This takes the tiling info from the connector and
exposes it to userspace, as a blob object in a
connector property.
The contents of the blob is ABI.
v2: add property + function documentation.
v3: move property setup from previous patch.
add boilerplate + fix long line (Daniel)
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This creates a tile group from DisplayID block, and
stores the pieces of parsed info from the DisplayID block
into the connector.
v2: add missing signoff, add new connector bits to docs.
v3: remove some debugging.
Signed-off-by: Dave Airlie <airlied@redhat.com>
A tile group is an identifier shared by a single monitor,
DisplayID topology has 8 bytes we can use for this, just
use those for now until something else comes up in the
future. We assign these to an idr and use the idr to
tell userspace what connectors are in the same tile group.
DisplayID v1.3 says the serial number must be unique for
displays from the same manufacturer.
v2:
destroy idr (dvdhrm)
add docbook (danvet)
airlied:- not sure how to make docbook add fns to tile group section.
v3: fix missing unlock.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Add helper macros to iterate the current, or incoming set of planes
attached to a crtc. These helpers are only available for drivers
converted to use atomic-helpers.
Signed-off-by: Rob Clark <robdclark@gmail.com>
[danvet: Squash in fixup from Rob to move the planemask iterator to
drm_crtc.h and document it. That one is needed by the atomic ioctl so
can't be in a helper library.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chasing plane->state->crtc of planes that are *not* part of the same
atomic update is racy, making it incredibly awkward (or impossible) to
do something simple like iterate over all planes and figure out which
ones are attached to a crtc.
Solve this by adding a bitmask of currently attached planes in the
crtc-state.
Note that the transitional helpers do not maintain the plane_mask. But
they only support the legacy ioctls, which have sufficient brute-force
locking around plane updates that they can continue to loop over all
planes to see what is attached to a crtc the old way.
Signed-off-by: Rob Clark <robdclark@gmail.com>
[danvet:
- Drop comments about locking in set_crtc_for_plane since they're a
bit misleading - we already should hold lock for the current crtc.
- Also WARN_ON if get_state on the old crtc fails since that should
have been done already.
- Squash in fixup to check get_plane_state return value, reported by
Dan Carpenter and acked by Rob Clark.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
I guess for hysterical raisins this was meant to be the way to read
blob properties. But that's done with the two-stage approach which
uses separate blob kms object and the special-purpose get_blob ioctl.
Shipping userspace seems to have never relied on this, and the kernel
also never put any blob thing onto that property. And nowadays it
would blow up, e.g. in drm_property_destroy. Also it makes no sense to
return values in an ioctl that only returns metadata about everything.
So let's ditch all the internal code for the blob list, rename the
list to be unambiguous and sprinkle comments all over the place to
explain this peculiar piece of api.
v2: Squash in fixup from Rob to remove now unused variables.
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Yet another fallout from not considering DP MST hotplug. With the
previous patches we have stable indices, but it might still happen
that a connector gets added between when we allocate the array and
when we actually add a connector. Especially when we back off due to
ww mutex contention or similar issues.
So store the sizes of the arrays in struct drm_atomic_state and double
check them. We don't really care about races except that we want to
use a consistent value, so ACCESS_ONCE is all we need. And if we
indeed notice that we'd overrun the array then just give up and
restart the entire ioctl.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Virtual GPUs would like to give the guest some indication where on the screen
the outputs are layed out. So far we only provide modes, these
properties could be exposed to userspace so the desktop environment
could use them as hints to set the correct offsets.
v2: rename properties to be more consistent.
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is a small collection of fixes that I've been carrying around for a
while now. Many of these have been posted and reviewed or acked. The few
that haven't I deemed too trivial to bother.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=OUaP
-----END PGP SIGNATURE-----
Merge tag 'drm/fixes/for-3.19-rc1' of git://people.freedesktop.org/~tagr/linux into drm-next
drm: Miscellaneous fixes for v3.19-rc1
This is a small collection of fixes that I've been carrying around for a
while now. Many of these have been posted and reviewed or acked. The few
that haven't I deemed too trivial to bother.
* tag 'drm/fixes/for-3.19-rc1' of git://people.freedesktop.org/~tagr/linux:
video/hdmi: Relicense header under MIT license
drm/gma500: mdfld: Reuse video/mipi_display.h
drm: Make drm_mode_create_tv_properties() signature consistent
drm: Implement drm_get_pci_dev() dummy for !PCI
drm/prime: Use unsigned type for number of pages
drm/gem: Fix typo in kerneldoc
drm: Use const data when creating blob properties
drm: Use size_t for blob property sizes
The prototype and the function implementation differ in their signature.
Make them consistent and use an unsigned integer for the number of modes
while at it.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Creating a blob property will always copy the input data so the data
that is passed in can be const.
Signed-off-by: Thierry Reding <treding@nvidia.com>
size_t is the standard type when dealing with sizes of all kinds. Use it
consistently when instantiating DRM blob properties.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Turned out to be much simpler on top of my latest atomic stuff than
what I've feared. Some details:
- Drop the modeset_lock_all snakeoil in drm_plane_init. Same
justification as for the equivalent change in drm_crtc_init done in
commit d0fa1af40e
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Mon Sep 8 09:02:49 2014 +0200
drm: Drop modeset locking from crtc init function
Without these the drm_modeset_lock_init would fall over the exact
same way.
- Since the atomic core code wraps the locking switching it to
per-plane locks was a one-line change.
- For the legacy ioctls add a plane argument to the locking helper so
that we can grab the right plane lock (cursor or primary). Since the
universal cursor plane might not be there, or someone really crazy
might forgoe the primary plane even accept NULL.
- Add some locking WARN_ON to the atomic helpers for good paranoid
measure and to check that it all works out.
Tested on my exynos atomic hackfest with full lockdep checks and ww
backoff injection.
v2: I've forgotten about the load-detect code in i915.
v3: Thierry reported that in latest 3.18-rc vmwgfx doesn't compile any
more due to
commit 21e88620aa
Author: Rob Clark <robdclark@gmail.com>
Date: Thu Oct 30 13:39:04 2014 -0400
drm/vmwgfx: fix lock breakage
Rebased and fix this up.
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This patch is for enabling async commits. It replaces an earlier
approach which added an async boolean paramter to the ->prepare_fb
callbacks. The idea is that prepare_fb picks up the right fence to
synchronize against, which is then used by the synchronous commit
helper. For async commits drivers can either register a callback to
the fence or simply do the synchronous wait in their async work queue.
v2: Remove unused variable.
v3: Only wait for fences after the point of no return in the part
of the commit function which can be run asynchronously. This is after
the atomic state has been swapped in, hence now check
plane->state->fence.
Also add a WARN_ON to make sure we don't try to wait on a fence when
there's no fb, just as a sanity check.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
So this is finally the integration of the crtc and plane helper
interfaces into the atomic helper functions.
In the check function we now have a few steps:
- First we update the output routing and figure out which crtcs need a
full mode set. Suitable encoders are selected using ->best_encoder,
with the same semantics as the crtc helpers of implicitly disabling
all connectors currently using the encoder.
- Then we pull all other connectors into the state update which feed
from a crtc which changes. This must be done do catch mode changes
and similar updates - atomic updates are differences on top of the
current state.
- Then we call all the various ->mode_fixup to compute the adjusted
mode. Note that here we have a slight semantic difference compared
to the crtc helpers: We have not yet updated the encoder->crtc link
when calling the encoder's ->mode_fixup function. But that's a
requirement when converting to atomic since we want to prepare the
entire state completely contained with the over drm_atomic_state
structure. So this must be carefully checked when converting drivers
over to atomic helpers.
- Finally we do call the atomic_check functions on planes and crtcs.
The commit function is also quite a beast:
- The only step that can fail is done first, namely pinning the
framebuffers. After that we cross the point of no return, an async
commit would push all that into the worker thread.
- The disabling of encoders and connectors is a bit tricky, since
depending upon the final state we need to select different crtc
helper functions.
- Software tracking is a bit clarified compared to the crtc helpers:
We commit the software state before starting to touch the hardware,
like crtc helpers. But since we just swap them we still have the old
state (i.e. the current hw state) around, which is really handy to
write simple disable functions. So no more
drm_crtc_helper_disable_all_unused_functions kind of fun because
we're leaving unused crtcs/encoders behind. Everything gets shut
down in-order now, which is one of the key differences of the i915
helpers compared to crtc helpers and a really nice additional
guarantee.
- Like with the plane helpers the atomic commit function waits for one
vblank to pass before calling the framebuffer cleanup function.
Compared to Rob's helper approach there's a bunch of upsides:
- All the interfaces which can fail are called in the ->check hook
(i.e. ->best_match and the various ->mode_fixup hooks). This means
that drivers can just reuse those functions and don't need to move
everything into ->atomic_check callbacks. If drivers have no need
for additional constraint checking beyong their existing crtc
helper callbacks they don't need to do anything.
- The actual commit operation is properly stage: First we prepare
framebuffers, which can potentially still fail (due to memory
exhausting). This is important for the async case, where this must
be done synchronously to correctly return errors.
- The output configuration changes (done with crtc helper functions)
and the plane update (using atomic plane helpers) are correctly
interleaved: First we shut down any crtcs that need changing, then
we update planes and finally we enable everything again. Hardware
without GO bits must be more careful with ordering, which this
sequence enables.
- Also for hardware with shared output resources (like display PLLs)
we first must shut down the old configuration before we can enable
the new one. Otherwise we can hit an impossible intermediate state
where there's not enough PLLs (which is the point behind atomic
updates).
v2:
- Ensure that users of ->check update crtc_state->enable correctly.
- Update the legacy state in crtc/plane structures. Eventually we want
to remove that, but for now the drm core still expects this (especially
the plane->fb pointer).
v3: A few changes for better async handling:
- Reorder the software side state commit so that it happens all before
we touch the hardware. This way async support becomes very easy
since we can punt all the actual hw touching to a worker thread. And
as long as we synchronize with that thread (flushing or cancelling,
depending upon what the driver can handle) before we commit the next
software state there's no need for any locking in the worker thread
at all. Which greatly simplifies things.
And as long as we synchronize with all relevant threads we can have
a lot of them (e.g. per-crtc for per-crtc updates) running in
parallel.
- Expose pre/post plane commit steps separately. We need to expose the
actual hw commit step anyway for drivers to be able to implement
asynchronous commit workers. But if we expose pre/post and plane
commit steps individually we allow drivers to selectively use atomic
helpers.
- I've forgotten to call encoder/bridge ->mode_set functions, fix
this.
v4: Add debug output and fix a mixup between current and new state
that resulted in crtcs not getting updated correctly. And in an
Oops ...
v5:
- Be kind to driver writers in the vblank wait functions.. if thing
aren't working yet, and vblank irq will never come, then let's not
block forever.. especially under console-lock.
- Correctly clear connector_state->best_encoder when disabling.
Spotted while trying to understand a report from Rob Clark.
- Only steal encoder if it actually changed, otherwise hilarity ensues
if we steal from the current connector and so set the ->crtc pointer
unexpectedly to NULL. Reported by Rob Clark.
- Bail out in disable_outputs if an output currently doesn't have a
best_encoder - this means it's already disabled.
v6: Fixupe kerneldoc as reported by Paulo. And also fix up kerneldoc
in drm_crtc.h.
v7: Take ownership of the atomic state and clean it up with
drm_atomic_state_free().
v8 Various improvements all over:
- Polish code comments and kerneldoc.
- Improve debug output to make sure all failure cases are logged.
- Treat enabled crtc with no connectors as invalid input from userspace.
- Don't ignore the return value from mode_fixup().
v9:
- Improve debug output for crtc_state->mode_changed.
v10:
- Fixup the vblank waiting code to properly balance the vblank_get/put
calls.
- Better comments when checking/computing crtc->mode_changed
v11: Fixup the encoder stealing logic: We can't look at encoder->crtc
since that's not in the atomic state structures and might be updated
asynchronously in and async commit. Instead we need to inspect all the
connector states and check whether the encoder is currently in used
and if so, on which crtc.
v12: Review from Sean:
- A few spelling fixes.
- Flatten control flow indent by converting if blocks to early
continue/return in 2 places.
- Capture connectors_for_crtc return value in int num_connectors
instead of bool has_connectors and do an explicit int->bool
conversion with !!. I think the helper is more useful for drivers if
it returns the number of connectors (e.g. to detect cloning
configurations), so decided to keep that return value.
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Paulo Zanoni <przanoni@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
These two functions allow drivers to reuse their atomic plane helpers
functions for the primary plane to implement the interfaces required
by the crtc helpers for the legacy ->set_config callback.
This is purely transitional and won't be used once the driver is fully
converted. But it allows partial conversions to the atomic plane
helpers which are functional.
v2:
- Use ->atomic_duplicate_state if available.
- Don't forget to run crtc_funcs->atomic_check.
v3: Shift source coordinates correctly for 16.16 fixed point.
v4: Don't forget to call ->atomic_destroy_state if available.
v5: Fixup kerneldoc.
v6: Reuse the plane_commit function from the transitional plane
helpers to avoid too much duplication.
v7:
- Remove some stale comment.
- Correctly handle the lack of plane->state object, necessary for
transitional use.
v8: Fixup an embarrassing h/vdisplay mixup.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This is the first cut of atomic helper code. As-is it's only useful to
implement a pure atomic interface for plane updates.
Later patches will integrate this with the crtc helpers so that full
atomic updates are possible. We also need a pile of helpers to aid
drivers in transitioning from the legacy world to the shiny new atomic
age. Finally we need helpers to implement legacy ioctls on top of the
atomic interface.
The design of the overall helpers<->driver interaction is fairly
simple, but has an unfortunate large interface:
- We have ->atomic_check callbacks for crtcs and planes. The idea is
that connectors don't need any checking, and if they do they can
adjust the relevant crtc driver-private state. So no connector hooks
should be needed. Also the crtc helpers integration will do the
->best_encoder checks, so no need for that.
- Framebuffer pinning needs to be done before we can commit to the hw
state. This is especially important for async updates where we must
pin all buffers before returning to userspace, so that really only
hw failures can happen in the asynchronous worker.
Hence we add ->prepare_fb and ->cleanup_fb hooks for this resources
management.
- The actual atomic plane commit can't fail (except hw woes), so has
void return type. It has three stages:
1. Prepare all affected crtcs with crtc->atomic_begin. Drivers can
use this to unset the GO bit or similar latches to prevent plane
updates.
2. Update plane state by looping over all changed planes and calling
plane->atomic_update. Presuming the hardware is sane and has GO
bits drivers can simply bash the state into the hardware in this
function. Other drivers might use this to precompute hw state for
the final step.
3. Finally latch the update for the next vblank with
crtc->atomic_flush. Note that this function doesn't need to wait
for the vblank to happen even for the synchronous case.
v2: Clear drm_<obj>_state->state to NULL when swapping in state.
v3: Add TODO that we don't short-circuit plane updates for now. Likely
no one will care.
v4: Squash in a bit of polish that somehow landed in the wrong (later)
patche.
v5: Integrate atomic functions into the drm docbook and fixup the
kerneldoc.
v6: Fixup fixup patch squashing fumble.
v7: Don't touch the legacy plane state plane->fb and plane->crtc. This
is only used by the legacy ioctl code in the drm core, and that code
already takes care of updating the pointers in all relevant cases.
This is in stark contrast to connector->encoder->crtc links on the
modeset side, which we still need to set since the core doesn't touch
them.
Also some more kerneldoc polish.
v8: Drop outdated comment.
v9: Handle the state->state pointer correctly: Only clearing the
->state pointer when assigning the state to the kms object isn't good
enough. We also need to re-link the swapped out state into the
drm_atomic_state structure.
v10: Shuffle the misplaced docbook template hunk around that Sean spotted.
Cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Some differences compared to Rob's patches again:
- Dropped the committed and checked booleans. Checking will be
internally enforced by always calling ->atomic_check before
->atomic_commit. And async handling needs to be solved differently
because the current scheme completely side-steps ww mutex deadlock
avoidance (and so either reinvents a new deadlock avoidance wheel or
like the current code just deadlocks).
- State for connectors needed to be added, since now they have a
full-blown drm_connector_state (so that drivers have something to
attach their own stuff to).
- Refcounting is gone. I plane to solve async updates differently,
since the lock-passing scheme doesn't cut it (since it abuses ww
mutexes). Essentially what we need for async is a simple ownership
transfer from the caller to the driver. That doesn't need full-blown
refcounting.
- The acquire ctx is a pointer. Real atomic callers should have that
on their stack, legacy entry points need to put the right one
(obtained by drm_modeset_legacy_acuire_ctx) in there.
- I've dropped all hooks except check/commit. All the begin/end
handling is done by core functions and is the same.
- commit/check are just thin wrappers that ensure that ->check is
always called.
- To help out with locking in the legacy implementations I've added a
helper to just grab all locks in the backoff case.
v2: Add notices that check/commit can fail with EDEADLK.
v3:
- More consistent naming for state_alloc.
- Add state_clear which is needed for backoff and retry.
v4: Planes/connectors can switch between crtcs, and we need to be
careful that we grab the state (and locks) for both the old and new
crtc. Improve the interface functions to ensure this.
v5: Add functions to grab affected connectors for a crtc and to recompute
the crtc->enable state. This is useful for both helper and atomic ioctl
code when e.g. removing a connector.
v6: Squash in fixup from Fengguang to use ERR_CAST.
v7: Add debug output.
v8: Make checkpatch happy about kcalloc argument ordering.
v9: Improve kerneldoc in drm_crtc.h
v10:
- Fix another kcalloc argument misorder I've missed.
- More polish for kerneldoc.
v11: Clarify the ownership rules for the state object. The new rule is
that a successful drm_atomic_commit (whether synchronous or asnyc)
always inherits the state and is responsible for the clean-up. That
way async and sync ->commit functions are more similar.
v12: A few bugfixes:
- Assign state->state pointers correctly when grabbing state objects -
we need to link them up with the global state.
- Handle a NULL crtc in set_crtc_for_plane to simplify code flow a bit
for the callers of this function.
v13: Review from Sean:
- kerneldoc spelling fixes
- Don't overallocate states->planes.
- Handle NULL crtc in set_crtc_for_connector.
v14: Sprinkle __must_check over all functions which do wait/wound
locking to make sure callers don't forget this. Since I have ;-)
v15: Be more explicit in the kerneldoc when functions can return
-EDEADLK what to do. And that every other -errno is fatal.
v16: Indent with tabs instead of space, spotted by Ander.
v17: Review from Thierry, small kerneldoc and other naming polish.
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Heavily based upon Rob Clark's atomic series.
- Dropped the connector state from the crtc state, instead opting for a
full-blown connector state. The only thing it has is the desired
crtc, but drivers which have connector properties have now a
data-structure to subclass.
- Rename create_state to duplicate_state. Especially for legacy ioctls
we want updates on top of existing state, so we need a way to get at
the current state. We need to be careful to clear the backpointers
to the global state correctly though.
- Drop property values. Drivers with properties simply need to
subclass the datastructures and track the decoded values in there. I
also think that common properties (like rotation) should be decoded
and stored in the core structures.
- Create a new set of ->atomic_set_prop functions, for smoother
transitions from legacy to atomic operations.
- Pass the ->atomic_set_prop ioctl the right structure to avoid
chasing pointers in drivers.
- Drop temporary boolean state for now until we resurrect them with
the helper functions.
- Drop invert_dimensions. For now we don't need any checking since
that's done by the higher-level legacy ioctls. But even then we
should also add rotation/flip tracking to the core drm_crtc_state,
not just whether the dimensions are inverted.
- Track crtc state with an enable/disable. That's equivalent to
mode_valid, but a bit clearer that it means the entire crtc.
The global interface will follow in subsequent patches.
v2: We need to allow drivers to somehow set up the initial state and
clear it on resume. So add a plane->reset callback for that. Helpers
will be provided with default behaviour for all these.
v3: Split out the plane->reset into a separate patch.
v4: Improve kerneldoc in drm_crtc.h
v5: Remove unused inline functions for handling state objects, those
callbacks are now mandatory for full atomic support.
v6: Fix commit message nit Sean noticed.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
I've tried to cc all the people who have recently added new stuff
but forgotten to update documentation.
I've also decided not to bother documenting the massive property list
in struct drm_mode_config. If that beast keeps on growing we might want
to extract it into a separate structure which we won't document.
Cc: Thomas Wood <thomas.wood@intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
While writing atomic docs I've noticed that I don't get any errors
for my screw-ups in drm_crtc.h. Fix this immediately.
This just does the bare minimum to get starts, lots of stuff isn't
properly documented yet unfortunately.
v2: Fix adjacent spelling error Sean noticed.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Just a bit of OCD cleanup on headers - this function isn't the core
interface any more but just a helper for drivers who haven't yet
transitioned to universal planes. Put the declaration at the right
spot and sprinkle necessary #includes over all drivers.
Maybe this helps to encourage driver maintainers to do the switch.
v2: Fix #include ordering for tegra, reported by 0-day builder.
v3: Include required headers, reported by Thierry.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Thierry Reding <treding@nvidia.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Including headers somewhere else but at the top is ugly, deprecated and
was used in early days only to speed up compile-times. Those days are
over. Make headers independent and then move the inclusions to the top.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
drm-intel-next-2014-08-22:
- basic code for execlist, which is the fancy new cmd submission on gen8. Still
disabled by default (Ben, Oscar Mateo, Thomas Daniel et al)
- remove the useless usage of console_lock for I915_FBDEV=n (Chris)
- clean up relations between ctx and ppgtt
- clean up ppgtt lifetime handling (Michel Thierry)
- various cursor code improvements from Ville
- execbuffer code cleanups and secure batch fixes (Chris)
- prep work for dev -> dev_priv transition (Chris)
- some of the prep patches for the seqno -> request object transition (Chris)
- various small improvements all over
* tag 'drm-intel-next-2014-09-01' of git://anongit.freedesktop.org/drm-intel: (86 commits)
drm/i915: fix suspend/resume for GENs w/o runtime PM support
drm/i915: Update DRIVER_DATE to 20140822
drm: fix plane rotation when restoring fbdev configuration
drm/i915/bdw: Disable execlists by default
drm/i915/bdw: Enable Logical Ring Contexts (hence, Execlists)
drm/i915/bdw: Document Logical Rings, LR contexts and Execlists
drm/i915/bdw: Print context state in debugfs
drm/i915/bdw: Display context backing obj & ringbuffer info in debugfs
drm/i915/bdw: Display execlists info in debugfs
drm/i915/bdw: Disable semaphores for Execlists
drm/i915/bdw: Make sure gpu reset still works with Execlists
drm/i915/bdw: Don't write PDP in the legacy way when using LRCs
drm/i915: Track cursor changes as frontbuffer tracking flushes
drm/i915/bdw: Help out the ctx switch interrupt handler
drm/i915/bdw: Avoid non-lite-restore preemptions
drm/i915/bdw: Handle context switch events
drm/i915/bdw: Two-stage execlist submit process
drm/i915/bdw: Write the tail pointer, LRC style
drm/i915/bdw: Implement context switching (somewhat)
drm/i915/bdw: Emission of requests with logical rings
...
Conflicts:
drivers/gpu/drm/i915/i915_drv.c
- Setting dp M2/N2 values plus state checker support (Vandana Kannan)
- chv power well support (Ville)
- DP training pattern 3 support for chv (Ville)
- cleanup of the hsw/bdw ddi pll code, prep work for skl (Damien)
- dsi video burst mode support (Shobhit)
- piles of other chv fixes all over (Ville et. al.)
- cleanup of the ddi translation tables setup code (Damien)
- 180 deg rotation support (Ville & Sonika Jindal)
* tag 'drm-intel-next-2014-08-08' of git://anongit.freedesktop.org/drm-intel: (59 commits)
drm/i915: Update DRIVER_DATE to 20140808
drm/i915: No busy-loop wait_for in the ring init code
drm/i915: Add sprite watermark programming for VLV and CHV
drm/i915: Round-up clock and limit drain latency
drm/i915: Generalize drain latency computation
drm/i915: Free pending page flip events at .preclose()
drm/i915: clean up PPGTT checking logic
drm/i915: Polish the chv cmnlane resrt macros
drm/i915: Hack to tie both common lanes together on chv
drm/i915: Add cherryview_update_wm()
drm/i915: Update DDL only for current CRTC
drm/i915: Parametrize VLV_DDL registers
drm/i915: Fill out the FWx watermark register defines
drm: Resetting rotation property
drm/i915: Add rotation property for sprites
drm: Add rotation_property to mode_config
drm/i915: Make intel_plane_restore() return an error
drm/i915: Add 180 degree sprite rotation support
drm/i915: Introduce a for_each_intel_encoder() macro
drm/i915: Demote the DRRS messages to debug messages
...
Make sure plane rotation is reset correctly when restoring the fbdev
configuration by using drm_mode_plane_set_obj_prop which calls the
driver's set_property callback.
The rotation reset feature was introduced in commit 9783de2 (drm:
Resetting rotation property) and the callback issue was originally
addressed in a previous version of the patch, but the fix was not
present in the final version.
v2: Fix documentation warning
Add some more details to the commit message (Daniel Vetter)
Testcase: igt/kms_rotation_crc
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82236
Cc: Sonika Jindal <sonika.jindal@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thomas Wood <thomas.wood@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In general having this can't hurt, and the atomic helpers will need
it to be able to reset the state objects properly. The overall idea
is to reset in the order pixels flow, so planes -> crtcs ->
encoders -> connectors.
v2: Squash in fixup from Ville to correctly deference struct drm_plane
instead of drm_crtc when walking the plane list. Fixes an oops in
driver init and resume.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Atomic implemenations for legacy ioctls must be able to drop locks.
Which doesn't cause havoc since we only do that while constructing
the new state, so no driver or hardware state change has happened.
The only troubling bit is the fb refcounting the core does - if
someone else has snuck in then it might potentially unref an
outdated framebuffer. To fix that move the old_fb temporary storage
into struct drm_plane for all ioctls, so that the atomic helpers can
update it.
v2: Fix up the error case handling as suggested by Matt Roper and just
grab locks uncoditionally - there's no point in optimizing the locking
for when userspace gets it wrong.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
So drivers using the atomic interfaces expect that they can acquire
additional locks internal to the driver as-needed. Examples would be
locks to protect shared state like shared display PLLs.
Unfortunately the legacy ioctls assume that all locking is fully done
by the drm core. Now for those paths which grab all locks we already
have to keep around an acquire context in dev->mode_config. Helper
functions that implement legacy interfaces in terms of atomic support
can therefore grab this acquire contexts and reuse it.
The only interfaces left are the cursor and pageflip ioctls. So add
functions to grab the crtc lock these need using an acquire context
and preserve it for atomic drivers to reuse.
v2:
- Fixup comments&kerneldoc.
- Drop the WARNING from modeset_lock_all_crtcs since that can be used
in legacy paths with crtc locking.
v3: Fix a type on the kerneldoc Dave spotted.
Cc: Dave Airlie <airlied@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Somehow we've forgotten about this little bit of OCD.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In the atomic state we'll have an array of states for crtcs, planes
and connectors and need to be able to at them by their index. We
already have a drm_crtc_index function so add the missing ones for
planes and connectors.
If it later on turns out that the list walking is too expensive we can
add the index to the relevant modeset objects.
Rob Clark doesn't like the loops too much, but we can always add an
obj->idx parameter later on. And for now reiterating is actually safer
since nowadays we have hotpluggable connectors (thanks to DP MST).
v2: Fix embarrassing copypasta fail in kerneldoc and header
declarations, spotted by Matt Roper.
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
i915.ko has a custom fbdev initialisation routine that aims to preserve
the current mode set by the BIOS, unless overruled by the user. The
user's wishes are determined by what, if any, mode is specified on the
command line (via the video= parameter). However, that command line mode
is first parsed by drm_fb_helper_initial_config() which is called after
i915.ko's custom initial_config() as a fallback method. So in order for
us to honour it, we need to move the cmdline parser earlier. If we
perform the connector cmdline parsing as soon as we initialise the
connector, that cmdline mode and forced status is then available even if
the fbdev helper is not compiled in or never called.
We also then expose the cmdline user mode in the connector mode lists.
v2: Rebase after connector->name upheaval.
v3: Adapt mga200 to look for the cmdline mode in the new place. Nicely
simplifies things while at that.
v4: Fix checkpatch.
v5: Select FB_CMDLINE to adapt to the changed fbdev patch.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73154
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v2)
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v2)
Cc: dri-devel@lists.freedesktop.org
Cc: Julia Lemire <jlemire@matrox.com>
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Pull in drm-next with Dave's DP MST support so that I can merge some
conflicting patches which also touch the driver load sequencing around
interrupt handling.
Conflicts:
drivers/gpu/drm/i915/intel_display.c
drivers/gpu/drm/i915/intel_dp.c
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Added a property to enable user space to set aspect ratio.
This patch contains declaration of the property and code to create the
property.
v2: Thierry's review comments.
- Made aspect ratio enum generic instead of HDMI/CEA specfic
- Removed usage of temporary aspect_ratio variable
v3: Thierry's review comments.
- Fixed indentation
v4: Thierry's review comments.
- Return ENOMEM when property creation fails
Signed-off-by: Vandana Kannan <vandana.kannan@intel.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Merge armada changes, I've confirmed the componenet changes are same as in Greg's tree.
* 'drm-armada-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
drm/armada: register crtc with port
drm/armada: permit CRTCs to be registered as separate devices
dt-bindings: add Marvell Dove LCD controller documentation
drm/armada: update Armada 510 (Dove) to use "ext_ref_clk1" as the clock
drm/armada: convert to componentized support
drm: add of_graph endpoint helper to find possible CRTCs
component: fix bug with legacy API
drm/armada: make variant a CRTC thing
drm/armada: move variant initialisation to CRTC init
drm/armada: use number of CRTCs registered
drm/armada: move IRQ handling into CRTC
component: add support for component match array
component: ignore multiple additions of the same component
component: fix missed cleanup in case of devres failure
drm_rotation_simplify() can be used to eliminate unsupported rotation
flags. It will check if any unsupported flags are present, and if so
it will modify the rotation to an alternate form by adding 180 degrees
to rotation angle, and flipping the reflect x and y bits. The hope is
that this identity transform will eliminate the unsupported flags.
Of course that might not result in any more supported rotation, so
the caller is still responsible for checking the result afterwards.
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Acked-by: Dave Airlie <airlied@linux.ie>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add a function to create a standards compliant rotation property.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Acked-by: Dave Airlie <airlied@linux.ie>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Make drm_property_create_bitmask() a bit more generic by allowing the
caller to specify which bits are in fact supported. This allows multiple
callers to use the same enum list, but still create different versions
of the same property with different list of supported bits.
v2: Populate values[] array as non-sparse
Make supported_bits 64bit
Fix up omapdrm call site (Rob)
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Sagar Kamble <sagar.a.kamble@intel.com>
Acked-by: Dave Airlie <airlied@linux.ie>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The rotation property stuff should be standardized among all drivers.
Move the bits to drm_crtc.h from omap_drv.h.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Acked-by: Dave Airlie <airlied@linux.ie>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add a helper to allow encoders to find their possible CRTCs from the
OF graph without having to re-implement this functionality. We add a
device_node to drm_crtc which corresponds with the port node in the
DT description of the CRTC device.
We can then scan the DRM device list for CRTCs to find their index,
matching the appropriate CRTC using the port device_node, thus building
up the possible CRTC mask.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
- Accurate frontbuffer tracking and frontbuffer rendering invalidate, flush and
flip events. This is prep work for proper PSR support and should also be
useful for DRRS&fbc.
- Runtime suspend hardware on system suspend to support the new SOix sleep
states, from Jesse.
- PSR updates for broadwell (Rodrigo)
- Universal plane support for cursors (Matt Roper), including core drm patches.
- Prefault gtt mappings (Chris)
- baytrail write-enable pte bit support (Akash Goel)
- mmio based flips (Sourab Gupta) instead of blitter ring flips
- interrupt handling race fixes (Oscar Mateo)
And old, not yet merged features from the previous round:
- rps/turbo support for chv (Deepak)
- some other straggling chv patches (Ville)
- proper universal plane conversion for the primary plane (Matt Roper)
- ppgtt on vlv from Jesse
- pile of cleanups, little fixes for insane corner cases and improved debug
support all over
* tag 'drm-intel-next-2014-06-20' of git://anongit.freedesktop.org/drm-intel: (99 commits)
drm/i915: Update DRIVER_DATE to 20140620
drivers/i915: Fix unnoticed failure of init_ring_common()
drm/i915: Track frontbuffer invalidation/flushing
drm/i915: Use new frontbuffer bits to increase pll clock
drm/i915: don't take runtime PM reference around freeze/thaw
drm/i915: use runtime irq suspend/resume in freeze/thaw
drm/i915: Properly track domain of the fbcon fb
drm/i915: Print obj->frontbuffer_bits in debugfs output
drm/i915: Introduce accurate frontbuffer tracking
drm/i915: Drop schedule_back from psr_exit
drm/i915: Ditch intel_edp_psr_update
drm/i915: Drop unecessary complexity from psr_inactivate
drm/i915: Remove ctx->last_ring
drm/i915/chv: Ack interrupts before handling them (CHV)
drm/i915/bdw: Ack interrupts before handling them (GEN8)
drm/i915/vlv: Ack interrupts before handling them (VLV)
drm/i915: Ack interrupts before handling them (GEN5 - GEN7)
drm/i915: Don't BUG_ON in i915_gem_obj_offset
drm/i915: Grab dev->struct_mutex in i915_gem_pageflip_info
drm/i915: Add some L3 registers to the parser whitelist
...
Conflicts:
drivers/gpu/drm/i915/i915_drv.c
This property will be used by the MST code to provide userspace
with a path to parse so it can recognise connectors around hotplugs.
Reviewed-by: Todd Previte <tprevite@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This can be called to update things after dynamic connectors/encoders
are created/deleted.
Reviewed-by: Todd Previte <tprevite@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Add a file to debugfs for each connector to allow the EDID to be
overridden.
v2: Copy ubuf before accessing it and reject invalid length data. (David
Herrmann)
Ensure override_edid is reset when a new EDID value is written.
(David Herrmann)
Fix the debugfs file permissions. (David Herrmann)
Signed-off-by: Thomas Wood <thomas.wood@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add a file to debugfs for each connector to enable modification of the
"force" connector attribute. This allows connectors to be enabled or
disabled for testing and debugging purposes.
v2: Add stricter value checking and clean up debugfs_entry if file
creation fails in drm_debugfs_connector_add. (David Herrmann)
Signed-off-by: Thomas Wood <thomas.wood@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Introduce generic functions to register and unregister connectors. This
provides a common place to add and remove associated user space
interfaces.
Signed-off-by: Thomas Wood <thomas.wood@intel.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Universal plane support had placeholders for cursor planes, but didn't
actually do anything with them. Save the cursor plane reference inside
the crtc and update the cursor plane parameter from void* to drm_plane.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Pallavi G<pallavi.g@intel.com>
Acked-by: Dave Airlie <airlied@linux.ie>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If drivers support universal planes and have registered a cursor plane
with the DRM core, we should use that universal plane support when
handling legacy cursor ioctls. Drivers that transition to universal
planes won't have to maintain separate legacy ioctl handling; drivers
that don't transition to universal planes will continue to operate
without any change to behavior.
Note that there's a bit of a mismatch between the legacy cursor ioctls
and the universal plane API's --- legacy ioctl's use driver buffer
handles directly whereas the universal plane API takes drm_framebuffers.
Since there's no way to recover the driver handle from a
drm_framebuffer, we can implement legacy ioctl's in terms of universal
plane interfaces, but cannot implement universal plane interfaces in
terms of legacy ioctls. Specifically, there's no way to create a
general cursor helper in the way we previously created a primary plane
helper.
It's important to land this patch before any patches that add universal
cursor support to individual drivers so that drivers don't have to worry
about juggling two different styles of reference counting for cursor
buffers when userspace mixes and matches legacy and universal cursor
calls. With this patch, a driver that switches to universal cursor
support may assume that all cursor buffers are wrapped in a
drm_framebuffer and can rely on framebuffer reference counting for all
cursor operations.
v4:
- Add comments pointing out setplane_internal's reference-eating
semantics.
v3:
- Drop drm_mode_rmfb() call that is no longer needed now that we're
using setplane_internal(), which takes care of deref'ing the
appropriate framebuffer.
v2:
- Use new add_framebuffer_internal() function to create framebuffer
rather than trying to call directly into the ioctl interface and
look up the handle returned.
- Use new setplane_internal() function to update the cursor plane
rather than calling through the ioctl interface. Note that since
we're no longer looking up an fb_id, no extra reference will be
taken here.
- Grab extra reference to fb under lock in !BO case to avoid issues
where racing userspace could cause the fb to be destroyed out from
under us after we grab the fb pointer.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Pallavi G<pallavi.g@intel.com>
Acked-by: Dave Airlie <airlied@linux.ie>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
HDMI deep color setup must know which modes are supported if
it needs to degrade gracefully, as only 12 bpc / dc_36 is
guaranteed, but 10 bpc / dc_30 is optional. The maximum bpc
is not sufficient for this.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie
Rob Clark
Daniel Vetter
Thierry Reding
David Herrmann
Thomas Wood
Sonika Jindal
Chris Wilson
Vandana Kannan
Ville Syrjälä
Russell King
Matt Roper
Mario Kleiner