Граф коммитов

301 Коммитов

Автор SHA1 Сообщение Дата
Bryan Schumaker 89d77c8fa8 NFS: Convert v4 into a module
This patch exports symbols needed by the v4 module.  In addition, I also
switch over to using IS_ENABLED() to check if CONFIG_NFS_V4 or
CONFIG_NFS_V4_MODULE are set.

The module (nfs4.ko) will be created in the same directory as nfs.ko and
will be automatically loaded the first time you try to mount over NFS v4.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-30 19:06:52 -04:00
Bryan Schumaker 1c606fb74c NFS: Convert v3 into a module
This patch exports symbols and moves over the final structures needed by
the v3 module.  In addition, I also switch over to using IS_ENABLED() to
check if CONFIG_NFS_V3 or CONFIG_NFS_V3_MODULE are set.

The module (nfs3.ko) will be created in the same directory as nfs.ko and
will be automatically loaded the first time you try to mount over NFS v3.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-30 19:06:46 -04:00
Bryan Schumaker ddda8e0aa8 NFS: Convert v2 into a module
The module (nfs2.ko) will be created in the same directory as nfs.ko and
will be automatically loaded the first time you try to mount over NFS v2.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-30 19:06:41 -04:00
Bryan Schumaker fac1e8e4ef NFS: Keep module parameters in the generic NFS client
Otherwise we break backwards compatibility when v4 becomes a modules.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-30 19:06:31 -04:00
Bryan Schumaker 6a74490dca NFS: Pass super operations and xattr handlers in the nfs_subversion
I can set all variables in the nfs_fill_super() function, allowing me to
remove the nfs4_fill_super() function.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-30 19:06:05 -04:00
Bryan Schumaker 1179acc6a3 NFS: Only initialize the ACL client in the v3 case
v2 and v4 don't use it, so I create two new nfs_rpc_ops functions to
initialize the ACL client only when we are using v3.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-30 19:05:54 -04:00
Bryan Schumaker ff9099f266 NFS: Create a try_mount rpc op
I'm already looking up the nfs subversion in nfs_fs_mount(), so I have
easy access to rpc_ops that used to be difficult to reach.  This allows
me to set up a different mount path for NFS v2/3 and NFS v4.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-30 19:04:53 -04:00
Bryan Schumaker e8f25e6d6d NFS: Remove the NFS v4 xdev mount function
I can now share this code with the v2 and v3 code by using the NFS
subversion structure.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-30 19:04:45 -04:00
Bryan Schumaker ab7017a3a0 NFS: Add version registering framework
This patch adds in the code to track multiple versions of the NFS
protocol.  I created default structures for v2, v3 and v4 so that each
version can continue to work while I convert them into kernel modules.
I also removed the const parameter from the rpc_version array so that I
can change it at runtime.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-30 19:04:17 -04:00
Bryan Schumaker fbdefd6442 NFS: Split out the NFS v4 filesystem types
This allows me to move the v4 mounting and unmounting functions out of
the generic client and into a file that is only compiled when CONFIG_NFS_V4
is enabled.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-17 13:33:55 -04:00
Bryan Schumaker 3cadf4b864 NFS: Create a single nfs_clone_super() function
v2 and v3 shared a function for this, but v4 implemented something only
slightly different.  Might as well share code whenever possible...

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-17 13:33:54 -04:00
Trond Myklebust 8626e4a426 Merge commit '9249e17fe094d853d1ef7475dd559a2cc7e23d42' into nfs-for-3.6
Resolve conflicts with the VFS atomic open and sget changes.

Conflicts:
	fs/nfs/nfs4proc.c
2012-07-16 12:01:42 -04:00
David Howells 9249e17fe0 VFS: Pass mount flags to sget()
Pass mount flags to sget() so that it can use them in initialising a new
superblock before the set function is called.  They could also be passed to the
compare function.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-14 16:38:34 +04:00
Trond Myklebust f1daf666dd NFSv4: Fix an NFSv4 mount regression
The helper nfs_fs_mount() will always call nfs4_try_mount with the
mount_info->fill_super argument pointing to nfs_fill_super, which is
NFSv2/v3 only.
Fix is to have nfs4_try_mount replace it with nfs4_fill_super.

The regression was introduced by commit c40f8d1d (NFS: Create a common
fs_mount() function)

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-10 13:25:39 -04:00
Bryan Schumaker a8d8f02cf0 NFS: Create custom NFS v4 write_inode() function
This gives pnfs a chance to do a layout commit inside the v4 code.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-06-29 11:46:47 -04:00
Bryan Schumaker eeebf91675 NFS: Use nfs4_destroy_server() to clean up NFS v4
I can use this function to return delegations and unset the pnfs layout
driver rather than continuing to do these things in the generic client.
With this change, we no longer need an nfs4_kill_super().

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-06-29 11:46:44 -04:00
Bryan Schumaker c5afc8da5b NFS: Use the NFS_DEFAULT_VERSION for v2 and v3 mounts
Older versions of nfs utils don't always pass a "vers=" mount option for
NFS.  This chould lead to attempts at using NFS v0 due to a zeroed out
nfs_parsed_mount_data struct.  I solve this by setting the default NFS
version to NFS_DEFAULT_VERSION in the v2 and v3 cases (v4 has already been
taken care of by a similar patch).

Reported-by: Joerg Roedel <joro@&bytes.org>
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-06-09 14:38:59 -04:00
Bryan Schumaker cdf66442fa NFS4: Set parsed mount data version to 4
This patch only affects mounting through "-t nfs4" since it doesn't set
up an nfs version to use in the mount data.  The nfs client was trying
to mount using NFS v0, causing either a BUG() or a protocol not
supported message.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-06-05 15:50:47 -04:00
Chuck Lever 591555465e NFS: Use proper naming conventions for nfs_client.impl_id field
Clean up:  When naming fields and data types, follow established
conventions to facilitate accurate grep/cscope searches.

Additionally, for consistency, move the impl_id field into the NFSv4-
specific part of the nfs_client, and free that memory in the logic
that shuts down NFSv4 nfs_clients.

Introduced by commit 7d2ed9ac "NFSv4: parse and display server
implementation ids," Fri Feb 17, 2012.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-22 16:45:43 -04:00
Trond Myklebust 39ffb9218e NFS: Fix a compile issue when CONFIG_NFS_FSCACHE was undefined
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-16 10:24:20 -07:00
Bryan Schumaker 87c7083dc3 NFS: Pass mntfh as part of the nfs_mount_info structure
This allows me to use the filehandle allocated in nfs_fs_mount() for nfs
v4 mounts instead of allocating a new one.  Rather than change
nfs4_mount() to look almost exactly like nfs_fs_mount(), I instead
remove the function.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-14 17:30:31 -07:00
Bryan Schumaker 46058d46d3 NFS: Allocate parsed mount data directly to the nfs_mount_info structure
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-14 17:30:31 -07:00
Bryan Schumaker d72c727cd9 NFS: Create a single nfs_validate_mount_data() function
This new function chooses between the v2/3 parser and the v4 parser by
filesystem type.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-14 17:30:30 -07:00
Bryan Schumaker b72e4f42a3 NFS: Create a single function for text mount data
The v2/3 and v4 cases were very similar, with just a few parameters
changed.  This makes it easy to share code.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-14 17:30:30 -07:00
Bryan Schumaker 486aa699ff NFS: Create a new nfs_try_mount()
This function returns the same same return type as nfs4_try_mount() so
they two can be more easily substituted.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-14 17:30:29 -07:00
Bryan Schumaker db83335191 NFS: Let mount data parsing set the NFS version
This field is unconditionally set while parsing mount data, so there is
no need to fill it in here.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-14 17:30:29 -07:00
Bryan Schumaker 21e4b82e13 NFS: Use nfs_fs_mount_common() for remote referral mounts
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-14 17:30:28 -07:00
Bryan Schumaker 3d176e3fe4 NFS: Use nfs_fs_mount_common() for xdev mounts
At this point, there are only a few small differences between these two
functions.  I can set a few function pointers in the nfs_mount_info
struct to get around these differences.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-14 17:30:28 -07:00
Bryan Schumaker 8c958e0c4c NFS: Create a common xdev_mount() function
The only difference between nfs_xdev_mount() and nfs4_xdev_mount() is the
clone_super() function called to clone the super block.  I can combine
these two functions by using the fill_super field in the mount_info
structure.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-14 17:30:28 -07:00
Bryan Schumaker c40f8d1d35 NFS: Create a common fs_mount() function
The nfs4_remote_mount() function was only slightly different from the
nfs_fs_mount() function used by the generic client.  I created a new
nfs_mount_info structure to set different parameters to help combine
these functions.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-14 17:30:27 -07:00
Bryan Schumaker 586f95cd4f NFS: Remove NFS4_MOUNT_UNSHARED
This flag is numerically equivalent to NFS_MOUNT_UNSHARED, so I can
remove it to make collapsing functions more straightforward.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-14 17:30:27 -07:00
Bryan Schumaker 2311b9439c NFS: Don't pass mount data to nfs_fscache_get_super_cookie()
I intend on creating a single nfs_fs_mount() function used by all our
mount paths.  To avoid checking between new mounts and clone mounts, I
instead pass both structures to a new function in super.c that finds the
cache key and then looks up the super cookie.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-14 17:30:26 -07:00
Bryan Schumaker bae36241be NFS: Create a single nfs_get_root()
This patch splits out the NFS v4 specific functionality of
nfs4_get_root() into its own rpc_op called by the generic client, and
leaves nfs4_proc_get_rootfh() as its own stand alone function.  This
also allows me to change nfs4_remote_mount(), nfs4_xdev_mount() and
nfs4_remote_referral_mount() to use the generic client's nfs_get_root()
function.  Later patches in this series will collapse these functions
into one common function, so using the same get_root() function
everywhere simplifies future changes.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-14 17:30:26 -07:00
Bryan Schumaker 7e6eb683d2 NFS: Honor the authflavor set in the clone mount data
The authflavor is set in an nfs_clone_mount structure and passed to the
xdev_mount() functions where it was promptly ignored.  Instead, use it
to initialize an rpc_clnt for the cloned server.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-04-27 14:10:03 -04:00
Jan Kara 98a2139f4f nfs: Enclose hostname in brackets when needed in nfs_do_root_mount
When hostname contains colon (e.g. when it is an IPv6 address) it needs
to be enclosed in brackets to make parsing of NFS device string possible.
Fix nfs_do_root_mount() to enclose hostname properly when needed. NFS code
actually does not need this as it does not parse the string passed by
nfs_do_root_mount() but the device string is exposed to userspace in
/proc/mounts.

CC: Josh Boyer <jwboyer@redhat.com>
CC: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-04-20 17:59:01 -04:00
Linus Torvalds 0195c00244 Disintegrate and delete asm/system.h
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAT3NKzROxKuMESys7AQKElw/+JyDxJSlj+g+nymkx8IVVuU8CsEwNLgRk
 8KEnRfLhGtkXFLSJYWO6jzGo16F8Uqli1PdMFte/wagSv0285/HZaKlkkBVHdJ/m
 u40oSjgT013bBh6MQ0Oaf8pFezFUiQB5zPOA9QGaLVGDLXCmgqUgd7exaD5wRIwB
 ZmyItjZeAVnDfk1R+ZiNYytHAi8A5wSB+eFDCIQYgyulA1Igd1UnRtx+dRKbvc/m
 rWQ6KWbZHIdvP1ksd8wHHkrlUD2pEeJ8glJLsZUhMm/5oMf/8RmOCvmo8rvE/qwl
 eDQ1h4cGYlfjobxXZMHqAN9m7Jg2bI946HZjdb7/7oCeO6VW3FwPZ/Ic75p+wp45
 HXJTItufERYk6QxShiOKvA+QexnYwY0IT5oRP4DrhdVB/X9cl2MoaZHC+RbYLQy+
 /5VNZKi38iK4F9AbFamS7kd0i5QszA/ZzEzKZ6VMuOp3W/fagpn4ZJT1LIA3m4A9
 Q0cj24mqeyCfjysu0TMbPtaN+Yjeu1o1OFRvM8XffbZsp5bNzuTDEvviJ2NXw4vK
 4qUHulhYSEWcu9YgAZXvEWDEM78FXCkg2v/CrZXH5tyc95kUkMPcgG+QZBB5wElR
 FaOKpiC/BuNIGEf02IZQ4nfDxE90QwnDeoYeV+FvNj9UEOopJ5z5bMPoTHxm4cCD
 NypQthI85pc=
 =G9mT
 -----END PGP SIGNATURE-----

Merge tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system

Pull "Disintegrate and delete asm/system.h" from David Howells:
 "Here are a bunch of patches to disintegrate asm/system.h into a set of
  separate bits to relieve the problem of circular inclusion
  dependencies.

  I've built all the working defconfigs from all the arches that I can
  and made sure that they don't break.

  The reason for these patches is that I recently encountered a circular
  dependency problem that came about when I produced some patches to
  optimise get_order() by rewriting it to use ilog2().

  This uses bitops - and on the SH arch asm/bitops.h drags in
  asm-generic/get_order.h by a circuituous route involving asm/system.h.

  The main difficulty seems to be asm/system.h.  It holds a number of
  low level bits with no/few dependencies that are commonly used (eg.
  memory barriers) and a number of bits with more dependencies that
  aren't used in many places (eg.  switch_to()).

  These patches break asm/system.h up into the following core pieces:

    (1) asm/barrier.h

        Move memory barriers here.  This already done for MIPS and Alpha.

    (2) asm/switch_to.h

        Move switch_to() and related stuff here.

    (3) asm/exec.h

        Move arch_align_stack() here.  Other process execution related bits
        could perhaps go here from asm/processor.h.

    (4) asm/cmpxchg.h

        Move xchg() and cmpxchg() here as they're full word atomic ops and
        frequently used by atomic_xchg() and atomic_cmpxchg().

    (5) asm/bug.h

        Move die() and related bits.

    (6) asm/auxvec.h

        Move AT_VECTOR_SIZE_ARCH here.

  Other arch headers are created as needed on a per-arch basis."

Fixed up some conflicts from other header file cleanups and moving code
around that has happened in the meantime, so David's testing is somewhat
weakened by that.  We'll find out anything that got broken and fix it..

* tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system: (38 commits)
  Delete all instances of asm/system.h
  Remove all #inclusions of asm/system.h
  Add #includes needed to permit the removal of asm/system.h
  Move all declarations of free_initmem() to linux/mm.h
  Disintegrate asm/system.h for OpenRISC
  Split arch_align_stack() out from asm-generic/system.h
  Split the switch_to() wrapper out of asm-generic/system.h
  Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h
  Create asm-generic/barrier.h
  Make asm-generic/cmpxchg.h #include asm-generic/cmpxchg-local.h
  Disintegrate asm/system.h for Xtensa
  Disintegrate asm/system.h for Unicore32 [based on ver #3, changed by gxt]
  Disintegrate asm/system.h for Tile
  Disintegrate asm/system.h for Sparc
  Disintegrate asm/system.h for SH
  Disintegrate asm/system.h for Score
  Disintegrate asm/system.h for S390
  Disintegrate asm/system.h for PowerPC
  Disintegrate asm/system.h for PA-RISC
  Disintegrate asm/system.h for MN10300
  ...
2012-03-28 15:58:21 -07:00
David Howells 9ffc93f203 Remove all #inclusions of asm/system.h
Remove all #inclusions of asm/system.h preparatory to splitting and killing
it.  Performed with the following command:

perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *`

Signed-off-by: David Howells <dhowells@redhat.com>
2012-03-28 18:30:03 +01:00
Vivek Trivedi 5a7c9eec9f NFS: fix sb->s_id in nfs debug prints
NFS bdi flush thread in ps output is printed like "flush-<major number
in decimal>:<minor number in decimal>"
For example:
$ ps aux | grep flush
 2079 root         0 SW   [flush-0:18]
                                 ^^^^

nfs_bdi_register()
==> bdi_register_dev()
==> bdi_register(bdi, NULL, "%u:%u", MAJOR(dev), MINOR(dev));
                             ^^^^^

However, NFS sb->s_id store major:minor number in hex:

nfs_initialise_sb()
==>         snprintf(sb->s_id, sizeof(sb->s_id),
                 "%x:%x", MAJOR(sb->s_dev), MINOR(sb->s_dev));
                  ^^^^^

If we enable nfs debug prints using command:
$ rpcdebug -m nfs -s all

write to a file:
$ dd if=/dev/zero of=<NFS Mount>/testfile.txt bs=32768 count=1

Without Patch:
[ 2431.032000] NFS:     0 initiated write call (req 0:12/40, 32768 bytes
@ offset 0)                                         ^^^^

With Patch:
[ 2431.032000] NFS:     0 initiated write call (req 0:18/40, 32768 bytes
@ offset 0)                                         ^^^^

We should store NFS "s->s_id" in decimal to avoid confusion between NFS
flush thread name(in ps output) and NFS debug prints.

Signed-off-by: Vivek Trivedi <vtrivedi018@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@gmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-03-21 11:45:28 -04:00
Trond Myklebust 7e03b7cc07 NFS: Fix a compile issue when !CONFIG_NFS_V4_1
The attempt to display the implementation ID needs to be conditional on
whether or not CONFIG_NFS_V4_1 is defined

Reported-by: Bryan Schumaker <Bryan.Schumaker@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-03-05 15:27:01 -05:00
Chuck Lever 31b8e2aec0 NFS: Make clientaddr= optional
For NFSv4 mounts, the clientaddr= mount option has always been
required.  Now we have rpc_localaddr() in the kernel, which was
modeled after the same logic in the mount.nfs command that constructs
the clientaddr= mount option.  If user space doesn't provide a
clientaddr= mount option, the kernel can now construct its own.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-03-02 17:18:04 -05:00
Trond Myklebust 2446ab6070 SUNRPC: Use RCU to dereference the rpc_clnt.cl_xprt field
A migration event will replace the rpc_xprt used by an rpc_clnt.  To
ensure this can be done safely, all references to cl_xprt must now use
a form of rcu_dereference().

Special care is taken with rpc_peeraddr2str(), which returns a pointer
to memory whose lifetime is the same as the rpc_xprt.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
[ cel: fix lockdep splats and layering violations ]
[ cel: forward ported to 3.4 ]
[ cel: remove rpc_max_reqs(), add rpc_net_ns() ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-03-02 15:36:38 -05:00
Trond Myklebust 3862279a5f NFS: Consolidate the parsing of the '-ov4.x' and '-overs=4.x' mount options
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-03-02 14:06:39 -05:00
Trond Myklebust 7bbceb6f2b NFS: Ensure we display the minor version correctly in /proc/mounts etc.
The 'minorversion' mount option is now deprecated, so we need to display
the minor version number in the 'vers=' format.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-03-02 14:00:20 -05:00
Trond Myklebust 0d71b05809 NFS: Extend the -overs= mount option to allow 4.x minorversions
Allow the user to mount an NFSv4.0 or NFSv4.1 partition using a
standard syntax of '-overs=4.0', or '-overs=4.1' rather than the
more cumbersome '-overs=4,minorversion=1'.

See also the earlier patch by Dros Adamson, which added the
Linux-specific syntax '-ov4.0', '-ov4.1'.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-03-02 13:59:49 -05:00
Weston Andros Adamson 7d2ed9ac22 NFSv4: parse and display server implementation ids
Shows the implementation ids in /proc/self/mountstats.  This doesn't break
the nfs-utils mountstats tool.

Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-03-01 17:10:22 -05:00
Trond Myklebust 9937347a1e NFS: Ensure that the nfs_client 'net' field is always set
Currently, the nfs_parsed_mount_data->net field is initialised in
the nfs_parse_mount_options() function, which means that it only
gets set if we're using text based mounts. The legacy binary
mount interface is therefore broken.

Fix is to initialise the ->net field in nfs_alloc_parsed_mount_data.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Stanislav Kinsbursky <skinsbursky@parallels.com>
2012-02-19 08:44:07 +01:00
Weston Andros Adamson 571b755401 NFS: dont allow minorversion= opt when vers != 4
Don't allow invalid 'vers' and 'minorversion' combinations in mount options,
such as "vers=3,minorversion=1".

Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-02-15 00:19:52 -05:00
Weston Andros Adamson 7ced286e0a NFS: add mount options 'v4.0' and 'v4.1'
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-02-15 00:19:50 -05:00
Stanislav Kinsbursky b48e127884 NFS: pass current net to rpc_pton() while parsing mount options
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-02-06 18:48:04 -05:00
Jeff Layton c15c928f36 nfs: remove unneeded NULL pointer check in nfs4_remote_mount
"data" is never NULL here.

Reported-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-01-31 19:28:23 -05:00