Граф коммитов

152 Коммитов

Автор SHA1 Сообщение Дата
Linus Torvalds a5b871c91d dmaengine updates for v5.6-rc1
- Core:
    - Support for dynamic channels
    - Removal of various slave wrappers
    - Make few slave request APIs as private to dmaengine
    - Symlinks between channels and slaves
    - Support for hotplug of controllers
    - Support for metadata_ops for dma_async_tx_descriptor
    - Reporting DMA cached data amount
    - Virtual dma channel locking updates
 
  - New drivers/device/feature support support:
    - Driver for Intel data accelerators
    - Driver for TI K3 UDMA
    - Driver for PLX DMA engine
    - Driver for hisilicon Kunpeng DMA engine
    - Support for eDMA support for QorIQ LS1028A in fsl edma driver
    - Support for cyclic dma in sun4i driver
    - Support for X1830 in JZ4780 driver
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAl4u+QkACgkQfBQHDyUj
 g0cCcg//awBruofTHIrBOwHmCX1a09mw5WmkFG48N7tYp4fvaI1aOgs3hH9PZiBG
 fFZUktodwYpEKg6JJOfm1RnLBuKm0+3zmaKGPdK1RcbaDURh8G9qhW65f4mfImvB
 GXlgw59WKtgPAM9zWW9UxjugAk4DBte5xVKYJUsI0t4P7k9TM4i0Fv0VmMUhhDuo
 buPD1cM/GWFHbE7OYJ51aGRtrOHV1nPgQaHBkWaT7EotzGsZ3gtWYzteI3BRXRV/
 IkSgxOefMkIgu1j3KIxFZ1CJDHCZSnx2B+AEMCcp63osyeHBOYoL7KQxo6tBjaRV
 fbCasbkTkvvJUjyZdtOdU2wqf7ZqoDkD+n5nkpENf4G1M8J5RiHmrFq96m3HRonE
 V1bmMslXhsJlvtoT6ec2iJFchiq0nx1XHyST6faUOK+0cd1lzbogWwztydQH4fwd
 TxfEd+eYlFFu3lGDfRp14Tz7fAcFNPZ2bJQhZkF6RpwUW3y3L0cJc3Y0AcWmNkvJ
 oStvTlbbUvgRgO7rvEyAmdPb31lE6PLaA0WCahcvf4zQxxNMyYyaWP73MegvqJGO
 pfJXBOWBTTKwu0fDR5UHJd3tEDABvcZnwBaCSYrpI5f9bJ4NRI3f4DIMwLBnw9IK
 aH6pzwo4gTAMuvxzq8KeTp3hU7kszyUN8q8hiTZlgVozMLKXhQY=
 =mv1v
 -----END PGP SIGNATURE-----

Merge tag 'dmaengine-5.6-rc1' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine updates from Vinod Koul:
 "This time we have a bunch of core changes to support dynamic channels,
  hotplug of controllers, new apis for metadata ops etc along with new
  drivers for Intel data accelerators, TI K3 UDMA, PLX DMA engine and
  hisilicon Kunpeng DMA engine. Also usual assorted updates to drivers.

  Core:
   - Support for dynamic channels
   - Removal of various slave wrappers
   - Make few slave request APIs as private to dmaengine
   - Symlinks between channels and slaves
   - Support for hotplug of controllers
   - Support for metadata_ops for dma_async_tx_descriptor
   - Reporting DMA cached data amount
   - Virtual dma channel locking updates

  New drivers/device/feature support support:
   - Driver for Intel data accelerators
   - Driver for TI K3 UDMA
   - Driver for PLX DMA engine
   - Driver for hisilicon Kunpeng DMA engine
   - Support for eDMA support for QorIQ LS1028A in fsl edma driver
   - Support for cyclic dma in sun4i driver
   - Support for X1830 in JZ4780 driver"

* tag 'dmaengine-5.6-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (62 commits)
  dmaengine: Create symlinks between DMA channels and slaves
  dmaengine: hisilicon: Add Kunpeng DMA engine support
  dmaengine: idxd: add char driver to expose submission portal to userland
  dmaengine: idxd: connect idxd to dmaengine subsystem
  dmaengine: idxd: add descriptor manipulation routines
  dmaengine: idxd: add sysfs ABI for idxd driver
  dmaengine: idxd: add configuration component of driver
  dmaengine: idxd: Init and probe for Intel data accelerators
  dmaengine: add support to dynamic register/unregister of channels
  dmaengine: break out channel registration
  x86/asm: add iosubmit_cmds512() based on MOVDIR64B CPU instruction
  dmaengine: ti: k3-udma: fix spelling mistake "limted" -> "limited"
  dmaengine: s3c24xx-dma: fix spelling mistake "to" -> "too"
  dmaengine: Move dma_get_{,any_}slave_channel() to private dmaengine.h
  dmaengine: Remove dma_request_slave_channel_compat() wrapper
  dmaengine: Remove dma_device_satisfies_mask() wrapper
  dt-bindings: fsl-imx-sdma: Add i.MX8MM/i.MX8MN/i.MX8MP compatible string
  dmaengine: zynqmp_dma: fix burst length configuration
  dmaengine: sun4i: Add support for cyclic requests with dedicated DMA
  dmaengine: fsl-qdma: fix duplicated argument to &&
  ...
2020-01-27 10:55:50 -08:00
Linus Torvalds 08c49dc135 platform-drivers-x86 for v5.6-1
* Enable thermal policy for ASUS TUF FX705DY/FX505DY
 * Support left round button on ASUS N56VB
 * Support new Mellanox platforms of basic class VMOD0009 and VMOD0010
 * Intel Comet Lake, Tiger Lake and Elkhart Lake support in the PMC driver
 * Big clean up to Intel PMC core, PMC IPC and SCU IPC drivers
 * Touchscreen support for the PiPO W11 tablet
 
 The following is an automated git shortlog grouped by driver:
 
 asus-nb-wmi:
  -  Support left round button on N56VB
 
 asus-wmi:
  -  Fix keyboard brightness cannot be set to 0
  -  Set throttle thermal policy to default
  -  Support throttle thermal policy
 
 Documentation/ABI:
  -  Add new attribute for mlxreg-io sysfs interfaces
  -  Style changes
  -  Add missed attribute for mlxreg-io sysfs interfaces
  -  Fix documentation inconsistency for mlxreg-io sysfs interfaces
 
 GPD pocket fan:
  -  Allow somewhat lower/higher temperature limits
  -  Use default values when wrong modparams are given
 
 intel_atomisp2_pm:
  -  Spelling fixes
  -  Refactor timeout loop
 
 intel_mid_powerbtn:
  -  Take a copy of ddata
 
 intel_pmc_core:
  -  update Comet Lake platform driver
  -  Fix spelling of MHz unit
  -  Fix indentation in function definitions
  -  Put more stuff under #ifdef DEBUG_FS
  -  Respect error code of kstrtou32_from_user()
  -  Add Intel Elkhart Lake support
  -  Add Intel Tiger Lake support
  -  Make debugfs entry for pch_ip_power_gating_status conditional
  -  Create platform dependent bitmap structs
  -  Remove unnecessary assignments
  -  Clean up: Remove comma after the termination line
 
 intel_pmc_ipc:
  -  Switch to use driver->dev_groups
  -  Propagate error from kstrtoul()
  -  Use octal permissions in sysfs attributes
  -  Get rid of unnecessary includes
  -  Drop ipc_data_readb()
  -  Drop intel_pmc_gcr_read() and intel_pmc_gcr_write()
  -  Make intel_pmc_ipc_raw_cmd() static
  -  Make intel_pmc_ipc_simple_command() static
  -  Make intel_pmc_gcr_update() static
 
 intel_scu_ipc:
  -  Reformat kernel-doc comments of exported functions
  -  Drop intel_scu_ipc_raw_command()
  -  Drop intel_scu_ipc_io[read|write][8|16]()
  -  Drop unused macros
  -  Drop unused prototype intel_scu_ipc_fw_update()
  -  Sleeping is fine when polling
  -  Drop intel_scu_ipc_i2c_cntrl()
  -  Remove Lincroft support
  -  Add constants for register offsets
  -  Fix interrupt support
 
 intel_scu_ipcutil:
  -  Remove default y from Kconfig
 
 intel_telemetry_debugfs:
  -  Respect error code of kstrtou32_from_user()
 
 intel_telemetry_pltdrv:
  -  use devm_platform_ioremap_resource()
 
 mlx-platform:
  -  Add support for next generation systems
  -  Add support for new capability register
  -  Add support for new system type
  -  Set system mux configuration based on system type
  -  Add more definitions for system attributes
  -  Cosmetic changes
 
 platform/mellanox:
  -  mlxreg-hotplug: Add support for new capability register
  -  fix potential deadlock in the tmfifo driver
 
 tools/power/x86/intel-speed-select:
  -  Update version
  -  Change the order for clos disable
  -  Fix result display for turbo-freq auto mode
  -  Add support for core-power discovery
  -  Allow additional core-power mailbox commands
  -  Update MAINTAINERS for the intel uncore frequency control
  -  Add support for Uncore frequency control
 
 touchscreen_dmi:
  -  Fix indentation in several places
  -  Add info for the PiPO W11 tablet
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEqaflIX74DDDzMJJtb7wzTHR8rCgFAl4uxRcACgkQb7wzTHR8
 rCjV3xAArz8e4FmFRe77LF83BHduBYkMjnobDFqWa+BhUicapezU4121K/k1cSBi
 MRhYOK3+lZvMqFTbjFatgkCapjma34+6xMJztrT/drCgmxHzsLQgJsmJ3pXWqnYM
 t4CcPOjvjmZbNJT0NdKjeNyCwFGG6Lupf82fVfIXIshtaKE3xw51242+PJEI978i
 2VL3Ck0NL1stgUkKf/ppHkqsjLb0s6IBtgWv052s/0SlHT7RlFAonsCBxIktVa5L
 divCtnWJKRhbalCPnKOJ1Q6/kpR/BSNq6OddcgaACKH9i0d5KwtdNDdQ66FkEidN
 4rKK3gYMLRpgpLjApH91n7jWMQUaJawVN/3WuRfdnwQOcJ/PVY5vosv2yHKMy3yB
 mFLG0G2v3cXEmvRNEyeKBpSkOrAnsoylFt8zLN6/OP3cQ/jdrnq+UpurxRnBEGkm
 ZDbs5FYqjAPMyjL+/ldhndIdIqvusVgrl2V93BuAzN080UvkQ2FKjLnk0Dkc/xmZ
 XbXUAn+BCUpmABstLa7NJGruV3O9IdiSLHW5Cr0NZC74h4nHqDS57At7LkQbphkC
 Pt/+7tirpaEvSbgQZsVI0WfOwDjJf79FT4dYtCY1GkmSvmvF+OUgKicfEZsfuDan
 hLez0resoJkHLeJtcrF1lW3l3kyMaokBmkUhB1skOYlLUvcsOwg=
 =rMop
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v5.6-1' of git://git.infradead.org/linux-platform-drivers-x86

Pull x86 platform driver updates from Andy Shevchenko:

 - Enable thermal policy for ASUS TUF FX705DY/FX505DY

 - Support left round button on ASUS N56VB

 - Support new Mellanox platforms of basic class VMOD0009 and VMOD0010

 - Intel Comet Lake, Tiger Lake and Elkhart Lake support in the PMC
   driver

 - Big clean-up to Intel PMC core, PMC IPC and SCU IPC drivers

 - Touchscreen support for the PiPO W11 tablet

* tag 'platform-drivers-x86-v5.6-1' of git://git.infradead.org/linux-platform-drivers-x86: (64 commits)
  platform/x86: intel_pmc_ipc: Switch to use driver->dev_groups
  platform/x86: intel_pmc_ipc: Propagate error from kstrtoul()
  platform/x86: intel_pmc_ipc: Use octal permissions in sysfs attributes
  platform/x86: intel_pmc_ipc: Get rid of unnecessary includes
  platform/x86: intel_pmc_ipc: Drop ipc_data_readb()
  platform/x86: intel_pmc_ipc: Drop intel_pmc_gcr_read() and intel_pmc_gcr_write()
  platform/x86: intel_pmc_ipc: Make intel_pmc_ipc_raw_cmd() static
  platform/x86: intel_pmc_ipc: Make intel_pmc_ipc_simple_command() static
  platform/x86: intel_pmc_ipc: Make intel_pmc_gcr_update() static
  platform/x86: intel_scu_ipc: Reformat kernel-doc comments of exported functions
  platform/x86: intel_scu_ipc: Drop intel_scu_ipc_raw_command()
  platform/x86: intel_scu_ipc: Drop intel_scu_ipc_io[read|write][8|16]()
  platform/x86: intel_scu_ipc: Drop unused macros
  platform/x86: intel_scu_ipc: Drop unused prototype intel_scu_ipc_fw_update()
  platform/x86: intel_scu_ipc: Sleeping is fine when polling
  platform/x86: intel_scu_ipc: Drop intel_scu_ipc_i2c_cntrl()
  platform/x86: intel_scu_ipc: Remove Lincroft support
  platform/x86: intel_scu_ipc: Add constants for register offsets
  platform/x86: intel_scu_ipc: Fix interrupt support
  platform/x86: intel_scu_ipcutil: Remove default y from Kconfig
  ...
2020-01-27 10:42:35 -08:00
Jing Lin b131ad5938 dmaengine: idxd: add sysfs ABI for idxd driver
Add the sysfs ABI information for idxd driver in
Documentation/ABI/stable directory.

Signed-off-by: Jing Lin <jing.lin@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/157965025170.73301.13428570530450446901.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-24 11:18:45 +05:30
Jerry Snitselaar 7084eddf6b tpm: Add tpm_version_major sysfs file
Easily determining what TCG version a tpm device implements
has been a pain point for userspace for a long time, so
add a sysfs file to report the TCG major version of a tpm device.

Also add an entry to Documentation/ABI/stable/sysfs-class-tpm
describing the new file.

Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-integrity@vger.kernel.org
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2020-01-22 10:46:51 +02:00
Jerry Snitselaar c269e876c5 tpm: Update mailing list contact information in sysfs-class-tpm
All of the entries in Documentation/ABI/stable/sysfs-class-tpm
point to the old tpmdd-devel mailing list. This patch
updates the entries to point to linux-intergrity.

Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-integrity@vger.kernel.org
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2020-01-22 10:33:02 +02:00
Vadim Pasternak f3efc406d6 Documentation/ABI: Add missed attribute for mlxreg-io sysfs interfaces
Add missed "cpld4_version" attribute.

Fixes: 52675da1d0 ("Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces")
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-13 21:04:33 +02:00
Vadim Pasternak f409482677 Documentation/ABI: Fix documentation inconsistency for mlxreg-io sysfs interfaces
Fix attribute name from "jtag_enable", which described twice to
"cpld3_version", which is expected to be instead of second appearance
of "jtag_enable".

Fixes: 2752e34442 ("Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces")
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-13 21:04:33 +02:00
Vadim Pasternak 435d7e10c4 Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
Add documentation for the new attributes for:
- Exposing reset causes types asserted by: platform reset, SoC reset,
  AC power failure, software power off request.
- Setting and removing system VPD (EEPROM) hardware write protection.
- Voltage regulator devices configuration update status and firmware
  version.
- Setting PCIe ASIC reset to disable or enable state during PCIe root
  complex reset.
- System static topology identification, like system's static I2C
  topology, number and type of FPGA devices within the system and so on.

Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-13 21:02:46 +02:00
Vadim Pasternak 5358c1114d Documentation/ABI: Style changes
Remove blank lines between "What" and "Date" keywords.
Start each section with "What" keyword.

Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-13 21:02:46 +02:00
Vadim Pasternak 74e56f5fde Documentation/ABI: Add missed attribute for mlxreg-io sysfs interfaces
Add missed "cpld4_version" attribute.

Fixes: 52675da1d0 ("Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces")
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-13 21:02:46 +02:00
Vadim Pasternak eea97b258f Documentation/ABI: Fix documentation inconsistency for mlxreg-io sysfs interfaces
Fix attribute name from "jtag_enable", which described twice to
"cpld3_version", which is expected to be instead of second appearance
of "jtag_enable".

Fixes: 2752e34442 ("Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces")
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-13 21:02:45 +02:00
Linus Torvalds 537bd0a159 TTY/Serial patches for 5.5-rc1
Here is the "big" tty and serial driver patches for 5.5-rc1.  It's a bit
 later in the merge window than normal as I wanted to make sure some
 last-minute patches applied to it were all sane.  They seem to be :)
 
 There's a lot of little stuff in here, for the tty core, and for lots of
 serial drivers:
 	- reverts of uartlite serial driver patches that were wrong
 	- msm-serial driver fixes
 	- serial core updates and fixes
 	- tty core fixes
 	- serial driver dma mapping api changes
 	- lots of other tiny fixes and updates for serial drivers
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXebFIQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ylnmACgjfMcfQWa7uC9Q6m2DaQaRMaW6QoAnjg+TgBB
 eW9EhvyXL2VbrsuUl+iH
 =Am9O
 -----END PGP SIGNATURE-----

Merge tag 'tty-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial updates from Greg KH:
 "Here is the "big" tty and serial driver patches for 5.5-rc1.

  It's a bit later in the merge window than normal as I wanted to make
  sure some last-minute patches applied to it were all sane. They seem
  to be :)

  There's a lot of little stuff in here, for the tty core, and for lots
  of serial drivers:

   - reverts of uartlite serial driver patches that were wrong

   - msm-serial driver fixes

   - serial core updates and fixes

   - tty core fixes

   - serial driver dma mapping api changes

   - lots of other tiny fixes and updates for serial drivers

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (58 commits)
  Revert "serial/8250: Add support for NI-Serial PXI/PXIe+485 devices"
  vcs: prevent write access to vcsu devices
  tty: vt: keyboard: reject invalid keycodes
  tty: don't crash in tty_init_dev when missing tty_port
  serial: stm32: fix clearing interrupt error flags
  tty: Fix Kconfig indentation, continued
  serial: serial_core: Perform NULL checks for break_ctl ops
  tty: remove unused argument from tty_open_by_driver()
  tty: Fix Kconfig indentation
  {tty: serial, nand: onenand}: samsung: rename to fix build warning
  serial: ifx6x60: add missed pm_runtime_disable
  serial: pl011: Fix DMA ->flush_buffer()
  Revert "serial-uartlite: Move the uart register"
  Revert "serial-uartlite: Add get serial id if not provided"
  Revert "serial-uartlite: Do not use static struct uart_driver out of probe()"
  Revert "serial-uartlite: Add runtime support"
  Revert "serial-uartlite: Change logic how console_port is setup"
  Revert "serial-uartlite: Use allocated structure instead of static ones"
  tty: serial: msm_serial: Use dma_request_chan() directly for channel request
  tty: serial: tegra: Use dma_request_chan() directly for channel request
  ...
2019-12-03 14:09:14 -08:00
Honggang Li 547ed331bb RDMA/srp: Add parse function for maximum initiator to target IU size
According to SRP specifications 'srp-r16a' and 'srp2r06',
IOControllerProfile attributes for SRP target port include the maximum
initiator to target IU size.

SRP connection daemons, such as srp_daemon, can get the value from the
subnet manager. The SRP connection daemon can pass this value to kernel.

This patch adds a parse function for it.

Upstream commit [1] enables the kernel parameter, 'use_imm_data', by
default. [1] also use (8 * 1024) as the default value for kernel parameter
'max_imm_data'. With those default values, the maximum initiator to target
IU size will be 8260.

In case the SRPT modules, which include the in-tree 'ib_srpt.ko' module,
do not support SRP-2 'immediate data' feature, the default maximum
initiator to target IU size is significantly smaller than 8260. For
'ib_srpt.ko' module, which built from source before [2], the default
maximum initiator to target IU is 2116.

[1] introduces a regression issue for old srp targets with default kernel
parameters, as the connection will be rejected because of a too large
maximum initiator to target IU size.

[1] commit 882981f4a4 ("RDMA/srp: Add support for immediate data")
[2] commit 5dabcd0456 ("RDMA/srpt: Add support for immediate data")

Link: https://lore.kernel.org/r/20190927174352.7800-1-honli@redhat.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Honggang Li <honli@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-08 15:17:32 -03:00
Potnuri Bharat Teja 30e0f6cf5a RDMA/iw_cxgb3: Remove the iw_cxgb3 module from kernel
Remove iw_cxgb3 module from kernel as the corresponding HW Chelsio T3 has
reached EOL.

Link: https://lore.kernel.org/r/20190930074252.20133-1-bharat@chelsio.com
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04 15:08:59 -03:00
Oskar Senft 8d310c9107 drivers/tty/serial/8250: Make Aspeed VUART SIRQ polarity configurable
Make the SIRQ polarity for Aspeed AST24xx/25xx VUART configurable via
sysfs. This setting need to be changed on specific host platforms
depending on the selected host interface (LPC / eSPI).

The setting is configurable via sysfs rather than device-tree to stay in
line with other related configurable settings.

On AST2500 the VUART SIRQ polarity can be auto-configured by reading a
bit from a configuration register, e.g. the LPC/eSPI interface
configuration bit.

Tested: Verified on TYAN S7106 mainboard.
Signed-off-by: Oskar Senft <osk@google.com>
Link: https://lore.kernel.org/r/20190905144130.220713-1-osk@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04 15:05:20 +02:00
Mauro Carvalho Chehab e9bb627561 docs: w1: convert to ReST and add to the kAPI group of docs
The 1wire documentation was written with w1 developers in
mind, so, it makes sense to add it together with the driver-api
set.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-07-31 14:16:17 -06:00
Linus Torvalds c309b6f242 docs conversion for v5.3-rc1
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAl0tpocACgkQCF8+vY7k
 4RWoxA//b/fmDXP3WPzrjjSmpyB9ml0/epKzPbT5S2j0lftqKBmet29k+PCjVrTx
 Nq2QauehY9ug5h8UMVUCmzPr95F0tSIGRoqk1vrn7z0K3q6k1SHrtvqbY1Bgb2Uk
 Qvh2YFU4fQLJg8WAbExCjxCdbdmBKQVGKTwCtM+tP5OMxwAFOmQrjGaUaKCKIIA2
 7Wzrx8CpSji+bJ3uK/d36c+4M9oDly5eaxBhoboL3BI0y+GqwiSASGwTO7BxrPOg
 0wq5IZHnqS8+bprT9xQdDOqf+UOY9U1cxE/+sqsHxblfUEx9gfLy/R+FLmJn+SS9
 Z3yLy4SqVHQMpWBjEAGodohikF60PAuTdymSC11jqFaKCUxWrIZg5xO+0blMrxPF
 7vYIexutCkaBMHBlNaNsHIqB7B/2FGGKoN7QW64hwvwJCGvF7OmJcV+R4bROGvh4
 nFuis9/Nm66Fq7I3aw37ThyZ0aWZdaQ0QJTH9ksxU/ZCz2hhMNYu/rXggrDvkS4U
 nr77ZT5Gd7nj4b110zf8+99uiGiinY6hTfzPAuTCLBhaxwrv4/xDHAhpwdEB5T4j
 8gOkxV8c0XWtL7sKqhGJvs/RRe2za0Y9XH6fyxsYfWcfuLjEvug8ouXMad9gxFWH
 DL3WnKJEMGLScei2wux4kGOwEbkR1bUf2cHJfh3GpCB/y8vgLOc=
 =smxY
 -----END PGP SIGNATURE-----

Merge tag 'docs/v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull rst conversion of docs from Mauro Carvalho Chehab:
 "As agreed with Jon, I'm sending this big series directly to you, c/c
  him, as this series required a special care, in order to avoid
  conflicts with other trees"

* tag 'docs/v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (77 commits)
  docs: kbuild: fix build with pdf and fix some minor issues
  docs: block: fix pdf output
  docs: arm: fix a breakage with pdf output
  docs: don't use nested tables
  docs: gpio: add sysfs interface to the admin-guide
  docs: locking: add it to the main index
  docs: add some directories to the main documentation index
  docs: add SPDX tags to new index files
  docs: add a memory-devices subdir to driver-api
  docs: phy: place documentation under driver-api
  docs: serial: move it to the driver-api
  docs: driver-api: add remaining converted dirs to it
  docs: driver-api: add xilinx driver API documentation
  docs: driver-api: add a series of orphaned documents
  docs: admin-guide: add a series of orphaned documents
  docs: cgroup-v1: add it to the admin-guide book
  docs: aoe: add it to the driver-api book
  docs: add some documentation dirs to the driver-api book
  docs: driver-model: move it to the driver-api book
  docs: lp855x-driver.rst: add it to the driver-api book
  ...
2019-07-16 12:21:41 -07:00
Linus Torvalds 2a3c389a0f 5.3 Merge window RDMA pull request
A smaller cycle this time. Notably we see another new driver, 'Soft
 iWarp', and the deletion of an ancient unused driver for nes.
 
 - Revise and simplify the signature offload RDMA MR APIs
 
 - More progress on hoisting object allocation boiler plate code out of the
   drivers
 
 - Driver bug fixes and revisions for hns, hfi1, efa, cxgb4, qib, i40iw
 
 - Tree wide cleanups: struct_size, put_user_page, xarray, rst doc conversion
 
 - Removal of obsolete ib_ucm chardev and nes driver
 
 - netlink based discovery of chardevs and autoloading of the modules
   providing them
 
 - Move more of the rdamvt/hfi1 uapi to include/uapi/rdma
 
 - New driver 'siw' for software based iWarp running on top of netdev,
   much like rxe's software RoCE.
 
 - mlx5 feature to report events in their raw devx format to userspace
 
 - Expose per-object counters through rdma tool
 
 - Adaptive interrupt moderation for RDMA (DIM), sharing the DIM core
   from netdev
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEfB7FMLh+8QxL+6i3OG33FX4gmxoFAl0ozSwACgkQOG33FX4g
 mxqncg//Qe2zSnlbd6r3hofsc1WiHSx/CiXtT52BUGipO+cWQUwO7hGFuUHIFCuZ
 JBg7mc998xkyLIH85a/txd+RwAIApKgHVdd+VlrmybZeYCiERAMFpWg8cHpzrbnw
 l3Ln9fTtJf/NAhO0ZCGV9DCd01fs9yVQgAv21UnLJMUhp9Pzk/iMhu7C7IiSLKvz
 t7iFhEqPXNJdoqZ+wtWyc/463YxKUd9XNg9Z1neQdaeZrX4UjgDbY9x/ub3zOvQV
 jc/IL4GysJ3z8mfx5mAd6sE/jAjhcnJuaGYYATqkxiLZEP+muYwU50CNs951XhJC
 b/EfRQIcLg9kq/u6CP+CuWlMrRWy3U7yj3/mrbbGhlGq88Yt6FGqUf0aFy6TYMaO
 RzTG5ZR+0AmsOrR1QU+DbH9CKX5PGZko6E7UCdjROqUlAUOjNwRr99O5mYrZoM9E
 PdN2vtdWY9COR3Q+7APdhWIA/MdN2vjr3LDsR3H94tru1yi6dB/BPDRcJieozaxn
 2T+YrZbV+9/YgrccpPQCilaQdanXKpkmbYkbEzVLPcOEV/lT9odFDt3eK+6duVDL
 ufu8fs1xapMDHKkcwo5jeNZcoSJymAvHmGfZlo2PPOmh802Ul60bvYKwfheVkhHF
 Eee5/ovCMs1NLqFiq7Zq5mXO0fR0BHyg9VVjJBZm2JtazyuhoHQ=
 =iWcG
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

Pull rdma updates from Jason Gunthorpe:
 "A smaller cycle this time. Notably we see another new driver, 'Soft
  iWarp', and the deletion of an ancient unused driver for nes.

   - Revise and simplify the signature offload RDMA MR APIs

   - More progress on hoisting object allocation boiler plate code out
     of the drivers

   - Driver bug fixes and revisions for hns, hfi1, efa, cxgb4, qib,
     i40iw

   - Tree wide cleanups: struct_size, put_user_page, xarray, rst doc
     conversion

   - Removal of obsolete ib_ucm chardev and nes driver

   - netlink based discovery of chardevs and autoloading of the modules
     providing them

   - Move more of the rdamvt/hfi1 uapi to include/uapi/rdma

   - New driver 'siw' for software based iWarp running on top of netdev,
     much like rxe's software RoCE.

   - mlx5 feature to report events in their raw devx format to userspace

   - Expose per-object counters through rdma tool

   - Adaptive interrupt moderation for RDMA (DIM), sharing the DIM core
     from netdev"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (194 commits)
  RMDA/siw: Require a 64 bit arch
  RDMA/siw: Mark expected switch fall-throughs
  RDMA/core: Fix -Wunused-const-variable warnings
  rdma/siw: Remove set but not used variable 's'
  rdma/siw: Add missing dependencies on LIBCRC32C and DMA_VIRT_OPS
  RDMA/siw: Add missing rtnl_lock around access to ifa
  rdma/siw: Use proper enumerated type in map_cqe_status
  RDMA/siw: Remove unnecessary kthread create/destroy printouts
  IB/rdmavt: Fix variable shadowing issue in rvt_create_cq
  RDMA/core: Fix race when resolving IP address
  RDMA/core: Make rdma_counter.h compile stand alone
  IB/core: Work on the caller socket net namespace in nldev_newlink()
  RDMA/rxe: Fill in wc byte_len with IB_WC_RECV_RDMA_WITH_IMM
  RDMA/mlx5: Set RDMA DIM to be enabled by default
  RDMA/nldev: Added configuration of RDMA dynamic interrupt moderation to netlink
  RDMA/core: Provide RDMA DIM support for ULPs
  linux/dim: Implement RDMA adaptive moderation (DIM)
  IB/mlx5: Report correctly tag matching rendezvous capability
  docs: infiniband: add it to the driver-api bookset
  IB/mlx5: Implement VHCA tunnel mechanism in DEVX
  ...
2019-07-15 20:38:15 -07:00
Mauro Carvalho Chehab baa293e954 docs: driver-api: add a series of orphaned documents
There are lots of documents under Documentation/*.txt and a few other
orphan documents elsehwere that belong to the driver-API book.

Move them to their right place.

Reviewed-by: Cornelia Huck <cohuck@redhat.com> # vfio-related parts
Acked-by: Logan Gunthorpe <logang@deltatee.com> # switchtec
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-15 11:03:02 -03:00
Mauro Carvalho Chehab 4f4cfa6c56 docs: admin-guide: add a series of orphaned documents
There are lots of documents that belong to the admin-guide but
are on random places (most under Documentation root dir).

Move them to the admin guide.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2019-07-15 11:03:02 -03:00
Linus Torvalds 5516745311 platform-drivers-x86 for v5.3-1
ASUS WMI driver got a big refactoring in order to support the TUF Gaming
 laptops. Besides that, the regression with backlight being permanently off
 on various EeePC laptops has been fixed.
 
 Accelerometer on HP ProBook 450 G0 shows wrong measurements due to
 X axis being inverted. This has been fixed.
 
 Intel PMC core driver has been extended to be ACPI enumerated
 if the DSDT provides device with _HID "INT33A1". This allows
 to convert the driver to be pure platform and support new hardware
 purely based on ACPI DSDT.
 
 From now on the Intel Speed Select Technology is supported thru
 a corresponding driver. This driver provides an access to the features
 of the ISST, such as Performance Profile, Core Power, Base frequency and
 Turbo Frequency.
 
 Mellanox platform drivers has been refactored and now extended
 to support more systems, including new coming ones.
 
 The OLPC XO-1.75 platform is now supported.
 
 CB4063 Beckhoff Automation board is using PMC clocks,
 provided via pmc_atom driver, for ethernet controllers in a way
 that they can't be managed by the clock driver. The quirk
 has been extended to cover this case.
 
 Touchscreen on Chuwi Hi10 Plus tablet has been enabled. Meanwhile
 the information of Chuwi Hi10 Air has been fixed to cover more models
 based on the same platform.
 
 Xiaomi notebooks have WMI interface enabled. Thus, the driver to support it
 has been provided. It required some extension of the generic WMI library,
 which allows to propagate opaque context to the ->probe() of the
 individual drivers.
 
 This release includes debugfs clean up from Greg KH for several drivers
 that drop return code check and make debugfs absence or failure non-fatal.
 
 Miscellaneous fixes here and there, mostly for Acer WMI and
 various Intel drivers.
 
 The listed below commits are duplicated due to previously pushed fixes in v5.2 cycle:
 - 1dd93f873d platform/x86: asus-wmi: Only Tell EC the OS will handle display hotkeys from asus_nb_wmi
 - 89ae3a0736 platform/x86: intel-vbtn: Report switch events when event wakes device
 - fa882fc80d platform/x86: mlx-platform: Fix parent device in i2c-mux-reg device registration
 - 0bfcd24b39 platform/mellanox: mlxreg-hotplug: Add devm_free_irq call to remove flow
 
 The following is an automated git shortlog grouped by driver:
 
 acer-wmi:
  -  Mark expected switch fall-throughs
  -  no need to check return value of debugfs_create functions
 
 asus-nb-wmi:
  -  Add microphone mute key code
 
 asus-wmi:
  -  Use dev_get_drvdata()
  -  Do not disable keyboard backlight on unloading
  -  Switch fan boost mode
  -  Enhance detection of thermal data
  -  Organize code into sections
  -  Refactor error handling
  -  Support WMI event queue
  -  Refactor WMI event handling
  -  Improve DSTS WMI method ID detection
  -  Increase input buffer size of WMI methods
  -  Fix preserving keyboard backlight intensity on load
  -  Fix hwmon device cleanup
  -  no need to check return value of debugfs_create functions
  -  Only Tell EC the OS will handle display hotkeys from asus_nb_wmi
 
 dell-laptop:
  -  no need to check return value of debugfs_create functions
 
 hp_accel:
  -  Add support for HP ProBook 450 G0
 
 ideapad-laptop:
  -  no need to check return value of debugfs_create functions
 
 intel_int0002_vgpio:
  -  Get rid of custom ICPU() macro
 
 intel_menlow:
  -  avoid null pointer deference error
 
 intel_pmc:
  -  no need to check return value of debugfs_create functions
 
 intel_pmc_core:
  -  Attach using APCI HID "INT33A1"
  -  transform Pkg C-state residency from TSC ticks into microseconds
 
 intel_telemetry:
  -  no need to check return value of debugfs_create functions
 
 intel-vbtn:
  -  Report switch events when event wakes device
 
 ISST:
  -  Restore state on resume
  -  Add Intel Speed Select PUNIT MSR interface
  -  Add Intel Speed Select mailbox interface via MSRs
  -  Add Intel Speed Select mailbox interface via PCI
  -  Add Intel Speed Select mmio interface
  -  Add IOCTL to Translate Linux logical CPU to PUNIT CPU number
  -  Store per CPU information
  -  Add common API to register and handle ioctls
  -  Update ioctl-number.txt for Intel Speed Select interface
  -  A tool to validate Intel Speed Select commands
  -  Add .gitignore file
 
 MAINTAINERS:
  -  Update for Intel Speed Select Technology
 
 mlx-platform:
  -  Fix error handling in mlxplat_init()
  -  Add more reset cause attributes
  -  Modify DMI matching order
  -  Add regmap structure for the next generation systems
  -  Change API for i2c-mlxcpld driver activation
  -  Move regmap initialization before all drivers activation
  -  Fix parent device in i2c-mux-reg device registration
  -  Add new attribute for mlxreg-io sysfs interfaces
 
 pcengines-apuv2:
  -  Make two symbols static
  -  Fix PCENGINES_APU2 Kconfig warning
 
 OLPC:
  -  Add a config menu category for XO 1.75
  -  Require CONFIG_POWER_SUPPLY for XO-1.75 EC
  -  Fix olpc_xo175_ec_cmd() return value
  -  Make olpc_dt_compatible_match() static __init
  -  Add INPUT dependencies
  -  Fix build error without CONFIG_SPI
  -  Add a regulator for the DCON
  -  Add XO-1.75 EC driver
  -  Use BIT() and GENMASK() for event masks
  -  Avoid a warning if the EC didn't register yet
  -  Move EC-specific functionality out from x86
  -  Remove an unused include
  -  Add OLPC XO-1.75 EC bindings
 
 platform/mellanox:
  -  mlxreg-hotplug: Add devm_free_irq call to remove flow
 
 pmc_atom:
  -  Add CB4063 Beckhoff Automation board to critclk_systems DMI table
  -  no need to check return value of debugfs_create functions
 
 Kconfig:
  - Remove left-over BACKLIGHT_LCD_SUPPORT
 
 samsung-laptop:
  -  no need to check return value of debugfs_create functions
 
 touchscreen_dmi:
  -  Update Hi10 Air filter
  -  Add info for the CHUWI Hi10 Plus tablet.
 
 wmi:
  -  add Xiaomi WMI key driver
  -  add context argument to the probe function
  -  add context pointer field to struct wmi_device_id
  -  Add function to get _UID of WMI device
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEqaflIX74DDDzMJJtb7wzTHR8rCgFAl0rP88ACgkQb7wzTHR8
 rCis8BAAnRgRgi8x1C7xn66gAUHsDXpY0tF9cp/Fw3HyTmFCQkRSmnLkMM2DqGi+
 dvB9U1zPcGWwdwryKFsJXioEK3erYpiYyT2VwLtW4S7P5jQ+N9biT4TZ8yFp0MEr
 MZC50LZDV1JTp1a0GQyrMpfoMBnE7UhR2GL8UbGli/WwXFE5BLkrJ1pdrjhYZOHl
 rJcgq3HPAhV5qkUkIU7gTC2GGSPydjBqk0OhVIU4dPsYwXIb2gXc0yR0QVwKm5x3
 I/NQwBOBMKmdI6uJ8BJyg/p888Strw65YJaTe5wtvG8ljuIbcN/aQ3ZmClNrUnc0
 58byqJCpRhg9HN39VpF9rsApEGxKTlitAUAUKy7lgue7/mycHbA1Syzz29AIM+2v
 ey2/zgFeeWtgh1cuh2cUWlCE6woW7ED4VpDxhkXlX4xGUp+CILEiFqcsULlcc4j5
 sgojCLRPs78roYj9Y84CwYbsd7J/Ce4r2evBpKYPqYxDbUiuH2aVQtEdPTKv9/xC
 yHtBuJJSxY7a+sf4OZONRo13dfvRoZIPjcccR8yTOakS2/1Fqph7MpHyDkwFAfeS
 M2f+OcJn9IECol1391PTLj9Dx3jApyVk21HJdiIj7sKZgJOSS54AFm0/Ywk0MFpY
 XScXKulV48SdL4ZKup5aIpDzyP5zuvXszKQboRitep1dHiR9bl0=
 =DC5j
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v5.3-1' of git://git.infradead.org/linux-platform-drivers-x86

Pull x86 platform driver updates from Andy Shevchenko:
 "Gathered a bunch of x86 platform driver changes. It's rather big,
  since includes two big refactors and completely new driver:

   - ASUS WMI driver got a big refactoring in order to support the TUF
     Gaming laptops. Besides that, the regression with backlight being
     permanently off on various EeePC laptops has been fixed.

   - Accelerometer on HP ProBook 450 G0 shows wrong measurements due to
     X axis being inverted. This has been fixed.

   - Intel PMC core driver has been extended to be ACPI enumerated if
     the DSDT provides device with _HID "INT33A1". This allows to
     convert the driver to be pure platform and support new hardware
     purely based on ACPI DSDT.

   - From now on the Intel Speed Select Technology is supported thru a
     corresponding driver. This driver provides an access to the
     features of the ISST, such as Performance Profile, Core Power, Base
     frequency and Turbo Frequency.

   - Mellanox platform drivers has been refactored and now extended to
     support more systems, including new coming ones.

   - The OLPC XO-1.75 platform is now supported.

   - CB4063 Beckhoff Automation board is using PMC clocks, provided via
     pmc_atom driver, for ethernet controllers in a way that they can't
     be managed by the clock driver. The quirk has been extended to
     cover this case.

   - Touchscreen on Chuwi Hi10 Plus tablet has been enabled. Meanwhile
     the information of Chuwi Hi10 Air has been fixed to cover more
     models based on the same platform.

   - Xiaomi notebooks have WMI interface enabled. Thus, the driver to
     support it has been provided. It required some extension of the
     generic WMI library, which allows to propagate opaque context to
     the ->probe() of the individual drivers.

  This release includes debugfs clean up from Greg KH for several
  drivers that drop return code check and make debugfs absence or
  failure non-fatal.

  Also miscellaneous fixes here and there, mostly for Acer WMI and
  various Intel drivers"

* tag 'platform-drivers-x86-v5.3-1' of git://git.infradead.org/linux-platform-drivers-x86: (74 commits)
  platform/x86: Fix PCENGINES_APU2 Kconfig warning
  tools/power/x86/intel-speed-select: Add .gitignore file
  platform/x86: mlx-platform: Fix error handling in mlxplat_init()
  platform/x86: intel_pmc_core: Attach using APCI HID "INT33A1"
  platform/x86: intel_pmc_core: transform Pkg C-state residency from TSC ticks into microseconds
  platform/x86: asus-wmi: Use dev_get_drvdata()
  Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
  platform/x86: mlx-platform: Add more reset cause attributes
  platform/x86: mlx-platform: Modify DMI matching order
  platform/x86: mlx-platform: Add regmap structure for the next generation systems
  platform/x86: mlx-platform: Change API for i2c-mlxcpld driver activation
  platform/x86: mlx-platform: Move regmap initialization before all drivers activation
  MAINTAINERS: Update for Intel Speed Select Technology
  tools/power/x86: A tool to validate Intel Speed Select commands
  platform/x86: ISST: Restore state on resume
  platform/x86: ISST: Add Intel Speed Select PUNIT MSR interface
  platform/x86: ISST: Add Intel Speed Select mailbox interface via MSRs
  platform/x86: ISST: Add Intel Speed Select mailbox interface via PCI
  platform/x86: ISST: Add Intel Speed Select mmio interface
  platform/x86: ISST: Add IOCTL to Translate Linux logical CPU to PUNIT CPU number
  ...
2019-07-14 16:51:47 -07:00
Vadim Pasternak ba07e3aacc Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
Add documentation for the new attributes for exposing reset causes for
the next type of resets: caused by different watchdog, BIOS reload,
ASIC reset request.

Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-07-03 15:37:33 +03:00
Mauro Carvalho Chehab 4056e79faa ABI: sysfs-driver-mlxreg-io: fix the what fields
The author of this file should be given an award for creativity:
the What: fields on this file technically fulfills the description
at README. Yet, the way it is, it can't be parsed on a script,
and if someone would try to do something like:

	grep hwmon*/jtag_enable

It wouldn't find anything.

Fix the What fields in a way that it can be parseable by a
script and other search tools.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-21 17:06:35 +02:00
Jason Gunthorpe 2d3c72ed50 rdma: Remove nes
This driver was first merged over 10 years ago and has not seen major
activity by the authors in the last 7 years. However, in that time it has
been patched 150 times to adapt it to changing kernel APIs.

Further, the hardware has several issues, like not supporting 64 bit DMA,
that make it rather uninteresting for use with modern systems and RDMA.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-06-13 09:59:49 -04:00
Linus Torvalds f678d6da74 Char/Misc patches for 5.2-rc1 - part 2
Here is the "real" big set of char/misc driver patches for 5.2-rc1
 
 Loads of different driver subsystem stuff in here, all over the places:
   - thunderbolt driver updates
   - habanalabs driver updates
   - nvmem driver updates
   - extcon driver updates
   - intel_th driver updates
   - mei driver updates
   - coresight driver updates
   - soundwire driver cleanups and updates
   - fastrpc driver updates
   - other minor driver updates
   - chardev minor fixups
 
 Feels like this tree is getting to be a dumping ground of "small driver
 subsystems" these days.  Which is fine with me, if it makes things
 easier for those subsystem maintainers.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iGwEABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXNHE2w8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykvyQCYj5vSHQ88yEU+bzwGzQQLOBWYIwCgm5Iku0Y3
 f6V3MvRffg4qUp3cGbU=
 =R37j
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-5.2-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc update part 2 from Greg KH:
 "Here is the "real" big set of char/misc driver patches for 5.2-rc1

  Loads of different driver subsystem stuff in here, all over the places:
   - thunderbolt driver updates
   - habanalabs driver updates
   - nvmem driver updates
   - extcon driver updates
   - intel_th driver updates
   - mei driver updates
   - coresight driver updates
   - soundwire driver cleanups and updates
   - fastrpc driver updates
   - other minor driver updates
   - chardev minor fixups

  Feels like this tree is getting to be a dumping ground of "small
  driver subsystems" these days. Which is fine with me, if it makes
  things easier for those subsystem maintainers.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.2-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits)
  intel_th: msu: Add current window tracking
  intel_th: msu: Add a sysfs attribute to trigger window switch
  intel_th: msu: Correct the block wrap detection
  intel_th: Add switch triggering support
  intel_th: gth: Factor out trace start/stop
  intel_th: msu: Factor out pipeline draining
  intel_th: msu: Switch over to scatterlist
  intel_th: msu: Replace open-coded list_{first,last,next}_entry variants
  intel_th: Only report useful IRQs to subdevices
  intel_th: msu: Start handling IRQs
  intel_th: pci: Use MSI interrupt signalling
  intel_th: Communicate IRQ via resource
  intel_th: Add "rtit" source device
  intel_th: Skip subdevices if their MMIO is missing
  intel_th: Rework resource passing between glue layers and core
  intel_th: SPDX-ify the documentation
  intel_th: msu: Fix single mode with IOMMU
  coresight: funnel: Support static funnel
  dt-bindings: arm: coresight: Unify funnel DT binding
  coresight: replicator: Add new device id for static replicator
  ...
2019-05-07 13:39:22 -07:00
Linus Torvalds 2310673c3c Char/Misc patches for 5.2-rc1 - part 1
This is the first pull request for the char/misc driver tree for 5.2-rc1
 
 This contains only a small number of bugfixes that would have gone to
 you for 5.1-rc8 if that had happened, but instead I let them sit in
 linux-next for an extra week just "to be sure".
 
 The "big" patch here is for hyper-v, fixing a bug in their sysfs files
 that could cause big problems.  The others are all small fixes,
 resolving reported issues that showed up in 5.1-rcs, plus some odd
 'static' cleanups for the phy drivers that really should have waited for
 -rc1.  Most of these are tagged for the stable trees, so 5.1 will pick
 them up.
 
 All of these have been in linux-next for a while, with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXNHCBQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykBdgCdHD/BEKQrdhFsyfNdqlqF9wbrfZoAoLEFGwCZ
 1TMdkE1qIcSr+BgOyI8a
 =croh
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-5.2-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc update part 1 from Greg KH:
 "This contains only a small number of bugfixes that would have gone to
  you for 5.1-rc8 if that had happened, but instead I let them sit in
  linux-next for an extra week just "to be sure".

  The "big" patch here is for hyper-v, fixing a bug in their sysfs files
  that could cause big problems. The others are all small fixes,
  resolving reported issues that showed up in 5.1-rcs, plus some odd
  'static' cleanups for the phy drivers that really should have waited
  for -rc1. Most of these are tagged for the stable trees, so 5.1 will
  pick them up.

  All of these have been in linux-next for a while, with no reported
  issues"

* tag 'char-misc-5.2-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  misc: rtsx: Fixed rts5260 power saving parameter and sd glitch
  binder: take read mode of mmap_sem in binder_alloc_free_page()
  intel_th: pci: Add Comet Lake support
  stm class: Fix channel bitmap on 32-bit systems
  stm class: Fix channel free in stm output free path
  phy: sun4i-usb: Make sure to disable PHY0 passby for peripheral mode
  phy: fix platform_no_drv_owner.cocci warnings
  phy: mapphone-mdm6600: add gpiolib dependency
  phy: ti: usb2: fix OMAP_CONTROL_PHY dependency
  phy: allwinner: allow compile testing
  phy: qcom-ufs: Make ufs_qcom_phy_disable_iface_clk static
  phy: rockchip-typec: Make usb3_pll_cfg and dp_pll_cfg static
  phy: phy-twl4030-usb: Fix cable state handling
  Drivers: hv: vmbus: Remove the undesired put_cpu_ptr() in hv_synic_cleanup()
  Drivers: hv: vmbus: Fix race condition with new ring_buffer_info mutex
  Drivers: hv: vmbus: Set ring_info field to 0 and remove memset
  Drivers: hv: vmbus: Refactor chan->state if statement
  Drivers: hv: vmbus: Expose monitor data only when monitor pages are used
2019-05-07 13:33:31 -07:00
Srinivas Kandagatla ae0c2d7255 nvmem: core: add NVMEM_SYSFS Kconfig
Many nvmem providers are not very keen on having default sysfs
nvmem entry, as most of the usecases for them are inside kernel
itself. And in some cases read/writes to some areas in nvmem are
restricted and trapped at secure monitor level, so accessing them
from userspace would result in board reboots.

This patch adds new NVMEM_SYSFS Kconfig to make binary sysfs entry
an optional one. This provision will give more flexibility to users.
This patch also moves existing sysfs code to a new file so that its
not compiled in when its not really required.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Gaurav Kohli <gkohli@codeaurora.org>
Tested-by: Gaurav Kohli <gkohli@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25 19:44:33 +02:00
Keith Busch acc02a109b node: Add memory-side caching attributes
System memory may have caches to help improve access speed to frequently
requested address ranges. While the system provided cache is transparent
to the software accessing these memory ranges, applications can optimize
their own access based on cache attributes.

Provide a new API for the kernel to register these memory-side caches
under the memory node that provides it.

The new sysfs representation is modeled from the existing cpu cacheinfo
attributes, as seen from /sys/devices/system/cpu/<cpu>/cache/.  Unlike CPU
cacheinfo though, the node cache level is reported from the view of the
memory. A higher level number is nearer to the CPU, while lower levels
are closer to the last level memory.

The exported attributes are the cache size, the line size, associativity
indexing, and write back policy, and add the attributes for the system
memory caches to sysfs stable documentation.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Brice Goglin <Brice.Goglin@inria.fr>
Tested-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-04 18:41:21 +02:00
Keith Busch e1cf33aafb node: Add heterogenous memory access attributes
Heterogeneous memory systems provide memory nodes with different latency
and bandwidth performance attributes. Provide a new kernel interface
for subsystems to register the attributes under the memory target
node's initiator access class. If the system provides this information,
applications may query these attributes when deciding which node to
request memory.

The following example shows the new sysfs hierarchy for a node exporting
performance attributes:

  # tree -P "read*|write*"/sys/devices/system/node/nodeY/accessZ/initiators/
  /sys/devices/system/node/nodeY/accessZ/initiators/
  |-- read_bandwidth
  |-- read_latency
  |-- write_bandwidth
  `-- write_latency

The bandwidth is exported as MB/s and latency is reported in
nanoseconds. The values are taken from the platform as reported by the
manufacturer.

Memory accesses from an initiator node that is not one of the memory's
access "Z" initiator nodes linked in the same directory may observe
different performance than reported here. When a subsystem makes use
of this interface, initiators of a different access number may not have
the same performance relative to initiators in other access numbers, or
omitted from the any access class' initiators.

Descriptions for memory access initiator performance access attributes
are added to sysfs stable documentation.

Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-04 18:41:21 +02:00
Keith Busch 08d9dbe72b node: Link memory nodes to their compute nodes
Systems may be constructed with various specialized nodes. Some nodes
may provide memory, some provide compute devices that access and use
that memory, and others may provide both. Nodes that provide memory are
referred to as memory targets, and nodes that can initiate memory access
are referred to as memory initiators.

Memory targets will often have varying access characteristics from
different initiators, and platforms may have ways to express those
relationships. In preparation for these systems, provide interfaces for
the kernel to export the memory relationship among different nodes memory
targets and their initiators with symlinks to each other.

If a system provides access locality for each initiator-target pair, nodes
may be grouped into ranked access classes relative to other nodes. The
new interface allows a subsystem to register relationships of varying
classes if available and desired to be exported.

A memory initiator may have multiple memory targets in the same access
class. The target memory's initiators in a given class indicate the
nodes access characteristics share the same performance relative to other
linked initiator nodes. Each target within an initiator's access class,
though, do not necessarily perform the same as each other.

A memory target node may have multiple memory initiators. All linked
initiators in a target's class have the same access characteristics to
that target.

The following example show the nodes' new sysfs hierarchy for a memory
target node 'Y' with access class 0 from initiator node 'X':

  # symlinks -v /sys/devices/system/node/nodeX/access0/
  relative: /sys/devices/system/node/nodeX/access0/targets/nodeY -> ../../nodeY

  # symlinks -v /sys/devices/system/node/nodeY/access0/
  relative: /sys/devices/system/node/nodeY/access0/initiators/nodeX -> ../../nodeX

The new attributes are added to the sysfs stable documentation.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-04 18:41:20 +02:00
Kimberly Brown 46fc15487d Drivers: hv: vmbus: Expose monitor data only when monitor pages are used
There are two methods for signaling the host: the monitor page mechanism
and hypercalls. The monitor page mechanism is used by performance
critical channels (storage, networking, etc.) because it provides
improved throughput. However, latency is increased. Monitor pages are
allocated to these channels.

Monitor pages are not allocated to channels that do not use the monitor
page mechanism. Therefore, these channels do not have a valid monitor id
or valid monitor page data. In these cases, some of the "_show"
functions return incorrect data. They return an invalid monitor id and
data that is beyond the bounds of the hv_monitor_page array fields.

The "channel->offermsg.monitor_allocated" value can be used to determine
whether monitor pages have been allocated to a channel.

Add "is_visible()" callback functions for the device-level and
channel-level attribute groups. These functions will hide the monitor
sysfs files when the monitor mechanism is not used.

Remove ".default_attributes" from "vmbus_chan_attrs" and create a
channel-level attribute group. These changes allow the new
"is_visible()" callback function to be applied to the channel-level
attributes.

Call "sysfs_create_group()" in "vmbus_add_channel_kobj()" to create the
channel's sysfs files. Add a new function,
“vmbus_remove_channel_attr_group()”, and call it in "free_channel()" to
remove the channel's sysfs files when the channel is closed.

Signed-off-by: Kimberly Brown <kimbrownkd@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-20 23:55:56 -04:00
Linus Torvalds dbbdf54c72 platform-drivers-x86 for v5.1-1
Use MODULE_DEVICE_TABLE across several wmi drivers, keeping
 wmi_device_id and MODULE_ALIAS() declarations in sync. Add several
 Ideapad models to the no_hw_rfkill list. Add support for new Mellanox
 platforms, including new fan and LED functionality. Address Dell
 keyboard backlight change event and power button release issues. Update
 dell_rbu to use appropriate memory allocation mechanisms. Several small
 fixes and Ice Lake support for intel_pmc_core. Fix a suspend regression
 for Cherry Trail based devices in intel_int0002_vgpio. A few other
 routine fixes.
 
 The following is an automated git shortlog grouped by driver:
 
 ACPI / scan:
  -  Create platform device for BSG2150 ACPI nodes
 
 Documentation/ABI:
  -  Add new attribute for mlxreg-io sysfs interfaces
  -  Correct mlxreg-io KernelVersion for 5.0
 
 MAINTAINERS:
  -  Include mlxreg.h in Mellanox Platform Driver files
 
 asus-wmi:
  -  Allow loading on systems without the Asus Management GUID
 
 dell-smbios-wmi:
  -  use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
 
 dell-wmi:
  -  use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
  -  Ignore new keyboard backlight change event
 
 dell-wmi-descriptor:
  -  use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
 
 dell_rbu:
  -  fix lock imbalance in img_update_realloc
  -  stop abusing the DMA API
 
 huawei-wmi:
  -  use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
 
 ideapad-laptop:
  -  Add ideapad 330-15ICH to no_hw_rfkill
  -  Add S130-14IGM to no_hw_rfkill list
  -  Add Ideapad 530S-14ARR to no_hw_rfkill list
  -  Add Yoga C930 to no_hw_rfkill_list
  -  Add Y530-I5ICH-1060 to no_hw_rfkill list
  -  Fix no_hw_rfkill_list for Lenovo RESCUER R720-15IKBN
 
 intel-hid:
  -  Missing power button release on some Dell models
 
 intel-wmi-thunderbolt:
  -  use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
 
 intel_int0002_vgpio:
  -  Only implement irq_set_wake on Bay Trail
 
 intel_pmc_core:
  -  Quirk to ignore XTAL shutdown
  -  Add Package cstates residency info
  -  Add ICL platform support
  -  Convert to INTEL_CPU_FAM6 macro
  -  Avoid a u32 overflow
  -  Include Reserved IP for LTR
  -  Fix file permissions for ltr_show
  -  Fix PCH IP name
  -  Fix PCH IP sts reading
  -  Handle CFL regmap properly
 
 leds:
  -  mlxreg: Add support for capability register
 
 mlx-platform:
  -  Fix access mode for fan_dir attribute
  -  Add UID LED for the next generation systems
  -  Add extra CPLD for next generation systems
  -  Add support for new VMOD0007 board name
  -  Add support for fan capability registers
  -  Add support for fan direction register
 
 modpost:
  -  file2alias: define size of alias
 
 platform/mellanox:
  -  mlxreg-hotplug: Fix KASAN warning
 
 platform_data/mlxreg:
  -  Add capability field to core platform data
  -  Document fixes for core platform data
 
 touchscreen_dmi:
  -  Add info for the CHUWI Hi10 Air tablet
  -  Add info for the Chuwi Hi8 Air tablet
  -  Add info for the PoV Wintab P1006w (v1.0) tablet
 
 wmi:
  -  add WMI support to MODULE_DEVICE_TABLE()
  -  move struct wmi_device_id to mod_devicetable.h
  -  fix potential null pointer dereference
 
 wmi-bmof:
  -  use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
 
 x86/CPU:
  -  Add Icelake model number
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEE9M1dh6j+oEL41EZIXFIlAfdBhuEFAlyCu1EACgkQXFIlAfdB
 huFASAf/d0Y6uqhLD3G7cL2kXjOWoTE9ouWUwv19bBpnohGmD3OMMap4y1lb6nRR
 thCJRhpmX4ObS2adAC4otiOxTzmVoYGsuS9kfBwhKIby2VYHCCxxaTUs6bzMdOfV
 GsbaMA+vfb29bU4DcWlRtYZIz2FC5oyjW4ZmcMA6KtuBGjG9K1fG5zANQe4H8I0e
 zCdcrXhpDGIBJgaJR2N42EUCJruPoEXYfHa1G4B/QKvuW0CXHAdSE0YrN4ju+S3e
 Ew9ZXhoxRaqlu+ZB7H5Kyy6Mg3ZGMzbeYyQFLk5f2yiKSTFNiqwTEJl1aE2JSpy3
 g8Im+6E44/4G8QOL40g5XwmrxHw5mA==
 =Bx4o
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v5.1-1' of git://git.infradead.org/linux-platform-drivers-x86

Pull x86 platform driver updates from Darren Hart:

 - use MODULE_DEVICE_TABLE across several wmi drivers, keeping
   wmi_device_id and MODULE_ALIAS() declarations in sync

 - add several Ideapad models to the no_hw_rfkill list

 - add support for new Mellanox platforms, including new fan and LED
   functionality

 - address Dell keyboard backlight change event and power button release
   issues

 - update dell_rbu to use appropriate memory allocation mechanisms

 - several small fixes and Ice Lake support for intel_pmc_core

 - fix a suspend regression for Cherry Trail based devices in
   intel_int0002_vgpio

 - a few other routine fixes

* tag 'platform-drivers-x86-v5.1-1' of git://git.infradead.org/linux-platform-drivers-x86: (50 commits)
  MAINTAINERS: Include mlxreg.h in Mellanox Platform Driver files
  platform/x86: ideapad-laptop: Add S130-14IGM to no_hw_rfkill list
  platform/x86: mlx-platform: Fix access mode for fan_dir attribute
  platform/x86: mlx-platform: Add UID LED for the next generation systems
  platform/x86: mlx-platform: Add extra CPLD for next generation systems
  platform/x86: wmi-bmof: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
  platform/x86: intel-wmi-thunderbolt: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
  platform/x86: huawei-wmi: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
  platform/x86: dell-wmi: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
  platform/x86: dell-wmi-descriptor: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
  platform/x86: dell-smbios-wmi: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
  platform/x86: wmi: add WMI support to MODULE_DEVICE_TABLE()
  platform/x86: wmi: move struct wmi_device_id to mod_devicetable.h
  modpost: file2alias: define size of alias
  platform/x86: touchscreen_dmi: Add info for the CHUWI Hi10 Air tablet
  platform/x86: ideapad-laptop: Add Ideapad 530S-14ARR to no_hw_rfkill list
  platform/x86: ideapad-laptop: Add Yoga C930 to no_hw_rfkill_list
  platform/x86: intel_pmc_core: Quirk to ignore XTAL shutdown
  platform/x86: intel_pmc_core: Add Package cstates residency info
  platform/x86: intel_pmc_core: Add ICL platform support
  ...
2019-03-10 13:16:37 -07:00
Greg Kroah-Hartman 99f63620b4 1. Exopsing counters for state changes of channel ring buffers; this is
useful to investigate performance issues. By Kimberly Brown.
 
 2. Switching to the new generic UUID API, by Andy Shevchenko.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE4n5dijQDou9mhzu83qZv95d3LNwFAlx5S9AACgkQ3qZv95d3
 LNwZ3Q//Z4LbaJf8WQjym1N5/akdhw3q9WL6RDn2o8tqNcaQ5OTpUoiYLjpMdtkr
 pr7YV3/7K0IJS2AnExQ937e+OJ0FyFeXBIGKbaMgj4Z99k0ZwL90aUobj9/4En4P
 9HsKR1nqpYr/cetp9MquO8b8J/kocfU4CJm50RnzxgURgsULmAXY+HsfVMAyPVjJ
 VLbXxPgcuRPTurUzhi5QvDNYHI3pmKJMK17TmeWxKeamLDBDvkfuFqo/U7c/k+cw
 H66gY1Nni+PiYGAvS42COtEexpnhGn3xVZKxSpak9ZlP40DotQc1T9TLM45j3T8/
 paGv20vI9c4yt9NDnTyEoTTdNBmnzq8+/rGJRv5aIeCeQfD3mL+c48fJrdhduK2l
 3253nUfDGRR8KI/rLsLnN80Iey33/YUCy5LuxZy7eRY6xuf9zhzwvP4rKRaWbrqc
 VbC4kNiwcOYcwqMnkfayDrmtc6M3HEoHAmXvtTzvOI7dntPTf2oDMszTzHzxtAHl
 A6bEGXxaMTM/3AjvalThZbjEofyJ26HeZVxcDFApdjrJD//3Puo3XRL8iTLP06rN
 iV6z21NcCjrCP5hmN691Jlg3mhvZsn1SKhPfnnv9IVJ9hc+KheGE2n1bcSYOVpig
 eaFwn7GQnvYdS9KLZ2vKBhGWNwcJqmoTAk6toC80gdxe4Zeny3A=
 =hDVS
 -----END PGP SIGNATURE-----

Merge tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux into char-misc-next

Sasha writes:

1. Exopsing counters for state changes of channel ring buffers; this is
useful to investigate performance issues. By Kimberly Brown.

2. Switching to the new generic UUID API, by Andy Shevchenko.

* tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  Drivers: hv: vmbus: Expose counters for interrupts and full conditions
  vmbus: Switch to use new generic UUID API
2019-03-01 16:43:50 +01:00
Kimberly Brown 396ae57ef1 Drivers: hv: vmbus: Expose counters for interrupts and full conditions
Counter values for per-channel interrupts and ring buffer full
conditions are useful for investigating performance.

Expose counters in sysfs for 2 types of guest to host interrupts:
1) Interrupts caused by the channel's outbound ring buffer transitioning
from empty to not empty
2) Interrupts caused by the channel's inbound ring buffer transitioning
from full to not full while a packet is waiting for enough buffer space to
become available

Expose 2 counters in sysfs for the number of times that write operations
encountered a full outbound ring buffer:
1) The total number of write operations that encountered a full
condition
2) The number of write operations that were the first to encounter a
full condition

Increment the outbound full condition counters in the
hv_ringbuffer_write() function because, for most drivers, a full
outbound ring buffer is detected in that function. Also increment the
outbound full condition counters in the set_channel_pending_send_size()
function. In the hv_sock driver, a full outbound ring buffer is detected
and set_channel_pending_send_size() is called before
hv_ringbuffer_write() is called.

I tested this patch by confirming that the sysfs files were created and
observing the counter values. The values seemed to increase by a
reasonable amount when the Hyper-v related drivers were in use.

Signed-off-by: Kimberly Brown <kimbrownkd@gmail.com>
Reviewed-by:  Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-14 20:56:10 -05:00
Darren Hart (VMware) 6a730fcb9c Documentation/ABI: Correct mlxreg-io KernelVersion for 5.0
The mlxreg-io for the merge window assumed 4.21 as the next kernel
version. Replace 4.21 with 5.0.

Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2019-01-26 11:30:26 -08:00
Vadim Pasternak 2752e34442 Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
Add documentation for the new attribute fan_dir (fan direction for
systems of types MQM87xx, MSN34xx, MSN37xx.

Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
[dvhart: minor gramatical correction]
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2019-01-26 11:08:25 -08:00
Darren Hart (VMware) 522e4ee6e5 Documentation/ABI: Correct mlxreg-io KernelVersion for 5.0
The mlxreg-io for the merge window assumed 4.21 as the next kernel
version. Replace 4.21 with 5.0.

Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2019-01-26 11:08:25 -08:00
Vadim Pasternak 52675da1d0 Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
Add documentation for the new attributes for systems of type MQM87xx,
MSN34xx, MSN37xx. It includes the attributes related to ComEx resets,
system platform reset, JTAG interface enabling, additional CPLD device.
All the above system are equipped with ComEX board, have JTAG selector
and extra CPLD.

Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
[dvhart: Change kernel version from 5.0 to 4.21 until we know for sure]
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2018-12-10 17:54:41 -08:00
Guido Kiener b32abf8f5d usb: usbtmc: Remove sysfs group TermChar and auto_abort
As all the properties of the usbtmc driver can now be
controlled on a per file descriptor basis by ioctl functions
the sysfs interface is of limited use.
We are not aware about applications that are using the sysfs
parameter TermChar, TermCharEnabled or auto_abort.

Signed-off-by: Guido Kiener <guido.kiener@rohde-schwarz.com>
Reviewed-by: Steve Bayless <steve_bayless@keysight.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20 13:04:03 +02:00
Marek Marczykowski-Górecki 197ecb3802 xen/balloon: add runtime control for scrubbing ballooned out pages
Scrubbing pages on initial balloon down can take some time, especially
in nested virtualization case (nested EPT is slow). When HVM/PVH guest is
started with memory= significantly lower than maxmem=, all the extra
pages will be scrubbed before returning to Xen. But since most of them
weren't used at all at that point, Xen needs to populate them first
(from populate-on-demand pool). In nested virt case (Xen inside KVM)
this slows down the guest boot by 15-30s with just 1.5GB needed to be
returned to Xen.

Add runtime parameter to enable/disable it, to allow initially disabling
scrubbing, then enable it back during boot (for example in initramfs).
Such usage relies on assumption that a) most pages ballooned out during
initial boot weren't used at all, and b) even if they were, very few
secrets are in the guest at that time (before any serious userspace
kicks in).
Convert CONFIG_XEN_SCRUB_PAGES to CONFIG_XEN_SCRUB_PAGES_DEFAULT (also
enabled by default), controlling default value for the new runtime
switch.

Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-09-14 08:51:10 -04:00
Linus Torvalds 4290d5b9ca xen: fixes for 4.19-rc2
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCW4lM6AAKCRCAXGG7T9hj
 vs8AAQDysFccg97UdopW3B7yklIaRqkfEIAsxe65f191MXsH2AEAp5SKxZqRPqBP
 a9WHDj8ShB3BhZ/IxpdO9Y59U3Jo4wA=
 =Gt4c
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-4.19b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Pull xen fixes from Juergen Gross:

 - minor cleanup avoiding a warning when building with new gcc

 - a patch to add a new sysfs node for Xen frontend/backend drivers to
   make it easier to obtain the state of a pv device

 - two fixes for 32-bit pv-guests to avoid intermediate L1TF vulnerable
   PTEs

* tag 'for-linus-4.19b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  x86/xen: remove redundant variable save_pud
  xen: export device state to sysfs
  x86/pae: use 64 bit atomic xchg function in native_ptep_get_and_clear
  x86/xen: don't write ptes directly in 32-bit PV guests
2018-08-31 08:45:16 -07:00
Joe Jin 076e2cedd6 xen: export device state to sysfs
Export device state to sysfs to allow for easier get device state.

Signed-off-by: Joe Jin <joe.jin@oracle.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-08-28 17:37:40 -04:00
Linus Torvalds 899fbc33fd platform-drivers-x86 for v4.19-1
The driver for Silead touchscreen configurations has been renamed
 from silead_dmi to touchscreen_dmi since it starts supporting other
 touchscreens which require some DMI quirks. At the same release cycle
 it gets expanded to cover cases for Chuwi Vi10, ONDA V891W,
 Connect Tablet 9, Onda V820w, and Cube KNote i1101 tablets.
 
 Another bunch of changes is related to Mellanox platform code to allow
 user space to communicate with Mellanox for system control and
 monitoring purposes. The driver notifies user on hotplug device signal
 receiving.
 
 ASUS WMI drivers recognize lid flip action on UX360, and correctly
 toggles airplane mode LED. In addition the keyboard backlight toggle
 gets support.
 
 ThinkPad ACPI driver enables support for calculator key (on at least P52).
 It also has been fixed to support three characters model designators,
 which are used for modern laptops. Earlier the battery, marked as BAT1,
 on ThinkPad laptops has not been configured properly, which is fixed.
 On the opposite the multi-battery configurations now probed correctly.
 
 Dell SMBIOS driver starts working on some Dell servers which do not
 support token interface. The regression with backlight detection has
 also been fixed. In order to support dock mode on some laptops,
 Intel virtual button driver has been fixed. The last but not least
 is the fix to Intel HID driver due to changes in Dell systems that
 prevented to use power button.
 
 The following is an automated git shortlog grouped by driver:
 
 acer-wmi:
  -  Silence "unsupported" message a bit
  -  refactor function has_cap
 
 asus-nb-wmi:
  -  Add keymap entry for lid flip action on UX360
 
 asus-wireless:
  -  Fix uninitialized symbol usage
  -  Toggle airplane mode LED
 
 asus-wmi:
  -  Add keyboard backlight toggle support
  -  Call led hw_changed API on kbd brightness change
 
 dell-laptop:
  -  Fix backlight detection
 
 dell-smbios:
  -  make a function and a pointer static
 
 dell-smbios-base:
  -  Support systems without tokens
 
 dell-smbios-wmi:
  -  make function dell_smbios_wmi_call static
 
 ideapad-laptop:
  -  Add Y520-15IKBM and Y720-15IKBM to no_hw_rfkill
  -  Apply no_hw_rfkill to Y20-15IKBM, too
 
 intel-hid:
  -  Add support for Device Specific Methods
 
 intel_ips:
  -  remove redundant variables slope and offset
 
 intel_pmc_core:
  -  Add CNP SLPS0 debug registers
 
 intel_punit_ipc:
  -  fix build errors
 
 intel-vbtn:
  -  Add support for dock mode detection
 
 mlx-platform:
  -  Fix copy-paste error in mlxplat_init()
  -  Remove unused define
  -  Change mlxreg-io configuration for MSN274x systems
  -  Allow mlxreg-io driver activation for more systems
  -  Add ASIC hotplug device configuration
  -  Add new attribute for mlxreg-io sysfs interfaces
  -  Add mlxreg-fan platform driver activation
  -  Add documentation mlxreg-io sysfs interfaces
  -  Add mlxreg-io platform driver activation
 
 platform/mellanox:
  -  mlxreg-hotplug: Add hotplug hwmon uevent notification
  -  mlxreg-hotplug: Improve mechanism of ASIC health discovery
  -  Use 2-factor allocator calls
  -  Introduce support for Mellanox register access driver
 
 thinkpad_acpi:
  -  Fix multi-battery bug
  -  extend battery quirk coverage
  -  Support battery quirk
  -  Proper model/release matching
  -  Add support for calculator hotkey
 
 toshiba_acpi:
  -  Fix defined but not used build warnings
  -  Update KBD backlight LED on second gen laptops
 
 touchscreen_dmi:
  -  Rename silead_dmi to touchscreen_dmi
  -  Add touchscreen info for the Chuwi Vi10 tablet
  -  Sort entries alphabetically
  -  Rename trekstor entries
  -  Add info for the Cube KNote i1101 tablet
  -  Add info for the Onda V820w tablet
  -  Add info for the "Connect Tablet 9" tablet
  -  Add info for the ONDA V891W Dual OS tablet
 
 wmi:
  -  Do not mix pages and kmalloc
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEhiZOUlnC9oKN3n3AmT3/83c5Sy0FAlt9wVgACgkQmT3/83c5
 Sy3Jdg//WnEJZx7+zEsO+3dJnQGN4Fur6xhP79subRhZPFNTZ+D5vMHC9DL8ZQYx
 U8Kz1ilxCC5HuOo2S1BlzRG+h6ztMSYIFo2H8KRdygOqALEH7hoStPEGYdZcQ0qE
 6SKa4MnRw46UcGPij3f6STPiOjicPaLoUSTXZmi2dbmy6sJZMMJamvnRhezgEgJl
 rA6xvg+tKNBK2jwLpAVfLhy4Btd6LCE4EGgkYdnytOM9ByHLDsTWCZxd/9h7WjPa
 L8Zd8rftrazWF6X2tAhpXtUcMPg/D4lfL5HHaMmL9FioycQ88WqDBZN5sEWdIbaP
 OfaMbcbhCIrrHoMNdq0544IgqRQahX+m3VjSkVf3/Aj5AU0nUJMBWSpGHAs7UCSN
 8i8M2jdpVW7CVxA+4OU2l19udKrQzXutfXXhVYX0B3hKCkH7TBKax+m/ev9n2yvZ
 KoTdSJ/4bB6iGhXF8/MA6H72k0g972d4WXozbTusiBO9grqgU1EIe5bYZ4y+FkJL
 9gtK1xgtDJB7J8U14lpGC+zKhcYn1Mn3Iq4i5HD3sfnKsVGGWJIjRZsDtALD2RKT
 OQe7S8xhQWqsUZFGNflWL+8oHyXOHGD5Q8b/YI92ubriyAzh3I3Ybt/atk20vdmG
 QfKU46suOoOUwcAs00v13oo+9s9GatekXEjGgdRJ14vgzdgx3lc=
 =vRud
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v4.19-1' of git://git.infradead.org/linux-platform-drivers-x86

Pull x86 platform driver updates from Andy Shevchenko:

 - The driver for Silead touchscreen configurations has been renamed
   from silead_dmi to touchscreen_dmi since it starts supporting other
   touchscreens which require some DMI quirks

   It also gets expanded to cover cases for Chuwi Vi10, ONDA V891W,
   Connect Tablet 9, Onda V820w, and Cube KNote i1101 tablets.

 - Another bunch of changes is related to Mellanox platform code to
   allow user space to communicate with Mellanox for system control and
   monitoring purposes. The driver notifies user on hotplug device
   signal receiving.

 - ASUS WMI drivers recognize lid flip action on UX360, and correctly
   toggles airplane mode LED. In addition the keyboard backlight toggle
   gets support.

 - ThinkPad ACPI driver enables support for calculator key (on at least
   P52). It also has been fixed to support three characters model
   designators, which are used for modern laptops. Earlier the battery,
   marked as BAT1, on ThinkPad laptops has not been configured properly,
   which is fixed. On the opposite the multi-battery configurations now
   probed correctly.

 - Dell SMBIOS driver starts working on some Dell servers which do not
   support token interface. The regression with backlight detection has
   also been fixed. In order to support dock mode on some laptops, Intel
   virtual button driver has been fixed. The last but not least is the
   fix to Intel HID driver due to changes in Dell systems that prevented
   to use power button.

* tag 'platform-drivers-x86-v4.19-1' of git://git.infradead.org/linux-platform-drivers-x86: (47 commits)
  platform/x86: acer-wmi: Silence "unsupported" message a bit
  platform/x86: intel_punit_ipc: fix build errors
  platform/x86: ideapad: Add Y520-15IKBM and Y720-15IKBM to no_hw_rfkill
  platform/x86: asus-nb-wmi: Add keymap entry for lid flip action on UX360
  platform/x86: acer-wmi: refactor function has_cap
  platform/x86: thinkpad_acpi: Fix multi-battery bug
  platform/x86: thinkpad_acpi: extend battery quirk coverage
  platform/x86: touchscreen_dmi: Add info for the Cube KNote i1101 tablet
  platform/x86: mlx-platform: Fix copy-paste error in mlxplat_init()
  platform/x86: mlx-platform: Remove unused define
  platform/x86: mlx-platform: Change mlxreg-io configuration for MSN274x systems
  Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
  platform/x86: mlx-platform: Allow mlxreg-io driver activation for more systems
  platform/x86: mlx-platform: Add ASIC hotplug device configuration
  platform/mellanox: mlxreg-hotplug: Add hotplug hwmon uevent notification
  platform/mellanox: mlxreg-hotplug: Improve mechanism of ASIC health discovery
  platform/x86: mlx-platform: Add mlxreg-fan platform driver activation
  platform/x86: dell-laptop: Fix backlight detection
  platform/x86: toshiba_acpi: Fix defined but not used build warnings
  platform/x86: thinkpad_acpi: Support battery quirk
  ...
2018-08-22 14:14:15 -07:00
Linus Torvalds d5acba26bf Char/Misc driver patches for 4.19-rc1
Here is the bit set of char/misc drivers for 4.19-rc1
 
 There is a lot here, much more than normal, seems like everyone is
 writing new driver subsystems these days...  Anyway, major things here
 are:
 	- new FSI driver subsystem, yet-another-powerpc low-level
 	  hardware bus
 	- gnss, finally an in-kernel GPS subsystem to try to tame all of
 	  the crazy out-of-tree drivers that have been floating around
 	  for years, combined with some really hacky userspace
 	  implementations.  This is only for GNSS receivers, but you
 	  have to start somewhere, and this is great to see.
 Other than that, there are new slimbus drivers, new coresight drivers,
 new fpga drivers, and loads of DT bindings for all of these and existing
 drivers.
 
 Full details of everything is in the shortlog.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW3g7ew8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykfBgCeOG0RkSI92XVZe0hs/QYFW9kk8JYAnRBf3Qpm
 cvW7a+McOoKz/MGmEKsi
 =TNfn
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the bit set of char/misc drivers for 4.19-rc1

  There is a lot here, much more than normal, seems like everyone is
  writing new driver subsystems these days... Anyway, major things here
  are:

   - new FSI driver subsystem, yet-another-powerpc low-level hardware
     bus

   - gnss, finally an in-kernel GPS subsystem to try to tame all of the
     crazy out-of-tree drivers that have been floating around for years,
     combined with some really hacky userspace implementations. This is
     only for GNSS receivers, but you have to start somewhere, and this
     is great to see.

  Other than that, there are new slimbus drivers, new coresight drivers,
  new fpga drivers, and loads of DT bindings for all of these and
  existing drivers.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits)
  android: binder: Rate-limit debug and userspace triggered err msgs
  fsi: sbefifo: Bump max command length
  fsi: scom: Fix NULL dereference
  misc: mic: SCIF Fix scif_get_new_port() error handling
  misc: cxl: changed asterisk position
  genwqe: card_base: Use true and false for boolean values
  misc: eeprom: assignment outside the if statement
  uio: potential double frees if __uio_register_device() fails
  eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency
  misc: ti-st: Fix memory leak in the error path of probe()
  android: binder: Show extra_buffers_size in trace
  firmware: vpd: Fix section enabled flag on vpd_section_destroy
  platform: goldfish: Retire pdev_bus
  goldfish: Use dedicated macros instead of manual bit shifting
  goldfish: Add missing includes to goldfish.h
  mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux
  dt-bindings: mux: add adi,adgs1408
  Drivers: hv: vmbus: Cleanup synic memory free path
  Drivers: hv: vmbus: Remove use of slow_virt_to_phys()
  Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind()
  ...
2018-08-18 11:04:51 -07:00
Vadim Pasternak a34e134314 Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
The systems of type MSN21xx, MSN201x have a slight difference from the
default reset cause bits description, it uses reset_hotswap_or_halt
instead of reset_hotswap_or_wd. New attribute is documented.

Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2018-08-01 17:41:31 -07:00
Stephen Hemminger 7ceb1c3753 Drivers: hv: vmbus: add numa_node to sysfs
Being able to find the numa_node for a device is useful for userspace
drivers (DPDK) and also for diagnosing performance issues.  This makes
vmbus similar to pci.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-29 08:09:56 +02:00
Vadim Pasternak f193f7985f Documentation/ABI: Add documentation mlxreg-io sysfs interfaces
Add documentation for mlxreg-io platform driver sysfs interfaces to allow
user space access for system resets control, reset causes monitoring,
programmable devices version reading and device selection control.

Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2018-06-19 16:57:21 -07:00
Peter Meerwald e529f4d651 rfkill: Correctly document rkill subfolder range as >= 0 in sysfs-class-rfkill
The first subfolder is rfkill0, hence rfkillX (X >= 0).
Also fix two trivial typos.

Signed-off-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2018-06-15 13:35:49 +02:00
Linus Torvalds abf7dba7c4 Char/Misc driver patches for 4.18-rc1
Here is the "big" char and misc driver patches for 4.18-rc1.
 
 It's not a lot of stuff here, but there are some highlights:
 	- coreboot driver updates
 	- soundwire driver updates
 	- android binder updates
 	- fpga big sync, mostly documentation
 	- lots of minor driver updates
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWxbXfQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymwCACdFbUy2kWwrpZWSfSBpawfrs75lLMAmwVOe+62
 9aDsDWzDVUEFxF20qiE6
 =CMJ3
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the "big" char and misc driver patches for 4.18-rc1.

  It's not a lot of stuff here, but there are some highlights:

   - coreboot driver updates

   - soundwire driver updates

   - android binder updates

   - fpga big sync, mostly documentation

   - lots of minor driver updates

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (81 commits)
  vmw_balloon: fixing double free when batching mode is off
  MAINTAINERS: Add driver-api/fpga path
  fpga: clarify that unregister functions also free
  documentation: fpga: move fpga-region.txt to driver-api
  documentation: fpga: add bridge document to driver-api
  documentation: fpga: move fpga-mgr.txt to driver-api
  Documentation: fpga: move fpga overview to driver-api
  fpga: region: kernel-doc fixes
  fpga: bridge: kernel-doc fixes
  fpga: mgr: kernel-doc fixes
  fpga: use SPDX
  fpga: region: change api, add fpga_region_create/free
  fpga: bridge: change api, don't use drvdata
  fpga: manager: change api, don't use drvdata
  fpga: region: don't use drvdata in common fpga code
  Drivers: hv: vmbus: Removed an unnecessary cast from void *
  ver_linux: Drop redundant calls to system() to test if file is readable
  ver_linux: Move stderr redirection from function parameter to function body
  misc: IBM Virtual Management Channel Driver (VMC)
  rpmsg: Correct support for MODULE_DEVICE_TABLE()
  ...
2018-06-05 16:20:22 -07:00
Stephen Hemminger f59acbc5e0 doc: fix sysfs ABI documentation
In 4.9 kernel, the sysfs files for Hyper-V VMBus changed name but
the documentation files were not updated. The current sysfs file
names are /sys/bus/vmbus/devices/<UUID>/...

See commit 9a56e5d6a0ba ("Drivers: hv: make VMBus bus ids persistent")
and commit f6b2db084b ("vmbus: make sysfs names consistent with PCI")

Reported-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 16:06:48 +02:00