Граф коммитов

8786 Коммитов

Автор SHA1 Сообщение Дата
Jiri Benc 63d008a4e9 ipv4: send arp replies to the correct tunnel
When using ip lwtunnels, the additional data for xmit (basically, the actual
tunnel to use) are carried in ip_tunnel_info either in dst->lwtstate or in
metadata dst. When replying to ARP requests, we need to send the reply to
the same tunnel the request came from. This means we need to construct
proper metadata dst for ARP replies.

We could perform another route lookup to get a dst entry with the correct
lwtstate. However, this won't always ensure that the outgoing tunnel is the
same as the incoming one, and it won't work anyway for IPv4 duplicate
address detection.

The only thing to do is to "reverse" the ip_tunnel_info.

Signed-off-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 14:31:36 -07:00
Eric Dumazet ed2e923945 tcp/dccp: fix timewait races in timer handling
When creating a timewait socket, we need to arm the timer before
allowing other cpus to find it. The signal allowing cpus to find
the socket is setting tw_refcnt to non zero value.

As we set tw_refcnt in __inet_twsk_hashdance(), we therefore need to
call inet_twsk_schedule() first.

This also means we need to remove tw_refcnt changes from
inet_twsk_schedule() and let the caller handle it.

Note that because we use mod_timer_pinned(), we have the guarantee
the timer wont expire before we set tw_refcnt as we run in BH context.

To make things more readable I introduced inet_twsk_reschedule() helper.

When rearming the timer, we can use mod_timer_pending() to make sure
we do not rearm a canceled timer.

Note: This bug can possibly trigger if packets of a flow can hit
multiple cpus. This does not normally happen, unless flow steering
is broken somehow. This explains this bug was spotted ~5 months after
its introduction.

A similar fix is needed for SYN_RECV sockets in reqsk_queue_hash_req(),
but will be provided in a separate patch for proper tracking.

Fixes: 789f558cfb ("tcp/dccp: get rid of central timewait timer")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Ying Cai <ycai@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-21 16:32:29 -07:00
Nicolas Dichtel 83cf9a2521 ip6tunnel: make rx/tx bytes counters consistent
Like the previous patch, which fixes ipv4 tunnels, here is the ipv6 part.

Before the patch, the external ipv6 header + gre header were included on
tx.

After the patch:
$ ping -c1 192.168.6.121 ; ip -s l ls dev ip6gre1
PING 192.168.6.121 (192.168.6.121) 56(84) bytes of data.
64 bytes from 192.168.6.121: icmp_req=1 ttl=64 time=1.92 ms

--- 192.168.6.121 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 1.923/1.923/1.923/0.000 ms
7: ip6gre1@NONE: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1440 qdisc noqueue state UNKNOWN mode DEFAULT group default
    link/gre6 20:01:06:60:30:08:c1:c3:00:00:00:00:00:00:01:23 peer 20:01:06:60:30:08:c1:c3:00:00:00:00:00:00:01:21
    RX: bytes  packets  errors  dropped overrun mcast
    84         1        0       0       0       0
    TX: bytes  packets  errors  dropped carrier collsns
    84         1        0       0       0       0
$ ping -c1 192.168.1.121 ; ip -s l ls dev ip6tnl1
PING 192.168.1.121 (192.168.1.121) 56(84) bytes of data.
64 bytes from 192.168.1.121: icmp_req=1 ttl=64 time=2.28 ms

--- 192.168.1.121 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 2.288/2.288/2.288/0.000 ms
8: ip6tnl1@NONE: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1452 qdisc noqueue state UNKNOWN mode DEFAULT group default
    link/tunnel6 2001:660:3008:c1c3::123 peer 2001:660:3008:c1c3::121
    RX: bytes  packets  errors  dropped overrun mcast
    84         1        0       0       0       0
    TX: bytes  packets  errors  dropped carrier collsns
    84         1        0       0       0       0

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-20 22:36:42 -07:00
Nikola Forró 0315e38270 net: Fix behaviour of unreachable, blackhole and prohibit routes
Man page of ip-route(8) says following about route types:

  unreachable - these destinations are unreachable.  Packets are dis‐
  carded and the ICMP message host unreachable is generated.  The local
  senders get an EHOSTUNREACH error.

  blackhole - these destinations are unreachable.  Packets are dis‐
  carded silently.  The local senders get an EINVAL error.

  prohibit - these destinations are unreachable.  Packets are discarded
  and the ICMP message communication administratively prohibited is
  generated.  The local senders get an EACCES error.

In the inet6 address family, this was correct, except the local senders
got ENETUNREACH error instead of EHOSTUNREACH in case of unreachable route.
In the inet address family, all three route types generated ICMP message
net unreachable, and the local senders got ENETUNREACH error.

In both address families all three route types now behave consistently
with documentation.

Signed-off-by: Nikola Forró <nforro@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-20 21:45:08 -07:00
David Ahern 58189ca7b2 net: Fix vti use case with oif in dst lookups
Steffen reported that the recent change to add oif to dst lookups breaks
the VTI use case. The problem is that with the oif set in the flow struct
the comparison to the nh_oif is triggered. Fix by splitting the
FLOWI_FLAG_VRFSRC into 2 flags -- one that triggers the vrf device cache
bypass (FLOWI_FLAG_VRFSRC) and another telling the lookup to not compare
nh oif (FLOWI_FLAG_SKIP_NH_OIF).

Fixes: 42a7b32b73 ("xfrm: Add oif to dst lookups")

Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-17 16:36:34 -07:00
Roopa Prabhu 37a1d3611c ipv6: include NLM_F_REPLACE in route replace notifications
This patch adds NLM_F_REPLACE flag to ipv6 route replace notifications.
This makes nlm_flags in ipv6 replace notifications consistent
with ipv4.

Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-17 15:00:27 -07:00
Martin KaFai Lau 70da5b5c53 ipv6: Replace spinlock with seqlock and rcu in ip6_tunnel
This patch uses a seqlock to ensure consistency between idst->dst and
idst->cookie.  It also makes dst freeing from fib tree to undergo a
rcu grace period.

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-15 14:53:05 -07:00
Martin KaFai Lau cdf3464e6c ipv6: Fix dst_entry refcnt bugs in ip6_tunnel
Problems in the current dst_entry cache in the ip6_tunnel:

1. ip6_tnl_dst_set is racy.  There is no lock to protect it:
   - One major problem is that the dst refcnt gets messed up. F.e.
     the same dst_cache can be released multiple times and then
     triggering the infamous dst refcnt < 0 warning message.
   - Another issue is the inconsistency between dst_cache and
     dst_cookie.

   It can be reproduced by adding and removing the ip6gre tunnel
   while running a super_netperf TCP_CRR test.

2. ip6_tnl_dst_get does not take the dst refcnt before returning
   the dst.

This patch:
1. Create a percpu dst_entry cache in ip6_tnl
2. Use a spinlock to protect the dst_cache operations
3. ip6_tnl_dst_get always takes the dst refcnt before returning

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-15 14:53:05 -07:00
Martin KaFai Lau f230d1e891 ipv6: Rename the dst_cache helper functions in ip6_tunnel
It is a prep work to fix the dst_entry refcnt bugs in
ip6_tunnel.

This patch rename:
1. ip6_tnl_dst_check() to ip6_tnl_dst_get() to better
   reflect that it will take a dst refcnt in the next patch.
2. ip6_tnl_dst_store() to ip6_tnl_dst_set() to have a more
   conventional name matching with ip6_tnl_dst_get().

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-15 14:53:04 -07:00
Linus Torvalds 65c61bc5db Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) Fix out-of-bounds array access in netfilter ipset, from Jozsef
    Kadlecsik.

 2) Use correct free operation on netfilter conntrack templates, from
    Daniel Borkmann.

 3) Fix route leak in SCTP, from Marcelo Ricardo Leitner.

 4) Fix sizeof(pointer) in mac80211, from Thierry Reding.

 5) Fix cache pointer comparison in ip6mr leading to missed unlock of
    mrt_lock.  From Richard Laing.

 6) rds_conn_lookup() needs to consider network namespace in key
    comparison, from Sowmini Varadhan.

 7) Fix deadlock in TIPC code wrt broadcast link wakeups, from Kolmakov
    Dmitriy.

 8) Fix fd leaks in bpf syscall, from Daniel Borkmann.

 9) Fix error recovery when installing ipv6 multipath routes, we would
    delete the old route before we would know if we could fully commit
    to the new set of nexthops.  Fix from Roopa Prabhu.

10) Fix run-time suspend problems in r8152, from Hayes Wang.

11) In fec, don't program the MAC address into the chip when the clocks
    are gated off.  From Fugang Duan.

12) Fix poll behavior for netlink sockets when using rx ring mmap, from
    Daniel Borkmann.

13) Don't allocate memory with GFP_KERNEL from get_stats64 in r8169
    driver, from Corinna Vinschen.

14) In TCP Cubic congestion control, handle idle periods better where we
    are application limited, in order to keep cwnd from growing out of
    control.  From Eric Dumzet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (65 commits)
  tcp_cubic: better follow cubic curve after idle period
  tcp: generate CA_EVENT_TX_START on data frames
  xen-netfront: respect user provided max_queues
  xen-netback: respect user provided max_queues
  r8169: Fix sleeping function called during get_stats64, v2
  ether: add IEEE 1722 ethertype - TSN
  netlink, mmap: fix edge-case leakages in nf queue zero-copy
  netlink, mmap: don't walk rx ring on poll if receive queue non-empty
  cxgb4: changes for new firmware 1.14.4.0
  net: fec: add netif status check before set mac address
  r8152: fix the runtime suspend issues
  r8152: split DRIVER_VERSION
  ipv6: fix ifnullfree.cocci warnings
  add microchip LAN88xx phy driver
  stmmac: fix check for phydev being open
  net: qlcnic: delete redundant memsets
  net: mv643xx_eth: use kzalloc
  net: jme: use kzalloc() instead of kmalloc+memset
  net: cavium: liquidio: use kzalloc in setup_glist()
  net: ipv6: use common fib_default_rule_pref
  ...
2015-09-10 13:53:15 -07:00
Phil Sutter f53de1e9a4 net: ipv6: use common fib_default_rule_pref
This switches IPv6 policy routing to use the shared
fib_default_rule_pref() function of IPv4 and DECnet. It is also used in
multicast routing for IPv4 as well as IPv6.

The motivation for this patch is a complaint about iproute2 behaving
inconsistent between IPv4 and IPv6 when adding policy rules: Formerly,
IPv6 rules were assigned a fixed priority of 0x3FFF whereas for IPv4 the
assigned priority value was decreased with each rule added.

Since then all users of the default_pref field have been converted to
assign the generic function fib_default_rule_pref(), fib_nl_newrule()
may just use it directly instead. Therefore get rid of the function
pointer altogether and make fib_default_rule_pref() static, as it's not
used outside fib_rules.c anymore.

Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-09 14:19:50 -07:00
Linus Torvalds 26d2177e97 Changes for 4.3
- Create drivers/staging/rdma
 - Move amso1100 driver to staging/rdma and schedule for deletion
 - Move ipath driver to staging/rdma and schedule for deletion
 - Add hfi1 driver to staging/rdma and set TODO for move to regular tree
 - Initial support for namespaces to be used on RDMA devices
 - Add RoCE GID table handling to the RDMA core caching code
 - Infrastructure to support handling of devices with differing
   read and write scatter gather capabilities
 - Various iSER updates
 - Kill off unsafe usage of global mr registrations
 - Update SRP driver
 - Misc. mlx4 driver updates
 - Support for the mr_alloc verb
 - Support for a netlink interface between kernel and user space cache
   daemon to speed path record queries and route resolution
 - Ininitial support for safe hot removal of verbs devices
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJV7v8wAAoJELgmozMOVy/d2dcP/3PXnGFPgFGJODKE6VCZtTvj
 nooNXRKXjxv470UT5DiAX7SNcBxzzS7Zl/Lj+831H9iNXUyzuH31KtBOAZ3W03vZ
 yXwCB2caOStSldTRSUUvPe2aIFPnyNmSpC4i6XcJLJMCFijKmxin5pAo8qE44BQU
 yjhT+wC9P6LL5wZXsn/nFIMLjOFfu0WBFHNp3gs5j59paxlx5VeIAZk16aQZH135
 m7YCyicwrS8iyWQl2bEXRMon2vlCHlX2RHmOJ4f/P5I0quNcGF2+d8Yxa+K1VyC5
 zcb3OBezz+wZtvh16yhsDfSPqHWirljwID2VzOgRSzTJWvQjju8VkwHtkq6bYoBW
 egIxGCHcGWsD0R5iBXLYr/tB+BmjbDObSm0AsR4+JvSShkeVA1IpeoO+19162ixE
 n6CQnk2jCee8KXeIN4PoIKsjRSbIECM0JliWPLoIpuTuEhhpajftlSLgL5hf1dzp
 HrSy6fXmmoRj7wlTa7DnYIC3X+ffwckB8/t1zMAm2sKnIFUTjtQXF7upNiiyWk4L
 /T1QEzJ2bLQckQ9yY4v528SvBQwA4Dy1amIQB7SU8+2S//bYdUvhysWPkdKC4oOT
 WlqS5PFDCI31MvNbbM3rUbMAD8eBAR8ACw9ZpGI/Rffm5FEX5W3LoxA8gfEBRuqt
 30ZYFuW8evTL+YQcaV65
 =EHLg
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma

Pull inifiniband/rdma updates from Doug Ledford:
 "This is a fairly sizeable set of changes.  I've put them through a
  decent amount of testing prior to sending the pull request due to
  that.

  There are still a few fixups that I know are coming, but I wanted to
  go ahead and get the big, sizable chunk into your hands sooner rather
  than waiting for those last few fixups.

  Of note is the fact that this creates what is intended to be a
  temporary area in the drivers/staging tree specifically for some
  cleanups and additions that are coming for the RDMA stack.  We
  deprecated two drivers (ipath and amso1100) and are waiting to hear
  back if we can deprecate another one (ehca).  We also put Intel's new
  hfi1 driver into this area because it needs to be refactored and a
  transfer library created out of the factored out code, and then it and
  the qib driver and the soft-roce driver should all be modified to use
  that library.

  I expect drivers/staging/rdma to be around for three or four kernel
  releases and then to go away as all of the work is completed and final
  deletions of deprecated drivers are done.

  Summary of changes for 4.3:

   - Create drivers/staging/rdma
   - Move amso1100 driver to staging/rdma and schedule for deletion
   - Move ipath driver to staging/rdma and schedule for deletion
   - Add hfi1 driver to staging/rdma and set TODO for move to regular
     tree
   - Initial support for namespaces to be used on RDMA devices
   - Add RoCE GID table handling to the RDMA core caching code
   - Infrastructure to support handling of devices with differing read
     and write scatter gather capabilities
   - Various iSER updates
   - Kill off unsafe usage of global mr registrations
   - Update SRP driver
   - Misc  mlx4 driver updates
   - Support for the mr_alloc verb
   - Support for a netlink interface between kernel and user space cache
     daemon to speed path record queries and route resolution
   - Ininitial support for safe hot removal of verbs devices"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (136 commits)
  IB/ipoib: Suppress warning for send only join failures
  IB/ipoib: Clean up send-only multicast joins
  IB/srp: Fix possible protection fault
  IB/core: Move SM class defines from ib_mad.h to ib_smi.h
  IB/core: Remove unnecessary defines from ib_mad.h
  IB/hfi1: Add PSM2 user space header to header_install
  IB/hfi1: Add CSRs for CONFIG_SDMA_VERBOSITY
  mlx5: Fix incorrect wc pkey_index assignment for GSI messages
  IB/mlx5: avoid destroying a NULL mr in reg_user_mr error flow
  IB/uverbs: reject invalid or unknown opcodes
  IB/cxgb4: Fix if statement in pick_local_ip6adddrs
  IB/sa: Fix rdma netlink message flags
  IB/ucma: HW Device hot-removal support
  IB/mlx4_ib: Disassociate support
  IB/uverbs: Enable device removal when there are active user space applications
  IB/uverbs: Explicitly pass ib_dev to uverbs commands
  IB/uverbs: Fix race between ib_uverbs_open and remove_one
  IB/uverbs: Fix reference counting usage of event files
  IB/core: Make ib_dealloc_pd return void
  IB/srp: Create an insecure all physical rkey only if needed
  ...
2015-09-09 08:33:31 -07:00
Michal Hocko e752eb6881 memcg: move memcg_proto_active from sock.h
The only user is sock_update_memcg which is living in memcontrol.c so it
doesn't make much sense to pollute sock.h by this inline helper.  Move it
to memcontrol.c and open code it into its only caller.

Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-08 15:35:28 -07:00
Michal Hocko 33398cf2f3 memcg: export struct mem_cgroup
mem_cgroup structure is defined in mm/memcontrol.c currently which means
that the code outside of this file has to use external API even for
trivial access stuff.

This patch exports mm_struct with its dependencies and makes some of the
exported functions inlines.  This even helps to reduce the code size a bit
(make defconfig + CONFIG_MEMCG=y)

  text		data    bss     dec     	 hex 	filename
  12355346        1823792 1089536 15268674         e8fb42 vmlinux.before
  12354970        1823792 1089536 15268298         e8f9ca vmlinux.after

This is not much (370B) but better than nothing.

We also save a function call in some hot paths like callers of
mem_cgroup_count_vm_event which is used for accounting.

The patch doesn't introduce any functional changes.

[vdavykov@parallels.com: inline memcg_kmem_is_active]
[vdavykov@parallels.com: do not expose type outside of CONFIG_MEMCG]
[akpm@linux-foundation.org: memcontrol.h needs eventfd.h for eventfd_ctx]
[akpm@linux-foundation.org: export mem_cgroup_from_task() to modules]
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Vladimir Davydov <vdavydov@parallels.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-08 15:35:28 -07:00
David S. Miller 080fff50a3 For the first round of fixes, we have this:
* fix for the sizeof() pointer type issue
  * a fix for regulatory getting into a restore loop
  * a fix for rfkill global 'all' state, it needs to be stored
    everywhere to apply correctly to new rfkill instances
  * properly refuse CQM RSSI when it cannot actually be used
  * protect HT TDLS traffic properly in non-HT networks
  * don't incorrectly advertise 80 MHz support when not allowed
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJV6av+AAoJEDBSmw7B7bqrNYYP/1kZjdk9s4wPHpQndfSWK/sj
 yTjysh/VXZ5Jyzkcmg337AjEuuJ/SntDXjMXEKTxHHrt5fmHFBvmPErPUY7p7I/t
 MJqxVnYGypGW4LImyXYRJbejabmPrxtHC+jcWibw24yBCzJGCXF/MeKCotksnvIn
 IoJDvUHrVFZhfzFRepdozJi1Qy2Y04Q7zXywplW6XFYWxdfDWaWyno/xh+rM8oO7
 xSgpkuj4FDfimDBjzJOHwBH3xOlt/uHoB97G0TJbJ6k0R6a8aTz8eK5OWB4rFcn+
 BsuQfaWcrGg9fJsoqz4mYlWf/F4Qj/gU9Gr5sBUWWa0xQ7HctcgJ/t27XjUWP7oV
 VnQ9YQt/SukG3BVf8GuNqaSo7/7oprWHdDYRH0tnvImXCWsUlHM8gv8MrG0UOHGC
 4I4qgPLHon6Ui3lNHfivl8iSDFT+jfsMDMWiB6kKZRpUOdEicRrepMoDARVbTYck
 h6uY4Tx6OQ39evLSXjyrCWb0aOr2WoDCypxEkpE+fgDsWr8yTV0Ti0QZfVqatO3d
 d4GQb6U5Zkd14ymKtzULa5qjOw1TmnKpxVzSSdrONaPBVdUDsl4QH38gIppFjGsV
 61Gn3PXRRgy+VAib/YyIYqilvdhZ2TdXaSVAEyKv6WjKavOFA/8KsDPmJsyKoCSn
 1dDOwaiqgfu2bK1PTU9A
 =xw8r
 -----END PGP SIGNATURE-----

Merge tag 'mac80211-for-davem-2015-09-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
For the first round of fixes, we have this:
 * fix for the sizeof() pointer type issue
 * a fix for regulatory getting into a restore loop
 * a fix for rfkill global 'all' state, it needs to be stored
   everywhere to apply correctly to new rfkill instances
 * properly refuse CQM RSSI when it cannot actually be used
 * protect HT TDLS traffic properly in non-HT networks
 * don't incorrectly advertise 80 MHz support when not allowed
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-06 19:49:55 -07:00
David S. Miller 53cfd053e4 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
Conflicts:
	include/net/netfilter/nf_conntrack.h

The conflict was an overlap between changing the type of the zone
argument to nf_ct_tmpl_alloc() whilst exporting nf_ct_tmpl_free.

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net, they are:

1) Oneliner to restore maps in nf_tables since we support addressing registers
   at 32 bits level.

2) Restore previous default behaviour in bridge netfilter when CONFIG_IPV6=n,
   oneliner from Bernhard Thaler.

3) Out of bound access in ipset hash:net* set types, reported by Dave Jones'
   KASan utility, patch from Jozsef Kadlecsik.

4) Fix ipset compilation with gcc 4.4.7 related to C99 initialization of
   unnamed unions, patch from Elad Raz.

5) Add a workaround to address inconsistent endianess in the res_id field of
   nfnetlink batch messages, reported by Florian Westphal.

6) Fix error paths of CT/synproxy since the conntrack template was moved to use
   kmalloc, patch from Daniel Borkmann.

All of them look good to me to reach 4.2, I can route this to -stable myself
too, just let me know what you prefer.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-05 21:57:42 -07:00
Avri Altman 22f66895e6 mac80211: protect non-HT BSS when HT TDLS traffic exists
HT TDLS traffic should be protected in a non-HT BSS to avoid
collisions. Therefore, when TDLS peers join/leave, check if
protection is (now) needed and set the ht_operation_mode of
the virtual interface according to the HT capabilities of the
TDLS peer(s).

This works because a non-HT BSS connection never sets (or
otherwise uses) the ht_operation_mode; it just means that
drivers must be aware that this field applies to all HT
traffic for this virtual interface, not just the traffic
within the BSS. Document that.

Signed-off-by: Avri Altman <avri.altman@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-04 14:25:46 +02:00
Daniel Borkmann 62da98656b netfilter: nf_conntrack: make nf_ct_zone_dflt built-in
Fengguang reported, that some randconfig generated the following linker
issue with nf_ct_zone_dflt object involved:

  [...]
  CC      init/version.o
  LD      init/built-in.o
  net/built-in.o: In function `ipv4_conntrack_defrag':
  nf_defrag_ipv4.c:(.text+0x93e95): undefined reference to `nf_ct_zone_dflt'
  net/built-in.o: In function `ipv6_defrag':
  nf_defrag_ipv6_hooks.c:(.text+0xe3ffe): undefined reference to `nf_ct_zone_dflt'
  make: *** [vmlinux] Error 1

Given that configurations exist where we have a built-in part, which is
accessing nf_ct_zone_dflt such as the two handlers nf_ct_defrag_user()
and nf_ct6_defrag_user(), and a part that configures nf_conntrack as a
module, we must move nf_ct_zone_dflt into a fixed, guaranteed built-in
area when netfilter is configured in general.

Therefore, split the more generic parts into a common header under
include/linux/netfilter/ and move nf_ct_zone_dflt into the built-in
section that already holds parts related to CONFIG_NF_CONNTRACK in the
netfilter core. This fixes the issue on my side.

Fixes: 308ac9143e ("netfilter: nf_conntrack: push zone object into functions")
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-02 16:32:56 -07:00
David S. Miller 20a17bf6c0 flow_dissector: Use 'const' where possible.
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01 21:19:17 -07:00
David S. Miller 4b36993d3d flow_dissector: Don't use bit fields.
Just have a flags member instead.

   In file included from include/linux/linkage.h:4:0,
                    from include/linux/kernel.h:6,
                    from net/core/flow_dissector.c:1:
   In function 'flow_keys_hash_start',
       inlined from 'flow_hash_from_keys' at net/core/flow_dissector.c:553:34:
>> include/linux/compiler.h:447:38: error: call to '__compiletime_assert_459' declared with attribute error: BUILD_BUG_ON failed: FLOW_KEYS_HASH_OFFSET % sizeof(u32)

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01 16:46:08 -07:00
Tom Herbert 823b969395 flow_dissector: Add control/reporting of encapsulation
Add an input flag to flow dissector on rather dissection should stop
when encapsulation is detected (IP/IP or GRE). Also, add a key_control
flag that indicates encapsulation was encountered during the
dissection.

Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01 15:06:23 -07:00
Tom Herbert 872b1abb1e flow_dissector: Add flag to stop parsing when an IPv6 flow label is seen
Add an input flag to flow dissector on rather dissection should be
stopped when a flow label is encountered. Presumably, the flow label
is derived from a sufficient hash of an inner transport packet so
further dissection is not needed (that is ports are not included in
the flow hash). Using the flow label instead of ports has the additional
benefit that packet fragments should hash to same value as non-fragments
for a flow (assuming that the same flow label is used).

We set this flag by default in for skb_get_hash.

Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01 15:06:23 -07:00
Tom Herbert 8306b688f1 flow_dissector: Add flag to stop parsing at L3
Add an input flag to flow dissector on rather dissection should be
stopped when an L3 packet is encountered. This would be useful if a
caller just wanted to get IP addresses of the outermost header (e.g.
to do an L3 hash).

Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01 15:06:23 -07:00
Tom Herbert 807e165dc4 flow_dissector: Add control/reporting of fragmentation
Add an input flag to flow dissector on rather dissection should be
attempted on a first fragment. Also add key_control flags to indicate
that a packet is a fragment or first fragment.

Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01 15:06:22 -07:00
Tom Herbert c6cc1ca7f4 flowi: Abstract out functions to get flow hash based on flowi
Create __get_hash_from_flowi6 and __get_hash_from_flowi4 to get the
flow keys and hash based on flowi structures. These are called by
__skb_get_hash_flowi6 and __skb_get_hash_flowi4. Also, created
get_hash_from_flowi6 and get_hash_from_flowi4 which can be called
when just the hash value for a flowi is needed.

Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01 15:06:22 -07:00
Tom Herbert bcc83839ff skbuff: Make __skb_set_sw_hash a general function
Move __skb_set_sw_hash to skbuff.h and add __skb_set_hash which is
a common method (between __skb_set_sw_hash and skb_set_hash) to set
the hash in an skbuff.

Also, move skb_clear_hash to be closer to __skb_set_hash.

Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01 15:06:22 -07:00
Tom Herbert e5276937ae flow_dissector: Move skb related functions to skbuff.h
Move the flow dissector functions that are specific to skbuffs into
skbuff.h out of flow_dissector.h. This makes flow_dissector.h have
no dependencies on skbuff.h.

Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01 15:06:21 -07:00
David Ahern 9b8ff51822 net: Make table id type u32
A number of VRF patches used 'int' for table id. It should be u32 to be
consistent with the rest of the stack.

Fixes:
4e3c89920c ("net: Introduce VRF related flags and helpers")
15be405eb2 ("net: Add inet_addr lookup by table")
30bbaa1950 ("net: Fix up inet_addr_type checks")
021dd3b8a1 ("net: Add routes to the table associated with the device")
dc028da54e ("inet: Move VRF table lookup to inlined function")
f6d3c19274 ("net: FIB tracepoints")

Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01 14:32:44 -07:00
Daniel Borkmann 9cf94eab8b netfilter: conntrack: use nf_ct_tmpl_free in CT/synproxy error paths
Commit 0838aa7fcf ("netfilter: fix netns dependencies with conntrack
templates") migrated templates to the new allocator api, but forgot to
update error paths for them in CT and synproxy to use nf_ct_tmpl_free()
instead of nf_conntrack_free().

Due to that, memory is being freed into the wrong kmemcache, but also
we drop the per net reference count of ct objects causing an imbalance.

In Brad's case, this leads to a wrap-around of net->ct.count and thus
lets __nf_conntrack_alloc() refuse to create a new ct object:

  [   10.340913] xt_addrtype: ipv6 does not support BROADCAST matching
  [   10.810168] nf_conntrack: table full, dropping packet
  [   11.917416] r8169 0000:07:00.0 eth0: link up
  [   11.917438] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  [   12.815902] nf_conntrack: table full, dropping packet
  [   15.688561] nf_conntrack: table full, dropping packet
  [   15.689365] nf_conntrack: table full, dropping packet
  [   15.690169] nf_conntrack: table full, dropping packet
  [   15.690967] nf_conntrack: table full, dropping packet
  [...]

With slab debugging, it also reports the wrong kmemcache (kmalloc-512 vs.
nf_conntrack_ffffffff81ce75c0) and reports poison overwrites, etc. Thus,
to fix the problem, export and use nf_ct_tmpl_free() instead.

Fixes: 0838aa7fcf ("netfilter: fix netns dependencies with conntrack templates")
Reported-by: Brad Jackson <bjackson0971@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-09-01 12:15:08 +02:00
Pravin B Shelar 63b6c13dbb tun_dst: Remove opts_size
opts_size is only written and never read. Following patch
removes this unused variable.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31 21:23:42 -07:00
Eric Dumazet c42858eaf4 gro_cells: remove spinlock protecting receive queues
As David pointed out, spinlock are no longer needed
to protect the per cpu queues used in gro cells infrastructure.

Also use new napi_complete_done() API so that gro_flush_timeout
tweaks have an effect.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31 15:17:17 -07:00
Daniel Borkmann c3a8d94746 tcp: use dctcp if enabled on the route to the initiator
Currently, the following case doesn't use DCTCP, even if it should:
A responder has f.e. Cubic as system wide default, but for a specific
route to the initiating host, DCTCP is being set in RTAX_CC_ALGO. The
initiating host then uses DCTCP as congestion control, but since the
initiator sets ECT(0), tcp_ecn_create_request() doesn't set ecn_ok,
and we have to fall back to Reno after 3WHS completes.

We were thinking on how to solve this in a minimal, non-intrusive
way without bloating tcp_ecn_create_request() needlessly: lets cache
the CA ecn option flag in RTAX_FEATURES. In other words, when ECT(0)
is set on the SYN packet, set ecn_ok=1 iff route RTAX_FEATURES
contains the unexposed (internal-only) DST_FEATURE_ECN_CA. This allows
to only do a single metric feature lookup inside tcp_ecn_create_request().

Joint work with Florian Westphal.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31 12:34:00 -07:00
Pravin B Shelar 4c22279848 ip-tunnel: Use API to access tunnel metadata options.
Currently tun-info options pointer is used in few cases to
pass options around. But tunnel options can be accessed using
ip_tunnel_info_opts() API without using the pointer. Following
patch removes the redundant pointer and consistently make use
of API.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Reviewed-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31 12:28:56 -07:00
Raghavendra K T c4c6bc3146 net: Introduce helper functions to get the per cpu data
Signed-off-by: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-30 21:48:58 -07:00
Matan Barak e999869548 net/bonding: Export bond_option_active_slave_get_rcu
Some consumers of the netdev events API would like to know who is the
active slave when a NETDEV_CHANGEUPPER or NETDEV_BONDING_FAILOVER
events occur. For example, when managing RoCE GIDs, GIDs based on the
bond's ips should only be set on the port which corresponds to active
slave netdevice.

Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-30 18:08:50 -04:00
Matan Barak 399e6f9581 net/ipv6: Export addrconf_ifid_eui48
For loopback purposes, RoCE devices should have a default GID in the
port GID table, even when the interface is down. In order to do so,
we use the IPv6 link local address which would have been genenrated
for the related Ethernet netdevice when it goes up as a default GID.

addrconf_ifid_eui48 is used to gernerate this address, export it.

Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-30 18:08:49 -04:00
Jiri Benc a43a9ef6a2 vxlan: do not receive IPv4 packets on IPv6 socket
By default (subject to the sysctl settings), IPv6 sockets listen also for
IPv4 traffic. Vxlan is not prepared for that and expects IPv6 header in
packets received through an IPv6 socket.

In addition, it's currently not possible to have both IPv4 and IPv6 vxlan
tunnel on the same port (unless bindv6only sysctl is enabled), as it's not
possible to create and bind both IPv4 and IPv6 vxlan interfaces and there's
no way to specify both IPv4 and IPv6 remote/group IP addresses.

Set IPV6_V6ONLY on vxlan sockets to fix both of these issues. This is not
done globally in udp_tunnel, as l2tp and tipc seems to work okay when
receiving IPv4 packets on IPv6 socket and people may rely on this behavior.
The other tunnels (geneve and fou) do not support IPv6.

Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-29 13:07:54 -07:00
Jiri Benc 7f9562a1f4 ip_tunnels: record IP version in tunnel info
There's currently nothing preventing directing packets with IPv6
encapsulation data to IPv4 tunnels (and vice versa). If this happens,
IPv6 addresses are incorrectly interpreted as IPv4 ones.

Track whether the given ip_tunnel_key contains IPv4 or IPv6 data. Store this
in ip_tunnel_info. Reject packets at appropriate places if they are supposed
to be encapsulated into an incompatible protocol.

Signed-off-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-29 13:07:54 -07:00
Jiri Benc 46fa062ad6 ip_tunnels: convert the mode field of ip_tunnel_info to flags
The mode field holds a single bit of information only (whether the
ip_tunnel_info struct is for rx or tx). Change the mode field to bit flags.
This allows more mode flags to be added.

Signed-off-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-29 13:07:54 -07:00
David S. Miller 581a5f2a61 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next
Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

The following patchset contains Netfilter/IPVS updates for your net-next tree.
In sum, patches to address fallout from the previous round plus updates from
the IPVS folks via Simon Horman, they are:

1) Add a new scheduler to IPVS: The weighted overflow scheduling algorithm
   directs network connections to the server with the highest weight that is
   currently available and overflows to the next when active connections exceed
   the node's weight. From Raducu Deaconu.

2) Fix locking ordering in IPVS, always take rtnl_lock in first place. Patch
   from Julian Anastasov.

3) Allow to indicate the MTU to the IPVS in-kernel state sync daemon. From
   Julian Anastasov.

4) Enhance multicast configuration for the IPVS state sync daemon. Also from
   Julian.

5) Resolve sparse warnings in the nf_dup modules.

6) Fix a linking problem when CONFIG_NF_DUP_IPV6 is not set.

7) Add ICMP codes 5 and 6 to IPv6 REJECT target, they are more informative
   subsets of code 1. From Andreas Herz.

8) Revert the jumpstack size calculation from mark_source_chains due to chain
   depth miscalculations, from Florian Westphal.

9) Calm down more sparse warning around the Netfilter tree, again from Florian
   Westphal.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28 16:29:59 -07:00
David Ahern 192132b9a0 net: Add support for VRFs to inetpeer cache
inetpeer caches based on address only, so duplicate IP addresses within
a namespace return the same cached entry. Enhance the ipv4 address key
to contain both the IPv4 address and VRF device index.

Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28 13:32:36 -07:00
David Ahern 5345c2e12d net: Refactor inetpeer address struct
Move the inetpeer_addr_base union to inetpeer_addr and drop
inetpeer_addr_base.

Both the a6 and in6_addr overlays are not needed; drop the __be32 version
and rename in6 to a6 for consistency with ipv4. Add a new u32 array to
the union which removes the need for the typecast in the compare function
and the use of a consistent arg for both ipv4 and ipv6 addresses which
makes the compare function more readable.

Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28 13:32:36 -07:00
David Ahern d39d14ffa2 net: Add helper function to compare inetpeer addresses
tcp_metrics and inetpeer both have functions to compare inetpeer
addresses. Consolidate into 1 version.

Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28 13:32:36 -07:00
David Ahern 3abef286cf net: Add set,get helpers for inetpeer addresses
Use inetpeer set,get helpers in tcp_metrics rather than peeking into
the inetpeer_addr struct.

Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28 13:32:36 -07:00
David Ahern 72afa352d6 net: Introduce ipv4_addr_hash and use it for tcp metrics
Refactors a common line into helper function.

Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28 13:32:35 -07:00
Phil Sutter d66d6c3152 net: sched: register noqueue qdisc
This way users can attach noqueue just like any other qdisc using tc
without having to mess with tx_queue_len first.

Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27 17:14:30 -07:00
Pravin B Shelar 371bd1061d geneve: Consolidate Geneve functionality in single module.
geneve_core module handles send and receive functionality.
This way OVS could use the Geneve API. Now with use of
tunnel meatadata mode OVS can directly use Geneve netdevice.
So there is no need for separate module for Geneve. Following
patch consolidates Geneve protocol processing in single module.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Reviewed-by: Jesse Gross <jesse@nicira.com>
Acked-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27 15:42:48 -07:00
Pravin B Shelar e305ac6cf5 geneve: Add support to collect tunnel metadata.
Following patch create new tunnel flag which enable
tunnel metadata collection on given device. These devices
can be used by tunnel metadata based routing or by OVS.
Geneve Consolidation patch get rid of collect_md_tun to
simplify tunnel lookup further.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Reviewed-by: Jesse Gross <jesse@nicira.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27 15:42:47 -07:00
Pravin B Shelar c29a70d2ca tunnel: introduce udp_tun_rx_dst()
Introduce function udp_tun_rx_dst() to initialize tunnel dst on
receive path.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Reviewed-by: Jesse Gross <jesse@nicira.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27 15:42:47 -07:00
Daniel Borkmann 3b3ae88026 net: sched: consolidate tc_classify{,_compat}
For classifiers getting invoked via tc_classify(), we always need an
extra function call into tc_classify_compat(), as both are being
exported as symbols and tc_classify() itself doesn't do much except
handling of reclassifications when tp->classify() returned with
TC_ACT_RECLASSIFY.

CBQ and ATM are the only qdiscs that directly call into tc_classify_compat(),
all others use tc_classify(). When tc actions are being configured
out in the kernel, tc_classify() effectively does nothing besides
delegating.

We could spare this layer and consolidate both functions. pktgen on
single CPU constantly pushing skbs directly into the netif_receive_skb()
path with a dummy classifier on ingress qdisc attached, improves
slightly from 22.3Mpps to 23.1Mpps.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27 14:18:48 -07:00