When running the SELinux code through sparse, there are a handful of
warnings. This patch resolves some of these warnings caused by
"__rcu" mismatches.
% make W=1 C=1 security/selinux/
Signed-off-by: Paul Moore <paul@paul-moore.com>
There were a number of places in the code where the function
definition did not match the associated comment block as well
at least one file where the appropriate header files were not
included (missing function declaration/prototype); this patch
fixes all of these issue such that building the SELinux code
with "W=1" is now warning free.
% make W=1 security/selinux/
Signed-off-by: Paul Moore <paul@paul-moore.com>
All of sel_ib_pkey_list, sel_netif_list, sel_netnode_list, and
sel_netport_list are declared but never used. Remove them.
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Rename selinux_enabled to selinux_enabled_boot to make it clear that
it only reflects whether SELinux was enabled at boot. Replace the
references to it in the MAC_STATUS audit log in sel_write_enforce()
with hardcoded "1" values because this code is only reachable if SELinux
is enabled and does not change its value, and update the corresponding
MAC_STATUS audit log in sel_write_disable(). Stop clearing
selinux_enabled in selinux_disable() since it is not used outside of
initialization code that runs before selinux_disable() can be reached.
Mark both selinux_enabled_boot and selinux_enforcing_boot as __initdata
since they are only used in initialization code.
Wrap the disabled field in the struct selinux_state with
CONFIG_SECURITY_SELINUX_DISABLE since it is only used for
runtime disable.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
-----BEGIN PGP SIGNATURE-----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=n4ht
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20190917' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
- Add LSM hooks, and SELinux access control hooks, for dnotify,
fanotify, and inotify watches. This has been discussed with both the
LSM and fs/notify folks and everybody is good with these new hooks.
- The LSM stacking changes missed a few calls to current_security() in
the SELinux code; we fix those and remove current_security() for
good.
- Improve our network object labeling cache so that we always return
the object's label, even when under memory pressure. Previously we
would return an error if we couldn't allocate a new cache entry, now
we always return the label even if we can't create a new cache entry
for it.
- Convert the sidtab atomic_t counter to a normal u32 with
READ/WRITE_ONCE() and memory barrier protection.
- A few patches to policydb.c to clean things up (remove forward
declarations, long lines, bad variable names, etc)
* tag 'selinux-pr-20190917' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
lsm: remove current_security()
selinux: fix residual uses of current_security() for the SELinux blob
selinux: avoid atomic_t usage in sidtab
fanotify, inotify, dnotify, security: add security hook for fs notifications
selinux: always return a secid from the network caches if we find one
selinux: policydb - rename type_val_to_struct_array
selinux: policydb - fix some checkpatch.pl warnings
selinux: shuffle around policydb.c to get rid of forward declarations
Previously if we couldn't find an entry in the cache and we failed to
allocate memory for a new cache entry we would fail the network object
label lookup; this is obviously not ideal. This patch fixes this so
that we return the object label even if we can't cache the object at
this point in time due to memory pressure.
The GitHub issue tracker is below:
* https://github.com/SELinuxProject/selinux-kernel/issues/3
Signed-off-by: Paul Moore <paul@paul-moore.com>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of version 2 of the gnu general public license as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 64 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141901.894819585@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace printk with pr_* to avoid checkpatch warnings.
Signed-off-by: Peter Enderborg <peter.enderborg@sony.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Define a selinux state structure (struct selinux_state) for
global SELinux state and pass it explicitly to all security server
functions. The public portion of the structure contains state
that is used throughout the SELinux code, such as the enforcing mode.
The structure also contains a pointer to a selinux_ss structure whose
definition is private to the security server and contains security
server specific state such as the policy database and SID table.
This change should have no effect on SELinux behavior or APIs
(userspace or LSM). It merely wraps SELinux state and passes it
explicitly as needed.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
[PM: minor fixups needed due to collisions with the SCTP patches]
Signed-off-by: Paul Moore <paul@paul-moore.com>
This patch removes the unused return code variable in the netport,
netnode, and netif initialization functions.
Reported-by: fengguang.wu@intel.com
Signed-off-by: Paul Moore <pmoore@redhat.com>
When flushing the AVC, such as during a policy load, the various
network caches are also flushed, with each making a call to
synchronize_net() which has shown to be expensive in some cases.
This patch consolidates the network cache flushes into a single AVC
callback which only calls synchronize_net() once for each AVC cache
flush.
Reported-by: Jaejyn Shin <flagon22bass@gmail.com>
Signed-off-by: Paul Moore <pmoore@redhat.com>
avc_add_callback now just used for registering reset functions
in initcalls, and the callback functions just did reset operations.
So, reducing the arguments to only one event is enough now.
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
My @hp.com will no longer be valid starting August 5, 2011 so an update is
necessary. My new email address is employer independent so we don't have
to worry about doing this again any time soon.
Signed-off-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The rcu callback sel_netport_free() just calls a kfree(),
so we use kfree_rcu() instead of the call_rcu(sel_netport_free).
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: James Morris <jmorris@namei.org>
Cc: Eric Paris <eparis@parisplace.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Formatting and syntax changes
whitespace, tabs to spaces, trailing space
put open { on same line as struct def
remove unneeded {} after if statements
change printk("Lu") to printk("llu")
convert asm/uaccess.h to linux/uaacess.h includes
remove unnecessary asm/bug.h includes
convert all users of simple_strtol to strict_strtol
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
The netport cache doesn't free resources in a manner which is safe or orderly.
This patch fixes this by adding in a missing call to rcu_dereference() in
sel_netport_insert() as well as some general cleanup throughout the file.
Signed-off-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: James Morris <jmorris@namei.org>
Paul Moore
Ondrej Mosnacek
lihao
Stephen Smalley
Linus Torvalds
Thomas Gleixner
peter enderborg
Paul Moore
Wanlong Gao
David Howells
Paul Moore
Lai Jiangshan
Tejun Heo
Eric Paris
James Morris