sysfs attributes while avoiding a
possible race condition. Unused code has been removed resulting in a
nice reduction of the code base. And more drivers have been switched
to SPDX by their maintainers.
Summary:
Subsystem:
- new helpers to add custom sysfs attributes
- struct rtc_task removal along with rtc_irq_[un]register()
- rtc_irq_set_state and rtc_irq_set_freq are not exported anymore
Drivers:
- armada38x: reset after rtc power loss
- ds1307: now supports m41t11
- isl1208: now supports isl1219 and tamper detection
- pcf2127: internal SRAM support"
* tag 'rtc-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (34 commits)
rtc: ds1307: simplify hwmon config
rtc: s5m: Add SPDX license identifier
rtc: maxim: Add SPDX license identifiers
rtc: isl1219: add device tree documentation
rtc: isl1208: set ev-evienb bit from device tree
rtc: isl1208: Add "evdet" interrupt source for isl1219
rtc: isl1208: add support for isl1219 with tamper detection
rtc: sysfs: facilitate attribute add to rtc device
rtc: remove struct rtc_task
char: rtc: remove task handling
rtc: pcf85063: preserve control register value between stop and start
rtc: sh: remove unused variable rtc_dev
rtc: unexport rtc_irq_set_*
rtc: simplify rtc_irq_set_state/rtc_irq_set_freq
rtc: remove irq_task and irq_task_lock
rtc: remove rtc_irq_register/rtc_irq_unregister
rtc: sh: remove dead code
rtc: sa1100: don't set PIE frequency
rtc: ds1307: support m41t11 variant
rtc: ds1307: fix data pointer to m41t0
...
Here is the bit set of char/misc drivers for 4.19-rc1
There is a lot here, much more than normal, seems like everyone is
writing new driver subsystems these days... Anyway, major things here
are:
- new FSI driver subsystem, yet-another-powerpc low-level
hardware bus
- gnss, finally an in-kernel GPS subsystem to try to tame all of
the crazy out-of-tree drivers that have been floating around
for years, combined with some really hacky userspace
implementations. This is only for GNSS receivers, but you
have to start somewhere, and this is great to see.
Other than that, there are new slimbus drivers, new coresight drivers,
new fpga drivers, and loads of DT bindings for all of these and existing
drivers.
Full details of everything is in the shortlog.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW3g7ew8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykfBgCeOG0RkSI92XVZe0hs/QYFW9kk8JYAnRBf3Qpm
cvW7a+McOoKz/MGmEKsi
=TNfn
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the bit set of char/misc drivers for 4.19-rc1
There is a lot here, much more than normal, seems like everyone is
writing new driver subsystems these days... Anyway, major things here
are:
- new FSI driver subsystem, yet-another-powerpc low-level hardware
bus
- gnss, finally an in-kernel GPS subsystem to try to tame all of the
crazy out-of-tree drivers that have been floating around for years,
combined with some really hacky userspace implementations. This is
only for GNSS receivers, but you have to start somewhere, and this
is great to see.
Other than that, there are new slimbus drivers, new coresight drivers,
new fpga drivers, and loads of DT bindings for all of these and
existing drivers.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits)
android: binder: Rate-limit debug and userspace triggered err msgs
fsi: sbefifo: Bump max command length
fsi: scom: Fix NULL dereference
misc: mic: SCIF Fix scif_get_new_port() error handling
misc: cxl: changed asterisk position
genwqe: card_base: Use true and false for boolean values
misc: eeprom: assignment outside the if statement
uio: potential double frees if __uio_register_device() fails
eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency
misc: ti-st: Fix memory leak in the error path of probe()
android: binder: Show extra_buffers_size in trace
firmware: vpd: Fix section enabled flag on vpd_section_destroy
platform: goldfish: Retire pdev_bus
goldfish: Use dedicated macros instead of manual bit shifting
goldfish: Add missing includes to goldfish.h
mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux
dt-bindings: mux: add adi,adgs1408
Drivers: hv: vmbus: Cleanup synic memory free path
Drivers: hv: vmbus: Remove use of slow_virt_to_phys()
Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind()
...
Pull TPM updates from James Morris:
- Migrate away from PM runtime as explicit cmdReady/goIdle transactions
for every command is a spec requirement. PM runtime adds only a layer
of complexity on our case.
- tpm_tis drivers can now specify the hwrng quality.
- TPM 2.0 code uses now tpm_buf for constructing messages. Jarkko
thinks Tomas Winkler has done the same for TPM 1.2, and will start
digging those changes from the patchwork in the near future.
- Bug fixes and clean ups
* 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
ima: Get rid of ima_used_chip and use ima_tpm_chip != NULL instead
ima: Use tpm_default_chip() and call TPM functions with a tpm_chip
tpm: replace TPM_TRANSMIT_RAW with TPM_TRANSMIT_NESTED
tpm: Convert tpm_find_get_ops() to use tpm_default_chip()
tpm: Implement tpm_default_chip() to find a TPM chip
tpm: rename tpm_chip_find_get() to tpm_find_get_ops()
tpm: Allow tpm_tis drivers to set hwrng quality.
tpm: Return the actual size when receiving an unsupported command
tpm: separate cmd_ready/go_idle from runtime_pm
tpm/tpm_i2c_infineon: switch to i2c_lock_bus(..., I2C_LOCK_SEGMENT)
tpm_tis_spi: Pass the SPI IRQ down to the driver
tpm: migrate tpm2_get_random() to use struct tpm_buf
tpm: migrate tpm2_get_tpm_pt() to use struct tpm_buf
tpm: migrate tpm2_probe() to use struct tpm_buf
tpm: migrate tpm2_shutdown() to use struct tpm_buf
initializing hashed pointers and (optionally, controlled by a config
option) to initialize the CRNG to avoid boot hangs.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAltyBEkACgkQ8vlZVpUN
gaNZ6wgAhNyYLr2c0V0UnQyvguZXcJLBerqqGh9XvG//66kXUvYfT0NJSd2i7DZ/
u4ypf9NxfG4/emg2DDy3r+K/UjhgCIKKjzfp2MzYeEptJGg9V9EV7v1YtFJYs39g
cPmFv1l7fPNqe3qXXsbuZe2pSnJfEfzHeOStDNrEX1CJStt+LC7HRz1/dIcgycOa
CsB3yILQpgxu9HcVCfIeDtxjly7GQYTJKQGLAe/8MdatZ96HW/E4obvnDZhuFtCH
54OumcKhFXiODFLpBsK3Bllk2v9fO1Gq/SuYmNA85mXqbZVAUV2YNZK2HWASXwkB
NxwRcfLywgqfYmtvpp63rHSjJB76AQ==
=l9HN
-----END PGP SIGNATURE-----
Merge tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random
Pull random updates from Ted Ts'o:
"Some changes to trust cpu-based hwrng (such as RDRAND) for
initializing hashed pointers and (optionally, controlled by a config
option) to initialize the CRNG to avoid boot hangs"
* tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
random: Make crng state queryable
random: remove preempt disabled region
random: add a config option to trust the CPU's hwrng
vsprintf: Add command line option debug_boot_weak_hash
vsprintf: Use hw RNG for ptr_key
random: Return nbytes filled from hw RNG
random: Fix whitespace pre random-bytes work
It is very useful to be able to know whether or not get_random_bytes_wait
/ wait_for_random_bytes is going to block or not, or whether plain
get_random_bytes is going to return good randomness or bad randomness.
The particular use case is for mitigating certain attacks in WireGuard.
A handshake packet arrives and is queued up. Elsewhere a worker thread
takes items from the queue and processes them. In replying to these
items, it needs to use some random data, and it has to be good random
data. If we simply block until we can have good randomness, then it's
possible for an attacker to fill the queue up with packets waiting to be
processed. Upon realizing the queue is full, WireGuard will detect that
it's under a denial of service attack, and behave accordingly. A better
approach is just to drop incoming handshake packets if the crng is not
yet initialized.
This patch, therefore, makes that information directly accessible.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since commit 9e7002a70e ("char: rtc: remove unused rtc_control() API"),
it is not possible to set a callback anymore, remove its handling from the
interrupt handler.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
distributions that have certain systemd versions in some cases
combined with patches to libcrypt for FIPS/FEDRAMP compliance, have
led to boot-time stalls for some hardware. The reaction by some
distros and Linux sysadmins has been to install packages that try to
do complicated things with the CPU and hope that leads to randomness.
To mitigate this, if RDRAND is available, mix it into entropy provided
by userspace. It won't hurt. and it will probably help.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAltdBIcACgkQ8vlZVpUN
gaMklgf+IuPF7Pn9skIUDtyBRGHL/retaHcfCkabpmsb+zPwS5u+IWS9VGplgMMs
UsYWlUhZLqi2LA8uPNFAu4wl9kbkDiA1SSlALEGb/iGsUDf1ac9ooltX7jI7I3Ms
YOTTTdL/gQ58DwBCyGpwTgGW05tN9hcLKb9RXwXau5MZ2oCaqvllQ3gmjbYteIRH
lBN6bhvc5VGhbmcLleDXrPVjxtS9bMV6Z4F6+2b2Ka7nxExwT/WyAyAD6gsJ3xqj
77c+YniAbg4LYEHoGUVqi+IsSIzmUVbhsqn5JVtoto9eJrasaWxVynWZVkYVZ2fy
WwBRA9v042x7vyowGl5Vf7K0jviBjQ==
=3Lu2
-----END PGP SIGNATURE-----
Merge tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random
Pull random fixes from Ted Ts'o:
"In reaction to the fixes to address CVE-2018-1108, some Linux
distributions that have certain systemd versions in some cases
combined with patches to libcrypt for FIPS/FEDRAMP compliance, have
led to boot-time stalls for some hardware.
The reaction by some distros and Linux sysadmins has been to install
packages that try to do complicated things with the CPU and hope that
leads to randomness.
To mitigate this, if RDRAND is available, mix it into entropy provided
by userspace. It won't hurt, and it will probably help"
* tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
random: mix rdrand with entropy sent in from userspace
As TPM_TRANSMIT_RAW always requires also not to take locks for obvious
reasons (deadlock), this commit renames the flag as TPM_TRANSMIT_NESTED
and prevents taking tpm_mutex when the flag is given to tpm_transmit().
Suggested-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Convert tpm_find_get_ops() to use tpm_default_chip() in case no chip
is passed in.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Implement tpm_default_chip() to find the first TPM chip and return it to
the caller while increasing the reference count on its device. This
function can be used by other subsystems, such as IMA, to find the system's
default TPM chip and use it for all subsequent TPM operations.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Rename tpm_chip_find_get() to tpm_find_get_ops() to more closely match
the tpm_put_ops() counter part.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Adds plumbing required for drivers based on tpm_tis to set hwrng quality.
Signed-off-by: Louis Collard <louiscollard@chromium.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The userpace expects to read the number of bytes stated in the header.
Returning the size of the buffer instead would be unexpected.
Cc: stable@vger.kernel.org
Fixes: 095531f891 ("tpm: return a TPM_RC_COMMAND_CODE response if command is not implemented")
Signed-off-by: Ricardo Schwarzmeier <Ricardo.Schwarzmeier@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Fix tpm ptt initialization error:
tpm tpm0: A TPM error (378) occurred get tpm pcr allocation.
We cannot use go_idle cmd_ready commands via runtime_pm handles
as with the introduction of localities this is no longer an optional
feature, while runtime pm can be not enabled.
Though cmd_ready/go_idle provides a power saving, it's also a part of
TPM2 protocol and should be called explicitly.
This patch exposes cmd_read/go_idle via tpm class ops and removes
runtime pm support as it is not used by any driver.
When calling from nested context always use both flags:
TPM_TRANSMIT_UNLOCKED and TPM_TRANSMIT_RAW. Both are needed to resolve
tpm spaces and locality request recursive calls to tpm_transmit().
TPM_TRANSMIT_RAW should never be used standalone as it will fail
on double locking. While TPM_TRANSMIT_UNLOCKED standalone should be
called from non-recursive locked contexts.
New wrappers are added tpm_cmd_ready() and tpm_go_idle() to
streamline tpm_try_transmit code.
tpm_crb no longer needs own power saving functions and can drop using
tpm_pm_suspend/resume.
This patch cannot be really separated from the locality fix.
Fixes: 888d867df4 (tpm: cmd_ready command can be issued only after granting locality)
Cc: stable@vger.kernel.org
Fixes: 888d867df4 (tpm: cmd_ready command can be issued only after granting locality)
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Locking the root adapter for __i2c_transfer will deadlock if the
device sits behind a mux-locked I2C mux. Switch to the finer-grained
i2c_lock_bus with the I2C_LOCK_SEGMENT flag. If the device does not
sit behind a mux-locked mux, the two locking variants are equivalent.
Signed-off-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
An SPI TPM device managed directly on an embedded board using
the SPI bus and some GPIO or similar line as IRQ handler will
pass the IRQn from the TPM device associated with the SPI
device. This is already handled by the SPI core, so make sure
to pass this down to the core as well.
(The TPM core habit of using -1 to signal no IRQ is dubious
(as IRQ 0 is NO_IRQ) but I do not want to mess with that
semantic in this patch.)
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
In order to make struct tpm_buf the first class object for constructing
TPM commands, migrate tpm2_get_random() to use it. In addition, removed
remaining references to struct tpm2_cmd. All of them use it to acquire
the length of the response, which can be achieved by using
tpm_buf_length().
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Nayna Jain<nayna@linux.vnet.ibm.com>
In order to make struct tpm_buf the first class object for constructing TPM
commands, migrate tpm2_get_tpm_pt() to use it.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Nayna Jain <nayna@linux.vnet.ibm.com>
Tested-by: Nayna Jain <nayna@linux.vnet.ibm.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
In order to make struct tpm_buf the first class object for constructing TPM
commands, migrate tpm2_probe() to use it.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Acked-by: Jay Freyensee <why2jjj.linux@gmail.com>
Reviewed-by: Nayna Jain <nayna@linux.vnet.ibm.com>
Tested-by: Nayna Jain <nayna@linux.vnet.ibm.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
In order to make struct tpm_buf the first class object for constructing TPM
commands, migrated tpm2_shutdown() to use it.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Nayna Jain <nayna@linux.vnet.ibm.com>
Tested-by: Nayna Jain <nayna@linux.vnet.ibm.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
This driver is for a psedo-rng so should not be added in hwrng.
Remove it so that it's replacement can be added.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
No need to keep preemption disabled across the whole function.
mix_pool_bytes() uses a spin_lock() to protect the pool and there are
other places like write_pool() whhich invoke mix_pool_bytes() without
disabling preemption.
credit_entropy_bits() is invoked from other places like
add_hwgenerator_randomness() without disabling preemption.
Before commit 95b709b6be ("random: drop trickle mode") the function
used __this_cpu_inc_return() which would require disabled preemption.
The preempt_disable() section was added in commit 43d5d3018c37 ("[PATCH]
random driver preempt robustness", history tree). It was claimed that
the code relied on "vt_ioctl() being called under BKL".
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[bigeasy: enhance the commit message]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This gives the user building their own kernel (or a Linux
distribution) the option of deciding whether or not to trust the CPU's
hardware random number generator (e.g., RDRAND for x86 CPU's) as being
correctly implemented and not having a back door introduced (perhaps
courtesy of a Nation State's law enforcement or intelligence
agencies).
This will prevent getrandom(2) from blocking, if there is a
willingness to trust the CPU manufacturer.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently the function get_random_bytes_arch() has return value 'void'.
If the hw RNG fails we currently fall back to using get_random_bytes().
This defeats the purpose of requesting random material from the hw RNG
in the first place.
There are currently no intree users of get_random_bytes_arch().
Only get random bytes from the hw RNG, make function return the number
of bytes retrieved from the hw RNG.
Acked-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There are a couple of whitespace issues around the function
get_random_bytes_arch(). In preparation for patching this function
let's clean them up.
Acked-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fedora has integrated the jitter entropy daemon to work around slow
boot problems, especially on VM's that don't support virtio-rng:
https://bugzilla.redhat.com/show_bug.cgi?id=1572944
It's understandable why they did this, but the Jitter entropy daemon
works fundamentally on the principle: "the CPU microarchitecture is
**so** complicated and we can't figure it out, so it *must* be
random". Yes, it uses statistical tests to "prove" it is secure, but
AES_ENCRYPT(NSA_KEY, COUNTER++) will also pass statistical tests with
flying colors.
So if RDRAND is available, mix it into entropy submitted from
userspace. It can't hurt, and if you believe the NSA has backdoored
RDRAND, then they probably have enough details about the Intel
microarchitecture that they can reverse engineer how the Jitter
entropy daemon affects the microarchitecture, and attack its output
stream. And if RDRAND is in fact an honest DRNG, it will immeasurably
improve on what the Jitter entropy daemon might produce.
This also provides some protection against someone who is able to read
or set the entropy seed file.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
Simplifies the code and is more conventional to what's used in the rest
of the kernel for debugfs ops.
Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
Reviewed-by: Amit Shah <amit@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cast *tmp* and *nb_base* to u64 in order to give the compiler
complete information about the proper arithmetic to use.
Notice that such variables are used in contexts that expect
expressions of type u64 (64 bits, unsigned) and the following
expressions are currently being evaluated using 32-bit arithmetic:
tmp << 25
nb_base << 25
Addresses-Coverity-ID: 200586 ("Unintentional integer overflow")
Addresses-Coverity-ID: 200587 ("Unintentional integer overflow")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Use new return type vm_fault_t for fault handler. For now,
this is just documenting that the function returns a
VM_FAULT value rather than an errno. Once all instances are
converted, vm_fault_t will become a distinct type.
Ref-> commit 1c8f422059 ("mm: change return type to
vm_fault_t") was added in 4.17-rc1 to introduce the new
typedef vm_fault_t. Currently we are making change to all
drivers to return vm_fault_t for page fault handlers. As
part of that char/agp driver is also getting changed to
return vm_fault_t type from fault handler.
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
an interrupt issue, and one oops fix if init fails in a certain
way on the client driver.
-corey
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJbP9SSAAoJEGHzjJCRm/+BSPIP/3R9/zKTfv11OIHWCWaKtZzc
bb+W5IRddVSNiFHtCJPNuk09ZSRL5q60fNOtYiQvjVWhykzZPqd3ExqkQxFkyIKj
cirN5iJvE/h28nxL/XOrzErqAFzFqJNY8fG32GeoWlwM4ahDz6vTjQOPwi0PKCbx
xyiCqxquuFBtW1qgBcGKVxJAMd9w29UGOEY5q7ifzsNIVHk/jABDKdWrpGKWzxHk
daRRv4lXFyYoKpXk+MDuVZItQMsVwX+91jWOHDCUPohBFYLXcMCf/XSaAlQg84UG
ugYxT5T04r5WwPzg1WPnq/tYQDtUy4RziVG3CGkFVcTzoOdZpOg+CCRbUdcBWesQ
PesXOtkRVua7Ccov3eNuCQND1SzqYvQDC2ynoMuC8FImaJ1E7rwuPvb9qGYmUKwt
M29kfXYIB4WSqMo1DA+Ivf/THnHmaPQGP5mr1sq4xsirtJu1YJrV+ScQXPqO7139
Kou/mTV6VxwbT+VFID5+sno8ao89g+NG+GgGwYLaBGmUPAuW8wA+OZ9jSTaVWCOb
tFg8J4AttQ9QVcohXBGV8MClSWUdKtH3L/9x593PR3gT0uiRBmYXAMnFkcLQU8iH
s/6evtJF8ykMTapiSQCDh8RLDogieHYQVgjSPvYC0KekpK88EysF4zT0mdoc/qOT
fZYqzB5VJrOVh0ZEok33
=lLfC
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.18-2' of git://github.com/cminyard/linux-ipmi
Pull IPMI fixes from Corey Minyard:
"A couple of small fixes: one to the BMC side of things that fixes an
interrupt issue, and one oops fix if init fails in a certain way on
the client driver"
* tag 'for-linus-4.18-2' of git://github.com/cminyard/linux-ipmi:
ipmi: kcs_bmc: fix IRQ exception if the channel is not open
ipmi: Cleanup oops on initialization failure
At over 4000 #includes, <linux/platform_device.h> is the 9th most
#included header file in the Linux kernel. It does not need
<linux/mod_devicetable.h>, so drop that header and explicitly add
<linux/mod_devicetable.h> to source files that need it.
4146 #include <linux/platform_device.h>
After this patch, there are 225 files that use <linux/mod_devicetable.h>,
for a reduction of around 3900 times that <linux/mod_devicetable.h>
does not have to be read & parsed.
225 #include <linux/mod_devicetable.h>
This patch was build-tested on 20 different arch-es.
It also makes these drivers SubmitChecklist#1 compliant.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kbuild test robot <lkp@intel.com> # drivers/media/platform/vimc/
Reported-by: kbuild test robot <lkp@intel.com> # drivers/pinctrl/pinctrl-u300.c
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pointer dev is being assigned but is never used hence it is redundant
and can be removed.
Cleans up clang warning:
warning: variable ‘dev’ set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pointer hpet is being assigned but is never used hence it is redundant
and can be removed.
Cleans up clang warning:
warning: variable 'hpet' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The poll() changes were not well thought out, and completely
unexplained. They also caused a huge performance regression, because
"->poll()" was no longer a trivial file operation that just called down
to the underlying file operations, but instead did at least two indirect
calls.
Indirect calls are sadly slow now with the Spectre mitigation, but the
performance problem could at least be largely mitigated by changing the
"->get_poll_head()" operation to just have a per-file-descriptor pointer
to the poll head instead. That gets rid of one of the new indirections.
But that doesn't fix the new complexity that is completely unwarranted
for the regular case. The (undocumented) reason for the poll() changes
was some alleged AIO poll race fixing, but we don't make the common case
slower and more complex for some uncommon special case, so this all
really needs way more explanations and most likely a fundamental
redesign.
[ This revert is a revert of about 30 different commits, not reverted
individually because that would just be unnecessarily messy - Linus ]
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When kcs_bmc_handle_event calls kcs_force_abort function to handle the
not open (no user running) KCS channel transaction, the returned status
value -ENODEV causes the low level IRQ handler indicating that the irq
was not for him by returning IRQ_NONE. After some time, this IRQ will
be treated to be spurious one, and the exception dump happens.
irq 30: nobody cared (try booting with the "irqpoll" option)
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.10.15-npcm750 #1
Hardware name: NPCMX50 Chip family
[<c010b264>] (unwind_backtrace) from [<c0106930>] (show_stack+0x20/0x24)
[<c0106930>] (show_stack) from [<c03dad38>] (dump_stack+0x8c/0xa0)
[<c03dad38>] (dump_stack) from [<c0168810>] (__report_bad_irq+0x3c/0xdc)
[<c0168810>] (__report_bad_irq) from [<c0168c34>] (note_interrupt+0x29c/0x2ec)
[<c0168c34>] (note_interrupt) from [<c0165c80>] (handle_irq_event_percpu+0x5c/0x68)
[<c0165c80>] (handle_irq_event_percpu) from [<c0165cd4>] (handle_irq_event+0x48/0x6c)
[<c0165cd4>] (handle_irq_event) from [<c0169664>] (handle_fasteoi_irq+0xc8/0x198)
[<c0169664>] (handle_fasteoi_irq) from [<c016529c>] (__handle_domain_irq+0x90/0xe8)
[<c016529c>] (__handle_domain_irq) from [<c01014bc>] (gic_handle_irq+0x58/0x9c)
[<c01014bc>] (gic_handle_irq) from [<c010752c>] (__irq_svc+0x6c/0x90)
Exception stack(0xc0a01de8 to 0xc0a01e30)
1de0: 00002080 c0a6fbc0 00000000 00000000 00000000 c096d294
1e00: 00000000 00000001 dc406400 f03ff100 00000082 c0a01e94 c0a6fbc0 c0a01e38
1e20: 00200102 c01015bc 60000113 ffffffff
[<c010752c>] (__irq_svc) from [<c01015bc>] (__do_softirq+0xbc/0x358)
[<c01015bc>] (__do_softirq) from [<c011c798>] (irq_exit+0xb8/0xec)
[<c011c798>] (irq_exit) from [<c01652a0>] (__handle_domain_irq+0x94/0xe8)
[<c01652a0>] (__handle_domain_irq) from [<c01014bc>] (gic_handle_irq+0x58/0x9c)
[<c01014bc>] (gic_handle_irq) from [<c010752c>] (__irq_svc+0x6c/0x90)
Exception stack(0xc0a01ef8 to 0xc0a01f40)
1ee0: 00000000 000003ae
1f00: dcc0f338 c0111060 c0a00000 c0a0cc44 c0a0cbe4 c0a1c22b c07bc218 00000001
1f20: dcffca40 c0a01f54 c0a01f58 c0a01f48 c0103524 c0103528 60000013 ffffffff
[<c010752c>] (__irq_svc) from [<c0103528>] (arch_cpu_idle+0x48/0x4c)
[<c0103528>] (arch_cpu_idle) from [<c0681390>] (default_idle_call+0x30/0x3c)
[<c0681390>] (default_idle_call) from [<c0156f24>] (do_idle+0xc8/0x134)
[<c0156f24>] (do_idle) from [<c015722c>] (cpu_startup_entry+0x28/0x2c)
[<c015722c>] (cpu_startup_entry) from [<c067ad74>] (rest_init+0x84/0x88)
[<c067ad74>] (rest_init) from [<c0900d44>] (start_kernel+0x388/0x394)
[<c0900d44>] (start_kernel) from [<0000807c>] (0x807c)
handlers:
[<c041c5dc>] npcm7xx_kcs_irq
Disabling IRQ #30
It needs to change the returned status from -ENODEV to 0. The -ENODEV
was originally used to tell the low level IRQ handler that no user was
running, but not consider the IRQ handling desgin.
And multiple KCS channels share one IRQ handler, it needs to check the
IBF flag before doing force abort. If the IBF is set, after handling,
return 0 to low level IRQ handler to indicate that the IRQ is handled.
Signed-off-by: Haiyue Wang <haiyue.wang@linux.intel.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Commit 93c303d204 "ipmi_si: Clean up shutdown a bit" didn't
copy the behavior of the cleanup in one spot, it needed to
check for a non-NULL interface before cleaning it up.
Reported-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Meelis Roos <mroos@linux.ee>
Pull crypto fixes from Herbert Xu:
- Fix use after free in chtls
- Fix RBP breakage in sha3
- Fix use after free in hwrng_unregister
- Fix overread in morus640
- Move sleep out of kernel_neon in arm64/aes-blk
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
hwrng: core - Always drop the RNG in hwrng_unregister()
crypto: morus640 - Fix out-of-bounds access
crypto: don't optimize keccakf()
crypto: arm64/aes-blk - fix and move skcipher_walk_done out of kernel_neon_begin, _end
crypto: chtls - use after free in chtls_pt_recvmsg()
As we move stuff around, some doc references are broken. Fix some of
them via this script:
./scripts/documentation-file-ref-check --fix
Manually checked if the produced result is valid, removing a few
false-positives.
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
enable_best_rng() is used in hwrng_unregister() to switch away from the
currently active RNG, if that is the one currently being removed.
However enable_best_rng() might fail, if the next RNG's init routine
fails. In that case enable_best_rng() will return an error code and
the currently active RNG will remain active.
After unregistering this might lead to crashes due to use-after-free.
Fix this by dropping the currently active RNG, if enable_best_rng()
failed. This will result in no RNG to be active, if the next-best
one failed to initialize.
This problem was introduced by 142a27f0a7
Fixes: 142a27f0a7 ("hwrng: core - Reset user selected rng by...")
Reported-by: Wirz <spam@lukas-wirz.de>
Tested-by: Wirz <spam@lukas-wirz.de>
Signed-off-by: Michael Büsch <m@bues.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>