[ Upstream commit 56c7c6eaf3 ]
Attempting to migrate the PMU context after we've unregistered the PMU
device, or especially if we never successfully registered it in the
first place, is a woefully bad idea. It's also fundamentally pointless
anyway. Make sure to unregister an instance from the hotplug handler
*without* invoking the teardown callback.
Fixes: 0ba64770a2 ("perf: Add Arm CMN-600 PMU driver")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/2c221d745544774e4b07583b65b5d4d94f7e0fe4.1638530442.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Russell reported that since 5.13, KVM's probing of the PMU has
started to fail on his HW. As it turns out, there is an implicit
ordering dependency between the architectural PMU probing code and
and KVM's own probing. If, due to probe ordering reasons, KVM probes
before the PMU driver, it will fail to detect the PMU and prevent it
from being advertised to guests as well as the VMM.
Obviously, this is one probing too many, and we should be able to
deal with any ordering.
Add a callback from the PMU code into KVM to advertise the registration
of a host CPU PMU, allowing for any probing order.
Fixes: 5421db1be3 ("KVM: arm64: Divorce the perf code from oprofile helpers")
Reported-by: "Russell King (Oracle)" <linux@armlinux.org.uk>
Tested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/YUYRKVflRtUytzy5@shell.armlinux.org.uk
Cc: stable@vger.kernel.org
ddr_perf_probe() misses to call ida_simple_remove() in an error path.
Jump to cpuhp_state_err to fix it.
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Link: https://lore.kernel.org/r/20210617122614.166823-1-jingxiangfeng@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
When multiple dtcs share the same IRQ number, the irq_friend which
used to refer to dtc object gets calculated incorrect which leads
to invalid pointer.
Fixes: 0ba64770a2 ("perf: Add Arm CMN-600 PMU driver")
Signed-off-by: Tuan Phan <tuanphan@os.amperecomputing.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/1623946129-3290-1-git-send-email-tuanphan@os.amperecomputing.com
Signed-off-by: Will Deacon <will@kernel.org>
Use common macro PMU_EVENT_ATTR_ID to simplify IMX8_DDR_PMU_EVENT_ATTR
Reviewed by Frank Li <Frank .li@nxp.com>
Cc: Frank Li <Frank.li@nxp.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Link: https://lore.kernel.org/r/1623220863-58233-7-git-send-email-liuqi115@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Use common macro PMU_EVENT_ATTR_ID to simplify XGENE_PMU_EVENT_ATTR
Cc: Khuong Dinh <khuong@os.amperecomputing.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Link: https://lore.kernel.org/r/1623220863-58233-6-git-send-email-liuqi115@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Use common macro PMU_EVENT_ATTR_ID to simplify L3CACHE_EVENT_ATTR
Cc: Andy Gross <agross@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Link: https://lore.kernel.org/r/1623220863-58233-5-git-send-email-liuqi115@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Use common macro PMU_EVENT_ATTR_ID to simplify L2CACHE_EVENT_ATTR
Cc: Andy Gross <agross@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Link: https://lore.kernel.org/r/1623220863-58233-4-git-send-email-liuqi115@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
With global filtering, we only allow an event to be scheduled if its
filter settings exactly match those of any existing events, therefore
it is pointless to reapply the filter in that case. Much worse, though,
is that in doing that we trample the event type of counter 0 if it's
already active, and never touch the appropriate PMEVTYPERn so the new
event is likely not counting the right thing either. Don't do that.
CC: stable@vger.kernel.org
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/32c80c0e46237f49ad8da0c9f8864e13c4a803aa.1623153312.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
These are only put in an array of pointers to const attribute_group
structs. Make them const like the other static attribute_group structs
to allow the compiler to put them in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20210605221514.73449-1-rikard.falkeborn@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com>
Link: https://lore.kernel.org/r/20210608084816.1046485-1-chenxiaosong2@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
'Data source' is a new function for HHA PMU and config / clear
interface was wrong by mistake. 'HHA_DATSRC_CTRL' register is
mainly used for data source configuration, if we enable bit0
as driver, it will go on count the event and we didn't check
it carefully. So fix the issue and do as the initial purpose.
Fixes: 932f6a99f9 ("drivers/perf: hisi: Add new functions for HHA PMU")
Reported-by: kernel test robot <lkp@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Link: https://lore.kernel.org/r/1622709291-37996-1-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
request_irq() after setting IRQ_NOAUTOEN as below
irq_set_status_flags(irq, IRQ_NOAUTOEN); request_irq(dev, irq...); can
be replaced by request_irq() with IRQF_NO_AUTOEN flag.
this patch is made base on "add IRQF_NO_AUTOEN for request_irq" which
is being merged: https://lore.kernel.org/patchwork/patch/1388765/
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/1622595642-61678-3-git-send-email-tiantao6@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
request_irq() after setting IRQ_NOAUTOEN as below
irq_set_status_flags(irq, IRQ_NOAUTOEN);
request_irq(dev, irq...);
can be replaced by request_irq() with IRQF_NO_AUTOEN flag.
this patch is made base on "add IRQF_NO_AUTOEN for request_irq" which
is being merged: https://lore.kernel.org/patchwork/patch/1388765/
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/1622595642-61678-2-git-send-email-tiantao6@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
Use DEVICE_ATTR_RO() helper instead of plain DEVICE_ATTR(),
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20210528061738.23392-1-yuehaibing@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Use DEVICE_ATTR_RO() helper instead of plain DEVICE_ATTR(),
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20210528014940.4184-1-yuehaibing@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Use DEVICE_ATTR_RO() helper instead of plain DEVICE_ATTR(),
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20210528014749.24068-1-yuehaibing@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Use DEVICE_ATTR_RO helper instead of plain DEVICE_ATTR,
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20210528014130.7708-1-yuehaibing@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Fix some coding style issues reported by checkpatch.pl, including
following types:
ERROR: need consistent spacing around '-' (ctx:WxV)
ERROR: space required before the open parenthesis '('
Signed-off-by: Junhao He <hejunhao2@hisilicon.com>
Signed-off-by: Jay Fang <f.fangjian@huawei.com>
Link: https://lore.kernel.org/r/1620736054-58412-5-git-send-email-f.fangjian@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Fix some coding style issues reported by checkpatch.pl, including
following types:
ERROR: spaces required around that '=' (ctx:VxW)
WARNING: Possible unnecessary 'out of memory' message
Signed-off-by: Junhao He <hejunhao2@hisilicon.com>
Signed-off-by: Jay Fang <f.fangjian@huawei.com>
Link: https://lore.kernel.org/r/1620736054-58412-3-git-send-email-f.fangjian@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Fix some coding style issues reported by checkpatch.pl, including
following types:
WARNING: void function return statements are not generally useful
WARNING: Possible unnecessary 'out of memory' message
Signed-off-by: Junhao He <hejunhao2@hisilicon.com>
Signed-off-by: Jay Fang <f.fangjian@huawei.com>
Link: https://lore.kernel.org/r/1620736054-58412-2-git-send-email-f.fangjian@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Link: https://lore.kernel.org/r/1620715364-107460-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
These drivers use irq_set_affinity_hint() to set the affinity for the PMU
interrupts, which relies on the undocumented side effect that this function
actually sets the affinity under the hood.
Setting an hint is clearly not a guarantee and for these PMU interrupts an
affinity hint, which is supposed to guide userspace for setting affinity,
is beyond pointless, because the affinity of these interrupts cannot be
modified from user space.
Aside of that the error checks are bogus because the only error which is
returned from irq_set_affinity_hint() is when there is no irq descriptor
for the interrupt number, but not when the affinity set fails. That's on
purpose because the hint can point to an offline CPU.
Replace the mindless abuse with irq_set_affinity().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210518093118.813375875@linutronix.de
Signed-off-by: Will Deacon <will@kernel.org>
The driver uses irq_set_affinity_hint() to set the affinity for the PMU
interrupts, which relies on the undocumented side effect that this function
actually sets the affinity under the hood.
Setting an hint is clearly not a guarantee and for these PMU interrupts an
affinity hint, which is supposed to guide userspace for setting affinity,
is beyond pointless, because the affinity of these interrupts cannot be
modified from user space.
Aside of that the error checks are bogus because the only error which is
returned from irq_set_affinity_hint() is when there is no irq descriptor
for the interrupt number, but not when the affinity set fails. That's on
purpose because the hint can point to an offline CPU.
Replace the mindless abuse with irq_set_affinity().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Frank Li <Frank.li@nxp.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210518093118.699566062@linutronix.de
Signed-off-by: Will Deacon <will@kernel.org>
The driver uses irq_set_affinity_hint() to set the affinity for the PMU
interrupts, which relies on the undocumented side effect that this function
actually sets the affinity under the hood.
Setting an hint is clearly not a guarantee and for these PMU interrupts an
affinity hint, which is supposed to guide userspace for setting affinity,
is beyond pointless, because the affinity of these interrupts cannot be
modified from user space.
Aside of that the error checks are bogus because the only error which is
returned from irq_set_affinity_hint() is when there is no irq descriptor
for the interrupt number, but not when the affinity set fails. That's on
purpose because the hint can point to an offline CPU.
Replace the mindless abuse with irq_set_affinity().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210518093118.603636289@linutronix.de
Signed-off-by: Will Deacon <will@kernel.org>
The driver uses irq_set_affinity_hint() to set the affinity for the PMU
interrupts, which relies on the undocumented side effect that this function
actually sets the affinity under the hood.
Setting an hint is clearly not a guarantee and for these PMU interrupts an
affinity hint, which is supposed to guide userspace for setting affinity,
is beyond pointless, because the affinity of these interrupts cannot be
modified from user space.
Aside of that the error checks are bogus because the only error which is
returned from irq_set_affinity_hint() is when there is no irq descriptor
for the interrupt number, but not when the affinity set fails. That's on
purpose because the hint can point to an offline CPU.
Replace the mindless abuse with irq_set_affinity().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210518093118.505110632@linutronix.de
Signed-off-by: Will Deacon <will@kernel.org>
The driver uses irq_set_affinity_hint() to set the affinity for the PMU
interrupts, which relies on the undocumented side effect that this function
actually sets the affinity under the hood.
Setting an hint is clearly not a guarantee and for these PMU interrupts an
affinity hint, which is supposed to guide userspace for setting affinity,
is beyond pointless, because the affinity of these interrupts cannot be
modified from user space.
Aside of that the error checks are bogus because the only error which is
returned from irq_set_affinity_hint() is when there is no irq descriptor
for the interrupt number, but not when the affinity set fails. That's on
purpose because the hint can point to an offline CPU.
Replace the mindless abuse with irq_set_affinity().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210518093118.395086573@linutronix.de
Signed-off-by: Will Deacon <will@kernel.org>
The driver uses irq_set_affinity_hint() to set the affinity for the PMU
interrupts, which relies on the undocumented side effect that this function
actually sets the affinity under the hood.
Setting an hint is clearly not a guarantee and for these PMU interrupts an
affinity hint, which is supposed to guide userspace for setting affinity,
is beyond pointless, because the affinity of these interrupts cannot be
modified from user space.
Aside of that the error checks are bogus because the only error which is
returned from irq_set_affinity_hint() is when there is no irq descriptor
for the interrupt number, but not when the affinity set fails. That's on
purpose because the hint can point to an offline CPU.
Replace the mindless abuse with irq_set_affinity().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210518093118.277228577@linutronix.de
Signed-off-by: Will Deacon <will@kernel.org>
The driver uses irq_set_affinity_hint() to set the affinity for the PMU
interrupts, which relies on the undocumented side effect that this function
actually sets the affinity under the hood.
Setting an hint is clearly not a guarantee and for these PMU interrupts an
affinity hint, which is supposed to guide userspace for setting affinity,
is beyond pointless, because the affinity of these interrupts cannot be
modified from user space.
Aside of that the error checks are bogus because the only error which is
returned from irq_set_affinity_hint() is when there is no irq descriptor
for the interrupt number, but not when the affinity set fails. That's on
purpose because the hint can point to an offline CPU.
Replace the mindless abuse with irq_set_affinity().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210518093118.128250213@linutronix.de
Signed-off-by: Will Deacon <will@kernel.org>
- Stage-2 isolation for the host kernel when running in protected mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
x86:
- Optimizations and cleanup of nested SVM code
- AMD: Support for virtual SPEC_CTRL
- Optimizations of the new MMU code: fast invalidation,
zap under read lock, enable/disably dirty page logging under
read lock
- /dev/kvm API for AMD SEV live migration (guest API coming soon)
- support SEV virtual machines sharing the same encryption context
- support SGX in virtual machines
- add a few more statistics
- improved directed yield heuristics
- Lots and lots of cleanups
Generic:
- Rework of MMU notifier interface, simplifying and optimizing
the architecture-specific code
- Some selftests improvements
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmCJ13kUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroM1HAgAqzPxEtiTPTFeFJV5cnPPJ3dFoFDK
y/juZJUQ1AOtvuWzzwuf175ewkv9vfmtG6rVohpNSkUlJYeoc6tw7n8BTTzCVC1b
c/4Dnrjeycr6cskYlzaPyV6MSgjSv5gfyj1LA5UEM16LDyekmaynosVWY5wJhju+
Bnyid8l8Utgz+TLLYogfQJQECCrsU0Wm//n+8TWQgLf1uuiwshU5JJe7b43diJrY
+2DX+8p9yWXCTz62sCeDWNahUv8AbXpMeJ8uqZPYcN1P0gSEUGu8xKmLOFf9kR7b
M4U1Gyz8QQbjd2lqnwiWIkvRLX6gyGVbq2zH0QbhUe5gg3qGUX7JjrhdDQ==
=AXUi
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"This is a large update by KVM standards, including AMD PSP (Platform
Security Processor, aka "AMD Secure Technology") and ARM CoreSight
(debug and trace) changes.
ARM:
- CoreSight: Add support for ETE and TRBE
- Stage-2 isolation for the host kernel when running in protected
mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
x86:
- AMD PSP driver changes
- Optimizations and cleanup of nested SVM code
- AMD: Support for virtual SPEC_CTRL
- Optimizations of the new MMU code: fast invalidation, zap under
read lock, enable/disably dirty page logging under read lock
- /dev/kvm API for AMD SEV live migration (guest API coming soon)
- support SEV virtual machines sharing the same encryption context
- support SGX in virtual machines
- add a few more statistics
- improved directed yield heuristics
- Lots and lots of cleanups
Generic:
- Rework of MMU notifier interface, simplifying and optimizing the
architecture-specific code
- a handful of "Get rid of oprofile leftovers" patches
- Some selftests improvements"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (379 commits)
KVM: selftests: Speed up set_memory_region_test
selftests: kvm: Fix the check of return value
KVM: x86: Take advantage of kvm_arch_dy_has_pending_interrupt()
KVM: SVM: Skip SEV cache flush if no ASIDs have been used
KVM: SVM: Remove an unnecessary prototype declaration of sev_flush_asids()
KVM: SVM: Drop redundant svm_sev_enabled() helper
KVM: SVM: Move SEV VMCB tracking allocation to sev.c
KVM: SVM: Explicitly check max SEV ASID during sev_hardware_setup()
KVM: SVM: Unconditionally invoke sev_hardware_teardown()
KVM: SVM: Enable SEV/SEV-ES functionality by default (when supported)
KVM: SVM: Condition sev_enabled and sev_es_enabled on CONFIG_KVM_AMD_SEV=y
KVM: SVM: Append "_enabled" to module-scoped SEV/SEV-ES control variables
KVM: SEV: Mask CPUID[0x8000001F].eax according to supported features
KVM: SVM: Move SEV module params/variables to sev.c
KVM: SVM: Disable SEV/SEV-ES if NPT is disabled
KVM: SVM: Free sev_asid_bitmap during init if SEV setup fails
KVM: SVM: Zero out the VMCB array used to track SEV ASID association
x86/sev: Drop redundant and potentially misleading 'sev_enabled'
KVM: x86: Move reverse CPUID helpers to separate header file
KVM: x86: Rename GPR accessors to make mode-aware variants the defaults
...
Nearly all of the messages we can log from the platform device code
relate to the specific PMU device and the properties we're parsing from
its DT node. In some cases we use %pOF to point at where something was
wrong, but even that is inconsistent. Let's convert these logs to the
appropriate dev_printk variants, so that every issue specific to the
device and/or its DT description is clearly and instantly attributable,
particularly if there is more than one PMU node present in the DT.
The local refactoring in a couple of functions invites some extra
cleanup in the process - the init_fn matching can be streamlined, and
the PMU registration failure message moved to the appropriate place and
log level.
CC: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/10a4aacdf071d0c03d061c408a5899e5b32cc0a6.1616774562.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
By virtue of using platform_irq_get_optional() under the covers,
platform_irq_count() needs the target interrupt controller to be
available and may return -EPROBE_DEFER if it isn't. Let's use
dev_err_probe() to avoid a spurious error log (and help debug any
deferral issues) in that case.
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/073d5e0d3ed1f040592cb47ca6fe3759f40cc7d1.1616774562.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
On HiSilicon Hip09 platform, there is a PA (Protocol Adapter) module on
each chip SICL (Super I/O Cluster) which incorporates three Hydra interface
and facilitates the cache coherency between the dies on the chip. While PA
uncore PMU model is the same as other Hip09 PMU modules and many PMU events
are supported. Let's support the PMU driver using the HiSilicon uncore PMU
framework.
PA PMU supports the following filter functions:
* tracetag_en: allows user to count events according to tt_req or
tt_core set in L3C PMU. It's the same as other PMUs.
* srcid_cmd & srcid_msk: allows user to filter statistics that come from
specific CCL/ICL by configuration source ID.
* tgtid_cmd & tgtid_msk: it is the similar function to srcid_cmd &
srcid_msk. Both are used to check where the data comes from or go to.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Co-developed-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Link: https://lore.kernel.org/r/1615186237-22263-9-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
HiSilicon's Hip09 is comprised by multi-dies that can be connected by SLLC
module (Skyros Link Layer Controller), its has separate PMU registers which
the driver can program it freely and interrupt is supported to handle
counter overflow. Let's support its driver under the framework of HiSilicon
uncore PMU driver.
SLLC PMU supports the following filter functions:
* tracetag_en: allows user to count data according to tt_req or
tt_core set in L3C PMU.
* srcid_cmd & srcid_msk: allows user to filter statistics that come from
specific CCL/ICL by configuration source ID.
* tgtid_hi & tgtid_lo: it also supports event statistics that these
operations will go to the CCL/ICL by configuration target ID or
target ID range. It's the same as source ID with 11-bit width in
the SoC. More introduction is added in documentation:
Documentation/admin-guide/perf/hisi-pmu.rst
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Co-developed-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Link: https://lore.kernel.org/r/1615186237-22263-8-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
DDRC PMU's events are useful for performance profiling, but the events
are limited and counter is fixed. On HiSilicon Hip09 platform, PMU
counters are the programmable and more events are supported. Let's
add the DDRC PMU v2 driver.
Bandwidth events are exposed directly in driver and some more events
will listed in JSON file later.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Co-developed-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Link: https://lore.kernel.org/r/1615186237-22263-7-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
On HiSilicon Hip09 platform, some new functions are also supported on
HHA PMU.
* tracetag_en: it is the abbreviation of tracetag enable and allows user
to count events according to tt_req or tt_core set in L3C PMU.
* datasrc_skt: it is the abbreviation of data source from another
socket and it is used in the multi-chips. It's the same as L3C PMU.
* srcid_cmd & srcid_msk: pair of the fields are used to filter
statistics that come from the specific CCL/ICL by the configuration.
These are the abbreviation of source ID command and mask. The source
ID is 11-bit and detailed descriptions are documented in
Documentation/admin-guide/perf/hisi-pmu.rst.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Co-developed-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Link: https://lore.kernel.org/r/1615186237-22263-6-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
On HiSilicon Hip09 platform, some new functions are enhanced on L3C PMU:
* tt_req: it is the abbreviation of tracetag request and allows user to
count only read/write/atomic operations. tt_req is 3-bit and details are
listed in the hisi-pmu document.
$# perf stat -a -e hisi_sccl3_l3c0/config=0x02,tt_req=0x4/ sleep 5
* tt_core: it is the abbreviation of tracetag core and allows user to
filter by core/thread within the cluster, it is a 8-bit bitmap that each
bit represents the corresponding core/thread in this L3C.
$# perf stat -a -e hisi_sccl3_l3c0/config=0x02,tt_core=0xf/ sleep 5
* datasrc_cfg: it is the abbreviation of data source configuration and
allows user to check where the data comes from, such as: from local DDR,
cross-die DDR or cross-socket DDR. Its is 5-bit and represents different
data source in the SoC.
$# perf stat -a -e hisi_sccl3_l3c0/dat_access,datasrc_cfg=0xe/ sleep 5
* datasrc_skt: it is the abbreviation of data source from another socket
and is used in the multi-chips, if user wants to check the cross-socket
datat source, it shall be added in perf command. Only one bit is used to
control this.
$# perf stat -a -e hisi_sccl3_l3c0/dat_access,datasrc_cfg=0x10,datasrc_skt=1/ sleep 5
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Co-developed-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Link: https://lore.kernel.org/r/1615186237-22263-5-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
For HiSilicon uncore PMU, more versions are supported and some variables
shall be added suffix to distinguish the version which are prepared for
the new drivers.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Co-developed-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Link: https://lore.kernel.org/r/1615186237-22263-4-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
On HiSilicon uncore PMU drivers, interrupt handling function and interrupt
registration function are very similar in differents PMU modules. Let's
refactor the frame.
Two new callbacks are added for the HW accessors:
* hisi_uncore_ops::get_int_status returns a bitmap of events which
have overflowed and raised an interrupt
* hisi_uncore_ops::clear_int_status clears the overflow status for a
specific event
These callback functions are used by a common IRQ handler,
hisi_uncore_pmu_isr().
One more function hisi_uncore_pmu_init_irq() is added to replace each
PMU initialization IRQ interface and simplify the code.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Co-developed-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Link: https://lore.kernel.org/r/1615186237-22263-3-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
The sanity check for counter index has been done in the function
hisi_uncore_pmu_get_event_idx, so remove the redundant interface
hisi_uncore_pmu_counter_valid() and sanity check.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Co-developed-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Link: https://lore.kernel.org/r/1615186237-22263-2-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
For each PMU event, there is a SMMU_EVENT_ATTR(xx, XX) and
&smmu_event_attr_xx.attr.attr. Let's redefine the SMMU_EVENT_ATTR
to simplify the smmu_pmu_events.
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Link: https://lore.kernel.org/r/1612789498-12957-1-git-send-email-liuqi115@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
sprintf does not know the PAGE_SIZE maximum of the temporary buffer
used for sysfs content and it's possible to overrun the buffer length.
Use sysfs_emit() function to ensures that no overrun is done.
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Link: https://lore.kernel.org/r/1616148273-16374-4-git-send-email-liuqi115@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Fix the following coccicheck warning:
./drivers/perf/hisilicon/hisi_uncore_pmu.c:128:8-16: WARNING: use scnprintf or sprintf.
./drivers/perf/fsl_imx8_ddr_perf.c:173:8-16: WARNING: use scnprintf or sprintf.
./drivers/perf/arm_spe_pmu.c:129:8-16: WARNING: use scnprintf or sprintf.
./drivers/perf/arm_smmu_pmu.c:563:8-16: WARNING: use scnprintf or sprintf.
./drivers/perf/arm_dsu_pmu.c:149:8-16: WARNING: use scnprintf or sprintf.
./drivers/perf/arm_dsu_pmu.c:139:8-16: WARNING: use scnprintf or sprintf.
./drivers/perf/arm-cmn.c:563:8-16: WARNING: use scnprintf or sprintf.
./drivers/perf/arm-cmn.c:351:8-16: WARNING: use scnprintf or sprintf.
./drivers/perf/arm-ccn.c:224:8-16: WARNING: use scnprintf or sprintf.
./drivers/perf/arm-cci.c:708:8-16: WARNING: use scnprintf or sprintf.
./drivers/perf/arm-cci.c:699:8-16: WARNING: use scnprintf or sprintf.
./drivers/perf/arm-cci.c:528:8-16: WARNING: use scnprintf or sprintf.
./drivers/perf/arm-cci.c:309:8-16: WARNING: use scnprintf or sprintf.
Signed-off-by: Zihao Tang <tangzihao1@hisilicon.com>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Link: https://lore.kernel.org/r/1616148273-16374-2-git-send-email-liuqi115@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Fix to return negative error code -ENOMEM from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: 53c218da22 ("driver/perf: Add PMU driver for the ARM DMC-620 memory controller")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20210312080421.277562-1-weiyongjun1@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Robin Murphy
Marc Zyngier
Jing Xiangfeng
Tuan Phan
Qi Liu
Rikard Falkeborn
ChenXiaoSong
Shaokun Zhang
Tian Tao
YueHaibing
Hao Fang
Junhao He
Zou Wei
Thomas Gleixner
Linus Torvalds
Zihao Tang
Wei Yongjun