Граф коммитов

35 Коммитов

Автор SHA1 Сообщение Дата
Peter Zijlstra 468a15bb4c sched, trace: update trace_sched_wakeup()
Impact: extend the wakeup tracepoint with the info whether the wakeup was real

Add the information needed to distinguish 'real' wakeups from 'false'
wakeups.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-25 13:10:21 +01:00
Pekka J Enberg 213cc06079 ftrace: introduce tracing_reset_online_cpus() helper
Impact: cleanup

This patch factors out common code from multiple tracers into a
tracing_reset_online_cpus() function and converts the tracers to use it.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-19 16:29:34 +01:00
Ingo Molnar c71dd42db2 tracing: fix warnings in kernel/trace/trace_sched_switch.c
these warnings:

  kernel/trace/trace_sched_switch.c: In function ‘tracing_sched_register’:
  kernel/trace/trace_sched_switch.c:96: warning: passing argument 1 of ‘register_trace_sched_wakeup_new’ from incompatible pointer type
  kernel/trace/trace_sched_switch.c:112: warning: passing argument 1 of ‘unregister_trace_sched_wakeup_new’ from incompatible pointer type
  kernel/trace/trace_sched_switch.c: In function ‘tracing_sched_unregister’:
  kernel/trace/trace_sched_switch.c:121: warning: passing argument 1 of ‘unregister_trace_sched_wakeup_new’ from incompatible pointer type

Trigger because sched_wakeup_new tracepoints need the same trace
signature as sched_wakeup - which was changed recently.

Fix it.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-19 01:05:38 +01:00
Frederic Weisbecker 1c80025a49 tracing/ftrace: change the type of the init() callback
Impact: extend the ->init() method with the ability to fail

This bring a way to know if the initialization of a tracer successed.
A tracer must return 0 on success and a traditional error (ie:
-ENOMEM) if it fails.

If a tracer fails to init, it is free to print a detailed warn. The
tracing api will not and switch to a new tracer will just return the
error from the init callback.

Note: this will be used for the return tracer.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 07:55:23 +01:00
Steven Rostedt c76f06945b ftrace: remove trace array ctrl
Impact: remove obsolete variable in trace_array structure

With the new start / stop method of ftrace, the ctrl variable
in the trace_array structure is now obsolete. Remove it.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-08 09:51:39 +01:00
Steven Rostedt bbf5b1a0ce ftrace: remove ctrl_update method
Impact: Remove the ctrl_update tracer method

With the new quick start/stop method of tracing, the ctrl_update
method is out of date.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-08 09:51:34 +01:00
Steven Rostedt e168e0516e ftrace: fix sched_switch API
Impact: fix for sched_switch that broke dynamic ftrace startup

The commit: tracing/fastboot: use sched switch tracer from boot tracer
broke the API of the sched_switch trace. The use of the
tracing_start/stop_cmdline record is for only recording the cmdline,
NOT recording the schedule switches themselves.

Seeing that the boot tracer broke the API to do something that it
wanted, this patch adds a new interface for the API while
puting back the original interface of the old API.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-08 09:51:18 +01:00
Steven Rostedt 75f5c47da3 ftrace: fix boot trace sched startup
Impact: boot tracer startup modified

The boot tracer calls into some of the schedule tracing private functions
that should not be exported. This patch cleans it up, and makes
way for further changes in the ftrace infrastructure.

This patch adds a api to assign a tracer array to the schedule
context switch tracer.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-08 09:51:09 +01:00
Steven Rostedt 9036990d46 ftrace: restructure tracing start/stop infrastructure
Impact: change where tracing is started up and stopped

Currently, when a new tracer is selected via echo'ing a tracer name into
the current_tracer file, the startup is only done if tracing_enabled is
set to one. If tracing_enabled is changed to zero (by echo'ing 0 into
the tracing_enabled file) a full shutdown is performed.

The full startup and shutdown of a tracer can be expensive and the
user can lose out traces when echo'ing in 0 to the tracing_enabled file,
because the process takes too long. There can also be places that
the user would like to start and stop the tracer several times and
doing the full startup and shutdown of a tracer might be too expensive.

This patch performs the full startup and shutdown when a tracer is
selected. It also adds a way to do a quick start or stop of a tracer.
The quick version is just a flag that prevents the tracing from
taking place, but the overhead of the code is still there.

For example, the startup of a tracer may enable tracepoints, or enable
the function tracer.  The stop and start will just set a flag to
have the tracer ignore the calls when the tracepoint or function trace
is called.  The overhead of the tracer may still be present when
the tracer is stopped, but no tracing will occur. Setting the tracer
to the 'nop' tracer (or any other tracer) will perform the shutdown
of the tracer which will disable the tracepoint or disable the
function tracer.

The tracing_enabled file will simply start or stop tracing.

This change is all internal. The end result for the user should be the same
as before. If tracing_enabled is not set, no trace will happen.
If tracing_enabled is set, then the trace will happen. The tracing_enabled
variable is static between tracers. Enabling  tracing_enabled and
going to another tracer will keep tracing_enabled enabled. Same
is true with disabling tracing_enabled.

This patch will now provide a fast start/stop method to the users
for enabling or disabling tracing.

Note: There were two methods to the struct tracer that were never
 used: The methods start and stop. These were to be used as a hook
 to the reading of the trace output, but ended up not being
 necessary. These two methods are now used to enable the start
 and stop of each tracer, in case the tracer needs to do more than
 just not write into the buffer. For example, the irqsoff tracer
 must stop recording max latencies when tracing is stopped.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-06 07:51:03 +01:00
Frederic Weisbecker 79a9d461fd tracing/ftrace: fix a bug when switch current tracer to sched tracer
Impact: fix boot tracer + sched tracer coupling bug

Fix a bug that made the sched_switch tracer unable to run
if set as the current_tracer after the boot tracer.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-04 17:14:08 +01:00
Frederic Weisbecker efade6e782 tracing/ftrace: types and naming corrections for sched tracer
Impact: cleanup

This patch applies some corrections suggested by Steven Rostedt.

Change the type of shed_ref into int since it is used
into a Mutex, we don't need it anymore as an atomic
variable in the sched_switch tracer.
Also change the name of the register mutex.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-04 17:14:07 +01:00
Frederic Weisbecker d7ad44b697 tracing/fastboot: use sched switch tracer from boot tracer
Impact: enhance boot trace output with scheduling events

Use the sched_switch tracer from the boot tracer.

We also can trace schedule events inside the initcalls.
Sched tracing is disabled after the initcall has finished and
then reenabled before the next one is started.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-04 17:14:06 +01:00
Frederic Weisbecker e55f605c14 tracing/ftrace: remove unused code in sched_switch tracer
Impact: cleanup

When init_sched_switch_trace() is called, it has no reason to start
the sched tracer if the sched_ref is not zero.

_ If this is non-zero, the tracer is already used, but we can register it
to the tracing engine. There is already a security which avoid the tracer
probes not to be resgistered twice.

_ If this is zero, this block will not be used.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-04 17:14:05 +01:00
Frederic Weisbecker 07695fa04e tracing/ftrace: fix a race condition in sched_switch tracer
Impact: fix race condition in sched_switch tracer

This patch fixes a race condition in the sched_switch tracer. If
several tasks (IE: concurrent initcalls) are playing with
tracing_start_cmdline_record() and tracing_stop_cmdline_record(), the
following situation could happen:

_ Task A and B are using the same tracepoint probe. Task A holds it.
  Task B is sleeping and doesn't hold it.

_ Task A frees the sched tracer, then sched_ref is decremented to 0.

_ Task A is preempted and hadn't yet unregistered its tracepoint
  probe, then B runs.

_ B increments sched_ref, sees it's 1 and then guess it has to
  register its probe. But it has not been freed by task A.

_ A lot of bad things can happen after that...

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-04 17:14:04 +01:00
Steven Rostedt 3ea2e6d71a ftrace: make some tracers reentrant
Now that the ring buffer is reentrant, some of the ftrace tracers
(sched_swich, debugging traces) can also be reentrant.

Note: Never make the function tracer reentrant, that can cause
  recursion problems all over the kernel. The function tracer
  must disable reentrancy.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14 10:39:20 +02:00
Steven Rostedt 38697053fa ftrace: preempt disable over interrupt disable
With the new ring buffer infrastructure in ftrace, I'm trying to make
ftrace a little more light weight.

This patch converts a lot of the local_irq_save/restore into
preempt_disable/enable.  The original preempt count in a lot of cases
has to be sent in as a parameter so that it can be recorded correctly.
Some places were recording it incorrectly before anyway.

This is also laying the ground work to make ftrace a little bit
more reentrant, and remove all locking. The function tracers must
still protect from reentrancy.

Note: All the function tracers must be careful when using preempt_disable.
  It must do the following:

  resched = need_resched();
  preempt_disable_notrace();
  [...]
  if (resched)
	preempt_enable_no_resched_notrace();
  else
	preempt_enable_notrace();

The reason is that if this function traces schedule() itself, the
preempt_enable_notrace() will cause a schedule, which will lead
us into a recursive failure.

If we needed to reschedule before calling preempt_disable, we
should have already scheduled. Since we did not, this is most
likely that we should not and are probably inside a schedule
function.

If resched was not set, we still need to catch the need resched
flag being set when preemption was off and the if case at the
end will catch that for us.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14 10:39:09 +02:00
Steven Rostedt 3928a8a2d9 ftrace: make work with new ring buffer
This patch ports ftrace over to the new ring buffer.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14 10:38:57 +02:00
Mathieu Desnoyers b07c3f193a ftrace: port to tracepoints
Porting the trace_mark() used by ftrace to tracepoints. (cleanup)

Changelog :
- Change error messages : marker -> tracepoint

[ mingo@elte.hu: conflict resolutions ]
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Acked-by: 'Peter Zijlstra' <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14 10:32:26 +02:00
Steven Rostedt 007c05d4d2 ftrace: move sched_switch enable after markers
We have two markers now that are enabled on sched_switch. One that records
the context switching and the other that records task wake ups. Currently
we enable the tracing first and then set the markers. This causes some
confusing traces:

# tracer: sched_switch
#
#           TASK-PID   CPU#    TIMESTAMP  FUNCTION
#              | |      |          |         |
       trace-cmd-3973  [00]   115.834817:   3973:120:R   +     3:  0:S
       trace-cmd-3973  [01]   115.834910:   3973:120:R   +     6:  0:S
       trace-cmd-3973  [02]   115.834910:   3973:120:R   +     9:  0:S
       trace-cmd-3973  [03]   115.834910:   3973:120:R   +    12:  0:S
       trace-cmd-3973  [02]   115.834910:   3973:120:R   +     9:  0:S
          <idle>-0     [02]   115.834910:      0:140:R ==>  3973:120:R

Here we see that trace-cmd with PID 3973 wakes up task 9 but the next line
shows the idle task doing a context switch to task 3973.

Enabling the tracing to _after_ the markers are set creates a much saner
output:

# tracer: sched_switch
#
#           TASK-PID   CPU#    TIMESTAMP  FUNCTION
#              | |      |          |         |
          <idle>-0     [02]  7922.634225:      0:140:R ==>  4790:120:R
       trace-cmd-4789  [03]  7922.634225:      0:140:R   +  4790:120:R

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-11 15:49:18 +02:00
Ingo Molnar f22529351f namespacecheck: fixes
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-16 14:44:13 +02:00
Steven Rostedt 41bc8144d0 ftrace: fix up cmdline recording
The new work with converting the trace hooks over to markers broke the
command line recording of ftrace. This patch fixes it again.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-26 22:51:49 +02:00
Steven Rostedt 4902f8849d ftrace: move ftrace_special to trace.c
Move the ftrace_special out of sched_switch to trace.c.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: pq@iki.fi
Cc: proski@gnu.org
Cc: sandmann@redhat.com
Cc: a.p.zijlstra@chello.nl
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-26 22:51:09 +02:00
Mathieu Desnoyers 5b82a1b08a Port ftrace to markers
Porting ftrace to the marker infrastructure.

Don't need to chain to the wakeup tracer from the sched tracer, because markers
support multiple probes connected.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
CC: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-23 22:29:25 +02:00
Steven Rostedt 25b0b44a1c ftrace: fix comm on function trace output
In cleaning up of the sched_switch code, the function trace recording
of task comms was removed. This patch adds back the recording of comms
for function trace. The output of ftrace now has the task comm instead
of <...>.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-23 21:52:12 +02:00
Ingo Molnar 4d9493c90f ftrace: remove add-hoc code
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-23 21:13:32 +02:00
Ingo Molnar 88a4216c3e ftrace: sched special
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-23 21:08:47 +02:00
Ingo Molnar d9af56fbd8 ftrace: fix cmdline tracing
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-23 21:07:57 +02:00
Ingo Molnar 4ac3ba41d3 ftrace: trace scheduler rbtree
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-23 21:07:31 +02:00
Ingo Molnar 4e65551905 ftrace: sched tracer, trace full rbtree
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-23 21:04:44 +02:00
Ingo Molnar 57422797dc ftrace: add wakeup events to sched tracer
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-23 21:04:06 +02:00
Ingo Molnar e309b41dd6 ftrace: remove notrace
now that we have a kbuild method for notrace, no need to pollute the
C code with the annotations.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-23 20:58:28 +02:00
Ingo Molnar 750ed1a407 ftrace: timestamp syncing, prepare
rename and uninline now() to ftrace_now().

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-23 20:42:31 +02:00
Steven Rostedt 60a11774b3 ftrace: add self-tests
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-23 20:40:36 +02:00
Steven Rostedt 18cef379d3 ftrace: don't use raw_local_irq_save/restore
Using raw_local_irq_save/restore confuses lockdep.
It's fine to use the normal ones.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-23 20:40:05 +02:00
Steven Rostedt 35e8e302e5 ftrace: add tracing of context switches
This patch adds context switch tracing, of the format of:

                  _------=> CPU#
                 / _-----=> irqs-off
                | / _----=> need-resched
                || / _---=> hardirq/softirq
                ||| / _--=> preempt-depth
                |||| /
                |||||     delay
    cmd     pid ||||| time  |      pid:prio:state
       \   /    |||||   \   |      /
  swapper-0     1d..3    137us+:  0:140:R --> 2912:120
     sshd-2912  1d..3    216us+:  2912:120:S --> 0:140
  swapper-0     1d..3    261us+:  0:140:R --> 2912:120
     bash-2920  0d..3    267us+:  2920:120:S --> 0:140
     sshd-2912  1d..3    330us!:  2912:120:S --> 0:140
  swapper-0     1d..3   2389us+:  0:140:R --> 2847:120
 yum-upda-2847  1d..3   2411us!:  2847:120:S --> 0:140
  swapper-0     0d..3  11089us+:  0:140:R --> 3139:120
 gdm-bina-3139  0d..3  11113us!:  3139:120:S --> 0:140
  swapper-0     1d..3 102328us+:  0:140:R --> 2847:120
 yum-upda-2847  1d..3 102348us!:  2847:120:S --> 0:140

 "sched_switch" is added to /debugfs/tracing/available_tracers

[ Eugene Teo <eugeneteo@kernel.sg: remove unused tracing_sched_switch_enabled ]

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-23 20:32:27 +02:00