Граф коммитов

146 Коммитов

Автор SHA1 Сообщение Дата
KAMEZAWA Hiroyuki 4bfc44958e mm: make set_mempolicy(MPOL_INTERLEAV) N_HIGH_MEMORY aware
At first, init_task's mems_allowed is initialized as this.
 init_task->mems_allowed == node_state[N_POSSIBLE]

And cpuset's top_cpuset mask is initialized as this
 top_cpuset->mems_allowed = node_state[N_HIGH_MEMORY]

Before 2.6.29:
policy's mems_allowed is initialized as this.

  1. update tasks->mems_allowed by its cpuset->mems_allowed.
  2. policy->mems_allowed = nodes_and(tasks->mems_allowed, user's mask)

Updating task's mems_allowed in reference to top_cpuset's one.
cpuset's mems_allowed is aware of N_HIGH_MEMORY, always.

In 2.6.30: After commit 58568d2a82
("cpuset,mm: update tasks' mems_allowed in time"), policy's mems_allowed
is initialized as this.

  1. policy->mems_allowd = nodes_and(task->mems_allowed, user's mask)

Here, if task is in top_cpuset, task->mems_allowed is not updated from
init's one.  Assume user excutes command as #numactrl --interleave=all
,....

  policy->mems_allowd = nodes_and(N_POSSIBLE, ALL_SET_MASK)

Then, policy's mems_allowd can includes a possible node, which has no pgdat.

MPOL's INTERLEAVE just scans nodemask of task->mems_allowd and access this
directly.

  NODE_DATA(nid)->zonelist even if NODE_DATA(nid)==NULL

Then, what's we need is making policy->mems_allowed be aware of
N_HIGH_MEMORY.  This patch does that.  But to do so, extra nodemask will
be on statck.  Because I know cpumask has a new interface of
CPUMASK_ALLOC(), I added it to node.

This patch stands on old behavior.  But I feel this fix itself is just a
Band-Aid.  But to do fundametal fix, we have to take care of memory
hotplug and it takes time.  (task->mems_allowd should be N_HIGH_MEMORY, I
think.)

mpol_set_nodemask() should be aware of N_HIGH_MEMORY and policy's nodemask
should be includes only online nodes.

In old behavior, this is guaranteed by frequent reference to cpuset's
code.  Now, most of them are removed and mempolicy has to check it by
itself.

To do check, a few nodemask_t will be used for calculating nodemask.  But,
size of nodemask_t can be big and it's not good to allocate them on stack.

Now, cpumask_t has CPUMASK_ALLOC/FREE an easy code for get scratch area.
NODEMASK_ALLOC/FREE shoudl be there.

[akpm@linux-foundation.org: cleanups & tweaks]
Tested-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Miao Xie <miaox@cn.fujitsu.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Paul Menage <menage@google.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: David Rientjes <rientjes@google.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-07 10:39:55 -07:00
Mel Gorman 6484eb3e2a page allocator: do not check NUMA node ID when the caller knows the node is valid
Callers of alloc_pages_node() can optionally specify -1 as a node to mean
"allocate from the current node".  However, a number of the callers in
fast paths know for a fact their node is valid.  To avoid a comparison and
branch, this patch adds alloc_pages_exact_node() that only checks the nid
with VM_BUG_ON().  Callers that know their node is valid are then
converted.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Paul Mundt <lethal@linux-sh.org>	[for the SLOB NUMA bits]
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:32 -07:00
Miao Xie 58568d2a82 cpuset,mm: update tasks' mems_allowed in time
Fix allocating page cache/slab object on the unallowed node when memory
spread is set by updating tasks' mems_allowed after its cpuset's mems is
changed.

In order to update tasks' mems_allowed in time, we must modify the code of
memory policy.  Because the memory policy is applied in the process's
context originally.  After applying this patch, one task directly
manipulates anothers mems_allowed, and we use alloc_lock in the
task_struct to protect mems_allowed and memory policy of the task.

But in the fast path, we didn't use lock to protect them, because adding a
lock may lead to performance regression.  But if we don't add a lock,the
task might see no nodes when changing cpuset's mems_allowed to some
non-overlapping set.  In order to avoid it, we set all new allowed nodes,
then clear newly disallowed ones.

[lee.schermerhorn@hp.com:
  The rework of mpol_new() to extract the adjusting of the node mask to
  apply cpuset and mpol flags "context" breaks set_mempolicy() and mbind()
  with MPOL_PREFERRED and a NULL nodemask--i.e., explicit local
  allocation.  Fix this by adding the check for MPOL_PREFERRED and empty
  node mask to mpol_new_mpolicy().

  Remove the now unneeded 'nodes = NULL' from mpol_new().

  Note that mpol_new_mempolicy() is always called with a non-NULL
  'nodes' parameter now that it has been removed from mpol_new().
  Therefore, we don't need to test nodes for NULL before testing it for
  'empty'.  However, just to be extra paranoid, add a VM_BUG_ON() to
  verify this assumption.]
[lee.schermerhorn@hp.com:

  I don't think the function name 'mpol_new_mempolicy' is descriptive
  enough to differentiate it from mpol_new().

  This function applies cpuset set context, usually constraining nodes
  to those allowed by the cpuset.  However, when the 'RELATIVE_NODES flag
  is set, it also translates the nodes.  So I settled on
  'mpol_set_nodemask()', because the comment block for mpol_new() mentions
  that we need to call this function to "set nodes".

  Some additional minor line length, whitespace and typo cleanup.]
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Paul Menage <menage@google.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:31 -07:00
Heiko Carstens 938bb9f5e8 [CVE-2009-0029] System call wrappers part 28
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14 14:15:30 +01:00
James Morris 2b82892565 Merge branch 'master' into next
Conflicts:
	security/keys/internal.h
	security/keys/process_keys.c
	security/keys/request_key.c

Fixed conflicts above by using the non 'tsk' versions.

Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 11:29:12 +11:00
David Howells c69e8d9c01 CRED: Use RCU to access another task's creds and to release a task's own creds
Use RCU to access another task's creds and to release a task's own creds.
This means that it will be possible for the credentials of a task to be
replaced without another task (a) requiring a full lock to read them, and (b)
seeing deallocated memory.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 10:39:19 +11:00
David Howells b6dff3ec5e CRED: Separate task security context from task_struct
Separate the task security context from task_struct.  At this point, the
security data is temporarily embedded in the task_struct with two pointers
pointing to it.

Note that the Alpha arch is altered as it refers to (E)UID and (E)GID in
entry.S via asm-offsets.

With comment fixes Signed-off-by: Marc Dionne <marc.c.dionne@gmail.com>

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 10:39:16 +11:00
David Howells 76aac0e9a1 CRED: Wrap task credential accesses in the core kernel
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.

Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().

Change some task->e?[ug]id to task_e?[ug]id().  In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-audit@redhat.com
Cc: containers@lists.linux-foundation.org
Cc: linux-mm@kvack.org
Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 10:39:12 +11:00
Christoph Lameter 0aedadf91a mm: move migrate_prep out from under mmap_sem
Move the migrate_prep outside the mmap_sem for the following system calls

1. sys_move_pages
2. sys_migrate_pages
3. sys_mbind()

It really does not matter when we flush the lru.  The system is free to
add pages onto the lru even during migration which will make the page
migration either skip the page (mbind, migrate_pages) or return a busy
state (move_pages).

Fixes this lockdep warning (and potential deadlock):

Some VM place has
      mmap_sem -> kevent_wq via lru_add_drain_all()

net/core/dev.c::dev_ioctl()  has
     rtnl_lock  ->  mmap_sem        (*) the ioctl has copy_from_user() and it can do page fault.

linkwatch_event has
     kevent_wq -> rtnl_lock

Signed-off-by: Christoph Lameter <cl@linux-foundation.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-06 15:41:18 -08:00
Lee Schermerhorn 894bc31041 Unevictable LRU Infrastructure
When the system contains lots of mlocked or otherwise unevictable pages,
the pageout code (kswapd) can spend lots of time scanning over these
pages.  Worse still, the presence of lots of unevictable pages can confuse
kswapd into thinking that more aggressive pageout modes are required,
resulting in all kinds of bad behaviour.

Infrastructure to manage pages excluded from reclaim--i.e., hidden from
vmscan.  Based on a patch by Larry Woodman of Red Hat.  Reworked to
maintain "unevictable" pages on a separate per-zone LRU list, to "hide"
them from vmscan.

Kosaki Motohiro added the support for the memory controller unevictable
lru list.

Pages on the unevictable list have both PG_unevictable and PG_lru set.
Thus, PG_unevictable is analogous to and mutually exclusive with
PG_active--it specifies which LRU list the page is on.

The unevictable infrastructure is enabled by a new mm Kconfig option
[CONFIG_]UNEVICTABLE_LRU.

A new function 'page_evictable(page, vma)' in vmscan.c tests whether or
not a page may be evictable.  Subsequent patches will add the various
!evictable tests.  We'll want to keep these tests light-weight for use in
shrink_active_list() and, possibly, the fault path.

To avoid races between tasks putting pages [back] onto an LRU list and
tasks that might be moving the page from non-evictable to evictable state,
the new function 'putback_lru_page()' -- inverse to 'isolate_lru_page()'
-- tests the "evictability" of a page after placing it on the LRU, before
dropping the reference.  If the page has become unevictable,
putback_lru_page() will redo the 'putback', thus moving the page to the
unevictable list.  This way, we avoid "stranding" evictable pages on the
unevictable list.

[akpm@linux-foundation.org: fix fallout from out-of-order merge]
[riel@redhat.com: fix UNEVICTABLE_LRU and !PROC_PAGE_MONITOR build]
[nishimura@mxp.nes.nec.co.jp: remove redundant mapping check]
[kosaki.motohiro@jp.fujitsu.com: unevictable-lru-infrastructure: putback_lru_page()/unevictable page handling rework]
[kosaki.motohiro@jp.fujitsu.com: kill unnecessary lock_page() in vmscan.c]
[kosaki.motohiro@jp.fujitsu.com: revert migration change of unevictable lru infrastructure]
[kosaki.motohiro@jp.fujitsu.com: revert to unevictable-lru-infrastructure-kconfig-fix.patch]
[kosaki.motohiro@jp.fujitsu.com: restore patch failure of vmstat-unevictable-and-mlocked-pages-vm-events.patch]
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Debugged-by: Benjamin Kidwell <benjkidwell@yahoo.com>
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:50:26 -07:00
Nick Piggin 62695a84eb vmscan: move isolate_lru_page() to vmscan.c
On large memory systems, the VM can spend way too much time scanning
through pages that it cannot (or should not) evict from memory.  Not only
does it use up CPU time, but it also provokes lock contention and can
leave large systems under memory presure in a catatonic state.

This patch series improves VM scalability by:

1) putting filesystem backed, swap backed and unevictable pages
   onto their own LRUs, so the system only scans the pages that it
   can/should evict from memory

2) switching to two handed clock replacement for the anonymous LRUs,
   so the number of pages that need to be scanned when the system
   starts swapping is bound to a reasonable number

3) keeping unevictable pages off the LRU completely, so the
   VM does not waste CPU time scanning them. ramfs, ramdisk,
   SHM_LOCKED shared memory segments and mlock()ed VMA pages
   are keept on the unevictable list.

This patch:

isolate_lru_page logically belongs to be in vmscan.c than migrate.c.

It is tough, because we don't need that function without memory migration
so there is a valid argument to have it in migrate.c.  However a
subsequent patch needs to make use of it in the core mm, so we can happily
move it to vmscan.c.

Also, make the function a little more generic by not requiring that it
adds an isolated page to a given list.  Callers can do that.

	Note that we now have '__isolate_lru_page()', that does
	something quite different, visible outside of vmscan.c
	for use with memory controller.  Methinks we need to
	rationalize these names/purposes.	--lts

[akpm@linux-foundation.org: fix mm/memory_hotplug.c build]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:50:25 -07:00
MinChan Kim d6bf73e434 do_migrate_pages(): remove unused variable
Signed-off-by: MinChan Kim <minchan.kim@gmail.com>
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-12 16:07:29 -07:00
Andi Kleen a551643895 hugetlb: modular state for hugetlb page size
The goal of this patchset is to support multiple hugetlb page sizes.  This
is achieved by introducing a new struct hstate structure, which
encapsulates the important hugetlb state and constants (eg.  huge page
size, number of huge pages currently allocated, etc).

The hstate structure is then passed around the code which requires these
fields, they will do the right thing regardless of the exact hstate they
are operating on.

This patch adds the hstate structure, with a single global instance of it
(default_hstate), and does the basic work of converting hugetlb to use the
hstate.

Future patches will add more hstate structures to allow for different
hugetlbfs mounts to have different page sizes.

[akpm@linux-foundation.org: coding-style fixes]
Acked-by: Adam Litke <agl@us.ibm.com>
Acked-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:17 -07:00
David Rientjes d79df630f6 mempolicy: mask off internal flags for userspace API
Flags considered internal to the mempolicy kernel code are stored as part
of the "flags" member of struct mempolicy.

Before exposing a policy type to userspace via get_mempolicy(), these
internal flags must be masked.  Flags exposed to userspace, however,
should still be returned to the user.

Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-04 13:03:05 -07:00
Lee Schermerhorn 71fe804b6d mempolicy: use struct mempolicy pointer in shmem_sb_info
This patch replaces the mempolicy mode, mode_flags, and nodemask in the
shmem_sb_info struct with a struct mempolicy pointer, initialized to NULL.
This removes dependency on the details of mempolicy from shmem.c and hugetlbfs
inode.c and simplifies the interfaces.

mpol_parse_str() in mempolicy.c is changed to return, via a pointer to a
pointer arg, a struct mempolicy pointer on success.  For MPOL_DEFAULT, the
returned pointer is NULL.  Further, mpol_parse_str() now takes a 'no_context'
argument that causes the input nodemask to be stored in the w.user_nodemask of
the created mempolicy for use when the mempolicy is installed in a tmpfs inode
shared policy tree.  At that time, any cpuset contextualization is applied to
the original input nodemask.  This preserves the previous behavior where the
input nodemask was stored in the superblock.  We can think of the returned
mempolicy as "context free".

Because mpol_parse_str() is now calling mpol_new(), we can remove from
mpol_to_str() the semantic checks that mpol_new() already performs.

Add 'no_context' parameter to mpol_to_str() to specify that it should format
the nodemask in w.user_nodemask for 'bind' and 'interleave' policies.

Change mpol_shared_policy_init() to take a pointer to a "context free" struct
mempolicy and to create a new, "contextualized" mempolicy using the mode,
mode_flags and user_nodemask from the input mempolicy.

  Note: we know that the mempolicy passed to mpol_to_str() or
  mpol_shared_policy_init() from a tmpfs superblock is "context free".  This
  is currently the only instance thereof.  However, if we found more uses for
  this concept, and introduced any ambiguity as to whether a mempolicy was
  context free or not, we could add another internal mode flag to identify
  context free mempolicies.  Then, we could remove the 'no_context' argument
  from mpol_to_str().

Added shmem_get_sbmpol() to return a reference counted superblock mempolicy,
if one exists, to pass to mpol_shared_policy_init().  We must add the
reference under the sb stat_lock to prevent races with replacement of the mpol
by remount.  This reference is removed in mpol_shared_policy_init().

[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: another build fix]
[akpm@linux-foundation.org: yet another build fix]
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:25 -07:00
Lee Schermerhorn 3f226aa1cb mempolicy: support mpol=local tmpfs mount option
For tmpfs/shmem shared policies, MPOL_DEFAULT is not necessarily equivalent to
"local allocation".  Because shared policies are at the same "scope" level
[see Documentation/vm/numa_memory_policy.txt], as vma policies MPOL_DEFAULT
means "fall back to current task policy".

This patch extends the memory policy string parsing function to display
"local" for MPOL_PREFERRED + MPOL_F_LOCAL.  This allows one to specify local
allocation as the default policy for shared memory areas via the tmpfs mpol
mount option, regardless of the current task's policy.

Also, "local" is now displayed for this policy.  This patch allows us to
accept the same input format as the display.

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:25 -07:00
Lee Schermerhorn 095f1fc4eb mempolicy: rework shmem mpol parsing and display
mm/shmem.c currently contains functions to parse and display memory policy
strings for the tmpfs 'mpol' mount option.  Move this to mm/mempolicy.c with
the rest of the mempolicy support.  With subsequent patches, we'll be able to
remove knowledge of the details [mode, flags, policy, ...] completely from
shmem.c

1) replace shmem_parse_mpol() in mm/shmem.c with mpol_parse_str() in
   mm/mempolicy.c.  Rework to use the policy_types[] array [used by
   mpol_to_str()] to look up mode by name.

2) use mpol_to_str() to format policy for shmem_show_mpol().  mpol_to_str()
   expects a pointer to a struct mempolicy, so temporarily construct one.
   This will be replaced with a reference to a struct mempolicy in the tmpfs
   superblock in a subsequent patch.

   NOTE 1: I changed mpol_to_str() to use a colon ':' rather than an equal
   sign '=' as the nodemask delimiter to match mpol_parse_str() and the
   tmpfs/shmem mpol mount option formatting that now uses mpol_to_str().  This
   is a user visible change to numa_maps, but then the addition of the mode
   flags already changed the display.  It makes sense to me to have the mounts
   and numa_maps display the policy in the same format.  However, if anyone
   objects strongly, I can pass the desired nodemask delimeter as an arg to
   mpol_to_str().

   Note 2: Like show_numa_map(), I don't check the return code from
   mpol_to_str().  I do use a longer buffer than the one provided by
   show_numa_map(), which seems to have sufficed so far.

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:24 -07:00
Lee Schermerhorn 2291990ab3 mempolicy: clean-up mpol-to-str() mempolicy formatting
mpol-to-str() formats memory policies into printable strings.  Currently this
is only used to display "numa_maps".  A subsequent patch will use
mpol_to_str() for formatting tmpfs [shmem] mpol mount options, allowing us to
remove essentially duplicate code in mm/shmem.c.  This patch cleans up
mpol_to_str() generally and in preparation for that patch.

1) show_numa_maps() is not checking the return code from mpol_to_str().
   There's not a lot we can do in this context if mpol_to_str() did return the
   error [insufficient space in buffer].  Proposed "solution": just check,
   under DEBUG_VM, that callers are providing sufficient buffer space for the
   policy, flags, and a few nodes.  This way, we'll get some display.
   show_numa_maps() is providing a 50-byte buffer, so it won't trip this
   check.  50-bytes should be sufficient unless one has a large number of
   nodes in a very sparse nodemask.

2) The display of the new mode flags ["static" & "relative"] was set up to
   display multiple flags, separated by a "bar" '|'.  However, this support is
   incomplete--e.g., need_bar was never incremented; and currently, these two
   flags are mutually exclusive.  So remove the "bar" support, for now, and
   only display one flag.

3) Use snprint() to format flags, so as not to overflow the buffer.  Not
   that it's ever happed, AFAIK.

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:24 -07:00
Lee Schermerhorn fc36b8d3d8 mempolicy: use MPOL_F_LOCAL to Indicate Preferred Local Policy
Now that we're using "preferred local" policy for system default, we need to
make this as fast as possible.  Because of the variable size of the mempolicy
structure [based on size of nodemasks], the preferred_node may be in a
different cacheline from the mode.  This can result in accessing an extra
cacheline in the normal case of system default policy.  Suspect this is the
cause of an observed 2-3% slowdown in page fault testing relative to kernel
without this patch series.

To alleviate this, use an internal mode flag, MPOL_F_LOCAL in the mempolicy
flags member which is guaranteed [?] to be in the same cacheline as the mode
itself.

Verified that reworked mempolicy now performs slightly better on 25-rc8-mm1
for both anon and shmem segments with system default and vma [preferred local]
policy.

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:24 -07:00
Lee Schermerhorn 53f2556b67 mempolicy: mPOL_PREFERRED cleanups for "local allocation"
Here are a couple of "cleanups" for MPOL_PREFERRED behavior when
v.preferred_node < 0 -- i.e., "local allocation":

1)  [do_]get_mempolicy() calls the now renamed get_policy_nodemask()
    to fetch the nodemask associated with a policy.  Currently,
    get_policy_nodemask() returns the set of nodes with memory, when
    the policy 'mode' is 'PREFERRED, and the preferred_node is < 0.
    Change to return an empty nodemask, as this is what was specified
    to achieve "local allocation".

2)  When a task is moved into a [new] cpuset, mpol_rebind_policy() is
    called to adjust any task and vma policy nodes to be valid in the
    new cpuset.  However, when the policy is MPOL_PREFERRED, and the
    preferred_node is <0, no rebind is necessary.  The "local allocation"
    indication is valid in any cpuset.  Existing code will "do the right
    thing" because node_remap() will just return the argument node when
    it is outside of the valid range of node ids.  However, I think it is
    clearer and cleaner to skip the remap explicitly in this case.

3)  mpol_to_str() produces a printable, "human readable" string from a
    struct mempolicy.  For MPOL_PREFERRED with preferred_node <0,  show
    "local", as this indicates local allocation, as the task migrates
    among nodes.  Note that this matches the usage of "local allocation"
    in libnuma() and numactl.  Without this change, I believe that node_set()
    [via set_bit()] will set bit 31, resulting in a misleading display.

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:24 -07:00
Lee Schermerhorn bea904d54d mempolicy: use MPOL_PREFERRED for system-wide default policy
Currently, when one specifies MPOL_DEFAULT via a NUMA memory policy API
[set_mempolicy(), mbind() and internal versions], the kernel simply installs a
NULL struct mempolicy pointer in the appropriate context: task policy, vma
policy, or shared policy.  This causes any use of that policy to "fall back"
to the next most specific policy scope.

The only use of MPOL_DEFAULT to mean "local allocation" is in the system
default policy.  This requires extra checks/cases for MPOL_DEFAULT in many
mempolicy.c functions.

There is another, "preferred" way to specify local allocation via the APIs.
That is using the MPOL_PREFERRED policy mode with an empty nodemask.
Internally, the empty nodemask gets converted to a preferred_node id of '-1'.
All internal usage of MPOL_PREFERRED will convert the '-1' to the id of the
node local to the cpu where the allocation occurs.

System default policy, except during boot, is hard-coded to "local
allocation".  By using the MPOL_PREFERRED mode with a negative value of
preferred node for system default policy, MPOL_DEFAULT will never occur in the
'policy' member of a struct mempolicy.  Thus, we can remove all checks for
MPOL_DEFAULT when converting policy to a node id/zonelist in the allocation
paths.

In slab_node() return local node id when policy pointer is NULL.  No need to
set a pol value to take the switch default.  Replace switch default with
BUG()--i.e., shouldn't happen.

With this patch MPOL_DEFAULT is only used in the APIs, including internal
calls to do_set_mempolicy() and in the display of policy in
/proc/<pid>/numa_maps.  It always means "fall back" to the the next most
specific policy scope.  This simplifies the description of memory policies
quite a bit, with no visible change in behavior.

get_mempolicy() continues to return MPOL_DEFAULT and an empty nodemask when
the requested policy [task or vma/shared] is NULL.  These are the values one
would supply via set_mempolicy() or mbind() to achieve that condition--default
behavior.

This patch updates Documentation to reflect this change.

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:24 -07:00
Lee Schermerhorn 52cd3b0740 mempolicy: rework mempolicy Reference Counting [yet again]
After further discussion with Christoph Lameter, it has become clear that my
earlier attempts to clean up the mempolicy reference counting were a bit of
overkill in some areas, resulting in superflous ref/unref in what are usually
fast paths.  In other areas, further inspection reveals that I botched the
unref for interleave policies.

A separate patch, suitable for upstream/stable trees, fixes up the known
errors in the previous attempt to fix reference counting.

This patch reworks the memory policy referencing counting and, one hopes,
simplifies the code.  Maybe I'll get it right this time.

See the update to the numa_memory_policy.txt document for a discussion of
memory policy reference counting that motivates this patch.

Summary:

Lookup of mempolicy, based on (vma, address) need only add a reference for
shared policy, and we need only unref the policy when finished for shared
policies.  So, this patch backs out all of the unneeded extra reference
counting added by my previous attempt.  It then unrefs only shared policies
when we're finished with them, using the mpol_cond_put() [conditional put]
helper function introduced by this patch.

Note that shmem_swapin() calls read_swap_cache_async() with a dummy vma
containing just the policy.  read_swap_cache_async() can call alloc_page_vma()
multiple times, so we can't let alloc_page_vma() unref the shared policy in
this case.  To avoid this, we make a copy of any non-null shared policy and
remove the MPOL_F_SHARED flag from the copy.  This copy occurs before reading
a page [or multiple pages] from swap, so the overhead should not be an issue
here.

I introduced a new static inline function "mpol_cond_copy()" to copy the
shared policy to an on-stack policy and remove the flags that would require a
conditional free.  The current implementation of mpol_cond_copy() assumes that
the struct mempolicy contains no pointers to dynamically allocated structures
that must be duplicated or reference counted during copy.

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:24 -07:00
Lee Schermerhorn aab0b1029f mempolicy: mark shared policies for unref
As part of yet another rework of mempolicy reference counting, we want to be
able to identify shared policies efficiently, because they have an extra ref
taken on lookup that needs to be removed when we're finished using the policy.

  Note:  the extra ref is required because the policies are
  shared between tasks/processes and can be changed/freed
  by one task while another task is using them--e.g., for
  page allocation.

Building on David Rientjes mempolicy "mode flags" enhancement, this patch
indicates a "shared" policy by setting a new MPOL_F_SHARED flag in the flags
member of the struct mempolicy added by David.  MPOL_F_SHARED, and any future
"internal mode flags" are reserved from bit zero up, as they will never be
passed in the upper bits of the mode argument of a mempolicy API.

I set the MPOL_F_SHARED flag when the policy is installed in the shared policy
rb-tree.  Don't need/want to clear the flag when removing from the tree as the
mempolicy is freed [unref'd] internally to the sp_delete() function.  However,
a task could hold another reference on this mempolicy from a prior lookup.  We
need the MPOL_F_SHARED flag to stay put so that any tasks holding a ref will
unref, eventually freeing, the mempolicy.

A later patch in this series will introduce a function to conditionally unref
[mpol_free] a policy.  The MPOL_F_SHARED flag is one reason [currently the
only reason] to unref/free a policy via the conditional free.

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:24 -07:00
Lee Schermerhorn 45c4745af3 mempolicy: rename struct mempolicy 'policy' member to 'mode'
The terms 'policy' and 'mode' are both used in various places to describe the
semantics of the value stored in the 'policy' member of struct mempolicy.
Furthermore, the term 'policy' is used to refer to that member, to the entire
struct mempolicy and to the more abstract concept of the tuple consisting of a
"mode" and an optional node or set of nodes.  Recently, we have added "mode
flags" that are passed in the upper bits of the 'mode' [or sometimes,
'policy'] member of the numa APIs.

I'd like to resolve this confusion, which perhaps only exists in my mind, by
renaming the 'policy' member to 'mode' throughout, and fixing up the
Documentation.  Man pages will be updated separately.

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:24 -07:00
Lee Schermerhorn ae4d8c16aa mempolicy: fixup Fallback for Default Shmem Policy
get_vma_policy() is not handling fallback to task policy correctly when the
get_policy() vm_op returns NULL.  The NULL overwrites the 'pol' variable that
was holding the fallback task mempolicy.  So, it was falling back directly to
system default policy.

Fix get_vma_policy() to use only non-NULL policy returned from the vma
get_policy op.

shm_get_policy() was falling back to current task's mempolicy if the "backing
file system" [tmpfs vs hugetlbfs] does not support the get_policy vm_op and
the vma policy is null.  This is incorrect for show_numa_maps() which is
likely querying the numa_maps of some task other than current.  Remove this
fallback.

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:24 -07:00
Lee Schermerhorn f4e53d910b mempolicy: write lock mmap_sem while changing task mempolicy
A read of /proc/<pid>/numa_maps holds the target task's mmap_sem for read
while examining each vma's mempolicy.  A vma's mempolicy can fall back to the
task's policy.  However, the task could be changing it's task policy and free
the one that the show_numa_maps() is examining.

To prevent this, grab the mmap_sem for write when updating task mempolicy.
Pointed out to me by Christoph Lameter and extracted and reworked from
Christoph's alternative mempol reference counting patch.

This is analogous to the way that do_mbind() and do_get_mempolicy() prevent
races between task's sharing an mm_struct [a.k.a.  threads] setting and
querying a mempolicy for a particular address.

Note: this is necessary, but not sufficient, to allow us to stop taking an
extra reference on "other task's mempolicy" in get_vma_policy.  Subsequent
patches will complete this update, allowing us to simplify the tests for
whether we need to unref a mempolicy at various points in the code.

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:23 -07:00
Lee Schermerhorn 846a16bf0f mempolicy: rename mpol_copy to mpol_dup
This patch renames mpol_copy() to mpol_dup() because, well, that's what it
does.  Like, e.g., strdup() for strings, mpol_dup() takes a pointer to an
existing mempolicy, allocates a new one and copies the contents.

In a later patch, I want to use the name mpol_copy() to copy the contents from
one mempolicy to another like, e.g., strcpy() does for strings.

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:23 -07:00
Lee Schermerhorn f0be3d32b0 mempolicy: rename mpol_free to mpol_put
This is a change that was requested some time ago by Mel Gorman.  Makes sense
to me, so here it is.

Note: I retain the name "mpol_free_shared_policy()" because it actually does
free the shared_policy, which is NOT a reference counted object.  However, ...

The mempolicy object[s] referenced by the shared_policy are reference counted,
so mpol_put() is used to release the reference held by the shared_policy.  The
mempolicy might not be freed at this time, because some task attached to the
shared object associated with the shared policy may be in the process of
allocating a page based on the mempolicy.  In that case, the task performing
the allocation will hold a reference on the mempolicy, obtained via
mpol_shared_policy_lookup().  The mempolicy will be freed when all tasks
holding such a reference have called mpol_put() for the mempolicy.

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:23 -07:00
David Rientjes 3e1f064562 mempolicy: disallow static or relative flags for local preferred mode
MPOL_F_STATIC_NODES and MPOL_F_RELATIVE_NODES don't mean anything for
MPOL_PREFERRED policies that were created with an empty nodemask (for purely
local allocations).  They'll never be invalidated because the allowed mems of
a task changes or need to be rebound relative to a cpuset's placement.

Also fixes a bug identified by Lee Schermerhorn that disallowed empty
nodemasks to be passed to MPOL_PREFERRED to specify local allocations.  [A
different, somewhat incomplete, patch already existed in 25-rc5-mm1.]

Cc: Paul Jackson <pj@sgi.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:20 -07:00
David Rientjes 37012946da mempolicy: create mempolicy_operations structure
Create a mempolicy_operations structure that currently points to two
functions[*] for the various modes:

	int (*create)(struct mempolicy *, const nodemask_t *);
	void (*rebind)(struct mempolicy *, const nodemask_t *);

This splits the implementation for the various modes out of two large
functions, mpol_new() and mpol_rebind_policy().  Eventually it may be
beneficial to add additional functions to accomodate the existing switch()
statements in mm/mempolicy.c.

 [*] The ->create() function for MPOL_DEFAULT is currently NULL since no
     struct mempolicy is dynamically allocated.

[Lee.Schermerhorn@hp.com: fix regression in the package mempolicy regression tests]
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Paul Jackson <pj@sgi.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Eric Whitney <eric.whitney@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:20 -07:00
David Rientjes 1d0d2680a0 mempolicy: move rebind functions
Move the mpol_rebind_{policy,task,mm}() functions after mpol_new() to avoid
having to declare function prototypes.

Cc: Paul Jackson <pj@sgi.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:20 -07:00
David Rientjes 4c50bc0116 mempolicy: add MPOL_F_RELATIVE_NODES flag
Adds another optional mode flag, MPOL_F_RELATIVE_NODES, that specifies
nodemasks passed via set_mempolicy() or mbind() should be considered relative
to the current task's mems_allowed.

When the mempolicy is created, the passed nodemask is folded and mapped onto
the current task's mems_allowed.  For example, consider a task using
set_mempolicy() to pass MPOL_INTERLEAVE | MPOL_F_RELATIVE_NODES with a
nodemask of 1-3.  If current's mems_allowed is 4-7, the effected nodemask is
5-7 (the second, third, and fourth node of mems_allowed).

If the same task is attached to a cpuset, the mempolicy nodemask is rebound
each time the mems are changed.  Some possible rebinds and results are:

	mems			result
	1-3			1-3
	1-7			2-4
	1,5-6			1,5-6
	1,5-7			5-7

Likewise, the zonelist built for MPOL_BIND acts on the set of zones assigned
to the resultant nodemask from the relative remap.

In the MPOL_PREFERRED case, the preferred node is remapped from the currently
effected nodemask to the relative nodemask.

This mempolicy mode flag was conceived of by Paul Jackson <pj@sgi.com>.

Cc: Paul Jackson <pj@sgi.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:19 -07:00
David Rientjes f5b087b52f mempolicy: add MPOL_F_STATIC_NODES flag
Add an optional mempolicy mode flag, MPOL_F_STATIC_NODES, that suppresses the
node remap when the policy is rebound.

Adds another member to struct mempolicy, nodemask_t user_nodemask, as part of
a union with cpuset_mems_allowed:

	struct mempolicy {
		...
		union {
			nodemask_t cpuset_mems_allowed;
			nodemask_t user_nodemask;
		} w;
	}

that stores the the nodemask that the user passed when he or she created the
mempolicy via set_mempolicy() or mbind().  When using MPOL_F_STATIC_NODES,
which is passed with any mempolicy mode, the user's passed nodemask
intersected with the VMA or task's allowed nodes is always used when
determining the preferred node, setting the MPOL_BIND zonelist, or creating
the interleave nodemask.  This happens whenever the policy is rebound,
including when a task's cpuset assignment changes or the cpuset's mems are
changed.

This creates an interesting side-effect in that it allows the mempolicy
"intent" to lie dormant and uneffected until it has access to the node(s) that
it desires.  For example, if you currently ask for an interleaved policy over
a set of nodes that you do not have access to, the mempolicy is not created
and the task continues to use the previous policy.  With this change, however,
it is possible to create the same mempolicy; it is only effected when access
to nodes in the nodemask is acquired.

It is also possible to mount tmpfs with the static nodemask behavior when
specifying a node or nodemask.  To do this, simply add "=static" immediately
following the mempolicy mode at mount time:

	mount -o remount mpol=interleave=static:1-3

Also removes mpol_check_policy() and folds its logic into mpol_new() since it
is now obsoleted.  The unused vma_mpol_equal() is also removed.

Cc: Paul Jackson <pj@sgi.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:19 -07:00
David Rientjes 028fec414d mempolicy: support optional mode flags
With the evolution of mempolicies, it is necessary to support mempolicy mode
flags that specify how the policy shall behave in certain circumstances.  The
most immediate need for mode flag support is to suppress remapping the
nodemask of a policy at the time of rebind.

Both the mempolicy mode and flags are passed by the user in the 'int policy'
formal of either the set_mempolicy() or mbind() syscall.  A new constant,
MPOL_MODE_FLAGS, represents the union of legal optional flags that may be
passed as part of this int.  Mempolicies that include illegal flags as part of
their policy are rejected as invalid.

An additional member to struct mempolicy is added to support the mode flags:

	struct mempolicy {
		...
		unsigned short policy;
		unsigned short flags;
	}

The splitting of the 'int' actual passed by the user is done in
sys_set_mempolicy() and sys_mbind() for their respective syscalls.  This is
done by intersecting the actual with MPOL_MODE_FLAGS, rejecting the syscall of
there are additional flags, and storing it in the new 'flags' member of struct
mempolicy.  The intersection of the actual with ~MPOL_MODE_FLAGS is stored in
the 'policy' member of the struct and all current users of pol->policy remain
unchanged.

The union of the policy mode and optional mode flags is passed back to the
user in get_mempolicy().

This combination of mode and flags within the same actual does not break
userspace code that relies on get_mempolicy(&policy, ...) and either

	switch (policy) {
	case MPOL_BIND:
		...
	case MPOL_INTERLEAVE:
		...
	};

statements or

	if (policy == MPOL_INTERLEAVE) {
		...
	}

statements.  Such applications would need to use optional mode flags when
calling set_mempolicy() or mbind() for these previously implemented statements
to stop working.  If an application does start using optional mode flags, it
will need to mask the optional flags off the policy in switch and conditional
statements that only test mode.

An additional member is also added to struct shmem_sb_info to store the
optional mode flags.

[hugh@veritas.com: shmem mpol: fix build warning]
Cc: Paul Jackson <pj@sgi.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:19 -07:00
David Rientjes a3b51e0142 mempolicy: convert MPOL constants to enum
The mempolicy mode constants, MPOL_DEFAULT, MPOL_PREFERRED, MPOL_BIND, and
MPOL_INTERLEAVE, are better declared as part of an enum since they are
sequentially numbered and cannot be combined.

The policy member of struct mempolicy is also converted from type short to
type unsigned short.  A negative policy does not have any legitimate meaning,
so it is possible to change its type in preparation for adding optional mode
flags later.

The equivalent member of struct shmem_sb_info is also changed from int to
unsigned short.

For compatibility, the policy formal to get_mempolicy() remains as a pointer
to an int:

	int get_mempolicy(int *policy, unsigned long *nmask,
			  unsigned long maxnode, unsigned long addr,
			  unsigned long flags);

although the only possible values is the range of type unsigned short.

Cc: Paul Jackson <pj@sgi.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:19 -07:00
Mel Gorman 19770b3260 mm: filter based on a nodemask as well as a gfp_mask
The MPOL_BIND policy creates a zonelist that is used for allocations
controlled by that mempolicy.  As the per-node zonelist is already being
filtered based on a zone id, this patch adds a version of __alloc_pages() that
takes a nodemask for further filtering.  This eliminates the need for
MPOL_BIND to create a custom zonelist.

A positive benefit of this is that allocations using MPOL_BIND now use the
local node's distance-ordered zonelist instead of a custom node-id-ordered
zonelist.  I.e., pages will be allocated from the closest allowed node with
available memory.

[Lee.Schermerhorn@hp.com: Mempolicy: update stale documentation and comments]
[Lee.Schermerhorn@hp.com: Mempolicy: make dequeue_huge_page_vma() obey MPOL_BIND nodemask]
[Lee.Schermerhorn@hp.com: Mempolicy: make dequeue_huge_page_vma() obey MPOL_BIND nodemask rework]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:19 -07:00
Mel Gorman dd1a239f6f mm: have zonelist contains structs with both a zone pointer and zone_idx
Filtering zonelists requires very frequent use of zone_idx().  This is costly
as it involves a lookup of another structure and a substraction operation.  As
the zone_idx is often required, it should be quickly accessible.  The node idx
could also be stored here if it was found that accessing zone->node is
significant which may be the case on workloads where nodemasks are heavily
used.

This patch introduces a struct zoneref to store a zone pointer and a zone
index.  The zonelist then consists of an array of these struct zonerefs which
are looked up as necessary.  Helpers are given for accessing the zone index as
well as the node index.

[kamezawa.hiroyu@jp.fujitsu.com: Suggested struct zoneref instead of embedding information in pointers]
[hugh@veritas.com: mm-have-zonelist: fix memcg ooms]
[hugh@veritas.com: just return do_try_to_free_pages]
[hugh@veritas.com: do_try_to_free_pages gfp_mask redundant]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Christoph Lameter <clameter@sgi.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:18 -07:00
Mel Gorman 0e88460da6 mm: introduce node_zonelist() for accessing the zonelist for a GFP mask
Introduce a node_zonelist() helper function.  It is used to lookup the
appropriate zonelist given a node and a GFP mask.  The patch on its own is a
cleanup but it helps clarify parts of the two-zonelist-per-node patchset.  If
necessary, it can be merged with the next patch in this set without problems.

Reviewed-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:18 -07:00
Lee Schermerhorn 69682d852f mempolicy: fix reference counting bugs
Address 3 known bugs in the current memory policy reference counting method.
I have a series of patches to rework the reference counting to reduce overhead
in the allocation path.  However, that series will require testing in -mm once
I repost it.

1) alloc_page_vma() does not release the extra reference taken for
   vma/shared mempolicy when the mode == MPOL_INTERLEAVE.  This can result in
   leaking mempolicy structures.  This is probably occurring, but not being
   noticed.

   Fix:  add the conditional release of the reference.

2) hugezonelist unconditionally releases a reference on the mempolicy when
   mode == MPOL_INTERLEAVE.  This can result in decrementing the reference
   count for system default policy [should have no ill effect] or premature
   freeing of task policy.  If this occurred, the next allocation using task
   mempolicy would use the freed structure and probably BUG out.

   Fix:  add the necessary check to the release.

3) The current reference counting method assumes that vma 'get_policy()'
   methods automatically add an extra reference a non-NULL returned mempolicy.
    This is true for shmem_get_policy() used by tmpfs mappings, including
   regular page shm segments.  However, SHM_HUGETLB shm's, backed by
   hugetlbfs, just use the vma policy without the extra reference.  This
   results in freeing of the vma policy on the first allocation, with reuse of
   the freed mempolicy structure on subsequent allocations.

   Fix: Rather than add another condition to the conditional reference
   release, which occur in the allocation path, just add a reference when
   returning the vma policy in shm_get_policy() to match the assumptions.

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Greg KH <greg@kroah.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: David Rientjes <rientjes@google.com>
Cc: <eric.whitney@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-10 18:01:19 -07:00
Jan Blunck c32c2f63a9 d_path: Make seq_path() use a struct path argument
seq_path() is always called with a dentry and a vfsmount from a struct path.
Make seq_path() take it directly as an argument.

Signed-off-by: Jan Blunck <jblunck@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-14 21:17:08 -08:00
KOSAKI Motohiro 31f1de46b9 mempolicy: silently restrict nodemask to allowed nodes
Kosaki Motohito noted that "numactl --interleave=all ..." failed in the
presence of memoryless nodes.  This patch attempts to fix that problem.

Some background:

numactl --interleave=all calls set_mempolicy(2) with a fully populated
[out to MAXNUMNODES] nodemask.  set_mempolicy() [in do_set_mempolicy()]
calls contextualize_policy() which requires that the nodemask be a
subset of the current task's mems_allowed; else EINVAL will be returned.

A task's mems_allowed will always be a subset of node_states[N_HIGH_MEMORY]
i.e., nodes with memory.  So, a fully populated nodemask will be
declared invalid if it includes memoryless nodes.

  NOTE:  the same thing will occur when running in a cpuset
         with restricted mem_allowed--for the same reason:
         node mask contains dis-allowed nodes.

mbind(2), on the other hand, just masks off any nodes in the nodemask
that are not included in the caller's mems_allowed.

In each case [mbind() and set_mempolicy()], mpol_check_policy() will
complain [again, resulting in EINVAL] if the nodemask contains any
memoryless nodes.  This is somewhat redundant as mpol_new() will remove
memoryless nodes for interleave policy, as will bind_zonelist()--called
by mpol_new() for BIND policy.

Proposed fix:

1) modify contextualize_policy logic to:
   a) remember whether the incoming node mask is empty.
   b) if not, restrict the nodemask to allowed nodes, as is
      currently done in-line for mbind().  This guarantees
      that the resulting mask includes only nodes with memory.

      NOTE:  this is a [benign, IMO] change in behavior for
             set_mempolicy().  Dis-allowed nodes will be
             silently ignored, rather than returning an error.

   c) fold this code into mpol_check_policy(), replace 2 calls to
      contextualize_policy() to call mpol_check_policy() directly
      and remove contextualize_policy().

2) In existing mpol_check_policy() logic, after "contextualization":
   a) MPOL_DEFAULT:  require that in coming mask "was_empty"
   b) MPOL_{BIND|INTERLEAVE}:  require that contextualized nodemask
      contains at least one node.
   c) add a case for MPOL_PREFERRED:  if in coming was not empty
      and resulting mask IS empty, user specified invalid nodes.
      Return EINVAL.
   c) remove the now redundant check for memoryless nodes

3) remove the now redundant masking of policy nodes for interleave
   policy from mpol_new().

4) Now that mpol_check_policy() contextualizes the nodemask, remove
   the in-line nodes_and() from sys_mbind().  I believe that this
   restores mbind() to the behavior before the memoryless-nodes
   patch series.  E.g., we'll no longer treat an invalid nodemask
   with MPOL_PREFERRED as local allocation.

[ Patch history:

  v1 -> v2:
   - Communicate whether or not incoming node mask was empty to
     mpol_check_policy() for better error checking.
   - As suggested by David Rientjes, remove the now unused
     cpuset_nodes_subset_current_mems_allowed() from cpuset.h

  v2 -> v3:
   - As suggested by Kosaki Motohito, fold the "contextualization"
     of policy nodemask into mpol_check_policy().  Looks a little
     cleaner. ]

Signed-off-by:  Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by:  KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Tested-by:      KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by:       David Rientjes <rientjes@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-11 20:48:29 -08:00
Lee Schermerhorn 3ad33b2436 Migration: find correct vma in new_vma_page()
We hit the BUG_ON() in mm/rmap.c:vma_address() when trying to migrate via
mbind(MPOL_MF_MOVE) a non-anon region that spans multiple vmas.  For
anon-regions, we just fail to migrate any pages beyond the 1st vma in the
range.

This occurs because do_mbind() collects a list of pages to migrate by
calling check_range().  check_range() walks the task's mm, spanning vmas as
necessary, to collect the migratable pages into a list.  Then, do_mbind()
calls migrate_pages() passing the list of pages, a function to allocate new
pages based on vma policy [new_vma_page()], and a pointer to the first vma
of the range.

For each page in the list, new_vma_page() calls page_address_in_vma()
passing the page and the vma [first in range] to obtain the address to get
for alloc_page_vma().  The page address is needed to get interleaving
policy correct.  If the pages in the list come from multiple vmas,
eventually, new_page_address() will pass that page to page_address_in_vma()
with the incorrect vma.  For !PageAnon pages, this will result in a bug
check in rmap.c:vma_address().  For anon pages, vma_address() will just
return EFAULT and fail the migration.

This patch modifies new_vma_page() to check the return value from
page_address_in_vma().  If the return value is EFAULT, new_vma_page()
searchs forward via vm_next for the vma that maps the page--i.e., that does
not return EFAULT.  This assumes that the pages in the list handed to
migrate_pages() is in address order.  This is currently case.  The patch
documents this assumption in a new comment block for new_vma_page().

If new_vma_page() cannot locate the vma mapping the page in a forward
search in the mm, it will pass a NULL vma to alloc_page_vma().  This will
result in the allocation using the task policy, if any, else system default
policy.  This situation is unlikely, but the patch documents this behavior
with a comment.

Note, this patch results in restarting from the first vma in a multi-vma
range each time new_vma_page() is called.  If this is not acceptable, we
can make the vma argument a pointer, both in new_vma_page() and it's caller
unmap_and_move() so that the value held by the loop in migrate_pages()
always passes down the last vma in which a page was found.  This will
require changes to all new_page_t functions passed to migrate_pages().  Is
this necessary?

For this patch to work, we can't bug check in vma_address() for pages
outside the argument vma.  This patch removes the BUG_ON().  All other
callers [besides new_vma_page()] already check the return status.

Tested on x86_64, 4 node NUMA platform.

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:38 -08:00
Pavel Emelyanov 228ebcbe63 Uninline find_task_by_xxx set of functions
The find_task_by_something is a set of macros are used to find task by pid
depending on what kind of pid is proposed - global or virtual one.  All of
them are wrappers above the most generic one - find_task_by_pid_type_ns() -
and just substitute some args for it.

It turned out, that dereferencing the current->nsproxy->pid_ns construction
and pushing one more argument on the stack inline cause kernel text size to
grow.

This patch moves all this stuff out-of-line into kernel/pid.c.  Together
with the next patch it saves a bit less than 400 bytes from the .text
section.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Paul Menage <menage@google.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:40 -07:00
Pavel Emelyanov b488893a39 pid namespaces: changes to show virtual ids to user
This is the largest patch in the set. Make all (I hope) the places where
the pid is shown to or get from user operate on the virtual pids.

The idea is:
 - all in-kernel data structures must store either struct pid itself
   or the pid's global nr, obtained with pid_nr() call;
 - when seeking the task from kernel code with the stored id one
   should use find_task_by_pid() call that works with global pids;
 - when showing pid's numerical value to the user the virtual one
   should be used, but however when one shows task's pid outside this
   task's namespace the global one is to be used;
 - when getting the pid from userspace one need to consider this as
   the virtual one and use appropriate task/pid-searching functions.

[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: nuther build fix]
[akpm@linux-foundation.org: yet nuther build fix]
[akpm@linux-foundation.org: remove unneeded casts]
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org>
Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Paul Menage <menage@google.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:40 -07:00
Paul Menage 8793d854ed Task Control Groups: make cpusets a client of cgroups
Remove the filesystem support logic from the cpusets system and makes cpusets
a cgroup subsystem

The "cpuset" filesystem becomes a dummy filesystem; attempts to mount it get
passed through to the cgroup filesystem with the appropriate options to
emulate the old cpuset filesystem behaviour.

Signed-off-by: Paul Menage <menage@google.com>
Cc: Serge E. Hallyn <serue@us.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Paul Jackson <pj@sgi.com>
Cc: Kirill Korotaev <dev@openvz.org>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Srivatsa Vaddagiri <vatsa@in.ibm.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:36 -07:00
Adrian Bunk dbcb0f19c8 mm/mempolicy.c: cleanups
This patch contains the following cleanups:
- every file should include the headers containing the prototypes for
  its global functions
- make the follosing needlessly global functions static:
  - migrate_to_node()
  - do_mbind()
  - sp_alloc()
  - mpol_rebind_policy()

[akpm@linux-foundation.org: fix uninitialised var warning]
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:03 -07:00
Lee Schermerhorn 37b07e4163 memoryless nodes: fixup uses of node_online_map in generic code
Here's a cut at fixing up uses of the online node map in generic code.

mm/shmem.c:shmem_parse_mpol()

	Ensure nodelist is subset of nodes with memory.
	Use node_states[N_HIGH_MEMORY] as default for missing
	nodelist for interleave policy.

mm/shmem.c:shmem_fill_super()

	initialize policy_nodes to node_states[N_HIGH_MEMORY]

mm/page-writeback.c:highmem_dirtyable_memory()

	sum over nodes with memory

mm/page_alloc.c:zlc_setup()

	allowednodes - use nodes with memory.

mm/page_alloc.c:default_zonelist_order()

	average over nodes with memory.

mm/page_alloc.c:find_next_best_node()

	skip nodes w/o memory.
	N_HIGH_MEMORY state mask may not be initialized at this time,
	unless we want to depend on early_calculate_totalpages() [see
	below].  Will ZONE_MOVABLE ever be configurable?

mm/page_alloc.c:find_zone_movable_pfns_for_nodes()

	spread kernelcore over nodes with memory.

	This required calling early_calculate_totalpages()
	unconditionally, and populating N_HIGH_MEMORY node
	state therein from nodes in the early_node_map[].
	If we can depend on this, we can eliminate the
	population of N_HIGH_MEMORY mask from __build_all_zonelists()
	and use the N_HIGH_MEMORY mask in find_next_best_node().

mm/mempolicy.c:mpol_check_policy()

	Ensure nodes specified for policy are subset of
	nodes with memory.

[akpm@linux-foundation.org: fix warnings]
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Christoph Lameter <clameter@sgi.com>
Cc: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:42:59 -07:00
Christoph Lameter 56bbd65df0 Memoryless nodes: Update memory policy and page migration
Online nodes now may have no memory.  The checks and initialization must
therefore be changed to no longer use the online functions.

This will correctly initialize the interleave on bootup to only target nodes
with memory and will make sys_move_pages return an error when a page is to be
moved to a memoryless node.  Similarly we will get an error if MPOL_BIND and
MPOL_INTERLEAVE is used on a memoryless node.

These are somewhat new semantics.  So far one could specify memoryless nodes
and we would maybe do the right thing and just ignore the node (or we'd do
something strange like with MPOL_INTERLEAVE).  If we want to allow the
specification of memoryless nodes via memory policies then we need to keep
checking for online nodes.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Acked-by: Nishanth Aravamudan <nacc@us.ibm.com>
Tested-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Bob Picco <bob.picco@hp.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@skynet.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:42:58 -07:00
Christoph Lameter 6eaf806a22 Memoryless nodes: Fix interleave behavior for memoryless nodes
MPOL_INTERLEAVE currently simply loops over all nodes.  Allocations on
memoryless nodes will be redirected to nodes with memory.  This results in an
imbalance because the neighboring nodes to memoryless nodes will get
significantly more interleave hits that the rest of the nodes on the system.

We can avoid this imbalance by clearing the nodes in the interleave node set
that have no memory.  If we use the node map of the memory nodes instead of
the online nodes then we have only the nodes we want.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Tested-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Bob Picco <bob.picco@hp.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@skynet.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:42:58 -07:00
Lee Schermerhorn 754af6f5a8 Mem Policy: add MPOL_F_MEMS_ALLOWED get_mempolicy() flag
Allow an application to query the memories allowed by its context.

Updated numa_memory_policy.txt to mention that applications can use this to
obtain allowed memories for constructing valid policies.

TODO:  update out-of-tree libnuma wrapper[s], or maybe add a new
wrapper--e.g.,  numa_get_mems_allowed() ?

Also, update numa syscall man pages.

Tested with memtoy V>=0.13.

Signed-off-by:  Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Christoph Lameter <clameter@sgi.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:42:54 -07:00