Граф коммитов

263 Коммитов

Автор SHA1 Сообщение Дата
Alexander A. Klimov ffeb1e9e89 USB: Replace HTTP links with HTTPS ones
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
	  If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
            If both the HTTP and HTTPS versions
            return 200 OK and serve the same content:
              Replace HTTP with HTTPS.

Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200719160910.60018-1-grandmaster@al2klimov.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-21 13:41:57 +02:00
Linus Torvalds b23c4771ff A fair amount of stuff this time around, dominated by yet another massive
set from Mauro toward the completion of the RST conversion.  I *really*
 hope we are getting close to the end of this.  Meanwhile, those patches
 reach pretty far afield to update document references around the tree;
 there should be no actual code changes there.  There will be, alas, more of
 the usual trivial merge conflicts.
 
 Beyond that we have more translations, improvements to the sphinx
 scripting, a number of additions to the sysctl documentation, and lots of
 fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl7VId8PHGNvcmJldEBs
 d24ubmV0AAoJEBdDWhNsDH5Yq/gH/iaDgirQZV6UZ2v9sfwQNYolNpf2sKAuOZjd
 bPFB7WJoMQbKwQEvYrAUL2+5zPOcLYuIfzyOfo1BV1py+EyKbACcKjI4AedxfJF7
 +NchmOBhlEqmEhzx2U08HRc4/8J223WG17fJRVsV3p+opJySexSFeQucfOciX5NR
 RUCxweWWyg/FgyqjkyMMTtsePqZPmcT5dWTlVXISlbWzcv5NFhuJXnSrw8Sfzcmm
 SJMzqItv3O+CabnKQ8kMLV2PozXTMfjeWH47ZUK0Y8/8PP9+cvqwFzZ0UDQJ1Xaz
 oyW/TqmunaXhfMsMFeFGSwtfgwRHvXdxkQdtwNHvo1dV4dzTvDw=
 =fDC/
 -----END PGP SIGNATURE-----

Merge tag 'docs-5.8' of git://git.lwn.net/linux

Pull documentation updates from Jonathan Corbet:
 "A fair amount of stuff this time around, dominated by yet another
  massive set from Mauro toward the completion of the RST conversion. I
  *really* hope we are getting close to the end of this. Meanwhile,
  those patches reach pretty far afield to update document references
  around the tree; there should be no actual code changes there. There
  will be, alas, more of the usual trivial merge conflicts.

  Beyond that we have more translations, improvements to the sphinx
  scripting, a number of additions to the sysctl documentation, and lots
  of fixes"

* tag 'docs-5.8' of git://git.lwn.net/linux: (130 commits)
  Documentation: fixes to the maintainer-entry-profile template
  zswap: docs/vm: Fix typo accept_threshold_percent in zswap.rst
  tracing: Fix events.rst section numbering
  docs: acpi: fix old http link and improve document format
  docs: filesystems: add info about efivars content
  Documentation: LSM: Correct the basic LSM description
  mailmap: change email for Ricardo Ribalda
  docs: sysctl/kernel: document unaligned controls
  Documentation: admin-guide: update bug-hunting.rst
  docs: sysctl/kernel: document ngroups_max
  nvdimm: fixes to maintainter-entry-profile
  Documentation/features: Correct RISC-V kprobes support entry
  Documentation/features: Refresh the arch support status files
  Revert "docs: sysctl/kernel: document ngroups_max"
  docs: move locking-specific documents to locking/
  docs: move digsig docs to the security book
  docs: move the kref doc into the core-api book
  docs: add IRQ documentation at the core-api book
  docs: debugging-via-ohci1394.txt: add it to the core-api book
  docs: fix references for ipmi.rst file
  ...
2020-06-01 15:45:27 -07:00
Andrey Konovalov 61d2658db4 usb: raw-gadget: documentation updates
Mention the issue with fixed UDC addresses.

Links external examples and test suite.

Add more implmenetation details and potential improvements.

Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-05-14 12:30:18 +03:00
Andrey Konovalov c61769bd47 usb: raw-gadget: support stalling/halting/wedging endpoints
Raw Gadget is currently unable to stall/halt/wedge gadget endpoints,
which is required for proper emulation of certain USB classes.

This patch adds a few more ioctls:

- USB_RAW_IOCTL_EP0_STALL allows to stall control endpoint  when
  there's a pending setup request for it.
- USB_RAW_IOCTL_SET/CLEAR_HALT/WEDGE allow to set/clear halt/wedge status
  on non-control non-isochronous endpoints.

Fixes: f2c2e71764 ("usb: gadget: add raw-gadget interface")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-05-14 12:30:18 +03:00
Andrey Konovalov 97df5e5758 usb: raw-gadget: fix gadget endpoint selection
Currently automatic gadget endpoint selection based on required features
doesn't work. Raw Gadget tries iterating over the list of available
endpoints and finding one that has the right direction and transfer type.
Unfortunately selecting arbitrary gadget endpoints (even if they satisfy
feature requirements) doesn't work, as (depending on the UDC driver) they
might have fixed addresses, and one also needs to provide matching
endpoint addresses in the descriptors sent to the host.

The composite framework deals with this by assigning endpoint addresses
in usb_ep_autoconfig() before enumeration starts. This approach won't work
with Raw Gadget as the endpoints are supposed to be enabled after a
set_configuration/set_interface request from the host, so it's too late to
patch the endpoint descriptors that had already been sent to the host.

For Raw Gadget we take another approach. Similarly to GadgetFS, we allow
the user to make the decision as to which gadget endpoints to use.

This patch adds another Raw Gadget ioctl USB_RAW_IOCTL_EPS_INFO that
exposes information about all non-control endpoints that a currently
connected UDC has. This information includes endpoints addresses, as well
as their capabilities and limits to allow the user to choose the most
fitting gadget endpoint.

The USB_RAW_IOCTL_EP_ENABLE ioctl is updated to use the proper endpoint
validation routine usb_gadget_ep_match_desc().

These changes affect the portability of the gadgets that use Raw Gadget
when running on different UDCs. Nevertheless, as long as the user relies
on the information provided by USB_RAW_IOCTL_EPS_INFO to dynamically
choose endpoint addresses, UDC-agnostic gadgets can still be written with
Raw Gadget.

Fixes: f2c2e71764 ("usb: gadget: add raw-gadget interface")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-05-14 12:30:17 +03:00
Mauro Carvalho Chehab 982649915d docs: filesystems: convert configfs.txt to ReST
- Add a SPDX header;
- Adjust document and section titles;
- Use copyright symbol;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add it to filesystems/index.rst.

Also, as this file is alone on its own dir, and it doesn't
seem too likely that other documents will follow it, let's
move it to the filesystems/ root documentation dir.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/c2424ec2ad4d735751434ff7f52144c44aa02d5a.1588021877.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-05-05 09:23:25 -06:00
Andrey Konovalov f2c2e71764 usb: gadget: add raw-gadget interface
USB Raw Gadget is a kernel module that provides a userspace interface for
the USB Gadget subsystem. Essentially it allows to emulate USB devices
from userspace. Enabled with CONFIG_USB_RAW_GADGET. Raw Gadget is
currently a strictly debugging feature and shouldn't be used in
production.

Raw Gadget is similar to GadgetFS, but provides a more low-level and
direct access to the USB Gadget layer for the userspace. The key
differences are:

1. Every USB request is passed to the userspace to get a response, while
   GadgetFS responds to some USB requests internally based on the provided
   descriptors. However note, that the UDC driver might respond to some
   requests on its own and never forward them to the Gadget layer.

2. GadgetFS performs some sanity checks on the provided USB descriptors,
   while Raw Gadget allows you to provide arbitrary data as responses to
   USB requests.

3. Raw Gadget provides a way to select a UDC device/driver to bind to,
   while GadgetFS currently binds to the first available UDC.

4. Raw Gadget uses predictable endpoint names (handles) across different
   UDCs (as long as UDCs have enough endpoints of each required transfer
   type).

5. Raw Gadget has ioctl-based interface instead of a filesystem-based one.

Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-03-15 11:34:48 +02:00
Mauro Carvalho Chehab 1edca3c64e docs: usb: remove some broken references
It seems that some files were removed from USB documentation.

Update the links accordingly.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/00008303fde6b4e06d027d3b76ae7032614a7030.1580193653.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-01-28 13:41:22 -07:00
Bastien Nocera 015664d152 USB: rio500: Remove Rio 500 kernel driver
The Rio500 kernel driver has not been used by Rio500 owners since 2001
not long after the rio500 project added support for a user-space USB stack
through the very first versions of usbdevfs and then libusb.

Support for the kernel driver was removed from the upstream utilities
in 2008:
943f624ab7

Cc: Cesar Miquel <miquel@df.uba.ar>
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/6251c17584d220472ce882a3d9c199c401a51a71.camel@hadess.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04 10:53:36 +02:00
Greg Kroah-Hartman 71ed79b0e4 USB: Move wusbcore and UWB to staging as it is obsolete
The UWB and wusbcore code is long obsolete, so let us just move the code
out of the real part of the kernel and into the drivers/staging/
location with plans to remove it entirely in a few releases.

Link: https://lore.kernel.org/r/20190806101509.GA11280@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-08 07:52:01 +02:00
Mauro Carvalho Chehab ecefae6db0 docs: usb: rename files to .rst and add them to drivers-api
While there are a mix of things here, most of the stuff
were written from Kernel developer's PoV. So, add them to
the driver-api book.

A follow up for this patch would be to move documents from
there that are specific to sysadmins, adding them to the
admin-guide.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-20 14:28:36 +02:00
Oliver Neukum 53c7b63f79 USB: rio500: update Documentation
Added the newly added limit and updated the text a bit

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:11:19 +02:00
Mauro Carvalho Chehab d80b5005c5 docs: usb: convert documents to ReST
Convert USB documents to ReST, in order to prepare for adding it
to the kernel API book, as most of the stuff there are driver or
subsystem-related.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-16 12:16:19 +02:00
Dmitry Torokhov 7bae0432a6 usb: core: add option of only authorizing internal devices
On Chrome OS we want to use USBguard to potentially limit access to USB
devices based on policy. We however to do not want to wait for userspace to
come up before initializing fixed USB devices to not regress our boot
times.

This patch adds option to instruct the kernel to only authorize devices
connected to the internal ports. Previously we could either authorize
all or none (or, by default, we'd only authorize wired devices).

The behavior is controlled via usbcore.authorized_default command line
option.

Signed-off-by: Dmitry Torokhov <dtor@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-22 09:27:55 +01:00
Thiébaud Weksteen 77df6d8d72 Documentation/usb: Fix typo
Fix small typo authroized -> authorized in the authorization page.

Signed-off-by: Thiébaud Weksteen <tweek@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-26 16:56:34 +01:00
Greg Kroah-Hartman 78fbe864c3 USB-serial updates for v4.19-rc1
Here are the USB-serial updates for 4.19-rc1, including:
 
  - gpio support for CP2102N devices
  - improved line-speed handling for cp210x
  - conversion to spin_lock_irqsave() in completion handlers
  - dropped kl5kusb105 support from the kl5kusb105 driver (sic!)
 
 Included are also various lower-priority fixes and clean ups.
 
 All but the final commit have been in linux-next, and with no reported
 issues.
 
 Signed-off-by: Johan Hovold <johan@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEHszNKQClByu0A+9RQQ3kT97htJUFAltSEpQRHGpvaGFuQGtl
 cm5lbC5vcmcACgkQQQ3kT97htJUXJA//UaE1M6D5LefGKEitn1CMMqaCxc6M4U/y
 PyuGnGds22VXYgscQlur++bhetJ12qGWoo8r1IOl4QgZl5dWOISx19F5kgMXBMr7
 GKEPraRCdxCvZ4RSKbjinlUIjFBij131doI2NIOP6lVdbnwA+z0fX5OH6zAf61p2
 Tr/aNyJmN2eIJJx+ez7PszEB3pczWNpv7uP7tmoZ/cmyLdpRYYJzsaSv4I0KA4dz
 d87IQ9G2eG1BGbs3cYN7fUwwNhcsKG7wfonXMfQPEENdyPWdle7sh/EiubRlquv4
 I7xs8+E5zDKChrwavbMQr4uCmXf3L1O7Ueev9718pHzYkQTfxiCvAqt6nhlmkyEx
 yZdo3DncTMGT3A8/MZk3C66I30xul8z7BH2X0DVXr8yeV4ZN17u7F65Qzyr5Tmni
 aUYPXaov6JuyLtIBNii3cXMtMuG9ghJoEbXZ2U9DcCFuYeDW6xJuTUd0sKmctTWa
 htXgW9lvndw0C3ojTXgp6dT2KQyEYhKDM6qdgVhoZV2x4M2XErEMSxTTIm0nlG7O
 dnrIT3q+iqarxU4vBC6doOq7vbQP5L7UPfpYJcD/AqMvjLX0ZEFInKz+eI2KLUg0
 MM8DatTs6z80lClKfKmpNw/bWWcUdKyH9acFXvjrflwwMU2hqsJB9RcsN0d4ppNL
 QtaT/uY6zls=
 =0ukW
 -----END PGP SIGNATURE-----

Merge tag 'usb-serial-4.19-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next

Johan writes:

USB-serial updates for v4.19-rc1

Here are the USB-serial updates for 4.19-rc1, including:

 - gpio support for CP2102N devices
 - improved line-speed handling for cp210x
 - conversion to spin_lock_irqsave() in completion handlers
 - dropped kl5kusb105 support from the kl5kusb105 driver (sic!)

Included are also various lower-priority fixes and clean ups.

All but the final commit have been in linux-next, and with no reported
issues.

Signed-off-by: Johan Hovold <johan@kernel.org>
2018-07-20 21:47:15 +02:00
Johan Hovold 3738c50665 USB: serial: clean up kl5kusb105 documentation
Remove references to long-gone kl5kusb105 module parameters in the
usb-serial documentation.

Signed-off-by: Johan Hovold <johan@kernel.org>
2018-07-11 10:14:06 +02:00
Jaejoong Kim 3ec148ebe3 doc: usb: Fix typo in gadget_configfs documentation
Fix the directory name from 'configfs' to 'configs'.

Signed-off-by: Jaejoong Kim <climbbb.kim@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-06-18 12:41:00 +03:00
Greg Kroah-Hartman c182ce9bc8 Merge 4.15-rc8 into usb-next
We want the USB fixes in here as well for merge issues.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-15 15:00:11 +01:00
Bin Liu 1a2e91e795 Documentation: usb: fix typo in UVC gadgetfs config command
This seems to be a copy&paste error. With the fix the uvc gadget now can
be created by following the instrucitons.

Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-11 18:39:52 +01:00
Alan Stern aa15d3d257 USB: remove the URB_NO_FSBR flag
The URB_NO_FSBR flag has never really been used.  It was introduced as
a potential way for UHCI to minimize PCI bus usage (by not attempting
full-speed bulk and control transfers more than once per frame), but
the flag was not set by any drivers.

There's no point in keeping it around.  This patch simplifies the API
by removing it.  Unfortunately, it does have to be kept as part of the
usbfs ABI, but at least we can document in
include/uapi/linux/usbdevice_fs.h that it doesn't do anything.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-12 13:16:07 +01:00
Fabio Estevam 16e791e765 doc: usb: chipidea: Fix typo in 'enumerate'
Fix the spelling of 'enumerate' in this document.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-08 17:43:53 +01:00
Tom Saeger 4269a69110 Documentation: fix usb related doc refs
Update ref to usb proc_usb_info.txt.

Signed-off-by: Tom Saeger <tom.saeger@oracle.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-10-12 11:15:48 -06:00
Ruslan Bilovol 0591bc2360 usb: gadget: add f_uac1 variant based on a new u_audio api
This patch adds a new function 'f_uac1'
(f_uac1 with virtual "ALSA card") that
uses recently created u_audio API. Comparing
to legacy f_uac1 function implementation it
doesn't require any real Audio codec to be
present on the device. In f_uac1 audio
streams are simply sinked to and sourced
from a virtual ALSA sound card created
using u_audio API.

Legacy f_uac1 approach is to write audio
samples directly to existing ALSA sound
card

f_uac1 approach is more generic/flexible
one - create an ALSA sound card that
represents USB Audio function and allows to
be used by userspace application that
may choose to do whatever it wants with the
data received from the USB Host and choose
to provide whatever it wants as audio data
to the USB Host.

f_uac1 also has capture support (gadget->host)
thanks to easy implementation via u_audio.
By default, capture interface has 48000kHz/2ch
configuration, same as playback channel has.

f_uac1 descriptors naming convention
uses f_uac2 driver naming convention that
makes it more common and meaningful.

Comparing to f_uac1_legacy, the f_uac1 doesn't
have volume/mute functionality. This is because
the f_uac1 volume/mute feature unit was dummy
implementation since that driver creation (2009)
and never had any real volume control or mute
functionality, so there is no any difference
here.

Since f_uac1 functionality, exposed
interface to userspace (virtual ALSA card),
input parameters are so different comparing
to f_uac1_legacy, that there is no any
reason to keep them in the same file/module,
and separate function was created.

g_audio can be built using one of existing
UAC functions (f_uac1, f_uac1_legacy or f_uac2)

Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-06-19 09:22:47 +03:00
Ruslan Bilovol d355339eec usb: gadget: function: make current f_uac1 implementation legacy
Before introducing new f_uac1 function (with virtual
ALSA card) make current implementation legacy.

This includes renaming of existing files, some
variables, config options and documentation

Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-06-19 09:22:47 +03:00
Felipe Balbi b0b3ddf8fb usb: move ReST documentation to Documentation/driver-api/usb/
This is where all other USB ReST documentation has moved to.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-06-02 11:22:30 +03:00
Linus Torvalds 8f28472a73 USB patches for 4.12-rc1
Here is the big USB patchset for 4.12-rc1.
 
 Lots of good stuff here, after many many many attempts, the kernel
 finally has a working typeC interface, many thanks to the Heikki and
 Guenter and others who have taken the time to get this merged.  It
 wasn't an easy path for them at all.
 
 There's also a staging driver that uses this new api, which is why it's
 coming in through this tree.
 
 Along with that, there's the usual huge number of changes for gadget
 drivers, xhci, and other stuff.  Johan also finally refactored pretty
 much every driver that was looking at USB endpoints to do it in a common
 way, which will help prevent any "badly-formed" devices from causing
 problems in drivers.  That too wasn't a simple task.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWQvEIQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yny4gCePCXxnrQdMWE+IMXf1H1hMubLkVkAn0ZWgQkq
 BspgO7ZmGb+9Fpf6YvNz
 =nwAu
 -----END PGP SIGNATURE-----

Merge tag 'usb-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB updates from Greg KH:
 "Here is the big USB patchset for 4.12-rc1.

  Lots of good stuff here, after many many many attempts, the kernel
  finally has a working typeC interface, many thanks to Heikki and
  Guenter and others who have taken the time to get this merged. It
  wasn't an easy path for them at all.

  There's also a staging driver that uses this new api, which is why
  it's coming in through this tree.

  Along with that, there's the usual huge number of changes for gadget
  drivers, xhci, and other stuff. Johan also finally refactored pretty
  much every driver that was looking at USB endpoints to do it in a
  common way, which will help prevent any "badly-formed" devices from
  causing problems in drivers. That too wasn't a simple task.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits)
  staging: typec: Fairchild FUSB302 Type-c chip driver
  staging: typec: Type-C Port Controller Interface driver (tcpci)
  staging: typec: USB Type-C Port Manager (tcpm)
  usb: host: xhci: remove #ifdef around PM functions
  usb: musb: don't mark of_dev_auxdata as initdata
  usb: misc: legousbtower: Fix buffers on stack
  USB: Revert "cdc-wdm: fix "out-of-sync" due to missing notifications"
  usb: Make sure usb/phy/of gets built-in
  USB: storage: e-mail update in drivers/usb/storage/unusual_devs.h
  usb: host: xhci: print correct command ring address
  usb: host: xhci: delete sp_dma_buffers for scratchpad
  usb: host: xhci: using correct specification chapter reference for DCBAAP
  xhci: switch to pci_alloc_irq_vectors
  usb: host: xhci-plat: set resume_quirk() for R-Car controllers
  usb: host: xhci-plat: add resume_quirk()
  usb: host: xhci-plat: enable clk in resume timing
  usb: host: plat: Enable xHCI plat runtime PM
  USB: serial: ftdi_sio: add device ID for Microsemi/Arrow SF2PLUS Dev Kit
  USB: serial: constify static arrays
  usb: fix some references for /proc/bus/usb
  ...
2017-05-04 18:03:51 -07:00
Linus Torvalds c58d4055c0 A reasonably busy cycle for documentation this time around. There is a new
guide for user-space API documents, rather sparsely populated at the
 moment, but it's a start.  Markus improved the infrastructure for
 converting diagrams.  Mauro has converted much of the USB documentation
 over to RST.  Plus the usual set of fixes, improvements, and tweaks.
 
 There's a bit more than the usual amount of reaching out of Documentation/
 to fix comments elsewhere in the tree; I have acks for those where I could
 get them.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZB1elAAoJEI3ONVYwIuV6wUIQAJSM/4rNdj6z+GXeWhRfbsOo
 vqqVYluvXQIJaaqdsy9dgcfThhOXWYsPyVF6Xd+bDJpwF3BMZYbX1CI1Mo3kRD+7
 9+Pf68cYSHRoU3l/sFI8q0zfKbHtmFteIvnRQoFtRaExqgTR8glUfxNDyN9XuNAZ
 3naS4qMZivM4gjMcSpIB/wFOQpV+6qVIs6VTFLdCC8wodT3W/Wmb+bqrCVJ0twbB
 t8jJeYHt2wsiTdqrKU+VilAUAZ1Lby+DNfeWrO18rC1ohktPyUzOGg8JmTKUBpVO
 qj1OJwD6abuaNh/J9bXsh8u0OrVrBKWjVrhq9IFYDlm92fu3Bgr6YeoaVPEpcklt
 jdlgZnWs9/oXa6d32aMc9F7mP9a0Q1qikFTYINhaHQZCb4VDRuQ9hCSuqWm5jlVy
 lmVAoxLa0zSdOoXaYuO3HC99ku1cIn814CXMDz/IwKXkqUCV+zl+H3AGkvxGyQ5M
 eblw2TnQnc6e1LRcxt5bgpFR1JYMbCJhu0U5XrNFueQV8ReB15dvL7h4y21dWJKF
 2Sr83rwfG1rpZQiSqCjOXxIzuXbEGH3+a+zCDV5IHhQRt/VNDOt2hgmcyucSSJ5h
 5GRFYgTlGvoT/6LdIT39QooHB+4tSDRtEQ6lh0q2ZtVV2rfG/I6/PR5sUbWM65SN
 vAfctRm2afHLhdonSX5O
 =41m+
 -----END PGP SIGNATURE-----

Merge tag 'docs-4.12' of git://git.lwn.net/linux

Pull documentation update from Jonathan Corbet:
 "A reasonably busy cycle for documentation this time around. There is a
  new guide for user-space API documents, rather sparsely populated at
  the moment, but it's a start. Markus improved the infrastructure for
  converting diagrams. Mauro has converted much of the USB documentation
  over to RST. Plus the usual set of fixes, improvements, and tweaks.

  There's a bit more than the usual amount of reaching out of
  Documentation/ to fix comments elsewhere in the tree; I have acks for
  those where I could get them"

* tag 'docs-4.12' of git://git.lwn.net/linux: (74 commits)
  docs: Fix a couple typos
  docs: Fix a spelling error in vfio-mediated-device.txt
  docs: Fix a spelling error in ioctl-number.txt
  MAINTAINERS: update file entry for HSI subsystem
  Documentation: allow installing man pages to a user defined directory
  Doc/PM: Sync with intel_powerclamp code behavior
  zr364xx.rst: usb/devices is now at /sys/kernel/debug/
  usb.rst: move documentation from proc_usb_info.txt to USB ReST book
  convert philips.txt to ReST and add to media docs
  docs-rst: usb: update old usbfs-related documentation
  arm: Documentation: update a path name
  docs: process/4.Coding.rst: Fix a couple of document refs
  docs-rst: fix usb cross-references
  usb: gadget.h: be consistent at kernel doc macros
  usb: composite.h: fix two warnings when building docs
  usb: get rid of some ReST doc build errors
  usb.rst: get rid of some Sphinx errors
  usb/URB.txt: convert to ReST and update it
  usb/persist.txt: convert to ReST and add to driver-api book
  usb/hotplug.txt: convert to ReST and add to driver-api book
  ...
2017-05-02 10:21:17 -07:00
Mauro Carvalho Chehab 96801b35f0 usb.rst: move documentation from proc_usb_info.txt to USB ReST book
The contents of proc_usb_info.txt complements what's there at
driver-api usb book. Yet, it is outdated, as it still refers
to the USB character devices as usbfs.

So, move the contents to usb.rst, adjusting it to point to
the right places.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-04-20 15:31:26 -06:00
Mauro Carvalho Chehab 8a6a285d61 docs-rst: usb: update old usbfs-related documentation
There's no usbfs anymore. The old features are now either
exported to /dev/bus/usb or via debugfs.

Update documentation accordingly, pointing to the new
places where the character devices and usb/devices are
now placed.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-04-20 15:30:33 -06:00
Mauro Carvalho Chehab e463c06335 usb/URB.txt: convert to ReST and update it
The URB doc describes the Kernel mechanism that do USB transfers.
While the functions are already described at urb.h, there are a
number of concepts and theory that are important for USB driver
developers.

Convert it to ReST and use C ref links to point to the places
at usb.h where each function and struct is located.

A few of those descriptions were incomplete. While here, update
to reflect the current API status.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-04-11 14:40:25 -06:00
Mauro Carvalho Chehab 32a3bebce9 usb/persist.txt: convert to ReST and add to driver-api book
This document describe some USB core features. Add it to the
driver-api book.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-04-11 14:40:12 -06:00
Mauro Carvalho Chehab 76f650f077 usb/hotplug.txt: convert to ReST and add to driver-api book
This document describe some USB core features. Add it to the
driver-api book.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-04-11 14:40:01 -06:00
Mauro Carvalho Chehab 360a7b5f57 error-codes.rst: convert to ReST and add to driver-api book
This document describe some USB core features. Add it to the
driver-api book.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-04-11 14:39:49 -06:00
Mauro Carvalho Chehab 2a373331dd usb/dma.txt: convert to ReST and add to driver-api book
This document describe some USB core features. Add it to the
driver-api book.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-04-11 14:39:36 -06:00
Mauro Carvalho Chehab 3db5f406e4 usb/power-management.txt: convert to ReST and add to driver-api book
This document describe some USB core functions. Add it to the
driver-api book.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-04-11 14:39:20 -06:00
Mauro Carvalho Chehab 3b38e4f218 usb/callbacks.txt: convert to ReST and add to driver-api book
This document describe some USB core functions. Add it to the
driver-api book.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-04-11 14:39:08 -06:00
Mauro Carvalho Chehab 401c7be2ba usb/bulk-streams.txt: convert to ReST and add to driver-api book
This document describe some USB core functions. Add it to the
driver-api book.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-04-11 14:38:56 -06:00
Mauro Carvalho Chehab 79e0c2e6d4 usb/anchors.txt: convert to ReST and add to driver-api book
This document describe some USB core functions. Add it to the
driver-api book.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-04-11 14:38:44 -06:00
Heikki Krogerus fab9288428 usb: USB Type-C connector class
The purpose of USB Type-C connector class is to provide
unified interface for the user space to get the status and
basic information about USB Type-C connectors on a system,
control over data role swapping, and when the port supports
USB Power Delivery, also control over power role swapping
and Alternate Modes.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-and-Tested-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-23 13:48:44 +01:00
Lu Baolu 1b32627779 usb/doc: Add document for USB3 debug port usage
Add Documentation/usb/usb3-debug-port.rst. This document includes
the guide for using USB3 debug port.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Link: http://lkml.kernel.org/r/1490083293-3792-6-git-send-email-baolu.lu@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-21 12:30:17 +01:00
Linus Torvalds c1aac62f36 A slightly quieter cycle for documentation this time around.
Three more DocBook template files have been converted to RST; only 21 to
 go.  There are various build improvements and the usual array of
 documentation improvements and fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJYriFXAAoJEI3ONVYwIuV6iTMP/iV7ownq9IK1f8askcXKM76i
 NoRdj4/JywAPQ73vLhOSDVELGdVJNRBjdyOdBRzxPgsqAhFmm79lVYV2eLIffQ2k
 7LcVbEQR77I+4z9SwqIVbIWNCBry7Hu8aWh7moDL3I6yeuay408yr5YW2lIlsqHZ
 V/LZgkTWDe+iQPeXNA4Djzylx0lcRlAy4yMSLjN1+gb9/uBnXb9J0eGJzgfZfrL8
 fiIhymg3bv8vB99l6LMR5vT343QLWXf1yS31A7rPQvwkDo6zFehUJA0XNfIsl2dw
 VQYsvl9vp9wy3e6Y0qKXPn1XhAhCrm64P3crBxK31MMvcKZVCfeRSZ78wrvpvewy
 MVLlXdqop1bHPHowtRfA5jwxr1NqcYp+Jg0+YGX3iXpPi1Jfk36DNUy9iWvtvIzr
 lWgQcIKsdCwwYUcvPR8Kt8T/3q/AHbYlI6mimWlkmbZwncQcgCrH5xSG+c2BIPfV
 fn3W6eLHBn8RyVsxlaXlA0Y9TNtI/Cm85b3Ri10pFvhl868ppWfJxXHi7UtcbU58
 sQzahISCTXOH/NQwkkh7kFMtczbB43rAcChvF7EUYpazVBpJ4P4HxKFg3eIzIdc6
 VlBSaMu1hxUGoYxNNYuKr/nYstuczLOKzK7q4j/JOExY3RgTWP+T3bF02wgubvoa
 D/9WfScewkgCJRoA7i17
 =C5nd
 -----END PGP SIGNATURE-----

Merge tag 'docs-4.11' of git://git.lwn.net/linux

Pull documentation updates from Jonathan Corbet:
 "A slightly quieter cycle for documentation this time around.

  Three more DocBook template files have been converted to RST; only 21
  to go. There are various build improvements and the usual array of
  documentation improvements and fixes"

* tag 'docs-4.11' of git://git.lwn.net/linux: (44 commits)
  docs / driver-api: Fix structure references in device_link.rst
  PM / docs: Fix structure references in device.rst
  Add a target to check broken external links in the Documentation
  Documentation: Fix linux-api list typo
  Documentation: DocBook/Makefile comment typo
  Improve sparse documentation
  Documentation: make Makefile.sphinx no-ops quieter
  Documentation: DMA-ISA-LPC.txt
  Documentation: input: fix path to input code definitions
  docs: Remove the copyright year from conf.py
  docs: Fix a warning in the Korean HOWTO.rst translation
  PM / sleep / docs: Convert PM notifiers document to reST
  PM / core / docs: Convert sleep states API document to reST
  PM / core: Update kerneldoc comments in pm.h
  doc-rst: Fix recursive make invocation from macros
  doc-rst: Delete output of failed dot-SVG conversion
  doc-rst: Break shell command sequences on failure
  Documentation/sphinx: make targets independent of Sphinx work for HAVE_SPHINX=0
  doc-rst: fixed cleandoc target when used with O=dir
  Documentation/sphinx: prevent generation of .pyc files in the source tree
  ...
2017-02-22 18:51:29 -08:00
Masanari Iida 8da9704c8b Doc: Fix double words in Documentation
This patch fix some double words found in Documentation.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-01-26 15:25:41 -07:00
Peter Chen e92b9d449d usb: gadget: uac2: add req_number as parameter
There are only two requests for uac2, it may not be enough at high
loading system which usb interrupt handler can't be serviced on
time, then the data will be lost since it is isoc transfer for audio.

In this patch, we introduce a parameter for the number for usb request,
and the user can override it if current number for request is not enough
for his/her use case.

Besides, update this parameter for legacy audio gadget and documentation.

Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-24 11:04:21 +02:00
Michal Nazarewicz 072baa0371 Documentation: tiny typo fix in usb/gadget_multi.txt
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-06-23 08:09:10 -06:00
Greg Kroah-Hartman 792f7525ac Hi Greg, below are changes for chipidea and OTG FSM, no major changes.
Some for documentation, some for tiny changes, thanks.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJXKY35AAoJEEhZKYFQ1nG7S+4H/0e4uLWow82UxNrYCDUMo/VI
 Cto62Qo/lQTQb3iTsU3WD/SA1GOB0fei2GL53YuqoqsOcHSQQHMvnWQLps/YCHtT
 l/YMY0arxysFNHkA+8wGTrfnRi/Nm2dJlSlkAJleTgD09dnobHYTk4AVDjSqvvb5
 gvpMReTe4+ZsC7Nitum7Sg3dLHCJBdmXAWLKBOZ9beDSw5t1xbImjt8ud8k/eAYG
 UseCqp8BClhKYGmLOAPRZvootmIvKEahGt0z2YXSJoVuHs0e3+7K23EVSV+zR+0Y
 WMHdQXR4HOl6bcuXiHUKpN9SvUff7IxcMLnP/cBJ2lLHSVNS0yzO+NBsogx/f28=
 =0707
 -----END PGP SIGNATURE-----

Merge tag 'usb-ci-v4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next

Hi Greg, below are changes for chipidea and OTG FSM, no major changes.
Some for documentation, some for tiny changes, thanks.
2016-05-04 10:25:58 -07:00
Peter Chen 764763f0a0 doc: usb: chipidea: update the doc for OTG FSM
Since we have added otg version and HNP polling support, update
related documentation.

Signed-off-by: Peter Chen <peter.chen@nxp.com>
2016-05-04 13:40:31 +08:00
Diego Herranz 2dc0194c1d doc: usb: Fix typo in gadget_multi documentation
It tries to "match" drivers for each interface (not "much").

Signed-off-by: Diego Herranz <diegoherranz@diegoherranz.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-13 12:02:28 -07:00
Reilly Grant d883f52e1f usb: devio: Add ioctl to disallow detaching kernel USB drivers.
The new USBDEVFS_DROP_PRIVILEGES ioctl allows a process to voluntarily
relinquish the ability to issue other ioctls that may interfere with
other processes and drivers that have claimed an interface on the
device.

This commit also includes a simple utility to be able to test the
ioctl, located at Documentation/usb/usbdevfs-drop-permissions.c

Example (with qemu-kvm's input device):

    $ lsusb
    ...
    Bus 001 Device 002: ID 0627:0001 Adomax Technology Co., Ltd

    $ usb-devices
    ...
    C:  #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
    I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=02 Driver=usbhid

    $ sudo ./usbdevfs-drop-permissions /dev/bus/usb/001/002
    OK: privileges dropped!
    Available options:
    [0] Exit now
    [1] Reset device. Should fail if device is in use
    [2] Claim 4 interfaces. Should succeed where not in use
    [3] Narrow interface permission mask
    Which option shall I run?: 1
    ERROR: USBDEVFS_RESET failed! (1 - Operation not permitted)
    Which test shall I run next?: 2
    ERROR claiming if 0 (1 - Operation not permitted)
    ERROR claiming if 1 (1 - Operation not permitted)
    ERROR claiming if 2 (1 - Operation not permitted)
    ERROR claiming if 3 (1 - Operation not permitted)
    Which test shall I run next?: 0

After unbinding usbhid:

    $ usb-devices
    ...
    I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=02 Driver=(none)

    $ sudo ./usbdevfs-drop-permissions /dev/bus/usb/001/002
    ...
    Which option shall I run?: 2
    OK: claimed if 0
    ERROR claiming if 1 (1 - Operation not permitted)
    ERROR claiming if 2 (1 - Operation not permitted)
    ERROR claiming if 3 (1 - Operation not permitted)
    Which test shall I run next?: 1
    OK: USBDEVFS_RESET succeeded
    Which test shall I run next?: 0

After unbinding usbhid and restricting the mask:

    $ sudo ./usbdevfs-drop-permissions /dev/bus/usb/001/002
    ...
    Which option shall I run?: 3
    Insert new mask: 0
    OK: privileges dropped!
    Which test shall I run next?: 2
    ERROR claiming if 0 (1 - Operation not permitted)
    ERROR claiming if 1 (1 - Operation not permitted)
    ERROR claiming if 2 (1 - Operation not permitted)
    ERROR claiming if 3 (1 - Operation not permitted)

Signed-off-by: Reilly Grant <reillyg@chromium.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Emilio López <emilio.lopez@collabora.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-05 12:05:01 -08:00
Greg Kroah-Hartman 3d0712deb0 usb changes for v4.6 merge window
This is almost all under drivers/usb/dwc2/. Many
 changes to the host side implementation of dwc2 have
 been done by Douglas Anderson.
 
 We also have USB 3.1 support added to the Gadget
 Framework and, because of that work, dwc3 got
 support to Synopsys new DWC_usb31 IP core.
 
 Other than these 2 important series, we also have
 the usual collection of non-critical fixes,
 Documentation updates, and minor changes all over
 the place.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJW2YqWAAoJEIaOsuA1yqREJEgP/11ETLS7iE+HgYMEWbJxo4Ri
 6H7XryMuqyiqNSUrmYlSeax2CQCLac3fXNN7iDGkT2Ot6E3CcnOzdq5/fTSoAEvN
 vgv0nr1MHQaYlYMlsFNZJjZ98h2ZsmtYFuY+RJAKivgjCKoIR6XHeU0ExjAjyWZJ
 5exPyfA8tGnHOJFGdZUe4bBQGCG5TO/cxVkc7xkX6bLnpJibuiRJfToxbwHjY0cK
 mQPba+Tw+3E72mhZw1qw8jwqjLCdgRZXlEvMl0ogaiQydEntDC4bIbY4xDJ8c4L2
 EsACyyx63XYTiaELScxJ2e0Oh0d2yOxLZnUvspsZDlTL0OF/9E2wrVO+1s+FzdQ+
 MmvU9lPcTm+SToIJMWPkmCxpwxtQ2+4HR6IwaU2CIC1YwIjMBzhEvhHV9uZDRx2Q
 7haTEQ5Hny3YvOElEYSAof3WiUCdjMoT4UKCpPFVTZ62mVpOrlcahZoS4UbyOobd
 YGJBx2GwNLpC/Hoa5anasGLeGlR2rtPciHyvYlVm+X9OvQXnHx5d6KqlaBlM+U/6
 vjFtwS7nbbX+ttM7EtdmrC/8i0bFJQqmqg48a7El+E4Os9VJ79+/h9xmoDWoSEWX
 uTUhro+gLs23P6DAd/A08UL/Get0pqM+QdB42Y+ac3CIyl0dviRQ/2JCKgijo52Z
 wK+nnmuJIgzt8ljSzu9G
 =vivP
 -----END PGP SIGNATURE-----

Merge tag 'usb-for-v4.6' of http://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb changes for v4.6 merge window

This is almost all under drivers/usb/dwc2/. Many
changes to the host side implementation of dwc2 have
been done by Douglas Anderson.

We also have USB 3.1 support added to the Gadget
Framework and, because of that work, dwc3 got
support to Synopsys new DWC_usb31 IP core.

Other than these 2 important series, we also have
the usual collection of non-critical fixes,
Documentation updates, and minor changes all over
the place.
2016-03-04 18:43:07 -08:00