[ Upstream commit 083a25b18d ]
The hw->formats may be set by snd_dmaengine_pcm_refine_runtime_hwparams()
in component's startup()/open(), but soc_pcm_hw_init() will init
hw->formats in dpcm_runtime_setup_fe() after component's startup()/open(),
which causes the valuable hw->formats to be cleared.
So need to store the hw->formats before initialization, then restore
it after initialization.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1678346017-3660-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3c728b1bc5 ]
Same quirks as the 'Bishop County' NUC M15, except the rt711 is in the
'JD2 100K' jack detection mode.
Link: https://github.com/thesofproject/linux/issues/4088
Signed-off-by: Eugene Huang <eugene.huang99@gmail.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230314090553.498664-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1b50f956c8 upstream.
We used to access the dtb via its linear mapping address but now that the
dtb early mapping was moved in the fixmap region, we can keep using this
address since it is present in swapper_pg_dir, and remove the dtb
relocation.
Note that the relocation was wrong anyway since early_memremap() is
restricted to 256K whereas the maximum fdt size is 2MB.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230329081932.79831-4-alexghiti@rivosinc.com
Cc: stable@vger.kernel.org # 5.15.x
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f158162607 upstream.
early_init_dt_verify() is already called in parse_dtb() and since the dtb
address does not change anymore (it is now in the fixmap region), no need
to reset initial_boot_params by calling early_init_dt_verify() again.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230329081932.79831-3-alexghiti@rivosinc.com
Cc: stable@vger.kernel.org # 5.15.x
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ef69d2559f upstream.
riscv establishes 2 virtual mappings:
- early_pg_dir maps the kernel which allows to discover the system
memory
- swapper_pg_dir installs the final mapping (linear mapping included)
We used to map the dtb in early_pg_dir using DTB_EARLY_BASE_VA, and this
mapping was not carried over in swapper_pg_dir. It happens that
early_init_fdt_scan_reserved_mem() must be called before swapper_pg_dir is
setup otherwise we could allocate reserved memory defined in the dtb.
And this function initializes reserved_mem variable with addresses that
lie in the early_pg_dir dtb mapping: when those addresses are reused
with swapper_pg_dir, this mapping does not exist and then we trap.
The previous "fix" was incorrect as early_init_fdt_scan_reserved_mem()
must be called before swapper_pg_dir is set up otherwise we could
allocate in reserved memory defined in the dtb.
So move the dtb mapping in the fixmap region which is established in
early_pg_dir and handed over to swapper_pg_dir.
This patch had to be backported because:
- the documentation for sv57 is not present here (as sv48/57 are not
present)
- handling of sv48/57 is not needed (as not present)
Fixes: 922b0375fc ("riscv: Fix memblock reservation for device tree blob")
Fixes: 8f3a2b4a96 ("RISC-V: Move DT mapping outof fixmap")
Fixes: 50e63dd8ed ("riscv: fix reserved memory setup")
Reported-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/all/f8e67f82-103d-156c-deb0-d6d6e2756f5e@microchip.com/
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230329081932.79831-2-alexghiti@rivosinc.com
Cc: stable@vger.kernel.org # 5.15.x
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "Fixes" commit mentioned below adds new MIBs counters to track some
particular cases that have been fixed by its parent commit 150d1e06c4
("mptcp: fix race in incoming ADD_ADDR option processing").
Unfortunately, one of the new MIB counter (AddAddrDrop) shares the same
prefix as an older one (AddAddr). This breaks one selftest because it
was doing a grep on "AddAddr" and it now gets 2 counters instead of 1.
This issue has been fixed upstream in a commit that was part of the same
set but not backported to v5.15, see commit 6ef84b1517 ("selftests:
mptcp: more robust signal race test"). It has not been backported
because it was fixing multiple things, some where for >v5.15.
This patch then simply extracts the only bit needed for v5.15. Now the
test passes when validating the last stable v5.15 kernel.
Fixes: f25ae162f4 ("mptcp: add mibs counter for ignored incoming options")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e2f06aa885 upstream.
Don't require the use of dynamic debug (or modification of the kernel to
add a #define DEBUG to the top of this file) to get the printk message
about driver probe timing. This printk is only emitted when
initcall_debug is enabled on the kernel commandline, and it isn't
immediately obvious that you have to do something else to debug boot
timing issues related to driver probe. Add a comment too so it doesn't
get converted back to pr_debug().
Fixes: eb7fbc9fb1 ("driver core: Add missing '\n' in log messages")
Cc: stable <stable@kernel.org>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Brian Norris <briannorris@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20230412225842.3196599-1-swboyd@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 25c150ac10 upstream.
Previously, capability was checked using capable(), which verified that the
caller of the ioctl system call had the required capability. In addition,
the result of the check would be stored in the HCI_SOCK_TRUSTED flag,
making it persistent for the socket.
However, malicious programs can abuse this approach by deliberately sharing
an HCI socket with a privileged task. The HCI socket will be marked as
trusted when the privileged task occasionally makes an ioctl call.
This problem can be solved by using sk_capable() to check capability, which
ensures that not only the current task but also the socket opener has the
specified capability, thus reducing the risk of privilege escalation
through the previously identified vulnerability.
Cc: stable@vger.kernel.org
Fixes: f81f5b2db8 ("Bluetooth: Send control open and close messages for HCI raw sockets")
Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a25bc8486f upstream.
The KVM_REG_SIZE() comes from the ioctl and it can be a power of two
between 0-32768 but if it is more than sizeof(long) this will corrupt
memory.
Fixes: 99adb56763 ("KVM: arm/arm64: Add save/restore support for firmware workaround state")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/4efbab8c-640f-43b2-8ac6-6d68e08280fe@kili.mountain
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
[will: kvm_arm_set_fw_reg() lives in psci.c not hypercalls.c]
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 13ec9308a8 upstream.
Read mmu_invalidate_seq before dropping the mmap_lock so that KVM can
detect if the results of vma_lookup() (e.g. vma_shift) become stale
before it acquires kvm->mmu_lock. This fixes a theoretical bug where a
VMA could be changed by userspace after vma_lookup() and before KVM
reads the mmu_invalidate_seq, causing KVM to install page table entries
based on a (possibly) no-longer-valid vma_shift.
Re-order the MMU cache top-up to earlier in user_mem_abort() so that it
is not done after KVM has read mmu_invalidate_seq (i.e. so as to avoid
inducing spurious fault retries).
This bug has existed since KVM/ARM's inception. It's unlikely that any
sane userspace currently modifies VMAs in such a way as to trigger this
race. And even with directed testing I was unable to reproduce it. But a
sufficiently motivated host userspace might be able to exploit this
race.
Fixes: 94f8e6418d ("KVM: ARM: Handle guest faults in KVM")
Cc: stable@vger.kernel.org
Reported-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230313235454.2964067-1-dmatlack@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
[will: Use FSC_PERM instead of ESR_ELx_FSC_PERM. Read 'mmu_notifier_seq'
instead of 'mmu_invalidate_seq'. Fix up function references in comment.]
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 303f8e2d02 upstream.
When running a test program, 'run_one()' checks if the program has the
execution permission and fails if it doesn't. However, it's easy to
mistakenly lose the permissions, as some common tools like 'diff' don't
support the permission change well[1]. Compared to that, making mistakes
in the test program's path would only rare, as those are explicitly listed
in 'TEST_PROGS'. Therefore, it might make more sense to resolve the
situation on our own and run the program.
For this reason, this commit makes the test program runner function still
print the warning message but to try parsing the interpreter of the
program and to explicitly run it with the interpreter, in this case.
[1] https://lore.kernel.org/mm-commits/YRJisBs9AunccCD4@kroah.com/
Link: https://lkml.kernel.org/r/20210810164534.25902-1-sj38.park@gmail.com
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 08d0cc5f34 upstream.
pcie_aspm_pm_state_change() was introduced at the inception of PCIe ASPM
code, but it can cause some issues. For instance, when ASPM config is
changed via sysfs, those changes won't persist across power state change
because pcie_aspm_pm_state_change() overwrites them.
Also, if the driver restores L1SS [1] after system resume, the restored
state will also be overwritten by pcie_aspm_pm_state_change().
Remove pcie_aspm_pm_state_change(). If there's any hardware that really
needs it to function, a quirk can be used instead.
[1] https://lore.kernel.org/linux-pci/20220201123536.12962-1-vidyas@nvidia.com/
Link: https://lore.kernel.org/r/20220509073639.2048236-1-kai.heng.feng@canonical.com
[bhelgaas: remove additional pcie_aspm_pm_state_change() call in
pci_set_low_power_state(), added by
10aa5377fc ("PCI/PM: Split pci_raw_set_power_state()") and moved by
7957d20145 ("PCI/PM: Relocate pci_set_low_power_state()")]
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
[manual backport: pci_set_low_power_state does not exist in v5.15]
Signed-off-by: Mark Hasemeyer <markhas@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5a43001c01 upstream.
It seems there is a misprint in the check of strdup() return code that
can lead to NULL pointer dereference.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 4520c6a49a ("X.509: Add simple ASN.1 grammar compiler")
Signed-off-by: Ekaterina Orlova <vorobushek.ok@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: keyrings@vger.kernel.org
Cc: linux-kbuild@vger.kernel.org
Link: https://lore.kernel.org/r/20230315172130.140-1-vorobushek.ok@gmail.com/
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 86a24e99c9 upstream.
dma_request_slave_channel() may return NULL which will lead to
NULL pointer dereference error in 'tmp_chan->private'.
Correct this behaviour by, first, switching from deprecated function
dma_request_slave_channel() to dma_request_chan(). Secondly, enable
sanity check for the resuling value of dma_request_chan().
Also, fix description that follows the enacted changes and that
concerns the use of dma_request_slave_channel().
Fixes: 706e2c8811 ("ASoC: fsl_asrc_dma: Reuse the dma channel if available in Back-End")
Co-developed-by: Natalia Petrova <n.petrova@fintech.ru>
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20230417133242.53339-1-n.zhandarovich@fintech.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1007843a91 upstream.
syzbot is reporting circular locking dependency which involves
zonelist_update_seq seqlock [1], for this lock is checked by memory
allocation requests which do not need to be retried.
One deadlock scenario is kmalloc(GFP_ATOMIC) from an interrupt handler.
CPU0
----
__build_all_zonelists() {
write_seqlock(&zonelist_update_seq); // makes zonelist_update_seq.seqcount odd
// e.g. timer interrupt handler runs at this moment
some_timer_func() {
kmalloc(GFP_ATOMIC) {
__alloc_pages_slowpath() {
read_seqbegin(&zonelist_update_seq) {
// spins forever because zonelist_update_seq.seqcount is odd
}
}
}
}
// e.g. timer interrupt handler finishes
write_sequnlock(&zonelist_update_seq); // makes zonelist_update_seq.seqcount even
}
This deadlock scenario can be easily eliminated by not calling
read_seqbegin(&zonelist_update_seq) from !__GFP_DIRECT_RECLAIM allocation
requests, for retry is applicable to only __GFP_DIRECT_RECLAIM allocation
requests. But Michal Hocko does not know whether we should go with this
approach.
Another deadlock scenario which syzbot is reporting is a race between
kmalloc(GFP_ATOMIC) from tty_insert_flip_string_and_push_buffer() with
port->lock held and printk() from __build_all_zonelists() with
zonelist_update_seq held.
CPU0 CPU1
---- ----
pty_write() {
tty_insert_flip_string_and_push_buffer() {
__build_all_zonelists() {
write_seqlock(&zonelist_update_seq);
build_zonelists() {
printk() {
vprintk() {
vprintk_default() {
vprintk_emit() {
console_unlock() {
console_flush_all() {
console_emit_next_record() {
con->write() = serial8250_console_write() {
spin_lock_irqsave(&port->lock, flags);
tty_insert_flip_string() {
tty_insert_flip_string_fixed_flag() {
__tty_buffer_request_room() {
tty_buffer_alloc() {
kmalloc(GFP_ATOMIC | __GFP_NOWARN) {
__alloc_pages_slowpath() {
zonelist_iter_begin() {
read_seqbegin(&zonelist_update_seq); // spins forever because zonelist_update_seq.seqcount is odd
spin_lock_irqsave(&port->lock, flags); // spins forever because port->lock is held
}
}
}
}
}
}
}
}
spin_unlock_irqrestore(&port->lock, flags);
// message is printed to console
spin_unlock_irqrestore(&port->lock, flags);
}
}
}
}
}
}
}
}
}
write_sequnlock(&zonelist_update_seq);
}
}
}
This deadlock scenario can be eliminated by
preventing interrupt context from calling kmalloc(GFP_ATOMIC)
and
preventing printk() from calling console_flush_all()
while zonelist_update_seq.seqcount is odd.
Since Petr Mladek thinks that __build_all_zonelists() can become a
candidate for deferring printk() [2], let's address this problem by
disabling local interrupts in order to avoid kmalloc(GFP_ATOMIC)
and
disabling synchronous printk() in order to avoid console_flush_all()
.
As a side effect of minimizing duration of zonelist_update_seq.seqcount
being odd by disabling synchronous printk(), latency at
read_seqbegin(&zonelist_update_seq) for both !__GFP_DIRECT_RECLAIM and
__GFP_DIRECT_RECLAIM allocation requests will be reduced. Although, from
lockdep perspective, not calling read_seqbegin(&zonelist_update_seq) (i.e.
do not record unnecessary locking dependency) from interrupt context is
still preferable, even if we don't allow calling kmalloc(GFP_ATOMIC)
inside
write_seqlock(&zonelist_update_seq)/write_sequnlock(&zonelist_update_seq)
section...
Link: https://lkml.kernel.org/r/8796b95c-3da3-5885-fddd-6ef55f30e4d3@I-love.SAKURA.ne.jp
Fixes: 3d36424b3b ("mm/page_alloc: fix race condition between build_all_zonelists and page allocation")
Link: https://lkml.kernel.org/r/ZCrs+1cDqPWTDFNM@alley [2]
Reported-by: syzbot <syzbot+223c7461c58c58a4cb10@syzkaller.appspotmail.com>
Link: https://syzkaller.appspot.com/bug?extid=223c7461c58c58a4cb10 [1]
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Petr Mladek <pmladek@suse.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Patrick Daly <quic_pdaly@quicinc.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 73a428b37b upstream.
The at91_adc_allocate_trigger() function is supposed to return error
pointers. Returning a NULL will cause an Oops.
Fixes: 5e1a1da0f8 ("iio: adc: at91-sama5d2_adc: add hw trigger and buffer support")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/5d728f9d-31d1-410d-a0b3-df6a63a2c8ba@kili.mountain
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4aa3b75c74 upstream.
The Counter (CNTR) register is 24 bits wide, but we can have an
effective 25-bit count value by setting bit 24 to the XOR of the Borrow
flag and Carry flag. The flags can be read from the FLAG register, but a
race condition exists: the Borrow flag and Carry flag are instantaneous
and could change by the time the count value is read from the CNTR
register.
Since the race condition could result in an incorrect 25-bit count
value, remove support for 25-bit count values from this driver;
hard-coded maximum count values are replaced by a LS7267_CNTR_MAX define
for consistency and clarity.
Fixes: 28e5d3bb03 ("iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8")
Cc: <stable@vger.kernel.org> # 6.1.x
Cc: <stable@vger.kernel.org> # 6.2.x
Link: https://lore.kernel.org/r/20230312231554.134858-1-william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8caa81eb95 upstream.
The driver only supports normal polarity. Complete the implementation of
.get_state() by setting .polarity accordingly.
This fixes a regression that was possible since commit c73a310762
("pwm: Handle .get_state() failures") which stopped to zero-initialize
the state passed to the .get_state() callback. This was reported at
https://forum.odroid.com/viewtopic.php?f=177&t=46360 . While this was an
unintended side effect, the real issue is the driver's callback not
setting the polarity.
There is a complicating fact, that the .apply() callback fakes support
for inversed polarity. This is not (and cannot) be matched by
.get_state(). As fixing this isn't easy, only point it out in a comment
to prevent authors of other drivers from copying that approach.
Fixes: c375bcbaab ("pwm: meson: Read the full hardware state in meson_pwm_get_state()")
Reported-by: Munehisa Kamata <kamatam@amazon.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20230310191405.2606296-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6431b0f6ff upstream.
After commit d38afeec26 ("tcp/udp: Call inet6_destroy_sock()
in IPv6 sk->sk_destruct()."), we call inet6_destroy_sock() in
sk->sk_destruct() by setting inet6_sock_destruct() to it to make
sure we do not leak inet6-specific resources.
SCTP sets its own sk->sk_destruct() in the sctp_init_sock(), and
SCTPv6 socket reuses it as the init function.
To call inet6_sock_destruct() from SCTPv6 sk->sk_destruct(), we
set sctp_v6_destruct_sock() in a new init function.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1651951ebe upstream.
After commit d38afeec26 ("tcp/udp: Call inet6_destroy_sock()
in IPv6 sk->sk_destruct()."), we call inet6_destroy_sock() in
sk->sk_destruct() by setting inet6_sock_destruct() to it to make
sure we do not leak inet6-specific resources.
DCCP sets its own sk->sk_destruct() in the dccp_init_sock(), and
DCCPv6 socket shares it by calling the same init function via
dccp_v6_init_sock().
To call inet6_sock_destruct() from DCCPv6 sk->sk_destruct(), we
export it and set dccp_v6_sk_destruct() in the init function.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b5fc29233d upstream.
After commit d38afeec26 ("tcp/udp: Call inet6_destroy_sock()
in IPv6 sk->sk_destruct()."), we call inet6_destroy_sock() in
sk->sk_destruct() by setting inet6_sock_destruct() to it to make
sure we do not leak inet6-specific resources.
Now we can remove unnecessary inet6_destroy_sock() calls in
sk->sk_prot->destroy().
DCCP and SCTP have their own sk->sk_destruct() function, so we
change them separately in the following patches.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d38afeec26 upstream.
Originally, inet6_sk(sk)->XXX were changed under lock_sock(), so we were
able to clean them up by calling inet6_destroy_sock() during the IPv6 ->
IPv4 conversion by IPV6_ADDRFORM. However, commit 03485f2adc ("udpv6:
Add lockless sendmsg() support") added a lockless memory allocation path,
which could cause a memory leak:
setsockopt(IPV6_ADDRFORM) sendmsg()
+-----------------------+ +-------+
- do_ipv6_setsockopt(sk, ...) - udpv6_sendmsg(sk, ...)
- sockopt_lock_sock(sk) ^._ called via udpv6_prot
- lock_sock(sk) before WRITE_ONCE()
- WRITE_ONCE(sk->sk_prot, &tcp_prot)
- inet6_destroy_sock() - if (!corkreq)
- sockopt_release_sock(sk) - ip6_make_skb(sk, ...)
- release_sock(sk) ^._ lockless fast path for
the non-corking case
- __ip6_append_data(sk, ...)
- ipv6_local_rxpmtu(sk, ...)
- xchg(&np->rxpmtu, skb)
^._ rxpmtu is never freed.
- goto out_no_dst;
- lock_sock(sk)
For now, rxpmtu is only the case, but not to miss the future change
and a similar bug fixed in commit e27326009a ("net: ping6: Fix
memleak in ipv6_renew_options()."), let's set a new function to IPv6
sk->sk_destruct() and call inet6_cleanup_sock() there. Since the
conversion does not change sk->sk_destruct(), we can guarantee that
we can clean up IPv6 resources finally.
We can now remove all inet6_destroy_sock() calls from IPv6 protocol
specific ->destroy() functions, but such changes are invasive to
backport. So they can be posted as a follow-up later for net-next.
Fixes: 03485f2adc ("udpv6: Add lockless sendmsg() support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 21985f4337 upstream.
Commit 4b340ae20d ("IPv6: Complete IPV6_DONTFRAG support") forgot
to add a change to free inet6_sk(sk)->rxpmtu while converting an IPv6
socket into IPv4 with IPV6_ADDRFORM. After conversion, sk_prot is
changed to udp_prot and ->destroy() never cleans it up, resulting in
a memory leak.
This is due to the discrepancy between inet6_destroy_sock() and
IPV6_ADDRFORM, so let's call inet6_destroy_sock() from IPV6_ADDRFORM
to remove the difference.
However, this is not enough for now because rxpmtu can be changed
without lock_sock() after commit 03485f2adc ("udpv6: Add lockless
sendmsg() support"). We will fix this case in the following patch.
Note we will rename inet6_destroy_sock() to inet6_cleanup_sock() and
remove unnecessary inet6_destroy_sock() calls in sk_prot->destroy()
in the future.
Fixes: 4b340ae20d ("IPv6: Complete IPV6_DONTFRAG support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2fdbb8dd01 upstream.
fuse_finish_open() will be called with FUSE_NOWRITE set in case of atomic
O_TRUNC open(), so commit 76224355db ("fuse: truncate pagecache on
atomic_o_trunc") replaced invalidate_inode_pages2() by truncate_pagecache()
in such a case to avoid the A-A deadlock. However, we found another A-B-B-A
deadlock related to the case above, which will cause the xfstests
generic/464 testcase hung in our virtio-fs test environment.
For example, consider two processes concurrently open one same file, one
with O_TRUNC and another without O_TRUNC. The deadlock case is described
below, if open(O_TRUNC) is already set_nowrite(acquired A), and is trying
to lock a page (acquiring B), open() could have held the page lock
(acquired B), and waiting on the page writeback (acquiring A). This would
lead to deadlocks.
open(O_TRUNC)
----------------------------------------------------------------
fuse_open_common
inode_lock [C acquire]
fuse_set_nowrite [A acquire]
fuse_finish_open
truncate_pagecache
lock_page [B acquire]
truncate_inode_page
unlock_page [B release]
fuse_release_nowrite [A release]
inode_unlock [C release]
----------------------------------------------------------------
open()
----------------------------------------------------------------
fuse_open_common
fuse_finish_open
invalidate_inode_pages2
lock_page [B acquire]
fuse_launder_page
fuse_wait_on_page_writeback [A acquire & release]
unlock_page [B release]
----------------------------------------------------------------
Besides this case, all calls of invalidate_inode_pages2() and
invalidate_inode_pages2_range() in fuse code also can deadlock with
open(O_TRUNC).
Fix by moving the truncate_pagecache() call outside the nowrite protected
region. The nowrite protection is only for delayed writeback
(writeback_cache) case, where inode lock does not protect against
truncation racing with writes on the server. Write syscalls racing with
page cache truncation still get the inode lock protection.
This patch also changes the order of filemap_invalidate_lock()
vs. fuse_set_nowrite() in fuse_open_common(). This new order matches the
order found in fuse_file_fallocate() and fuse_do_setattr().
Reported-by: Jiachen Zhang <zhangjiachen.jaycee@bytedance.com>
Tested-by: Jiachen Zhang <zhangjiachen.jaycee@bytedance.com>
Fixes: e4648309b8 ("fuse: truncate pending writes on O_TRUNC")
Cc: <stable@vger.kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Yang Bo <yb203166@antfin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ccc031e26a upstream.
The previous commit df8629af29 ("fuse: always revalidate if exclusive
create") ensures that the dentries are revalidated on O_EXCL creates. This
commit complements it by also performing revalidation for rename target
dentries. Otherwise, a rename target file that only exists in kernel
dentry cache but not in the filesystem will result in EEXIST if
RENAME_NOREPLACE flag is used.
Signed-off-by: Jiachen Zhang <zhangjiachen.jaycee@bytedance.com>
Signed-off-by: Zhang Tianci <zhangtianci.1997@bytedance.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Yang Bo <yb203166@antfin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 484ce65715 upstream.
A READ request returning a short count is taken as indication of EOF, and
the cached file size is modified accordingly.
Fix the attribute version checking to allow for changes to fc->attr_version
on other inodes.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Yang Bo <yb203166@antfin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d83806c4c0 upstream.
Since 32ef9e5054, -Wa,-gdwarf-2 is no longer used in KBUILD_AFLAGS.
Instead, it includes -g, the appropriate -gdwarf-* flag, and also the
-Wa versions of both of those if building with Clang and GNU as. As a
result, debug info was being generated for the purgatory objects, even
though the intention was that it not be.
Fixes: 32ef9e5054 ("Makefile.debug: re-enable debug info for .S files")
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Cc: stable@vger.kernel.org
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In upstream commit 77e52ae354 ("futex: Move to kernel/futex/") the
futex code from kernel/futex.c was moved into kernel/futex/core.c in
preparation of the split-up of the implementation in various files.
Point kernel-doc references to the new files as otherwise the
documentation shows errors on build:
[...]
Error: Cannot open file ./kernel/futex.c
Error: Cannot open file ./kernel/futex.c
[...]
WARNING: kernel-doc './scripts/kernel-doc -rst -enable-lineno -sphinx-version 3.4.3 -internal ./kernel/futex.c' failed with return code 2
There is no direct upstream commit for this change. It is made in
analogy to commit bc67f1c454 ("docs: futex: Fix kernel-doc
references") applied as consequence of the restructuring of the futex
code.
Fixes: 77e52ae354 ("futex: Move to kernel/futex/")
Signed-off-by: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6dcbd0a69c upstream.
MIPS's exit sections are discarded at runtime as well.
Fixes link error:
`.exit.text' referenced in section `__jump_table' of fs/fuse/inode.o:
defined in discarded section `.exit.text' of fs/fuse/inode.o
Fixes: 99cb0d917f ("arch: fix broken BuildID for arm64 and riscv")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit da07d2f9c1 upstream.
Traversing the Perf Domains requires rcu_read_lock() to be held and is
conditional on sched_energy_enabled(). Ensure right protections applied.
Also skip capacity inversion detection for our own pd; which was an
error.
Fixes: 44c7b80bff ("sched/fair: Detect capacity inversion")
Reported-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230112122708.330667-3-qyousef@layalina.io
(cherry picked from commit da07d2f9c1)
Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aa69c36f31 upstream.
We do consider thermal pressure in util_fits_cpu() for uclamp_min only.
With the exception of the biggest cores which by definition are the max
performance point of the system and all tasks by definition should fit.
Even under thermal pressure, the capacity of the biggest CPU is the
highest in the system and should still fit every task. Except when it
reaches capacity inversion point, then this is no longer true.
We can handle this by using the inverted capacity as capacity_orig in
util_fits_cpu(). Which not only addresses the problem above, but also
ensure uclamp_max now considers the inverted capacity. Force fitting
a task when a CPU is in this adverse state will contribute to making the
thermal throttling last longer.
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220804143609.515789-10-qais.yousef@arm.com
(cherry picked from commit aa69c36f31)
Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 44c7b80bff upstream.
Check each performance domain to see if thermal pressure is causing its
capacity to be lower than another performance domain.
We assume that each performance domain has CPUs with the same
capacities, which is similar to an assumption made in energy_model.c
We also assume that thermal pressure impacts all CPUs in a performance
domain equally.
If there're multiple performance domains with the same capacity_orig, we
will trigger a capacity inversion if the domain is under thermal
pressure.
The new cpu_in_capacity_inversion() should help users to know when
information about capacity_orig are not reliable and can opt in to use
the inverted capacity as the 'actual' capacity_orig.
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220804143609.515789-9-qais.yousef@arm.com
(cherry picked from commit 44c7b80bff)
[fix trivial conflict in kernel/sched/sched.h due to code shuffling]
Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d81304bc61 upstream.
If the utilization of the woken up task is 0, we skip the energy
calculation because it has no impact.
But if the task is boosted (uclamp_min != 0) will have an impact on task
placement and frequency selection. Only skip if the util is truly
0 after applying uclamp values.
Change uclamp_task_cpu() signature to avoid unnecessary additional calls
to uclamp_eff_get(). feec() is the only user now.
Fixes: 732cd75b8c ("sched/fair: Select an energy-efficient CPU on task wake-up")
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220804143609.515789-8-qais.yousef@arm.com
(cherry picked from commit d81304bc61)
Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c56ab1b350 upstream.
So that it is now uclamp aware.
This fixes a major problem of busy tasks capped with UCLAMP_MAX keeping
the system in overutilized state which disables EAS and leads to wasting
energy in the long run.
Without this patch running a busy background activity like JIT
compilation on Pixel 6 causes the system to be in overutilized state
74.5% of the time.
With this patch this goes down to 9.79%.
It also fixes another problem when long running tasks that have their
UCLAMP_MIN changed while running such that they need to upmigrate to
honour the new UCLAMP_MIN value. The upmigration doesn't get triggered
because overutilized state never gets set in this state, hence misfit
migration never happens at tick in this case until the task wakes up
again.
Fixes: af24bde8df ("sched/uclamp: Add uclamp support to energy_compute()")
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220804143609.515789-7-qais.yousef@arm.com
(cherry picked from commit c56ab1b350)
[Fixed trivial conflict in cpu_overutilized() - use cpu_util() instead
of cpu_util_cfs()]
Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 244226035a upstream.
As reported by Yun Hsiang [1], if a task has its uclamp_min >= 0.8 * 1024,
it'll always pick the previous CPU because fits_capacity() will always
return false in this case.
The new util_fits_cpu() logic should handle this correctly for us beside
more corner cases where similar failures could occur, like when using
UCLAMP_MAX.
We open code uclamp_rq_util_with() except for the clamp() part,
util_fits_cpu() needs the 'raw' values to be passed to it.
Also introduce uclamp_rq_{set, get}() shorthand accessors to get uclamp
value for the rq. Makes the code more readable and ensures the right
rules (use READ_ONCE/WRITE_ONCE) are respected transparently.
[1] https://lists.linaro.org/pipermail/eas-dev/2020-July/001488.html
Fixes: 1d42509e47 ("sched/fair: Make EAS wakeup placement consider uclamp restrictions")
Reported-by: Yun Hsiang <hsiang023167@gmail.com>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220804143609.515789-4-qais.yousef@arm.com
(cherry picked from commit 244226035a)
[Conflict in kernel/sched/fair.c mainly due to new automatic variables
being added on master vs 5.15]
Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4d73ba5fa7 upstream.
A bug was reported by Yuanxi Liu where allocating 1G pages at runtime is
taking an excessive amount of time for large amounts of memory. Further
testing allocating huge pages that the cost is linear i.e. if allocating
1G pages in batches of 10 then the time to allocate nr_hugepages from
10->20->30->etc increases linearly even though 10 pages are allocated at
each step. Profiles indicated that much of the time is spent checking the
validity within already existing huge pages and then attempting a
migration that fails after isolating the range, draining pages and a whole
lot of other useless work.
Commit eb14d4eefd ("mm,page_alloc: drop unnecessary checks from
pfn_range_valid_contig") removed two checks, one which ignored huge pages
for contiguous allocations as huge pages can sometimes migrate. While
there may be value on migrating a 2M page to satisfy a 1G allocation, it's
potentially expensive if the 1G allocation fails and it's pointless to try
moving a 1G page for a new 1G allocation or scan the tail pages for valid
PFNs.
Reintroduce the PageHuge check and assume any contiguous region with
hugetlbfs pages is unsuitable for a new 1G allocation.
The hpagealloc test allocates huge pages in batches and reports the
average latency per page over time. This test happens just after boot
when fragmentation is not an issue. Units are in milliseconds.
hpagealloc
6.3.0-rc6 6.3.0-rc6 6.3.0-rc6
vanilla hugeallocrevert-v1r1 hugeallocsimple-v1r2
Min Latency 26.42 ( 0.00%) 5.07 ( 80.82%) 18.94 ( 28.30%)
1st-qrtle Latency 356.61 ( 0.00%) 5.34 ( 98.50%) 19.85 ( 94.43%)
2nd-qrtle Latency 697.26 ( 0.00%) 5.47 ( 99.22%) 20.44 ( 97.07%)
3rd-qrtle Latency 972.94 ( 0.00%) 5.50 ( 99.43%) 20.81 ( 97.86%)
Max-1 Latency 26.42 ( 0.00%) 5.07 ( 80.82%) 18.94 ( 28.30%)
Max-5 Latency 82.14 ( 0.00%) 5.11 ( 93.78%) 19.31 ( 76.49%)
Max-10 Latency 150.54 ( 0.00%) 5.20 ( 96.55%) 19.43 ( 87.09%)
Max-90 Latency 1164.45 ( 0.00%) 5.53 ( 99.52%) 20.97 ( 98.20%)
Max-95 Latency 1223.06 ( 0.00%) 5.55 ( 99.55%) 21.06 ( 98.28%)
Max-99 Latency 1278.67 ( 0.00%) 5.57 ( 99.56%) 22.56 ( 98.24%)
Max Latency 1310.90 ( 0.00%) 8.06 ( 99.39%) 26.62 ( 97.97%)
Amean Latency 678.36 ( 0.00%) 5.44 * 99.20%* 20.44 * 96.99%*
6.3.0-rc6 6.3.0-rc6 6.3.0-rc6
vanilla revert-v1 hugeallocfix-v2
Duration User 0.28 0.27 0.30
Duration System 808.66 17.77 35.99
Duration Elapsed 830.87 18.08 36.33
The vanilla kernel is poor, taking up to 1.3 second to allocate a huge
page and almost 10 minutes in total to run the test. Reverting the
problematic commit reduces it to 8ms at worst and the patch takes 26ms.
This patch fixes the main issue with skipping huge pages but leaves the
page_count() out because a page with an elevated count potentially can
migrate.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=217022
Link: https://lkml.kernel.org/r/20230414141429.pwgieuwluxwez3rj@techsingularity.net
Fixes: eb14d4eefd ("mm,page_alloc: drop unnecessary checks from pfn_range_valid_contig")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: Yuanxi Liu <y.liu@naruida.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dd47ac428c upstream.
Khugepaged collapse an anonymous thp in two rounds of scans. The 2nd
round done in __collapse_huge_page_isolate() after
hpage_collapse_scan_pmd(), during which all the locks will be released
temporarily. It means the pgtable can change during this phase before 2nd
round starts.
It's logically possible some ptes got wr-protected during this phase, and
we can errornously collapse a thp without noticing some ptes are
wr-protected by userfault. e1e267c792 wanted to avoid it but it only
did that for the 1st phase, not the 2nd phase.
Since __collapse_huge_page_isolate() happens after a round of small page
swapins, we don't need to worry on any !present ptes - if it existed
khugepaged will already bail out. So we only need to check present ptes
with uffd-wp bit set there.
This is something I found only but never had a reproducer, I thought it
was one caused a bug in Muhammad's recent pagemap new ioctl work, but it
turns out it's not the cause of that but an userspace bug. However this
seems to still be a real bug even with a very small race window, still
worth to have it fixed and copy stable.
Link: https://lkml.kernel.org/r/20230405155120.3608140-1-peterx@redhat.com
Fixes: e1e267c792 ("khugepaged: skip collapse if uffd-wp detected")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e1c71f8f91 upstream.
Fast wake should use 8 SYNC pulses for the preamble
and 10-16 SYNC pulses for the precharge. Reduce our
fast wake SYNC count to match the maximum value.
We also use the maximum precharge length for normal
AUX transactions.
Cc: stable@vger.kernel.org
Cc: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230329172434.18744-1-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
(cherry picked from commit 605f7c7313)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2265098fd6 upstream.
Timing Information in Datasheet assumes that HIGH_SPEED_ENA=1 should be
set for SDR12 and SDR25 modes. But sdhci_am654 driver clears
HIGH_SPEED_ENA register. Thus, Modify sdhci_am654 to not clear
HIGH_SPEED_ENA (HOST_CONTROL[2]) bit for SDR12 and SDR25 speed modes.
Fixes: e374e87538 ("mmc: sdhci_am654: Clear HISPD_ENA in some lower speed modes")
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230317092711.660897-1-b-kapoor@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shengjiu Wang
Eugene Huang
Greg Kroah-Hartman
Alexandre Ghiti
Matthieu Baerts
Stephen Boyd
Arınç ÜNAL
Ruihan Li
Daniel Vetter
Jisoo Jang
Dan Carpenter
David Matlack
SeongJae Park
Kai-Heng Feng
Yang Yingliang
Ekaterina Orlova
Nikita Zhandarovich
Tetsuo Handa
Dan Carpenter
William Breathitt Gray
Uwe Kleine-König
Kuniyuki Iwashima
Miklos Szeredi
Jiachen Zhang
Alyssa Ross
Salvatore Bonaccorso
Jiaxun Yang
Qais Yousef
Qais Yousef
Mel Gorman
Peter Xu
Ville Syrjälä
Bhavya Kapoor