Calling 'panic()' on a kernel with CONFIG_PREEMPT=y can leave the
calling CPU in an infinite loop, but with interrupts and preemption
enabled. From this state, userspace can continue to be scheduled,
despite the system being "dead" as far as the kernel is concerned.
This is easily reproducible on arm64 when booting with "nosmp" on the
command line; a couple of shell scripts print out a periodic "Ping"
message whilst another triggers a crash by writing to
/proc/sysrq-trigger:
| sysrq: Trigger a crash
| Kernel panic - not syncing: sysrq triggered crash
| CPU: 0 PID: 1 Comm: init Not tainted 5.2.15 #1
| Hardware name: linux,dummy-virt (DT)
| Call trace:
| dump_backtrace+0x0/0x148
| show_stack+0x14/0x20
| dump_stack+0xa0/0xc4
| panic+0x140/0x32c
| sysrq_handle_reboot+0x0/0x20
| __handle_sysrq+0x124/0x190
| write_sysrq_trigger+0x64/0x88
| proc_reg_write+0x60/0xa8
| __vfs_write+0x18/0x40
| vfs_write+0xa4/0x1b8
| ksys_write+0x64/0xf0
| __arm64_sys_write+0x14/0x20
| el0_svc_common.constprop.0+0xb0/0x168
| el0_svc_handler+0x28/0x78
| el0_svc+0x8/0xc
| Kernel Offset: disabled
| CPU features: 0x0002,24002004
| Memory Limit: none
| ---[ end Kernel panic - not syncing: sysrq triggered crash ]---
| Ping 2!
| Ping 1!
| Ping 1!
| Ping 2!
The issue can also be triggered on x86 kernels if CONFIG_SMP=n,
otherwise local interrupts are disabled in 'smp_send_stop()'.
Disable preemption in 'panic()' before re-enabling interrupts.
Link: http://lkml.kernel.org/r/20191002123538.22609-1-will@kernel.org
Link: https://lore.kernel.org/r/BX1W47JXPMR8.58IYW53H6M5N@dragonstone
Signed-off-by: Will Deacon <will@kernel.org>
Reported-by: Xogium <contact@xogium.me>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In preparation for cleaning up "cut here", move the "cut here" logic up
out of __warn() and into callers that pass non-NULL args. For anyone
looking closely, there are two callers that pass NULL args: one already
explicitly prints "cut here". The remaining case is covered by how a WARN
is built, which will be cleaned up in the next patch.
Link: http://lkml.kernel.org/r/20190819234111.9019-5-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Drew Davenport <ddavenport@chromium.org>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: "Steven Rostedt (VMware)" <rostedt@goodmis.org>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "Clean up WARN() "cut here" handling", v2.
Christophe Leroy noticed that the fix for missing "cut here" in the WARN()
case was adding explicit printk() calls instead of teaching the exception
handler to add it. This refactors the bug/warn infrastructure to pass
this information as a new BUGFLAG.
Longer details repeated from the last patch in the series:
bug: move WARN_ON() "cut here" into exception handler
The original cleanup of "cut here" missed the WARN_ON() case (that does
not have a printk message), which was fixed recently by adding an explicit
printk of "cut here". This had the downside of adding a printk() to every
WARN_ON() caller, which reduces the utility of using an instruction
exception to streamline the resulting code. By making this a new BUGFLAG,
all of these can be removed and "cut here" can be handled by the exception
handler.
This was very pronounced on PowerPC, but the effect can be seen on x86 as
well. The resulting text size of a defconfig build shows some small
savings from this patch:
text data bss dec hex filename
19691167 5134320 1646664 26472151 193eed7 vmlinux.before
19676362 5134260 1663048 26473670 193f4c6 vmlinux.after
This change also opens the door for creating something like BUG_MSG(),
where a custom printk() before issuing BUG(), without confusing the "cut
here" line.
This patch (of 7):
There's no reason to have specialized helpers for passing the warn taint
down to __warn(). Consolidate and refactor helper macros, removing
__WARN_printf() and warn_slowpath_fmt_taint().
Link: http://lkml.kernel.org/r/20190819234111.9019-2-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Drew Davenport <ddavenport@chromium.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Steven Rostedt (VMware)" <rostedt@goodmis.org>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Right now kgdb/kdb hooks up to debug panics by registering for the panic
notifier. This works OK except that it means that kgdb/kdb gets called
_after_ the CPUs in the system are taken offline. That means that if
anything important was happening on those CPUs (like something that might
have contributed to the panic) you can't debug them.
Specifically I ran into a case where I got a panic because a task was
"blocked for more than 120 seconds" which was detected on CPU 2. I nicely
got shown stack traces in the kernel log for all CPUs including CPU 0,
which was running 'PID: 111 Comm: kworker/0:1H' and was in the middle of
__mmc_switch().
I then ended up at the kdb prompt where switched over to kgdb to try to
look at local variables of the process on CPU 0. I found that I couldn't.
Digging more, I found that I had no info on any tasks running on CPUs
other than CPU 2 and that asking kdb for help showed me "Error: no saved
data for this cpu". This was because all the CPUs were offline.
Let's move the entry of kdb/kgdb to a direct call from panic() and stop
using the generic notifier. Putting a direct call in allows us to order
things more properly and it also doesn't seem like we're breaking any
abstractions by calling into the debugger from the panic function.
Daniel said:
: This patch changes the way kdump and kgdb interact with each other.
: However it would seem rather odd to have both tools simultaneously armed
: and, even if they were, the user still has the option to use panic_timeout
: to force a kdump to happen. Thus I think the change of order is
: acceptable.
Link: http://lkml.kernel.org/r/20190703170354.217312-1-dianders@chromium.org
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Feng Tang <feng.tang@intel.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: "Steven Rostedt (VMware)" <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The stuff under sysctl describes /sys interface from userspace
point of view. So, add it to the admin-guide and remove the
:orphan: from its index file.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Rename the /proc/sys/ documentation files to ReST, using the
README file as a template for an index.rst, adding the other
files there via TOC markup.
Despite being written on different times with different
styles, try to make them somewhat coherent with a similar
look and feel, ensuring that they'll look nice as both
raw text file and as via the html output produced by the
Sphinx build system.
At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have EXPORT_.*_SYMBOL_GPL inside which was used in the
initial scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently on panic, kernel will lower the loglevel and print out pending
printk msg only with console_flush_on_panic().
Add an option for users to configure the "panic_print" to replay all
dmesg in buffer, some of which they may have never seen due to the
loglevel setting, which will help panic debugging .
[feng.tang@intel.com: keep the original console_flush_on_panic() inside panic()]
Link: http://lkml.kernel.org/r/1556199137-14163-1-git-send-email-feng.tang@intel.com
[feng.tang@intel.com: use logbuf lock to protect the console log index]
Link: http://lkml.kernel.org/r/1556269868-22654-1-git-send-email-feng.tang@intel.com
Link: http://lkml.kernel.org/r/1556095872-36838-1-git-send-email-feng.tang@intel.com
Signed-off-by: Feng Tang <feng.tang@intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Aaro Koskinen <aaro.koskinen@nokia.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Allow specifying reboot_mode for panic only. This is needed on systems
where ramoops is used to store panic logs, and user wants to use warm
reset to preserve those, while still having cold reset on normal
reboots.
Link: http://lkml.kernel.org/r/20190322004735.27702-1-aaro.koskinen@iki.fi
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When kernel panic happens, it will first print the panic call stack,
then the ending msg like:
[ 35.743249] ---[ end Kernel panic - not syncing: Fatal exception
[ 35.749975] ------------[ cut here ]------------
The above message are very useful for debugging.
But if system is configured to not reboot on panic, say the
"panic_timeout" parameter equals 0, it will likely print out many noisy
message like WARN() call stack for each and every CPU except the panic
one, messages like below:
WARNING: CPU: 1 PID: 280 at kernel/sched/core.c:1198 set_task_cpu+0x183/0x190
Call Trace:
<IRQ>
try_to_wake_up
default_wake_function
autoremove_wake_function
__wake_up_common
__wake_up_common_lock
__wake_up
wake_up_klogd_work_func
irq_work_run_list
irq_work_tick
update_process_times
tick_sched_timer
__hrtimer_run_queues
hrtimer_interrupt
smp_apic_timer_interrupt
apic_timer_interrupt
For people working in console mode, the screen will first show the panic
call stack, but immediately overridden by these noisy extra messages,
which makes debugging much more difficult, as the original context gets
lost on screen.
Also these noisy messages will confuse some users, as I have seen many bug
reporters posted the noisy message into bugzilla, instead of the real
panic call stack and context.
Adding a flag "suppress_printk" which gets set in panic() to avoid those
noisy messages, without changing current kernel behavior that both panic
blinking and sysrq magic key can work as is, suggested by Petr Mladek.
To verify this, make sure kernel is not configured to reboot on panic and
in console
# echo c > /proc/sysrq-trigger
to see if console only prints out the panic call stack.
Link: http://lkml.kernel.org/r/1551430186-24169-1-git-send-email-feng.tang@intel.com
Signed-off-by: Feng Tang <feng.tang@intel.com>
Suggested-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The disabled_wait() function uses its argument as the PSW address when
it stops the CPU with a wait PSW that is disabled for interrupts.
The different callers sometimes use a specific number like 0xdeadbeef
to indicate a specific failure, the early boot code uses 0 and some
other calls sites use __builtin_return_address(0).
At the time a dump is created the current PSW and the registers of a
CPU are written to lowcore to make them avaiable to the dump analysis
tool. For a CPU stopped with disabled_wait the PSW and the registers
do not really make sense together, the PSW address does not point to
the function the registers belong to.
Simplify disabled_wait() by using _THIS_IP_ for the PSW address and
drop the argument to the function.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Use DEFINE_DEBUGFS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTRIBUTE for
debugfs files.
Semantic patch information:
Rationale: DEFINE_SIMPLE_ATTRIBUTE + debugfs_create_file()
imposes some significant overhead as compared to
DEFINE_DEBUGFS_ATTRIBUTE + debugfs_create_file_unsafe().
Generated by: scripts/coccinelle/api/debugfs/debugfs_simple_attr.cocci
The _unsafe() part suggests that some of them "safeness
responsibilities" are now panic.c responsibilities. The patch is OK
since panic's clear_warn_once_fops struct file_operations is safe
against removal, so we don't have to use otherwise necessary
debugfs_file_get()/debugfs_file_put().
[sergey.senozhatsky.work@gmail.com: changelog addition]
Link: http://lkml.kernel.org/r/1545990861-158097-1-git-send-email-yuehaibing@huawei.com
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Petr Mladek <pmladek@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
So that we can also runtime chose to print out the needed system info
for panic, other than setting the kernel cmdline.
Link: http://lkml.kernel.org/r/1543398842-19295-3-git-send-email-feng.tang@intel.com
Signed-off-by: Feng Tang <feng.tang@intel.com>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kernel panic issues are always painful to debug, partially because it's
not easy to get enough information of the context when panic happens.
And we have ramoops and kdump for that, while this commit tries to
provide a easier way to show the system info by adding a cmdline
parameter, referring some idea from sysrq handler.
Link: http://lkml.kernel.org/r/1543398842-19295-2-git-send-email-feng.tang@intel.com
Signed-off-by: Feng Tang <feng.tang@intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABAgAGBQJcG5XBAAoJEFKgDEdIgJTyoV8QAJGJtlSLXJewMaJyLom8fb2I
YvdNo2gq+uLeNAwNoOio/pcMZypfjoISYq7T4etfElXay42c7MgZftMoo/cmtlhs
FU9WUVYUXWLuaMgibP7nl9fsNUtRt/ySY7PfOj3nu6A/E4dqqNWnoC7V9rLp2h70
Np7L1JEnUr0daRhY6sBm2V6VwQKxjXHY/sdC3xw88R8CVA1wMAxCxouz8qHopvn3
4Anfhu4o6e4PGCw8YxFIwKS7K5MtDP/WESOF/80/EB+tZkJzH63B3ozqxMirlHMt
zilw6FPwZRX1NRJ1gDJJmZjt0rwC9oCr0u93QUdUx9j179THs8TBf3DaJEIx87zZ
fwy+PpN+8OXnS+6qAQOhSaMtms6pPE73Kr2vTukvNmhEoHc0lGIXbKQeWdVl248a
y9nTlJiOCEiA/nssNGpUVM7uncziKOmJOoQfyaSI9OOo/u3tAwZXrAe7f3GPKeWo
o6RaIKfTx1LJhco1vxbc93pKCK4ItXU0aQxjRbpBBRjhlFJG8C8alKRagx4LXRpe
5bFd7L+amtN6BzpeI1uGMKEeRBwn0zjlPrc12bTe6MjiRLr3wtthspELY2ubcIxk
ghe7ARzb05X9O206EkF6Mir/fn3oudrouuAGyJjNQyAi/OjijRB92l7dLkn/Pe1o
hNTPMDU/po0y3ulDwaVx
=FeVC
-----END PGP SIGNATURE-----
Merge tag 'printk-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk
Pull printk updates from Petr Mladek:
- Keep spinlocks busted until the end of panic()
- Fix races between calculating number of messages that would fit into
user space buffers, filling the buffers, and switching printk.time
parameter
- Some code clean up
* tag 'printk-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
printk: Remove print_prefix() calls with NULL buffer.
printk: fix printk_time race.
printk: Make printk_emit() local function.
panic: avoid deadlocks in re-entrant console drivers
From printk()/serial console point of view panic() is special, because
it may force CPU to re-enter printk() or/and serial console driver.
Therefore, some of serial consoles drivers are re-entrant. E.g. 8250:
serial8250_console_write()
{
if (port->sysrq)
locked = 0;
else if (oops_in_progress)
locked = spin_trylock_irqsave(&port->lock, flags);
else
spin_lock_irqsave(&port->lock, flags);
...
}
panic() does set oops_in_progress via bust_spinlocks(1), so in theory
we should be able to re-enter serial console driver from panic():
CPU0
<NMI>
uart_console_write()
serial8250_console_write() // if (oops_in_progress)
// spin_trylock_irqsave()
call_console_drivers()
console_unlock()
console_flush_on_panic()
bust_spinlocks(1) // oops_in_progress++
panic()
<NMI/>
spin_lock_irqsave(&port->lock, flags) // spin_lock_irqsave()
serial8250_console_write()
call_console_drivers()
console_unlock()
printk()
...
However, this does not happen and we deadlock in serial console on
port->lock spinlock. And the problem is that console_flush_on_panic()
called after bust_spinlocks(0):
void panic(const char *fmt, ...)
{
bust_spinlocks(1);
...
bust_spinlocks(0);
console_flush_on_panic();
...
}
bust_spinlocks(0) decrements oops_in_progress, so oops_in_progress
can go back to zero. Thus even re-entrant console drivers will simply
spin on port->lock spinlock. Given that port->lock may already be
locked either by a stopped CPU, or by the very same CPU we execute
panic() on (for instance, NMI panic() on printing CPU) the system
deadlocks and does not reboot.
Fix this by removing bust_spinlocks(0), so oops_in_progress is always
set in panic() now and, thus, re-entrant console drivers will trylock
the port->lock instead of spinning on it forever, when we call them
from console_flush_on_panic().
Link: http://lkml.kernel.org/r/20181025101036.6823-1-sergey.senozhatsky@gmail.com
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Daniel Wang <wonderfly@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Peter Feiner <pfeiner@google.com>
Cc: linux-serial@vger.kernel.org
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
If a call to panic() terminates the string with a \n , the result puts the
closing brace ']---' on a newline because panic() itself adds \n too.
Now, if one goes and removes the newline chars from all panic()
invocations - and the stats right now look like this:
~300 calls with a \n
~500 calls without a \n
one is destined to a neverending game of whack-a-mole because the usual
thing to do is add a newline at the end of a string a function is supposed
to print.
Therefore, simply zap any \n at the end of the panic string to avoid
touching so many places in the kernel.
Link: http://lkml.kernel.org/r/20181009205019.2786-1-bp@alien8.de
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The changes to automatically test for working stack protector compiler
support in the Kconfig files removed the special STACKPROTECTOR_AUTO
option that picked the strongest stack protector that the compiler
supported.
That was all a nice cleanup - it makes no sense to have the AUTO case
now that the Kconfig phase can just determine the compiler support
directly.
HOWEVER.
It also meant that doing "make oldconfig" would now _disable_ the strong
stackprotector if you had AUTO enabled, because in a legacy config file,
the sane stack protector configuration would look like
CONFIG_HAVE_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR_NONE is not set
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_CC_STACKPROTECTOR_AUTO=y
and when you ran this through "make oldconfig" with the Kbuild changes,
it would ask you about the regular CONFIG_CC_STACKPROTECTOR (that had
been renamed from CONFIG_CC_STACKPROTECTOR_REGULAR to just
CONFIG_CC_STACKPROTECTOR), but it would think that the STRONG version
used to be disabled (because it was really enabled by AUTO), and would
disable it in the new config, resulting in:
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y
That's dangerously subtle - people could suddenly find themselves with
the weaker stack protector setup without even realizing.
The solution here is to just rename not just the old RECULAR stack
protector option, but also the strong one. This does that by just
removing the CC_ prefix entirely for the user choices, because it really
is not about the compiler support (the compiler support now instead
automatially impacts _visibility_ of the options to users).
This results in "make oldconfig" actually asking the user for their
choice, so that we don't have any silent subtle security model changes.
The end result would generally look like this:
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y
where the "CC_" versions really are about internal compiler
infrastructure, not the user selections.
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since the randstruct plugin can intentionally produce extremely unusual
kernel structure layouts (even performance pathological ones), some
maintainers want to be able to trivially determine if an Oops is coming
from a randstruct-built kernel, so as to keep their sanity when
debugging. This adds the new flag and initializes taint_mask
immediately when built with randstruct.
Link: http://lkml.kernel.org/r/1519084390-43867-4-git-send-email-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This consolidates the taint bit documentation into a single place with
both numeric and letter values. Additionally adds the missing TAINT_AUX
documentation.
Link: http://lkml.kernel.org/r/1519084390-43867-3-git-send-email-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This converts to using indexed initializers instead of comments, adds a
comment on why the taint flags can't be an enum, and make sure that no
one forgets to update the taint_flags when adding new bits.
Link: http://lkml.kernel.org/r/1519084390-43867-2-git-send-email-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Tom Zanussi's extended histogram work
This adds the synthetic events to have histograms from multiple event data
Adds triggers "onmatch" and "onmax" to call the synthetic events
Several updates to the histogram code from this
- Allow way to nest ring buffer calls in the same context
- Allow absolute time stamps in ring buffer
- Rewrite of filter code parsing based on Al Viro's suggestions
- Setting of trace_clock to global if TSC is unstable (on boot)
- Better OOM handling when allocating large ring buffers
- Added initcall tracepoints (consolidated initcall_debug code with them)
And other various fixes and clean ups
-----BEGIN PGP SIGNATURE-----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=91oN
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"New features:
- Tom Zanussi's extended histogram work.
This adds the synthetic events to have histograms from multiple
event data Adds triggers "onmatch" and "onmax" to call the
synthetic events Several updates to the histogram code from this
- Allow way to nest ring buffer calls in the same context
- Allow absolute time stamps in ring buffer
- Rewrite of filter code parsing based on Al Viro's suggestions
- Setting of trace_clock to global if TSC is unstable (on boot)
- Better OOM handling when allocating large ring buffers
- Added initcall tracepoints (consolidated initcall_debug code with
them)
And other various fixes and clean ups"
* tag 'trace-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (68 commits)
init: Have initcall_debug still work without CONFIG_TRACEPOINTS
init, tracing: Have printk come through the trace events for initcall_debug
init, tracing: instrument security and console initcall trace events
init, tracing: Add initcall trace events
tracing: Add rcu dereference annotation for test func that touches filter->prog
tracing: Add rcu dereference annotation for filter->prog
tracing: Fixup logic inversion on setting trace_global_clock defaults
tracing: Hide global trace clock from lockdep
ring-buffer: Add set/clear_current_oom_origin() during allocations
ring-buffer: Check if memory is available before allocation
lockdep: Add print_irqtrace_events() to __warn
vsprintf: Do not preprocess non-dereferenced pointers for bprintf (%px and %pK)
tracing: Uninitialized variable in create_tracing_map_fields()
tracing: Make sure variable string fields are NULL-terminated
tracing: Add action comparisons when testing matching hist triggers
tracing: Don't add flag strings when displaying variable references
tracing: Fix display of hist trigger expressions containing timestamps
ftrace: Drop a VLA in module_exists()
tracing: Mention trace_clock=global when warning about unstable clocks
tracing: Default to using trace_global_clock if sched_clock is unstable
...
Running a test on a x86_32 kernel I triggered a bug that an interrupt
disable/enable isn't being catched by lockdep. At least knowing where the
last one was found would be helpful, but the warnings that are produced do
not show this information. Even without debugging lockdep, having the WARN()
display the last place hard and soft irqs were enabled or disabled is
valuable.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The BUG and stack protector reports were still using a raw %p. This
changes it to %pB for more meaningful output.
Link: http://lkml.kernel.org/r/20180301225704.GA34198@beast
Fixes: ad67b74d24 ("printk: hash addresses printed with %p")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Richard Weinberger <richard.weinberger@gmail.com>,
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the gist of a patch which we've been forward-porting in our
kernels for a long time now and it probably would make a good sense to
have such TAINT_AUX flag upstream which can be used by each distro etc,
how they see fit. This way, we won't need to forward-port a distro-only
version indefinitely.
Add an auxiliary taint flag to be used by distros and others. This
obviates the need to forward-port whatever internal solutions people
have in favor of a single flag which they can map arbitrarily to a
definition of their pleasing.
The "X" mnemonic could also mean eXternal, which would be taint from a
distro or something else but not the upstream kernel. We will use it to
mark modules for which we don't provide support. I.e., a really
eXternal module.
Link: http://lkml.kernel.org/r/20170911134533.dp5mtyku5bongx4c@pd.tnic
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Jessica Yu <jeyu@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Prior to v4.11, x86 used warn_slowpath_fmt() for handling WARN()s.
After WARN() was moved to using UD0 on x86, the warning text started
appearing _before_ the "cut here" line. This appears to have been a
long-standing bug on architectures that used __WARN_TAINT, but it didn't
get fixed.
v4.11 and earlier on x86:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 2956 at drivers/misc/lkdtm_bugs.c:65 lkdtm_WARNING+0x21/0x30
This is a warning message
Modules linked in:
v4.12 and later on x86:
This is a warning message
------------[ cut here ]------------
WARNING: CPU: 1 PID: 2982 at drivers/misc/lkdtm_bugs.c:68 lkdtm_WARNING+0x15/0x20
Modules linked in:
With this fix:
------------[ cut here ]------------
This is a warning message
WARNING: CPU: 3 PID: 3009 at drivers/misc/lkdtm_bugs.c:67 lkdtm_WARNING+0x15/0x20
Since the __FILE__ reporting happens as part of the UD0 handler, it
isn't trivial to move the message to after the WARNING line, but at
least we can fix the position of the "cut here" line so all the various
logging tools will start including the actual runtime warning message
again, when they follow the instruction and "cut here".
Link: http://lkml.kernel.org/r/1510100869-73751-4-git-send-email-keescook@chromium.org
Fixes: 9a93848fe7 ("x86/debug: Implement __WARN() using UD0")
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The "cut here" string is used in a few paths. Define it in a single
place.
Link: http://lkml.kernel.org/r/1510100869-73751-3-git-send-email-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some architectures store the WARN_ONCE state in the flags field of the
bug_entry. Clear that one too when resetting once state through
/sys/kernel/debug/clear_warn_once
Pointed out by Michael Ellerman
Improves the earlier patch that add clear_warn_once.
[ak@linux.intel.com: add a missing ifdef CONFIG_MODULES]
Link: http://lkml.kernel.org/r/20171020170633.9593-1-andi@firstfloor.org
[akpm@linux-foundation.org: fix unused var warning]
[akpm@linux-foundation.org: Use 0200 for clear_warn_once file, per mpe]
[akpm@linux-foundation.org: clear BUGFLAG_DONE in clear_once_table(), per mpe]
Link: http://lkml.kernel.org/r/20171019204642.7404-1-andi@firstfloor.org
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I like _ONCE warnings because it's guaranteed that they don't flood the
log.
During testing I find it useful to reset the state of the once warnings,
so that I can rerun tests and see if they trigger again, or can
guarantee that a test run always hits the same warnings.
This patch adds a debugfs interface to reset all the _ONCE warnings so
that they appear again:
echo 1 > /sys/kernel/debug/clear_warn_once
This is implemented by putting all the warning booleans into a special
section, and clearing it.
[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/20171017221455.6740-1-andi@firstfloor.org
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This implements refcount_t overflow protection on x86 without a noticeable
performance impact, though without the fuller checking of REFCOUNT_FULL.
This is done by duplicating the existing atomic_t refcount implementation
but with normally a single instruction added to detect if the refcount
has gone negative (e.g. wrapped past INT_MAX or below zero). When detected,
the handler saturates the refcount_t to INT_MIN / 2. With this overflow
protection, the erroneous reference release that would follow a wrap back
to zero is blocked from happening, avoiding the class of refcount-overflow
use-after-free vulnerabilities entirely.
Only the overflow case of refcounting can be perfectly protected, since
it can be detected and stopped before the reference is freed and left to
be abused by an attacker. There isn't a way to block early decrements,
and while REFCOUNT_FULL stops increment-from-zero cases (which would
be the state _after_ an early decrement and stops potential double-free
conditions), this fast implementation does not, since it would require
the more expensive cmpxchg loops. Since the overflow case is much more
common (e.g. missing a "put" during an error path), this protection
provides real-world protection. For example, the two public refcount
overflow use-after-free exploits published in 2016 would have been
rendered unexploitable:
http://perception-point.io/2016/01/14/analysis-and-exploitation-of-a-linux-kernel-vulnerability-cve-2016-0728/http://cyseclabs.com/page?n=02012016
This implementation does, however, notice an unchecked decrement to zero
(i.e. caller used refcount_dec() instead of refcount_dec_and_test() and it
resulted in a zero). Decrements under zero are noticed (since they will
have resulted in a negative value), though this only indicates that a
use-after-free may have already happened. Such notifications are likely
avoidable by an attacker that has already exploited a use-after-free
vulnerability, but it's better to have them reported than allow such
conditions to remain universally silent.
On first overflow detection, the refcount value is reset to INT_MIN / 2
(which serves as a saturation value) and a report and stack trace are
produced. When operations detect only negative value results (such as
changing an already saturated value), saturation still happens but no
notification is performed (since the value was already saturated).
On the matter of races, since the entire range beyond INT_MAX but before
0 is negative, every operation at INT_MIN / 2 will trap, leaving no
overflow-only race condition.
As for performance, this implementation adds a single "js" instruction
to the regular execution flow of a copy of the standard atomic_t refcount
operations. (The non-"and_test" refcount_dec() function, which is uncommon
in regular refcount design patterns, has an additional "jz" instruction
to detect reaching exactly zero.) Since this is a forward jump, it is by
default the non-predicted path, which will be reinforced by dynamic branch
prediction. The result is this protection having virtually no measurable
change in performance over standard atomic_t operations. The error path,
located in .text.unlikely, saves the refcount location and then uses UD0
to fire a refcount exception handler, which resets the refcount, handles
reporting, and returns to regular execution. This keeps the changes to
.text size minimal, avoiding return jumps and open-coded calls to the
error reporting routine.
Example assembly comparison:
refcount_inc() before:
.text:
ffffffff81546149: f0 ff 45 f4 lock incl -0xc(%rbp)
refcount_inc() after:
.text:
ffffffff81546149: f0 ff 45 f4 lock incl -0xc(%rbp)
ffffffff8154614d: 0f 88 80 d5 17 00 js ffffffff816c36d3
...
.text.unlikely:
ffffffff816c36d3: 48 8d 4d f4 lea -0xc(%rbp),%rcx
ffffffff816c36d7: 0f ff (bad)
These are the cycle counts comparing a loop of refcount_inc() from 1
to INT_MAX and back down to 0 (via refcount_dec_and_test()), between
unprotected refcount_t (atomic_t), fully protected REFCOUNT_FULL
(refcount_t-full), and this overflow-protected refcount (refcount_t-fast):
2147483646 refcount_inc()s and 2147483647 refcount_dec_and_test()s:
cycles protections
atomic_t 82249267387 none
refcount_t-fast 82211446892 overflow, untested dec-to-zero
refcount_t-full 144814735193 overflow, untested dec-to-zero, inc-from-zero
This code is a modified version of the x86 PAX_REFCOUNT atomic_t
overflow defense from the last public patch of PaX/grsecurity, based
on my understanding of the code. Changes or omissions from the original
code are mine and don't reflect the original grsecurity/PaX code. Thanks
to PaX Team for various suggestions for improvement for repurposing this
code to be a refcount-only protection.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Elena Reshetova <elena.reshetova@intel.com>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Hans Liljestrand <ishkamiel@gmail.com>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Cc: Jann Horn <jannh@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Serge E. Hallyn <serge@hallyn.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: arozansk@redhat.com
Cc: axboe@kernel.dk
Cc: kernel-hardening@lists.openwall.com
Cc: linux-arch <linux-arch@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170815161924.GA133115@beast
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We are going to split <linux/sched/debug.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.
Create a trivial placeholder <linux/sched/debug.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now we can also jump to boot prom from sunhv console by sending
break twice on console for both running and panicked kernel
cases.
Signed-off-by: Vijay Kumar <vijay.ac.kumar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull printk updates from Petr Mladek:
- Add Petr Mladek, Sergey Senozhatsky as printk maintainers, and Steven
Rostedt as the printk reviewer. This idea came up after the
discussion about printk issues at Kernel Summit. It was formulated
and discussed at lkml[1].
- Extend a lock-less NMI per-cpu buffers idea to handle recursive
printk() calls by Sergey Senozhatsky[2]. It is the first step in
sanitizing printk as discussed at Kernel Summit.
The change allows to see messages that would normally get ignored or
would cause a deadlock.
Also it allows to enable lockdep in printk(). This already paid off.
The testing in linux-next helped to discover two old problems that
were hidden before[3][4].
- Remove unused parameter by Sergey Senozhatsky. Clean up after a past
change.
[1] http://lkml.kernel.org/r/1481798878-31898-1-git-send-email-pmladek@suse.com
[2] http://lkml.kernel.org/r/20161227141611.940-1-sergey.senozhatsky@gmail.com
[3] http://lkml.kernel.org/r/20170215044332.30449-1-sergey.senozhatsky@gmail.com
[4] http://lkml.kernel.org/r/20170217015932.11898-1-sergey.senozhatsky@gmail.com
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
printk: drop call_console_drivers() unused param
printk: convert the rest to printk-safe
printk: remove zap_locks() function
printk: use printk_safe buffers in printk
printk: report lost messages in printk safe/nmi contexts
printk: always use deferred printk when flush printk_safe lines
printk: introduce per-cpu safe_print seq buffer
printk: rename nmi.c and exported api
printk: use vprintk_func in vprintk()
MAINTAINERS: Add printk maintainers
A preparation patch for printk_safe work. No functional change.
- rename nmi.c to print_safe.c
- add `printk_safe' prefix to some (which used both by printk-safe
and printk-nmi) of the exported functions.
Link: http://lkml.kernel.org/r/20161227141611.940-3-sergey.senozhatsky@gmail.com
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Calvin Owens <calvinowens@fb.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
When a system panics, the "Rebooting in X seconds.." message is never
printed because it lacks a new line. Fix it.
Link: http://lkml.kernel.org/r/20170119114751.2724-1-jslaby@suse.cz
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 7fd8329ba5 ("taint/module: Clean up global and module taint
flags handling") used the key words true and false as character members
of a new struct. These names cause problems when out-of-kernel modules
such as VirtualBox include their own definitions of true and false.
Fixes: 7fd8329ba5 ("taint/module: Clean up global and module taint flags handling")
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Jessica Yu <jeyu@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Reported-by: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jessica Yu <jeyu@redhat.com>
The commit 66cc69e34e ("Fix: module signature vs tracepoints:
add new TAINT_UNSIGNED_MODULE") updated module_taint_flags() to
potentially print one more character. But it did not increase the
size of the corresponding buffers in m_show() and print_modules().
We have recently done the same mistake when adding a taint flag
for livepatching, see
https://lkml.kernel.org/r/cfba2c823bb984690b73572aaae1db596b54a082.1472137475.git.jpoimboe@redhat.com
Also struct module uses an incompatible type for mod-taints flags.
It survived from the commit 2bc2d61a96 ("[PATCH] list module
taint flags in Oops/panic"). There was used "int" for the global taint
flags at these times. But only the global tain flags was later changed
to "unsigned long" by the commit 25ddbb18aa ("Make the taint
flags reliable").
This patch defines TAINT_FLAGS_COUNT that can be used to create
arrays and buffers of the right size. Note that we could not use
enum because the taint flag indexes are used also in assembly code.
Then it reworks the table that describes the taint flags. The TAINT_*
numbers can be used as the index. Instead, we add information
if the taint flag is also shown per-module.
Finally, it uses "unsigned long", bit operations, and the updated
taint_flags table also for mod->taints.
It is not optimal because only few taint flags can be printed by
module_taint_flags(). But better be on the safe side. IMHO, it is
not worth the optimization and this is a good compromise.
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: http://lkml.kernel.org/r/1474458442-21581-1-git-send-email-pmladek@suse.com
[jeyu@redhat.com: fix broken lkml link in changelog]
Signed-off-by: Jessica Yu <jeyu@redhat.com>
Daniel Walker reported problems which happens when
crash_kexec_post_notifiers kernel option is enabled
(https://lkml.org/lkml/2015/6/24/44).
In that case, smp_send_stop() is called before entering kdump routines
which assume other CPUs are still online. As the result, for x86, kdump
routines fail to save other CPUs' registers and disable virtualization
extensions.
To fix this problem, call a new kdump friendly function,
crash_smp_send_stop(), instead of the smp_send_stop() when
crash_kexec_post_notifiers is enabled. crash_smp_send_stop() is a weak
function, and it just call smp_send_stop(). Architecture codes should
override it so that kdump can work appropriately. This patch only
provides x86-specific version.
For Xen's PV kernel, just keep the current behavior.
NOTES:
- Right solution would be to place crash_smp_send_stop() before
__crash_kexec() invocation in all cases and remove smp_send_stop(), but
we can't do that until all architectures implement own
crash_smp_send_stop()
- crash_smp_send_stop()-like work is still needed by
machine_crash_shutdown() because crash_kexec() can be called without
entering panic()
Fixes: f06e5153f4 (kernel/panic.c: add "crash_kexec_post_notifiers" option)
Link: http://lkml.kernel.org/r/20160810080948.11028.15344.stgit@sysi4-13.yrl.intra.hitachi.co.jp
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Reported-by: Daniel Walker <dwalker@fifo99.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Daniel Walker <dwalker@fifo99.com>
Cc: Xunlei Pang <xpang@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Daney <david.daney@cavium.com>
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: "Steven J. Hill" <steven.hill@cavium.com>
Cc: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
crash_kexec_post_notifiers ia a boot option which controls whether the
1st kernel calls panic notifiers or not before booting the 2nd kernel.
However, there is no need to limit it to being modifiable only at boot
time. So, use core_param instead of early_param.
Link: http://lkml.kernel.org/r/20160705113327.5864.43139.stgit@softrs
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In NMI context, printk() messages are stored into per-CPU buffers to
avoid a possible deadlock. They are normally flushed to the main ring
buffer via an IRQ work. But the work is never called when the system
calls panic() in the very same NMI handler.
This patch tries to flush NMI buffers before the crash dump is
generated. In this case it does not risk a double release and bails out
when the logbuf_lock is already taken. The aim is to get the messages
into the main ring buffer when possible. It makes them better
accessible in the vmcore.
Then the patch tries to flush the buffers second time when other CPUs
are down. It might be more aggressive and reset logbuf_lock. The aim
is to get the messages available for the consequent kmsg_dump() and
console_flush_on_panic() calls.
The patch causes vprintk_emit() to be called even in NMI context again.
But it is done via printk_deferred() so that the console handling is
skipped. Consoles use internal locks and we could not prevent a
deadlock easily. They are explicitly called later when the crash dump
is not generated, see console_flush_on_panic().
Signed-off-by: Petr Mladek <pmladek@suse.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: David Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jiri Kosina <jkosina@suse.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 1717f2096b ("panic, x86: Fix re-entrance problem due to panic
on NMI") and commit 58c5661f21 ("panic, x86: Allow CPUs to save
registers even if looping in NMI context") introduced nmi_panic() which
prevents concurrent/recursive execution of panic(). It also saves
registers for the crash dump on x86.
However, there are some cases where NMI handlers still use panic().
This patch set partially replaces them with nmi_panic() in those cases.
Even this patchset is applied, some NMI or similar handlers (e.g. MCE
handler) continue to use panic(). This is because I can't test them
well and actual problems won't happen. For example, the possibility
that normal panic and panic on MCE happen simultaneously is very low.
This patch (of 3):
Convert nmi_panic() to a proper function and export it instead of
exporting internal implementation details to modules, for obvious
reasons.
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Cc: Javi Merino <javi.merino@arm.com>
Cc: Gobinda Charan Maji <gobinda.cemk07@gmail.com>
Cc: "Steven Rostedt (Red Hat)" <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The traceoff_on_warning option doesn't have any effect on s390, powerpc,
arm64, parisc, and sh because there are two different types of WARN
implementations:
1) The above mentioned architectures treat WARN() as a special case of a
BUG() exception. They handle warnings in report_bug() in lib/bug.c.
2) All other architectures just call warn_slowpath_*() directly. Their
warnings are handled in warn_slowpath_common() in kernel/panic.c.
Support traceoff_on_warning on all architectures and prevent any future
divergence by using a single common function to emit the warning.
Also remove the '()' from '%pS()', because the parentheses look funky:
[ 45.607629] WARNING: at /root/warn_mod/warn_mod.c:17 .init_dummy+0x20/0x40 [warn_mod]()
Reported-by: Chunyu Hu <chuhu@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Acked-by: Prarit Bhargava <prarit@redhat.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
@console_may_schedule tracks whether console_sem was acquired through
lock or trylock. If the former, we're inside a sleepable context and
console_conditional_schedule() performs cond_resched(). This allows
console drivers which use console_lock for synchronization to yield
while performing time-consuming operations such as scrolling.
However, the actual console outputting is performed while holding
irq-safe logbuf_lock, so console_unlock() clears @console_may_schedule
before starting outputting lines. Also, only a few drivers call
console_conditional_schedule() to begin with. This means that when a
lot of lines need to be output by console_unlock(), for example on a
console registration, the task doing console_unlock() may not yield for
a long time on a non-preemptible kernel.
If this happens with a slow console devices, for example a serial
console, the outputting task may occupy the cpu for a very long time.
Long enough to trigger softlockup and/or RCU stall warnings, which in
turn pile more messages, sometimes enough to trigger the next cycle of
warnings incapacitating the system.
Fix it by making console_unlock() insert cond_resched() between lines if
@console_may_schedule.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Calvin Owens <calvinowens@fb.com>
Acked-by: Jan Kara <jack@suse.com>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Kyle McMartin <kyle@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, panic() and crash_kexec() can be called at the same time.
For example (x86 case):
CPU 0:
oops_end()
crash_kexec()
mutex_trylock() // acquired
nmi_shootdown_cpus() // stop other CPUs
CPU 1:
panic()
crash_kexec()
mutex_trylock() // failed to acquire
smp_send_stop() // stop other CPUs
infinite loop
If CPU 1 calls smp_send_stop() before nmi_shootdown_cpus(), kdump
fails.
In another case:
CPU 0:
oops_end()
crash_kexec()
mutex_trylock() // acquired
<NMI>
io_check_error()
panic()
crash_kexec()
mutex_trylock() // failed to acquire
infinite loop
Clearly, this is an undesirable result.
To fix this problem, this patch changes crash_kexec() to exclude others
by using the panic_cpu atomic.
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: kexec@lists.infradead.org
Cc: linux-doc@vger.kernel.org
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Minfei Huang <mnfhuang@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: x86-ml <x86@kernel.org>
Link: http://lkml.kernel.org/r/20151210014630.25437.94161.stgit@softrs
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Will Deacon
Kees Cook
Douglas Anderson
Mauro Carvalho Chehab
Thomas Gleixner
Feng Tang
Aaro Koskinen
Martin Schwidefsky
YueHaibing
Linus Torvalds
Sergey Senozhatsky
Borislav Petkov
Steven Rostedt (VMware)
Andi Kleen
Ingo Molnar
Vijay Kumar
Sergey Senozhatsky
Jiri Slaby
Larry Finger
Petr Mladek
Hidehiro Kawai
Josh Poimboeuf
Tejun Heo