Граф коммитов

34 Коммитов

Автор SHA1 Сообщение Дата
Masahiro Yamada 5c8166419a kbuild: replace $(if A,A,B) with $(or A,B)
$(or ...) is available since GNU Make 3.81, and useful to shorten the
code in some places.

Covert as follows:

  $(if A,A,B)  -->  $(or A,B)

This patch also converts:

  $(if A, A, B) --> $(or A, B)

Strictly speaking, the latter is not an equivalent conversion because
GNU Make keeps spaces after commas; if A is not empty, $(if A, A, B)
expands to " A", while $(or A, B) expands to "A".

Anyway, preceding spaces are not significant in the code hunks I touched.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2022-02-15 12:25:56 +09:00
Quanyang Wang bc2e9578ba
spi: tools: make a symbolic link to the header file spi.h
The header file spi.h in include/uapi/linux/spi is needed for spidev.h,
so we also need make a symbolic link to it to eliminate the error message
as below:

In file included from spidev_test.c:24:
include/linux/spi/spidev.h:28:10: fatal error: linux/spi/spi.h: No such file or directory
   28 | #include <linux/spi/spi.h>
      |          ^~~~~~~~~~~~~~~~~
compilation terminated.

Fixes: f7005142da ("spi: uapi: unify SPI modes into a single spi.h")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Link: https://lore.kernel.org/r/20210422102604.3034217-1-quanyang.wang@windriver.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-22 16:30:39 +01:00
Qing Zhang bd2077915b
spi: tools: Make default_tx/rx and input_tx static
Fix the following sparse warning:

./spidev_test.c:50:9: warning: symbol 'default_tx' was not declared. Should it be static?
./spidev_test.c:59:9: warning: symbol 'default_rx' was not declared. Should it be static?
./spidev_test.c:60:6: warning: symbol 'input_tx' was not declared. Should it be static?

Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Link: https://lore.kernel.org/r/1591880212-13479-1-git-send-email-zhangqing@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-11 16:27:24 +01:00
Geert Uytterhoeven 9ec8ade812
spi: spidev_test: Use %u to format unsigned numbers
Consistently use %u to format unsigned numbers.
For "bits" this doesn't matter that much, as it is "uint8_t".
However, "speed" is "uint32_t", so in case people use "-s -1" to force
the maximum, they would see:

    max speed: -1 Hz (4294967 KHz)

While at it, use "k" (kilo) instead of "K" (kelvin) in "kHz".

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200608100049.30648-1-geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-08 13:42:44 +01:00
Geert Uytterhoeven 896fa73508
spi: spidev_test: Add support for Octal mode data transfers
Add support for octal transfers using the -8/--octal command line
parameter.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200416101835.14573-3-geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-04-16 13:54:45 +01:00
Tiezhu Yang 0b93dd98d6
spi: spidev_test: Remove hidden temporary file when make clean
In the current code, it only removes *.o and .*.o.d file when make clean,
there still exists useless .*.o.cmd file, just remove it.

Without this patch:

[yangtiezhu@linux spi]$ make
[yangtiezhu@linux spi]$ make clean
[yangtiezhu@linux spi]$ ls -1 .*.o.cmd
.spidev_fdx-in.o.cmd
.spidev_fdx.o.cmd
.spidev_test-in.o.cmd
.spidev_test.o.cmd

With this patch:

[yangtiezhu@linux spi]$ make
[yangtiezhu@linux spi]$ make clean
[yangtiezhu@linux spi]$ ls -1 .*.o.cmd
ls: cannot access .*.o.cmd: No such file or directory

Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/1586230512-5507-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-04-14 18:36:29 +01:00
Linus Torvalds ff2ae607c6 SPDX patches for 5.7-rc1.
Here are 3 SPDX patches for 5.7-rc1.
 
 One fixes up the SPDX tag for a single driver, while the other two go
 through the tree and add SPDX tags for all of the .gitignore files as
 needed.
 
 Nothing too complex, but you will get a merge conflict with your current
 tree, that should be trivial to handle (one file modified by two things,
 one file deleted.)
 
 All 3 of these have been in linux-next for a while, with no reported
 issues other than the merge conflict.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXodg5A8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykySQCgy9YDrkz7nWq6v3Gohl6+lW/L+rMAnRM4uTZm
 m5AuCzO3Azt9KBi7NL+L
 =2Lm5
 -----END PGP SIGNATURE-----

Merge tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx

Pull SPDX updates from Greg KH:
 "Here are three SPDX patches for 5.7-rc1.

  One fixes up the SPDX tag for a single driver, while the other two go
  through the tree and add SPDX tags for all of the .gitignore files as
  needed.

  Nothing too complex, but you will get a merge conflict with your
  current tree, that should be trivial to handle (one file modified by
  two things, one file deleted.)

  All three of these have been in linux-next for a while, with no
  reported issues other than the merge conflict"

* tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
  ASoC: MT6660: make spdxcheck.py happy
  .gitignore: add SPDX License Identifier
  .gitignore: remove too obvious comments
2020-04-03 13:12:26 -07:00
Masahiro Yamada d198b34f38 .gitignore: add SPDX License Identifier
Add SPDX License Identifier to all .gitignore files.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25 11:50:48 +01:00
Tiezhu Yang aea7afd907
spi: spidev_test: Remove the whole "include" directory when make clean
In the current code, it only removes "include/linux/spi/spidev.h" file
when make clean and there still exists useless "include/linux/spi/"
directory, just remove it.

Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/1581567368-8055-4-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-02-13 13:17:59 +00:00
Tiezhu Yang 470a072e12
spi: spidev_test: Use perror() only if errno is not 0
It is better to use perror() only if errno is not 0, it should use printf()
when errno is 0, otherwise there exists redudant ": Success".

E.g. without this patch:

$ ./spidev_test -p 1234 --input test.bin
only one of -p and --input may be selected: Success
Aborted (core dumped)

With this patch:

$ ./spidev_test -p 1234 --input test.bin
only one of -p and --input may be selected
Aborted (core dumped)

Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/1581567368-8055-3-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-02-13 13:17:39 +00:00
Tiezhu Yang 1f3c36328a
spi: spidev_test: Check input_tx and input_file first after parse options
It is better to check input_tx and input_file first after parse options.
Otherwise, it will do some useless operations when both -p and --input
are selected.

Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/1581567368-8055-2-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-02-13 13:17:19 +00:00
Tiezhu Yang 020bd6c48e
spi: spidev_test: Remove break after exit statement
When call print_usage() in parse_opts(), it will exit directly.
Since break is not useful after exit statement, remove it.

Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/1581567368-8055-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-02-13 13:16:59 +00:00
Thomas Gleixner 84a14ae8c4 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 178
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 24 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528170026.162703968@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:29:19 -07:00
Thomas Gleixner ec8f24b7fa treewide: Add SPDX license identifier - Makefile/Kconfig
Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:46 +02:00
Geert Uytterhoeven 35386dfd13
spi: spidev_test: Improve decoded text part of hex dump
- Print spaces as spaces,
  - Do not print characters > 126, as they will be shown as garbage
    in the modern UTF-8 era,
  - Use a normal period instead of its hexadecimal ASCII value,
  - Delimit the text part with pipe symbols on both sides (was left side
    only), without any spaces, to make it clear where the decoded text
    starts and ends,
  - Drop a useless comment.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-04 17:00:37 +01:00
Martin Kelly 7ed1c1901f tools: fix cross-compile var clobbering
Currently a number of Makefiles break when used with toolchains that
pass extra flags in CC and other cross-compile related variables (such
as --sysroot).

Thus we get this error when we use a toolchain that puts --sysroot in
the CC var:

  ~/src/linux/tools$ make iio
  [snip]
  iio_event_monitor.c:18:10: fatal error: unistd.h: No such file or directory
    #include <unistd.h>
             ^~~~~~~~~~

This occurs because we clobber several env vars related to
cross-compiling with lines like this:

  CC = $(CROSS_COMPILE)gcc

Although this will point to a valid cross-compiler, we lose any extra
flags that might exist in the CC variable, which can break toolchains
that rely on them (for example, those that use --sysroot).

This easily shows up using a Yocto SDK:

  $ . [snip]/sdk/environment-setup-cortexa8hf-neon-poky-linux-gnueabi

  $ echo $CC
  arm-poky-linux-gnueabi-gcc -march=armv7-a -mfpu=neon -mfloat-abi=hard
  -mcpu=cortex-a8
  --sysroot=[snip]/sdk/sysroots/cortexa8hf-neon-poky-linux-gnueabi

  $ echo $CROSS_COMPILE
  arm-poky-linux-gnueabi-

  $ echo ${CROSS_COMPILE}gcc
  krm-poky-linux-gnueabi-gcc

Although arm-poky-linux-gnueabi-gcc is a cross-compiler, we've lost the
--sysroot and other flags that enable us to find the right libraries to
link against, so we can't find unistd.h and other libraries and headers.
Normally with the --sysroot flag we would find unistd.h in the sdk
directory in the sysroot:

  $ find [snip]/sdk/sysroots -path '*/usr/include/unistd.h'
  [snip]/sdk/sysroots/cortexa8hf-neon-poky-linux-gnueabi/usr/include/unistd.h

The perf Makefile adds CC = $(CROSS_COMPILE)gcc if and only if CC is not
already set, and it compiles correctly with the above toolchain.

So, generalize the logic that perf uses in the common Makefile and
remove the manual CC = $(CROSS_COMPILE)gcc lines from each Makefile.

Note that this patch does not fix cross-compile for all the tools (some
have other bugs), but it does fix it for all except usb and acpi, which
still have other unrelated issues.

I tested both with and without the patch on native and cross-build and
there appear to be no regressions.

Link: http://lkml.kernel.org/r/20180107214028.23771-1-martin@martingkelly.com
Signed-off-by: Martin Kelly <martin@martingkelly.com>
Acked-by: Mark Brown <broonie@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Pali Rohar <pali.rohar@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Robert Moore <robert.moore@intel.com>
Cc: Lv Zheng <lv.zheng@intel.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Valentina Manea <valentina.manea.m@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-21 15:35:42 -08:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Andy Shevchenko e9d4650dcc spi: tools: add install section
Allow user to call install target.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-07-26 12:25:28 +01:00
Andy Shevchenko f325b73dc4 spi: tools: move to tools buildsystem
There is a nice buildsystem dedicated for userspace tools in Linux kernel tree.
Switch spi target to be built by it.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-07-26 12:25:23 +01:00
Frode Isaksen 9006a7b322 spi: spidev_test: add option to continuously transfer data
Add option to send+recv <size> bytes with <iter> iterations
and show the transfer rate every 5 seconds.
Example:
rate: tx 4235.2kbps, rx 4235.2kbps
total: tx 4882.8KB, rx 4882.8KB

Signed-off-by: Frode Isaksen <fisaksen@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-21 18:44:40 +00:00
Michal Vokáč e634b76caf spi: spidev_test: Fix input file check when transferring file
Check the input file fd instead of spidev fd.
The spidev fd is supposed to be OK otherwise the transfer_file() function
would not be called at all.

Signed-off-by: Michal Vokáč <vokac.m@gmail.com>
Reviewed-by: Joshua Clayton <stillcompiling@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-04 09:56:09 -06:00
Mark Brown 2ce0468433 Merge remote-tracking branches 'spi/topic/ti-qspi', 'spi/topic/tools', 'spi/topic/txx9' and 'spi/topic/xlp' into spi-next 2016-09-30 09:14:22 -07:00
Mark Brown 3424ff29a0 Merge remote-tracking branches 'spi/topic/rspi', 'spi/topic/sc18is602', 'spi/topic/sh-msiof', 'spi/topic/spidev-test' and 'spi/topic/st-ssc4' into spi-next 2016-09-30 09:14:18 -07:00
Geert Uytterhoeven 0278b34bf1 spi: spidev_test: Fix buffer overflow in unescape()
Sometimes spidev_test crashes with:

    *** Error in `spidev_test': munmap_chunk(): invalid pointer: 0x00022020 ***
    Aborted

or just

    Segmentation fault

This is due to transfer_escaped_string() miscalculating the required
size of the buffer by one byte, causing a buffer overflow in unescape().

Drop the bogus "+ 1" in the strlen() parameter to fix this.

Note that unescape() never copies the zero-terminator of the source
string, so it writes at most as many bytes as the length of the source
string.

Fixes: 30061915be (spi: spidev_test: Added input buffer from the terminal)
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org> # v4.5+
2016-09-14 16:22:43 +01:00
Jorge Ramirez-Ortiz 2a4635ea1d spi: tools: enable CROSS_COMPILE in Makefile
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12 20:02:25 +01:00
Baruch Siach 8736f8022e spi: spidev_test: fix build with musl libc
spidev.h uses _IOC_SIZEBITS directly. musl libc does not provide this macro
unless linux/ioctl.h is included explicitly. Fixes build failures like:

In file included from .../host/usr/arm-buildroot-linux-musleabihf/sysroot/usr/include/sys/ioctl.h:7:0,
                 from .../build/spidev_test-v3.15/spidev_test.c:20:
.../build/spidev_test-v3.15/spidev_test.c: In function ‘transfer’:
.../build/spidev_test-v3.15/spidev_test.c:75:18: error: ‘_IOC_SIZEBITS’ undeclared (first use in this function)
  ret = ioctl(fd, SPI_IOC_MESSAGE(1), &tr);
                  ^

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-15 14:23:55 +01:00
Fabio Estevam edd3899c8c spi: spidev_test: Fix typo in error message
Fix the spelling of 'output' in the error message.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-08 17:58:56 +00:00
Joshua Clayton de2c6e5855 spi: tools: move spidev_test metadata
Now that spidev_test and spidev_fdx have been moved, remove them
from the Documentation index and move their .gitignore file.

Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-30 12:14:12 +00:00
Joshua Clayton b2cfc90428 spi: spidev_test: fix whitespace
Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-23 14:54:01 +00:00
Joshua Clayton a20874f78b spi: spidev_test: check error
Check the result of sscanf to verify a result was found.
report and error and abort if pattern was not found.

Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-23 14:54:01 +00:00
Joshua Clayton 983b27886a spi: spidev_test: output to a file
For testing of larger data transfers, output unmodified data
directly to a file.

Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-23 14:54:01 +00:00
Joshua Clayton 7af475a5b5 spi: spidev_test: accept input from a file
Add input file support to facilitate testing larger data.

Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-23 14:54:01 +00:00
Joshua Clayton 5c437a401b spi: spidev_test: transfer_escaped_string function
Move the input_tx code into its own small function.
This cleans up some variables from main() that are used only here.
While we are at it, check malloc calls instead of assuming they succeed.

Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-23 14:54:01 +00:00
Joshua Clayton 5eca4d843f spi: Move spi code from Documentation to tools
Jon Corbet requested this code moved with the last changeset,
https://lkml.org/lkml/2015/3/1/144,
but the patch was not applied because it missed the Makefile.
Moved spidev_test, spidev_fdx and their Makefile infrastructure.

Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-23 14:54:01 +00:00