This reverts commit 774a1221e8.
We need to finish all async code before the module init sequence is
done. In the reverted commit the PF_USED_ASYNC flag was added to mark a
thread that called async_schedule(). Then the PF_USED_ASYNC flag was
used to determine whether or not async_synchronize_full() needs to be
invoked. This works when modprobe thread is calling async_schedule(),
but it does not work if module dispatches init code to a worker thread
which then calls async_schedule().
For example, PCI driver probing is invoked from a worker thread based on
a node where device is attached:
if (cpu < nr_cpu_ids)
error = work_on_cpu(cpu, local_pci_probe, &ddi);
else
error = local_pci_probe(&ddi);
We end up in a situation where a worker thread gets the PF_USED_ASYNC
flag set instead of the modprobe thread. As a result,
async_synchronize_full() is not invoked and modprobe completes without
waiting for the async code to finish.
The issue was discovered while loading the pm80xx driver:
(scsi_mod.scan=async)
modprobe pm80xx worker
...
do_init_module()
...
pci_call_probe()
work_on_cpu(local_pci_probe)
local_pci_probe()
pm8001_pci_probe()
scsi_scan_host()
async_schedule()
worker->flags |= PF_USED_ASYNC;
...
< return from worker >
...
if (current->flags & PF_USED_ASYNC) <--- false
async_synchronize_full();
Commit 21c3c5d280 ("block: don't request module during elevator init")
fixed the deadlock issue which the reverted commit 774a1221e8
("module, async: async_synchronize_full() on module init iff async is
used") tried to fix.
Since commit 0fdff3ec6d ("async, kmod: warn on synchronous
request_module() from async workers") synchronous module loading from
async is not allowed.
Given that the original deadlock issue is fixed and it is no longer
allowed to call synchronous request_module() from async we can remove
PF_USED_ASYNC flag to make module init consistently invoke
async_synchronize_full() unless async module probe is requested.
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Changyuan Lyu <changyuanl@google.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull module updates from Luis Chamberlain:
"The biggest change here is in-kernel support for module decompression.
This change is being made to help support LSMs like LoadPin as
otherwise it loses link between the source of kernel module on the
disk and binary blob that is being loaded into the kernel.
kmod decompression is still done by userspace even with this is done,
both because there are no measurable gains in not doing so and as it
adds a secondary extra check for validating the module before loading
it into the kernel.
The rest of the changes are minor, the only other change worth
mentionin there is Jessica Yu is now bowing out of maintenance of
modules as she's taking a break from work.
While there were other changes posted for modules, those have not yet
received much review of testing so I'm not yet comfortable in merging
any of those changes yet."
* 'modules-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
module: fix signature check failures when using in-kernel decompression
kernel: Fix spelling mistake "compresser" -> "compressor"
MAINTAINERS: add mailing lists for kmod and modules
module.h: allow #define strings to work with MODULE_IMPORT_NS
module: add in-kernel support for decompressing
MAINTAINERS: Remove myself as modules maintainer
module: Remove outdated comment
Pull signal/exit/ptrace updates from Eric Biederman:
"This set of changes deletes some dead code, makes a lot of cleanups
which hopefully make the code easier to follow, and fixes bugs found
along the way.
The end-game which I have not yet reached yet is for fatal signals
that generate coredumps to be short-circuit deliverable from
complete_signal, for force_siginfo_to_task not to require changing
userspace configured signal delivery state, and for the ptrace stops
to always happen in locations where we can guarantee on all
architectures that the all of the registers are saved and available on
the stack.
Removal of profile_task_ext, profile_munmap, and profile_handoff_task
are the big successes for dead code removal this round.
A bunch of small bug fixes are included, as most of the issues
reported were small enough that they would not affect bisection so I
simply added the fixes and did not fold the fixes into the changes
they were fixing.
There was a bug that broke coredumps piped to systemd-coredump. I
dropped the change that caused that bug and replaced it entirely with
something much more restrained. Unfortunately that required some
rebasing.
Some successes after this set of changes: There are few enough calls
to do_exit to audit in a reasonable amount of time. The lifetime of
struct kthread now matches the lifetime of struct task, and the
pointer to struct kthread is no longer stored in set_child_tid. The
flag SIGNAL_GROUP_COREDUMP is removed. The field group_exit_task is
removed. Issues where task->exit_code was examined with
signal->group_exit_code should been examined were fixed.
There are several loosely related changes included because I am
cleaning up and if I don't include them they will probably get lost.
The original postings of these changes can be found at:
https://lkml.kernel.org/r/87a6ha4zsd.fsf@email.froward.int.ebiederm.orghttps://lkml.kernel.org/r/87bl1kunjj.fsf@email.froward.int.ebiederm.orghttps://lkml.kernel.org/r/87r19opkx1.fsf_-_@email.froward.int.ebiederm.org
I trimmed back the last set of changes to only the obviously correct
once. Simply because there was less time for review than I had hoped"
* 'signal-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (44 commits)
ptrace/m68k: Stop open coding ptrace_report_syscall
ptrace: Remove unused regs argument from ptrace_report_syscall
ptrace: Remove second setting of PT_SEIZED in ptrace_attach
taskstats: Cleanup the use of task->exit_code
exit: Use the correct exit_code in /proc/<pid>/stat
exit: Fix the exit_code for wait_task_zombie
exit: Coredumps reach do_group_exit
exit: Remove profile_handoff_task
exit: Remove profile_task_exit & profile_munmap
signal: clean up kernel-doc comments
signal: Remove the helper signal_group_exit
signal: Rename group_exit_task group_exec_task
coredump: Stop setting signal->group_exit_task
signal: Remove SIGNAL_GROUP_COREDUMP
signal: During coredumps set SIGNAL_GROUP_EXIT in zap_process
signal: Make coredump handling explicit in complete_signal
signal: Have prepare_signal detect coredumps using signal->core_state
signal: Have the oom killer detect coredumps using signal->core_state
exit: Move force_uaccess back into do_exit
exit: Guarantee make_task_dead leaks the tsk when calling do_task_exit
...
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAmHhbrwACgkQUqAMR0iA
lPJkAg//ZSvlc/dB7LdAiVmc2JBnDC49yxn7OguCW6t5T8RmVuaurPa/ZNDcZomw
tbT7QSjndg0LHAGiWRrjGzQZ89D7/cbTzOxz821F0LLFDjiEMbUB+tCYznHud1cP
5+83QMwAkpME+RAj471SAHlhGAGJ3YKgFBbUP9sHSbtQqXzLGHBl4MluMh1wpVPq
K1lyVG8TaOCXhWtpuO8MVrz7Q52qqi/85fHZKbQq9Tm5x+nDxVfGw24QcrkQB/Il
4B2T5UP9rzbHQYemc0hascLMJc1mxcFMtK8WKH48cPEL+kQarvsRn6fvVlCxdNUe
ZgQfhixDQPQyC0/CaN7qM9EOpKbwoY8+Lc36kq06YMAJj/NPa4LE/1j2DyRvaein
lJ2vy/E/TdaR71pApL02P5BeU4XAmhm10D/Qpj0pgRuERYVayNE/7wqzyrae7mqm
8zgpUDftGS6BXnwmRWmgFYI5bZWVfzwGjs+JjKIDXPhWHZInpOCkHGCehvabd+4U
02jwCAmKmpkhAxslm2579CZ0+VFK52z5mUwrWwsxhflUD1q3dNj7CAtPKYLqw5Xe
iz2rrulDlwVll5pdbRf18A/+I2YSdz8pDwCpI6WKggompd6r+du3Y/GTGTBhoRcD
L9Q/rENx1gpJgdZYL5zefKlrjMSQhdwp3CRk34DEronTTkty5mc=
=fTdn
-----END PGP SIGNATURE-----
Merge tag 'livepatching-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching updates from Petr Mladek:
- Correctly handle kobjects when a livepatch init fails
- Avoid CPU hogging when searching for many livepatched symbols
- Add livepatch API page into documentation
* tag 'livepatching-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
livepatch: Avoid CPU hogging with cond_resched
livepatch: Fix missing unlock on error in klp_enable_patch()
livepatch: Fix kobject refcount bug on klp_init_patch_early failure path
Documentation: livepatch: Add livepatch API page
The new flag MODULE_INIT_COMPRESSED_FILE unintentionally trips check in
module_sig_check(). The check was supposed to catch case when version
info or magic was removed from a signed module, making signature
invalid, but it was coded too broadly and was catching this new flag as
well.
Change the check to only test the 2 particular flags affecting signature
validity.
Fixes: b1ae6dc41e ("module: add in-kernel support for decompressing")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Current scheme of having userspace decompress kernel modules before
loading them into the kernel runs afoul of LoadPin security policy, as
it loses link between the source of kernel module on the disk and binary
blob that is being loaded into the kernel. To solve this issue let's
implement decompression in kernel, so that we can pass a file descriptor
of compressed module file into finit_module() which will keep LoadPin
happy.
To let userspace know what compression/decompression scheme kernel
supports it will create /sys/module/compression attribute. kmod can read
this attribute and decide if it can pass compressed file to
finit_module(). New MODULE_INIT_COMPRESSED_DATA flag indicates that the
kernel should attempt to decompress the data read from file descriptor
prior to trying load the module.
To simplify things kernel will only implement single decompression
method matching compression method selected when generating modules.
This patch implements gzip and xz; more can be added later,
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Since commit e513cc1c07 ("module: Remove stop_machine from module
unloading") this comment is no longer correct. Remove it.
Signed-off-by: Yu Chen <chen.yu@easystack.cn>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
When initializing a 'struct klp_object' in klp_init_object_loaded(), and
performing relocations in klp_resolve_symbols(), klp_find_object_symbol()
is invoked to look up the address of a symbol in an already-loaded module
(or vmlinux). This, in turn, calls kallsyms_on_each_symbol() or
module_kallsyms_on_each_symbol() to find the address of the symbol that is
being patched.
It turns out that symbol lookups often take up the most CPU time when
enabling and disabling a patch, and may hog the CPU and cause other tasks
on that CPU's runqueue to starve -- even in paths where interrupts are
enabled. For example, under certain workloads, enabling a KLP patch with
many objects or functions may cause ksoftirqd to be starved, and thus for
interrupts to be backlogged and delayed. This may end up causing TCP
retransmits on the host where the KLP patch is being applied, and in
general, may cause any interrupts serviced by softirqd to be delayed while
the patch is being applied.
So as to ensure that kallsyms_on_each_symbol() does not end up hogging the
CPU, this patch adds a call to cond_resched() in kallsyms_on_each_symbol()
and module_kallsyms_on_each_symbol(), which are invoked when doing a symbol
lookup in vmlinux and a module respectively. Without this patch, if a
live-patch is applied on a 36-core Intel host with heavy TCP traffic, a
~10x spike is observed in TCP retransmits while the patch is being applied.
Additionally, collecting sched events with perf indicates that ksoftirqd is
awakened ~1.3 seconds before it's eventually scheduled. With the patch, no
increase in TCP retransmit events is observed, and ksoftirqd is scheduled
shortly after it's awakened.
Signed-off-by: David Vernet <void@manifault.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20211229215646.830451-1-void@manifault.com
Update module_put_and_exit to call kthread_exit instead of do_exit.
Change the name to reflect this change in functionality. All of the
users of module_put_and_exit are causing the current kthread to exit
so this change makes it clear what is happening. There is no
functional change.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
elf_validity_check() checks ELF headers for errors and ELF Spec.
compliance and if any of them fail it returns -ENOEXEC from all of
these error paths. Almost all of them don't print any messages.
When elf_validity_check() returns an error, load_module() prints an
error message without error code. It is hard to determine why the
module ELF structure is invalid, even if load_module() prints the
error code which is -ENOEXEC in all of these cases.
Change to print useful error messages from elf_validity_check() to
clearly say what went wrong and why the ELF validity checks failed.
Remove the load_module() error message which is no longer needed.
This patch includes changes to fix build warns on 32-bit platforms:
warning: format '%llu' expects argument of type 'long long unsigned int',
but argument 3 has type 'Elf32_Off' {aka 'unsigned int'}
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
validate_section_offset() uses unsigned long local variable to
add/store shdr->sh_offset and shdr->sh_size on all platforms.
unsigned long is too short when sh_offset is Elf64_Off which
would be the case on 64bit ELF headers.
Without this fix applied we were shorting the design of modules
to have section headers placed within the 32-bit boundary (4 GiB)
instead of 64-bits when on 64-bit architectures (which allows for
up to 16,777,216 TiB). In practice this just meant we were limiting
modules sections to below 4 GiB even on 64-bit systems. This then
should not really affect any real-world use case as modules these
days obviously should likely never exceed 1 GiB in size overall.
A specially crafted invalid module might succeed to skip validation
in validate_section_offset() due to this mistake, but in such case
no impact is observed through code inspection given the correct data
types are used for the copy of the module when needed on move_module()
when the section type is not SHT_NOBITS (which indicates no the
section occupies no space on the file).
Fix the overflow problem using the right size local variable when
CONFIG_64BIT is defined.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
[mcgrof: expand commit log with possible impact if not applied]
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
When CONFIG_MODULE_UNLOAD is disabled, the module->exit member
is not defined, causing a build failure:
kernel/module.c:4493:8: error: no member named 'exit' in 'struct module'
mod->exit = *exit;
add an #ifdef block around this.
Fixes: cf68fffb66 ("add support for Clang CFI")
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
We have a number of systems industry-wide that have a subset of their
functionality that works as follows:
1. Receive a message from local kmsg, serial console, or netconsole;
2. Apply a set of rules to classify the message;
3. Do something based on this classification (like scheduling a
remediation for the machine), rinse, and repeat.
As a couple of examples of places we have this implemented just inside
Facebook, although this isn't a Facebook-specific problem, we have this
inside our netconsole processing (for alarm classification), and as part
of our machine health checking. We use these messages to determine
fairly important metrics around production health, and it's important
that we get them right.
While for some kinds of issues we have counters, tracepoints, or metrics
with a stable interface which can reliably indicate the issue, in order
to react to production issues quickly we need to work with the interface
which most kernel developers naturally use when developing: printk.
Most production issues come from unexpected phenomena, and as such
usually the code in question doesn't have easily usable tracepoints or
other counters available for the specific problem being mitigated. We
have a number of lines of monitoring defence against problems in
production (host metrics, process metrics, service metrics, etc), and
where it's not feasible to reliably monitor at another level, this kind
of pragmatic netconsole monitoring is essential.
As one would expect, monitoring using printk is rather brittle for a
number of reasons -- most notably that the message might disappear
entirely in a new version of the kernel, or that the message may change
in some way that the regex or other classification methods start to
silently fail.
One factor that makes this even harder is that, under normal operation,
many of these messages are never expected to be hit. For example, there
may be a rare hardware bug which one wants to detect if it was to ever
happen again, but its recurrence is not likely or anticipated. This
precludes using something like checking whether the printk in question
was printed somewhere fleetwide recently to determine whether the
message in question is still present or not, since we don't anticipate
that it should be printed anywhere, but still need to monitor for its
future presence in the long-term.
This class of issue has happened on a number of occasions, causing
unhealthy machines with hardware issues to remain in production for
longer than ideal. As a recent example, some monitoring around
blk_update_request fell out of date and caused semi-broken machines to
remain in production for longer than would be desirable.
Searching through the codebase to find the message is also extremely
fragile, because many of the messages are further constructed beyond
their callsite (eg. btrfs_printk and other module-specific wrappers,
each with their own functionality). Even if they aren't, guessing the
format and formulation of the underlying message based on the aesthetics
of the message emitted is not a recipe for success at scale, and our
previous issues with fleetwide machine health checking demonstrate as
much.
This provides a solution to the issue of silently changed or deleted
printks: we record pointers to all printk format strings known at
compile time into a new .printk_index section, both in vmlinux and
modules. At runtime, this can then be iterated by looking at
<debugfs>/printk/index/<module>, which emits the following format, both
readable by humans and able to be parsed by machines:
$ head -1 vmlinux; shuf -n 5 vmlinux
# <level[,flags]> filename:line function "format"
<5> block/blk-settings.c:661 disk_stack_limits "%s: Warning: Device %s is misaligned\n"
<4> kernel/trace/trace.c:8296 trace_create_file "Could not create tracefs '%s' entry\n"
<6> arch/x86/kernel/hpet.c:144 _hpet_print_config "hpet: %s(%d):\n"
<6> init/do_mounts.c:605 prepare_namespace "Waiting for root device %s...\n"
<6> drivers/acpi/osl.c:1410 acpi_no_auto_serialize_setup "ACPI: auto-serialization disabled\n"
This mitigates the majority of cases where we have a highly-specific
printk which we want to match on, as we can now enumerate and check
whether the format changed or the printk callsite disappeared entirely
in userspace. This allows us to catch changes to printks we monitor
earlier and decide what to do about it before it becomes problematic.
There is no additional runtime cost for printk callers or printk itself,
and the assembly generated is exactly the same.
Signed-off-by: Chris Down <chris@chrisdown.name>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kees Cook <keescook@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Jessica Yu <jeyu@kernel.org> # for module.{c,h}
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/e42070983637ac5e384f17fbdbe86d19c7b212a5.1623775748.git.chris@chrisdown.name
Let's make kernel stacktraces easier to identify by including the build
ID[1] of a module if the stacktrace is printing a symbol from a module.
This makes it simpler for developers to locate a kernel module's full
debuginfo for a particular stacktrace. Combined with
scripts/decode_stracktrace.sh, a developer can download the matching
debuginfo from a debuginfod[2] server and find the exact file and line
number for the functions plus offsets in a stacktrace that match the
module. This is especially useful for pstore crash debugging where the
kernel crashes are recorded in something like console-ramoops and the
recovery kernel/modules are different or the debuginfo doesn't exist on
the device due to space concerns (the debuginfo can be too large for space
limited devices).
Originally, I put this on the %pS format, but that was quickly rejected
given that %pS is used in other places such as ftrace where build IDs
aren't meaningful. There was some discussions on the list to put every
module build ID into the "Modules linked in:" section of the stacktrace
message but that quickly becomes very hard to read once you have more than
three or four modules linked in. It also provides too much information
when we don't expect each module to be traversed in a stacktrace. Having
the build ID for modules that aren't important just makes things messy.
Splitting it to multiple lines for each module quickly explodes the number
of lines printed in an oops too, possibly wrapping the warning off the
console. And finally, trying to stash away each module used in a
callstack to provide the ID of each symbol printed is cumbersome and would
require changes to each architecture to stash away modules and return
their build IDs once unwinding has completed.
Instead, we opt for the simpler approach of introducing new printk formats
'%pS[R]b' for "pointer symbolic backtrace with module build ID" and '%pBb'
for "pointer backtrace with module build ID" and then updating the few
places in the architecture layer where the stacktrace is printed to use
this new format.
Before:
Call trace:
lkdtm_WARNING+0x28/0x30 [lkdtm]
direct_entry+0x16c/0x1b4 [lkdtm]
full_proxy_write+0x74/0xa4
vfs_write+0xec/0x2e8
After:
Call trace:
lkdtm_WARNING+0x28/0x30 [lkdtm 6c2215028606bda50de823490723dc4bc5bf46f9]
direct_entry+0x16c/0x1b4 [lkdtm 6c2215028606bda50de823490723dc4bc5bf46f9]
full_proxy_write+0x74/0xa4
vfs_write+0xec/0x2e8
[akpm@linux-foundation.org: fix build with CONFIG_MODULES=n, tweak code layout]
[rdunlap@infradead.org: fix build when CONFIG_MODULES is not set]
Link: https://lkml.kernel.org/r/20210513171510.20328-1-rdunlap@infradead.org
[akpm@linux-foundation.org: make kallsyms_lookup_buildid() static]
[cuibixuan@huawei.com: fix build error when CONFIG_SYSFS is disabled]
Link: https://lkml.kernel.org/r/20210525105049.34804-1-cuibixuan@huawei.com
Link: https://lkml.kernel.org/r/20210511003845.2429846-6-swboyd@chromium.org
Link: https://fedoraproject.org/wiki/Releases/FeatureBuildId [1]
Link: https://sourceware.org/elfutils/Debuginfod.html [2]
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Evan Green <evgreen@chromium.org>
Cc: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Summary of modules changes for the 5.14 merge window:
- Fix incorrect logic in module_kallsyms_on_each_symbol()
- Fix for a Coccinelle warning
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=/zzN
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module updates from Jessica Yu:
- Fix incorrect logic in module_kallsyms_on_each_symbol()
- Fix for a Coccinelle warning
* tag 'modules-for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: correctly exit module_kallsyms_on_each_symbol when fn() != 0
kernel/module: Use BUG_ON instead of if condition followed by BUG
Irrespective as to whether CONFIG_MODULE_SIG is configured, specifying
"module.sig_enforce=1" on the boot command line sets "sig_enforce".
Only allow "sig_enforce" to be set when CONFIG_MODULE_SIG is configured.
This patch makes the presence of /sys/module/module/parameters/sig_enforce
dependent on CONFIG_MODULE_SIG=y.
Fixes: fda784e50a ("module: export module signature enforcement status")
Reported-by: Nayna Jain <nayna@linux.ibm.com>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Tested-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 013c1667cf ("kallsyms: refactor
{,module_}kallsyms_on_each_symbol") replaced the return inside the
nested loop with a break, changing the semantics of the function: the
break only exits the innermost loop, so the code continues iterating the
symbols of the next module instead of exiting.
Fixes: 013c1667cf ("kallsyms: refactor {,module_}kallsyms_on_each_symbol")
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Jon Mediero <jmdr@disroot.org>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Previously, when CONFIG_MODULE_UNLOAD=n, the module loader just does not
attempt to load exit sections since it never expects that any code in those
sections will ever execute. However, dynamic code patching (alternatives,
jump_label and static_call) can have sites in __exit code, even if __exit is
never executed. Therefore __exit must be present at runtime, at least for as
long as __init code is.
Commit 33121347fb ("module: treat exit sections the same as init
sections when !CONFIG_MODULE_UNLOAD") solves the requirements of
jump_labels and static_calls by putting the exit sections in the init
region of the module so that they are at least present at init, and
discarded afterwards. It does this by including a check for exit
sections in module_init_section(), so that it also returns true for exit
sections, and the module loader will automatically sort them in the init
region of the module.
However, the solution there was not completely arch-independent. ARM is
a special case where it supplies its own module_{init, exit}_section()
functions. Instead of pushing the exit section checks into
module_init_section(), just implement the exit section check in
layout_sections(), so that we don't have to touch arch-dependent code.
Fixes: 33121347fb ("module: treat exit sections the same as init sections when !CONFIG_MODULE_UNLOAD")
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Fix the following coccinelle report:
kernel/module.c:1018:2-5:
WARNING: Use BUG_ON instead of if condition followed by BUG.
BUG_ON uses unlikely in if(). Through disassembly, we can see that
brk #0x800 is compiled to the end of the function.
As you can see below:
......
ffffff8008660bec: d65f03c0 ret
ffffff8008660bf0: d4210000 brk #0x800
Usually, the condition in if () is not satisfied. For the
multi-stage pipeline, we do not need to perform fetch decode
and excute operation on brk instruction.
In my opinion, this can improve the efficiency of the
multi-stage pipeline.
Signed-off-by: zhouchuangao <zhouchuangao@vivo.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
- Fix an age old bug involving jump_calls and static_labels when
CONFIG_MODULE_UNLOAD=n. When CONFIG_MODULE_UNLOAD=n, it means you
can't unload modules, so normally the __exit sections of a module are
not loaded at all. However, dynamic code patching (jump_label,
static_call, alternatives) can have sites in __exit sections even if
__exit is never executed.
Reported by Peter Zijlstra: "Alternatives, jump_labels and static_call
all can have relocations into __exit code. Not loading it at all would
be BAD." Therefore, load the __exit sections even when
CONFIG_MODULE_UNLOAD=n, and discard them after init.
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=zme0
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module updates from Jessica Yu:
"Fix an age old bug involving jump_calls and static_labels when
CONFIG_MODULE_UNLOAD=n.
When CONFIG_MODULE_UNLOAD=n, it means you can't unload modules, so
normally the __exit sections of a module are not loaded at all.
However, dynamic code patching (jump_label, static_call, alternatives)
can have sites in __exit sections even if __exit is never executed.
Reported by Peter Zijlstra:
'Alternatives, jump_labels and static_call all can have relocations
into __exit code. Not loading it at all would be BAD.'
Therefore, load the __exit sections even when CONFIG_MODULE_UNLOAD=n,
and discard them after init"
* tag 'modules-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: treat exit sections the same as init sections when !CONFIG_MODULE_UNLOAD
This change adds support for Clang’s forward-edge Control Flow
Integrity (CFI) checking. With CONFIG_CFI_CLANG, the compiler
injects a runtime check before each indirect function call to ensure
the target is a valid function with the correct static type. This
restricts possible call targets and makes it more difficult for
an attacker to exploit bugs that allow the modification of stored
function pointers. For more details, see:
https://clang.llvm.org/docs/ControlFlowIntegrity.html
Clang requires CONFIG_LTO_CLANG to be enabled with CFI to gain
visibility to possible call targets. Kernel modules are supported
with Clang’s cross-DSO CFI mode, which allows checking between
independently compiled components.
With CFI enabled, the compiler injects a __cfi_check() function into
the kernel and each module for validating local call targets. For
cross-module calls that cannot be validated locally, the compiler
calls the global __cfi_slowpath_diag() function, which determines
the target module and calls the correct __cfi_check() function. This
patch includes a slowpath implementation that uses __module_address()
to resolve call targets, and with CONFIG_CFI_CLANG_SHADOW enabled, a
shadow map that speeds up module look-ups by ~3x.
Clang implements indirect call checking using jump tables and
offers two methods of generating them. With canonical jump tables,
the compiler renames each address-taken function to <function>.cfi
and points the original symbol to a jump table entry, which passes
__cfi_check() validation. This isn’t compatible with stand-alone
assembly code, which the compiler doesn’t instrument, and would
result in indirect calls to assembly code to fail. Therefore, we
default to using non-canonical jump tables instead, where the compiler
generates a local jump table entry <function>.cfi_jt for each
address-taken function, and replaces all references to the function
with the address of the jump table entry.
Note that because non-canonical jump table addresses are local
to each component, they break cross-module function address
equality. Specifically, the address of a global function will be
different in each module, as it's replaced with the address of a local
jump table entry. If this address is passed to a different module,
it won’t match the address of the same function taken there. This
may break code that relies on comparing addresses passed from other
components.
CFI checking can be disabled in a function with the __nocfi attribute.
Additionally, CFI can be disabled for an entire compilation unit by
filtering out CC_FLAGS_CFI.
By default, CFI failures result in a kernel panic to stop a potential
exploit. CONFIG_CFI_PERMISSIVE enables a permissive mode, where the
kernel prints out a rate-limited warning instead, and allows execution
to continue. This option is helpful for locating type mismatches, but
should only be enabled during development.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210408182843.1754385-2-samitolvanen@google.com
Dynamic code patching (alternatives, jump_label and static_call) can
have sites in __exit code, even it __exit is never executed. Therefore
__exit must be present at runtime, at least for as long as __init code
is.
Additionally, for jump_label and static_call, the __exit sites must also
identify as within_module_init(), such that the infrastructure is aware
to never touch them after module init -- alternatives are only ran once
at init and hence don't have this particular constraint.
By making __exit identify as __init for MODULE_UNLOAD, the above is
satisfied.
So, when !CONFIG_MODULE_UNLOAD, the section ordering should look like the
following, with the .exit sections moved to the init region of the module.
Core section allocation order:
.text
.rodata
__ksymtab_gpl
__ksymtab_strings
.note.* sections
.bss
.data
.gnu.linkonce.this_module
Init section allocation order:
.init.text
.exit.text
.symtab
.strtab
[jeyu: thanks to Peter Zijlstra for most of changelog]
Link: https://lore.kernel.org/lkml/YFiuphGw0RKehWsQ@gunter/
Link: https://lore.kernel.org/r/20210323142756.11443-1-jeyu@kernel.org
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Smatch complains that:
kernel/module.c:4472 module_kallsyms_on_each_symbol()
error: uninitialized symbol 'ret'.
This warning looks like it could be correct if the &modules list is
empty.
Fixes: 013c1667cf ("kallsyms: refactor {,module_}kallsyms_on_each_symbol")
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
EXPORT_UNUSED_SYMBOL* is not actually used anywhere. Remove the
unused functionality as we generally just remove unused code anyway.
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
As far as I can tell this has never been used at all, and certainly
not any time recently.
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
struct symsearch is only used inside of module.h, so move the definition
out of module.h.
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Simplify the calling convention by passing the find_symbol_args structure
to find_symbol instead of initializing it inside the function.
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
each_symbol_section is only called by find_symbol, so merge the two
functions.
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
each_symbol_in_section just contains a trivial loop over its arguments.
Just open code the loop in the two callers.
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Except for two lockdep asserts module_mutex is only used in module.c.
Remove the two asserts given that the functions they are in are not
exported and just called from the module code, and mark module_mutex
static.
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
kallsyms_on_each_symbol and module_kallsyms_on_each_symbol are only used
by the livepatching code, so don't build them if livepatching is not
enabled.
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Require an explicit call to module_kallsyms_on_each_symbol to look
for symbols in modules instead of the call from kallsyms_on_each_symbol,
and acquire module_mutex inside of module_kallsyms_on_each_symbol instead
of leaving that up to the caller. Note that this slightly changes the
behavior for the livepatch code in that the symbols from vmlinux are not
iterated anymore if objname is set, but that actually is the desired
behavior in this case.
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Allow for a RCU-sched critical section around find_module, following
the lower level find_module_all helper, and switch the two callers
outside of module.c to use such a RCU-sched critical section instead
of module_mutex.
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
find_module is not used by modular code any more, and random driver code
has no business calling it to start with.
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
5fdc7db644 ("module: setup load info before module_sig_check()")
moved the ELF setup, so that it was done before the signature
check. This made the module name available to signature error
messages.
However, the checks for ELF correctness in setup_load_info
are not sufficient to prevent bad memory references due to
corrupted offset fields, indices, etc.
So, there's a regression in behavior here: a corrupt and unsigned
(or badly signed) module, which might previously have been rejected
immediately, can now cause an oops/crash.
Harden ELF handling for module loading by doing the following:
- Move the signature check back up so that it comes before ELF
initialization. It's best to do the signature check to see
if we can trust the module, before using the ELF structures
inside it. This also makes checks against info->len
more accurate again, as this field will be reduced by the
length of the signature in mod_check_sig().
The module name is now once again not available for error
messages during the signature check, but that seems like
a fair tradeoff.
- Check if sections have offset / size fields that at least don't
exceed the length of the module.
- Check if sections have section name offsets that don't fall
outside the section name table.
- Add a few other sanity checks against invalid section indices,
etc.
This is not an exhaustive consistency check, but the idea is to
at least get through the signature and blacklist checks without
crashing because of corrupted ELF info, and to error out gracefully
for most issues that would have caused problems later on.
Fixes: 5fdc7db644 ("module: setup load info before module_sig_check()")
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
clang-12 -fno-pic (since
a084c0388e)
can emit `call __stack_chk_fail@PLT` instead of `call __stack_chk_fail`
on x86. The two forms should have identical behaviors on x86-64 but the
former causes GNU as<2.37 to produce an unreferenced undefined symbol
_GLOBAL_OFFSET_TABLE_.
(On x86-32, there is an R_386_PC32 vs R_386_PLT32 difference but the
linker behavior is identical as far as Linux kernel is concerned.)
Simply ignore _GLOBAL_OFFSET_TABLE_ for now, like what
scripts/mod/modpost.c:ignore_undef_symbol does. This also fixes the
problem for gcc/clang -fpie and -fpic, which may emit `call foo@PLT` for
external function calls on x86.
Note: ld -z defs and dynamic loaders do not error for unreferenced
undefined symbols so the module loader is reading too much. If we ever
need to ignore more symbols, the code should be refactored to ignore
unreferenced symbols.
Cc: <stable@vger.kernel.org>
Link: https://github.com/ClangBuiltLinux/linux/issues/1250
Link: https://sourceware.org/bugzilla/show_bug.cgi?id=27178
Reported-by: Marco Elver <elver@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Marco Elver <elver@google.com>
Signed-off-by: Fangrui Song <maskray@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Summary of modules changes for the 5.11 merge window:
- Fix a race condition between systemd/udev and the module loader.
The module loader was sending a uevent before the module was fully
initialized (i.e., before its init function has been called). This means
udev can start processing the module uevent before the module has
finished initializing, and some udev rules expect that the module has
initialized already upon receiving the uevent. This resulted in some
systemd mount units failing if udev processes the event faster than the
module can finish init. This is fixed by delaying the uevent until after
the module has called its init routine.
- Make the linker array sections for kernel params and module version
attributes more robust by switching to use the alignment of the type in
question. Namely, linker section arrays will be constructed using the
alignment required by the struct (using __alignof__()) as opposed to a
specific value such as sizeof(void *) or sizeof(long). This is less
likely to cause breakages should the size of the type ever change (from
Johan Hovold)
- Fix module state inconsistency by setting it back to GOING when a module
fails to load and is on its way out (from Miroslav Benes)
- Some comment and code cleanups (from Sergey Shtylyov)
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=FAwZ
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull modules updates from Jessica Yu:
"Summary of modules changes for the 5.11 merge window:
- Fix a race condition between systemd/udev and the module loader.
The module loader was sending a uevent before the module was fully
initialized (i.e., before its init function has been called). This
means udev can start processing the module uevent before the module
has finished initializing, and some udev rules expect that the
module has initialized already upon receiving the uevent.
This resulted in some systemd mount units failing if udev processes
the event faster than the module can finish init. This is fixed by
delaying the uevent until after the module has called its init
routine.
- Make the linker array sections for kernel params and module version
attributes more robust by switching to use the alignment of the
type in question.
Namely, linker section arrays will be constructed using the
alignment required by the struct (using __alignof__()) as opposed
to a specific value such as sizeof(void *) or sizeof(long). This is
less likely to cause breakages should the size of the type ever
change (Johan Hovold)
- Fix module state inconsistency by setting it back to GOING when a
module fails to load and is on its way out (Miroslav Benes)
- Some comment and code cleanups (Sergey Shtylyov)"
* tag 'modules-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: delay kobject uevent until after module init call
module: drop semicolon from version macro
init: use type alignment for kernel parameters
params: clean up module-param macros
params: use type alignment for kernel parameters
params: drop redundant "unused" attributes
module: simplify version-attribute handling
module: drop version-attribute alignment
module: fix comment style
module: add more 'kernel-doc' comments
module: fix up 'kernel-doc' comments
module: only handle errors with the *switch* statement in module_sig_check()
module: avoid *goto*s in module_sig_check()
module: merge repetitive strings in module_sig_check()
module: set MODULE_STATE_GOING state when a module fails to load
Apparently there has been a longstanding race between udev/systemd and
the module loader. Currently, the module loader sends a uevent right
after sysfs initialization, but before the module calls its init
function. However, some udev rules expect that the module has
initialized already upon receiving the uevent.
This race has been triggered recently (see link in references) in some
systemd mount unit files. For instance, the configfs module creates the
/sys/kernel/config mount point in its init function, however the module
loader issues the uevent before this happens. sys-kernel-config.mount
expects to be able to mount /sys/kernel/config upon receipt of the
module loading uevent, but if the configfs module has not called its
init function yet, then this directory will not exist and the mount unit
fails. A similar situation exists for sys-fs-fuse-connections.mount, as
the fuse sysfs mount point is created during the fuse module's init
function. If udev is faster than module initialization then the mount
unit would fail in a similar fashion.
To fix this race, delay the module KOBJ_ADD uevent until after the
module has finished calling its init routine.
References: https://github.com/systemd/systemd/issues/17586
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-By: Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Having real btf_data_size stored in struct module is benefitial to quickly
determine which kernel modules have associated BTF object and which don't.
There is no harm in keeping this info, as opposed to keeping invalid pointer.
Fixes: 607c543f93 ("bpf: Sanitize BTF data pointer after module is loaded")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-3-andrii@kernel.org
Given .BTF section is not allocatable, it will get trimmed after module is
loaded. BPF system handles that properly by creating an independent copy of
data. But prevent any accidental misused by resetting the pointer to BTF data.
Fixes: 36e68442d1 ("bpf: Load and verify kernel module BTFs")
Suggested-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jessica Yu <jeyu@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/bpf/20201121070829.2612884-2-andrii@kernel.org
Add kernel module listener that will load/validate and unload module BTF.
Module BTFs gets ID generated for them, which makes it possible to iterate
them with existing BTF iteration API. They are given their respective module's
names, which will get reported through GET_OBJ_INFO API. They are also marked
as in-kernel BTFs for tooling to distinguish them from user-provided BTFs.
Also, similarly to vmlinux BTF, kernel module BTFs are exposed through
sysfs as /sys/kernel/btf/<module-name>. This is convenient for user-space
tools to inspect module BTF contents and dump their types with existing tools:
[vmuser@archvm bpf]$ ls -la /sys/kernel/btf
total 0
drwxr-xr-x 2 root root 0 Nov 4 19:46 .
drwxr-xr-x 13 root root 0 Nov 4 19:46 ..
...
-r--r--r-- 1 root root 888 Nov 4 19:46 irqbypass
-r--r--r-- 1 root root 100225 Nov 4 19:46 kvm
-r--r--r-- 1 root root 35401 Nov 4 19:46 kvm_intel
-r--r--r-- 1 root root 120 Nov 4 19:46 pcspkr
-r--r--r-- 1 root root 399 Nov 4 19:46 serio_raw
-r--r--r-- 1 root root 4094095 Nov 4 19:46 vmlinux
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/bpf/20201110011932.3201430-5-andrii@kernel.org
Many comments in this module do not comply with the preferred multi-line
comment style as reported by 'scripts/checkpatch.pl':
WARNING: Block comments use * on subsequent lines
WARNING: Block comments use a trailing */ on a separate line
Fix those comments, along with (unreported for some reason?) the starts
of the multi-line comments not being /* on their own line...
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Some functions have the proper 'kernel-doc' comments but these don't start
with proper /** -- fix that, along with adding () to the function name on
the following lines to fully comply with the 'kernel-doc' format.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Some 'kernel-doc' function comments do not fully comply with the specified
format due to:
- missing () after the function name;
- "RETURNS:"/"Returns:" instead of "Return:" when documenting the function's
result.
- empty line before describing the function's arguments.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Let's handle the successful call of mod_verify_sig() right after that call,
making the *switch* statement only handle the real errors, and then move
the comment from the first *case* before *switch* itself and the comment
before *default* after it. Fix the comment style, add article/comma/dash,
spell out "nomem" as "lack of memory" in these comments, while at it...
Suggested-by: Joe Perches <joe@perches.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Let's move the common handling of the non-fatal errors after the *switch*
statement -- this avoids *goto*s inside that *switch*...
Suggested-by: Joe Perches <joe@perches.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
The 'reason' variable in module_sig_check() points to 3 strings across
the *switch* statement, all needlessly starting with the same text.
Let's put the starting text into the pr_notice() call -- it saves 21
bytes of the object code (x86 gcc 10.2.1).
Suggested-by: Joe Perches <joe@perches.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
If a module fails to load due to an error in prepare_coming_module(),
the following error handling in load_module() runs with
MODULE_STATE_COMING in module's state. Fix it by correctly setting
MODULE_STATE_GOING under "bug_cleanup" label.
Signed-off-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Here is the big set of char, misc, and other assorted driver subsystem
patches for 5.10-rc1.
There's a lot of different things in here, all over the drivers/
directory. Some summaries:
- soundwire driver updates
- habanalabs driver updates
- extcon driver updates
- nitro_enclaves new driver
- fsl-mc driver and core updates
- mhi core and bus updates
- nvmem driver updates
- eeprom driver updates
- binder driver updates and fixes
- vbox minor bugfixes
- fsi driver updates
- w1 driver updates
- coresight driver updates
- interconnect driver updates
- misc driver updates
- other minor driver updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX4g8YQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yngKgCeNpArCP/9vQJRK9upnDm8ZLunSCUAn1wUT/2A
/bTQ42c/WRQ+LU828GSM
=6sO2
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char, misc, and other assorted driver subsystem
patches for 5.10-rc1.
There's a lot of different things in here, all over the drivers/
directory. Some summaries:
- soundwire driver updates
- habanalabs driver updates
- extcon driver updates
- nitro_enclaves new driver
- fsl-mc driver and core updates
- mhi core and bus updates
- nvmem driver updates
- eeprom driver updates
- binder driver updates and fixes
- vbox minor bugfixes
- fsi driver updates
- w1 driver updates
- coresight driver updates
- interconnect driver updates
- misc driver updates
- other minor driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (396 commits)
binder: fix UAF when releasing todo list
docs: w1: w1_therm: Fix broken xref, mistakes, clarify text
misc: Kconfig: fix a HISI_HIKEY_USB dependency
LSM: Fix type of id parameter in kernel_post_load_data prototype
misc: Kconfig: add a new dependency for HISI_HIKEY_USB
firmware_loader: fix a kernel-doc markup
w1: w1_therm: make w1_poll_completion static
binder: simplify the return expression of binder_mmap
test_firmware: Test partial read support
firmware: Add request_partial_firmware_into_buf()
firmware: Store opt_flags in fw_priv
fs/kernel_file_read: Add "offset" arg for partial reads
IMA: Add support for file reads without contents
LSM: Add "contents" flag to kernel_read_file hook
module: Call security_kernel_post_load_data()
firmware_loader: Use security_post_load_data()
LSM: Introduce kernel_post_load_data() hook
fs/kernel_read_file: Add file_size output argument
fs/kernel_read_file: Switch buffer size arg to size_t
fs/kernel_read_file: Remove redundant size argument
...
Igor Pylypiv
Linus Torvalds
Dmitry Torokhov
Yu Chen
David Vernet
Eric W. Biederman
Shuah Khan
Arnd Bergmann
Chris Down
Stephen Boyd
Mimi Zohar
Jon Mediero
Jessica Yu
zhouchuangao
Sami Tolvanen
Dan Carpenter
Christoph Hellwig
Frank van der Linden
Fangrui Song
Andrii Nakryiko
Sergey Shtylyov
Miroslav Benes