We support short command 'rec*' for 'record' and 'rep*' for 'report' in
lots of sub-commands, but the matching is not quite strict currnetly.
It may be puzzling sometime, like we mis-type a 'recport' to report but
it will perform 'record' in fact without any message.
To fix this, add a check to ensure that the short cmd is valid prefix
of the real command.
Committer testing:
[root@quaco ~]# perf c2c re sleep 1
Usage: perf c2c {record|report}
-v, --verbose be more verbose (show counter open errors, etc)
# perf c2c rec sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.038 MB perf.data (16 samples) ]
# perf c2c recport sleep 1
Usage: perf c2c {record|report}
-v, --verbose be more verbose (show counter open errors, etc)
# perf c2c record sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.038 MB perf.data (15 samples) ]
# perf c2c records sleep 1
Usage: perf c2c {record|report}
-v, --verbose be more verbose (show counter open errors, etc)
#
Signed-off-by: Wei Li <liwei391@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Rui Xiang <rui.xiang@huawei.com>
Link: http://lore.kernel.org/lkml/20220325092032.2956161-1-liwei391@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A common problem is confusing CPU map indices with the CPU, by wrapping
the CPU with a struct then this is avoided. This approach is similar to
atomic_t.
Committer notes:
To make it build with BUILD_BPF_SKEL=1 these files needed the
conversions to 'struct perf_cpu' usage:
tools/perf/util/bpf_counter.c
tools/perf/util/bpf_counter_cgroup.c
tools/perf/util/bpf_ftrace.c
Also perf_env__get_cpu() was removed back in "perf cpumap: Switch
cpu_map__build_map to cpu function".
Additionally these needed to be fixed for the ARM builds to complete:
tools/perf/arch/arm/util/cs-etm.c
tools/perf/arch/arm64/util/pmu.c
Suggested-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Vineet Singh <vineet.singh@intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: zhengjun.xing@intel.com
Link: https://lore.kernel.org/r/20220105061351.120843-49-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The repipe argument is only used by perf inject and the all others
passes 'false'. Let's remove it from the function signature and add
__perf_session__new() to be called from perf inject directly.
This is a preparation of the change the pipe input/output.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210719223153.1618812-2-namhyung@kernel.org
[ Fixed up some trivial conflicts as this patchset fell thru the cracks ;-( ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_evlist__ is for 'struct perf_evlist' methods, in tools/lib/perf/,
go on completing this split.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf kmem' has an input file option but current an output file option
fails:
$ sudo perf kmem record -o /tmp/p.data sleep 1
Error: unknown switch `o'
Usage: perf kmem [<options>] {record|stat}
-f, --force don't complain, do it
-i, --input <file> input file name
-l, --line <num> show n lines
-s, --sort <key[,key2...]>
sort by keys: ptr, callsite, bytes, hit, pingpong, frag, page, order, mig>
-v, --verbose be more verbose (show symbol address, etc)
--alloc show per-allocation statistics
--caller show per-callsite statistics
--live Show live page stat
--page Analyze page allocator
--raw-ip show raw ip instead of symbol
--slab Analyze slab allocator
--time <str> Time span of interest (start,stop)
'perf sched' is similar in implementation and avoids the problem by
passing additional arguments to 'perf record'.
This change makes 'perf kmem' parse command line options consistently
with 'perf sched', although neither actually list that -o is a supported
option.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200708183919.4141023-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As those is a 'struct evsel' methods, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As those are not 'struct evsel' methods, not part of tools/lib/perf/,
aka libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As they are 'struct evsel' methods or related routines, not part of
tools/lib/perf/, aka libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To ease passing around map+symbol, just like done for other parts of the
tree recently.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The memory @orig_flags is allocated by strdup(), it is freed on the
normal path, but leak to free on the error path.
Fix this by adding free(orig_flags) on the error path.
Fixes: 0e11115644 ("perf kmem: Print gfp flags in human readable string")
Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Feilong Lin <linfeilong@huawei.com>
Cc: Hu Shiyuan <hushiyuan@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/f9e9f458-96f3-4a97-a1d5-9feec2420e07@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch is to return error code of perf_new_session function on
failure instead of NULL.
Test Results:
Before Fix:
$ perf c2c report -input
failed to open nput: No such file or directory
$ echo $?
0
$
After Fix:
$ perf c2c report -input
failed to open nput: No such file or directory
$ echo $?
254
$
Committer notes:
Fix 'perf tests topology' case, where we use that TEST_ASSERT_VAL(...,
session), i.e. we need to pass zero in case of failure, which was the
case before when NULL was returned by perf_session__new() for failure,
but now we need to negate the result of IS_ERR(session) to respect that
TEST_ASSERT_VAL) expectation of zero meaning failure.
Reported-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com>
Signed-off-by: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com>
Acked-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shawn Landden <shawn@git.icu>
Cc: Song Liu <songliubraving@fb.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Link: http://lore.kernel.org/lkml/20190822071223.17892.45782.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can reduce the header dependency tree further, in the process
noticed that lots of places were getting even things like build-id
routines and 'struct perf_tool' definition indirectly, so fix all those
too.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-ti0btma9ow5ndrytyoqdk62j@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Libtraceevent APIs for printing various trace events information are
complicated, there are complex extra parameters. To control the way
event information is printed, the user should call a set of functions in
a specific sequence.
These APIs are reimplemented to provide a more simple interface for
printing event information.
Removed APIs:
tep_print_event_task()
tep_print_event_time()
tep_print_event_data()
tep_event_info()
tep_is_latency_format()
tep_set_latency_format()
tep_data_latency_format()
tep_set_print_raw()
A new API for printing event information is introduced:
void tep_print_event(struct tep_handle *tep, struct trace_seq *s,
struct tep_record *record, const char *fmt, ...);
where "fmt" is a printf-like format string, followed by the event
fields to be printed. Supported fields:
TEP_PRINT_PID, "%d" - event PID
TEP_PRINT_CPU, "%d" - event CPU
TEP_PRINT_COMM, "%s" - event command string
TEP_PRINT_NAME, "%s" - event name
TEP_PRINT_LATENCY, "%s" - event latency
TEP_PRINT_TIME, %d - event time stamp. A divisor and precision
can be specified as part of this format string:
"%precision.divisord". Example:
"%3.1000d" - divide the time by 1000 and print the first 3 digits
before the dot. Thus, the time stamp "123456000" will be printed as
"123.456"
TEP_PRINT_INFO, "%s" - event information.
TEP_PRINT_INFO_RAW, "%s" - event information, in raw format.
Example:
tep_print_event(tep, s, record, "%16s-%-5d [%03d] %s %6.1000d %s %s",
TEP_PRINT_COMM, TEP_PRINT_PID, TEP_PRINT_CPU,
TEP_PRINT_LATENCY, TEP_PRINT_TIME, TEP_PRINT_NAME, TEP_PRINT_INFO);
Output:
ls-11314 [005] d.h. 185207.366383 function __wake_up
Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linux-trace-devel@vger.kernel.org
Cc: Patrick McLean <chutzpah@gentoo.org>
Link: http://lore.kernel.org/linux-trace-devel/20190801074959.22023-2-tz.stoyanov@gmail.com
Link: http://lore.kernel.org/lkml/20190805204355.041132030@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
All we need there is a forward declaration for 'union perf_event', so
remove it from there and add missing header directives in places using
things from this indirect include.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-7ftk0ztstqub1tirjj8o8xbl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename struct perf_evsel to struct evsel, so we don't have a name clash
when we add struct perf_evsel in libperf.
Committer notes:
Added fixes for arm64, provided by Jiri.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Eroding a bit more the tools/perf/util/util.h hodpodge header.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-natazosyn9rwjka25tvcnyi0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We got the sane_ctype.h headers from git and kept using it so far, but
since that code originally came from the kernel sources to the git
sources, perhaps its better to just use the one in the kernel, so that
we can leverage tools/perf/check_headers.sh to be notified when our copy
gets out of sync, i.e. when fixes or goodies are added to the code we've
copied.
This will help with things like tools/lib/string.c where we want to have
more things in common with the kernel, such as strim(), skip_spaces(),
etc so as to go on removing the things that we have in tools/perf/util/
and instead using the code in the kernel, indirectly and removing things
like EXPORT_SYMBOL(), etc, getting notified when fixes and improvements
are made to the original code.
Hopefully this also should help with reducing the difference of code
hosted in tools/ to the one in the kernel proper.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-7k9868l713wqtgo01xxygn12@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Those are not in that file in the git repo, lets move it from there so
that we get that sane ctype code fully isolated to allow getting it in
sync either with the git sources or better with the kernel sources
(include/linux/ctype.h + lib/ctype.h), that way we can use
check_headers.h to get notified when changes are made in the original
code so that we can cherry-pick.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-ioh5sghn3943j0rxg6lb2dgs@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The member "pevent" of the struct tep_event is renamed to "tep". This
makes the struct consistent with the chosen naming convention:
tep (trace event parser), instead of the old pevent.
Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/linux-trace-devel/20190401132111.13727-3-tstoyanov@vmware.com
Link: http://lkml.kernel.org/r/20190401164344.627724996@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a 'path' member to 'struct perf_data'. It will keep the configured
path for the data (const char *). The path in struct perf_data_file is
now dynamically allocated (duped) from it.
This scheme is useful/used in following patches where struct
perf_data::path holds the 'configure' directory path and struct
perf_data_file::path holds the allocated path for specific files.
Also it actually makes the code little simpler.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20190221094145.9151-3-jolsa@kernel.org
[ Fixup data-convert-bt.c missing conversion ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Lots of places get the map.h file indirectly, and since we're going to
remove it from machine.h, then those need to include it directly, do it
now, before we remove that dep.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-ob8jehdjda8h5jsrv9dqj9tf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
pevent_get_page_size API and enum pevent_flag to enum tep_flag
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180701.623942406@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
APIs: pevent_alloc, pevent_free, pevent_event_info and pevent_func_resolver_t
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180700.152609945@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
the 'struct pevent_record' to 'struct tep_record'.
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180659.866021298@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since we do not have split symtabs anymore, no need to have explicit
find_kernel_function variants, use the find_kernel_symbol ones.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-hiw2ryflju000f6wl62128it@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As the page free path makes no distinction between cache hot and cold
pages, there is no real useful ordering of pages in the free list that
allocation requests can take advantage of. Juding from the users of
__GFP_COLD, it is likely that a number of them are the result of copying
other sites instead of actually measuring the impact. Remove the
__GFP_COLD parameter which simplifies a number of paths in the page
allocator.
This is potentially controversial but bear in mind that the size of the
per-cpu pagelists versus modern cache sizes means that the whole per-cpu
list can often fit in the L3 cache. Hence, there is only a potential
benefit for microbenchmarks that alloc/free pages in a tight loop. It's
even worse when THP is taken into account which has little or no chance
of getting a cache-hot page as the per-cpu list is bypassed and the
zeroing of multiple pages will thrash the cache anyway.
The truncate microbenchmarks are not shown as this patch affects the
allocation path and not the free path. A page fault microbenchmark was
tested but it showed no sigificant difference which is not surprising
given that the __GFP_COLD branches are a miniscule percentage of the
fault path.
Link: http://lkml.kernel.org/r/20171018075952.10627-9-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that kmemcheck is gone, we don't need the NOTRACK flags.
Link: http://lkml.kernel.org/r/20171007030159.22241-5-alexander.levin@verizon.com
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tim Hansen <devtimhansen@gmail.com>
Cc: Vegard Nossum <vegardno@ifi.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add struct perf_data_file to represent a single file within a perf_data
struct.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Changbin Du <changbin.du@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-c3f9p4xzykr845ktqcek6p4t@git.kernel.org
[ Fixup recent changes in 'perf script --per-event-dump' ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename struct perf_data_file to perf_data, because we will add the
possibility to have multiple files under perf.data, so the 'perf_data'
name fits better.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Changbin Du <changbin.du@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-39wn4d77phel3dgkzo3lyan0@git.kernel.org
[ Fixup recent changes in 'perf script --per-event-dump' ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the string passed in '--time' is invalid, we must do some cleanup
before leaving. As in the other error handling paths of this function.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-janitors@vger.kernel.org
Fixes: 2a865bd8dd ("perf kmem: Add option to specify time window of interest")
Link: http://lkml.kernel.org/r/20170916060936.28199-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
GFP_TEMPORARY was introduced by commit e12ba74d8f ("Group short-lived
and reclaimable kernel allocations") along with __GFP_RECLAIMABLE. It's
primary motivation was to allow users to tell that an allocation is
short lived and so the allocator can try to place such allocations close
together and prevent long term fragmentation. As much as this sounds
like a reasonable semantic it becomes much less clear when to use the
highlevel GFP_TEMPORARY allocation flag. How long is temporary? Can the
context holding that memory sleep? Can it take locks? It seems there is
no good answer for those questions.
The current implementation of GFP_TEMPORARY is basically GFP_KERNEL |
__GFP_RECLAIMABLE which in itself is tricky because basically none of
the existing caller provide a way to reclaim the allocated memory. So
this is rather misleading and hard to evaluate for any benefits.
I have checked some random users and none of them has added the flag
with a specific justification. I suspect most of them just copied from
other existing users and others just thought it might be a good idea to
use without any measuring. This suggests that GFP_TEMPORARY just
motivates for cargo cult usage without any reasoning.
I believe that our gfp flags are quite complex already and especially
those with highlevel semantic should be clearly defined to prevent from
confusion and abuse. Therefore I propose dropping GFP_TEMPORARY and
replace all existing users to simply use GFP_KERNEL. Please note that
SLAB users with shrinkers will still get __GFP_RECLAIMABLE heuristic and
so they will be placed properly for memory fragmentation prevention.
I can see reasons we might want some gfp flag to reflect shorterm
allocations but I propose starting from a clear semantic definition and
only then add users with proper justification.
This was been brought up before LSF this year by Matthew [1] and it
turned out that GFP_TEMPORARY really doesn't have a clear semantic. It
seems to be a heuristic without any measured advantage for most (if not
all) its current users. The follow up discussion has revealed that
opinions on what might be temporary allocation differ a lot between
developers. So rather than trying to tweak existing users into a
semantic which they haven't expected I propose to simply remove the flag
and start from scratch if we really need a semantic for short term
allocations.
[1] http://lkml.kernel.org/r/20170118054945.GD18349@bombadil.infradead.org
[akpm@linux-foundation.org: fix typo]
[akpm@linux-foundation.org: coding-style fixes]
[sfr@canb.auug.org.au: drm/i915: fix up]
Link: http://lkml.kernel.org/r/20170816144703.378d4f4d@canb.auug.org.au
Link: http://lkml.kernel.org/r/20170728091904.14627-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Neil Brown <neilb@suse.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
__GFP_REPEAT was designed to allow retry-but-eventually-fail semantic to
the page allocator. This has been true but only for allocations
requests larger than PAGE_ALLOC_COSTLY_ORDER. It has been always
ignored for smaller sizes. This is a bit unfortunate because there is
no way to express the same semantic for those requests and they are
considered too important to fail so they might end up looping in the
page allocator for ever, similarly to GFP_NOFAIL requests.
Now that the whole tree has been cleaned up and accidental or misled
usage of __GFP_REPEAT flag has been removed for !costly requests we can
give the original flag a better name and more importantly a more useful
semantic. Let's rename it to __GFP_RETRY_MAYFAIL which tells the user
that the allocator would try really hard but there is no promise of a
success. This will work independent of the order and overrides the
default allocator behavior. Page allocator users have several levels of
guarantee vs. cost options (take GFP_KERNEL as an example)
- GFP_KERNEL & ~__GFP_RECLAIM - optimistic allocation without _any_
attempt to free memory at all. The most light weight mode which even
doesn't kick the background reclaim. Should be used carefully because
it might deplete the memory and the next user might hit the more
aggressive reclaim
- GFP_KERNEL & ~__GFP_DIRECT_RECLAIM (or GFP_NOWAIT)- optimistic
allocation without any attempt to free memory from the current
context but can wake kswapd to reclaim memory if the zone is below
the low watermark. Can be used from either atomic contexts or when
the request is a performance optimization and there is another
fallback for a slow path.
- (GFP_KERNEL|__GFP_HIGH) & ~__GFP_DIRECT_RECLAIM (aka GFP_ATOMIC) -
non sleeping allocation with an expensive fallback so it can access
some portion of memory reserves. Usually used from interrupt/bh
context with an expensive slow path fallback.
- GFP_KERNEL - both background and direct reclaim are allowed and the
_default_ page allocator behavior is used. That means that !costly
allocation requests are basically nofail but there is no guarantee of
that behavior so failures have to be checked properly by callers
(e.g. OOM killer victim is allowed to fail currently).
- GFP_KERNEL | __GFP_NORETRY - overrides the default allocator behavior
and all allocation requests fail early rather than cause disruptive
reclaim (one round of reclaim in this implementation). The OOM killer
is not invoked.
- GFP_KERNEL | __GFP_RETRY_MAYFAIL - overrides the default allocator
behavior and all allocation requests try really hard. The request
will fail if the reclaim cannot make any progress. The OOM killer
won't be triggered.
- GFP_KERNEL | __GFP_NOFAIL - overrides the default allocator behavior
and all allocation requests will loop endlessly until they succeed.
This might be really dangerous especially for larger orders.
Existing users of __GFP_REPEAT are changed to __GFP_RETRY_MAYFAIL
because they already had their semantic. No new users are added.
__alloc_pages_slowpath is changed to bail out for __GFP_RETRY_MAYFAIL if
there is no progress and we have already passed the OOM point.
This means that all the reclaim opportunities have been exhausted except
the most disruptive one (the OOM killer) and a user defined fallback
behavior is more sensible than keep retrying in the page allocator.
[akpm@linux-foundation.org: fix arch/sparc/kernel/mdesc.c]
[mhocko@suse.com: semantic fix]
Link: http://lkml.kernel.org/r/20170626123847.GM11534@dhcp22.suse.cz
[mhocko@kernel.org: address other thing spotted by Vlastimil]
Link: http://lkml.kernel.org/r/20170626124233.GN11534@dhcp22.suse.cz
Link: http://lkml.kernel.org/r/20170623085345.11304-3-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alex Belits <alex.belits@cavium.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: NeilBrown <neilb@suse.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To consolidate the error reporting facility.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-b41iot1094katoffdf19w9zk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Removing it from util.h, part of an effort to disentangle the includes
hell, that makes changes to util.h or something included by it to cause
a complete rebuild of the tools.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ztrjy52q1rqcchuy3rubfgt2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
More stuff that came from git, out of the hodge-podge that is util.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-e3lana4gctz3ub4hn4y29hkw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Needed to use the PRI[xu](32,64) formatting macros.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-wkbho8kaw24q67dd11q0j39f@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pave the way for further cleanups where linux/kernel.h may stop being
included in some header.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-qqxan6tfsl6qx3l0v3nwgjvk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We got it from the git sources but never used it for anything, with the
place where this would be somehow used remaining:
static int run_builtin(struct cmd_struct *p, int argc, const char **argv)
{
prefix = NULL;
if (p->option & RUN_SETUP)
prefix = NULL; /* setup_perf_directory(); */
Ditch it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-uw5swz05vol0qpr32c5lpvus@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce a new option to record PERF_RECORD_NAMESPACES events emitted
by the kernel when fork, clone, setns or unshare are invoked. And update
perf-record documentation with the new option to record namespace
events.
Committer notes:
Combined it with a later patch to allow printing it via 'perf report -D'
and be able to test the feature introduced in this patch. Had to move
here also perf_ns__name(), that was introduced in another later patch.
Also used PRIu64 and PRIx64 to fix the build in some enfironments wrt:
util/event.c:1129:39: error: format '%lx' expects argument of type 'long unsigned int', but argument 6 has type 'long long unsigned int' [-Werror=format=]
ret += fprintf(fp, "%u/%s: %lu/0x%lx%s", idx
^
Testing it:
# perf record --namespaces -a
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.083 MB perf.data (423 samples) ]
#
# perf report -D
<SNIP>
3 2028902078892 0x115140 [0xa0]: PERF_RECORD_NAMESPACES 14783/14783 - nr_namespaces: 7
[0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc,
4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb]
0x1151e0 [0x30]: event: 9
.
. ... raw event: size 48 bytes
. 0000: 09 00 00 00 02 00 30 00 c4 71 82 68 0c 7f 00 00 ......0..q.h....
. 0010: a9 39 00 00 a9 39 00 00 94 28 fe 63 d8 01 00 00 .9...9...(.c....
. 0020: 03 00 00 00 00 00 00 00 ce c4 02 00 00 00 00 00 ................
<SNIP>
NAMESPACES events: 1
<SNIP>
#
Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/148891930386.25309.18412039920746995488.stgit@hbathini.in.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As it is an array, so will always evaluate to 'true', as reported by
clang:
builtin-sched.c:2070:19: error: address of array 'sym->name' will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion]
if (sym && sym->name) {
~~ ~~~~~^~~~
1 warning generated.
So just ditch all those useless checks.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ydpm927col06paixb775jjx5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Previously these were being ignored, sometimes silently.
Stop doing that, emitting debug messages and handling the errors.
Testing it:
$ cat ~/.perfconfig
cat: /home/acme/.perfconfig: No such file or directory
$ perf stat -e cycles usleep 1
Performance counter stats for 'usleep 1':
938,996 cycles:u
0.003813731 seconds time elapsed
$ perf top --stdio
Error:
You may not have permission to collect system-wide stats.
Consider tweaking /proc/sys/kernel/perf_event_paranoid,
<SNIP>
[ perf record: Captured and wrote 0.019 MB perf.data (7 samples) ]
[acme@jouet linux]$ perf report --stdio
# To display the perf.data header info, please use --header/--header-only options.
# Overhead Command Shared Object Symbol
# ........ ....... ................. .........................
71.77% usleep libc-2.24.so [.] _dl_addr
27.07% usleep ld-2.24.so [.] _dl_next_ld_env_entry
1.13% usleep [kernel.kallsyms] [k] page_fault
$
$ touch ~/.perfconfig
$ ls -la ~/.perfconfig
-rw-rw-r--. 1 acme acme 0 Jan 27 12:14 /home/acme/.perfconfig
$
$ perf stat -e instructions usleep 1
Performance counter stats for 'usleep 1':
244,610 instructions:u
0.000805383 seconds time elapsed
$
[root@jouet ~]# chown acme.acme ~/.perfconfig
[root@jouet ~]# perf stat -e cycles usleep 1
Warning: File /root/.perfconfig not owned by current user or root, ignoring it.
Performance counter stats for 'usleep 1':
937,615 cycles
0.000836931 seconds time elapsed
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-j2rq96so6xdqlr8p8rd6a3jx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The flag was introduced by commit 78afd5612d ("mm: add
__GFP_OTHER_NODE flag") to allow proper accounting of remote node
allocations done by kernel daemons on behalf of a process - e.g.
khugepaged.
After "mm: fix remote numa hits statistics" we do not need and actually
use the flag so we can safely remove it because all allocations which
are satisfied from their "home" node are accounted properly.
[mhocko@suse.com: fix build]
Link: http://lkml.kernel.org/r/20170106122225.GK5556@dhcp22.suse.cz
Link: http://lkml.kernel.org/r/20170102153057.9451-3-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Track freed memory as well as allocations and show the net in the
summary.
Committer notes:
Testing it:
# perf kmem record usleep 1
[ perf record: Woken up 0 times to write data ]
[ perf record: Captured and wrote 1.626 MB perf.data (4208 samples) ]
[root@jouet ~]# perf kmem stat --slab
SUMMARY (SLAB allocator)
========================
Total bytes requested: 234,011
Total bytes allocated: 234,504
Total bytes freed: 213,328 <------
Net total bytes allocated: 21,176
Total bytes wasted on internal fragmentation: 493
Internal fragmentation: 0.210231%
Cross CPU allocations: 4/1,963
#
Signed-off-by: David Ahern <dsahern@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1480110133-37039-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We're not using it anymore, few users were, but we really could do
without it, simplify lots of functions by removing it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-1zng8wdznn00iiz08bb7q3vn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
After the previous patch, we can distinguish costly allocations that
should be really lightweight, such as THP page faults, with
__GFP_NORETRY. This means we don't need to recognize khugepaged
allocations via PF_KTHREAD anymore. We can also change THP page faults
in areas where madvise(MADV_HUGEPAGE) was used to try as hard as
khugepaged, as the process has indicated that it benefits from THP's and
is willing to pay some initial latency costs.
We can also make the flags handling less cryptic by distinguishing
GFP_TRANSHUGE_LIGHT (no reclaim at all, default mode in page fault) from
GFP_TRANSHUGE (only direct reclaim, khugepaged default). Adding
__GFP_NORETRY or __GFP_KSWAPD_RECLAIM is done where needed.
The patch effectively changes the current GFP_TRANSHUGE users as
follows:
* get_huge_zero_page() - the zero page lifetime should be relatively
long and it's shared by multiple users, so it's worth spending some
effort on it. We use GFP_TRANSHUGE, and __GFP_NORETRY is not added.
This also restores direct reclaim to this allocation, which was
unintentionally removed by commit e4a49efe4e7e ("mm: thp: set THP defrag
by default to madvise and add a stall-free defrag option")
* alloc_hugepage_khugepaged_gfpmask() - this is khugepaged, so latency
is not an issue. So if khugepaged "defrag" is enabled (the default), do
reclaim via GFP_TRANSHUGE without __GFP_NORETRY. We can remove the
PF_KTHREAD check from page alloc.
As a side-effect, khugepaged will now no longer check if the initial
compaction was deferred or contended. This is OK, as khugepaged sleep
times between collapsion attempts are long enough to prevent noticeable
disruption, so we should allow it to spend some effort.
* migrate_misplaced_transhuge_page() - already was masking out
__GFP_RECLAIM, so just convert to GFP_TRANSHUGE_LIGHT which is
equivalent.
* alloc_hugepage_direct_gfpmask() - vma's with VM_HUGEPAGE (via madvise)
are now allocating without __GFP_NORETRY. Other vma's keep using
__GFP_NORETRY if direct reclaim/compaction is at all allowed (by default
it's allowed only for madvised vma's). The rest is conversion to
GFP_TRANSHUGE(_LIGHT).
[mhocko@suse.com: suggested GFP_TRANSHUGE_LIGHT]
Link: http://lkml.kernel.org/r/20160721073614.24395-7-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To match the semantics for list.h in the kernel, that are used to
implement those macros.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-qbcjlgj0ffxquxscahbpddi3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Wei Li
Ian Rogers
Namhyung Kim
Arnaldo Carvalho de Melo
Yunfeng Ye
Mamatha Inamdar
Tzvetomir Stoyanov
Jiri Olsa
Rasmus Villemoes
Tzvetomir Stoyanov (VMware)
Mel Gorman
Levin, Alexander (Sasha Levin)
Ingo Molnar
Greg Kroah-Hartman
Christophe JAILLET
Michal Hocko
Hari Bathini
David Ahern
Vlastimil Babka