Граф коммитов

1480 Коммитов

Автор SHA1 Сообщение Дата
Linus Torvalds 47853e7fa5 Merge git://git.linux-nfs.org/pub/linux/nfs-2.6 2006-01-06 15:22:57 -08:00
Evgeniy 221fc10ec8 [PATCH] fs/ufs: debug mode compilation failure
This patch should fix compilation failure of fs/ufs/dir.c with defined UFS_DIR_DEBUG

Signed-off-by: Evgeniy Dushistov <dushistov@mail.ru>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 15:22:28 -08:00
Trond Myklebust 26c78e156b NFSv4: Fix an Oops in nfs_do_expire_all_delegations
If the loop errors, we need to exit.

 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:58 -05:00
Trond Myklebust 58df095b73 NFSv4: Allow entries in the idmap cache to expire
If someone changes the uid/gid mapping in userland, then we do eventually
 want those changes to be propagated to the kernel. Currently the kernel
 assumes that it may cache entries forever.

 Add an expiration time + garbage collector for idmap entries.

 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:58 -05:00
Trond Myklebust eadb8c1471 NFS: get rid of some needless code obfuscation in xdr_encode_sattr().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:57 -05:00
Trond Myklebust cf3fff54a4 NFS: Send valid mode bits to the server
inode->i_mode contains a lot more than just the mode bits. Make sure that
 we mask away this extra stuff in SETATTR calls to the server.

 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:57 -05:00
Chuck Lever f518e35aec SUNRPC: get rid of cl_chatty
Clean up: Every ULP that uses the in-kernel RPC client, except the NLM
 client, sets cl_chatty.  There's no reason why NLM shouldn't set it, so
 just get rid of cl_chatty and always be verbose.

 Test-plan:
 Compile with CONFIG_NFS enabled.

 Signed-off-by: Chuck Lever <cel@netapp.com>
 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:56 -05:00
Chuck Lever 35f5a422ce SUNRPC: new interface to force an RPC rebind
We'd like to hide fields in rpc_xprt and rpc_clnt from upper layer protocols.
 Start by creating an API to force RPC rebind, replacing logic that simply
 sets cl_port to zero.

 Test-plan:
 Destructive testing (unplugging the network temporarily).  Connectathon
 with UDP and TCP.  NFSv2/3 and NFSv4 mounting should be carefully checked.
 Probably need to rig a server where certain services aren't running, or
 that returns an error for some typical operation.

 Signed-off-by: Chuck Lever <cel@netapp.com>
 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:56 -05:00
J. Bruce Fields 03c2173393 NFSv3: try get_root user-supplied security_flavor
Thanks to Ed Keizer for bug and root cause.  He says: "... we could only mount
 the top-level Solaris share. We could not mount deeper into the tree.
 Investigation showed that Solaris allows UNIX authenticated FSINFO only on the
 top level of the share. This is a problem because we share/export our home
 directories one level higher than we mount them. I.e. we share the partition
 and not the individual home directories. This prevented access to home
 directories."

 We still may need to try auth_sys for the case where the client doesn't have
 appropriate credentials.

 Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:55 -05:00
J. Bruce Fields a659753ecc NLM: fix parsing of sm notify procedure
The procedure that decodes statd sm_notify call seems to be skipping a
 few arguments.  How did this ever work?

 >From folks at Polyserve.

 Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:54 -05:00
J. Bruce Fields 64a318ee2a NLM: Further cancel fixes
If the server receives an NLM cancel call and finds no waiting lock to
 cancel, then chances are the lock has already been applied, and the client
 just hadn't yet processed the NLM granted callback before it sent the
 cancel.

 The Open Group text, for example, perimts a server to return either success
 (LCK_GRANTED) or failure (LCK_DENIED) in this case.  But returning an error
 seems more helpful; the client may be able to use it to recognize that a
 race has occurred and to recover from the race.

 So, modify the relevant functions to return an error in this case.

 Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:54 -05:00
J. Bruce Fields 2c5acd2e1a NLM: clean up nlmsvc_delete_block
The fl_next check here is superfluous (and possibly a layering violation).

 Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:54 -05:00
J. Bruce Fields 5996a298da NLM: don't unlock on cancel requests
Currently when lockd gets an NLM_CANCEL request, it also does an unlock for
 the same range.  This is incorrect.

 The Open Group documentation says that "This procedure cancels an
 *outstanding* blocked lock request."  (Emphasis mine.)

 Also, consider a client that holds a lock on the first byte of a file, and
 requests a lock on the entire file.  If the client cancels that request
 (perhaps because the requesting process is signalled), the server shouldn't
 apply perform an unlock on the entire file, since that will also remove the
 previous lock that the client was already granted.

 Or consider a lock request that actually *downgraded* an exclusive lock to
 a shared lock.

 Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:53 -05:00
J. Bruce Fields f232142cc2 NLM: Clean up nlmsvc_grant_reply locking
Slightly simpler logic here makes it more trivial to verify that the up's
 and down's are balanced here.  Break out an assignment from a conditional
 while we're at it.

 Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:53 -05:00
Trond Myklebust a72b44222d NFSv4: Allow user to set the port used by the NFSv4 callback channel
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:52 -05:00
Trond Myklebust a895b4a198 NFS: Clean up weak cache consistency code
...and ensure that nfs_update_inode() respects wcc

 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:52 -05:00
Trond Myklebust fa178f29c0 NFSv4: Ensure DELEGRETURN returns attributes
Upon return of a write delegation, the server will almost always bump the
 change attribute. Ensure that we pick up that change so that we don't
 invalidate our data cache unnecessarily.

 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:51 -05:00
Trond Myklebust beb2a5ec38 NFSv4: Ensure change attribute returned by GETATTR callback conforms to spec
According to RFC3530 we're supposed to cache the change attribute
 at the time the client receives a write delegation.
 If the inode is clean, a CB_GETATTR callback by the server to the
 client is supposed to return the cached change attribute.
 If, OTOH, the inode is dirty, the client should bump the cached
 change attribute by 1.

 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:51 -05:00
Trond Myklebust 566dd6064e NFS: Make directIO aware of compound pages...
...and avoid calling set_page_dirty on them

 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:50 -05:00
Trond Myklebust 70b9ecbdb9 NFS: Make stat() return updated mtimes after a write()
The SuS states that a call to write() will cause mtime to be updated on
 the file. In order to satisfy that requirement, we need to flush out
 any cached writes in nfs_getattr().
 Speed things up slightly by not committing the writes.

 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:50 -05:00
Trond Myklebust 24174119c7 NFSv4: Ensure that we return the delegation on the target of a rename too.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:50 -05:00
Chuck Lever 40859d7ee6 NFS: support large reads and writes on the wire
Most NFS server implementations allow up to 64KB reads and writes on the
 wire.  The Solaris NFS server allows up to a megabyte, for instance.

 Now the Linux NFS client supports transfer sizes up to 1MB, too.  This will
 help reduce protocol and context switch overhead on read/write intensive NFS
 workloads, and support larger atomic read and write operations on servers
 that support them.

 Test-plan:
 Connectathon and iozone on mount point with wsize=rsize>32768 over TCP.
 Tests with NFS over UDP to verify the maximum RPC payload size cap.

 Signed-off-by: Chuck Lever <cel@netapp.com>
 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:49 -05:00
Chuck Lever 325cfed9ae NFS: make "inode number mismatch" message more useful
To help NFS users and server developers, make the "inode number mismatch"
 message display more useful information.

 Test-plan:
 None.

 Signed-off-by: Chuck Lever <cel@netapp.com>
 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:49 -05:00
Chuck Lever dc20f80390 NFS: get rid of useless kernel log message
nfs_statfs() generates a log message when GETATTR returns an error.  This
 is usually a useless message.  Make it a dprintk.

 Test plan:
 None

 Signed-off-by: Chuck Lever <cel@netapp.com>
 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:48 -05:00
Chuck Lever 6b59a75460 NFS: Fix error recovery code in fs/nfs/inode.c:__init_nfs()
Red Hat found a problem in the error recovery logic in __init_nfs.

 Signed-off-by: Chuck Lever <cel@netapp.com>
 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:48 -05:00
Chuck Lever ce1a8e6796 NFS: use generic_write_checks() to sanity check direct writes
Replace ad hoc write parameter sanity checking in nfs_file_direct_write()
 with a call to generic_write_checks().  This should make the proper checks
 modulo the O_LARGEFILE flag, and should catch NFSv2-specific limitations by
 virtue of i_sb->s_maxbytes.

 Test plan:
 Posix compliance testing with both NFSv2 and NFSv3.

 Signed-off-by: Chuck Lever <cel@netapp.com>
 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:47 -05:00
Trond Myklebust 286d7d6a0c NFSv4: Remove requirement for machine creds for the "setclientid" operation
Use a cred from the nfs4_client->cl_state_owners list.

 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:47 -05:00
Trond Myklebust b4454fe1a7 NFSv4: Remove requirement for machine creds for the "renew" operation
In RFC3530, the RENEW operation is allowed to use either

 the same principal, RPC security flavour and (if RPCSEC_GSS), the same
  mechanism and service that was used for SETCLIENTID_CONFIRM

 OR

 Any principal, RPC security flavour and service combination that
 currently has an OPEN file on the server.

 Choose the latter since that doesn't require us to keep credentials for
 the same principal for the entire duration of the mount.

 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:47 -05:00
Trond Myklebust 58d9714a44 NFSv4: Send RENEW requests to the server only when we're holding state
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:46 -05:00
Trond Myklebust 5043e900f5 NFS: Convert instances of kernel_thread() to kthread()
Convert private implementations in NFSv4 state recovery and delegation
 code to use kthreads.

 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:46 -05:00
Trond Myklebust 433fbe4c88 NFSv4: State recovery cleanup
Use wait_on_bit() when waiting for state recovery to complete.

 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:45 -05:00
Trond Myklebust 26e976a884 NFSv4: OPEN/LOCK/LOCKU/CLOSE will automatically renew the NFSv4 lease
Cut down on the number of unnecessary RENEW requests on the wire.

 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:45 -05:00
Trond Myklebust 2bd615797e SUNRPC: Ensure that SIGKILL will always terminate a synchronous RPC call.
...and make sure that the "intr" flag also enables SIGHUP and SIGTERM to
 interrupt RPC calls too (as per the Solaris implementation).

 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:45 -05:00
Trond Myklebust fe650407a8 NFSv4: Make DELEGRETURN an interruptible operation.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:44 -05:00
Trond Myklebust a5d16a4d09 NFSv4: Convert LOCK rpc call into an asynchronous RPC call
In order to allow users to interrupt/cancel it.

 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:44 -05:00
Trond Myklebust 911d1aaf26 NFSv4: locking XDR cleanup
Get rid of some unnecessary intermediate structures

 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:44 -05:00
Trond Myklebust 864472e9b8 NFSv4: Make open recovery track O_RDWR, O_RDONLY and O_WRONLY correctly
When recovering from a delegation recall or a network partition, we need
 to replay open(O_RDWR), open(O_RDONLY) and open(O_WRONLY) separately.

 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:43 -05:00
Trond Myklebust e761692381 NFSv4: Make nfs4_state track O_RDWR, O_RDONLY and O_WRONLY separately
A closer reading of RFC3530 reveals that OPEN_DOWNGRADE must always
 specify a access modes that have been the argument of a previous OPEN
 operation.
 IOW: doing OPEN(O_RDWR) and then OPEN_DOWNGRADE(O_WRONLY) is forbidden
 unless the user called OPEN(O_WRONLY)

 In order to fix that, we really need to track the three possible open
 states separately.

 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:43 -05:00
Trond Myklebust cdd4e68b5f NFSv4: Make open_confirm() asynchronous too
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:42 -05:00
Trond Myklebust 24ac23ab88 NFSv4: Convert open() into an asynchronous RPC call
OPEN is a stateful operation, so we must ensure that it always
 completes. In order to allow users to interrupt the operation,
 we need to make the RPC call asynchronous, and then wait on
 completion (or cancel).

 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:42 -05:00
Trond Myklebust e56e0b78eb NFSv4: Allocate OPEN call RPC arguments using kmalloc()
Cleanup in preparation for making OPEN calls interruptible by the user.

 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:41 -05:00
Trond Myklebust 06f814a3ad NFSv4: Make locku use the new RPC "wait on completion" interface.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:40 -05:00
Trond Myklebust 44c288732f NFSv4: stateful NFSv4 RPC call interface
The NFSv4 model requires us to complete all RPC calls that might
 establish state on the server whether or not the user wants to
 interrupt it. We may also need to schedule new work (including
 new RPC calls) in order to cancel the new state.

 The asynchronous RPC model will allow us to ensure that RPC calls
 always complete, but in order to allow for "synchronous" RPC, we
 want to add the ability to wait for completion.
 The waits are, of course, interruptible.

 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:40 -05:00
Trond Myklebust 4ce70ada1f SUNRPC: Further cleanups
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:40 -05:00
Trond Myklebust 963d8fe533 RPC: Clean up RPC task structure
Shrink the RPC task structure. Instead of storing separate pointers
 for task->tk_exit and task->tk_release, put them in a structure.

 Also pass the user data pointer as a parameter instead of passing it via
 task->tk_calldata. This enables us to nest callbacks.

 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:39 -05:00
Trond Myklebust abd3e641d5 NFS: Work correctly with single-page ->writepage() calls
Ensure that we always initiate flushing of data before we exit
 a single-page ->writepage() call.

 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:39 -05:00
Linus Torvalds d99cf9d679 Merge branch 'post-2.6.15' of git://brick.kernel.dk/data/git/linux-2.6-block
Manual fixup for merge with Jens' "Suspend support for libata", commit
ID 9b84754866.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 09:01:25 -08:00
Neil Brown 9f708e40fe [PATCH] knfsd: reduce stack consumption
A typical nfsd call trace is
 nfsd -> svc_process -> nfsd_dispatch -> nfsd3_proc_write ->
   nfsd_write ->nfsd_vfs_write -> vfs_writev

These add up to over 300 bytes on the stack.
Looking at each of these, I see that nfsd_write (which includes
 nfsd_vfs_write) contributes 0x8c to stack usage itself!!

It turns out this is because it puts a 'struct iattr' on the stack so
it can kill suid if needed.  The following patch saves about 50 bytes
off the stack in this call path.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:33:59 -08:00
David Shaw a334de2866 [PATCH] knfsd: check error status from vfs_getattr and i_op->fsync
Both vfs_getattr and i_op->fsync return error statuses which nfsd was
largely ignoring.  This as noticed when exporting directories using fuse.

This patch cleans up most of the offences, which involves moving the call
to vfs_getattr out of the xdr encoding routines (where it is too late to
report an error) into the main NFS procedure handling routines.

There is still a called to vfs_gettattr (related to the ACL code) where the
status is ignored, and called to nfsd_sync_dir don't check return status
either.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:33:59 -08:00
Jan Kara f93ea411b7 [PATCH] jbd: split checkpoint lists
Split the checkpoint list of the transaction into two lists.  In the first
list we keep the buffers that need to be submitted for IO.  In the second
list are kept buffers that were already submitted and we just have to wait
for the IO to complete.  This should simplify a handling of checkpoint
lists a bit and can eventually be also a performance gain.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:33:59 -08:00