Граф коммитов

11 Коммитов

Автор SHA1 Сообщение Дата
Linus Walleij bc71c0961c ARM: ux500: core U9540 support
This adds support for the U9540 variant of the U8500 series. This
is an application processor without internal modem. This is the
most basic part with ASIC ID, CPU-related fixes, IRQ list, register
ranges, timer, UART, and L2 cache setup. This is based on a patch
by Michel Jaouen which was rewritten to fit with the latest 3.3
kernel.

ChangeLog v1->v2: deleted the irqs-db9540.h file since we expect to
  migrate to using Device Tree for getting the IRQs to devices.
ChangeLog v2->v3: introduced a fixed virtual offset for the ROM
  as suggested by Arnd Bergmann.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sebastien Pasdeloup <sebastien.pasdeloup-nonst@stericsson.com>
Signed-off-by: Michel Jaouen <michel.jaouen@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-02 00:25:13 +02:00
Rusty Russell 88d8cd52bc drivers/cpufreq/db8500-cpufreq: remove references to cpu_*_map.
This has been obsolescent for a while; time for the final push.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Dave Jones <davej@redhat.com>
Cc: cpufreq@vger.kernel.org
Cc: Sundar Iyer <sundar.iyer@stericsson.com>
Cc: Martin Persson <martin.persson@stericsson.com>
Cc: Jonas Aaberg <jonas.aberg@stericsson.com>
2012-03-29 15:38:30 +10:30
Daniel Willerud c72fe851df mfd: Remove db8500-prcmu U8400 legacy
This removes the U8400 legacy from PRCMU and cpufreq drivers.
This platform has no current in-kernel users.

Signed-off-by: Daniel Willerud <daniel.willerud@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06 18:46:31 +01:00
Axel Lin eb0b38a5d2 [CPUFREQ] db8500: fix build error due to undeclared i variable
The variable i is removed by commit ded8433
"[CPUFREQ] db8500: remove unneeded for loop iteration over freq_table",
but current code to print available frequencies still uses the i variable.
Thus add the i variable back to fix below buld error:

  CC      drivers/cpufreq/db8500-cpufreq.o
drivers/cpufreq/db8500-cpufreq.c: In function 'db8500_cpufreq_init':
drivers/cpufreq/db8500-cpufreq.c:123: error: 'i' undeclared (first use in this function)
drivers/cpufreq/db8500-cpufreq.c:123: error: (Each undeclared identifier is reported only once
drivers/cpufreq/db8500-cpufreq.c:123: error: for each function it appears in.)
make[2]: *** [drivers/cpufreq/db8500-cpufreq.o] Error 1
make[1]: *** [drivers/cpufreq] Error 2
make: *** [drivers] Error 2

This patch also fixes using uninitialized i variable as array index.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dave Jones <davej@redhat.com>
2011-11-11 22:28:33 -05:00
Linus Torvalds 70c9f18ca8 Merge branch 'next' of git://github.com/kernelslacker/cpufreq
* 'next' of git://github.com/kernelslacker/cpufreq:
  [CPUFREQ] db8500: support all frequencies
  [CPUFREQ] db8500: remove unneeded for loop iteration over freq_table
  [CPUFREQ] ARM Exynos4210 PM/Suspend compatibility with different bootloaders
  [CPUFREQ] ARM: ux500: send cpufreq notification for all cpus
  [CPUFREQ] e_powersaver: Allow user to lower maximum voltage
  [CPUFREQ] e_powersaver: Check BIOS limit for CPU frequency
  [CPUFREQ] e_powersaver: Additional checks
  [CPUFREQ] exynos4210: Show list of available frequencies
2011-11-03 09:59:39 -07:00
Linus Walleij 6283e328fb [CPUFREQ] db8500: support all frequencies
This adds support for the 200 MHz frequency mode of the
DB8500 SoC, and prints the available frequencies at init
time.

Cc: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dave Jones <davej@redhat.com>
2011-10-26 17:19:47 -04:00
Axel Lin ded84337ac [CPUFREQ] db8500: remove unneeded for loop iteration over freq_table
Don't know why to do the loop iteration here. It looks unneeded.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dave Jones <davej@redhat.com>
2011-10-26 17:19:47 -04:00
Vincent Guittot 8efd072b32 [CPUFREQ] ARM: ux500: send cpufreq notification for all cpus
The same clock is used for all cpus so we must notify the frequency change
for each one in order to update the configuration of all twd clockevents.

change since V1:
* use policy->cpus instead of cpu_online_mask

Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Dave Jones <davej@redhat.com>
2011-10-26 17:19:46 -04:00
Mattias Nilsson 73180f85f4 mfd: Move to the new db500 PRCMU API
Now that we have a shared API between the DB8500 and DB5500
PRCMU's, switch to using this neutral API instead. We delete the
parts of db8500-prcmu.h that is now PRCMU-neutral, and calls will
be diverted to respective driver. Common registers are in
dbx500-prcmu-regs.h and common accessors and defines in
<linux/mfd/dbx500-prcmu.h> This way we get a a lot more
abstraction and code reuse.

Signed-off-by: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24 14:09:18 +02:00
Linus Walleij 72b2fd5cb8 cpufreq: update DB8500 cpufreq driver
This updates the ux500 cpufreq driver to the new interface from the
updated DB8500 PRCMU

Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-05-24 22:20:05 +02:00
Linus Walleij 46936340c4 mach-ux500: move CPUfreq driver to cpufreq subsystem
As part of the ARM arch subsystem migration, move the DB8500
cpufreq driver to drivers/cpufreq as discussed with Dave Jones. The
Makefile is not updated in order to avoid cross-subsystem conflicts
for this file in merges.

Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-05-24 22:19:55 +02:00