Граф коммитов

121 Коммитов

Автор SHA1 Сообщение Дата
Linus Torvalds df9b29d13e Merge branch 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6
* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (28 commits)
  staging: usbip: bugfix for isochronous packets and optimization
  staging: usbip: bugfix add number of packets for isochronous frames
  staging: usbip: bugfixes related to kthread conversion
  staging: usbip: fix shutdown problems.
  staging: hv: Fix GARP not sent after Quick Migration
  staging: IIO: IMU: ADIS16400: Avoid using printk facility directly
  staging: IIO: IMU: ADIS16400: Fix product ID check, skip embedded revision number
  staging: IIO: IMU: ADIS16400: Make sure only enabled scan_elements are pushed into the ring
  staging: IIO: IMU: ADIS16400: Fix addresses of GYRO and ACCEL calibration offset
  staging: IIO: IMU: ADIS16400: Add delay after self test
  staging: IIO: IMU: ADIS16400: Fix up SPI messages cs_change behavior
  staging/rtl81*: build as loadable modules only
  staging: brcm80211: removed 'is_amsdu causing toss' log spam
  staging: brcm80211: fix for 'Short CCK' log spam
  staging: brcm80211: fix for 'AC_BE txop..' logs spammed problem
  staging: memrar: remove driver from tree
  staging: sep: remove last memrar remnants
  staging: fix hv_mouse build, needs delay.h
  staging: fix olpc_dcon build errors
  staging: sm7xx: fixed defines
  ...

Fix up trivial conflict in drivers/staging/memrar/memrar_handler.c
(deleted vs trivial spelling fixes)
2011-04-07 11:36:44 -07:00
Randy Dunlap 84ba253b07 staging/rtl81*: build as loadable modules only
These 3 drivers contain much duplicated (triplicated) code, so
building them as built-in results in many errors like:

(.text+0x1b160): multiple definition of `ieee80211_sta_ps_sleep'

Prevent this configuration by making them all buildable only as
loadable modules (similar to the vt665[56] patch last week).

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-04 22:46:15 -07:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Ilia Mirkin 76be349c00 staging: rtl8187se: Remove NULL check before kfree
This patch was generated by the following semantic patch:
// <smpl>
@@ expression E; @@
- if (E != NULL) { kfree(E); }
+ kfree(E);

@@ expression E; @@
- if (E != NULL) { kfree(E); E = NULL; }
+ kfree(E);
+ E = NULL;
// </smpl>

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-14 11:57:34 -07:00
Xiaochen Wang 0875abf83d staging: rtl8187se: check kmalloc return value
check kmalloc return value

Signed-off-by: Xiaochen Wang <wangxiaochen0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-07 13:46:38 -08:00
Larry Finger f36d83a8cb staging: rtl8187se: Change panic to warn when RF switch turned off
This driver issues a kernel panic over conditions that do not
justify such drastic action. Change these to log entries with
a stack dump.

This patch fixes the system crash reported in
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/674285.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Reported-and-Tested-by: Robie Basik <rb-oss-3@justgohome.co.uk>
Cc: Stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-16 12:25:53 -08:00
Tracey Dent 79ad8cbfb5 Staging: rtl8187se: Makefile: replace the use of <module>-objs with <module>-y
Changed <module>-objs to <module>-y in Makefile.

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-08 07:23:45 -07:00
Tracey Dent 7f1746fecd Staging: rtl8187se: Makefile: cleaned up Makefile cflag lines
Changed to use the proper ccflags-y option

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-05 11:56:39 -07:00
Tracey Dent 3742e3d794 Staging: rtl8187se: r8185b_init: fixed a lot of checkpatch.pl issues
Fixed numerous coding style issues using checkpatch.pl

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-21 10:49:32 -07:00
Tracey Dent de171bd6ff Staging: rtl8187se: r8180_wx: fixed a lot of checkptahc.pl issues
Fixed numerous coding style issues using checkpatch.pl

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-21 10:49:32 -07:00
Tracey Dent 7042b09ad5 Staging: rtl8187se: r8180_rtl8225: fixed a lot of checkpatch.pl issues
Fixed numerous coding style issues using checkpatch.pl

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-21 10:49:32 -07:00
Tracey Dent 33f6c688c9 Staging: rtl8187se: r8180_hw: fixed a lot of checkpatch.pl issues
Fixed numerous coding style issues using checkpatch.pl

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-21 10:49:31 -07:00
Tracey Dent 888b9de56b Staging: rtl8187se: r8180.h: fixed alot of checkpatch.pl issues
Fixed numerous coding style issues

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-21 10:49:31 -07:00
Andre Nogueira 3dc3494ba2 Staging: rtl8186se: Remove a duplicate include directive in ieee80211.h
This patch removes a duplicate include directive in
drivers/staging/rtl8187se/ieee80211/ieee80211.h.

Signed-off-by: Andre Nogueira <andre.neo.net@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-04 21:28:18 -07:00
Stefan Weil 39831861ff Staging: rtl81*: Fix spelling fuction -> function in comments
Obviously the wrong spelling was copied a lot of times.

A similar patch for the non-staging part of linux
is committed by Jiri Kosina.

Cc: devel@driverdev.osuosl.org
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 15:05:13 -07:00
Kulikov Vasiliy beef969724 staging: rtl8187se: call disable_pci_device() if pci_probe() failed
Driver should call disable_pci_device() if it returns from pci_probe()
with error.

Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 14:48:07 -07:00
Rusty Russell dca4130639 param: remove unnecessary writable charp
sysfs-writable charp arguments need to be locked against modification
(since the old ones may be kfreed underneath us).  String arguments
are much simpler, so use them for small strings (eg. IFNAMSIZ).

lkdtm only uses the parameters at module initialization time, so there's
not much point making them writable.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: M. Mohan Kumar <mohan@in.ibm.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Julia Lawall <julia@diku.dk>
Cc: devel@driverdev.osuosl.org
2010-08-11 23:04:27 +09:30
Greg Kroah-Hartman e9563355ac Staging: Merge staging-next into Linus's tree
Conflicts:
	drivers/staging/Kconfig
	drivers/staging/batman-adv/bat_sysfs.c
	drivers/staging/batman-adv/device.c
	drivers/staging/batman-adv/hard-interface.c
	drivers/staging/cx25821/cx25821-audups11.c

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-05 14:18:03 -07:00
Larry Finger f84f927e08 Staging: rtl8187se: Fix compile warnings in 2.6.35-rc2
In commit bbfb5652, the spacing in the definitions of eqMacAddr and cpMacAddr
in drivers/staging/rtl8187se/r8180_core.c were changed to conform to kernel
standards. These definitions were duplicates of lines found in
drivers/staging/rtl8187se/ieee80211/dot11d.h. Once the change was made, the
following warnings were emitted:

  CC [M]  drivers/staging/rtl8187se/r8180_core.o
drivers/staging/rtl8187se/r8180_core.c:69:0: warning: "eqMacAddr" redefined
drivers/staging/rtl8187se/ieee80211/dot11d.h:39:0: note: this is the location of the previous definition
drivers/staging/rtl8187se/r8180_core.c:70:0: warning: "cpMacAddr" redefined
drivers/staging/rtl8187se/ieee80211/dot11d.h:40:0: note: this is the location of the previous definition

The fix is to keep only the difinition in the header file.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-30 08:18:15 -07:00
Andreas Herrmann 0374e91c90 Staging: rtl81xx: Fix build problems when CONFIG_CRYPTO=n
Select CONFIG_CRYPTO for all rtl81xx wireless drivers

... to avoid build problems like:

ERROR: "crypto_destroy_tfm" [drivers/staging/rtl8187se/r8187se.ko] undefined!
ERROR: "crypto_alloc_base" [drivers/staging/rtl8187se/r8187se.ko] undefined!
ERROR: "crypto_destroy_tfm" [drivers/staging/rtl8192u/r8192u_usb.ko] undefined!
ERROR: "crypto_alloc_base" [drivers/staging/rtl8192u/r8192u_usb.ko] undefined!
ERROR: "crypto_destroy_tfm" [drivers/staging/rtl8192su/r8192s_usb.ko] undefined!
ERROR: "crypto_alloc_base" [drivers/staging/rtl8192su/r8192s_usb.ko] undefined!
ERROR: "crypto_destroy_tfm" [drivers/staging/rtl8192e/r8192e_pci.ko] undefined!
ERROR: "crypto_alloc_base" [drivers/staging/rtl8192e/r8192e_pci.ko] undefined!

when drivers are built as modules but CONFIG_CRYPTO=n.

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-18 16:41:50 -07:00
Julia Lawall 94002c07ff Staging: Use kmemdup
Use kmemdup when some other buffer is immediately copied into the
allocated region.

A simplified version of the semantic patch that makes this change is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression from,to,size,flag;
statement S;
@@

-  to = \(kmalloc\|kzalloc\)(size,flag);
+  to = kmemdup(from,size,flag);
   if (to==NULL || ...) S
-  memcpy(to, from, size);
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-17 16:31:15 -07:00
Julia Lawall 7a6cb0d549 Staging: Use kcalloc or kzalloc
Use kcalloc or kzalloc rather than the combination of kmalloc and memset.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression x,y,flags;
statement S;
type T;
@@

x =
-   kmalloc
+   kcalloc
           (
-           y * sizeof(T),
+           y, sizeof(T),
                flags);
 if (x == NULL) S
-memset(x, 0, y * sizeof(T));

@@
expression x,size,flags;
statement S;
@@

-x = kmalloc(size,flags);
+x = kzalloc(size,flags);
 if (x == NULL) S
-memset(x, 0, size);
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
2010-05-14 14:02:56 -07:00
Prashant P. Shah 3f56c109d0 Staging: rtl8187se: fixed C99 comments style issues in r8180_core.c
This is a patch to the r8180_core.c file that fixes the C99 comments
style issues found by the checkpatch.pl tool.

Signed-off-by: Prashant P. Shah <pshah.mumbai@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-14 13:59:51 -07:00
Prashant P. Shah bbfb56520c Staging: rtl8187se: fixed space style issues in r8180_core.c
This is a patch to the r8180_core.c file that fixes the space
style issues found by the checkpatch.pl tool.

Signed-off-by: Prashant P. Shah <pshah.mumbai@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-14 13:58:53 -07:00
Julia Lawall 324148788b Staging: Drop memory allocation cast
Drop cast on the result of kmalloc and similar functions.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
type T;
@@

- (T *)
  (\(kmalloc\|kzalloc\|kcalloc\|kmem_cache_alloc\|kmem_cache_zalloc\|
   kmem_cache_alloc_node\|kmalloc_node\|kzalloc_node\)(...))
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-11 16:06:48 -07:00
John Church cb73da2524 Staging: rtl8187se: fix coding style issues in r8180_core.c
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John Church <j.church@ymail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-11 11:35:54 -07:00
Samuel Ortiz a5e135b1f5 Staging: rtl8187se: Do not mess with carrier settings while scanning
Toggling the link carrier is a non sense and is the grossest locking I can
think of. Moreover, it's giving a completely inaccurate status to userspace
who could for example decide to turn the interface down on carrier off
detection.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-11 11:35:54 -07:00
Samuel Ortiz 592010bb71 Staging: rtl8187se: Do not send NULL BSSID events when not associated
If we're not associated, we should not send wireless events to let userspace
know that we just left an ESSID, simply because we havent yet joined it.
If we keep on doing that, wpa_supplicant could receive such events while
actually trying to join an ESSID, and thus decide to stop trying. This leads
to a lot of connection failures as this driver seems to be sending GIWAP
events quite a lot.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-11 11:35:54 -07:00
Samuel Ortiz 3eec314fb2 Staging: rtl8187se: Do not autoconnect based on probe response
Getting a probe response after sending a probe request to a specific SSID
doesnt mean we're trying to associate with this SSID.
wpa_supplicant should be the only one deciding when to join an SSID, not the
kernel.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-11 11:35:54 -07:00
Olimpiu Pascariu 593ef41c95 Staging: rtl8187se: fixed checkpatch.pl warnings and errors in r8180_rtl8225z2.c
This is a patch to the r8180_rtl8225z2.c file that fixes up errors and
warnings found by the checkpatch.pl tool

Signed-off-by: Olimpiu Pascariu <olimpiu.pascariu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-11 11:35:54 -07:00
Joe Perches 53756de383 Staging: rtl8187se: Hoist assign from if
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-11 11:35:44 -07:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Greg Kroah-Hartman f341dddf1d Staging: merge staging patches into Linus's main branch
There were a number of patches that went into Linus's
tree already that conflicted with other changes in the
staging branch.  This merge resolves those merge conflicts.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-04 08:39:02 -08:00
Randy Dunlap a94f530a5e Staging: rtl8187se: needs semaphore.h
rtl8187se needs to include semaphore.h to prevent build errors:

drivers/staging/rtl8187se/ieee80211/ieee80211.h:1004: error: field 'wx_sem' has incomplete type
drivers/staging/rtl8187se/ieee80211/ieee80211.h:1005: error: field 'scan_sem' has incomplete type

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03 16:43:00 -08:00
Larry Finger cd18964a1d Staging: r8187se: Remove dead code from r8185b_init.c
Remove dead code from r8185b_init.c.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03 16:42:59 -08:00
Larry Finger 8daba6b94d Staging: r8187se: Remove two private variables that have a fixed value
For the RTL8187SE, the variable priv->rf_chip is always RF_ZEBRA4
and priv->RegThreeWireMode is always HW_THREE_WIRE_SI. Remove these
2 variables.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03 16:42:59 -08:00
Larry Finger b1b7621b08 staging: r8187se: Remove write_phy routine
Remove a routine that is not used.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03 16:42:58 -08:00
Larry Finger 6de92dd649 Staging: r8187se: Fix for LED not following radio switch
The current driver does not follow the state of the RF switch.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03 16:42:58 -08:00
Larry Finger 742821ce5f staging: r8187se: Change to use common eeprom routines in EEPROM_93CX
The TODO list includes switching this driver to use the common EEPROM
routines in EEPROM_93CX.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Tested by: Bernhard Schiffner <bernhard@schiffner-limbach.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03 16:42:57 -08:00
Joe Perches bc56894234 Staging: Fix continuation line formats
String constants that are continued on subsequent lines with \
are not good.
Fixed a "is tryied" / tried typo

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03 16:42:54 -08:00
Larry Finger 1994130e4f Staging: r8187se: Fix a faulty if and do additional cleanups
Cleanup the driver and fix a faulty if statement.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Tested by: Bernhard Schiffner <bernhard@schiffner-limbach.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03 16:42:53 -08:00
Dan Carpenter cffd4e16cd Staging: rtl8187se: fix if statement
I removed a misplace semicolon.  It is clear from the indentation that
TxPwrTracking87SE() was only supposed to be called if CheckTxPwrTracking()
returned true.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03 16:42:48 -08:00
Uwe Kleine-König 1832664ae1 staging: fix typos "enalbe" -> "enable"
This patch was generated by

	git grep -E -l 'enalbe' drivers/staging | xargs -r perl -p -i -e 's/enalbe/enable/g'

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03 16:42:44 -08:00
Joe Perches 0ee9f67c40 Staging: rtl8187x: Use %pM for mac address output
Uncompiled.  Doesn't currently build anyway.

Converted MAC_FMT to %pM
Converted some %02x%02x%02x%02x%02x%02x to %pm
Converted MAC_ARG to direct use
Removed MAC_FMT and MAC_ARG macros

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03 16:42:29 -08:00
David S. Miller 6373464288 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
Conflicts:
	drivers/net/wireless/iwlwifi/iwl-core.h
2010-01-19 11:43:42 -08:00
Larry Finger b6b1ac6937 Staging: r8187se: Fix compile error from wireless-testing commit 7044cc56
In wireless-testing, commit 7044cc56 added struct ieee80211_hdr_3addr
to include/linux/ieee80211.h. This definition collides with one that is
in the r8187se driver in staging.

The conflict is resolved by changing r8187se to use the definition from
include/linuc/ieee80211.h.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-14 18:16:57 -05:00
George Kadianakis df574b8ecf Staging: fix rtl8187se compilation errors with mac80211
This patch fixes compilation problems that were caused by function
naming conflicts between the rtl8187se driver and the mac80211 stack.

Signed-off-by: George Kadianakis <desnacked at gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23 11:27:46 -08:00
Larry Finger ad988ba5c0 Staging: rtl8187se: Rename staging driver to avoid name conflict with mainline driver
Now that active development has begun on a mainline version of
a driver for the RTL8187SE that should be called rtl8187se, there
is a conflict with the driver in staging with the same name.

To solve the conflict, rename the driver in staging to r8187se.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11 12:23:20 -08:00
Larry Finger 8eee44dafd Staging: rtl8187se: Remove card_type
The vendor-written driver for the RTL8187SE has a private variable
for the card type, even though it only occurs in PCI format.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11 12:23:20 -08:00
Larry Finger d44eb889cc Staging: rtl8187se: Remove card8185 variable to simplify flow
When this code is used for the rtl8187se, the value of card_8185
in struct r8180_priv is always 7 or 8. As a result, the program
flow can be simplified.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Tested-by: Bernhard Schiffner <bernhard@schiffner-limbach.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11 12:23:20 -08:00