At high sampling transfer frequency, TC Electronic Konnekt Live
transfers/receives 6 audio data frames in multi bit linear audio data
channel of data block in CIP payload. Current hard-coded stream format
is wrong.
Cc: <stable@vger.kernel.org>
Fixes: f1f0f330b1 ("ALSA: dice: add parameters of stream formats for models produced by TC Electronic")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210518012612.37268-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA dice driver detects jumbo payload at high sampling transfer frequency
for below models:
* Avid M-Box 3 Pro
* M-Audio Profire 610
* M-Audio Profire 2626
Although many DICE-based devices have a quirk at high sampling transfer
frequency to multiplex double number of PCM frames into data block than
the number in IEC 61883-1/6, the above devices are just compliant to
IEC 61883-1/6.
This commit disables the mode of double_pcm_frames for the models.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210518012510.37126-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The snd_firewire_lib:amdtp_packet tracepoints event includes index of
packet processed in a context handling. However in IR context, it is not
calculated as expected.
Cc: <stable@vger.kernel.org>
Fixes: 753e717986 ("ALSA: firewire-lib: use packet descriptor for IR context")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210513125652.110249-6-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The quadlets for CIP header is handled as a part of IR context header,
thus it doesn't join in IR context payload. However current calculation
includes the quadlets in IR context payload.
Cc: <stable@vger.kernel.org>
Fixes: f11453c7cc ("ALSA: firewire-lib: use 16 bytes IR context header to separate CIP header")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210513125652.110249-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The check for size of isochronous packet payload just cares of the size of
IR context payload without the size of CIP header.
Cc: <stable@vger.kernel.org>
Fixes: f11453c7cc ("ALSA: firewire-lib: use 16 bytes IR context header to separate CIP header")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210513125652.110249-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Mackie d.2 has an extension card for IEEE 1394 communication, which uses
BridgeCo DM1000 ASIC. On the other hand, Mackie d.4 Pro has built-in
function for IEEE 1394 communication by Oxford Semiconductor OXFW971,
according to schematic diagram available in Mackie website. Although I
misunderstood that Mackie d.2 Pro would be also a model with OXFW971,
it's wrong. Mackie d.2 Pro is a model which includes the extension card
as factory settings.
This commit fixes entries in Kconfig and comment in ALSA OXFW driver.
Cc: <stable@vger.kernel.org>
Fixes: fd6f4b0dc1 ("ALSA: bebob: Add skelton for BeBoB based devices")
Fixes: ec4dba5053 ("ALSA: oxfw: Add support for Behringer/Mackie devices")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210513125652.110249-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Alesis iO 26 FireWire has two pairs of digital optical interface. It
delivers PCM frames from the interfaces by second isochronous packet
streaming. Although both of the interfaces are available at 44.1/48.0
kHz, first one of them is only available at 88.2/96.0 kHz. It reduces
the number of PCM samples to 4 in Multi Bit Linear Audio data channel
of data blocks on the second isochronous packet streaming.
This commit fixes hardcoded stream formats.
Cc: <stable@vger.kernel.org>
Fixes: 28b208f600 ("ALSA: dice: add parameters of stream formats for models produced by Alesis")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210513125652.110249-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patchset tries to resolve the diversity in the audio LED
control among the ALSA drivers. A new control layer registration
is introduced which allows to run additional operations on
top of the elementary ALSA sound controls.
A new control access group (three bits in the access flags)
was introduced to carry the LED group information for
the sound controls. The low-level sound drivers can just
mark those controls using this access group. This information
is not exported to the user space, but user space can
manage the LED sound control associations through sysfs
(last patch) per Mark's request. It makes things fully
configurable in the kernel and user space (UCM).
The actual state ('route') evaluation is really easy
(the minimal value check for all channels / controls / cards).
If there's more complicated logic for a given hardware,
the card driver may eventually export a new read-only
sound control for the LED group and do the logic itself.
The new LED trigger control code is completely separated
and possibly optional (there's no symbol dependency).
The full code separation allows eventually to move this
LED trigger control to the user space in future.
Actually it replaces the already present functionality
in the kernel space (HDA drivers) and allows a quick adoption
for the recent hardware (ASoC codecs including SoundWire).
snd_ctl_led 24576 0
The sound driver implementation is really easy:
1) call snd_ctl_led_request() when control LED layer should be
automatically activated
/ it calls module_request("snd-ctl-led") on demand /
2) mark all related kcontrols with
SNDRV_CTL_ELEM_ACCESS_SPK_LED or
SNDRV_CTL_ELEM_ACCESS_MIC_LED
Link: https://lore.kernel.org/r/20210317172945.842280-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-----BEGIN PGP SIGNATURE-----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=1uM7
-----END PGP SIGNATURE-----
Merge tag 'tags/mute-led-rework' into for-next
ALSA: control - add generic LED API
This patchset tries to resolve the diversity in the audio LED
control among the ALSA drivers. A new control layer registration
is introduced which allows to run additional operations on
top of the elementary ALSA sound controls.
A new control access group (three bits in the access flags)
was introduced to carry the LED group information for
the sound controls. The low-level sound drivers can just
mark those controls using this access group. This information
is not exported to the user space, but user space can
manage the LED sound control associations through sysfs
(last patch) per Mark's request. It makes things fully
configurable in the kernel and user space (UCM).
The actual state ('route') evaluation is really easy
(the minimal value check for all channels / controls / cards).
If there's more complicated logic for a given hardware,
the card driver may eventually export a new read-only
sound control for the LED group and do the logic itself.
The new LED trigger control code is completely separated
and possibly optional (there's no symbol dependency).
The full code separation allows eventually to move this
LED trigger control to the user space in future.
Actually it replaces the already present functionality
in the kernel space (HDA drivers) and allows a quick adoption
for the recent hardware (ASoC codecs including SoundWire).
snd_ctl_led 24576 0
The sound driver implementation is really easy:
1) call snd_ctl_led_request() when control LED layer should be
automatically activated
/ it calls module_request("snd-ctl-led") on demand /
2) mark all related kcontrols with
SNDRV_CTL_ELEM_ACCESS_SPK_LED or
SNDRV_CTL_ELEM_ACCESS_MIC_LED
Link: https://lore.kernel.org/r/20210317172945.842280-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Current implementation of bebob driver doesn't correctly handle the case
that the device has multiple MIDI ports. The cause is the number of MIDI
conformant data channels is passed to AM824 data block processing layer.
This commit fixes the bug.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210321032831.340278-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Current implementation counts the number of input/output plugs for MIDI
type and uses the count as the number of physical MIDI ports. However,
the number of channels of the port represents the count.
This commit fixes the bug by additional vendor-specific AVC command
extension.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210321032831.340278-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA bebob driver scans supported formats of packet for each direction
when probing the target device. Some helper functions are used for the
scanning, however its implementation is not necessarily irredundant.
This commit refactors the helper functions to remove redundant codes.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210321032831.340278-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When node is removed from IEEE 1394 bus, any transaction fails to the node.
In the case, ALSA dice driver doesn't stop isochronous contexts even if
they are running. As a result, null pointer dereference occurs in callback
from the running context.
This commit fixes the bug to release isochronous contexts always.
Cc: <stable@vger.kernel.org> # v5.4 or later
Fixes: e9f21129b8 ("ALSA: dice: support AMDTP domain")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210312093407.23437-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fireface UCX, UFX, and FF802 are categorized for latter protocol of the
series. Current support for FF802 (and UFX) includes failure to parse
sync status register and results in EIO.
Further investigation figures out that the content of register differs
depending on models. This commit adds tables specific to FF802 and UFX
to fix it.
Fixes: 062bb452b0 ("ALSA: fireface: add support for RME FireFace 802")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210207154736.229551-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Drivers in ALSA firewire stack supports eventing to userspace
applications via ALSA hwdep interface. All of the drivers supports stream
lock events. Some of them supports their unique events according to
specification of target device.
ALSA bebob driver supports the stream lock event only. In the case, it's
enough to check condition only in loop with process blocking. However,
current implementation check it again after breaking the loop.
This commit removes the redundant check.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210125140208.26318-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Smatch complains that "count" is not clamped when "ff->dev_lock_changed"
and it leads to an information leak. Fortunately, that's not actually
possible and the condition can be deleted.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/YA6n6I8EcNAO5ZFs@mwanda
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Smatch complains that "count" isn't clamped properly and
"oxfw->dev_lock_changed" is false then it leads to an information
leak. But it turns out that "oxfw->dev_lock_changed" is always
set and the condition can be removed.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/YA6ntkBxT/4DJ4YK@mwanda
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As snd_fw_async_midi_port.consume_bytes is unsigned int, and
NSEC_PER_SEC is 1000000000L, the second multiplication in
port->consume_bytes * 8 * NSEC_PER_SEC / 31250
always overflows on 32-bit platforms, truncating the result. Fix this
by precalculating "NSEC_PER_SEC / 31250", which is an integer constant.
Note that this assumes port->consume_bytes <= 16777.
Fixes: 531f471834 ("ALSA: firewire-lib/firewire-tascam: localize async midi port")
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210111130251.361335-3-geert+renesas@glider.be
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As snd_ff.rx_bytes[] is unsigned int, and NSEC_PER_SEC is 1000000000L,
the second multiplication in
ff->rx_bytes[port] * 8 * NSEC_PER_SEC / 31250
always overflows on 32-bit platforms, truncating the result. Fix this
by precalculating "NSEC_PER_SEC / 31250", which is an integer constant.
Note that this assumes ff->rx_bytes[port] <= 16777.
Fixes: 1917429578 ("ALSA: fireface: add transaction support")
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210111130251.361335-2-geert+renesas@glider.be
Signed-off-by: Takashi Iwai <tiwai@suse.de>
strlcpy is deprecated. see: Documentation/process/deprecated.rst
Change the calls that do not use the strlcpy return value to the
preferred strscpy.
Done with cocci script:
@@
expression e1, e2, e3;
@@
- strlcpy(
+ strscpy(
e1, e2, e3);
This cocci script leaves the instances where the return value is
used unchanged.
After this patch, sound/ has 3 uses of strlcpy() that need to be
manually inspected for conversion and changed one day.
$ git grep -w strlcpy sound/
sound/usb/card.c: len = strlcpy(card->longname, s, sizeof(card->longname));
sound/usb/mixer.c: return strlcpy(buf, p->name, buflen);
sound/usb/mixer.c: return strlcpy(buf, p->names[index], buflen);
Miscellenea:
o Remove trailing whitespace in conversion of sound/core/hwdep.c
Link: https://lore.kernel.org/lkml/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/22b393d1790bb268769d0bab7bacf0866dcb0c14.camel@perches.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The spin_lock/unlock_irq() functions cannot be nested. The problem is
that presumably we would want the IRQs to be re-enabled on the second
call the spin_unlock_irq() but instead it will be enabled at the first
call so IRQs will be enabled earlier than expected.
In this situation the copy_resp_to_buf() function is only called from
one function and it is called with IRQs disabled. We can just use
the regular spin_lock/unlock() functions.
Fixes: 555e8a8f7f ("ALSA: fireworks: Add command/response functionality into hwdep interface")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201113101241.GB168908@mwanda
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Replace commas with semicolons. What is done is essentially described by
the following Coccinelle semantic patch (http://coccinelle.lip6.fr/):
// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/1602407979-29038-5-git-send-email-Julia.Lawall@inria.fr
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The "count" variable needs to be capped on every path so that we don't
copy too much information to the user.
Fixes: 618eabeae7 ("ALSA: bebob: Add hwdep interface")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201007074928.GA2529578@mwanda
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The tasklet is an old API that should be deprecated, usually can be
converted to another decent API. In FireWire driver, a tasklet is
still used for offloading the AMDTP PCM stream handling. It can be
achieved gracefully with a work queued, too.
This patch replaces the tasklet usage in firewire-lib driver with a
simple work. The conversion is fairly straightforward but for the
in_interrupt() checks that are replaced with the check using the
current_work().
Note that in_interrupt() in amdtp_packet tracepoint is still kept as
is. This is the place that is probed by both softirq of 1394 OHCI and
a user task of a PCM application, and the work handling is already
filtered in amdtp_domain_stream_pcm_pointer().
Tested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200909163659.21708-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200902040221.354941-3-allen.lkml@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tascam FE-8 is known to support communication by asynchronous transaction
only. The support can be implemented in userspace application and
snd-firewire-ctl-services project has the support. However, ALSA
firewire-tascam driver is bound to the model.
This commit changes device entries so that the model is excluded. In a
commit 53b3ffee78 ("ALSA: firewire-tascam: change device probing
processing"), I addressed to the concern that version field in
configuration differs depending on installed firmware. However, as long
as I checked, the version number is fixed. It's safe to return version
number back to modalias.
Fixes: 53b3ffee78 ("ALSA: firewire-tascam: change device probing processing")
Cc: <stable@vger.kernel.org> # 4.4+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200823075537.56255-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It costs expensive to change clock configuration for models of protocol
version 3. In current implementation, speculative strategy is used to
finish the operation; just waiting for 4 seconds. As long as I investigate,
when accepting and changing clock status actually, the device sends
notification with mask.
This commit uses wise way to wait for the notification after changing
sampling clock rate during 4 seconds.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200614141221.53527-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit splits the method to switch fetching mode for protocol
version 2 so that model-dependent operations are explicitly defined.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200519111641.123211-15-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit splits the method to get clock source for protocol
version 3 so that model-dependent operations are explicitly defined.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200519111641.123211-14-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit splits the method to get clock source for protocol
version 2 so that model-dependent operations are explicitly defined.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200519111641.123211-13-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit adds alternative functions to detect packet format so that
each function corresponds to each model.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200519111641.123211-9-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit adds alternative functions to detect packet format so that
each function corresponds to each model.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200519111641.123211-8-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In MOTU protocol, data block consists of SPH and 24-bit chunks
aligned to quadlet. The number of chunks per data block is specific
to model. For models with optical interface, the number differs
depending on I/O settings for the interface (ADAT, TOSLINK).
Currently the number is calculated from flags in model-specific
data. However this is weak in the case that the model has quirks.
Actually, for quirks of some models, flags are used against their
original meanings.
This commit adds model-specific table of chunk count. For future
integration, this table is based on the calculation.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200519111641.123211-7-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The most of members in spec data is used in each protocol file. It's
better to capsulate the data to the file.
This commit moves the data to the file for protocol version 3.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200519111641.123211-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The most of members in spec data is used in each protocol file. It's
better to capsulate the data to the file.
This commit moves the data to the file for protocol version 2.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200519111641.123211-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is trivial commit but fulfill missing entries in Kconfig for devices
supported by ALSA firewire-motu driver.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200511022540.161363-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fireface UFX was shipped by RME GmbH in 2010, and now discontinued.
Although this model has some enhanced feature which Fireface 802
doesn't have (e.g. on-board USB mass storage device class, configuration
interface with color display), the functionality relevant to
packet communication on IEEE 1394 bus seems to be the same as
Fireface 802 (e.g. available number of channels for PCM frame in
each sampling transfer frequency).
With the assumption, this commit adds support for Fireface UFX. In ALSA
fireface driver, these two models are handled as the same one.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200510074301.116224-7-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fireface 802 was shipped by RME GmbH in 2014. This model supports later
protocol for management of isochronous communication and synchronization
of sampling transmission frequency.
This model consists of below ICs:
* TI TSB41AB2
* Xilinx Spartan-6 FPGA XC6SLX16
* TI TMS320 C6747
* SMSC USB3250
Especially, this model just supports IEEE 1394a, against its name which
evokes Fireface 800.
This commit adds support for Fireface 802 (tested). Userspace applications
can transfer PCM frames and MIDI messages via ALSA PCM/Rawmidi interface.
I note that 4 channels for ADAt1 and ADAT2 are disabled at higher sampling
transfer frequency since isochronous resources reservation fails due to
bandwidth limitation of IEEE 1394a.
The value read from LATTER_SYNC_STATUS register is slightly different
from the one of Fireface UCX. The higher 4 bits and lower 4 bits are
swapped within the same byte.
Without any assist of userspace application, transmitted MIDI messages
from the device are not going to be processed. For detail, please refer
to my comment in code of latter protocol.
$ python crpp < /sys/bus/firewire/devices/fw1/config_rom
ROM header and bus information block
-----------------------------------------------------------------
400 0404ffff bus_info_length 4, crc_length 4, crc 65535 (should be 26805)
404 31333934 bus_name "1394"
408 20008000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 8 (512)
40c 000a3504 company_id 000a35 |
410 38077423 device_id 0438077423 | EUI-64 000a350438077423
root directory
-----------------------------------------------------------------
414 0005ffff directory_length 5, crc 65535 (should be 9514)
418 0c0083c0 node capabilities per IEEE 1394
41c 03000a35 vendor
420 8100000b --> descriptor leaf at 44c
424 8d000007 --> eui-64 leaf at 440
428 d1000001 --> unit directory at 42c
unit directory at 42c
-----------------------------------------------------------------
42c 0004ffff directory_length 4, crc 65535 (should be 45134)
430 12000a35 specifier id
434 13000005 version
438 17101800 model
43c 81000008 --> descriptor leaf at 45c
eui-64 leaf at 440
-----------------------------------------------------------------
440 0002ffff leaf_length 2, crc 65535 (should be 60131)
444 000a3504 company_id 000a35 |
448 38077423 device_id 0438077423 | EUI-64 000a350438077423
descriptor leaf at 44c
-----------------------------------------------------------------
44c 0003ffff leaf_length 3, crc 65535 (should be 469)
450 00000000 textual descriptor
454 00000000 minimal ASCII
458 524d4521 "RME!"
descriptor leaf at 45c
-----------------------------------------------------------------
45c 0005ffff leaf_length 5, crc 65535 (should be 10561)
460 00000000 textual descriptor
464 00000000 minimal ASCII
468 46697265 "Fire"
46c 66616365 "face"
470 20383032 " 802"
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200510074301.116224-6-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In RME fireface series, version field of unit directory in configuration
ROM is used to distinguish each model. The value of field is known and
it's better to use enumeration constants for code representation.
This commit adds enumeration constants for model identification.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200510074301.116224-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In the latter models of RME Fireface series, device start to transfer
packets several dozens of milliseconds. On the other hand, ALSA fireface
driver starts IR context 2 milliseconds after the start. This results
in loss to handle incoming packets on the context.
This commit changes to start IR context immediately instead of
postponement. For Fireface 800, this affects nothing because the device
transfer packets 100 milliseconds or so after the start and this is
within wait timeout.
Cc: <stable@vger.kernel.org>
Fixes: acfedcbe1c ("ALSA: firewire-lib: postpone to start IR context")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200510074301.116224-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
128000 and 192000 are congruence modulo 32000, thus it's wrong to
distinguish them as multiple of 32000 and 48000 by modulo 32000 at
first.
Additionally, used condition statement to detect quadruple speed can
cause missing bit flag.
Furthermore, counter to ensure the configuration is wrong and it
causes false positive.
This commit fixes the above three bugs.
Cc: <stable@vger.kernel.org>
Fixes: 60aec494b3 ("ALSA: fireface: support allocate_resources operation in latter protocol")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200510074301.116224-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In previous commit, the sequence of syt offset and the number of data
blocks per packet is calculated for pool in AMDTP domain structure in
advance of processing outgoing packets.
This commit uses the sequence for outgoing packet processing to obsolete
per-stream processing of the sequence.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200508043635.349339-11-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In current implementation, sequence of syt offset and the number of data
blocks is generated when packets for outgoing stream are going to be
queued.
This commit generates and pools the sequence independently of the
processing of outgoing packets for future extension.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200508043635.349339-10-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For future extension, storage is required to store packet sequence in
incoming AMDTP stream to recover media clock for outgoing AMDTP stream.
This commit adds the storage to AMDTP domain for this purpose. The
packet sequence is represented by 'struct seq_desc' which has two
members; syt_offset and the number of data blocks. The size of storage
is decided according to the size of packet queue.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200508043635.349339-9-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When calculating the number of data blocks per packet, some states are
stored in AMDTP stream structure. This is inconvenient when reuse the
calculation from non-stream structure.
This commit applies refactoring to helper function for the calculation
so that the function doesn't touch AMDTP stream structure.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200508043635.349339-8-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When calculating syt offset, some states are stored in AMDTP stream
structure. This is inconvenient when reuse the calculation from
non-stream structure.
This commit applies refactoring to helper function for the calculation
so that the function doesn't touch AMDTP stream structure.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200508043635.349339-7-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In current implementation for outgoing AMDTP packet, the value of syt
field in CIP header is computed when calculating syt offset. For
future extension, it's convenient to split the computation and
calculation.
This commit splits them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200508043635.349339-6-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Although the parameter for packet queue and IRQ timing is calculated when
AMDTP stream starts, the calculated parameters are the same between
streams in AMDTP domain.
This commit moves the calculation and decide the parameters when AMDTP
domain starts.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200508043635.349339-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In current implementation, AMDTP domain structure and AMDTP stream
structure has one way of reference from the former to the latter. For
future extension, bidirectional reference is needed.
This commit adds a member into stream structure to refer to domain
structure to which the stream belongs.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200508043635.349339-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In descriptor of isochronous context in 1394 OHCI, the field of second
has 3 bit, thus the maximum value is 8. The value is used for correct
cycle calculation.
This commit replaces hard-coded value with macro to obsolete magic
number.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200508043635.349339-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Although the value of FDF is used just for outgoing stream, the assignment
to union member is done for both directions of stream. At present this
causes no issue because the value of same position is reassigned later for
opposite stream. However, it's better to add if statement.
Fixes: d3d10a4a1b ("ALSA: firewire-lib: use union for directional parameters")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200508043635.349339-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200507185245.GA14270@embeddedor
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The snd-firewire-lib.ko has 'amdtp-packet' event of tracepoints. Current
printk format for the event includes 'sizeof(u8)' macro expected to be
extended in compilation time. However, this is not done. As a result,
perf tools cannot parse the event for printing:
$ mount -l -t debugfs
debugfs on /sys/kernel/debug type debugfs (rw,nosuid,nodev,noexec,relatime)
$ cat /sys/kernel/debug/tracing/events/snd_firewire_lib/amdtp_packet/format
...
print fmt: "%02u %04u %04x %04x %02d %03u %02u %03u %02u %01u %02u %s",
REC->second, REC->cycle, REC->src, REC->dest, REC->channel,
REC->payload_quadlets, REC->data_blocks, REC->data_block_counter,
REC->packet_index, REC->irq, REC->index,
__print_array(__get_dynamic_array(cip_header),
__get_dynamic_array_len(cip_header),
sizeof(u8))
$ sudo perf record -e snd_firewire_lib:amdtp_packet
[snd_firewire_lib:amdtp_packet] function sizeof not defined
Error: expected type 5 but read 0
This commit fixes it by obsoleting the macro with actual size.
Cc: <stable@vger.kernel.org>
Fixes: bde2bbdb30 ("ALSA: firewire-lib: use dynamic array for CIP header of tracing events")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200503045718.86337-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Sparse reports a warning at tscm_hwdep_read_locked()
warning: context imbalance in tscm_hwdep_read_locked() - unexpected unlock
The root cause is the missing annotation at tscm_hwdep_read_locked()
Add the missing __releases(&tscm->lock) annotation
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200311010908.42366-9-jbi.octave@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Sparse reports a warning at tscm_hwdep_read_queue()
warning: context imbalance in tscm_hwdep_read_queue() - unexpected unlock
The root cause is the missing annotation at tscm_hwdep_read_queue()
Add the missing __releases(&tscm->lock) annotation
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200311010908.42366-8-jbi.octave@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
KBUILD_MODNAME is available to name kernel modules according to its object
name. This commit uses the macro instead of string for name field of
struct driver since drivers in ALSA firewire stack have the same name of
each object name.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200306135229.11659-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA dice driver expects devices to multiplex MIDI messages into first
port of isochronous communication. Actually devices perform for it.
However, check of stream format is invalid for second port of isochronous
communication. As a result, when the device supports two ports for
isochronous communication and the stream format is hard-coded, ALSA
dice driver fails to start packet streaming.
This commit loosens stream format check for MIDI conformant data channel.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200113084630.14305-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At failure of attempt to detect protocol extension, ALSA dice driver
should be fallback to limited functionality. However it's not.
This commit fixes it.
Cc: <stable@vger.kernel.org> # v4.18+
Fixes: 58579c056c ("ALSA: dice: use extended protocol to detect available stream formats")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200113084630.14305-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stanton SCS.1d uses Oxford Semiconductor FW 971 ASIC (FW971) for
communication. Although the unit is bound to ALSA oxfw driver, the instance
of sound card can not be added due to its quirk of plug information. This
bug was added when snd-scs1x is merged into snd-oxfw at commit
9e2004f9ce ("ALSA: oxfw: obsolete scs1x module").
This commit fixes the driver for the quirk. In cases that the unit returns
NOT IMPLEMENTED for some AV/C commands, the sound card is added without any
PCM/MIDI interfaces for packet streaming. For SCS.1d, model dependent
operation adds MIDI interface and applications can use it to operate
according to HSS1394 protocol from reverse-engineering work by Sean M.
Pappalardo.
Plug Control Register (PCR) has information that the unit has a pair of
plugs for isochronous communication:
(oMPR)
$ ./firewire-request /dev/fw1 read 0xfffff0000900
result: 80ff0001
(iMPR)
$ ./firewire-request /dev/fw1 read 0xfffff0000980
result: 80ff0001
AV/C PLUG INFO also returns information that the unit has a pair of
plugs for isochronous communication.
(AV/C PLUG INFO command)
$ ./firewire-request /dev/fw1 fcp 0x01ff0200ffffffff
response: 000: 0c ff 02 00 01 01 02 02
However, AV/C PLUG SIGNAL INFO command is rejected for both plugs.
(AV/C OUTPUT PLUG SIGNAL INFO command)
$ ./firewire-request /dev/fw1 fcp 0x01ff1800ffffffff
response: 000: 0a ff 18 00 ff ff ff ff
(AV/C INPUT PLUG SIGNAL INFO command)
$ ./firewire-request /dev/fw1 fcp 0x01ff1900ffffffff
response: 000: 0a ff 19 00 ff ff ff ff
Furthermore, AV/C EXTENDED STREAM FORMAT INFO is not implemented.
(AV/C EXTENDED STREAM FORMAT INFO list subfunction for input plug)
$ ./firewire-request /dev/fw1 fcp 0x01ffbfc000000000ffff00ff
response: 000: 08 ff bf c0 00 00 00 00 ff ff 00 ff
(AV/C EXTENDED STREAM FORMAT INFO list subfunction for output plug)
$ ./firewire-request /dev/fw1 fcp 0x01ffbfc001000000ffff00ff
response: 000: 08 ff bf c0 01 00 00 00 ff ff 00 ff
(AV/C EXTENDED STREAM FORMAT INFO single subfunction for input plug)
$ ./firewire-request /dev/fw1 fcp 0x01ffbfc100000000ffffffff
response: 000: 08 ff bf c1 00 00 00 00 ff ff ff ff
(AV/C EXTENDED STREAM FORMAT INFO single subfunction for output plug)
$ ./firewire-request /dev/fw1 fcp 0x01ffbfc101000000ffffffff
response: 000: 08 ff bf c1 01 00 00 00 ff ff ff ff
Reference: https://mailman.alsa-project.org/pipermail/alsa-devel/2012-May/052264.html
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200113073418.24622-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stanton SCS.1d doesn't support packet streaming even if it has plugs for
isochronous communication.
This commit is a preparation for this case. The 'has_input' member is
added to specific structure, and MIDI/PCM interfaces are not added when
the member is false.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200113073418.24622-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When AV/C command returns 'NOT IMPLEMENTED' status in its response, ALSA
oxfw driver uses ENOSYS as error code. However, it's expected just to be
used for missing system call number.
This commit replaces it with ENXIO.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200113073418.24622-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA firewire-tascam driver can bring corruption due to spin lock without
restoration of IRQ flag in SoftIRQ context. This commit fixes the bug.
Cc: Scott Bahling <sbahling@suse.com>
Cc: <stable@vger.kernel.org> # v4.21
Fixes: d716742243 ("ALSA: firewire-tascam: queue events for change of control surface")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200113085719.26788-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
All the PCM ioctl ops of ALSA FireWire drivers do nothing but calling
the default handler.
Now PCM core accepts NULL as the default ioctl ops(*), so let's drop
altogether.
(*) commit fc033cbf6f ("ALSA: pcm: Allow NULL ioctl ops")
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191210061145.24641-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Clean up the drivers with the new managed buffer allocation API.
The superfluous snd_pcm_lib_malloc_pages() and
snd_pcm_lib_free_pages() calls are dropped.
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191209192422.23902-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Mutex is doubly unlocked in some error path of pcm.open. This commit fixes
ALSA firewire-motu driver in Linux kernel v5.5.
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 3fd80b2003 ("ALSA: firewire-motu: use the same size of period for PCM substream in AMDTP streams")
Fixes: 0f5482e787 ("ALSA: firewire-motu: share PCM buffer size for both direction")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191208232226.6685-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent change (*) in the ALSA memalloc core allows us to drop the
special vmalloc-specific allocation and page handling. This patch
coverts to the common code.
(*) 1fe7f397cfe2: ALSA: memalloc: Add vmalloc buffer allocation
support
7e8edae39fd1: ALSA: pcm: Handle special page mapping in the
default mmap handler
Link: https://lore.kernel.org/r/20191105151856.10785-11-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For Focusrite Saffire Pro i/o, the lowest 8 bits of register represents
configured source of sampling clock. The next lowest 8 bits represents
whether the configured source is actually detected or not just after
the register is changed for the source.
Current implementation evaluates whole the register to detect configured
source. This results in failure due to the next lowest 8 bits when the
source is connected in advance.
This commit fixes the bug.
Fixes: 25784ec2d0 ("ALSA: bebob: Add support for Focusrite Saffire/SaffirePro series")
Cc: <stable@vger.kernel.org> # v3.16+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191102150920.20367-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Originally BeBeB ASICs and firmware supports clock mode to synchronizing
to syt field of received isoc packet. This mode is known as 'SYT Match'
slightly described in IEC 61883-6 (but no detail mechanisms). In this
mode, drivers can control sampling clock in device. Driver for Windows
and macOS uses this feature to perform synchronization for devices
on the same bus.
In this mode, a plug of Music subunit for synchronization is connected
to a plug of isoc unit for incoming packet streaming, then the order to
establish connections is INPUT_PLUG first, OUTPUT_PLUG second.
This commit implements the above.
Actually each device works with its own clock for sampling, therefore
the original design is hardly implemented to vendor's products.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191101131323.17300-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As long as I investigated, there's some cases about the delay for device
between establishing OUTPUT_PLUG and transmitting first isoc packet. For
devices which support BeBoB protocol version 1 can transmit the packet
within several hundred milliseconds, while for devices which support
BeBoB protocol version 3 can transmit the packet within 2 seconds.
Devices with protocol version 1:
* Edirol FA-66
* Yamaha GO46
* Terratec Phase x24 FW
* M-Audio FireWire AudioPhile
* M-Audio FireWire Solo
* M-Audio FireWire 1814
* M-Audio FireWire 410
* Focusrite Saffire Pro 26 I/O
Devices with protocol version 3:
* M-Audio Profire Lightbridge
* Behringer FCA610
* Phonic Firefly 202
At present ALSA bebob driver postpones starting IR context during
1.5 sec for all of supported devices. The delay is too long for
devices with protocol version 1, while it's not enough for devices with
protocol version 3.
This commit improves the delay for these protocols.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191101131323.17300-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As long as I investigated, some devices with BeBoB protocol version 1
can be freezed during several hundreds milliseconds after breaking
connections. When accessing during the freezed time, any transaction
is corrupted. In the worst case, the device is going to reboot.
I can see this issue in:
* Roland FA-66
* M-Audio FireWire Solo
This commit expands sleep just after breaking connections to avoid
the freezed time as much as possible. I note that the freeze/reboot
behaviour is similar to below models:
* Focusrite Saffire Pro 10 I/O
* Focusrite Saffire Pro 26 I/O
The above models certainly reboot after breaking connections.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191101131323.17300-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Just fix a typo of "S/PDIF" in the clock name string.
Fixes: 4638ec6ede ("ALSA: firewire-motu: add proc node to show current statuc of clock and packet formats")
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191030100921.3826-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In MOTU FireWire series, devices which support protocol version 2 have
several types of hardware design to process audio data frames for isoc
packet. Roughly devices are categorized into three groups:
- 828mkII
- Traveler/896HD
- UltraLite/8pre FireWire
Some bit flags in register addressed by 0x'ffff'f000'0b14
includes device-specific effects.
This commit cleanups implementation of protocol v2 in this point.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191030080644.1704-6-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit adds some helper functions to parse register value for
source of sampling clock and nominal sampling transmission frequency.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191030080644.1704-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In MOTU FireWire series, devices have a mode to generate sampling clock
from a sequence of source packet header (SPH) included in each data block
of received packet. This mode is used for several purposes such as mode
for SMPTE time code, sync to the other sound cards and so on.
This commit adds support for the SPH mode.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191030080644.1704-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When unknown source is detected for sampling clock, corresponding label
was not added for node on procfs.
This commit adds it.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191030080644.1704-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A helper function of ALSA bebob driver returns negative value in a
function which has a prototype to return unsigned value.
This commit fixes it by changing the prototype.
Fixes: eb7b3a056c ("ALSA: bebob: Add commands and connections/streams management")
Cc: <stable@vger.kernel.org> # v3.16+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191026030620.12077-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some devices have a quirk to postpone transmission of isoc packet for
several dozen or hundred isoc cycles since configured to transmit.
Furthermore, some devices have a quirk to transmit isoc packet with
discontinued data of its header.
In 1394 OHCI specification, software allows to start isoc context with
certain isoc cycle. Linux firewire subsystem has kernel API to use it
as well.
This commit uses the functionality of 1394 OHCI controller to handle
the quirks. At present, this feature is convenient to ALSA bebob and
fireface driver. As a result, some devices can be safely handled, as
long as I know:
- MAudio FireWire solo
- MAudio ProFire Lightbridge
- MAudio FireWire 410
- Roland FA-66
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191018061911.24909-7-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit changes AMDTP domain to run on an IT context of 1394 OHCI as
IRQ target. No hardware interrupt is scheduled for the other isoc
contexts. All of the isoc context are processed in a callback for an isoc
context of IRQ target.
The IRQ target is automatically selected from a list of AMDTP streams,
thus users of AMDTP domain should add an AMDTP stream for IT context
at least.
The reason to select IT context as IRQ target is that the IT context
runs on local 1394 OHCI controller and it can be used as reliable,
constant IRQ generator. On the other hand, IR context can include skip
cycle according to isoc packet transferred by device.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191018061911.24909-6-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The aim of AMDTP domain is to process several isoc context in the same
time. However, current implementation is against this idea because it
flushes each isoc context in the end of processing context callback.
This commit cancels it.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191018061911.24909-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
An isoc context for AMDTP stream is flushed to queue packet
by a call of pcm.ack. This commit extends this for AMDTP
domain.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191018061911.24909-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
An isoc context for AMDTP stream is flushed to queue packet
by a call of pcm.pointer. This commit extends this for AMDTP
domain.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191018061911.24909-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a preparation to handle several IR/IT contexts in the same
domain by tasklet context for one of the IT context. Such IT context is
stored to AMDTP domain structure as 'irq_target'.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191018061911.24909-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In IEC 61883-1/6, one isoc packet can transfer events up to the value of
syt interval. This comes from the interval of isoc cycle. As 1394 OHCI
controller can generate hardware IRQ per isoc packet, the interval is
calculated as 125 usec.
In IEC 61883-1/6, two ways of transmission is described; blocking and
non-blocking methods. In blocking method, the sequence of packet includes
'empty' or 'NODATA' packets which include no events. In non-blocking
method, the number of events per packet is variable up to the syt
interval.
This commit uses double of the value of syt interval as minimum available
size of PCM period due to the above protocol design.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191017155424.885-13-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Linux driver for 1394 OHCI controller voluntarily flushes isoc context
when total size of accumulated context header reached PAGE_SIZE. This
kicks tasklet for the isoc context. This is inconvenient to process
runtime of PCM substream.
This commit adds a restriction of the maximum size of PCM period to
avoid this behaviour.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191017155424.885-12-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA IEC 61883-1/6 packet streaming engine controls 1394 OHCI controller
to generate hardware IRQ for fixed number of isochronous packets (=16)
since its first commit.
This commit allow the engine to generate it for variable period according
to the number of event to handle. For outgoing stream, internal
calculator is used to check the accumulated events. For incoming stream,
the number of data block in the packet of stream is used to check the
accumulated events. When it's unavailable, fixed number of packet
roughly calculated in advance is used instead of event counting.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191017155424.885-11-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit allows ALSA fireface driver to share PCM buffer size for
both capture and playback PCM substream. When AMDTP domain starts for
one of the PCM substream, buffer size of the PCM substream is stores to
AMDTP domain structure. Some AMDTP streams have already run with the
buffer size when another PCM substream starts, therefore the PCM
substream has a constraint to its buffer size.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191017155424.885-10-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit allows ALSA firewire-motu driver to share PCM buffer
size for both capture and playback PCM substream. When AMDTP domain
starts for one of the PCM substream, buffer size of the PCM substream
is stores to AMDTP domain structure. Some AMDTP streams have already
run with the buffer size when another PCM substream starts, therefore
the PCM substream has a constraint to its buffer size.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191017155424.885-9-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit allows ALSA firewire-tascam driver to share PCM buffer
size for both capture and playback PCM substream. When AMDTP domain
starts for one of the PCM substream, buffer size of the PCM substream
is stores to AMDTP domain structure. Some AMDTP streams have already
run with the buffer size when another PCM substream starts, therefore
the PCM substream has a constraint to its buffer size.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191017155424.885-8-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit allows ALSA firewire-digi00x driver to share PCM buffer
size for both capture and playback PCM substream. When AMDTP domain
starts for one of the PCM substream, buffer size of the PCM substream
is stores to AMDTP domain structure. Some AMDTP streams have already
run with the buffer size when another PCM substream starts, therefore
the PCM substream has a constraint to its buffer size.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191017155424.885-7-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit allows ALSA dice driver to share PCM buffer size for both
capture and playback PCM substream. When AMDTP domain starts for one
of the PCM substream, buffer size of the PCM substream is stores to
AMDTP domain structure. Some AMDTP streams have already run with the
buffer size when another PCM substream starts, therefore the PCM
substream has a constraint to its buffer size.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191017155424.885-6-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit allows ALSA oxfw driver to share PCM buffer size for both
capture and playback PCM substream. When AMDTP domain starts for one
of the PCM substream, buffer size of the PCM substream is stores to
AMDTP domain structure. Some AMDTP streams have already run with the
buffer size when another PCM substream starts, therefore the PCM
substream has a constraint to its buffer size.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191017155424.885-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit allows ALSA fireworks driver to share PCM buffer size for
both capture and playback PCM substream. When AMDTP domain starts for
one of the PCM substream, buffer size of the PCM substream is stores
to AMDTP domain structure. Some AMDTP streams have already run with the
buffer size when another PCM substream starts, therefore the PCM
substream has a constraint to its buffer size.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191017155424.885-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit allows ALSA bebob driver to share PCM buffer size for both
capture and playback PCM substream. When AMDTP domain starts for one
of the PCM substream, buffer size of the PCM substream is stores to
AMDTP domain structure. Some AMDTP streams have already run with the
buffer size when another PCM substream starts, therefore the PCM
substream has a constraint to its buffer size.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191017155424.885-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The number of packets in packet buffer has been fixed number (=48) since
first commit of ALSA IEC 61883-1/6 packet streaming engine.
This commit allows the engine to use variable number of packets in the
buffer. The size is calculated by a parameter in AMDTP domain structure
surely to store the number of events in the packets of buffer. Although
the value of parameter is expected to come from 'period size' parameter
of PCM substream, at present 48 is still used.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191017155424.885-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In current implementation, when opening a PCM substream, it's needed to
check whether the opposite PCM substream runs. This is to assign
effectual constraints (e.g. sampling rate) to opened PCM substream.
The number of PCM substreams on AMDTP streams in domain is recorded in
own structure. Usage of this count is an alternative of the above check.
This is better because the count is incremented in pcm.hw_params earlier
than pcm.trigger.
This commit replaces the check with the substream count and the value for
the size of PCM period. Unlike the other drivers in ALSA firewire stack,
no MIDI substream is multiplexed into AMDTP stream.
I note that Fireface AMDTP protocol has a quirk that tx stream includes
blank isochronous cycle. The packet for blank cycle is equivalent to
empty or NODATA packet in IEC 61883-6, thus the protocol is similar to
blocking transmission method of IEC 61883-6. On the other hand, rx
stream adopts non-blocking transmission method. Although the difference
of transmission method between tx/rx streams precisely brings different
timing for a certain amount of events due to their different calculation
for data blocks per packet, it's possible to approximate enough amount
of events mostly has the same timing. Actually current ALSA IEC 61883-1/6
engine uses large amount of data blocks for each hardware IRQ
(=16 packets).
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191007110532.30270-18-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In current implementation, when opening a PCM substream, it's needed to
check whether the opposite PCM substream runs. This is to assign
effectual constraints (e.g. sampling rate) to opened PCM substream.
The number of PCM substreams and MIDI substreams on AMDTP streams in
domain is recorded in own structure. Usage of this count is an
alternative of the above check. This is better because the count is
incremented in pcm.hw_params earlier than pcm.trigger.
This idea has one issue because it's incremented for MIDI substreams as
well. In current implementation, for a case that any MIDI substream run
and a PCM substream is going to start, PCM application to start the PCM
substream can decide hardware parameters by restart packet streaming.
Just checking the substream count can brings regression.
Now AMDTP domain structure has a member for the size of PCM period in
PCM substream which starts AMDTP streams in domain. When the value has
zero and the substream count is greater than 1, it means that any MIDI
substream starts AMDTP streams in domain. Usage of the value can resolve
the above issue.
This commit replaces the check with the substream count and the value for
the size of PCM period.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191007110532.30270-17-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In current implementation, when opening a PCM substream, it's needed to
check whether the opposite PCM substream runs. This is to assign
effectual constraints (e.g. sampling rate) to opened PCM substream.
The number of PCM substreams on AMDTP streams in domain is recorded in
own structure. Usage of this count is an alternative of the above check.
This is better because the count is incremented in pcm.hw_params earlier
than pcm.trigger.
This commit replaces the check with the substream count and the value for
the size of PCM period. Unlike the other drivers in ALSA firewire stack,
no MIDI substream is multiplexed into AMDTP stream.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191007110532.30270-16-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In current implementation, when opening a PCM substream, it's needed to
check whether the opposite PCM substream runs. This is to assign
effectual constraints (e.g. sampling rate) to opened PCM substream.
The number of PCM substreams and MIDI substreams on AMDTP streams in
domain is recorded in own structure. Usage of this count is an
alternative of the above check. This is better because the count is
incremented in pcm.hw_params earlier than pcm.trigger.
This idea has one issue because it's incremented for MIDI substreams as
well. In current implementation, for a case that any MIDI substream run
and a PCM substream is going to start, PCM application to start the PCM
substream can decide hardware parameters by restart packet streaming.
Just checking the substream count can brings regression.
Now AMDTP domain structure has a member for the size of PCM period in
PCM substream which starts AMDTP streams in domain. When the value has
zero and the substream count is greater than 1, it means that any MIDI
substream starts AMDTP streams in domain. Usage of the value can resolve
the above issue.
This commit replaces the check with the substream count and the value for
the size of PCM period.
I note that DOT AMDTP protocol has a quirk to use different transmission
method of IEC 61883-6 for tx/rx streams; non-blocking in tx stream and
blocking in rx stream. Although the difference of transmission method
between tx/rx streams precisely brings different timing for a certain
amount of events due to their different calculation for data blocks per
packet, it's possible to approximate enough amount of events mostly has
the same timing. Actually current ALSA IEC 61883-1/6 engine uses large
amount of data blocks for each hardware IRQ (=16 packets).
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191007110532.30270-15-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In current implementation, when opening a PCM substream, it's needed to
check whether the opposite PCM substream runs. This is to assign
effectual constraints (e.g. sampling rate) to opened PCM substream.
The number of PCM substreams and MIDI substreams on AMDTP streams in
domain is recorded in own structure. Usage of this count is an
alternative of the above check. This is better because the count is
incremented in pcm.hw_params earlier than pcm.trigger.
This idea has one issue because it's incremented for MIDI substreams as
well. In current implementation, for a case that any MIDI substream run
and a PCM substream is going to start, PCM application to start the PCM
substream can decide hardware parameters by restart packet streaming.
Just checking the substream count can brings regression.
Now AMDTP domain structure has a member for the size of PCM period in
PCM substream which starts AMDTP streams in domain. When the value has
zero and the substream count is greater than 1, it means that any MIDI
substream starts AMDTP streams in domain. Usage of the value can resolve
the above issue.
This commit replaces the check with the substream count and the value for
the size of PCM period.
Dice hardware has a quirk called as 'Dual Wire'. For a case of higher
sampling transmission frequency, this commit performs calculations between
the number of PCM frames and the number of events in AMDTP stream.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191007110532.30270-14-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In current implementation, when opening a PCM substream, it's needed to
check whether the opposite PCM substream runs. This is to assign
effectual constraints (e.g. sampling rate) to opened PCM substream.
The number of PCM substreams and MIDI substreams on AMDTP streams in
domain is recorded in own structure. Usage of this count is an
alternative of the above check. This is better because the count is
incremented in pcm.hw_params earlier than pcm.trigger.
This idea has one issue because it's incremented for MIDI substreams as
well. In current implementation, for a case that any MIDI substream run
and a PCM substream is going to start, PCM application to start the PCM
substream can decide hardware parameters by restart packet streaming.
Just checking the substream count can brings regression.
Now AMDTP domain structure has a member for the size of PCM period in
PCM substream which starts AMDTP streams in domain. When the value has
zero and the substream count is greater than 1, it means that any MIDI
substream starts AMDTP streams in domain. Usage of the value can resolve
the above issue.
This commit replaces the check with the substream count and the value for
the size of PCM period.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191007110532.30270-13-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In current implementation, when opening a PCM substream, it's needed to
check whether the opposite PCM substream runs. This is to assign
effectual constraints (e.g. sampling rate) to opened PCM substream.
The number of PCM substreams and MIDI substreams on AMDTP streams in
domain is recorded in own structure. Usage of this count is an
alternative of the above check. This is better because the count is
incremented in pcm.hw_params earlier than pcm.trigger.
This idea has one issue because it's incremented for MIDI substreams as
well. In current implementation, for a case that any MIDI substream run
and a PCM substream is going to start, PCM application to start the PCM
substream can decide hardware parameters by restart packet streaming.
Just checking the substream count can brings regression.
Now AMDTP domain structure has a member for the size of PCM period in
PCM substream which starts AMDTP streams in domain. When the value has
zero and the substream count is greater than 1, it means that any MIDI
substream starts AMDTP streams in domain. Usage of the value can resolve
the above issue.
This commit replaces the check with the substream count and the value for
the size of PCM period.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191007110532.30270-12-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In current implementation, when opening a PCM substream, it's needed to
check whether the opposite PCM substream runs. This is to assign
effectual constraints (e.g. sampling rate) to opened PCM substream.
The number of PCM substreams and MIDI substreams on AMDTP streams in
domain is recorded in own structure. Usage of this count is an
alternative of the above check. This is better because the count is
incremented in pcm.hw_params earlier than pcm.trigger.
This idea has one issue because it's incremented for MIDI substreams as
well. In current implementation, for a case that any MIDI substream run
and a PCM substream is going to start, PCM application to start the PCM
substream can decide hardware parameters by restart packet streaming.
Just checking the substream count can brings regression.
Now AMDTP domain structure has a member for the size of PCM period in
PCM substream which starts AMDTP streams in domain. When the value has
zero and the substream count is greater than 1, it means that any MIDI
substream starts AMDTP streams in domain. Usage of the value can resolve
the above issue.
This commit replaces the check with the substream count and the value for
the size of PCM period.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191007110532.30270-11-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a preparation to share the size of PCM period between
PCM substreams on AMDTP streams in the same domain. At this time,
the size of PCM period in PCM substream which starts AMDTP streams in the
same domain is recorded.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191007110532.30270-10-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a preparation to share the size of PCM period between
PCM substreams on AMDTP streams in the same domain. At this time,
the size of PCM period in PCM substream which starts AMDTP streams in the
same domain is recorded.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191007110532.30270-9-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a preparation to share the size of PCM period between
PCM substreams on AMDTP streams in the same domain. At this time,
the size of PCM period in PCM substream which starts AMDTP streams in the
same domain is recorded.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191007110532.30270-8-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a preparation to share the size of PCM period between
PCM substreams on AMDTP streams in the same domain. At this time,
the size of PCM period in PCM substream which starts AMDTP streams in the
same domain is recorded.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191007110532.30270-7-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a preparation to share the size of PCM period between
PCM substreams on AMDTP streams in the same domain. At this time,
the size of PCM period in PCM substream which starts AMDTP streams in the
same domain is recorded.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191007110532.30270-6-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a preparation to share the size of PCM period between
PCM substreams on AMDTP streams in the same domain. At this time,
the size of PCM period in PCM substream which starts AMDTP streams in the
same domain is recorded.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191007110532.30270-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a preparation to share the size of PCM period between
PCM substreams on AMDTP streams in the same domain. At this time,
the size of PCM period in PCM substream which starts AMDTP streams in the
same domain is recorded.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191007110532.30270-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a preparation to share the size of PCM period between
PCM substreams on AMDTP streams in the same domain. At this time,
the size of PCM period in PCM substream which starts AMDTP streams in the
same domain is recorded.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191007110532.30270-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In IEC 61883-6, it's called as 'event' what has presentation time
represented by timestamp in CIP header. Although the ratio of the number
of event against the number of data block is different depending on
event data type represented by the specific field in CIP header, it's
just one in the most cases supported by ALSA IEC 61883-1/6 engine.
In 1394 OHCI specification, applications can schedule hardware IRQ
by configuring descriptor with IRQ flag for packet against each
isochronous cycle. For future commit, I use the hardware IRQ for
isoc IT context to acknowledge the elapse of PCM period for both
playback/capture directions on AMDTP streams in the same domain.
This commit is a preparation for the above idea. This commit adds
a member into AMDTP domain structure to record the number of PCM frames.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191007110532.30270-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20191004144931.3851-1-krzk@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At higher sampling rate (e.g. 192.0 kHz), Alesis iO26 transfers 4 data
channels per data block in CIP.
Both iO14 and iO26 have the same contents in their configuration ROM.
For this reason, ALSA Dice driver attempts to distinguish them according
to the value of TX0_AUDIO register at probe callback. Although the way is
valid at lower and middle sampling rate, it's lastly invalid at higher
sampling rate because because the two models returns the same value for
read transaction to the register.
In the most cases, users just plug-in the device and ALSA dice driver
detects it. In the case, the device runs at lower sampling rate and
the driver detects expectedly. For this reason, this commit leaves the
way to detect as is.
Fixes: 28b208f600 ("ALSA: dice: add parameters of stream formats for models produced by Alesis")
Cc: <stable@vger.kernel.org> # v4.18+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20190916101851.30409-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2 bytes in MSB of register for clock status is zero during intermediate
state after changing status of sampling clock in models of TASCAM FireWire
series. The duration of this state differs depending on cases. During the
state, it's better to retry reading the register for current status of
the clock.
In current implementation, the intermediate state is checked only when
getting current sampling transmission frequency, then retry reading.
This care is required for the other operations to read the register.
This commit moves the codes of check and retry into helper function
commonly used for operations to read the register.
Fixes: e453df44f0 ("ALSA: firewire-tascam: add PCM functionality")
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20190910135152.29800-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The return value of snd_tscm_stream_get_clock() is ignored. This commit
checks the value and handle error.
Fixes: e453df44f0 ("ALSA: firewire-tascam: add PCM functionality")
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20190910135152.29800-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Quite a big update this time around, particularly in the core
where we've had a lot of cleanups from Morimoto-san - there's
not much functional change but quite a bit of modernization
going on. We've also seen a lot of driver work, a lot of it
cleanups but also some particular drivers.
- Lots and lots of cleanups from Morimoto-san and Yue Haibing.
- Lots of cleanups and enhancements to the Freescale, sunxi dnd
Intel rivers.
- Initial Sound Open Firmware suppot for i.MX8.
- Removal of w90x900 and nuc900 drivers as the platforms are
being removed.
- New support for Cirrus Logic CS47L15 and CS47L92, Freescale
i.MX 7ULP and 8MQ, Meson G12A and NXP UDA1334
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl13cr4THGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0NKuB/9fvRIh6bJ4pUA26Bc7+shJQ1BtC/MN
jo1G4maN+hY5ZUwE5hvg04S6W6Unm1iNotQecKcF43Vh/4SZNiLtfSEM4b/6IBWw
IFUU6xDz8Q4HbF4HJMotpKQKMABpfds5flH2e1YrrNoMH+KlkC9kJOR26B2W36xW
TZclfquCDICxr8M7eYGM7N5hOqSrlugyWBZqTTnTDnsMrW4SAaH2HYwFhaeayd+I
ECyaXIoUHvo4FX5ueZv/mzBiMl0z4rgXn3tuqI6a8LoWJdRZTkcSQabtuIC+wmxb
P734RY6vjSUYZrv03cAtxHDrSVoC/RYedOzhT+iFF6y/NHzdu701lsJb
=aD0T
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v5.4
Quite a big update this time around, particularly in the core
where we've had a lot of cleanups from Morimoto-san - there's
not much functional change but quite a bit of modernization
going on. We've also seen a lot of driver work, a lot of it
cleanups but also some particular drivers.
- Lots and lots of cleanups from Morimoto-san and Yue Haibing.
- Lots of cleanups and enhancements to the Freescale, sunxi dnd
Intel rivers.
- Initial Sound Open Firmware suppot for i.MX8.
- Removal of w90x900 and nuc900 drivers as the platforms are
being removed.
- New support for Cirrus Logic CS47L15 and CS47L92, Freescale
i.MX 7ULP and 8MQ, Meson G12A and NXP UDA1334
The destructor of AMDTP domain has WARN_ON() for the list of associated
AMDTP stream. Although this reminds a case that developers forget to
program consumer drivers to stop AMDTP domain, it hits when AMDTP domain
is not initialized yet. This occurs when initialization of sound card
fails as well and it's superfluous.
This commit removes the WARN_ON. Although the API to AMDTP domain does
nothing, it's left for future usage.
Fixes: 3ec3d7a3ff ("ALSA: firewire-lib: add AMDTP domain structure to handle several isoc contexts")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20190906131414.15370-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
TASCAM FE-8 is the rest of model in TASCAM FireWire series. This device
has no functionality to process audio signal and MIDI messages. Instead,
it transfers control messages to host system corresponding to operations
for some faders, buttons and knobs on its surface.
Unlike the other devices in this series, the control messages are
transmitted by asynchronous transactions. Some registers of device are
used for registration of destination address for the transaction. The
transaction includes quadlet-aligned data up to 32 quadlets.
Userspace applications can receive the transaction and parse it for
control message via Linux FireWire subsystem, without any support by
ALSA firewire-tascam driver. Therefore the driver gives no support
for it.
This commit removes placeholder for FE-8 and add some comment for its
functionalities as notes.
$ python2 linux-firewire-utils/src/crpp < ~/git/am-config-rom/tascam/tascam-fe8.img
ROM header and bus information block
-----------------------------------------------------------------
400 040f4798 bus_info_length 4, crc_length 15, crc 18328 (should be 14256)
404 31333934 bus_name "1394"
408 20ff7002 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 255, max_rec 7 (256)
40c 00022eff company_id 00022e |
410 a094dcb7 device_id ffa094dcb7 | EUI-64 00022effa094dcb7
root directory
-----------------------------------------------------------------
414 0004bccc directory_length 4, crc 48332
418 0300022e vendor
41c 0c0083c0 node capabilities per IEEE 1394
420 8d000006 --> eui-64 leaf at 438
424 d1000001 --> unit directory at 428
unit directory at 428
-----------------------------------------------------------------
428 0003eda4 directory_length 3, crc 60836
42c 1200022e specifier id
430 13800001 version
434 d4000004 --> dependent info directory at 444
eui-64 leaf at 438
-----------------------------------------------------------------
438 0002461e leaf_length 2, crc 17950
43c 00022eff company_id 00022e |
440 a094dcb7 device_id ffa094dcb7 | EUI-64 00022effa094dcb7
dependent info directory at 444
-----------------------------------------------------------------
444 0002ae47 directory_length 2, crc 44615
448 81000002 --> descriptor leaf at 450
44c 82000006 --> bus dependent info leaf at 464
descriptor leaf at 450
-----------------------------------------------------------------
450 0004a79e leaf_length 4, crc 42910
454 00000000 textual descriptor
458 00000000 minimal ASCII
45c 54415343 "TASC"
460 414d0000 "AM"
bus dependent info leaf at 464
-----------------------------------------------------------------
464 0004a7d8 leaf_length 4, crc 42968
468 00000000
46c 00000000
470 46452d38
474 00000000
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20190906125544.13800-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
MOTU 4pre was launched in 2012 by MOTU, Inc. This commit allows userspace
applications can transmit and receive PCM frames and MIDI messages for
this model via ALSA PCM interface and RawMidi/Sequencer interfaces.
The device supports MOTU protocol version 3. Unlike the other devices, the
device is simply designed. The size of data block is fixed to 10 quadlets
during available sampling rates (44.1 - 96.0 kHz). Each data block
includes 1 source packet header, 2 data chunks for messages, 8 data chunks
for PCM samples and 2 data chunks for padding to quadlet alignment. The
device has no MIDI, optical, BNC and AES/EBU interfaces.
Like support for the other MOTU devices, the quality of playback sound
is not enough good with periodical noise yet.
$ python2 crpp < ~/git/am-config-rom/motu/motu-4pre.img
ROM header and bus information block
-----------------------------------------------------------------
400 041078cc bus_info_length 4, crc_length 16, crc 30924
404 31333934 bus_name "1394"
408 20ff7000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 255, max_rec 7 (256)
40c 0001f200 company_id 0001f2 |
410 000a41c5 device_id 00000a41c5 | EUI-64 0001f200000a41c5
root directory
-----------------------------------------------------------------
414 0004ef04 directory_length 4, crc 61188
418 030001f2 vendor
41c 0c0083c0 node capabilities per IEEE 1394
420 d1000002 --> unit directory at 428
424 8d000005 --> eui-64 leaf at 438
unit directory at 428
-----------------------------------------------------------------
428 0003ceda directory_length 3, crc 52954
42c 120001f2 specifier id
430 13000045 version
434 17103800 model
eui-64 leaf at 438
-----------------------------------------------------------------
438 0002d248 leaf_length 2, crc 53832
43c 0001f200 company_id 0001f2 |
440 000a41c5 device_id 00000a41c5 | EUI-64 0001f200000a41c5
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When introducing the list of packet descriptor, for rx packet, the
calculation of scheduled isoc cycle is omitted. This commit fixes the
bug.
Fixes: f4f6ae7b7c ("ALSA: firewire-lib: use packet descriptor for IT context")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When introducing AMDTP domain to ALSA dice driver, error path does not
handle error correctly. This commit fixes the bug.
Fixes: e9f21129b8 ("ALSA: dice: support AMDTP domain")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When userspace application calls ioctl(2) to configure hardware for PCM
playback substream, ALSA OXFW driver handles incoming AMDTP stream.
In this case, outgoing AMDTP stream should be handled.
This commit fixes the bug for v5.3-rc kernel.
Fixes: 4f380d0070 ("ALSA: oxfw: configure packet format in pcm.hw_params callback")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA oxfw driver supports Griffin FireWave. This device supports one
isochronous stream for PCM playback. Current driver executes code to
wait event for stream structure of opposite direction. This causes
NULL pointer dereference.
This commit fixes the bug.
Fixes: ac5d77864c ("ALSA: oxfw: support AMDTP domain")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pull USB validation patches. It's based on the latest 5.3 development
branch, so we shall catch up the whole things.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In iso_packets_buffer_init(), 'b->packets' is allocated through
kmalloc_array(). Then, the aligned packet size is checked. If it is
larger than PAGE_SIZE, -EINVAL will be returned to indicate the error.
However, the allocated 'b->packets' is not deallocated on this path,
leading to a memory leak.
To fix the above issue, free 'b->packets' before returning the error code.
Fixes: 31ef9134eb ("ALSA: add LaCie FireWire Speakers/Griffin FireWave Surround driver")
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cc: <stable@vger.kernel.org> # v2.6.39+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Sakamoto
Takashi Iwai
Dan Carpenter
Geert Uytterhoeven
Joe Perches
Kaixu Xia
Julia Lawall
Allen Pais
Pierre-Louis Bossart
Gustavo A. R. Silva
Jules Irenge
Krzysztof Kozlowski
Wenwen Wang