An fs-thaw ioctl causes deadlock with a chcp or mkcp -s command:
chcp D ffff88013870f3d0 0 1325 1324 0x00000004
...
Call Trace:
nilfs_transaction_begin+0x11c/0x1a0 [nilfs2]
wake_up_bit+0x20/0x20
copy_from_user+0x18/0x30 [nilfs2]
nilfs_ioctl_change_cpmode+0x7d/0xcf [nilfs2]
nilfs_ioctl+0x252/0x61a [nilfs2]
do_page_fault+0x311/0x34c
get_unmapped_area+0x132/0x14e
do_vfs_ioctl+0x44b/0x490
__set_task_blocked+0x5a/0x61
vm_mmap_pgoff+0x76/0x87
__set_current_blocked+0x30/0x4a
sys_ioctl+0x4b/0x6f
system_call_fastpath+0x16/0x1b
thaw D ffff88013870d890 0 1352 1351 0x00000004
...
Call Trace:
rwsem_down_failed_common+0xdb/0x10f
call_rwsem_down_write_failed+0x13/0x20
down_write+0x25/0x27
thaw_super+0x13/0x9e
do_vfs_ioctl+0x1f5/0x490
vm_mmap_pgoff+0x76/0x87
sys_ioctl+0x4b/0x6f
filp_close+0x64/0x6c
system_call_fastpath+0x16/0x1b
where the thaw ioctl deadlocked at thaw_super() when called while chcp was
waiting at nilfs_transaction_begin() called from
nilfs_ioctl_change_cpmode(). This deadlock is 100% reproducible.
This is because nilfs_ioctl_change_cpmode() first locks sb->s_umount in
read mode and then waits for unfreezing in nilfs_transaction_begin(),
whereas thaw_super() locks sb->s_umount in write mode. The locking of
sb->s_umount here was intended to make snapshot mounts and the downgrade
of snapshots to checkpoints exclusive.
This fixes the deadlock issue by replacing the sb->s_umount usage in
nilfs_ioctl_change_cpmode() with a dedicated mutex which protects snapshot
mounts.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ns_r_segments_percentage is read from the disk. Bogus or malicious
value could cause integer overflow and malfunction due to meaningless
disk usage calculation. This patch reports error when mounting such
bogus volumes.
Signed-off-by: Haogang Chen <haogangchen@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Moves s_next_generation counter and a spinlock protecting it to nilfs
object from nilfs_sb_info structure.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Moves s_inode_lock spinlock and s_dirty_files list to nilfs object
from nilfs_sb_info structure.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
At present, the same warning message can be output twice when nilfs
detected a problem on super blocks:
NILFS warning: broken superblock. using spare superblock.
NILFS warning: broken superblock. using spare superblock.
...
This is because these super blocks are reloaded with the block size
written in a super block if it differs from the first block size, but
this repetition looks somewhat confusing. So, we hint at what is
going on by appending block size information to those messages.
Reported-by: Wakko Warner <wakko@animx.eu.org>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
nilfs_dat_inode function was a wrapper to switch between normal dat
inode and gcdat, a clone of the dat inode for garbage collection.
This function got obsolete when the gcdat inode was removed, and now
we can access the dat inode directly from a nilfs object. So, we will
unfold the wrapper and remove it.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: (36 commits)
nilfs2: eliminate sparse warning - "context imbalance"
nilfs2: eliminate sparse warnings - "symbol not declared"
nilfs2: get rid of bdi from nilfs object
nilfs2: change license of exported header file
nilfs2: add bdev freeze/thaw support
nilfs2: accept 64-bit checkpoint numbers in cp mount option
nilfs2: remove own inode allocator and destructor for metadata files
nilfs2: get rid of back pointer to writable sb instance
nilfs2: get rid of mi_nilfs back pointer to nilfs object
nilfs2: see state of root dentry for mount check of snapshots
nilfs2: use iget for all metadata files
nilfs2: get rid of GCDAT inode
nilfs2: add routines to redirect access to buffers of DAT file
nilfs2: add routines to roll back state of DAT file
nilfs2: add routines to save and restore bmap state
nilfs2: do not allocate nilfs_mdt_info structure to gc-inodes
nilfs2: allow nilfs_clear_inode to clear metadata file inodes
nilfs2: get rid of snapshot mount flag
nilfs2: simplify life cycle management of nilfs object
nilfs2: do not allocate multiple super block instances for a device
...
Nilfs now can use sb->s_bdi to get backing_dev_info, so we use it
instead of ns_bdi on the nilfs object and remove ns_bdi.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Nilfs object holds a back pointer to a writable super block instance
in nilfs->ns_writer, and this became eliminable since sb is now made
per device and all inodes have a valid pointer to it.
This deletes the ns_writer pointer and a reader/writer semaphore
protecting it.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
After applied the patch that unified sb instances, root dentry of
snapshots can be left in dcache even after their trees are unmounted.
The orphan root dentry/inode keeps a root object, and this causes
false positive of nilfs_checkpoint_is_mounted function.
This resolves the issue by having nilfs_checkpoint_is_mounted test
whether the root dentry is busy or not.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This makes use of iget5_locked to allocate or get inode for metadata
files to stop using own inode allocator.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This applies prepared rollback function and redirect function of
metadata file to DAT file, and eliminates GCDAT inode.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This stops pre-allocating nilfs object in nilfs_get_sb routine, and
stops managing its life cycle by reference counting.
nilfs_find_or_create_nilfs() function, nilfs->ns_mount_mutex,
nilfs_objects list, and the reference counter will be removed through
the simplification.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This stops allocating multiple super block instances for a device.
All snapshots and a current mode mount (i.e. latest tree) will be
controlled with nilfs_root objects that are kept within an sb
instance.
nilfs_get_sb() is rewritten so that it always has a root object for
the latest tree and snapshots make additional root objects.
The root dentry of the latest tree is binded to sb->s_root even if it
isn't attached on a directory. Root dentries of snapshots or the
latest tree are binded to mnt->mnt_root on which they are mounted.
With this patch, nilfs_find_sbinfo() function, nilfs->ns_supers list,
and nilfs->ns_current back pointer, are deleted. In addition,
init_nilfs() and load_nilfs() are simplified since they will be called
once for a device, not repeatedly called for mount points.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This rewrites nilfs_checkpoint_is_mounted() function so that it
decides whether a checkpoint is mounted by whether the corresponding
root object is found in checkpoint tree.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
To hold multiple versions of a filesystem in one sb instance, a new
on-memory structure is necessary to handle one or more checkpoints.
This adds a red-black tree of checkpoints to nilfs object, and adds
lookup and create functions for them.
Each checkpoint is represented by "nilfs_root" structure, and this
structure has rb_node to configure the rb-tree.
The nilfs_root object is identified with a checkpoint number. For
each snapshot, a nilfs_root object is allocated and the checkpoint
number of snapshot is assigned to it. For a regular mount
(i.e. current mode mount), NILFS_CPTREE_CURRENT_CNO constant is
assigned to the corresponding nilfs_root object.
Each nilfs_root object has an ifile inode and some counters. These
items will displace those of nilfs_sb_info structure in successive
patches.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This uses inode hash function that vfs provides instead of the own
hash table for caching gc inodes. This finally removes the own inode
hash from nilfs.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Compatibility of nilfs partitions is now managed with three feature
sets. This changes old compatibility check with revision number so
that it can accept future revisions.
Note that we can stop support of experimental versions of nilfs that
doesn't know the feature sets by incrementing NILFS_CURRENT_REV. We
don't have to do it soon, but it would be a possible option whenever
the need arises.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
All the blkdev_issue_* helpers can only sanely be used for synchronous
caller. To issue cache flushes or barriers asynchronously the caller needs
to set up a bio by itself with a completion callback to move the asynchronous
state machine ahead. So drop the BLKDEV_IFL_WAIT flag that is always
specified when calling blkdev_issue_* and also remove the now unused flags
argument to blkdev_issue_flush and blkdev_issue_zeroout. For
blkdev_issue_discard we need to keep it for the secure discard flag, which
gains a more descriptive name and loses the bitops vs flag confusion.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Switch to the WRITE_FLUSH_FUA flag for log writes, remove the EOPNOTSUPP
detection for barriers and stop setting the barrier flag for discards.
tj: nilfs is now fixed to wait for discard completion. Updated this
patch accordingly and dropped warning about it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
If load_nilfs() gets an error while doing recovery, it will fail to
free the shadow inode of dat (nilfs->ns_gc_dat).
This fixes the leak issue.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
nilfs_discard_segment() doesn't wait for completion of discard
requests. This specifies BLKDEV_IFL_WAIT flag when calling
blkdev_issue_discard() in order to fix the sync failure.
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Christoph Hellwig <hch@lst.de>
After applying commit b2ac86e1, the following message got appeared
after unclean shutdown:
> NILFS warning: broken superblock. using spare superblock.
This turns out to be a false message due to the change which updates
two super blocks alternately. The secondary super block now can be
selected if it's newer than the primary one.
This kills the false warning by suppressing it if another super block
is not actually broken.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This inserts sanity check that refuses to mount a filesystem with
unsupported block size.
Previously, kernel code of nilfs was looking only limitation of
devices though mkfs.nilfs2 limits the range of block sizes; there was
no check that prevents rec_len overflow with larger block sizes.
With this change, block sizes larger than 64KB or smaller than 1KB
will get rejected explicitly by kernel.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This forces nilfs to check compatibility of feature flags so as to
reject a filesystem with unknown features when it mounts or remounts
the filesystem.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Super blocks of nilfs are periodically overwritten in order to record
the recent log position. This shortens recovery time after unclean
unmount, but the current implementation performs the update even for a
few blocks of change. If the filesystem gets small changes slowly and
continually, super blocks may be updated excessively.
This moderates the issue by skipping update of log cursor if it does
not cross a segment boundary.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Although nilfs redundantly uses two super blocks and each may point to
different position on log, the current version of nilfs does not try
fallback to the spare super block when it doesn't find any valid log
at the position that the primary super block points to.
This has been a cause of mount failures due to write order reversals
on barrier less block devices.
This inserts fallback code in error path of nilfs_search_super_root
routine to resolve the mount failure problem.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This separates a setup routine of log cursor from init_nilfs(). The
routine, nilfs_store_log_cursor, reads the last position of the log
containing a super root, and initializes relevant state on the nilfs
object.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This will sync super blocks in turns instead of syncing duplicate
super blocks at the time. This will help searching valid super root
when super block is written into disk before log is written, which is
happen when barrier-less block devices are unmounted uncleanly. In
the situation, old super block likely points to valid log.
This patch introduces ns_sbwcount member to the nilfs object and adds
nilfs_sb_will_flip() function; ns_sbwcount counts how many times super
blocks write back to the disk. And, nilfs_sb_will_flip() decides
whether flipping required or not based on the count of ns_sbwcount to
sync super blocks asymmetrically.
The following functions are also changed:
- nilfs_prepare_super(): flips super blocks according to the
argument. The argument is calculated by nilfs_sb_will_flip()
function.
- nilfs_cleanup_super(): sets "clean" flag to both super blocks if
they point to the same checkpoint.
To update both of super block information, caller of
nilfs_commit_super must set the information on both super blocks.
Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This function write out filesystem state to super blocks in order to
share the same cleanup work. This is a preparation for making super
block writeback alternately.
Cc: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
The function name of nilfs_recover_logical_segments makes no sense.
This changes the name into nilfs_salvage_orphan_logs to clarify the
role of the function.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Most functions in recovery code take an argument of a super block
instance or a nilfs_sb_info struct for convenience sake.
This replaces them aggressively with a nilfs object by applying
__bread and __breadahead against routines using sb_bread and
sb_breadahead.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This stores blocksize in nilfs objects for the successive refactoring
of recovery logic.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Nilfs maintains two super blocks, and selects the new one on mount
time if they both have valid checksums and their timestamps differ.
However, this has potential for mis-selection since the system clock
may be rewinded and the resolution of the timestamps is not high.
Usually this doesn't become an issue because both super blocks are
updated at the same time when the file system is unmounted. Even if
the file system wasn't unmounted cleanly, the roll-forward recovery
will find the proper log which stores the latest super root. Thus,
the issue can appear only if update of one super block fails and the
clock happens to be rewinded.
This fixes the issue by using checkpoint numbers instead of timestamps
to pick the super block storing the location of the latest log.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
After merging the block tree, today's linux-next build (powerpc ppc64_defconfig)
failed like this:
fs/nilfs2/the_nilfs.c: In function 'nilfs_discard_segments':
fs/nilfs2/the_nilfs.c:673: error: 'DISCARD_FL_BARRIER' undeclared (first use in this function)
Caused by commit fbd9b09a17 ("blkdev:
generalize flags for blkdev_issue_fn functions") interacting with commit
e902ec9906 ("nilfs2: issue discard request
after cleaning segments") (which netered Linus' tree on about March 4 -
before v2.6.34-rc1).
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
This kills the following checkpatch warnings:
WARNING: unnecessary whitespace before a quoted newline
#869: FILE: super.c:869:
+ "remount to a different snapshot. \n",
WARNING: unnecessary whitespace before a quoted newline
#389: FILE: the_nilfs.c:389:
+ printk(KERN_ERR "NILFS: too short segment. \n");
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This adds a function to send discard requests for given array of
segment numbers, and calls the function when garbage collection
succeeded.
Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This adds "norecovery" mount option which disables temporal write
access to read-only mounts or snapshots during mount/recovery.
Without this option, write access will be even performed for those
types of mounts; the temporal write access is needed to mount root
file system read-only after an unclean shutdown.
This option will be helpful when user wants to prevent any write
access to the device.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Eric Sandeen <sandeen@redhat.com>
This adds a helper function, nilfs_valid_fs() which returns if nilfs
is in a valid state or not.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Although mount recovery of nilfs is integrated in load_nilfs()
procedure, the completion of recovery was isolated from the procedure
and performed at the end of the fill_super routine.
This was somewhat confusing since the recovery is needed for the nilfs
object, not for a super block instance.
To resolve the inconsistency, this will integrate the recovery
completion into load_nilfs().
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Previously, this function took an status code to return possible error
codes. The ("nilfs2: add local variable to cache the number of clean
segments") patch removed the possibility to return errors.
So, this simplifies the function definition to make it directly return
the number of clean segments.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This will hide a function call of nilfs_mdt_clear() in
nilfs_mdt_destroy().
This ensures nilfs_mdt_destroy() to do cleanup jobs included in
nilfs_mdt_clear().
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Ryusuke Konishi
Haogang Chen
Linus Torvalds
Jens Axboe
Christoph Hellwig
Christoph Hellwig
Jiro SEKIBA
Jens Axboe
Stephen Rothwell