If uart_flush_buffer() is called between atmel_tx_dma() and
atmel_complete_tx_dma(), the circular buffer has been cleared, but not
atmel_port->tx_len.
That leads to a circular buffer overflow (dumping (UART_XMIT_SIZE -
atmel_port->tx_len) bytes).
Tested-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Cc: stable <stable@vger.kernel.org> # 3.12+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The reference manual for the i.MX28 recommends to calculate the divisor
as
divisor = (UARTCLK * 32) / baud rate, rounded to the nearest integer
, so let's do this. For a typical setup of UARTCLK = 24 MHz and baud
rate = 115200 this changes the divisor from 6666 to 6667 and so the
actual baud rate improves from 115211.521 Bd (error ≅ 0.01 %) to
115194.240 Bd (error ≅ 0.005 %).
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently we fail in the following case:
$ unset HOME
$ ./perf record ls
$ echo $?
255
It's because the config code init fails due to a missing HOME variable
value. Fix this by skipping the user config init if there's no HOME
variable value.
Reported-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170330144637.7468-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We will need it to build tools/perf/trace/beauty/statx.h.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-nin41ve2fa63lrfbdr6x57yr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 4cfffcfa51 ("irqchip/mips-gic: Fix local interrupts") added
mapping of several local interrupts during initialisation of the gic
driver. This associates virq numbers with these interrupts.
Unfortunately, as not all of the interrupts are mapped in hardware
order, when drivers subsequently request these interrupts they conflict
with the mappings that have already been set up. For example, this
manifests itself in the gic clocksource driver, which fails to probe
with the message:
clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0x7350c9738,
max_idle_ns: 440795203769 ns
GIC timer IRQ 25 setup failed: -22
This is because virq 25 (the correct IRQ number specified via device
tree) was allocated to the PERFCTR interrupt (and 24 to the timer, 26 to
the FDC). To fix this, map all of these local interrupts in the hardware
order so as to associate their virq numbers with the correct hw
interrupts.
Fixes: 4cfffcfa51 ("irqchip/mips-gic: Fix local interrupts")
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
On this Dell AIO machine, the lineout jack does not work.
We found the pin 0x1a is assigned to lineout on this machine, and in
the past, we applied ALC298_FIXUP_DELL1_MIC_NO_PRESENCE to fix the
heaset-set mic problem for this machine, this fixup will redefine
the pin 0x1a to headphone-mic, as a result the lineout doesn't
work anymore.
After consulting with Dell, they told us this machine doesn't support
microphone via headset jack, so we add a new fixup which only defines
the pin 0x18 as the headset-mic.
[rearranged the fixup insertion position by tiwai in order to make the
merge with other branches easier -- tiwai]
Fixes: 59ec4b57bc ("ALSA: hda - Fix headset mic detection problem for two dell machines")
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Sparse complains about missing forward declarations:
arch/x86/boot/compressed/error.c:8:6:
warning: symbol 'warn' was not declared. Should it be static?
arch/x86/boot/compressed/error.c:15:6:
warning: symbol 'error' was not declared. Should it be static?
Include the missing header file.
Signed-off-by: Zhengyi Shen <shenzhengyi@gmail.com>
Acked-by: Kess Cook <keescook@chromium.org>
Link: http://lkml.kernel.org/r/1490770820-24472-1-git-send-email-shenzhengyi@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
MCA bank 3 is reserved on systems pre-Fam17h, so it didn't have a name.
However, MCA bank 3 is defined on Fam17h systems and can be accessed
using legacy MSRs. Without a name we get a stack trace on Fam17h systems
when trying to register sysfs files for bank 3 on kernels that don't
recognize Scalable MCA.
Call MCA bank 3 "decode_unit" since this is what it represents on
Fam17h. This will allow kernels without SMCA support to see this bank on
Fam17h+ and prevent the stack trace. This will not affect older systems
since this bank is reserved on them, i.e. it'll be ignored.
Tested on AMD Fam15h and Fam17h systems.
WARNING: CPU: 26 PID: 1 at lib/kobject.c:210 kobject_add_internal
kobject: (ffff88085bb256c0): attempted to be registered with empty name!
...
Call Trace:
kobject_add_internal
kobject_add
kobject_create_and_add
threshold_create_device
threshold_init_device
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1490102285-3659-1-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Just one vc4 fix from Eric, cc: stable
* tag 'drm-misc-fixes-2017-03-31' of git://anongit.freedesktop.org/git/drm-misc:
drm/vc4: Allocate the right amount of space for boot-time CRTC state.
drm/i915 fixes for v4.11-rc5
* tag 'drm-intel-fixes-2017-03-29' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: Restore marking context objects as dirty on pinning
drm/i915/gvt: Use force single submit flag to distinguish gvt request from i915 request
drm/i915/gvt: set shadow entry to scratch page while p2m failed
drm/i915/gvt: Fix guest fail to read EDID leading to black guest console issue.
drm/i915/gvt: fix wrong offset when loading RCS mocs
drm/i915/gvt: add write handler for mmio mbctl
drm/i915/kvmgt: Hold struct kvm reference
One small fix for radeon.
* 'drm-fixes-4.11' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: Override fpfn for all VRAM placements in radeon_evict_flags
a single fix to keep fence seqnos of completed jobs monotonically
increasing, as expected in various locations of the driver code. Also
tagged for stable.
* 'etnaviv/fixes' of https://git.pengutronix.de/git/lst/linux:
drm/etnaviv: (re-)protect fence allocation with GPU mutex
| CC lib/nmi_backtrace.o
| In file included from ../include/linux/kprobes.h:43:0,
| from ../lib/nmi_backtrace.c:17:
| ../arch/arc/include/asm/kprobes.h:57:13: warning: 'trap_is_kprobe' defined but not used [-Wunused-function]
| static void trap_is_kprobe(unsigned long address, struct pt_regs *regs)
| ^~~~~~~~~~~~~~
The warning started with 7d134b2ce6 ("kprobes: move kprobe declarations
to asm-generic/kprobes.h") which started including <asm/kprobes.h>
unconditionally into <linux/kprobes.h> exposing a stub function for
!CONFIG_KPROBES to rest of world. Fix that by making the stub a macro
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
As reported in STAR 9001165532, an SLC control reg read (for checking
busy state) right after SLC invalidate command may incorrectly return
NOT busy causing software to NOT spin-wait while operation is underway.
(and for some reason this only happens if L1 cache is also disabled - as
required by IOC programming model)
Suggested workaround is to do an additional Control Reg read, which
ensures the 2nd read gets the right status.
Cc: stable@vger.kernel.org #4.10
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
[vgupta: reworte changelog a bit]
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Use cpu_to_le32() for link_config variable in set_logical_link_config
command as this variable is of type u32.
Signed-off-by: Suresh Reddy <suresh.reddy@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a missing space in the JSON description after the uncore unit
Before:
perf list
...
unc_arb_coh_trk_requests.all
[Unit: uncore_arbNumber of entries allocated. Account for Any type: e.g. Snoop, Core aperture, etc]
...
After:
unc_arb_coh_trk_requests.all
[Unit: uncore_arb Number of entries allocated. Account for Any type: e.g. Snoop, Core aperture, etc]
Cc: jolsa@kernel.org
Link: http://lkml.kernel.org/n/tip-p989c7x9kaiy2bnkmgpo6cvt@git.kernel.org
Signed-off-by: Andi Kleen <ak@linux.intel.com>
An earlier update removed the UNC_M_CLOCKTICKS event for Broadwell DE.
But Metric events were still referring to it.
This adds it back under a different name from the event list,
and also fixes up the Metric events to use the new name.
Cc: jolsa@kernel.org
Link: http://lkml.kernel.org/n/tip-zxxzg4g5nr93o7np00vgqqwm@git.kernel.org
Signed-off-by: Andi Kleen <ak@linux.intel.com>
When __pa is applied to virtual address in uncached KSEG region the
result is incorrect. Fix it by checking if the original address is in
the uncached KSEG and adjusting the result. It looks better than masking
off bits because pfn_valid would correctly work with new __pa results
and it may be made working in noMMU case, once we get definition for
uncached memory view.
This is required for the dma_common_mmap and DMA debug code to work
correctly: they both indirectly use __pa with coherent DMA addresses.
In case of DMA debug the visible effect is false reports that an address
mapped for DMA is accessed by CPU.
Cc: stable@vger.kernel.org
Tested-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
The controller has different timings for MMC_TIMING_UHS_DDR50 and
MMC_TIMING_MMC_DDR52. Configuring the controller with SDHCI_CTRL_UHS_DDR50,
when MMC_TIMING_MMC_DDR52 timings are requested, is not correct and can
lead to unexpected behavior.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Fixes: bb5f8ea4d5 ("mmc: sdhci-of-at91: introduce driver for the Atmel SDMMC")
Cc: <stable@vger.kernel.org> # 4.4+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
SDIO cards may need clock to send the card interrupt to the host.
On a cherrytrail tablet with a RTL8723BS wifi chip, without this patch
pinging the tablet results in:
PING 192.168.1.14 (192.168.1.14) 56(84) bytes of data.
64 bytes from 192.168.1.14: icmp_seq=1 ttl=64 time=78.6 ms
64 bytes from 192.168.1.14: icmp_seq=2 ttl=64 time=1760 ms
64 bytes from 192.168.1.14: icmp_seq=3 ttl=64 time=753 ms
64 bytes from 192.168.1.14: icmp_seq=4 ttl=64 time=3.88 ms
64 bytes from 192.168.1.14: icmp_seq=5 ttl=64 time=795 ms
64 bytes from 192.168.1.14: icmp_seq=6 ttl=64 time=1841 ms
64 bytes from 192.168.1.14: icmp_seq=7 ttl=64 time=810 ms
64 bytes from 192.168.1.14: icmp_seq=8 ttl=64 time=1860 ms
64 bytes from 192.168.1.14: icmp_seq=9 ttl=64 time=812 ms
64 bytes from 192.168.1.14: icmp_seq=10 ttl=64 time=48.6 ms
Where as with this patch I get:
PING 192.168.1.14 (192.168.1.14) 56(84) bytes of data.
64 bytes from 192.168.1.14: icmp_seq=1 ttl=64 time=3.96 ms
64 bytes from 192.168.1.14: icmp_seq=2 ttl=64 time=1.97 ms
64 bytes from 192.168.1.14: icmp_seq=3 ttl=64 time=17.2 ms
64 bytes from 192.168.1.14: icmp_seq=4 ttl=64 time=2.46 ms
64 bytes from 192.168.1.14: icmp_seq=5 ttl=64 time=2.83 ms
64 bytes from 192.168.1.14: icmp_seq=6 ttl=64 time=1.40 ms
64 bytes from 192.168.1.14: icmp_seq=7 ttl=64 time=2.10 ms
64 bytes from 192.168.1.14: icmp_seq=8 ttl=64 time=1.40 ms
64 bytes from 192.168.1.14: icmp_seq=9 ttl=64 time=2.04 ms
64 bytes from 192.168.1.14: icmp_seq=10 ttl=64 time=1.40 ms
Cc: Dong Aisheng <b29396@freescale.com>
Cc: Ian W MORRISON <ianwmorrison@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Dong Aisheng <aisheng.dong@nxp.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
When sending a msg without asoc established, sctp will send INIT packet
first and then enqueue chunks.
Before receiving INIT_ACK, stream info is not yet alloced. But enqueuing
chunks needs to access stream info, like out stream state and out stream
cnt.
This patch is to fix it by allocing out stream info when initializing an
asoc, allocing in stream and re-allocing out stream when processing init.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When calculating po->tp_hdrlen + po->tp_reserve the result can overflow.
Fix by checking that tp_reserve <= INT_MAX on assign.
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When calculating rb->frames_per_block * req->tp_block_nr the result
can overflow.
Add a check that tp_block_size * tp_block_nr <= UINT_MAX.
Since frames_per_block <= tp_block_size, the expression would
never overflow.
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Subtracting tp_sizeof_priv from tp_block_size and casting to int
to check whether one is less then the other doesn't always work
(both of them are unsigned ints).
Compare them as is instead.
Also cast tp_sizeof_priv to u64 before using BLK_PLUS_PRIV, as
it can overflow inside BLK_PLUS_PRIV otherwise.
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A relatively large pile of fixes for mainline, the first since the merge
window. The biggest block of changes here by volume is the sun8i-codec
set, the driver was newly added in the merge window but it was realized
that renaming some of the user visible controls was required so these
are being pushed for v4.11 to avoid the original code appearing in a
release. Otherwise it's all fairly standard bugfix stuff.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAljdNc0THGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0IgMB/9SGwZvXPsI0w2q/f7pP4Q7SntvmywP
o+gyktSaC/nLDpdPkdOBMekzhpkzvEgJsg/07iop/J/qsYSgmRoT+UkGB5KMBYxS
aFse8ya9NavulcuCksINMr+kPrd9bMGzev0Y2v9p6nOAZ0Yhqoi0cK/JNeLH8WBE
amgWI7MbZ3vAR5jviKINw57crXsqeJcH7u1IkFNznhUb5MfzO7MdAby2nYnlFiTs
D7XeA/OV/cffwdsI5fylrD0zCd6DekZImjrv31nGi36DIZ275V4uDiN/XQFel069
cQc4CYLgMWXiXGZaRmxjqPZ/Om14VY6i17VsoriNhU8e5CtQlynOogV/
=k725
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v4.11
A relatively large pile of fixes for mainline, the first since the merge
window. The biggest block of changes here by volume is the sun8i-codec
set, the driver was newly added in the merge window but it was realized
that renaming some of the user visible controls was required so these
are being pushed for v4.11 to avoid the original code appearing in a
release. Otherwise it's all fairly standard bugfix stuff.
Upong receiving some errors (EACCES) on commit to the DS the code
doesn't fallback to MDS and intead retrieds to the same DS again.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
A use-after-free was found using KASAN. In brcmf_p2p_del_if() the virtual
interface is removed using call to brcmf_remove_interface(). After that
the virtual interface instance has been freed and should not be referenced.
Solve this by storing the nl80211 iftype in local variable, which is used
in a couple of places anyway.
Cc: stable@vger.kernel.org # 4.10.x, 4.9.x
Reported-by: Daniel J Blueman <daniel@quora.org>
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Following commit cceb0a5973 ("rtlwifi: Add work queue for c2h cmd."),
the following BUG is reported when rtl8723be is used:
BUG: sleeping function called from invalid context at mm/slab.h:432
in_atomic(): 1, irqs_disabled(): 1, pid: 0, name: swapper/0
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W O 4.11.0-rc3-wl+ #276
Hardware name: TOSHIBA TECRA A50-A/TECRA A50-A, BIOS Version 4.50 09/29/2014
Call Trace:
<IRQ>
dump_stack+0x63/0x89
___might_sleep+0xe9/0x130
__might_sleep+0x4a/0x90
kmem_cache_alloc_trace+0x19f/0x200
? rtl_c2hcmd_enqueue+0x3e/0x110 [rtlwifi]
rtl_c2hcmd_enqueue+0x3e/0x110 [rtlwifi]
rtl8723be_c2h_packet_handler+0xac/0xc0 [rtl8723be]
rtl8723be_rx_command_packet+0x37/0x5c [rtl8723be]
_rtl_pci_rx_interrupt+0x200/0x6b0 [rtl_pci]
_rtl_pci_interrupt+0x20c/0x5d0 [rtl_pci]
__handle_irq_event_percpu+0x3f/0x1d0
handle_irq_event_percpu+0x23/0x60
handle_irq_event+0x3c/0x60
handle_fasteoi_irq+0xa2/0x170
handle_irq+0x20/0x30
do_IRQ+0x48/0xd0
common_interrupt+0x89/0x89
...
Although commit cceb0a5973 converted most c2h commands to use a work
queue, the Bluetooth coexistence routines can be in atomic mode when
they execute such a call.
Fixes: cceb0a5973 ("rtlwifi: Add work queue for c2h cmd.")
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Here are three patches intended for 4.11. The first one is an RCU fix
by Sari. The second one is a fix for a potential out-of-bounds access
crash by Dan. And finally, the third and bigger one, is a fix for
IBSS, which has been broken since DQA was enabled in the driver.
-----BEGIN PGP SIGNATURE-----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=qcuc
-----END PGP SIGNATURE-----
Merge tag 'iwlwifi-for-kalle-2017-03-29' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
iwlwifi fixes for 4.11
Here are three patches intended for 4.11. The first one is an RCU fix
by Sari. The second one is a fix for a potential out-of-bounds access
crash by Dan. And finally, the third and bigger one, is a fix for
IBSS, which has been broken since DQA was enabled in the driver.
Commit 5c492c3f52 ("arm64: smp: Add function to determine if cpus are
stuck in the kernel") added a helper function to determine if die() is
supported in cpu_ops. This function assumes a cpu will have a valid
cpu_ops entry, but that may not be the case for cpu0 is spin-table or
parking protocol is used to boot secondary cpus. In that case, there
is a NULL dereference if have_cpu_die() is called by cpu0. So add a
check for a valid cpu_ops before dereferencing it.
Fixes: 5c492c3f52 ("arm64: smp: Add function to determine if cpus are stuck in the kernel")
Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Without this, the first modeset would dereference past the allocation
when trying to free the mm node.
Signed-off-by: Eric Anholt <eric@anholt.net>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170328201343.4884-1-eric@anholt.net
Fixes: d8dbf44f13 ("drm/vc4: Make the CRTCs cooperate on allocating display lists.")
Cc: <stable@vger.kernel.org> # v4.6+
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Pull in changes for 4.11 from the i2c-mux subsubsystem:
"Here are some changes for the pca954x driver. It's a revert of the
un-endorsed ACPI support and a fixup in the handling of PCA9546."
In blk_mq_alloc_request_hctx, blk_mq_sched_get_request doesn't
get sw context so we don't need to put the context with
blk_mq_put_ctx. Unless, we will see preempt counter underflow.
Cc: Omar Sandoval <osandov@fb.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Trivial fix to spelling mistake in pr_debug message.
Signed-off-by: Colin King <colin.king@canonical.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-janitors@vger.kernel.org
Link: http://lkml.kernel.org/r/20170330095440.19444-1-colin.king@canonical.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The GCC '-maccumulate-outgoing-args' flag is enabled for most configs,
mostly because of issues which are no longer relevant. For most
configs, and with most recent versions of GCC, it's no longer needed.
Clarify which cases need it, and only enable it for those cases. Also
produce a compile-time error for the ftrace graph + mcount + '-Os' case,
which will otherwise cause runtime failures.
The main benefit of '-maccumulate-outgoing-args' is that it prevents an
ugly prologue for functions which have aligned stacks. But removing the
option also has some benefits: more readable argument saves, smaller
text size, and (presumably) slightly improved performance.
Here are the object size savings for 32-bit and 64-bit defconfig
kernels:
text data bss dec hex filename
10006710 3543328 1773568 15323606 e9d1d6 vmlinux.x86-32.before
9706358 3547424 1773568 15027350 e54c96 vmlinux.x86-32.after
text data bss dec hex filename
10652105 4537576 843776 16033457 f4a6b1 vmlinux.x86-64.before
10639629 4537576 843776 16020981 f475f5 vmlinux.x86-64.after
That comes out to a 3% text size improvement on x86-32 and a 0.1% text
size improvement on x86-64.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170316193133.zrj6gug53766m6nn@treble
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In vmw_surface_define_ioctl(), the 'num_sizes' is the sum of the
'req->mip_levels' array. This array can be assigned any value from
the user space. As both the 'num_sizes' and the array is uint32_t,
it is easy to make 'num_sizes' overflow. The later 'mip_levels' is
used as the loop count. This can lead an oob write. Add the check of
'req->mip_levels' to avoid this.
Cc: <stable@vger.kernel.org>
Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
The mesa winsys sometimes uses unimplemented parameter requests to
check for features. Remove the error message to avoid bloating the
kernel log.
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
On recent kernels, calling drm_ht_remove triggers a might_sleep() warning
from within vfree(). So avoid calling it from atomic context. The use-cases
we fix here are both from destructors so there should be no concurrent
use of the hash tables.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Previously, when a surface was opened using a legacy (non prime) handle,
it was verified to have been created by a client in the same master realm.
Relax this so that opening is also allowed recursively if the client
already has the surface open.
This works around a regression in svga mesa where opening of a shared
surface is used recursively to obtain surface information.
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Richard Genoud
Uwe Kleine-König
Dmitry Bilunov
Thomas Gleixner
Jiri Olsa
Arnaldo Carvalho de Melo
Matt Redfearn
Hui Wang
Zhengyi Shen
Yazen Ghannam
Dave Airlie
Vineet Gupta
Alexey Brodkin
Suresh Reddy
Linus Torvalds
Andi Kleen
Max Filippov
Ludovic Desroches
Hans de Goede
Masahiro Yamada
Shaokun Zhang
Xin Long
Andrey Konovalov
Takashi Iwai
Olga Kornievskaia
Arend Van Spriel
Larry Finger
Kalle Valo
Mark Salter
Eric Anholt
Wolfram Sang
Minchan Kim
Colin Ian King
Josh Poimboeuf
Li Qiang
Thomas Hellstrom