Граф коммитов

807 Коммитов

Автор SHA1 Сообщение Дата
Linus Torvalds 42933bac11 Merge branch 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6
* 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6:
  Fix common misspellings
2011-04-07 11:14:49 -07:00
Linus Torvalds 2b9accbee5 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: Add support for CH Pro Throttle
  HID: hid-magicmouse: Increase evdev buffer size
  HID: add FF support for Logitech G25/G27
  HID: roccat: Add support for wireless variant of Pyra
  HID: Fix typo Keyoutch -> Keytouch
  HID: add support for Skycable 0x3f07 wireless presenter
2011-04-07 09:42:13 -07:00
Jiri Kosina da60325d83 HID: Add support for CH Pro Throttle
CH Pro Throttle needs NOGET the same way as other products from
the same vendor require.

Reported-by: Unavowed <unavowed@vexillium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-04-06 07:12:32 -07:00
Chase Douglas cc5e0f08ca HID: hid-magicmouse: Increase evdev buffer size
The evdev buffer isn't big enough when you get many fingers on the
device. Bump up the buffer to a reasonable size, matching what other
multitouch devices use. Without this change, events may be discarded in
the evdev buffer before they are read.

Reported-by: Simon Budig <simon@budig.de>
Cc: Henrik Rydberg <rydberg@euromail.se>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: stable@kernel.org
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-04-06 06:17:45 -07:00
Simon Wood 1478d82df8 HID: add FF support for Logitech G25/G27
Small patch to add support for the G25/G27 by adding USB ID's
as suggested by Peter.

Boots but otherwise untested as I don't have hardware, .debs for
kernel (2.6.38) here if want to test/run Ubuntu/Debian:
http://www.mungewell.org/Logitech_Wii_Wheel/

Reported-by: Peter Gundermann <slim-one@users.sourceforge.net>
Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-04-01 15:51:10 +02:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Stefan Achatz 3fce224608 HID: roccat: Add support for wireless variant of Pyra
Wireless variant of Roccat Pyra finally has been tested with
existing driver.

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-24 12:47:46 +01:00
Matthew Garrett bb7ca747f8 backlight: add backlight type
There may be multiple ways of controlling the backlight on a given
machine.  Allow drivers to expose the type of interface they are
providing, making it possible for userspace to make appropriate policy
decisions.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: David Airlie <airlied@linux.ie>
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:43:59 -07:00
Stephen Boyd 3d366e2860 HID: Fix typo Keyoutch -> Keytouch
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-22 10:34:23 +01:00
Jiri Kosina d586dca06a HID: add support for Skycable 0x3f07 wireless presenter
This device contains the very same bug in report descriptor as the
Ortek ones do (i.e. LogicalMinimum == 1, which is wrong for the key
array).

As we have more reports for the Ortek devices, we are keeping the driver
name for now. Apparently there is a chip producer which sells chip with
this buggy descriptor to multiple vendors. Thus if such reports start
to come at highger frequency, we'll either have to rename the driver
accordingly, or come up with more generic workaround.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-21 16:12:23 +01:00
Linus Torvalds a952baa034 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (64 commits)
  Input: tsc2005 - remove 'disable' sysfs attribute
  Input: tsc2005 - add open/close
  Input: tsc2005 - handle read errors from SPI layer
  Input: tsc2005 - do not rearm timer in hardirq handler
  Input: tsc2005 - don't use work for 'pen up' handling
  Input: tsc2005 - do not use 0 in place of NULL
  Input: tsc2005 - use true/false for boolean variables
  Input: tsc2005 - hide selftest attribute if we can't reset
  Input: tsc2005 - rework driver initialization code
  Input: tsc2005 - set up bus type in input device
  Input: tsc2005 - set up parent device
  Input: tsc2005 - clear driver data after unbinding
  Input: tsc2005 - add module description
  Input: tsc2005 - remove driver banner message
  Input: tsc2005 - remove incorrect module alias
  Input: tsc2005 - convert to using dev_pm_ops
  Input: tsc2005 - use spi_get/set_drvdata()
  Input: introduce tsc2005 driver
  Input: xen-kbdfront - move to drivers/input/misc
  Input: xen-kbdfront - add grant reference for shared page
  ...
2011-03-19 22:27:06 -07:00
Linus Torvalds 7fd23a2471 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (48 commits)
  HID: add support for Logitech Driving Force Pro wheel
  HID: hid-ortek: remove spurious reference
  HID: add support for Ortek PKB-1700
  HID: roccat-koneplus: vorrect mode of sysfs attr 'sensor'
  HID: hid-ntrig: init settle and mode check
  HID: merge hid-egalax into hid-multitouch
  HID: hid-multitouch: Send events per slot if CONTACTCOUNT is missing
  HID: ntrig remove if and drop an indent
  HID: ACRUX - activate the device immediately after binding
  HID: ntrig: apply NO_INIT_REPORTS quirk
  HID: hid-magicmouse: Correct touch orientation direction
  HID: ntrig don't dereference unclaimed hidinput
  HID: Do not create input devices for feature reports
  HID: bt hidp: send Output reports using SET_REPORT on the Control channel
  HID: hid-sony.c: Fix sending Output reports to the Sixaxis
  HID: add support for Keytouch IEC 60945
  HID: Add HID Report Descriptor to sysfs
  HID: add IRTOUCH infrared USB to hid_have_special_driver
  HID: kernel oops in out_cleanup in function hidinput_connect
  HID: Add teletext/color keys - gyration remote - EU version (GYAR3101CKDE)
  ...
2011-03-18 10:35:30 -07:00
Jiri Kosina 65b06194c9 Merge branches 'dragonrise', 'hidraw-feature', 'multitouch', 'ntrig', 'roccat', 'upstream' and 'upstream-fixes' into for-linus 2011-03-17 14:31:46 +01:00
Jiri Kosina 5623a24a80 HID: add support for Logitech Driving Force Pro wheel
Add force feedback support for Logitech Driving Force Pro wheel.

Device IDs reported by Michal Malý.

Reported-by: Michal Malý <madcatxster@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-17 00:43:23 +01:00
Jiri Kosina e96838df55 HID: hid-ortek: remove spurious reference
Remove spurious bugzilla reference from the source comment header.

Also fix the comment to be more correct (it's HID report descriptor
rather than USB).

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-17 00:39:33 +01:00
Herton Ronaldo Krzesinski 270fdc0748 HID: add support for Ortek PKB-1700
As reported on http://ubuntuforums.org/showthread.php?t=1594007 the
PKB-1700 needs same special handling as WKB-2000. This change is
originally based on patch posted by user asmoore82 on the Ubuntu
forums.

Cc: stable@kernel.org
Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-17 00:32:42 +01:00
Stefan Achatz 61c29f5b18 HID: roccat-koneplus: vorrect mode of sysfs attr 'sensor'
Mode of sysfs attribute 'sensor' was wrongly set to writeonly.
Corrected this to readwrite.

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-15 15:41:20 +01:00
Rafi Rubin 7b2a64c96a HID: hid-ntrig: init settle and mode check
Adding a wait before the wakeup signal.

As a precautionary measure sanity check the current sensor mode.  If
needed reset it to "dual".

When the device is responding poorly and needs the wakeup call, it was
missing it.  Giving it a chance to settle first improves the chances
that signal gets through.

Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu>
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-14 13:10:13 +01:00
Richard Nauber 4875ac114d HID: merge hid-egalax into hid-multitouch
This patch merges the hid-egalax driver into hid-multitouch.  There
are two types of devices support by the hid-egalax driver: resistive
and capacitive. Here, they are implicitly distinguished by the absence
of a HID_DG_CONTACTCOUNT field in the latter, so no special code path
needs to be introduced.

As a side effect, this patch fixes the broken suspend/resume behavior
in the old driver.

[rydberg@euromail.se: minor fixups]
Signed-off-by: Richard Nauber <Richard.Nauber@gmail.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-14 13:05:08 +01:00
Henrik Rydberg f153fc3990 HID: hid-multitouch: Send events per slot if CONTACTCOUNT is missing
The recent capacitive DWAV firmwares do not use the CONTACTCOUNT
field, and the touch frame boundary can therefore not be determined.
This patch makes the driver report the touch frame at each completed
slot instead.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-14 13:05:07 +01:00
Rafi Rubin ff4046294b HID: ntrig remove if and drop an indent
Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu>
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-14 12:58:15 +01:00
Andy Botting 47340bd9fe Input: bcm5974 - add support for MacBookPro8
This patch add multitouch support for the MacBookPro8,1 and
MacBookPro8,2 models.

Cc: stable@kernel.org
Signed-off-by: Andy Botting <andy@andybotting.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-12 20:37:30 -08:00
Dmitry Torokhov 0ae4381097 HID: ACRUX - activate the device immediately after binding
This device does not tolerate delayed opening and goes into a coma if
we try to that. Ubuntu even has a crutch for udev that opened the device
upon seeing it for the first time, but it did not work if we happened to
boot with the device attached, since by the time userspace got around
opening the device it was too late. Let's start the device immediately
to deal with this issue.

Reported-by: Sergei Kolzun <x0r@dv-life.ru>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-12 21:47:18 +01:00
Rafi Rubin 6638dedaec HID: ntrig: apply NO_INIT_REPORTS quirk
Probing reports does bad things with some ntrig firmwares, better to
just leave them alone.

Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-10 11:37:55 +01:00
Henrik Rydberg 2d9ca4e9f3 HID: hid-magicmouse: Correct touch orientation direction
The magic trackpad and mouse both report touch orientation in opposite
direction to the bcm5974 driver and what is written in
Documents/input/multi-touch-protocol.txt. This patch reverts the
direction, so that all in-kernel devices with this feature behave the
same way.

Since no known application has been utilizing this information yet, it
seems appropriate also for stable.

Cc: stable@kernel.org
Cc: Michael Poole <mdpoole@troilus.org>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-10 00:05:59 +01:00
Rafi Rubin f41a52d301 HID: ntrig don't dereference unclaimed hidinput
Check before dereferencing field->hidinput to fix a reported invalid
deference bug.

Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-08 14:36:31 +01:00
Henrik Rydberg f635bd11c8 HID: Do not create input devices for feature reports
When the multi input quirk is set, there is a new input device
created for every feature report. Since the idea is to present
features per hid device, not per input device, revert back to
the original report loop and change the feature_mapping() callback
to not take the input device as argument.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Tested-by: Benjamin Tissoires <benjmain.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-01 17:25:39 +01:00
Antonio Ospite 5710fabf31 HID: hid-sony.c: Fix sending Output reports to the Sixaxis
The Sixaxis does not want the report_id as part of the data packet in
Output reports, so we have to discard buf[0] when sending the actual
control message.

Add also some documentation about that and about why
hdev->hid_output_raw_report needs to be overridden.

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-21 13:48:50 +01:00
Jiri Kosina 177900e8c9 HID: add support for Keytouch IEC 60945
The keyboard has several bugs in its report descriptor, most
importantly the Logical Min/Max are completely off.

Replace it with simplified descriptor which describes it properly.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-17 15:12:45 +01:00
Alan Ott 6d3bfb7434 HID: Add HID Report Descriptor to sysfs
Add a new binary sysfs entry called report_descriptor which contains
the HID report descriptor.

Signed-off-by: Alan Ott <alan@signal11.us>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-17 13:23:14 +01:00
Benjamin Tissoires b2e7617e09 HID: add IRTOUCH infrared USB to hid_have_special_driver
Without this patch, the device is handled by hidinput and does
not have the right behavior.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-16 18:38:21 +01:00
Benjamin Tissoires d9236303d0 HID: kernel oops in out_cleanup in function hidinput_connect
Goto out_cleanup infers a kernel oops: hidinput_disconnect calls
input_unregister_driver to all members of hid->inputs.
However, hidinput already has been added to hid->inputs even
though input_register_device was not called.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Reviewed-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-15 23:47:05 +01:00
Steffen Barszus 6497dc3a54 HID: Add teletext/color keys - gyration remote - EU version (GYAR3101CKDE)
This patch adds support for 5 keys which can be found
only on the EU version of the gyration remote, which has been not
mapped before.

Signed-off-by: Steffen Barszus <steffenbpunkt[AT]googlemail[DOT]com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-15 10:29:57 +01:00
Chris Schlund 8ef3953108 HID: hid-lcpower: fix key mapping
I already got some feedback for this module, telling me red and blue keys are
exchanged.  I checked it, and they are right. Due to my incorrect userspace
settings I missed this during my testing.

Signed-off-by: Chris Schlund <chrisschlund@gmx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-13 15:04:51 +01:00
Alan Ott b4dbde9da8 HID: Add Support for Setting and Getting Feature Reports from hidraw
Per the HID Specification, Feature reports must be sent and received on
the Configuration endpoint (EP 0) through the Set_Report/Get_Report
interfaces.  This patch adds two ioctls to hidraw to set and get feature
reports to and from the device.  Modifications were made to hidraw and
usbhid.

New hidraw ioctls:
  HIDIOCSFEATURE - Perform a Set_Report transfer of a Feature report.
  HIDIOCGFEATURE - Perform a Get_Report transfer of a Feature report.

Signed-off-by: Alan Ott <alan@signal11.us>
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-11 15:05:49 +01:00
Chris Schlund 75b0702246 HID: add support for wireless remote LC Power model RC1000MCE
Signed-off-by: Chris Schlund <chrisschlund@gmx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-03 16:41:59 +01:00
Stefan Achatz 5dc0c9835f HID: roccat: Rename header roccat.h -> hid-roccat.h
It was desired that the header roccat.h should be named hid-roccat.h

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-03 16:37:28 +01:00
Stefan Achatz e6fa47af55 HID: roccat: Fix bug that prevented roccat chardev from removing devices
pointer to device was cleared too early. This is fixed now.

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-03 16:37:28 +01:00
Stefan Achatz 74b643dac4 HID: roccat: Fix NULL pointer dereference when unloading module
Class was destroyed before starting the unregistering driver chain.
Disconnecting a device from roccat chardev in this process then
raised a NULL pointer dereference.
Fixed this by destroying class after unregistering driver.

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-03 16:37:28 +01:00
Stefan Achatz 8211e46004 HID: roccat: Add ioctl command to retreive report size from chardev
Roccat chardev was reworked to support only a defined report size per
device and this can be retreived by an ioctl now to enable future changes
in report definitions.
Header was moved/renamed from drivers/hid to include/linux for accessibility.

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-03 16:37:28 +01:00
Stefan Achatz 432762e28b HID: roccat: Increase waiting time for Kone[+] to prevent occasional freezes
On newer kernels the device freezes occasionally on initialization with just
70msec between reads. Increased this value to safe 100msec.

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-03 16:37:27 +01:00
Stefan Achatz 0e70f97f25 HID: roccat: Add support for Kova[+] mouse
This patch adds support for Roccat Kova[+] mouse.
Userland tools can soon be found at http://sourceforge.net/projects/roccat

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-03 16:37:27 +01:00
Stefan Achatz 5772f63613 HID: roccat: Introduce module hid-roccat-common
Module hid-roccat-common contains functions used by roccat device driver
modules to reduce code duplication.
At the moment it contains just two wrapper methods for usb_control_msg
that ensure that the buffer used for transfer is dma capable which wasn't
the case before.
The kconfig option is not visible to the user but will be selected by the
device specific drivers.

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-03 16:37:27 +01:00
Stefan Achatz a28764ef80 HID: roccat: Use new hid_err macros
Using the new hid_err macros instead of dev_err.

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-03 16:37:27 +01:00
Stefan Achatz cb38cd8786 HID: roccat: Remove empty function definitions for roccat chardev
Roccat chardev is a dependency of all device specific drivers, so
the empty definitions are not needed anymore.

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-03 16:37:26 +01:00
Stefan Achatz 3a22ebe9cc HID: hidraw: fix hidraw_disconnect()
hidraw_disconnect() first sets an entry in hidraw_table to NULL
and calls device_destroy() afterwards. The thereby called
hidraw_release() tries to read this already cleared value resulting
in never removing any device from the list.
This got fixed by changing the order of events.

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-01 11:16:51 +01:00
Nikolai Kondrashov b4a65f4ef5 HID: update dragonrise Kconfig description
Add list of (supposedly) supported gamepads to dragonrise driver Kconfig
description.

Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-01 11:01:06 +01:00
Nikolai Kondrashov e05eefb9be HID: add support for DragonRise PID 0011 gamepad
Add support for DragonRise Inc. gamepad with USB PID 0x0011 by fixing its report
descriptor. This mainly removes spurious axis.

Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-01 11:01:06 +01:00
Nikolai Kondrashov 152fd6347e HID: rename hid-drff.c to hid-dr.c
Rename drivers/hid/hid-drff.c (a DragonRise Inc. force feedback gamepad driver)
to driver/hid/hid-dr.c.

This prepares it for addition of support for another gamepad, without force
feedback.

Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-01 11:01:06 +01:00
Dmitry Torokhov aebd636bd6 Input: switch completely over to the new versions of get/setkeycode
All users of old style get/setkeycode methids have been converted so
it is time to retire them.

Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-31 21:16:59 -08:00