Граф коммитов

156 Коммитов

Автор SHA1 Сообщение Дата
Cornelia Huck 237242bddc virtio: Don't access index after unregister.
Virtio wants to release used indices after the corresponding
virtio device has been unregistered. However, virtio does not
hold an extra reference, giving up its last reference with
device_unregister(), making accessing dev->index afterwards
invalid.

I actually saw problems when testing my (not-yet-merged)
virtio-ccw code:

- device_add virtio-net,id=xxx
-> creates device virtio<n> with n>0

- device_del xxx
-> deletes virtio<n>, but calls ida_simple_remove with an
   index of 0

- device_add virtio-net,id=xxx
-> tries to add virtio0, which is still in use...

So let's save the index we want to release before calling
device_unregister().

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Cc: stable@kernel.org
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-11-09 14:54:24 +10:30
Brian Foley d78b519f6b virtio_mmio: Don't attempt to create empty virtqueues
If a virtio device reports a QueueNumMax of 0, vring_new_virtqueue()
doesn't check this, and thanks to an unsigned (i < num - 1) loop
guard, scribbles over memory when initialising the free list.

Avoid by not trying to create zero-descriptor queues, as there's no
way to do any I/O with one.

Signed-off-by: Brian Foley <brian.foley@arm.com>
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-28 15:05:16 +09:30
Brian Foley 3850d29fc4 virtio_mmio: fix off by one error allocating queue
vm_setup_vq fails to allow VirtQueues needing only 2 pages of
storage, as it should. Found with a kernel using 64kB pages, but
can be provoked if a virtio device reports QueueNumMax where the
descriptor table and available ring fit in one page, and the used
ring on the second (<= 227 descriptors with 4kB pages and <= 3640
with 64kB pages.)

Signed-off-by: Brian Foley <brian.foley@arm.com>
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-28 15:05:16 +09:30
Peter Senna Tschudin 74a74b376c drivers/virtio/virtio_pci.c: fix error return code
Convert a nonnegative error return code to a negative one, as returned
elsewhere in the function.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-28 15:05:16 +09:30
Michael S. Tsirkin 5543a6ac31 virtio: don't crash when device is buggy
Because of a sanity check in virtio_dev_remove, a buggy device can crash
kernel.  And in case of rproc it's userspace so it's not a good idea.
We are unloading a driver so how bad can it be?
Be less aggressive in handling this error: if it's a driver bug,
warning once should be enough.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-28 15:05:16 +09:30
Rusty Russell eccbb05a64 virtio: remove CONFIG_VIRTIO_RING
Everyone who selects VIRTIO is also made to select VIRTIO_RING; just make
them synonymous, since we removed the indirection layer some time ago.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-28 15:05:15 +09:30
Rusty Russell 387daf1716 virtio: add help to CONFIG_VIRTIO option.
Trying to enable a virtio driver (eg CONFIG_VIRTIO_BLK) is painful
because it depends on CONFIG_VIRTIO.  CONFIG_VIRTIO doesn't tell you
how to turn it on (it's selected from anything which provides a virtio
bus).

This patch at least adds some documentation, visible in menuconfig, as
a hint.

Reported-by: Kent Overstreet <koverstreet@google.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-28 15:05:15 +09:30
Michael S. Tsirkin 6457f126c8 virtio: support reserved vqs
virtio network device multiqueue support reserves
vq 3 for future use (useful both for future extensions and to make it
pretty - this way receive vqs have even and transmit - odd numbers).
Make it possible to skip initialization for
specific vq numbers by specifying NULL for name.
Document this usage as well as (existing) NULL callback.

Drivers using this not coded up yet, so I simply tested
with virtio-pci and verified that this patch does
not break existing drivers.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-28 15:05:15 +09:30
Jason Wang 75a0a52be3 virtio: introduce an API to set affinity for a virtqueue
Sometimes, virtio device need to configure irq affinity hint to maximize the
performance. Instead of just exposing the irq of a virtqueue, this patch
introduce an API to set the affinity for a virtqueue.

The api is best-effort, the affinity hint may not be set as expected due to
platform support, irq sharing or irq type. Currently, only pci method were
implemented and we set the affinity according to:

- if device uses INTX, we just ignore the request
- if device has per vq vector, we force the affinity hint
- if the virtqueues share MSI, make the affinity OR over all affinities
  requested

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-28 15:05:15 +09:30
Jason Wang 17bb6d4088 virtio-ring: move queue_index to vring_virtqueue
Instead of storing the queue index in transport-specific virtio structs,
this patch moves them to vring_virtqueue and introduces an helper to get
the value.  This lets drivers simplify their management and tracing of
virtqueues.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-28 15:05:15 +09:30
Rusty Russell 7a23eb28fa virtio_balloon: not EXPERIMENTAL any more.
It is not experimental in any vaguely-sane sense.

Reported-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-28 15:05:14 +09:30
Michael S. Tsirkin 04679f34c1 virtio-balloon: dependency fix
Devices should depend on virtio, not select it.  It's supposed to be
selected by the particular driver, e.g. VIRTIO_PCI.
Make balloon depend on VIRTIO and EXPERIMENTAL
(to match description).

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-28 15:05:14 +09:30
Nicholas Bellinger 59057fbc37 [SCSI] virtio-scsi: Add vdrv->scan for post VIRTIO_CONFIG_S_DRIVER_OK LUN scanning
This patch changes virtio-scsi to use a new virtio_driver->scan() callback
so that scsi_scan_host() can be properly invoked once virtio_dev_probe() has
set add_status(dev, VIRTIO_CONFIG_S_DRIVER_OK) to signal active virtio-ring
operation, instead of from within virtscsi_probe().

This fixes a bug where SCSI LUN scanning for both virtio-scsi-raw and
virtio-scsi/tcm_vhost setups was happening before VIRTIO_CONFIG_S_DRIVER_OK
had been set, causing VIRTIO_SCSI_S_BAD_TARGET to occur.  This fixes a bug
with virtio-scsi/tcm_vhost where LUN scan was not detecting LUNs.

Tested with virtio-scsi-raw + virtio-scsi/tcm_vhost w/ IBLOCK on 3.5-rc2 code.

Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20 08:59:03 +01:00
Michael S. Tsirkin 9c378abc5c virtio-balloon: fix add/get API use
Since ee7cd8981e 'virtio: expose added
descriptors immediately.', in virtio balloon virtqueue_get_buf might
now run concurrently with virtqueue_kick.  I audited both and this
seems safe in practice but this is not guaranteed by the API.
Additionally, a spurious interrupt might in theory make
virtqueue_get_buf run in parallel with virtqueue_add_buf, which is
racy.

While we might try to protect against spurious callbacks it's
easier to fix the driver: balloon seems to be the only one
(mis)using the API like this, so let's just fix balloon.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (removed unused var)
2012-07-09 09:07:22 +09:30
Pawel Moll 81a054ce0b virtio-mmio: Devices parameter parsing
This patch adds an option to instantiate guest virtio-mmio devices
basing on a kernel command line (or module) parameter, for example:

	virtio_mmio.devices=0x100@0x100b0000:48

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-05-22 12:16:15 +09:30
Asias He 90e03207f4 virtio: Use ida to allocate virtio index
Current index allocation in virtio is based on a monotonically
increasing variable "index". This means we'll run out of numbers
after a while. E.g. someone crazy doing this in host side.

while(1) {
	hot-plug a virtio device
	hot-unplug the virito devcie
}

Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-05-22 12:16:12 +09:30
Amit Shah c877bab507 virtio: balloon: separate out common code between remove and freeze functions
The remove and freeze functions have a lot of shared code; put it into a
common function that gets called by both.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-05-22 12:16:11 +09:30
Amit Shah c45b4166d9 virtio: balloon: drop restore_common()
restore_common() was used when there were different thaw and freeze PM
callbacks implemented.  We removed thaw in commit
f38f8387cb.

restore_common() can be removed and virtballoon_restore() can itself do
the restore ops.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-05-22 12:16:11 +09:30
Amit Shah b8ae0eb320 virtio: balloon: let host know of updated balloon size before module removal
When the balloon module is removed, we deflate the balloon, reclaiming
all the pages that were given to the host.  However, we don't update the
config values for the new balloon size, resulting in the host showing
outdated balloon values.

The size update is done after each leak and fill operation, only the
module removal case was left out.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-05-17 12:14:34 +03:00
Michael S. Tsirkin 3ccc9372ed virtio_balloon: fix handling of PAGE_SIZE != 4k
As reported by David Gibson, current code handles PAGE_SIZE != 4k
completely wrong which can lead to guest memory corruption errors:

- page_to_balloon_pfn is wrong: e.g. on system with 64K page size
 it gives the same pfn value for 16 different pages.

- we also need to convert back to linux pfns when we free.

- for each linux page we need to tell host about multiple balloon
  pages, but code only adds one pfn to the array.

This patch fixes all that, tested with a 64k ppc64 kernel.

Reported-by: David Gibson <david@gibson.dropbear.id.au>
Tested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-04-15 11:51:06 +03:00
David Gibson 1a87228f5f virtio_balloon: Fix endian bug
Although virtio config space fields are usually in guest-native endian,
the spec for the virtio balloon device explicitly states that both fields
in its config space are little-endian.

However, the current virtio_balloon driver does not have a suitable endian
swap for the 'num_pages' field, although it does have one for the 'actual'
field.  This patch corrects the bug, adding sparse annotation while we're
at it.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-04-15 11:51:05 +03:00
Amit Shah f878d0be22 virtio-pci: switch to PM ops macro to initialise PM functions
Use the SET_SYSTEM_SLEEP_PM_OPS macro to initialise the suspend/resume
functions in the new PM API.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
2012-03-31 08:09:51 +05:30
Amit Shah 04c2322bee virtio-pci: S3 support
There's no difference in supporting S3 and S4 for virtio devices: the
vqs have to be re-created as the device has to be assumed to be reset at
restore-time.  Since S4 already handles this situation, we can directly
use the same code and callbacks for S3 support.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
2012-03-31 08:09:51 +05:30
Amit Shah 0517fdd156 virtio-pci: drop restore_common()
restore_common() was shared between restore and thaw callbacks.  With
thaw gone, we don't need restore_common() anymore.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
2012-03-31 08:09:51 +05:30
Amit Shah f38f8387cb virtio: drop thaw PM operation
The thaw operation was used by the balloon driver, but after the last
commit there's no reason to have separate thaw and restore callbacks.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
2012-03-31 08:09:50 +05:30
Amit Shah e47d854e57 virtio: balloon: Allow stats update after restore from S4
There's no reason stats update after restore can't work.  If a host
requested for stats, and before servicing the request, the guest entered
S4, upon restore, the stats request can still be processed and sent off
to the host.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
2012-03-31 08:09:50 +05:30
David Howells 9ffc93f203 Remove all #inclusions of asm/system.h
Remove all #inclusions of asm/system.h preparatory to splitting and killing
it.  Performed with the following command:

perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *`

Signed-off-by: David Howells <dhowells@redhat.com>
2012-03-28 18:30:03 +01:00
Amit Shah 4eb05d562e virtio: balloon: leak / fill balloon across S4
commit e562966dba added support for S4 to
the balloon driver.  The freeze function did nothing to free the pages,
since reclaiming the pages from the host to immediately give them back
(if S4 was successful) seemed wasteful.  Also, if S4 wasn't successful,
the guest would have to re-fill the balloon.  On restore, the pages were
supposed to be marked freed and the free page counters were incremented
to reflect the balloon was totally deflated.

However, this wasn't done right.  The pages that were earlier taken away
from the guest during a balloon inflation operation were just shown as
used pages after a successful restore from S4.  Just a fancy way of
leaking lots of memory.

Instead of trying that, just leak the balloon on freeze and fill it on
restore/thaw paths.  This works properly now.  The optimisation to not
leak can be added later on after a bit of refactoring of the code.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-03-01 09:28:41 +10:30
Jason Wang a72caae218 virtio: correct the memory barrier in virtqueue_kick_prepare()
Use virtio_mb() to make sure the available index to be exposed before
checking the the avail event. Otherwise we may get stale value of
avail event in guest and never kick the host after.

Note: this fixes a bug introduced by ee7cd8981e.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: stable@kernel.org
2012-01-28 08:10:23 +10:30
Jason Wang 4dbc5d9f4f virtio: fix typos of memory barriers
Note: this fixes a bug introduced recently in
7b21e34fd1.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-28 08:10:22 +10:30
Amit Shah e562966dba virtio: balloon: Add freeze, restore handlers to support S4
Handling balloon hibernate / restore is tricky.  If the balloon was
inflated before going into the hibernation state, upon resume, the host
will not have any memory of that.  Any pages that were passed on to the
host earlier would most likely be invalid, and the host will have to
re-balloon to the previous value to get in the pre-hibernate state.

So the only sane thing for the guest to do here is to discard all the
pages that were put in the balloon.  When to discard the pages is the
next question.

One solution is to deflate the balloon just before writing the image to
the disk (in the freeze() PM callback).  However, asking for pages from
the host just to discard them immediately after seems wasteful of
resources.  Hence, it makes sense to do this by just fudging our
counters soon after wakeup.  This means we don't deflate the balloon
before sleep, and also don't put unnecessary pressure on the host.

This also helps in the thaw case: if the freeze fails for whatever
reason, the balloon should continue to remain in the inflated state.
This was tested by issuing 'swapoff -a' and trying to go into the S4
state.  That fails, and the balloon stays inflated, as expected.  Both
the host and the guest are happy.

Finally, in the restore() callback, we empty the list of pages that were
previously given off to the host, add the appropriate number of pages to
the totalram_pages counter, reset the num_pages counter to 0, and
all is fine.

As a last step, delete the vqs on the freeze callback to prepare for
hibernation, and re-create them in the restore and thaw callbacks to
resume normal operation.

The kthread doesn't race with any operations here, since it's frozen
before the freeze() call and is thawed after the thaw() and restore()
callbacks, so we're safe with that.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-12 15:44:47 +10:30
Amit Shah be91c33dd1 virtio: balloon: Move vq initialization into separate function
The probe and PM restore functions will share this code.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-12 15:44:46 +10:30
Amit Shah f0fe6f1150 virtio: pci: add PM notification handlers for restore, freeze, thaw, poweroff
Handle thaw, restore and freeze notifications from the PM core.  Expose
these to individual virtio drivers that can quiesce and resume vq
operations.  For drivers not implementing the thaw() method, use the
restore method instead.

These functions also save device-specific data so that the device can be
put in pre-suspend state after resume, and disable and enable the PCI
device in the freeze and resume functions, respectively.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-12 15:44:44 +10:30
Amit Shah d077536386 virtio: pci: switch to new PM API
The older PM API doesn't have a way to get notifications on hibernate
events.  Switch to the newer one that gives us those notifications.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-12 15:44:44 +10:30
Rusty Russell e93300b1af virtio: add debugging if driver doesn't kick.
Under the existing #ifdef DEBUG, check that they don't have more than
1/10 of a second between an add_buf() and a
virtqueue_notify()/virtqueue_kick_prepare() call.

We could get false positives on a really busy system, but good for
development.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-12 15:44:43 +10:30
Rusty Russell ee7cd8981e virtio: expose added descriptors immediately.
A virtio driver does virtqueue_add_buf() multiple times before finally
calling virtqueue_kick(); previously we only exposed the added buffers
in the virtqueue_kick() call.  This means we don't need a memory
barrier in virtqueue_add_buf(), but it reduces concurrency as the
device (ie. host) can't see the buffers until the kick.

In the unusual (but now possible) case where a driver does add_buf()
and get_buf() without doing a kick, we do need to insert one before
our counter wraps.  Otherwise we could wrap num_added, and later on
not realize that we have passed the marker where we should have
kicked.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-12 15:44:43 +10:30
Rusty Russell 3b720b8c86 virtio: avoid modulus operation.
Since we know vq->vring.num is a power of 2, modulus is lazy (it's asserted
in vring_new_virtqueue()).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-12 15:44:43 +10:30
Rusty Russell 41f0377f73 virtio: support unlocked queue kick
Based on patch by Christoph for virtio_blk speedup:

	Split virtqueue_kick to be able to do the actual notification
	outside the lock protecting the virtqueue.  This patch was
	originally done by Stefan Hajnoczi, but I can't find the
	original one anymore and had to recreated it from memory.
	Pointers to the original or corrections for the commit message
	are welcome.

Stefan's patch was here:

	a6d06644e3
	http://www.spinics.net/lists/linux-virtualization/msg14616.html

Third time's the charm!

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-12 15:44:43 +10:30
Rusty Russell f96fde41f7 virtio: rename virtqueue_add_buf_gfp to virtqueue_add_buf
Remove wrapper functions. This makes the allocation type explicit in
all callers; I used GPF_KERNEL where it seemed obvious, left it at
GFP_ATOMIC otherwise.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2012-01-12 15:44:42 +10:30
Rusty Russell 5dfc17628d virtio: document functions better.
The old documentation is left over from when we used a structure with
strategy pointers.

And move the documentation to the C file as per kernel practice.
Though I disagree...

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2012-01-12 15:44:42 +10:30
Sasha Levin 1e214a5c1a virtio-balloon: Trivial cleanups
Trivial changes to remove forgotten junk, format comments, and correct names.

Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-12 15:44:42 +10:30
Rusty Russell 7b21e34fd1 virtio: harsher barriers for rpmsg.
We were cheating with our barriers; using the smp ones rather than the
real device ones.  That was fine, until rpmsg came along, which is
used to talk to a real device (a non-SMP CPU).

Unfortunately, just putting back the real barriers (reverting
d57ed95d) causes a performance regression on virtio-pci.  In
particular, Amos reports netbench's TCP_RR over virtio_net CPU
utilization increased up to 35% while throughput went down by up to
14%.

By comparison, this branch is in the noise.

Reference: https://lkml.org/lkml/2011/12/11/22

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-12 15:44:42 +10:30
David S. Miller b3613118eb Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2011-12-02 13:49:21 -05:00
Michael S. Tsirkin e6af578c53 virtio-pci: make reset operation safer
virtio pci device reset actually just does an I/O
write, which in PCI is really posted, that is it
can complete on CPU before the device has received it.

Further, interrupts might have been pending on
another CPU, so device callback might get invoked after reset.

This conflicts with how drivers use reset, which is typically:
	reset
	unregister
a callback running after reset completed can race with
unregister, potentially leading to use after free bugs.

Fix by flushing out the write, and flushing pending interrupts.

This assumes that device is never reset from
its vq/config callbacks, or in parallel with being
added/removed, document this assumption.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-11-24 13:04:48 +10:30
Sasha Levin fe1a7fe2c4 virtio-mmio: Correct the name of the guest features selector
Guest features selector spelling mistake.

Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-11-24 13:04:47 +10:30
Heiko Carstens bd20817f73 virtio: add HAS_IOMEM dependency to MMIO platform bus driver
Fix this compile error on s390:

  CC [M]  drivers/virtio/virtio_mmio.o
drivers/virtio/virtio_mmio.c: In function 'vm_get_features':
drivers/virtio/virtio_mmio.c:107:2: error: implicit declaration of function 'writel'

Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-11-24 13:04:47 +10:30
David S. Miller efd0bf97de Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
The forcedeth changes had a conflict with the conversion over
to atomic u64 statistics in net-next.

The libertas cfg.c code had a conflict with the bss reference
counting fix by John Linville in net-next.

Conflicts:
	drivers/net/ethernet/nvidia/forcedeth.c
	drivers/net/wireless/libertas/cfg.c
2011-11-21 13:50:33 -05:00
Rick Jones 66846048f5 enable virtio_net to return bus_info in ethtool -i consistent with emulated NICs
Add a new .bus_name to virtio_config_ops then modify virtio_net to
call through to it in an ethtool .get_drvinfo routine to report
bus_info in ethtool -i output which is consistent with other
emulated NICs and the output of lspci.

Signed-off-by: Rick Jones <rick.jones2@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16 17:26:46 -05:00
Michael S. Tsirkin 72103bd128 virtio-pci: fix use after free
Commit 31a3ddda16 introduced
a use after free in virtio-pci. The main issue is
that the release method signals removal of the virtio device,
while remove signals removal of the pci device.

For example, on driver removal or hot-unplug,
virtio_pci_release_dev is called before virtio_pci_remove.
We then might get a crash as virtio_pci_remove tries to use the
device freed by virtio_pci_release_dev.

We allocate/free all resources together with the
pci device, so we can leave the release method empty.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: stable@kernel.org
2011-11-14 11:16:26 +10:30
Linus Torvalds 32aaeffbd4 Merge branch 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
* 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits)
  Revert "tracing: Include module.h in define_trace.h"
  irq: don't put module.h into irq.h for tracking irqgen modules.
  bluetooth: macroize two small inlines to avoid module.h
  ip_vs.h: fix implicit use of module_get/module_put from module.h
  nf_conntrack.h: fix up fallout from implicit moduleparam.h presence
  include: replace linux/module.h with "struct module" wherever possible
  include: convert various register fcns to macros to avoid include chaining
  crypto.h: remove unused crypto_tfm_alg_modname() inline
  uwb.h: fix implicit use of asm/page.h for PAGE_SIZE
  pm_runtime.h: explicitly requires notifier.h
  linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h
  miscdevice.h: fix up implicit use of lists and types
  stop_machine.h: fix implicit use of smp.h for smp_processor_id
  of: fix implicit use of errno.h in include/linux/of.h
  of_platform.h: delete needless include <linux/module.h>
  acpi: remove module.h include from platform/aclinux.h
  miscdevice.h: delete unnecessary inclusion of module.h
  device_cgroup.h: delete needless include <linux/module.h>
  net: sch_generic remove redundant use of <linux/module.h>
  net: inet_timewait_sock doesnt need <linux/module.h>
  ...

Fix up trivial conflicts (other header files, and  removal of the ab3550 mfd driver) in
 - drivers/media/dvb/frontends/dibx000_common.c
 - drivers/media/video/{mt9m111.c,ov6650.c}
 - drivers/mfd/ab3550-core.c
 - include/linux/dmaengine.h
2011-11-06 19:44:47 -08:00