tcrypt starts several async crypto ops and waits for their completions.
Move it over to generic code doing the same.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix the way the length of the buffers used for
encryption / decryption are computed.
For e.g. in case of encryption, input buffer does not contain
an authentication tag.
Signed-off-by: Robert Baronescu <robert.baronescu@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add testmgr and tcrypt tests and vectors for SM3 secure hash.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove xts(aes) speed tests with 2 x 192-bit keys, since implementations
adhering strictly to IEEE 1619-2007 standard cannot cope with key sizes
other than 2 x 128, 2 x 256 bits - i.e. AES-XTS-{128,256}:
[...]
tcrypt: test 5 (384 bit key, 16 byte blocks):
caam_jr 8020000.jr: key size mismatch
tcrypt: setkey() failed flags=200000
[...]
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The tcrypt AEAD cycles speed tests disables irqs during the test, which is
broken at the very least since commit
'1425d2d17f7309c6 ("crypto: tcrypt - Fix AEAD speed tests")'
adds a wait for completion as part of the test and probably since
switching to the new AEAD API.
While the result of taking a cycle count diff may not mean much on SMP
systems if the task migrates, it's good enough for tcrypt being the quick
& dirty dev tool it is. It's also what all the other (i.e. hash) cycle
speed tests do.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Reported-by: Ofir Drang <ofir.drang@arm.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
tcrypt is very tight-lipped when it succeeds, but a bit more feedback
would be useful when developing or debugging crypto drivers, especially
since even a successful run ends with the module failing to insert. Add
a couple of debug prints, which can be enabled with dynamic debug:
Before:
# insmod tcrypt.ko mode=10
insmod: can't insert 'tcrypt.ko': Resource temporarily unavailable
After:
# insmod tcrypt.ko mode=10 dyndbg
tcrypt: testing ecb(aes)
tcrypt: testing cbc(aes)
tcrypt: testing lrw(aes)
tcrypt: testing xts(aes)
tcrypt: testing ctr(aes)
tcrypt: testing rfc3686(ctr(aes))
tcrypt: all tests passed
insmod: can't insert 'tcrypt.ko': Resource temporarily unavailable
Signed-off-by: Rabin Vincent <rabinv@axis.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds HMAC-SHA3 test modes in tcrypt module
and related test vectors.
Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The multibuffer hash speed test is incorrectly bailing because
of an EINPROGRESS return value. This patch fixes it by setting
ret to zero if it is equal to -EINPROGRESS.
Reported-by: Megha Dey <megha.dey@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch converts tcrypt to use the new skcipher interface as
opposed to ablkcipher/blkcipher.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch resolves a number of issues with the mb speed test
function:
* The tfm is never freed.
* Memory is allocated even when we're not using mb.
* When an error occurs we don't wait for completion for other requests.
* When an error occurs during allocation we may leak memory.
* The test function ignores plen but still runs for plen != blen.
* The backlog flag is incorrectly used (may crash).
This patch tries to resolve all these issues as well as making
the code consistent with the existing hash speed testing function.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
The recently added test_mb_ahash_speed() has clearly serious coding
style issues. Try to fix some of them:
1. Don't mix pr_err() and printk();
2. Don't wrap strings;
3. Properly align goto statement in if() block;
4. Align wrapped arguments on new line;
5. Don't wrap functions on first argument;
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a new mode to calculate the speed of the sha512_mb algorithm
Signed-off-by: Megha Dey <megha.dey@linux.intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The existing test suite to calculate the speed of the SHA algorithms
assumes serial (single buffer)) computation of data. With the SHA
multibuffer algorithms, we work on 8 lanes of data in parallel. Hence,
the need to introduce a new test suite to calculate the speed for these
algorithms.
Signed-off-by: Megha Dey <megha.dey@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Added support for SHA-3 algorithm test's
in tcrypt module and related test vectors.
Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch removes the last user of the obsolete crypto_hash
interface, tcrypt, by simply switching it over to ahash. In
fact it already has all the code there so it's just a matter
of calling the ahash speed test code with the right mask.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The key sizes used by AES in GCM mode should be 128, 192 or 256 bits (16,
24 or 32 bytes).
There is no additional 4byte nonce as for RFC 4106.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The output buffer in test_ahash_speed will point to an address located
within the tcrypt module image.
This causes problems when trying to DMA map the buffer.
For e.g. on ARM-based LS1021A, a page fault occurs within the
DMA API when trying to access the struct page returned by
virt_to_page(output):
insmod tcrypt.ko mode=403
testing speed of async sha1 (sha1-caam)
test 0 ( 16 byte blocks, 16 bytes per update, 1 updates):
Unable to handle kernel paging request at virtual address f07e9080
pgd = e58d0e00
[f07e9080] *pgd=80000080007003, *pmd=00000000
Internal error: Oops: 206 [#1] SMP THUMB2
Modules linked in: tcrypt(+)
CPU: 1 PID: 1119 Comm: insmod Not tainted 4.2.0-rc1-256134-gbf433416e675 #1
Hardware name: Freescale LS1021A
task: ea063900 ti: e5a34000 task.ti: e5a34000
PC is at dma_cache_maint_page+0x38/0xd0
LR is at __dma_page_cpu_to_dev+0x15/0x64
pc : [<800155a0>] lr : [<8001564d>] psr: 000f0033
sp : e5a35ca0 ip : 8063df00 fp : f07e9080
r10: 00000cd0 r9 : 8063df00 r8 : 805a2f04
r7 : 0017f804 r6 : 00000002 r5 : ee7f9000 r4 : 00000014
r3 : 80612d40 r2 : 01ff0080 r1 : 00000380 r0 : ee7f9000
Flags: nzcv IRQs on FIQs on Mode SVC_32 ISA Thumb Segment user
Control: 70c5387d Table: e58d0e00 DAC: 9b7ede70
Process insmod (pid: 1119, stack limit = 0xe5a34210)
Stack: (0xe5a35ca0 to 0xe5a36000)
[...]
[<800155a0>] (dma_cache_maint_page) from [<8001564d>] (__dma_page_cpu_to_dev+0x15/0x64)
[<8001564d>] (__dma_page_cpu_to_dev) from [<800156eb>] (arm_dma_map_page+0x1f/0x44)
[<800156eb>] (arm_dma_map_page) from [<802935e3>] (ahash_digest+0x35f/0x510)
[<802935e3>] (ahash_digest) from [<7f800d03>] (test_ahash_speed.constprop.6+0x24a/0x4e4 [tcrypt])
[<7f800d03>] (test_ahash_speed.constprop.6 [tcrypt]) from [<7f802fd5>] (do_test+0x1898/0x2058 [tcrypt])
[<7f802fd5>] (do_test [tcrypt]) from [<7f80802f>] (tcrypt_mod_init+0x2e/0x63 [tcrypt])
[<7f80802f>] (tcrypt_mod_init [tcrypt]) from [<80009517>] (do_one_initcall+0xb3/0x134)
[<80009517>] (do_one_initcall) from [<80351ec7>] (do_init_module+0x3b/0x13c)
[<80351ec7>] (do_init_module) from [<8005cc3f>] (load_module+0x97b/0x9dc)
[<8005cc3f>] (load_module) from [<8005cd8d>] (SyS_finit_module+0x35/0x3e)
[<8005cd8d>] (SyS_finit_module) from [<8000d101>] (ret_fast_syscall+0x1/0x4c)
Code: 1aba 0152 eb00 0b02 (5882) 0f92
addr2line -f -i -e vmlinux 800155a0
page_zonenum
include/linux/mm.h:728
page_zone
include/linux/mm.h:881
dma_cache_maint_page
arch/arm/mm/dma-mapping.c:822
Signed-off-by: Horia Geant? <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Adds individual ChaCha20 and Poly1305 and a combined rfc7539esp AEAD speed
test using mode numbers 214, 321 and 213. For Poly1305 we add a specific
speed template, as it expects the key prepended to the input data.
Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch allows the AEAD speed tests to cope with the new seqiv
calling convention as well as the old one.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The AEAD speed tests doesn't do a wait_for_completition,
if the return value is EINPROGRESS or EBUSY.
Fixing it here.
Also add a test case for gcm(aes).
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch makes use of the new AEAD interface which uses a single
SG list instead of separate lists for the AD and plain text.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
All users of AEAD should include crypto/aead.h instead of
include/linux/crypto.h.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: David S. Miller <davem@davemloft.net>
All users of fips_enabled should include linux/fips.h directly
instead of getting it through internal.h which is reserved for
internal crypto API implementors.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The function crypto_ahash_init can also be asynchronous just
like update and final. So all callers must be able to handle
an async return.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
- This fixes the intent of the code to limit the last scatterlist to
either a full PAGE or a fraction of it, depending on the number of
pages needed by buflen and the available space advertised by XBUFLEN.
The original code always sets the last scatterlist to a fraction of a
PAGE because the first 'if' is never executed.
- Rearrange the second part of the code to remove the conditional from
the loop
Signed-off-by: Cristian Stoica <cristian.stoica@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
tcrypt/testmgr uses wait_for_completion_interruptible() everywhere when
it waits for a request to be completed. If it's interrupted, then the
test is aborted and the request is freed.
However, if any of these calls actually do get interrupted, the result
will likely be a kernel crash, when the driver handles the now-freed
request. Use wait_for_completion() instead.
Signed-off-by: Rabin Vincent <rabin.vincent@axis.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch allows the testing of arbitrary hash functions specified
by the alg module parameter by using them in mode 300 (for sync hash)
and mode 400 (for async hash).
For example, you could do
modprobe tcrypt mode=300 alg='vmac(aes)'
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Change formal parameters to not clash with global names to
eliminate many W=2 warnings.
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Print the driver name that is being tested. The driver name can be
inferred parsing /proc/crypto but having it in the output is
clearer
Signed-off-by: Luca Clementi <luca.clementi@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Test vectors were taken from existing test for
CBC(DES3_EDE). Associated data has been added to test vectors.
HMAC computed with Crypto++ has been used. Following algos have
been covered.
(a) "authenc(hmac(sha1),cbc(des))"
(b) "authenc(hmac(sha1),cbc(des3_ede))"
(c) "authenc(hmac(sha224),cbc(des))"
(d) "authenc(hmac(sha224),cbc(des3_ede))"
(e) "authenc(hmac(sha256),cbc(des))"
(f) "authenc(hmac(sha256),cbc(des3_ede))"
(g) "authenc(hmac(sha384),cbc(des))"
(h) "authenc(hmac(sha384),cbc(des3_ede))"
(i) "authenc(hmac(sha512),cbc(des))"
(j) "authenc(hmac(sha512),cbc(des3_ede))"
Signed-off-by: Vakul Garg <vakul@freescale.com>
[NiteshNarayanLal@freescale.com: added hooks for the missing algorithms test and tested the patch]
Signed-off-by: Nitesh Lal <NiteshNarayanLal@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix leakage of memory for struct aead_request that is allocated via
aead_request_alloc() but not released via aead_request_free().
Reported by Coverity - CID 1163869.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Reviewed-by: Marek Vasut <marex@denx.de>
Acked-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix a potential memory leak in the error handling of test_aead_speed(). In case
crypto_alloc_aead() fails, the function returns without going through the
centralized cleanup path. Reported by Coverity - CID 1163870.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Reviewed-by: Marek Vasut <marex@denx.de>
Acked-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix a potential memory leak in the error handling of test_aead_speed(). In case
the size check on the associate data length parameter fails, the function goes
through the wrong exit label. Reported by Coverity - CID 1163870.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Acked-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add test vectors for aead with null encryption and md5,
respectively sha1 authentication.
Input data is taken from test vectors listed in RFC2410.
Signed-off-by: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Adding simple speed tests for a range of block sizes for AEAD crypto
algorithms.
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use this new function to make code more comprehensible, since we are
reinitialzing the completion, not initializing.
[akpm@linux-foundation.org: linux-next resyncs]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13)
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch reinstates commits
67822649d739761214ee0b95a7f85731d939625a2d31e518a4
Now that module softdeps are in the kernel we can use that to resolve
the boot issue which cause the revert.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This reverts commits
67822649d739761214ee0b95a7f85731d939625a2d31e518a4
Unfortunately this change broke boot on some systems that used an
initrd which does not include the newly created crct10dif modules.
As these modules are required by sd_mod under certain configurations
this is a serious problem.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
These are simple tests to do sanity check of CRC T10 DIF hash. The
correctness of the transform can be checked with the command
modprobe tcrypt mode=47
The speed of the transform can be evaluated with the command
modprobe tcrypt mode=320
Set the cpu frequency to constant and turn turbo off when running the
speed test so the frequency governor will not tweak the frequency and
affects the measurements.
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Gilad Ben-Yossef
Robert Baronescu
Gustavo A. R. Silva
Geliang Tang
Horia Geantă
Rabin Vincent
raveendra padasalagi
Herbert Xu
Krzysztof Kozlowski
Megha Dey
Cyrille Pitchen
Horia Geant?
Martin Willi
Vutla, Lokesh
Cristian Stoica
Rabin Vincent
Mark Rustad
Luca Clementi
Jussi Kivilinna
Nitesh Lal
Christian Engelmayer
Tim Chen
Wolfram Sang